[Q] HTC one M7 in qualcom download mode - One (M7) Q&A, Help & Troubleshooting

I did something silly and now my phone is in Qualcom dowoad mode.
I believe this is called a hard brick.
I believe I can flash firmware using the QPST tool ... does anybody have any images in hex that can be used in the tool?
Thanks
Carl.

No. You need JTAG ..

SaHiLzZ said:
No. You need JTAG ..
Click to expand...
Click to collapse
Do you know this for a FACT (experience) or are you speaking with read knowledge from the forum?
I don't mean to offend you BUT it has to be possible to rip the images required from the phone itself.

Qualcomm is used in lot of newer Samsung HTC and other devices. Look up any other device to find your answer.

SaHiLzZ said:
Qualcomm is used in lot of newer Samsung HTC and other devices. Look up any other device to find your answer.
Click to expand...
Click to collapse
I did look around the other forums, it seems to me that it can be done. It hasn't yet been done, that doesn't mean it can't.
I posted here to see if somebody had the images.

carlsanderson1986 said:
I believe I can flash firmware using the QPST tool ... does anybody have any images in hex that can be used in the tool?
Click to expand...
Click to collapse
Are you s-off? I don't think qpst will help if s-on, although I see an SB3.0 tab in latest qpst which may be of interest.
Here is latest QPST (2.7.402) I could find: http://forum.xda-developers.com/showthread.php?t=2020275
I would like to figure this out as well. I suspect it must be possible, since I don't think HTC would have planned to open the One for JTAG.
Here is some info on the xml formatting: http://forum.xda-developers.com/showthread.php?t=2208289
Still need to figure out which data/partitions to extract from healthy htc one to create mbn files (bin files).
Here is a thread with some qpst discussion related to htc one: http://forum.xda-developers.com/showthread.php?t=2467960

Research...
I've been researching... If there's a dev who already knows this stuff and can help out, would be much appreciated.
Here are my findings so far:
http://forum.xda-developers.com/showthread.php?t=1914359 <-- very interesting journey by dev, trying to unbrick galaxy note one with qpst
http://forum.xda-developers.com/showthread.php?t=2208289
http://forum.xda-developers.com/showthread.php?t=2136738
#Tool called MiFlash, taiwanese "brush" method for low level resetting devices
#uses qualcomm serial drivers/apis, looks similar to what qpst does
#the files provided for use with MiFlash can be used as examples for qpst
#perhaps the tool itself can be repurposed?
http://tw.miui.com/thread-3230-1-1.html <--translate with google
http://en.miui.com/thread-1885-1-1.html
http://en.miui.com/thread-1689-1-1.html
http://en.miui.com/download-111.html
http://xiaomi.eu/community/threads/guide-flashing-rom-using-miflash.19287/
#Random QPST usage information
http://www.anyclub.org/2012/05/how-to-generate-8660msimagembn.html
http://www.anyclub.org/2012/04/how-to-build-emmc-flash-programmer.html
http://blog.csdn.net/su_ky/article/details/7773273
https://github.com/jcsullins/qdloader/blob/master/qdload.pl

Been reading a few things about unbricking S3 and qualcomm based devices.. Some interesting read here: http://forum.xda-developers.com/showthread.php?t=2345860
HTC One Bootloader: http://forum.xda-developers.com/showthread.php?p=45402164#post45402164
HTC EVO Unbricking project: http://forum.xda-developers.com/showthread.php?t=1948485
These are just morsels of information I have collected but in theory: If you can get a working Hboot (or ENG Hboot?) on an sdcard and get the phone to read it your phone should boot back up. Assuming your device was S-OFF before any of this happened.
Let me know if any of this makes sense..

Related

Any one got the LS855_WD_1_0_7_0.dll?

I'm trying to flash my sprint marquee to virgin and I needed that file anyone got it? Thanks in advance if I find it before hand I'll post a link and change the thread title
abourdeau said:
You need that DLL for what program?
Click to expand...
Click to collapse
Lgnpst I actually got it to read though with the vs660.dll though. The dll that lg updater spits out is broken or can't be read by reggie.exe.
In case your wondering lg phones don't connect correctly unless you run the lgnpst program first. Then cdma workshop, dfs and other programs will work correctly. Honestly after going through the motions for awhile I think my best bet would be to erase the phones imei using smart flash then rewriting it using qxdm

Moto x pro(chinese nexus) hard bricked Please help!!

