Database Develop

Stock Nordic 4.4.2 10.5.A.0.230 Aroma for CWM + kernel

4.4.2 10.5.A.0.230 Firmware for 5503
Stripped FTF: http://yadi.sk/d/5qAMp8rZRVPe5
Full FTF: http://yadi.sk/d/fokZoJV0RQtoC
Deodexed ZIP AROMA for CWM(Recomendet): http://yadi.sk/d/XCuwQ19_SDG3W
Odexed ZIP AROMA for CWM(not use dalvik/bionic fix): http://yadi.sk/d/V6LdR1OfRVPey
Stock kernel with recovery: http://yadi.sk/d/jHKTMB-WSUGsF - use flashtool or fastboot to flash(for unlocked bootloaderonly)
How to Install firmware:
Download stripped ftf and push to firmwares folder in flashtool.
Download deodexed zip and push to SDCard.
Reboot phone to cwm, make full wipe(recomendet) or dalvik wipe.
Install firmware zip from sdcard.
Disconnect phone from pc(if connected) and shutdown it.
Run flashtool, select stripped firmware and flash it(connect phone when needed).
Use it!
Use Force GPU Rendering in developer options if Settings is laggy.
ROM has root,busybox,dual recovery preinstalled.
Tweaks in Aroma:
"SDCard Access Fix" - allow app to use sdcard normally
"Droid Boot Animation" -droid boot animation))
"Bionic patch" - QC optimized libraries from nexus
"Dalvik patch" - QC optimized libraries from nexus
"HQ Video Recording" - 20 mbps bitrate and better videorecording quality
"Fix Audio in VideoRec" - fix for audio in video recording
"AutoRun(init.d) support" - init.d support))
Fast dormancy settings only for RU users.
News: added settings from .233 firmware for odexed(not tested) and deodexed(tested - working) ROMs(hw acceleration enabled in apk, not needed enabling 2d rendering in developer options)

does the input settings works in deodexed?
thanks a lot

sijav said:
does the input settings works in deodexed?
thanks a lot
Click to expand...
Click to collapse
All working fine :good:

xenius9 said:
All working fine :good:
Click to expand...
Click to collapse
Nice, then I redirect my thread to this one :thumbup:

Is this based on the C5503 KitKat version?

Actually I am using the dalvic and bionic patches on Odex and it works well
I just want to ask why deodex ?The Lib and Bin folders don't get deodexed only framework and system app
so what is the point of deodex with the libaries ?

How did you fix the Audio bitrate and video recording at 20Mb/S
The only guide i know is this one and it isn't complete for the ZR some values can't be found
http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=25906110

Unlocked Bootloder
sijav said:
does the input settings works in deodexed?
thanks a lot
Click to expand...
Click to collapse
Can I Flash it on unlocked Bootloder???

xenius9 said:
4.4.2 10.5.A.0.230 Firmware for 5503
Stripped FTF: http://yadi.sk/d/5qAMp8rZRVPe5
Full FTF: http://yadi.sk/d/fokZoJV0RQtoC
Deodexed ZIP AROMA for CWM(Recomendet): http://yadi.sk/d/XCuwQ19_SDG3W
Odexed ZIP AROMA for CWM(not use dalvik/bionic fix): http://yadi.sk/d/V6LdR1OfRVPey
Stock kernel with recovery: http://yadi.sk/d/jHKTMB-WSUGsF - use flashtool or fastboot to flash(for unlocked bootloaderonly)
How to Install firmware:
Download stripped ftf and push to firmwares folder in flashtool.
Download deodexed zip and push to SDCard.
Reboot phone to cwm, make full wipe(recomendet) or dalvik wipe.
Install firmware zip from sdcard.
Disconnect phone from pc(if connected) and shutdown it.
Run flashtool, select stripped firmware and flash it(connect phone when needed).
Use it!
Use Force GPU Rendering in developer options if Settings is laggy.
ROM has root,busybox,dual recovery preinstalled.
Tweaks in Aroma:
"SDCard Access Fix" - allow app to use sdcard normally
"Droid Boot Animation" -droid boot animation))
"Bionic patch" - QC optimized libraries from nexus
"Dalvik patch" - QC optimized libraries from nexus
"HQ Video Recording" - 20 mbps bitrate and better videorecording quality
"Fix Audio in VideoRec" - fix for audio in video recording
"AutoRun(init.d) support" - init.d support))
Fast dormancy settings only for RU users.
Click to expand...
Click to collapse
Am interested to hear your reply to John98Zakaria questions too before trying this out

