Related
Good day all
I have been running CM 10.2 on my One for some months. Recently its started playing up so ive decided to go back to stock.
Ive googled the process. Fastboot works OK and see's my One connected OK.
Im having issues figuring out what RUU I should be downloading. Initially I went for RUU_M7_U_JB_50_HTC_Europe_1.29.401.2
After a number of minutes it failed and said something like it cannot use this on my phone. My phone is a UK purchased unlocked device. Can anyone point me at the correct RUUI should download?
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
phupton said:
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
Click to expand...
Click to collapse
you won't get much help till you post your fastboot getvar all results
minus your serial no and IEMI
clsA said:
you won't get much help till you post your fastboot getvar all results
minus your serial no and IEMI
Click to expand...
Click to collapse
Thanks for the starter...
form-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 00000000000
(bootloader) imei: 0000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4103mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
phupton said:
Thanks for the starter...
form-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
finished. total time: 0.080s
Click to expand...
Click to collapse
You can flash this (compatible with your firmware, CID & MID): http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
if you want to receive OTAs, you'll need to select "stock recovery" (which will overwrite custom recovery).
nkk71 said:
You can flash this (compatible with your firmware, CID & MID): http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
if you want to receive OTAs, you'll need to select "stock recovery" (which will overwrite custom recovery).
Click to expand...
Click to collapse
Happy to go totally stock. Ive unlocked my bootloader again this morning. How would I flash the zip file you have directed me to download. Apologies for my newbie/dangerous ignorance...
phupton said:
Happy to go totally stock. Ive unlocked my bootloader again this morning. How would I flash the zip file you have directed me to download. Apologies for my newbie/dangerous ignorance...
Click to expand...
Click to collapse
by flashing it in custom recovery (CWM or TWRP), just like any custom ROM.
nkk71 said:
by flashing it in custom recovery (CWM or TWRP), just like any custom ROM.
Click to expand...
Click to collapse
My phone will only boot to fastboot at the moment. ITs partially bricked. Any pointers on how to get CWM installed?
phupton said:
My phone will only boot to fastboot at the moment. ITs partially bricked. Any pointers on how to get CWM installed?
Click to expand...
Click to collapse
If you have unlocked bootloaders then download twrp or cwm and rename to recovery put the file in the fastboot folder.
Then type fastboot flash recovery recovery.img
this will flash the custom recovery.
http://forum.xda-developers.com/showthread.php?t=2173863 - CWM
http://forum.xda-developers.com/showthread.php?t=2247900 - TWRP
khandelwalsiddharth said:
If you have unlocked bootloaders then download twrp or cwm and rename to recovery put the file in the fastboot folder.
Then type fastboot flash recovery recovery.img
this will flash the custom recovery.
http://forum.xda-developers.com/showthread.php?t=2173863 - CWM
http://forum.xda-developers.com/showthread.php?t=2247900 - TWRP
Click to expand...
Click to collapse
Thanks. I should be able to get a custom recovery sorted pretty quick. Can you just give me a bit of a pointer on the flashing of the stock rom mentioned earleir
phupton said:
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
Click to expand...
Click to collapse
bro hboot 1.54 isn't supported for RUU. u have 2 downgrade 2 hboot 1.44 to use the RUU. follow nkk71's post on returning to stock
phupton said:
Thanks. I should be able to get a custom recovery sorted pretty quick. Can you just give me a bit of a pointer on the flashing of the stock rom mentioned earleir
Click to expand...
Click to collapse
Do one thing install a custom rom like ARHD etc. and then S-off your phone using rumrunner.
This is going to be one of those jobs that just fails and all I end up with is a bricked phone.
I am a mac user and was using a windows XP VM to communicate with me phone using fast boot... When I try to push a recovery image XP fails badly and reboots...
I can't boot camp my mac because I'm running without a CD drive and boot camp needs a CD drive before installation.
Any tips on how to get my phone sorted using a mac?
phupton said:
This is going to be one of those jobs that just fails and all I end up with is a bricked phone.
I am a mac user and was using a windows XP VM to communicate with me phone using fast boot... When I try to push a recovery image XP fails badly and reboots...
I can't boot camp my mac because I'm running without a CD drive and boot camp needs a CD drive before installation.
Any tips on how to get my phone sorted using a mac?
Click to expand...
Click to collapse
1- just use mac versions of fastboot & adb, i believe you can find them here: http://forum.xda-developers.com/showthread.php?t=2365506
(or google for them)
2- do you care about having your phone "out-of-the-box"? that entails much more work.Can you live with an UNLOCKED or RELOCKED bootloader, and possibly the TAMPERED sign?
3- if you don't care about ^^ (2), then just use the Guru Reset ROM, i linked before.
get adb and fastboot working on mac, then in bootloader/FASTBOOT USB:
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter recovery
adb push <name of guru>.zip /data/media/0/
then in recovery choose "install" and select the Guru Reset ROM.
Ok so i reloaded the recovery image. Rebooted and hey presto Cyanogenmod 10.2 loaded again. Phone is now working BUT I would still like to go back to stock.
With that in mind I followed your instructions above and tried to load the Guru zip on to the SDCARD. The ADB process finishes and it says its copied the file over but I can never seem to find it whe i load the recovery and try to install from a zip file.
Questions. Am I right in thinking I can continue to load the Guru zip to attempt to get back to stock?
What am i doing wrong?
phupton said:
Ok so i reloaded the recovery image. Rebooted and hey presto Cyanogenmod 10.2 loaded again. Phone is now working BUT I would still like to go back to stock.
With that in mind I followed your instructions above and tried to load the Guru zip on to the SDCARD. The ADB process finishes and it says its copied the file over but I can never seem to find it whe i load the recovery and try to install from a zip file.
Questions. Am I right in thinking I can continue to load the Guru zip to attempt to get back to stock?
What am i doing wrong?
Click to expand...
Click to collapse
if your phone is booting up again
just copy the guru.zip to the phone storage from your mac
no need to "push" if your phone is booting up
To confirm, I am now copying the zip over.
Is there a chance of me bricking the phone again or will the Guru zip return the phone to stock and allow OTA updates?
phupton said:
To confirm, I am now copying the zip over.
Is there a chance of me bricking the phone again or will the Guru zip return the phone to stock and allow OTA updates?
Click to expand...