Dears
My phone have bricked and just is in qdloader 9008.the nexus 6 unbrick project does not work on it.
Phone model is MOTO X PRO XT1115
Also I find a working one of this phone.it is for my friend.is there any solution to backup from it and restore to this one in qdloader mode?Also I have its rom and all files just i don`t know how to use them.
p.m.6 said:
Dears
My phone have bricked and just is in qdloader 9008.the nexus 6 unbrick project does not work on it.
Phone model is MOTO X PRO XT1115
Also I find a working one of this phone.it is for my friend.is there any solution to backup from it and restore to this one in qdloader mode?Also I have its rom and all files just i don`t know how to use them.
Click to expand...
Click to collapse
Maybe there is some usefull info here for you http://forum.xda-developers.com/nexus-6/general/img-retcn-xt1115-motoxpro-lxg22-67-7-t3076881/page3. BTW why did you buy a Chinese device anyway?
I have checked all threads but did not help.I need many files to unbrick(programmer**.mbn and singleimage.bin or rawprogram0.xml patch0.xml)or any solution to how taking these files backup from another phone and restore bricked one.
p.m.6 said:
I have checked all threads but did not help.I need many files to unbrick(programmer**.mbn and singleimage.bin or rawprogram0.xml patch0.xml)or any solution to how taking these files backup from another phone and restore bricked one.
Click to expand...
Click to collapse
Don`t use Nexus 6 files (any variant) or you`ll brick your phone, i suggest looking on Chinese forums for more info/help.
I am here because I did not use them yet and trying to find a solution.
I am not chinese how can i search??
p.m.6 said:
I am here because I did not use them yet and trying to find a solution.
I am not chinese how can i search??
Click to expand...
Click to collapse
Use Google Translate and searching on baidu.com may get you more info.
Nothing found. just this that I can not understand it (m.blog.csdn.net/blog/ziyouwa/16331545) If someone have more information about this please help me.
p.m.6 said:
Nothing found. just this that I can not understand it (m.blog.csdn.net/blog/ziyouwa/16331545) If someone have more information about this please help me.
Click to expand...
Click to collapse
I think I can help. Can you take a screenshot of the device in Device Manager?
Thank you very much ,,Yes I can but not now,,,tommorow i will send the pic.it is qdloader 9008 in device manager.no bootloader no screen just qdloader 9008
Can you make a bootable USB Ubuntu stick? We can try flashing the partitions (I have them for the XT1115) there.
You could also hold off on that for a bit and I'll see if I can compile MotoFlasher for you.
yes I have already ubuntu bootable disc,will be greatfull if you could tell me what to do
@p.m.6 Can we use a different communication system? XDA is not the place for this type of walkthrough (I will post a complete one once we're done). I have sent you a PM.
That is ok my friend,waiting for your reply.(in private)
unbrick motorola moto x pro (xt1115)
p.m.6 said:
That is ok my friend,waiting for your reply.(in private)
Click to expand...
Click to collapse
i have the same problem, please any help would be appreciated