I was on sijav's DualRecovery .101 ROM.
Now I wanted to try a 4.4.2 official ROM so I chose this one.
What I have done:
Downloaded stripped ftf (C5503_10.5.A.0.230_stripped.ftf) and pushed to firmwares folder in Flashtool (0.9.16)
Downloaded deodexed zip (dkitkat.zip) and pushed to SDCard
Rebooted phone to TeamWin Recovery on sijav's ROM (pressed down when led turned green), made dalvik wipe and cache wipe
Installed firmware zip (dkitkat.zip) from SDCard
Tweaks in Aroma selected:
"SDCard Access Fix" - allow app to use sdcard normally
"Bionic patch" - QC optimized libraries from nexus
"Dalvik patch" - QC optimized libraries from nexus
"HQ Video Recording" - 20 mbps bitrate and better videorecording quality
"Fix Audio in VideoRec" - fix for audio in video recording
"AutoRun(init.d) support" - init.d support))
Shutdown phone (this was automatic after installation, I think, but I took battery off anyway)
Ran flashtool, selected stripped firmware (C5503_10.5.A.0.230_stripped.tft), unchecked DATA from Wipe section (I wanted to keep data, but I had made a Titanium backup of all apps and data just in case keeping data didn't work) and flashed it (connected turned-off phone to PC via USB cable while I pressed volume-down button)
Booted and everything worked.
Xposed modules didn't work on first boot because you need to reinstall Xposed again. Reinstall from Xposed app and then reboot, everything from Xposed worked.
Used Force GPU Rendering in developer options if Settings is laggy (I haven't noticed any lag, but I keep that option on)
ROM has root, busybox, dual recovery preinstalled (checked)
I also applied this fix just in case Google Play Services causes bad battery.
I have deleted all Sony Social apps, Facebook and Twitter, never have used them, never will
Thanks a lot to xenius9 and sijav for all your help :highfive:

Will try to flash deodexed version when I get hone from work! Thanks a lot! Keep up the good work!
Sent from my C5503 using XDA Free mobile app

Still waiting for an answer how were these tweaks done

So I flashed the latest kitkat zip and so far everything works fine. Definitely saw improvements on battery life! Only problem is on the previous 4.3 jellybean my walkman app is updated to the latest version, as for kitkat it shows that my walkman app is already latest when I know it is older based on the ui. Help please?
Sent from my C5503 using XDA Free mobile app

Added Settings.apk from .233 firmware - fix for lags, details on 1st post.

xenius9 said:
Added Settings.apk from .233 firmware - fix for lags, details on 1st post.
Click to expand...
Click to collapse
Thanks a lot :good:
But I tried installing the .apk and it says "App not installed" after Android informs that the app will update an already-installed app.
I'm not sure if I should replace the app, but I couldn't find the original in /system/app

BarajaVLC said:
Thanks a lot :good:
But I tried installing the .apk and it says "App not installed" after Android informs that the app will update an already-installed app.
I'm not sure if I should replace the app, but I couldn't find the original in /system/app
Click to expand...
Click to collapse
Unzip and place files to system/priv-app and set correct permissions.

on C5502
Would it work fine on a C5502 device? I only flashed the kernel so that I can install superSU which I couldn't since upgrading to 4.4.2 and everything works fine. wondering if all other perks come at no price if I install the Rom.

How about including Art runtime in aroma?

mtabzr said:
Would it work fine on a C5502 device? I only flashed the kernel so that I can install superSU which I couldn't since upgrading to 4.4.2 and everything works fine. wondering if all other perks come at no price if I install the Rom.
Click to expand...
Click to collapse
Have you tried it?
Does it work fine in C5502?

does this rom have the stock chinese input from sony ?