Click to collapse
yeah the Guru reset was designed to put the phone back to stock
it uses an Aroma installer .. choose Stock Recovery to be able to receive OTA in the future. but you won't be able to flash any custom roms or Root with the stock recovery
that seemed to do the trick. phone is back stock.
after initial setup t imediately downloaded and installed a small update. rebooted and then asked to download another 4.3 675mb big update. that one seemed to reset the devce to new again. after setup the 2nd time i can see it didnt work as the phone was as if i had just completed the guru install...
thoughts?
phupton said:
that seemed to do the trick. phone is back stock.
after initial setup t imediately downloaded and installed a small update. rebooted and then asked to download another 4.3 675mb big update. that one seemed to reset the devce to new again. after setup the 2nd time i can see it didnt work as the phone was as if i had just completed the guru install...
thoughts?
Click to expand...
Click to collapse
did the second update give an error or just didn't take ?
I can't install any recovery TWRP from version 2.7.x.x+, etc, I can install, but when I try run recovery I see only Entering recovery, black screen for few seconds then again entering recovery and htc logo. When I install twrp 2.6.3.3 all works perfectly, I don't know what is wrong.. I trying fastboot metod and comend fastboot erase cache, didn't help. What Can I do now? I Try use flashify and more more more, I have a root, unlock bootloader, s-on. When I try instalation cwm or cwm touch the newest is the same problem, but I need this twrp, because I wanna try new rom port from Oneplus One.
THANK U VERY MUCH MAJMOZ AND ALRAY! If u will know how to install twrp 2.7.0.0+, message me
schizyk12 said:
I can't install any recovery TWRP from version 2.7.x.x+, etc, I can install, but when I try run recovery I see only Entering recovery, black screen for few seconds then again entering recovery and htc logo. When I install twrp 2.6.3.3 all works perfectly, I don't know what is wrong.. I trying fastboot metod and comend fastboot erase cache, didn't help. What Can I do now? I Try use flashify and more more more, I have a root, unlock bootloader, s-on. When I try instalation cwm or cwm touch the newest is the same problem, but I need this twrp, because I wanna try new rom port from Oneplus One.
Click to expand...
Click to collapse
Don't know why they are failing but 2.7.0.0 and 2.7.1.0 have caused problems before. And some people say that 2.7.1.1 can cause issues, I didn't have issue with it but not all phones are created equal. You can try 2.7.1.2, I have used it for the past month or so. I read the OP on the port and they stated the lastest TWRP but you could try the 2.6.3.3 if you cannot get the others to work. I am also assuming that you have a GSM phone not Sprint or Verizon.
majmoz said:
Don't know why they are failing but 2.7.0.0 and 2.7.1.0 have caused problems before. And some people say that 2.7.1.1 can cause issues, I didn't have issue with it but not all phones are created equal. You can try 2.7.1.2, I have used it for the past month or so. I read the OP on the port and they stated the lastest TWRP but you could try the 2.6.3.3 if you cannot get the others to work. I am also assuming that you have a GSM phone not Sprint or Verizon.
Click to expand...
Click to collapse
I try everyone, 2.7.1.3 beta also, everyone.. ;< What Can I do? 2.7.0.0+ and bootlop on htc logo when I try run recovery with inscription entering recovery.. I try flashify, fastboot and many aplications from play store to flash recovery. :< Can I flashed this rom, port from oneplus one other metod?
schizyk12 said:
I try everyone, 2.7.1.3 beta also, everyone.. ;< What Can I do? 2.7.0.0+ and bootlop on htc logo when I try run recovery with inscription entering recovery.. I try flashify, fastboot and many aplications from play store to flash recovery. :< Can I flashed this rom, port from oneplus one other metod?
Click to expand...
Click to collapse
Post a fastboot getvar all except the imei and serialno. What computer are you using Win 7 or Win 8?
majmoz said:
Post a fastboot getvar all except the imei and serialno. What computer are you using Win 7 or Win 8?
Click to expand...
Click to collapse
I use old computer with windows xp, because I post in the official twrp thread, I'm im collage and I use only tablet and phone.
schizyk12 said:
I use old computer with windows xp, because I post in the official twrp thread, I'm im collage and I use only tablet and phone.
Click to expand...
Click to collapse
Microsoft Windows XP [Wersja 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Adam>cd C:\fastboot
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4118mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
C:\fastboot>
schizyk12 said:
I use old computer with windows xp, because I post in the official twrp thread, I'm im collage and I use only tablet and phone.
Click to expand...
Click to collapse
Lets check the basics:
** Double check the MD5 of the recovery to see if it downloaded properly
** Place the recovery.img in the adb/fastboot folder
** Fast boot is disabled in Settings >> Power >> Fast boot
** Boot into Bootloader/FASTBOOT USB
** Type: fastboot devices
You should see your device listed.
** Type: fastboot flash recovery <file-name>.img Replace file name with the actual recovery name.
** Type: fastboot erase cache
** Type: fastboot reboot-bootloader
Now check to see if it worked!
majmoz said:
Lets check the basics:
** Double check the MD5 of the recovery to see if it downloaded properly
** Place the recovery.img in the adb/fastboot folder
** Fast boot is disabled in Settings >> Power >> Fast boot
** Boot into Bootloader/FASTBOOT USB
** Type: fastboot devices
You should see your device listed.
** Type: fastboot flash recovery <file-name>.img Replace file name with the actual recovery name.
** Type: fastboot erase cache
** Type: fastboot reboot-bootloader
Now check to see if it worked!
Click to expand...
Click to collapse
All installation complete final 100%. But twrp doesn't work ;<
schizyk12 said:
All installation complete final 100%. But twrp doesn't work ;<
Click to expand...
Click to collapse
Let try flashing the stock firmware for your phone.
** Find the unlock code you got from HTCDev when you unlocked your bootloader - "Unlock_code.bin" and place in your fastboot folder
** Download stock_firmware 5.11.401.10.zip and rename "firmware.zip" then place in your fastboot folder. Check the MD5: 3b7b13b52f75ed516c888b827710f29a
** Backup your phone to include all of your personal data and copy the files off of your phone.
** Put your phone in bootloader/FASTBOOT USB
Code:
fastboot erase cache
Code:
fastboot oem lock
Code:
[B][I]fastboot oem rebootRUU[/I][/B]
Note: You will see a silver HTC logo on the phone screen
Code:
fastboot flash zip firmware.zip
Note: This will fail with a please flush again message; repeat the same command:
Code:
fastboot flash zip firmware.zip
Note: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Code:
fastboot reboot-bootloader
Note: We need to unlock your bootloader to flash the custom recovery. Using your previous code:
Code:
fastboot flash unlocktoken Unlock_code.bin
Now you should try to flash TWRP, I would try 2.7.1.1 or 2.7.1.2
Hopefully by flashing the stock firmware, it will clean up past flashes to allow the custom recovery to work.