Android on Alcatel Idol 4S Windows edition

Hi everyone!
I was wondering if it's possible to flash android on the Alcatel Idol 4s Windows edition. The reason why i am asking is because i noticed that the TCL 950 (android smartphone) shares exactly the same SOC and specs with the Alcatel Idol 4s and it is actually made by the exact same company (TCL). It is basically the exact same phone, with a different brand on it and a different OS.
So i was wondering, would it be possible to flash the TCL 950 firmware on the Idol 4S windows in order to install Android on it? If yes, did any of you guys had the chance to find the firmware for the TCL 950? Cause i searched for it but didn't have any luck...
Thank you so much in advance!
I saw also that @compu829 commented a while back on the argument
steinwayer said:
Hi everyone!
I was wondering if it's possible to flash android on the Alcatel Idol 4s Windows edition. The reason why i am asking is because i noticed that the TCL 950 (android smartphone) shares exactly the same SOC and specs with the Alcatel Idol 4s and it is actually made by the exact same company (TCL). It is basically the exact same phone, with a different brand on it and a different OS.
So i was wondering, would it be possible to flash the TCL 950 firmware on the Idol 4S windows in order to install Android on it? If yes, did any of you guys had the chance to find the firmware for the TCL 950? Cause i searched for it but didn't have any luck...
Thank you so much in advance!
I saw also that @compu829 commented a while back on the argument
Click to expand...
Click to collapse
I still haven't found the firmware myself. As long as it was signed with the same certificate and windows phone, it should be possible.
compu829 said:
I still haven't found the firmware myself. As long as it was signed with the same certificate and windows phone, it should be possible.
Click to expand...
Click to collapse
After doing some heavy research i managed to find it!! Here it is, the TCL 950 firmware
http://pan.baidu.com/s/1geDBRnt
It is the official firmware directly from TCL i managed to talk with their assistance in China
@compu829 how can i flash this firmware now on my idol 4s??
Thank you so much in advance
@steinwayer I will need to download and extract it. I'll take a look later today.
Thanks @compu829
Did you find anything interesting ?
I'm interested in the possibilities here too. Thanks for your research and sharing it!
steinwayer said:
Thanks @compu829
Did you find anything interesting ?
Click to expand...
Click to collapse
I can't download it. Can you? If so can you put it somewhere like mega.co.nz?
I was able to download the package and re-upload it to mega with some help from my friends. Here is the link: https://mega.nz/#!ITJhjYIS!R_iUZhGZMcslAK_u1wdsJ-7q-0D5ma_KrHl4pu2CPqo
I took a quick look, and it is pretty much all mbn files that the factory would flash during assembly, so you will (most likely) need a copy of QPST. We may also be able to use WDRT to flash it. In either case, flashing will fail miserably if the certificates don't match.
So how would you suggest to do this @compu829?
steinwayer said:
So how would you suggest to do this @compu829?
Click to expand...
Click to collapse
compu829 said:
... In either case, flashing will fail miserably if the certificates don't match.
Click to expand...
Click to collapse
^^^ You probably won't be able to easily. At this point, no one here knows, but as @compu829 stated, if the certificates don't match (which they most likely don't), then you're not going to be flashing it at this point.
Would it not be possible to "force" the flashing of that image? Afer all the devices are exactly the same from an hardware perspective..
steinwayer said:
Would it not be possible to "force" the flashing of that image? Afer all the devices are exactly the same from an hardware perspective..
Click to expand...
Click to collapse
Same hardware != same implementation. There's mechanisms that will only allow certain things to be flashed, while all protections are still enabled on the device. Since it's a newer phone, I imagine qualcomm's security mechanisms are stepped up as opposed to how they are on older SoC implementations.
If anything, it will NOT be an easy feat to accomplish, so I will say no to a way of "forcing" it to flash at the moment.
It makes perfect sense
What i was thinking tho is that probably the two devices have even a different bootloader. Meaning that it would be a total wipe of the entire disk including swap partition and try to flash that rom.
I was thinking: imagine a bricked device, sometimes is possible to wipe out completely the memory on it and just flash the right rom. Sadly i do not habe much experience in mobile devices.. been developing only for desktops for years.