[ROM] G530FZ stock 5.0.2, deodexed, root, xposed framework

Deodexed, debloated stok rom with supersu, busybox, xposed framework and updated minimal google apps.
Flash this rom with custom TWRP recovery FOR LOLLIPOP -> http://forum.xda-developers.com/grand-prime/development/custom-recovery-twrp-2-8-7-0for-lollipop-t3190351
Make sure you follow all the steps correctly:
1. download all files and put them on SD Card
2. boot into TWRP recovery
3. do a complete wipe (system, data, cache, internal storage)
4. first flash only G530fz_502_deodex_xposed.zip
5. when finished on the same screen WIPE CACHE
6. reboot to system and wait for rom to boot up, IT WILL LAST 10 MINUTES maybe more, it is normal for deodexed roms
7. once the language menu shows up you can reboot to recovery again
8. this time DO NOT wipe just flash xposed-v65-sdk21-arm-arter97-V5-generic[1].zip
9. DO NOT wipe cache and reboot to system
10. this time system boots faster but apps will be updated
11. when you complete setup first update SU binary in superuser app
12. install XposedInstaller_3.0_alpha4[1].apk and reboot
13. open Xposed app it should say framework is connected
14. optionally make a backup and enjoy your phone
DOWNLOAD G530FZ deodexed xposed rom
SCREENSHOTS (rom has stock settings and launcher. screenshots might look little different as I use dpi 220, navbar in build.prop and action launcher on my phone..)
If you like this, you can buy me a beer, thanks!
____
Base rom is http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
Credits:
twrp recovery http://forum.xda-developers.com/grand-prime/development/custom-recovery-twrp-2-8-7-0for-lollipop-t3190351
xposed lollipop http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
deodexer - http://forum.xda-developers.com/android/software-hacking/script-app-joeldroid-lollipop-batch-t2980857
how to deodex - http://forum.xda-developers.com/sprint-galaxy-s5/general/how-to-deodex-lollipop-rom-t3065596
justarchi kitchen - https://github.com/JustArchi/ArchiKitchen
stericson -busybox
chainfire -supersu

If you are wondering what modules work, I attached wanam module for lollipop.
For status bar modding use http://repo.xposed.info/module/com.bocharov.xposed.fsbi, xstana isn't fully compatible with stock samsung lollipop roms.

Can i flash this rom on my galaxy grand prime model g530H...?

great jop >>> hope that it moded for g530h

Nasir javed said:
Can i flash this rom on my galaxy grand prime model g530H...?
Click to expand...
Click to collapse
zshou92 said:
great jop >>> hope that it moded for g530h
Click to expand...
Click to collapse
I don't think it will work, I will try to make rom for G530H later.
I just need these files from g530h running stock 5.0.2 rom and TWRP recovery:
/cache/recovery/last_log
and all files from these folders:
/system/app
/system/priv-app
/system/framework
also version number of stock rom that the phone is running or link to download from sammobile / samsung-updates sites
These files must be pulled with adb or file manager, I need files from rom that is in use, if I extract files from stock odin tar it might not work.
If someone can send me these files I will make you deodexed rom. :good:

hangy18 said:
I don't think it will work, I will try to make rom for G530H later.
I just need these files from g530h running stock 5.0.2 rom and TWRP recovery:
/cache/recovery/last_log
and all files from these folders:
/system/app
/system/priv-app
/system/framework
also version number of stock rom that the phone is running or link to download from sammobile / samsung-updates sites
These files must be pulled with adb or file manager, I need files from rom that is in use, if I extract files from stock odin tar it might not work.
If someone can send me these files I will make you deodexed rom. :good:
Click to expand...
Click to collapse
here's the last_log
http://www.datafilehost.com/d/35178a46
rom base
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
the apk's
http://www.mediafire.com/?d35x0z8187cch0r
pull from adb :

Thank you very much !!!
i'll try this night
Edit: Thank you it works perfectly on my G530FZ.

working well on my g530fz

What apps are removed? But great. Finaly some development for this phone!