But i'm s-on. I have unlock bootloader, but I Have s-on and I dont know my unlock Code, because before me whose had my HTC and he unlock my device
Any idea?
schizyk12 said:
But i'm s-on. I have unlock bootloader, but I Have s-on and I dont know my unlock Code, because before me whose had my HTC and he unlock my device
Click to expand...
Click to collapse
Here is a step by step guide to unlock your HTC One. There is also a video of the process here. It is pretty straight forward and if you encounter a problem just ask.
But I dont have unlock code and I cant get it
majmoz said:
Here is a step by step guide to unlock your HTC One. There is also a video of the process here. It is pretty straight forward and if you encounter a problem just ask.
Click to expand...
Click to collapse
But I dont have unlock code, and I cant get it
schizyk12 said:
But I dont have unlock code, and I cant get it
Click to expand...
Click to collapse
The procedure in my last post is for getting the code after you flash the firmware!
majmoz said:
The procedure in my last post is for getting the code after you flash the firmware!
Click to expand...
Click to collapse
Hello! I try do it, but I can't flash this firmware. I try few time and I saw only error. What Can I do? I relock my bootloader, and next lock again, but it didn't help.
schizyk12 said:
Hello! I try do it, but I can't flash this firmware. I try few time and I saw only error. What Can I do? I relock my bootloader, and next lock again, but it didn't help.
Click to expand...
Click to collapse
What was the error and when did you get it? Did it look like this:
Code:
sending 'zip' (71868 KB)...
OKAY [4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
If so, then this is expected. You just need to run the command again.
Code:
fastboot flash zip firmware.zip
If not, can you post the error so we can see it?
majmoz said:
What was the error and when did you get it? Did it look like this:
Code:
sending 'zip' (71868 KB)...
OKAY [4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
If so, then this is expected. You just need to run the command again.
Code:
fastboot flash zip firmware.zip
If not, can you post the error so we can see it?
Click to expand...
Click to collapse
Ok, no problem. I do anything and is the same situation. Look post down.
schizyk12 said:
I have a big prolem ;< all is okay, flash succesed. Green line 100%, reboot-bootloader
and I try boot into recovery, and screen is black, soo volume down+power, and I can't now boot into bootloader mode, device only boot again and try run, But I Have a custom rom, and device can't boot to firmware, soo I must run it in bootloader mode and Try install recovery.
Click to expand...
Click to collapse
Nevermind, but all of your instruction done, I boot into bootloader mode and flash twrp, again entering recovery, 2-3sec black screen, and again entering recovery every time..
schizyk12 said:
Nevermind, but all of your instruction done, I boot into bootloader mode and flash twrp, again entering recovery, 2-3sec black screen, and again entering recovery every time..
Click to expand...
Click to collapse
After the firmware update you have to unlock your bootloader before you can install TWRP. Follow this guide for unlocking your bootloader. It was in my earlier post. After you unlock the bootloader, reboot the phone into bootloader/FASTBOOT USB:
Code:
[B][I]fastboot devices[/I][/B]
** You should see your device listed.
Code:
[B][I]fastboot flash recovery <file-name>.img[/I][/B]
** Replace file name with the actual recovery name.
Code:
fastboot erase cache
fastboot reboot-bootloader
Alright, I recently purchased a phone that was stuck at the screen with the download icon in the arrow circle (http://forum.xda-developers.com/album.php?albumid=11886). When it is like this is can not be put into hboot. I then somehow got the phone into a boot loop. I did wipe the cache and that did not fix the problem. I did a factory reset via hboot, and it sent me back to the screen I mentioned before (http://forum.xda-developers.com/album.php?albumid=11886). I've now gotten the phone back into boot looping so I can access hboot. Recovery does work and you can access all the options. This phone is basically a stock HTC One M7. Has not been rooted, is locked, and it S-ON. Any help would be appreciated.
Thank you!
Flash a RUU
jdgreat4 said:
Flash a RUU
Click to expand...
Click to collapse
Could you link me to a tutorial? Apparently I need to know my MID and CID, and the video I did find to do that, needed usb debugging turned on in the settings which I don't even know if that is on. Can you link me to a how to tutorial for how to do this?
CloudHD said:
Could you link me to a tutorial? Apparently I need to know my MID and CID, and the video I did find to do that, needed usb debugging turned on in the settings which I don't even know if that is on. Can you link me to a how to tutorial for how to do this?
Click to expand...
Click to collapse
post the output of "fastboot getvar all", remove your imei and serialno before posting it
alray said:
post the output of "fastboot getvar all", remove your imei and serialno before posting it
Click to expand...
Click to collapse
Do I need a computer to do this? There's no option for this under fastboot in hboot. Currently don't have a computer available to me.
CloudHD said:
Do I need a computer to do this? There's no option for this under fastboot in hboot. Currently don't have a computer available to me.
Click to expand...
Click to collapse
Yes you need a computer with the latest android sdk installed and latest HTC drivers installed.
Btw, why did you buy this phone?
alray said:
Yes you need a computer with the latest android sdk installed and latest HTC drivers installed.
Btw, why did you buy this phone?
Click to expand...
Click to collapse
I bought it for a friend. He wanted something other than his locked up att samsung s4 active. He doesn't have much money and he figured he could fix this one and if he could't, he would just sell it again. I am personally used to iPhones (typing this on a jailbroken 4s right now) so this is all pretty new to me. We started troublesing it yesterday and he seemed to get stumped. He hates forums so I went ahead and signed up and made this post for him. Currently I have no access to a computer right now (at least one where I can install sdk and so on), but will have access later today. Will post when I have it.
CloudHD said:
I bought it for a friend. He wanted something other than his locked up att samsung s4 active. He doesn't have much money and he figured he could fix this one and if he could't, he would just sell it again. I am personally used to iPhones (typing this on a jailbroken 4s right now) so this is all pretty new to me. We started troublesing it yesterday and he seemed to get stumped. He hates forums so I went ahead and signed up and made this post for him. Currently I have no access to a computer right now (at least one where I can install sdk and so on), but will have access later today. Will post when I have it.
Click to expand...