But if you guys manage to accomplish that it would be great.
The alcatel idol 4s is a great phone for both specs and design and is currently EXTREMELY cheap to. Buy on ebay (you can even find it at 100 bucks) mainly because of its OS
Being able to turn it into an Android phone would be an amazing feat
snickler said:
Same hardware != same implementation. There's mechanisms that will only allow certain things to be flashed, while all protections are still enabled on the device. Since it's a newer phone, I imagine qualcomm's security mechanisms are stepped up as opposed to how they are on older SoC implementations.
If anything, it will NOT be an easy feat to accomplish, so I will say no to a way of "forcing" it to flash at the moment.
Click to expand...
Click to collapse
Also, a very important factor is that the phones are made by the same shenzhen manufacturer most likely in the same plant. The only thingthey really change is the logo on the back, which comes later on, and the OS.from aanufacturing perspective it would not make much sense to lock with certificates the devices,slowing quite a bit he manufacturing process.it would have sense if the two devices were to be released in the same country, but in this case, tcl 950 is just available in asia, where idol 4s isnot. How can we verify this certificate thing @compu829 ? We have an Idol 4s
hello @snickler do you think that doing this: https://www.youtube.com/watch?v=Iwkx5CFRFKo
would give me a chance of success?
Also, in case of failure for differente certificates, do you think the process would not even start or would it start and brick my device?
Thanks
Update: I am trying to let QFIL to see my device.
First i put my device in flash mode by shutting it down and then immediately pressing and holding the volume up key. It goes in flash mode. I launch QFIL , connect the phone over the USB port, but the tool does not see my device.. i tried installing several qualcomm usb drivers, but till now no luck.
You guys have any suggestions??
@snickler @compu829 ?
Thanks in advance
It won't work. This is for phones stuck in QDLoader 9008 mode (DEAD MODE) and DLOAD mode. The Sahara protocol only accepts signed programmers that are stored in the UEFI. You also need the exact flashers for the particular phone for it to work as it's specific to the phone's bootloader (which is definitely signed)
snickler said:
It won't work. This is for phones stuck in QDLoader 9008 mode (DEAD MODE) and DLOAD mode. The Sahara protocol only accepts signed programmers that are stored in the UEFI. You also need the exact flashers for the particular phone for it to work as it's specific to the phone's bootloader (which is definitely signed)
Click to expand...
Click to collapse
Which method would you suggest me to try??
steinwayer said:
Update: I am trying to let QFIL to see my device.
First i put my device in flash mode by shutting it down and then immediately pressing and holding the volume up key. It goes in flash mode. I launch QFIL , connect the phone over the USB port, but the tool does not see my device.. i tried installing several qualcomm usb drivers, but till now no luck.
You guys have any suggestions??
@snickler @compu829 ?
Thanks in advance
Click to expand...
Click to collapse
I don't know what QFIL is, but vol up and power will put the windows phone in a flash mode that is compatible with WDRT. This mode is completely different than the Qualcomm mode. You most likely need to intentionally brick your device to enable Qualcomm recovery mode.
steinwayer said:
Which method would you suggest me to try??
Click to expand...
Click to collapse
No method. It's probably not best to randomly try things without understanding the underlying mechanisms and the implications of what could happen in the end.
Honestly, IMO, if you want Android then buy an Android phone. I understand that it would be cool to be able to swap out, but the likelihood of this happening right now is close to zero.
snickler said:
No method. It's probably not best to randomly try things without understanding the underlying mechanisms and the implications of what could happen in the end.
Honestly, IMO, if you want Android then buy an Android phone. I understand that it would be cool to be able to swap out, but the likelihood of this happening right now is close to zero.
Click to expand...
Click to collapse
If only i could put my hands on the software they use at tcl to flash their devices...
This is oje of the reasons why smartphones are still way behind computers. Not much freedom of choice and yet theorically it would be more than possible to allow a certain level of freedom on it