pajocos said:
What apps are removed? But great. Finaly some development for this phone!
Click to expand...
Click to collapse
All Google apps except Google play, galaxy apps market and knox apps since it was disabled

pajocos said:
What apps are removed? But great. Finaly some development for this phone!
Click to expand...
Click to collapse
Pd.Chal said:
here's the last_log
http://www.datafilehost.com/d/35178a46
rom base
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
the apk's
http://www.mediafire.com/?d35x0z8187cch0r
pull from adb :
Click to expand...
Click to collapse
Thanks I will make rom for g530h during the weekend.

weather widget is missing. Is it suposed? I'm looking in system.rar that you uploaded but still didn't find him

Unfortunately nothing works for me
Probably it is caused by encrypted storage in my case but flashing TWRP via Odin leads to boot into black screen with coloured vertical strips but nothing else....flashing back PhilZ CWM works but using it for installation of this ROM doesn't work (as expected)...
So, what do you suggest? Flashing back Stock ROM (v4.4.4) and trying it again or is there anyone else with the same issues but with unencrypted phone?
Thx for your help,
x.

waiting for the 530H

Good day!
Let's make this happen! How can i help? I have G530H with XXU baseband.
Sent from my SM-G530H using XDA Free mobile app

ZenitramXdaDev said:
Let's make this happen! How can i help? I have G530H with XXU baseband.
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/grand-prime/development/mini-rom-deodex-apps-lollipop-5-0-2-t3194189 another user made it already

pajocos said:
weather widget is missing. Is it suposed? I'm looking in system.rar that you uploaded but still didn't find him
Click to expand...
Click to collapse
I may have deleted some more apps, there you go:
https://mega.nz/#!RVFDWDSD!_jTpUTYE5h9t07WGPphWoUTXIj-Z0fmv5YRnlxF5p94

i deleted the weather app

xkovi said:
Unfortunately nothing works for me
So, what do you suggest? Flashing back Stock ROM (v4.4.4) and trying it again or is there anyone else with the same issues but with unencrypted phone?
Click to expand...
Click to collapse
I don't have any knowledge of encryption in android, try searching xda forums for more advice, but I think such features were designed to be used with stock system and recovery. Also samsung KNOX is disabled in this rom but I am not sure if it affects device encryption in any way.

Pd.Chal said:
here's the last_log
http://www.datafilehost.com/d/35178a46
rom base
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
the apk's
http://www.mediafire.com/?d35x0z8187cch0r
pull from adb :
Click to expand...
Click to collapse
Hi, is this rom working http://forum.xda-developers.com/grand-prime/development/mini-rom-deodex-apps-lollipop-5-0-2-t3194189 ?
I am not sure if version for g530h is still needed.
Let me know.
Thanks

[ROM] SPH-L720 OK3 Stock Deodexed

This is my first ROM for public use.
I used SuperR kitchen to deodexed and deknoxed.
* USB DEBUGGING Enabled by default.
* R/W fixed in permission for ExtSdCard
That's it no other tweaks...
Thanks to
@SuperR. for his kitchen-here
@bilgerryan for keeping the S4 alive!
To install the ROM
1. copy the zip to the extSdCard
2. TWRP recovery
3. Go into recovery mode.
4. Wipe Dalvik, Cache, system, data.
5. Perform factory reset before installing zip
6. Install zip.
7. Reboot.
This has been tested on SPH-L720
If you download press the thanks button.
DOWNLOAD ROM-here
OK3 Kernel Download -here
OK3 Modem Download (Flash with Odin)-here
[MOD] Hotspot Mod (My first Mod)
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Hotspot-Mod Download-here
[MOD] Recent Apps Mod
This will add a recent apps shortcut to the pulldown statusbar.
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Recent Apps Mod Download-here
More mod and links -here

About device screenshots

OK3 kernel Download updated.
Has Anyone flashed this Rom? Is everything fine?
My first rom just curious.