Click to collapse
Latest HTC driver here: http://www.mediafire.com/download/8pawcxm9walwras/HTC_Driver_4.14.0.001.exe
You can install minimal adb and fastboot instead of the complete sdk, will be easier to use for you: http://forum.xda-developers.com/showthread.php?t=2317790
Once you have both installed, connect the phone to your computer, make sure its booted in bootloader mode --> fastboot mode and showing "fastboot usb" in red.
On your computer: Start menu --> Programs --> Minimal adb and fasboot --> minimal adb and fastboot
in the command prompt, type:
Code:
fastboot getvar all
copy and paste the output here (except the imei and s/n)
see you later
alray said:
Latest HTC driver here: http://www.mediafire.com/download/8pawcxm9walwras/HTC_Driver_4.14.0.001.exe
You can install minimal adb and fastboot instead of the complete sdk, will be easier to use for you: http://forum.xda-developers.com/showthread.php?t=2317790
Once you have both installed, connect the phone to your computer, make sure its booted in bootloader mode --> fastboot mode and showing "fastboot usb" in red.
On your computer: Start menu --> Programs --> Minimal adb and fasboot --> minimal adb and fastboot
in the command prompt, type:
Code:
fastboot getvar all
copy and paste the output here (except the imei and s/n)
see you later
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3921mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
CloudHD said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3921mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Ok well there is no RUU you can use with s-on so while the bootloader is locked all you can do is try to flash the current firmware. If the phone doesn't boot after that you will need to unlock the bootloader.
Download the firmware here https://www.androidfilehost.com/?fid=23501681358543602 put the zip in your fastboot folder on your pc and rename it "firmware.zip" Now with fastboot usb connected in the bootloader flash the firmware with the following fastboot commands
Code:
fastboot erase cache
fastboot oem rebootRUU
case sensitive
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Now try to reboot the phone. If it doesn't boot you should now at least be able to do a factory reset. But you will need to unlock the bootloader at www.htcdev.com register an account and follow the instructions in the Unlock My Bootloader section. :good:
Danny201281 said:
Ok well there is no RUU you can use with s-on so while the bootloader is locked all you can do is try to flash the current firmware. If the phone doesn't boot after that you will need to unlock the bootloader.
Download the firmware here https://www.androidfilehost.com/?fid=23501681358543602 put the zip in your fastboot folder on your pc and rename it "firmware.zip" Now with fastboot usb connected in the bootloader flash the firmware with the following fastboot commands
Code:
fastboot erase cache
fastboot oem rebootRUU
case sensitive
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Now try to reboot the phone. If it doesn't boot you should now at least be able to do a factory reset. But you will need to unlock the bootloader at www.htcdev.com register an account and follow the instructions in the Unlock My Bootloader section. :good:
Click to expand...
Click to collapse
Followed your instructions. Everything went good. I did a factory reset and the phone actually ended up rebooting. It's now just sitting here, and seems to be stuck at the htc logo. Going to go ahead and follow the steps to unlock my bootloader then report back.
@Danny201281 Boot loader is now unlocked!
CloudHD said:
@Danny201281 Boot loader is now unlocked!
Click to expand...
Click to collapse
Now the bootloader is unlocked you will need to flash a custom recovery and install a new Rom.
Download this http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img *<<<<< Put this in your fastboot folder and rename it recovery.img
Download this https://www.androidfilehost.com/?fid=23501681358545274
Boot the device to the bootloader and connect fastboot usb. Flash the recovery with fastboot
Code:
fastboot erase cache
fastboot flash recovery recovery.img
fastboot reboot-bootloader
When back in the bootloader select Recovery from the menu to load TWRP recovery. Before we do anything else a little spring cleaning. Select "Wipe" from the TWRP menu the "Format Data" You will be prompted to type yes to continue. When its done Select "Reboot" then "Reboot Recovery" You will see a message "No OS Installed" Reboot anyway and say No when asked to install supersu.
Now back in TWRP recovery you should be able to see the Internal Storage on your PC. Copy the rom file to the Internal Storage then from the TWRP menu select install and choose the rom .zip :good:
During the install with Aroma choose these options
Stock Radio = Yes
Stock Recovery = Yes
Root = No
When the install is completed reboot the device and hopefully it should boot up normally without any problems :good: :fingers-crossed:
P.S The first boot after a new flash can take an extended amount of time. Don't be supprised if it's stuck on the HTC logo screen for 15 minutes+ Just be patient
Danny201281 said:
Now the bootloader is unlocked you will need to flash a custom recovery and install a new Rom.
Download this http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img *<<<<< Put this in your fastboot folder and rename it recovery.img
Download this https://www.androidfilehost.com/?fid=23501681358545274
Boot the device to the bootloader and connect fastboot usb. Flash the recovery with fastboot
Code:
fastboot erase cache
fastboot flash recovery recovery.img
fastboot reboot-bootloader
When back in the bootloader select Recovery from the menu to load TWRP recovery. Before we do anything else a little spring cleaning. Select "Wipe" from the TWRP menu the "Format Data" You will be prompted to type yes to continue. When its done Select "Reboot" then "Reboot Recovery" You will see a message "No OS Installed" Reboot anyway and say No when asked to install supersu.
Now back in TWRP recovery you should be able to see the Internal Storage on your PC. Copy the rom file to the Internal Storage then from the TWRP menu select install and choose the rom .zip :good:
During the install with Aroma choose these options
Stock Radio = Yes
Stock Recovery = Yes
Root = No
When the install is completed reboot the device and hopefully it should boot up normally without any problems :good: :fingers-crossed:
P.S The first boot after a new flash can take an extended amount of time. Don't be supprised if it's stuck on the HTC logo screen for 15 minutes+ Just be patient
Click to expand...
Click to collapse
Thank you! My friend wanted to ask about soff and root for his device
CloudHD said:
Thank you! My friend wanted to ask about soff and root for his device
Click to expand...
Click to collapse
For s-off he will have to use Sunshine App it's the only working method for hboot 1.57. It does cost $25 but It's very easy. Just install and run the app :good:
Rooting can be done a number of ways the 2 easiest are to allow TWRP to install SupeSu when leaving recovery. Or you can install root with the Guru reset rom by selecting root during the installer. Also if he want's to keep the TWRP recovery don't take the stock recovery during the rom install.
Danny201281 said:
For s-off he will have to use Sunshine App it's the only working method for hboot 1.57. It does cost $25 but It's very easy. Just install and run the app :good:
Rooting can be done a number of ways the 2 easiest are to allow TWRP to install SupeSu when leaving recovery. Or you can install root with the Guru reset rom by selecting root during the installer. Also if he want's to keep the TWRP recovery don't take the stock recovery during the rom install.