MDM error, tablet T713 stuck on bootloop.

Hello everyone,
I have my tablet SM-T713 which finds itself completely blocked following a dumpling on my part:
I had activated a software which prevented the installation of software etc on the tab and wanting to simply reset, I had the ingenious idea of ​​making a Wipe data and attempted an installation of a full firmware via Odin above .
Fatal error ! Unable to write on it (MDM) and I find myself in bootloop without the possibility of writing on it or anything.
I tried the TWRP flash without success, I cannot try in ADB or SD : refused.
Is there a tiny hope or can I use it freezbie?
Thank you really much by advance.
Jonathan
Hey,
i have a question: can i use a full nand erase on Odin ? Maybe it's the good solution to repair my tablet?
Thank you !
kurtspirit said:
Hey,
i have a question: can i use a full nand erase on Odin ? Maybe it's the good solution to repair my tablet?
Thank you !
Click to expand...
Click to collapse
Just read something about EDL I didn't know anything about before.
Perhaps this helps.
https://www.the***********.com/qualcomm-edl-mode-guide/
This adress seems censored so you have to replace the star by (custom) followed directly by (droid).
bmwdroid said:
Just read something about EDL I didn't know anything about before.
Perhaps this helps.
https://www.the***********.com/qualcomm-edl-mode-guide/
This adress seems censored so you have to replace the star by (custom) followed directly by (droid).
Click to expand...
Click to collapse
Hello,
really interesting ! I think that could be the way to recover my device but it still one big problem : find the QPST firmware :/
I check it on the web and i don't find it for T713 Samsung.
Maybe someone here know if it's possible to find it or have a way to "build" it ?
All help will be really aprreciated !
Best regards
kurtspirit said:
Hello,
really interesting ! I think that could be the way to recover my device but it still one big problem : find the QPST firmware :/
I check it on the web and i don't find it for T713 Samsung.
Maybe someone here know if it's possible to find it or have a way to "build" it ?
All help will be really aprreciated !
Best regards
Click to expand...
Click to collapse
Well I don't know how to build it (yet?) but as I'm interested to know as well, I've asked for how-to on that specific page.
Downloaded a stock T713 ROM and unpacked it.
It contains .mbn files but no .edf I can't identify all what the .mbn are for, if these would be sufficient or more/others are needed.
And of course don't know if the found ones could usefully be flashed with the QPST.
Hope the guy from that page will give positive answers.
bmwdroid said:
Just read something about EDL I didn't know anything about before.
Perhaps this helps.
https://www.the***********.com/qualcomm-edl-mode-guide/
This adress seems censored so you have to replace the star by (custom) followed directly by (droid).
Click to expand...
Click to collapse
bmwdroid said:
Well I don't know how to build it (yet?) but as I'm interested to know as well, I've asked for how-to on that specific page.
Downloaded a stock T713 ROM and unpacked it.
It contains .mbn files but no .edf I can't identify all what the .mbn are for, if these would be sufficient or more/others are needed.
And of course don't know if the found ones could usefully be flashed with the QPST.
Hope the guy from that page will give positive answers.
Click to expand...
Click to collapse
Ok thank you. I hope too. I'm stuck with this tablet . I have a riff box , i try to contact support and i have a good return but i need to find the jtag points on motherboard...
Thank you again for your help.
Have a good day.
Jonathan
kurtspirit said:
Ok thank you. I hope too. I'm stuck with this tablet . I have a riff box , i try to contact support and i have a good return but i need to find the jtag points on motherboard...
Thank you again for your help.
Have a good day.
Jonathan
Click to expand...
Click to collapse
The guy wrote an answer but not helpful at all:
<Hi. In case of Samsung devices, the only thing that will work is the Odin program. It’s hard to see a Samsung device getting hard bricked, just because Samsung has all those critical partitions blocked from being flashed. If you ever come across a soft-brick, you can just use Frija to download the latest Odin-flashable firmware and push it through Odin.>
So sorry.
bmwdroid said:
The guy wrote an answer but not helpful at all:
<Hi. In case of Samsung devices, the only thing that will work is the Odin program. It’s hard to see a Samsung device getting hard bricked, just because Samsung has all those critical partitions blocked from being flashed. If you ever come across a soft-brick, you can just use Frija to download the latest Odin-flashable firmware and push it through Odin.>
So sorry.
Click to expand...
Click to collapse
Hello,
bad news Anyway, thank you for your help , i really appreciate that you tried to find a solution for me.
I'll try to find a way to resolve this problem.
Thank you again and have a really good day
Jonathan
@kurtspirit hope that you'll manage to revive it.
Keep us updated.
Good luck.
kurtspirit said:
Hello everyone,
I have my tablet SM-T713 which finds itself completely blocked following a dumpling
.........
Is there a tiny hope or can I use it freezbie?
Thank you really much by advance.
Jonathan
Click to expand...
Click to collapse
lots of good info on "edl mode" and howto use it. If someone could give you a "dump"
you could write to your device. .
[GUIDE] How to dump and write back the storage on most of Qualcomm devices
This is a generic guide that could be suitable for many Qualcomm based devices, once the phone can be triggered to EDL mode. To make sure this guide will work as expect, following requirements are needed: - Know how to trigger the phone to EDL...
forum.xda-developers.com