Did they touch the modem in the OK3 update or is it the same as OH1/OD2?

nismotigerwvu said:
Did they touch the modem in the OK3 update or is it the same as OH1/OD2?
Click to expand...
Click to collapse
I'm not sure. I Odin the OK3 Stock tar. So I'm really not positive but I think they did.
EDIT. Yes they did.

nismotigerwvu said:
Did they touch the modem in the OK3 update or is it the same as OH1/OD2?
Click to expand...
Click to collapse
It's really impossible for us to know as Samsung does not release any information on the modem.

OK3 Modem tar download added to OP in case someone needs it

My first Mod Hotspot-Mod Download link updated in OP. Please give feedback as I am still learning.. lol

I Gave It a Go...
I tried installing it this evening. Loaded just fine. But, I couldn't get the WIFI to turn on. But, I attempted to load all three of your modules at the same time: ROM, Kernel & Hot-Spot Mod. Some other stuff (kids!) came up, so I had to restore from my Nandroid Backup and move on. If I get some time tomorrow, I'll try them one at a time (in order) and let you know how that goes. Thanks for doing this.

dsjxxxxx said:
I tried installing it this evening. Loaded just fine. But, I couldn't get the WIFI to turn on. But, I attempted to load all three of your modules at the same time: ROM, Kernel & Hot-Spot Mod. Some other stuff (kids!) came up, so I had to restore from my Nandroid Backup and move on. If I get some time tomorrow, I'll try them one at a time (in order) and let you know how that goes. Thanks for doing this.
Click to expand...
Click to collapse
Try flashing modem with odin.
Sent from my SPH-L720 using Tapatalk

[MOD] Recent Apps Mod
[MOD] Recent Apps Mod
This will add a recent apps shortcut to the pulldown statusbar.
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Download
https://www.androidfilehost.com/?fid=24391638059058192

Downloaded modem zip and it's labeled as an md5 but it's 60mb is this just a typo?

knoc said:
Downloaded modem zip and it's labeled as an md5 but it's 60mb is this just a typo?
Click to expand...
Click to collapse
Its not a zip file. Modem must be flashed with odin.

When I load.it through mobile Odin it uses modem 1 and modem2 slot..I'm on cm13 oh1 I can just flash through mobile Odin can't I?

knoc said:
When I load.it through mobile Odin it uses modem 1 and modem2 slot..I'm on cm13 oh1 I can just flash through mobile Odin can't I?
Click to expand...
Click to collapse
No, Mobile Odin hasn't worked since Jelly Bean.

It Works! It Works With Xposed!
Yes. I needed the modem. Everything works great - including Xposed. Thanks!!!
For those who need it, I provide a summary of the steps I took that resulted in success.
Base OK3 Install
1) Installed the OK3 ROM (SPH-L720_OK3_Stock_Deodexed.zip) using TWRP, following the 7 steps listed in katodragon's original post (including reboot).
- The phone took ~15 minutes on the Samsung splash screen (black background with pseudo fireworks coming out of the logo) to set up. Patience is required.
- No wifi. The ROM could not turn on the radio. The slider would hang halfway to on. If I backed out and went back to the setting, it was clearly "off."​
2) Installed the OK3 Kernel (SPH-L720_Stock-Deodexed-kernel.zip) using TWRP.
- I did perform another factory reset with TWRP just before installing the zip using TWRP, then rebooted. I did not wipe the system partition, though.
- Still no wifi. Same deal.
- I'm not sure if the kernel is necessary. But, everything is working well for me WITH the kernel. Enough said.​
3) Installed the OK3 Modem (OK3_Modem.tar.md5) using ODIN.
- Followed the usual process: phone in download mode, selected "AP" in ODIN, et cetera.
- Success! Everything - including wifi - has worked well since.
- Performed a NANDROID Backup using TWRP at this point, but I have not had to restore from it.​Xposed Install
1) Side-loaded "Xposed Installer" (XposedInstaller_3.0_alpha4.apk).
- Just for chuckles, I tried to fire it up. In failing, the app asked if the Xposed Framework was install (it wasn't).​
2) Installed "Xposed Framework" (xposed-v75-sdk21-arm-arter97-snapdragon_requestConcurrentGC.zip) using TWRP.
- This time, I did not clear anything before installing the zip (because it isn't a ROM).
- My first attempt failed, but I received a clear report (in bold red letters) that I needed to use the "ConcurrentGC" version of the framework. The successful file is referenced above.
- Rebooted.
- Success! I have installed several (~12) Xposed Modules since. Mostly side-loaded, but a few from the Play Store. Zero issues.​
Xposed Notes
- Resources I Found Helpful
a) Announcement w/ Directions (rovo89): http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
b) HighonAndroid (Max Lee): http://highonandroid.com/android-ap...ed-installer-on-android-lollipop-5-05-15-1-1/
c) Xposed Module Repository: http://repo.xposed.info/module-overview
d) Wanam's Xposed Module Repository: http://repo.xposed.info/users/wanam
This is where I scored "Wanam Xposed for Android 5.x.x."​
- Xposed Installer (rovo89): http://forum.xda-developers.com/showthread.php?t=3034811
- Xposed Framework (arter97): http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Thank You to KATODRAGON
Again, thanks to katodragon for the deodexed ROM for the SPH-L720! It's been about five months since I upgraded to Lollipop. And, that means five months without Xposed. Thanks to him, I'm back to where I want to be.
---------- Post added at 09:25 PM ---------- Previous post was at 09:22 PM ----------
katodragon said:
Its not a zip file. Modem must be flashed with odin.
Click to expand...
Click to collapse
I successfully installed the OK3 Modem file as-is (including the MD5 extension) using ODIN v3.10.6 (Windows 10 Pro desktop PC).

