Database Develop

Looking for some advice please

Hello,
My wife has somehow managed to get her galaxy mini stuck in a boot loop. USB debug was not enabled before this happened and I cannot see the phone with adb. I can get to download mode, does anyone have any suggestions on how to go from here?

Frazer Scott said:
Hello,
My wife has somehow managed to get her galaxy mini stuck in a boot loop. USB debug was not enabled before this happened and I cannot see the phone with adb. I can get to download mode, does anyone have any suggestions on how to go from here?
Click to expand...
Click to collapse
what is the current rom? try wipe data/factory reset in recovery.. but user apps will be gone and settings will be back to default..

Frazer Scott said:
Hello,
My wife has somehow managed to get her galaxy mini stuck in a boot loop. USB debug was not enabled before this happened and I cannot see the phone with adb. I can get to download mode, does anyone have any suggestions on how to go from here?
Click to expand...
Click to collapse
Install kies in ur pc
Install odin for mini
Dwnload tass.ops
Check for working usb cable and port
Dwnld any stock firmware from samfirmwares.com
Extract its contents and place it anywhere in pc
Keep ur phone in download mode...power+centre+down buttons when phone is off
Connect to pc while running odin
If odin detects your device ( to check this, observe a yellow bar in COM1 AFTER connectin phone)
Click one package, select ops, select tar.md5(stock firmware)
Push start
Have some water take a potty break
When a blue colour in COM1 is shown with pass in it...THEN ONLY DISSCONNECT THE PHONE
THE ABOVE STEP IS VVVVERY IMPORTANT
Use ur phone like before
Happy flashing and good luck

A nice quick clean guide...I will put it in my blog with links..thanx mate

Download The S5570BUKB1_4 From Here:-http://hotfile.com/dl/112744353/ac8c83b/S5570BUKB1.rar.html
I Was Also Stucked In BOOTLoops But I was Accesing The Download MOde..
This Is The Stock FROYO Firmware....
Try THis Before Using GB...
FlasH It Via Odin
Tutorial(ViDeo):-
http://www.youtube.com/watch?v=7mv5d1q4Bfo
Click to expand...
Click to collapse
This Will Work 100%....
Press The ThanKs Button if i helped u

Ph3rOn!xX said:
Download The S5570BUKB1_4 From Here:-http://hotfile.com/dl/112744353/ac8c83b/S5570BUKB1.rar.html
I Was Also Stucked In BOOTLoops But I was Accesing The Download MOde..
This Is The Stock FROYO Firmware....
Try THis Before Using GB...
FlasH It Via Odin
Tutorial(ViDeo):- http://www.youtube.com/watch?v=7mv5d1q4Bfo
This Will Work 100%....
Press The ThanKs Button if i helped u
Click to expand...
Click to collapse
There's absolutely no need to flash froyo before gingerbread. U can directly flash gb...

freakyfriday said:
There's absolutely no need to flash froyo before gingerbread. U can directly flash gb...
Click to expand...
Click to collapse
No.. U HAve 2 ..I Also Had Flashed GB via Odin 10-15 Times But It Didnt Work For Me ...
Thn Aftrwrds I Flashed The Stock Froyo ... Which Worked For Me ..

Ph3rOn!xX said:
No.. U HAve 2 ..I Also Had Flashed GB via Odin 10-15 Times But It Didnt Work For Me ...
Thn Aftrwrds I Flashed The Stock Froyo ... Which Worked For Me ..
Click to expand...
Click to collapse
You are just unlucky

KoperKiller said:
You are just unlucky
Click to expand...
Click to collapse
Lolololol
Sent from my GT-S5570 using xda premium

ph3ron!xx said:
no.. U have 2 ..i also had flashed gb via odin 10-15 times but it didnt work for me ...
Thn aftrwrds i flashed the stock froyo ... Which worked for me ..
Click to expand...
Click to collapse
roflmfao! !! :d

Dont laugh ... plzz... Try i & thn Laugh.. as i did
When i was in such prob i had given my phone to the service centre & even dat dum guy coulnt fix it out... Yagya Gaire helped me abt this thing & it worked
Sent from my GT-S5570 using XDA

Thanks for the replies. I will try odin, im wondering if odin will work if I cannot see the phone with adb? It is currently stock everything as it was out of the box. The first thing I did was the factory reset but it diddnt help.