Unlock ANY Pixel from Carrier

____________________________________________________
UPDATE AS OF 16 OF MAY 2023:
The security patch of December of 2022 fixed the patch, so it doesn't work on this version and newer ones.
The project is still alive and I am working to get the exploit to work on newer version, but for now haven't found any.
However due to the complex nature of the project and that I have little free time, expect this to take sometime until a new exploit is available.
If anyone has any ideas or suggestions please let me know! Any help is welcome
____________________________________________________
Hey everybody!
So recently I bought a Google Pixel 4 XL. The thing is that in Europe they are too expensive compared to the US, so I bought one that was from AT&T(used of course). However is that I need to use my SIM on the phone, but of course, the phone refused to allow me to use my SIM from Spain. ⛔️
So after hours of research, I found a way to unlock it. Here are the steps:
1. Remove your SIM card if it is on the phone
2. Do a factory reset
3. Do OFFLINE SETUP. Also, DON'T PUT ANY PASSWORD OR ANY TYPE OF SCREEN LOCK
4. Once you are on the main screen, enable USB Debugging.
5. Connect the phone to the computer (I assume you already have the USB drivers, platform-tools downloaded and knowledge on how to use ADB commands. If you don't have the SDK downloaded, head to this link and follow the instructions)
6. Inside the platform-tools folder, open a terminal window and run "adb shell"(on mac, once you are on the directory you have to run "./adb shell") and then "pm uninstall -k --user 0 com.google.android.apps.work.oobconfig" (run them without quotes)
After this, you can already connect the phone to the internet and put your SIM in.
This didn't unlock the phone though . What we have just done is this:
When we connect the phone to the internet, it verifies if it should lock the SIM or not. So we did a setup without internet, so the phone can't do that. After that, we uninstall the package responsible for doing this.
So when we connect it to the internet, it won't check the SIM lock
However, the bootloader is still locked and grey out. This is because this app is responsible to grey or not the bootloader switch. If it is from a carrier, the package will disable the switch, and if not you will have the ability to unlock it. As we kill the app before it could do its job, the bootloader will be waiting until the package gives its answer.
Special thanks to this Jorge Cortés to make this post possible.
If you find the post useful, consider buying me a cup of coffee please with Revolut.
If anyone has problems/doubts please let me know!
Esim is unlocked as well?
Didn't try but should work, as the phone never check if it is from a carrier or not.
#mcl said:
Didn't try but should work, as the phone never check if it is from a carrier or not.
Click to expand...
Click to collapse
On another post someaone said esim is working on pixel 4 verizon unlocked trought this steps. So as you say, it works.
Thanks
Danny17va said:
On another post someaone said esim is working on pixel 4 verizon unlocked trought this steps. So as you say, it works.
Thanks
Click to expand...
Click to collapse
No problem. Just for curiosity, who did the test on unlocked Verizon Pixel?
Is there any work around to unlock to bootloader too??
Daniyal48 said:
Is there any work around to unlock to bootloader too??
Click to expand...
Click to collapse
Hey,
I am working on that. As it turns out there is a way to flash firmware to any device with a Qualcomm chip, even if the bootloader os locked. It's called EDL mode. This mode was designed to force flash firmware in bricked devices that can't use fastboot or adb.
I already find the app I need to flash, actually there a a lot of different ones( I chose QPST) but it needs some strange files that I didn't find yet, and it won't allow em to use the google firmware neither .
So when I find those files I will write a detailed guide on how to unlock the bootloader , but for now I only know how to use any SIM on a locked Pixel device.
#mcl said:
Hey,
I am working on that. As it turns out there is a way to flash firmware to any device with a Qualcomm chip, even if the bootloader os locked. It's called EDL mode. This mode was designed to force flash firmware in bricked devices that can't use fastboot or adb.
I already find the app I need to flash, actually there a a lot of different ones( I chose QPST) but it needs some strange files that I didn't find yet, and it won't allow em to use the google firmware neither .
So when I find those files I will write a detailed guide on how to unlock the bootloader , but for now I only know how to use any SIM on a locked Pixel device.
Click to expand...
Click to collapse
I have tried the same on a OnePlus device but they have MSM Tool to thet let you work in edl mode but I haven't found any tool for Pixel devices yet
Daniyal48 said:
I have tried the same on a OnePlus device but they have MSM Tool to thet let you work in edl mode but I haven't found any tool for Pixel devices yet
Click to expand...
Click to collapse
yeah unlike Oneplus Google didn't release any software designed specifically to the Pixel lineup, so you have to use the generic Qualcomm tools.
#mcl said:
yeah unlike Oneplus Google didn't release any software designed specifically to the Pixel lineup, so you have to use the generic Qualcomm tools.
Click to expand...
Click to collapse
Can you name other generic Qualcomm tools so I can experiment with them??
Yeah of course, there is QFIL also and some others that aren't official. I downloaded them from Androidmtk website.
With this link you go to the qpst download and use instructions section of their webpage. At the bottom you will find similar programs, but I didn't get to try them. You can try them, but make sure they are for Qualcomm Chipset, because some of them are for mediatek phones.
#mcl said:
Yeah of course, there is QFIL also and some others that aren't official. I downloaded them from Androidmtk website.