^^^ Great Post ^^^ Glad it working for you! Which exposed modules are u using?
Sent from my SPH-L720 using Tapatalk

katodragon said:
^^^ Great Post ^^^ Glad it working for you! Which exposed modules are u using?
Click to expand...
Click to collapse
Current Modules (all working - no issues):
3C Toolbox Pro v1.6.9
AdBlocker v1.4
Fix Lollipop Memory Leak v1.2
Greenify v2.7.1 (highly recommend this app)
Magnet Sensor Control v1.1
No Lock Home v2.0.1
Play Store Link in App Info v1.0
SwiftKey Goodness on More Fields v1.0
Wanam Xposed for 5.X.X v1.3.0 (highly recommend this app)
Waze Audio Interceptor v1.0 (not tested yet)
WiFi Filter v1.0.1
XInstaller v5.0 (not all functions work - but not causing any problems either)
Xposed Torch v2.1.1​
I also have Secure Settings v1.3.6, but it is not detecting the presence of Xposed. So, I can't used the one Xposed function in the app. It's not a function that I'm looking to use, so I decided not to mess around with it. But, I'm guessing that the problem MIGHT be fixable by CAREFULLY uninstalling the app, then reinstalling it. My hypothesis is that the problem stems from Secure Settings being installed before Xposed. Something that I left out of my last post is that I restored (Titanium Backup) all of my apps and data after completing the OK3 install but before I attempted to install Xposed.
---------- Post added at 11:40 PM ---------- Previous post was at 11:29 PM ----------
katodragon said:
[MOD] Recent Apps Mod
This will add a recent apps shortcut to the pulldown statusbar.
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Download
https://www.androidfilehost.com/?fid=24391638059057708
Click to expand...
Click to collapse
I was going to give this mod a try. When I clicked the download link, I got a message saying that the file has been deleted.
FYI. I decided not to try out the Hotspot Mod because I use Ting (a less-expensive way to use the Sprint network) as my carrier. Ting lets me use the native hotspot capability for no extra charge.