Click to expand...
Click to collapse
alright. when formatting, I have been getting an unable to mount /cache and /system. should i be worries. Also, so when I do install the supesu? Can you give me some more detailed instructions like you have been doing? They're very helpful!!2220
CloudHD said:
alright. when formatting, I have been getting an unable to mount /cache and /system. should i be worries. Also, so when I do install the supesu? Can you give me some more detailed instructions like you have been doing? They're very helpful!!2220
Click to expand...
Click to collapse
Unable to mount /cache and /system happens during format or after? Did you reboot recovery after the format?
When you exit recovery TWRP will detect wheather or not the device is rooted. If it's not rooted TWRP will ask if you want to install supersu to root the phone. Say yes and TWRP will install root.
Although you could just install root when you install the rom. Just install with these options instead
Stock = Recovery No
Stock = Radio Yes
Root = Yes
Danny201281 said:
Unable to mount /cache and /system happens during format or after? Did you reboot recovery after the format?
When you exit recovery TWRP will detect wheather or not the device is rooted. If it's not rooted TWRP will ask if you want to install supersu to root the phone. Say yes and TWRP will install root.
Although you could just install root when you install the rom. Just install with these options instead
Stock = Recovery No
Stock = Radio Yes
Root = Yes
Click to expand...
Click to collapse
It seems to say this while it is updating partition details. Havent rebooted it as I wasn't sure about the cache and everything. So I guess before.
CloudHD said:
It seems to say this while it is updating partition details. Havent rebooted it as I wasn't sure about the cache and everything. So I guess before.
Click to expand...
Click to collapse
Reboot Recovery and then copy over and install the rom :good:
When you format data it is like repartitioning the phone. All the partitions are gone until you reboot. That's the reason they won't mount
Danny201281 said:
Reboot Recovery and then copy over and install the rom :good:
Click to expand...
Click to collapse
Alright, Thank you very much!!!
Will update how it all wetn when finished.
It happened when i was trying to flash a stock recovery img, so that i could update my htc one m7 with the official update from the phone "OTA_M7_UL_L50_SENSE60_MR_HTC_EUROPE_7.19.401.2-6.09.401.11_release_4217922wykl17vamtts1919.zip"
I cant do anything from the bootloader, beside i have my" Unlock_code" from past and can get that working allright, even that doesnt unlocks my phone anymore.
All though im able to use my phone, i want to update to the latest version.
So anyone out there in the big world, who can help me?
dukocuk said:
It happened when i was trying to flash a stock recovery img, so that i could update my htc one m7 with the official update from the phone "OTA_M7_UL_L50_SENSE60_MR_HTC_EUROPE_7.19.401.2-6.09.401.11_release_4217922wykl17vamtts1919.zip"
I cant do anything from the bootloader, beside i have my" Unlock_code" from past and can get that working allright, even that doesnt unlocks my phone anymore.
All though im able to use my phone, i want to update to the latest version.
So anyone out there in the big world, who can help me?
Click to expand...
Click to collapse
If you want to update your phone, why are you trying to unlock its bootloader? Do you have re-locked your bootloader with a custom recovery installed? Unlocking the bootloader will wipe /data/preload folder and preventing the ota update to install... I do not really understand what you are trying to do here because you are not giving much information about the actual state of your phone...
Is your phone running the stock rom?
You have relocked the bootloader with a custom recovery?
please post the output of "fastboot getvar all" (remove imei and serialno before posting)
alray said:
If you want to update your phone, why are you trying to unlock its bootloader? Do you have re-locked your bootloader with a custom recovery installed? Unlocking the bootloader will wipe /data/preload folder and preventing the ota update to install... I do not really understand what you are trying to do here because you are not giving much information about the actual state of your phone...
Is your phone running the stock rom?
You have relocked the bootloader with a custom recovery?
please post the output of "fastboot getvar all" (remove imei and serialno before posting)
Click to expand...
Click to collapse
i was trying to update it so i flashed a stockrecovery on it, else i wouldnt be able to update my phone with the OTA it gave me because i had a custom recovery on it before.
All i want is to update my phone with the stock rom, and then unlock it , so i can have a custom recovery again.
i messed it pretty good, so i have no recovery on it now i guess.
Its TAMPERED, RELOCKED and S-ON
my "fastboot getvar all" output is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3813mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.108s
dukocuk said:
i was trying to update it so i flashed a stockrecovery on it, else i wouldnt be able to update my phone with the OTA it gave me because i had a custom recovery on it before.
All i want is to update my phone with the stock rom, and then unlock it , so i can have a custom recovery again.
i messed it pretty good, so i have no recovery on it now i guess.
Its TAMPERED, RELOCKED and S-ON
my "fastboot getvar all" output is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3813mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.108s
Click to expand...
Click to collapse
What happens when you try to unlock the bootloader?
alray said:
What happens when you try to unlock the bootloader?
Click to expand...
Click to collapse
i can do flash unlock_code.bin, then it just deletes everything and im starting a fresh htc. In bootloader it then says tampered and relocked + s-on, it wont unlock it and even that it is locked, it wont update it to the newest official OTA update (7.19.401.2 / 804.78MB).
When it tries to enter recovery it isay: TAMPERED, RELOCKED and Security Warning , it just goes in the bootloader and not recovery.
dukocuk said:
i can do flash unlock_code.bin, then it just deletes everything and im starting a fresh htc. In bootloader it then says tampered and relocked + s-on, it wont unlock it and even that it is locked, it wont update it to the newest official OTA update (7.19.401.2 / 804.78MB).
When it tries to enter recovery it isay: TAMPERED, RELOCKED and Security Warning , it just goes in the bootloader and not recovery.
Click to expand...
Click to collapse
do you have a custom recovery installed ?
if so, the only way you can unlock the bootloader is to flash the stock firmware to put stock recovery back on, you cant lock or relock the bootloader with custom software on your phone.
Stock firmware here: https://www.androidfilehost.com/?fid=95832962473395871
i had custom recovery, but i flashed stockrecovery on it. Must have bricked the recovery somehow, because now i have no reecovery. If i try to flash the recovery i get this, no matter if i try to flash custom or stock recovery:
D:\adb>fastboot flash recover recovery_6.09.401.5.img
target reported max download size of 1514139648 bytes
sending 'recover' (12570 KB)...