Ph3rOn!xX said:
No.. U HAve 2 ..I Also Had Flashed GB via Odin 10-15 Times But It Didnt Work For Me ...
Thn Aftrwrds I Flashed The Stock Froyo ... Which Worked For Me ..
Click to expand...
Click to collapse
If ur from any cm7 or cm9 then this is useful.
first flash GB using odins u see the samsung logo boot looping now close the odins ,remove the battery,reinsert it and now enter into recovery and wipe data and cache. (I do the same thing when I flash gb from cm9)

It seems odin is windows only? Does anyone know of a good tool for Linux?

Frazer Scott said:
It seems odin is windows only? Does anyone know of a good tool for Linux?
Click to expand...
Click to collapse
Open windows in virtual box.

Frazer Scott said:
It seems odin is windows only? Does anyone know of a good tool for Linux?
Click to expand...
Click to collapse
For Linux you have Heimdall.

Mr. Baugis, i have a problem D:

Hi to everyone.:
I'm from Chile and i have an SAMSUNG GALAXY ACE, model M.
The last night, i install the GREAT Kernel of Mr.Baugis, but i have a BIG PROBLEM.!
I don't now my brother did, but I think it went to recovery mode and made some adjustments(tried to install an android, I think) and restart the phone.I turn on, says the phone model and not pass the screen "Rafael.Baugis Kernel" I have waited up to 10 minutes to do something but nothing.
Really, i need help. I love this cellphone and i need it to work
PS: if the issue is not going here, Move it please
PS2: Sorry for the bad english

Did you try clear data/factory reset and clear the dalvik cache? If you did and still end up in a bootloop, flash a new rom. If that did not work too, flash the default stock firmware through Odin. Hope it helped
This is sent from the moon using a 100gbps connection

Thnaks, but it doesn't work
my pc don't recognize ODIN, but i have all the controlators and the KIES of samsung
CsmDarren said:
Did you try clear data/factory reset and clear the dalvik cache? If you did and still end up in a bootloop, flash a new rom. If that did not work too, flash the default stock firmware through Odin. Hope it helped
This is sent from the moon using a 100gbps connection
Click to expand...
Click to collapse

lalobad said:
Thnaks, but it doesn't work
my pc don't recognize ODIN, but i have all the controlators and the KIES of samsung
Click to expand...
Click to collapse
If you are able to get your phone in download mode (volume up + volume down + power) then simply follow any guide from this section explaining how to flash multipackage stock firmware. If ur phone is not getting detected in odin, that is also explained in multiple threads here. As long as u can get the phone in download mode, you should be able to fix the problem. Let me know if u still need exact directions
Sent from my GT-S5660 using xda app-developers app

I had the same problem like you have.
At first you must uninstall Samsung Kies and install these http://www.mediafire.com/?n412p5v6golq4sn official USB-Driver from Samsung.
Start Odin 1.85 and Run it as Admin if you have Win7. Connect your Ace and check if your device get displayed in Odin.
Then go into the download mode and flash your firmware.
If you can't get into the Download Mode you must buy a USB-Jig from Amazon or wherever.