Sorry. Try the link in the first post. I forgot to update that one.

dsjxxxxx said:
Current Modules (all working - no issues):
3C Toolbox Pro v1.6.9
AdBlocker v1.4
Fix Lollipop Memory Leak v1.2
Greenify v2.7.1 (highly recommend this app)
Magnet Sensor Control v1.1
No Lock Home v2.0.1
Play Store Link in App Info v1.0
SwiftKey Goodness on More Fields v1.0
Wanam Xposed for 5.X.X v1.3.0 (highly recommend this app)
Waze Audio Interceptor v1.0 (not tested yet)
WiFi Filter v1.0.1
XInstaller v5.0 (not all functions work - but not causing any problems either)
Xposed Torch v2.1.1​
I also have Secure Settings v1.3.6, but it is not detecting the presence of Xposed. So, I can't used the one Xposed function in the app. It's not a function that I'm looking to use, so I decided not to mess around with it. But, I'm guessing that the problem MIGHT be fixable by CAREFULLY uninstalling the app, then reinstalling it. My hypothesis is that the problem stems from Secure Settings being installed before Xposed. Something that I left out of my last post is that I restored (Titanium Backup) all of my apps and data after completing the OK3 install but before I attempted to install Xposed.
---------- Post added at 11:40 PM ---------- Previous post was at 11:29 PM ----------
I was going to give this mod a try. When I clicked the download link, I got a message saying that the file has been deleted.
FYI. I decided not to try out the Hotspot Mod because I use Ting (a less-expensive way to use the Sprint network) as my carrier. Ting lets me use the native hotspot capability for no extra charge.
Click to expand...
Click to collapse
Here are my Xposed Modules
--APM+ (I like that you can use the screen record function)
--Downloads2SD
--Fix Lollipop Memory Leak (not sure if I still need this with OK3)
--Greenify with donation features
--Wanam Xposed
--YouTube AdAway

Blackview BV6000 Xposed Problem

Hello,
I have a Problem with Xposed on My Blackview BV 6000
Xposed Installer says Xposed is active (ver. 86) but none of the modules are working.
The modules alwasy asking me to activate them in Xposed and reboot, if iam doing so its the same after the next reboot.
I Tried this with some modules and it seems like really none of them is working.
I tried:
Xprivacy
Audio Balance
CPU Temp
and some more others.
Im Using a Blackview BV6000
It is a Android 6.0 Device
Im using Xposed-v86-sdk23-arm64
APK is: XposedInstaller_3.0_alpha4
I´am Using SuperSu v 2.76
When i Try to Read the Logs In Xposed it says No Such File or Directory....
Hope somebody can help me...

noboby said:
Hello,
I have a Problem with Xposed on My Blackview BV 6000
Xposed Installer says Xposed is active (ver. 86) but none of the modules are working.
The modules alwasy asking me to activate them in Xposed and reboot, if iam doing so its the same after the next reboot.
I Tried this with some modules and it seems like really none of them is working.
I tried:
Xprivacy
Audio Balance
CPU Temp
and some more others.
Im Using a Blackview BV6000
It is a Android 6.0 Device
Im using Xposed-v86-sdk23-arm64
APK is: XposedInstaller_3.0_alpha4
I´am Using SuperSu v 2.76
When i Try to Read the Logs In Xposed it says No Such File or Directory....
Hope somebody can help me...
Click to expand...
Click to collapse
Hi.
You can try my grorkmod. It was created for the Telephone p9000, but works also for other chinaphones.
It look like mediatek (?) had a bug in their boot.img.
To be sure you can provide the following files:
/file_contexts
/seapp_contexts
Greetings
Vsrookie
Grorkmod v1.0
Sent from my P9000 using XDA-Developers mobile app

vsrookie said:
Hi.
You can try my grorkmod. It was created for the Telephone p9000, but works also for other chinaphones.
It look like mediatek (?) had a bug in their boot.img.
To be sure you can provide the following files:
/file_contexts
/seapp_contexts
Greetings
Vsrookie
Grorkmod v1.0
Sent from my P9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
I installed my Backup to have a Clean Start, then i installed grorkmod like is in the discription in the grorkmod-thread.
I Looks like Xposed is Working fine Now.
Thank You very Much for your Hint!