With this link you go to the qpst download and use instructions section of their webpage. At the bottom you will find similar programs, but I didn't get to try them. You can try them, but make sure they are for Qualcomm Chipset, because some of them are for mediatek phones.
Click to expand...
Click to collapse
Okay thank you I hope i find a solution with this
Daniyal48 said:
Okay thank you I hope i find a solution with this
Click to expand...
Click to collapse
No problem, good luck researching .
I will keep searching as well to see if I can find those files
#mcl said:
No problem, good luck researching .
I will keep searching as well to see if I can find those files
Click to expand...
Click to collapse
If you find any files please also send them to me. Can we use a working Device to get these files from. Like we extract these files for a normal pixel 4 xl and then flash it to ours?
Daniyal48 said:
If you find any files please also send them to me. Can we use a working Device to get these files from. Like we extract these files for a normal pixel 4 xl and then flash it to ours?
Click to expand...
Click to collapse
Of course, if I find them I will make them available for anyone .
Yes in theory you can extract this files from your phon, however as mine is locked I need them from an unlocked pixel I suppose, but I didn't try to extract the files from my home and the flash them again, it could work. In the QPST you even have a section to that, it's a backup I Believe but not sure about the name.
If you try and it works let me know!
#mcl said:
Of course, if I find them I will make them available for anyone .
Yes in theory you can extract this files from your phon, however as mine is locked I need them from an unlocked pixel I suppose, but I didn't try to extract the files from my home and the flash them again, it could work. In the QPST you even have a section to that, it's a backup I Believe but not sure about the name.
If you try and it works let me know!
Click to expand...
Click to collapse
Yes I am also looking for an unlock Pixel 4 XL if I find one I will try extracting these files and post it somewhere on the internet so anyone can access it
Yeah that is a way, but I was thinking that maybe these files are inside of the IMG files of the firmware from Google, and that firmware isn't lock , so if anyone manage to find those files there you wouldn't need to buy another pixel to extract the firmware.
I also think that in reality you don't need the firmware but rather some files for your Qualcomm Chipset to get the Sahara protocol working and I believe later on you flash the firmware, however I am not sure about that as I didn't try it.
I think this because you can find some Qualcomm snapdragon 855 programmer files (which had the extension we need), so they may be basic files that activates the Sahara protocol (which is the one used when the phone is in this mode) and only after I believe you can flash the firmware using some commands.
I would like to try out this but I can't as it could brick my phone and I don't have other to use, and I don't have any other pixel, this is my first and only Pixel ever.
So if you have an older pixel and you want you could try this theory...
#mcl said:
Yeah that is a way, but I was thinking that maybe these files are inside of the IMG files of the firmware from Google, and that firmware isn't lock , so if anyone manage to find those files there you wouldn't need to buy another pixel to extract the firmware.
I also think that in reality you don't need the firmware but rather some files for your Qualcomm Chipset to get the Sahara protocol working and I believe later on you flash the firmware, however I am not sure about that as I didn't try it.
I think this because you can find some Qualcomm snapdragon 855 programmer files (which had the extension we need), so they may be basic files that activates the Sahara protocol (which is the one used when the phone is in this mode) and only after I believe you can flash the firmware using some commands.
I would like to try out this but I can't as it could brick my phone and I don't have other to use, and I don't have any other pixel, this is my first and only Pixel ever.
So if you have an older pixel and you want you could try this theory...
Click to expand...
Click to collapse
I have Pixel 2 XL but it doesn't boot into EDL i tried fastboot commands and also abd commands but it doesn't even go there...I have Pixel 3 XL on the way I will try on that but that is already unlocked
#mcl said:
Yeah that is a way, but I was thinking that maybe these files are inside of the IMG files of the firmware from Google, and that firmware isn't lock , so if anyone manage to find those files there you wouldn't need to buy another pixel to extract the firmware.
I also think that in reality you don't need the firmware but rather some files for your Qualcomm Chipset to get the Sahara protocol working and I believe later on you flash the firmware, however I am not sure about that as I didn't try it.
I think this because you can find some Qualcomm snapdragon 855 programmer files (which had the extension we need), so they may be basic files that activates the Sahara protocol (which is the one used when the phone is in this mode) and only after I believe you can flash the firmware using some commands.
I would like to try out this but I can't as it could brick my phone and I don't have other to use, and I don't have any other pixel, this is my first and only Pixel ever.
So if you have an older pixel and you want you could try this theory...
Click to expand...
Click to collapse
Mbn Files from Pixel 4 Request
As title states, I am looking for the mbn files from the pixel 4. I downloaded the modem partition and could not seem to extract it and thought someone that owns a pixel 4 might have better luck than me. Thanks! The directory might be...
forum.xda-developers.com
Are these files related to our issue

Categories

Resources