thanks
JB|Fabo said:
I had the same problem like you have.
At first you must uninstall Samsung Kies and install these[EDITED LINK]official USB-Driver from Samsung.
Start Odin 1.85 and Run it as Admin if you have Win7. Connect your Ace and check if your device get displayed in Odin.
Then go into the download mode and flash your firmware.
If you can't get into the Download Mode you must buy a USB-Jig from Amazon or wherever.
Click to expand...
Click to collapse
saeed14i said:
If you are able to get your phone in download mode (volume up + volume down + power) then simply follow any guide from this section explaining how to flash multipackage stock firmware. If ur phone is not getting detected in odin, that is also explained in multiple threads here. As long as u can get the phone in download mode, you should be able to fix the problem. Let me know if u still need exact directions
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Thanks guys, but i can resolve my problem:
i go to the support of my cellphone company (entel pcs chile) and they give me another galaxy ace TOTALLY NEW AND FREE
i'm so luck!
Thanks 4 the answers :victory::victory::victory::laugh::laugh:

lalobad said:
Thanks guys, but i can resolve my problem:
i go to the support of my cellphone company (entel pcs chile) and they give me another galaxy ace TOTALLY NEW AND FREE
i'm so luck!
Thanks 4 the answers :victory::victory::victory::laugh::laugh:
Click to expand...
Click to collapse
Congratulations
I am surprised, a company replacing a phone after it is rooted and flashed with a custom kernel
Amazing
You are truly very lucky

[Q] Captivate soft bricked.

I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:

Avikar said:
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Click to expand...
Click to collapse
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig

n205des said:
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
Click to expand...
Click to collapse
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?

Avikar said:
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Click to expand...
Click to collapse
download this
http://www.mediafire.com/?sbjd049x4m36pb6
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...

Dude why the hell "junior" written under ur name, U RECOVERED MY PHONE.
n205des said:
download this
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Click to expand...
Click to collapse
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five

Avikar said:
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Click to expand...
Click to collapse
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel

but how to boot into cwm??
n205des said:
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
Click to expand...
Click to collapse
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?

Avikar,
This Stickied thread will prove helpful.... Captivate - PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SAMSUNG-SGH-I747 using xda premium

Avikar said:
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Click to expand...
Click to collapse
volume+ volume- and power button is the combo for recovery..

Still not there.
n205des said:
volume+ volume- and power button is the combo for recovery..
Click to expand...
Click to collapse
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???

^
The KK4 Corn Kernel will only boot up and run if u r on KK4 firmware or a Rom of that base...or previous stock firmware/roms.
Sent from my SGH-I777 using xda premium

Avikar said:
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
Click to expand...
Click to collapse
it does not boot in recovery,right?
have you tried through rom manager??

^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium

4-2ndtwin said:
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
but it can help by booting into recovery without the three button combo.

Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium

Still nothing.
4-2ndtwin said:
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2

Avikar said:
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Click to expand...
Click to collapse
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843

Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app

Avikar said:
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
try anything which you like

n205des said:
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Click to expand...
Click to collapse
As i mentioned stock rom 2.1 eclair from the same forum Bricks my phone,
Didnt try 2.2,
recently on the 2.3 from the same forum but no help...Instead of boot logo some white backgound with million colour dots appear and I can not
enter to recovery or download mode i have tried every thing,,,

Boot loop - neither recovery nor download mode possible

Hi,
got a bit of an emergency here. Maybe someone got a useful hint for me?
I've been running X-Power 3.0 ROM with Perseus kernel 32.1 so far and just finished undervolting the kernel via SetCPU - ROM booted up fine afterwards.
But today I decided to give Perseus 33 a try, and after flashing the TAR with ODIN mobile my phone won't boot again - it shows the "Galaxy S III" screen, blanks the screen again and then restarts again - I can't get the phone into recovery or download mode
Any hints on how to solve this one?

try pulling the battery out and trying to get into download again. I'd that doesn't work, you have to get a usb jig, that has a small chance of working.