OKAY [ 1.519s]
writing 'recover'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.767s
maybe because its locked, and i cant unlock it.
dukocuk said:
i had custom recovery, but i flashed stockrecovery on it. Must have bricked the recovery somehow, because now i have no reecovery. If i try to flash the recovery i get this, no matter if i try to flash custom or stock recovery:
D:\adb>fastboot flash recover recovery_6.09.401.5.img
target reported max download size of 1514139648 bytes
sending 'recover' (12570 KB)...
OKAY [ 1.519s]
writing 'recover'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.767s
maybe because its locked, and i cant unlock it.
Click to expand...
Click to collapse
yup, beacuse your bootloader is locked, only way to fix it is to flash the firmware, is there anything on the phone internal storage that you need to keep, pictures, musci, documents etc ?
Seanie280672 said:
yup, beacuse your bootloader is locked, only way to fix it is to flash the firmware, is there anything on the phone internal storage that you need to keep, pictures, musci, documents etc ?
Click to expand...
Click to collapse
the hel-l with my docs and stuff, how do you flash this .zip file? I cant reach my recovery, since its messed.
dukocuk said:
the hel-l with my docs and stuff, how do you flash this .zip file? I cant reach my recovery, since its messed.
Click to expand...
Click to collapse
with the phone in fastbootUSB mode and the zip in the same folder as adb and fastboot on your computer, issue these commands:
ps: its easier if you rename the download to just firmware rather than M7_UL_Firmware_6.09.401.11
fastboot oem rebootRUU (case sensetive) phone screen will go black with silver HTC logo
fastboot flash zip firmware.zip (first time it might say failed: please flush again) so issue the command again
fastboot flash zip firmware.zip
make sure it now says successful at the bottom - this is important
if so then,
fastboot reboot-bootloader
if not report back here first
when you get back to the bootloader, try and unlock it again, you may have to go back to HTCDev site and get a new unlock token.
Seanie280672 said:
with the phone in fastbootUSB mode and the zip in the same folder as adb and fastboot on your computer, issue these commands:
ps: its easier if you rename the download to just firmware rather than M7_UL_Firmware_6.09.401.11
fastboot oem rebootRUU (case sensetive) phone screen will go black with silver HTC logo
fastboot flash zip firmware.zip (first time it might say failed: please flush again) so issue the command again
fastboot flash zip firmware.zip
make sure it now says successful at the bottom - this is important
if so then,
fastboot reboot-bootloader
if not report back here first
when you get back to the bootloader, try and unlock it again, you may have to go back to HTCDev site and get a new unlock token.
Click to expand...
Click to collapse
im tampered and unlocked now after i did what you told, but i used my old Unlock.bin. Where do i go from here?
dukocuk said:
im tampered and unlocked now after i did what you told, but i used my old Unlock.bin. Where do i go from here?
Click to expand...
Click to collapse
ok follow these instructions I laid out for someone else if your looking to return to stock, they are exactly the same for your phone as your on the same firmware:
http://forum.xda-developers.com/showpost.php?p=59273464&postcount=4
ps. you dont need to lock or relock your bootloader to update, you only need locked or relocked whilst s-on to flash firmware or run an RUU.
Seanie280672 said:
ok follow these instructions I laid out for someone else if your looking to return to stock, they are exactly the same for your phone as your on the same firmware:
http://forum.xda-developers.com/showpost.php?p=59273464&postcount=4
ps. you dont need to lock or relock your bootloader to update, you only need locked or relocked whilst s-on to flash firmware or run an RUU.
Click to expand...
Click to collapse
so all you need is a stock recovery to update OTA? When do i use firmware and RUU? Sorry my noobish questions, did read the guides but didnt get the idea fully.
dukocuk said:
so all you need is a stock recovery to update OTA? When do i use firmware and RUU? Sorry my noobish questions.
Click to expand...
Click to collapse
use firmware for when you have problems like you did earlier or if your s-off, earlier RUU's are only if your phone is S-off and saves all this messing around, its full firmware and rom in one package, if you were s-off, then we could of just flashed the corrisponding firmware to an RUU, ran the RUU, you'd then be 100% factory stock, just boot and update from there.
theres a bit more to it than just stock recovery, your rom has to be 100% stock, no root, no custom kernals or anything like that, no removed stock apps.
trouble is, when you unlock the bootloader, it deletes a hidden folder (data/preload folder) its HTC's little way of say, now you've unlocked, you can never update with us again, that backup will put all of that back on your phone.
Seanie280672 said:
use firmware for when you have problems like you did earlier or if your s-off, earlier RUU's are only if your phone is S-off and saves all this messing around, its full firmware and rom in one package, if you were s-off, then we could of just flashed the corrisponding firmware to an RUU, ran the RUU, you'd then be 100% factory stock, just boot and update from there.
theres a bit more to it than just stock recovery, your rom has to be 100% stock, no root, no custom kernals or anything like that, no removed stock apps.
trouble is, when you unlock the bootloader, it deletes a hidden folder (data/preload folder) its HTC's little way of say, now you've unlocked, you can never update with us again, that backup will put all of that back on your phone.
Click to expand...
Click to collapse
So you gave me the firmware, its on the phone now.
I had Unlock.bin, but i can see it has supersu installed in it.
i flashed to stockrecovery from where you helped the other guy.
Im waiting for my download OTA update to finish (official).
Will i be able to update it even that i see its rootet (supersu)???
dukocuk said:
So you gave me the firmware, its on the phone now.
I had Unlock.bin, but i can see it has supersu installed in it.
i flashed to stockrecovery from where you helped the other guy.
Im waiting for my download OTA update to finish (official).
Will i be able to update it even that i see its rootet (supersu)???
Click to expand...
Click to collapse
try it, but I think you'll have to follow that whole post of mine that I linked you too, superSU modifies system files to root, so the OTA may error out.
if it does error, you'll have to start from here "what you need to do is flash TWRP 2.8.5.0 from here:" and follow every step, you wont need that firmware that you downloaded earlier again, just dont lock your bootloader.
Seanie280672 said:
try it, but I think you'll have to follow that whole post of mine that I linked you too, superSU modifies system files to root, so the OTA may error out.
if it does error, you'll have to start from here "what you need to do is flash TWRP 2.8.5.0 from here:" and follow every step, you wont need that firmware that you downloaded earlier again, just dont lock your bootloader.
Click to expand...
Click to collapse
you gave him https://www.androidfilehost.com/?fid=95832962473396067, what will it be on my phone? That other zip file you gave me? Is it that one i should install from recovery? If yes, why? Didnt i just installed it from RUU?
dukocuk said:
you gave him https://www.androidfilehost.com/?fid=95832962473396067, what will it be on my phone?
Click to expand...
Click to collapse
same files for your phone, have a look at the version main on your fastbootgetvar all on the first page 6.09.401.11 that download is the same version main, M7_UL_TWRP_Nandroid_6.09.401.11_(inkl._preload-Ordner).rar and this part means it contains the data/preload folder (inkl._preload-Ordner)
dukocuk said:
That other zip file you gave me? Is it that one i should install from recovery? If yes, why? Didnt i just installed it from RUU?
Click to expand...
Click to collapse
bin that firmware file, you wont need it again.
Seanie280672 said:
same files for your phone, have a look at the version main on your fastbootgetvar all on the first page 6.09.401.11 that download is the same version main, M7_UL_TWRP_Nandroid_6.09.401.11_(inkl._preload-Ordner).rar and this part means it contains the data/preload folder (inkl._preload-Ordner)
bin that firmware file, you wont need it again.
Click to expand...
Click to collapse
Thank, i followed the guide you made for that person, it helped me out too.
I appreciate it.
Hi everyone
Been on Cyanogenmod 11-20140424-NIGHTLY-M7 for far too long and wanted to either upgrade Cyanogenmod or, better yet, move to Viper. I'm somewhat skilled with Windows and Linux, but I can't seem getting things to work.
What I've got:
HTC One M7 (unbranded, bought in Switzerland)
Unlocked S-ON
hboot: 1.44.0000
M7-UL PVT SHIP S-ON RH
RADIO-4A.14.3250.13
OpenDSP-v26-120-274-0202
CID: HTC_102
It's rooted and got CWM ROM-Manager installed
Notebook with Windows 8.1, USB 3.0 all around
What I've tried so far:
Getting S-OFF
- Did not work. revone throws an ERROR=1 at me when I try to ./revone -P. I've tried like a hundred times, with su and all.
Then I tried to relock and get an RUU on it:
- Relocking did not work. Neither with revone (./revone -l or -r is successful on the CLI, but does nothing, i.e. still says *** UNLOCKED *** in the bootloader), nor with fastboot...
- ... as fastboot does not work, either. Tried different drivers and all, but fastboot always says < waiting for device >. So fastboot oem lock achieved nothing, either.
Then I just tried to install an RUU to get to JB and hboot 1.55 to then continue with rumrunner. This got stuck at some boot-image showing the HTC logo and the .exe cancelled.
Is USB3.0 breaking my neck here or do I have any other options to get to ViperOne?
Thanks in advance...
From what i've read in here many times, hboot 1.44 isn't compatiable with windows 8. 1. You need to use a windows 7 machine.
dorsetqpr said:
From what i've read in here many times, hboot 1.44 isn't compatiable with windows 8. 1. You need to use a windows 7 machine.
Click to expand...
Click to collapse
Correct
Hoelli169 said:
Hi everyone
Been on Cyanogenmod 11-20140424-NIGHTLY-M7 for far too long and wanted to either upgrade Cyanogenmod or, better yet, move to Viper. I'm somewhat skilled with Windows and Linux, but I can't seem getting things to work.
What I've got:
HTC One M7 (unbranded, bought in Switzerland)
Unlocked S-ON
hboot: 1.44.0000
M7-UL PVT SHIP S-ON RH
RADIO-4A.14.3250.13
OpenDSP-v26-120-274-0202
CID: HTC_102
It's rooted and got CWM ROM-Manager installed
Notebook with Windows 8.1, USB 3.0 all around
What I've tried so far:
Getting S-OFF
- Did not work. revone throws an ERROR=1 at me when I try to ./revone -P. I've tried like a hundred times, with su and all.
Then I tried to relock and get an RUU on it:
- Relocking did not work. Neither with revone (./revone -l or -r is successful on the CLI, but does nothing, i.e. still says *** UNLOCKED *** in the bootloader), nor with fastboot...
- ... as fastboot does not work, either. Tried different drivers and all, but fastboot always says < waiting for device >. So fastboot oem lock achieved nothing, either.
Then I just tried to install an RUU to get to JB and hboot 1.55 to then continue with rumrunner. This got stuck at some boot-image showing the HTC logo and the .exe cancelled.
Is USB3.0 breaking my neck here or do I have any other options to get to ViperOne?
Thanks in advance...
Click to expand...
Click to collapse
Windows 8 and hboot 1.44 are not compatible. You should use Windows 7 or better still Linux (preferably ubuntu 32bit)
Sent from my M7 ARHD 84-Kitkat
OK, got my hands on a Linux notebook and managed the relock the bootloader. This led to only being able to boot into Bootloader, Recovery and ROM did always boot into Bootloader.
Then I tried to get a RUU with JB4.3 on the device to be able to run rumrunner on hboot 1.55.
#sudo fastboot flash zip RUU.zip
sending 'zip' (1065710 KB)...
OKAY [ 59.411s}
writing 'zip' ...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 171.238s
Now I unlocked the bootloader again to at least be able to boot into CYM again.
Meh, I'm kinda lost here. I feel confused about RUUs, CIDs, Nandroid Backups and where to go from here.
Any ideas?
Edit:*Here's the fastboot-info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4128mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Edit2:*OK, I'm stuck in the CYM*launcher. Really kinda lost now D:
Hoelli169 said:
OK, got my hands on a Linux notebook and managed the relock the bootloader. This led to only being able to boot into Bootloader, Recovery and ROM did always boot into Bootloader.
Then I tried to get a RUU with JB4.3 on the device to be able to run rumrunner on hboot 1.55.
#sudo fastboot flash zip RUU.zip
sending 'zip' (1065710 KB)...
OKAY [ 59.411s}
writing 'zip' ...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 171.238s
Now I unlocked the bootloader again to at least be able to boot into CYM again.
Meh, I'm kinda lost here. I feel confused about RUUs, CIDs, Nandroid Backups and where to go from here.
Any ideas?
Edit:*Here's the fastboot-info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4128mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Edit2:*OK, I'm stuck in the CYM*launcher. Really kinda lost now D:
Click to expand...
Click to collapse
Download this recovery. http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.6.3.3-m7.img
Put the file in your fastboot folder.