Glebun said:
try pulling the battery out and trying to get into download again. I'd that doesn't work, you have to get a usb jig, that has a small chance of working.
Click to expand...
Click to collapse
Thanks for helping. I somehow got into recovery in between, but I can't tell why - AFAIK I did it all the same way times and again before, but now I was able to restore a CWM backup :good:

Try using TWRP recovery:
http://goo.im/devs/OpenRecovery
Find you Model number...
I find its easiest.
Sent from my GT-I9305 using xda app-developers app

Pheoxy said:
Try using TWRP recovery:
http://goo.im/devs/OpenRecovery
Find you Model number...
I find its easiest.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
wouldn't have made a difference

Glebun said:
wouldn't have made a difference
Click to expand...
Click to collapse
I wasn't meaning the Bootloop, just the Recovery itself once it was fixed.

Saksham.Ar
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!

saksham.2991 said:
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
Click to expand...
Click to collapse
One try a USB Recovery Jig
Two take to a service centre .
jje

saksham.2991 said:
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
Click to expand...
Click to collapse
read the thread before posting

5 steps
JJEgan said:
One try a USB Recovery Jig
Two take to a service centre .
jje
Click to expand...
Click to collapse
Hello,
I had the same problem with another device. What me helped was:
1. Using a USB-Jig - then Downloadmode went on on its own
2. Flasing CWM- Recovery (with Odin)
3. AFTER THAT put out Battery for some seconds (10s)
4. CWM- was accessible
5. deleting cache and dalvik, (and did a factory reset but think that wasn't the point),
and bootloop wad gone.
Hope that helped,
Quantenkosmos.

Thank you this thread is how many months old .

Stuck on Download Mode

Hello ,
I have Korean version N950N. I flashed twrp and then i rooted to phone. Today i decided to flash stock rom with Odin. When i started the flash approx %80 odin was stop and i wait more than 1 hour then i pulled out the cable. Now phone give some error (its Korean language ) and i can access to download mode. I tried with 2 different rom but after %80 odin stop again. Now i can not use my phone even i can not turn off always giving error. How can i solve this problem? Please help me. Thank you.

bahadir70 said:
Hello ,
I have Korean version N950N. I flashed twrp and then i rooted to phone. Today i decided to flash stock rom with Odin. When i started the flash approx %80 odin was stop and i wait more than 1 hour then i pulled out the cable. Now phone give some error (its Korean language ) and i can access to download mode. I tried with 2 different rom but after %80 odin stop again. Now i can not use my phone even i can not turn off always giving error. How can i solve this problem? Please help me. Thank you.
Click to expand...
Click to collapse
Have you tried the smart switch emergency recovery option?

BluePhnx said:
Have you tried the smart switch emergency recovery option?
Click to expand...
Click to collapse
When i connected to smart switch its also said this phone not supported...

Can you go in to recovery mode and factory reset?

bahadir70 said:
When i connected to smart switch its also said this phone not supported...
Click to expand...
Click to collapse
Can you flash TWRP and get into recovery to wipe system or flash a custom Rom?

BluePhnx said:
Have you tried the smart switch emergency recovery option?
Click to expand...
Click to collapse
android-incredible said:
Can you go in to recovery mode and factory reset?
Click to expand...
Click to collapse
I can not most probably , also now battery is off and i forget my cable at office Tomorrow i will try one more time. But o with phone i can access only download mode, with smart switch giving error as well.

Well ,i solved the problem. I downloaded last version of stock rom and i changed odin as well. Now phone is working. For the S-health i downloaded old version and after that i updated with play store then S-health working properly.

bahadir70 said:
Well ,i solved the problem. I downloaded last version of stock rom and i changed odin as well. Now phone is working. For the S-health i downloaded old version and after that i updated with play store then S-health working properly.
Click to expand...
Click to collapse
Good to hear . Now leave it alone
Sent from my SM-N950U using Tapatalk

android-incredible said:
Can you go in to recovery mode and factory reset?
Click to expand...
Click to collapse
I Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
My model number is SM-950F , basically stuck on download mode
No luck turning the phone on recovery mode only can use download mode and i have tried the same files with the Nand erase all, the same thing .. Odin installs all the files without any errors but does not boot up after installation is finished.
The service shop said they checked components on the motherboard and there is no damage or no IC has been damaged.
What do you suggest i do next?