Download this Rom. Put the zip in your fastboot folder and rename it rom.zip
http://www.htc1guru.com/dld/guru_reset_m7_1-29-401-13-zip/
Flash the recovery with fastboot
Code:
fastboot erase cache
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot reboot-bootloader
Select recovery from the bootloader menu. While in TWRP recovery. Push the Rom. Type
Code:
adb push rom.zip /sdcard
The command window will appear unresponsive until the push us complete. Do a full wipe and install the Rom. During the install setup choose these options.
Stock recovery = yes
Stock radio = yes
Root = No
You will now have full stock Rom and recovery. Reboot the device and go to settings>about>Software Updates. Download and install the OTA update. Repeat process untill your on JB 3.xx.401.x firmware. Then use rumrunner to gain s-off. :good:
Sent from my M7 ARHD 84-Kitkat
Danny201281 said:
Download this recovery.
Put the file in your fastboot folder.
Download this Rom. Put the zip in your fastboot folder and rename it rom.zip
Flash the recovery with fastboot
Code:
fastboot erase cache
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
Worked!
Select recovery from the bootloader menu. While in TWRP recovery. Push the Rom. Type
Code:
adb push rom.zip /sdcard
The command window will appear unresponsive until the push us complete. Do a full wipe and install the Rom. During the install setup choose these options.
Click to expand...
Click to collapse
This didn't work. While in TWRP, adb was not able to connect. Funnily enough, flashing TWRP*allowed me to boot into CYM again. Activated USB*Debugging and allowed the Host to connect, but still no luck in TWRP.
But since I*had access again I* just copied the Guru image over USB*to the Sdcard, booted back into TWRP*and installed the ROM*manually.
Stock recovery = yes
Stock radio = yes
Root = No
You will now have full stock Rom and recovery. Reboot the device and go to settings>about>Software Updates. Download and install the OTA update. Repeat process untill your on JB 3.xx.401.x firmware.
Click to expand...
Click to collapse
219486214 reboots later... JB*3.62.401.1, hooray!
Then use rumrunner to gain s-off. :good:
Click to expand...
Click to collapse
Another adventure... In the official instructions it says unlocked OR*rooted, so I*did not bother with rooting.
rumrunner then failed and damaged Recovery leading to not being able to boot into TWRP*and thus being unable to install SuperSu zip.
Had to reflash recovery, install SuperSu and run rumrunner again... Which again failed (becuase the screen was off, I did not see that ADB*Shell requested root).
After a couple of tries now it worked ^_^
Thanks a lot for your explanations.
Now I just have to find out how to get to Firmware 5.0.2 to install the latest ViperOne.
Edit:*When I try to run the OTA*update to 4.19.401.11 it just boots into Recovery
Hoelli169 said:
Worked!
This didn't work. While in TWRP, adb was not able to connect. Funnily enough, flashing TWRP*allowed me to boot into CYM again. Activated USB*Debugging and allowed the Host to connect, but still no luck in TWRP.
But since I*had access again I* just copied the Guru image over USB*to the Sdcard, booted back into TWRP*and installed the ROM*manually.
219486214 reboots later... JB*3.62.401.1, hooray!
Another adventure... In the official instructions it says unlocked OR*rooted, so I*did not bother with rooting.
rumrunner then failed and damaged Recovery leading to not being able to boot into TWRP*and thus being unable to install SuperSu zip.
Had to reflash recovery, install SuperSu and run rumrunner again... Which again failed (becuase the screen was off, I did not see that ADB*Shell requested root).
After a couple of tries now it worked ^_^
Thanks a lot for your explanations.
Now I just have to find out how to get to Firmware 5.0.2 to install the latest ViperOne.
Edit:*When I try to run the OTA*update to 4.19.401.11 it just boots into Recovery
Click to expand...
Click to collapse
You need stock rom and recovery to install OTA updates. You can just flash the rom again with stock recovery to take further OTAs.
But as your now s-off you can just flash the firmware manually. You don't need to re lock the bootloader again. That's only for s-on users.
You can download the rest of the firmware updates here https://www.androidfilehost.com/?w=files&flid=32777
You must flash at least one zip for each firmware version. I.e if your on 3.xx.401.x then you have to flash
4.xx.401.x
5.xx.401.x
6.xx.401.x
7.xx.401.x
Then you can flash twrp and install a lollipop rom. You should have the rom on the internal storage before you start as the device won't boot after flashing the firmware as it will replace the stock boot.img. So you will need to flash a rom before it will boot. :good:
Commands for flashing the firmware zip as follows.
Code:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip "name-of-firmware".zip
fastboot flash zip "name-of-firmware".zip
fastboot reboot-bootloader
Flash TWRP, Install Rom, Done :good:
Sent from my SM-T230 using Tapatalk
Danny201281 said:
You need stock tom and recovery to install OTA updates. You can just flash the rom again with stock recovery to take further OTAs.
But as your now s-off you can just flash the firmware manually. You don't need to re lock the bootloader again. That's only for s-on users.
You can download the rest of the firmware updates here
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
I thought I had to adhere to some upgrade path when handling firmwares but if that's not the case I'll be happy to use the latest, thanks!
Hoelli169 said:
I thought I had to adhere to some upgrade path when handling firmwares but if that's not the case I'll be happy to use the latest, thanks!
Click to expand...
Click to collapse
See my edited post above. You can't just flash the latest firmware. It might work but there's a risk of bricking your phone if you skip firmware versions
Sent from my SM-T230 using Tapatalk
Danny201281 said:
See my edited post above. You can't just flash the latest firmware. It might work but there's a risk of bricking your phone if you skip firmware versions
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
Ahh yes. Well, another interesting one going through the firmware updates. Going from 5.xx to 6.xx nearly killed my phone. Screen went black no matter how long I*pressed the power button and connecting through USB*mounted some strange folders on the device.
Luckily found Dexter's thread and his unbricking script solved the problem:
http://forum.xda-developers.com/showthread.php?t=2770684
Now ViperOne is updating, yay ^__^
Hoelli169 said:
Ahh yes. Well, another interesting one going through the firmware updates. Going from 5.xx to 6.xx nearly killed my phone. Screen went black no matter how long I*pressed the power button and connecting through USB*mounted some strange folders on the device.
Luckily found Dexter's thread and his unbricking script solved the problem:
http://forum.xda-developers.com/showthread.php?t=2770684
Now ViperOne is updating, yay ^__^
Click to expand...
Click to collapse
[emoji28] few!! Yeah firmware can be tricky. Glad you got it sorted though. Dexter's thread is a life saver. . Enjoy lollipop :good:
Sent from my SM-T230 using Tapatalk