I can confirm grorkmod to fix xposed on my BV6000 FW20160713.
What I did:
- Flash TWRP Recovery with the sp-flash-tool (I used Version 1628 linux)
- boot into recovery
- install Supersu
- boot into system
- install busybox
- generate a ZIP file within the busybox app (and copy it to external sd)
- power off
- boot into recovery
- wipe Dalvik/ART Cache
- wipe entire System/Data (factory reset)
- power off (either by entering halt in terminal or by holding down the power button)
- reflash 20160713_s12v55_jk_3m with sp-flash-tool, replacing recovery.img with the TWRP one. (I suppose you can just exclude it, as it is still installed)
- boot into recovery
- wipe cache again (don't know if necessary)
- install busybox, supersu, grorkmod, xposed
- reboot into system
- installed xposedinstaller
- rebooted (through normal system's power button, not xposedInstallers menu)
- activated xprivacy in xposedinstaller
- installed xprivacy
- rebooted (again the system way)
Success
The hardware reboot within xposedinstaller still returns the error:
sush: <stdin>[8]: /data/user/0/de.robv.xposed.installer/cache/busybox-xposed:not found
The software reboot did produce a bootloop, though that was before I found grorkmod. I do not intend to try it out again.
@vsrookie
What worries me a bit:
Understand this:
SELinux is a abbreviation for Security Enhanced Linux. That isn't just a name, it's the programm.
With this mod you will loose the S in the name.
Click to expand...
Click to collapse
Would it make sense to make a "grorkmod-lite" that only fixes the broken contexts? (I know this question might sound dump)

hanseatic2 said:
I can confirm grorkmod to fix xposed on my BV6000 FW20160713.
What I did:
- Flash TWRP Recovery with the sp-flash-tool (I used Version 1628 linux)
- boot into recovery
- install Supersu
- boot into system
- install busybox
- generate a ZIP file within the busybox app (and copy it to external sd)
- power off
- boot into recovery
- wipe Dalvik/ART Cache
- wipe entire System/Data (factory reset)
- power off (either by entering halt in terminal or by holding down the power button)
- reflash 20160713_s12v55_jk_3m with sp-flash-tool, replacing recovery.img with the TWRP one. (I suppose you can just exclude it, as it is still installed)
- boot into recovery
- wipe cache again (don't know if necessary)
- install busybox, supersu, grorkmod, xposed
- reboot into system
- installed xposedinstaller
- rebooted (through normal system's power button, not xposedInstallers menu)
- activated xprivacy in xposedinstaller
- installed xprivacy
- rebooted (again the system way)
Success
The hardware reboot within xposedinstaller still returns the error:
sush: <stdin>[8]: /data/user/0/de.robv.xposed.installer/cache/busybox-xposed:not found
The software reboot did produce a bootloop, though that was before I found grorkmod. I do not intend to try it out again.
@vsrookie
What worries me a bit:
Would it make sense to make a "grorkmod-lite" that only fixes the broken contexts? (I know this question might sound dump)
Click to expand...
Click to collapse
Hi.
Thank you for trying my mod.
This was a hint for the old version < 1.0.
In 1.0 everything is fine. It "only" fixes the needed files.
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app

If you update firmware via official OTA to avoid boot loop uninstall xposed by flashing the zip xposed Uninstaller for marshmallow(on xda thread)! After first reboot u have to re flash supersu grorkmod and xposed (clearing caches). I've lost two hours to understand!

vsrookie said:
Hi.
Thank you for trying my mod.
This was a hint for the old version < 1.0.
In 1.0 everything is fine. It "only" fixes the needed files.
greetings
vsrookie
Sent from my P9000 using
Click to expand...
Click to collapse
Which version do you think (or know) will be better for BV6000 rooted with GizBeat manual? 1.0? or 1.1?

Xposed Bv6000 Android7
Hi
I rooted my BV6000 on Android 7.
Is it possible to install XPOSED?
And if, how? (no rom of android 7 available; people with bricked phones after downgrading)
Thanks for your help!!!
Cheers

Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html

[ROM][KangV Tools][VNS-LX1] Arsenik Rom

Arsenik Rom
For Huawei P9 lite
ALL CREDITS GOES TO KangV !!
ASK PERMISSION BEFORE TAKING MY WORK(EVEN PARTIALLY)​
FEATURES
+based on b380/b385 version
+pre-rooted with chainfire's SuperSu, you can choose also MagikSu
+Kernel adiutor installed
+Emui theme editor installed
+Fingerprint quick action installed
+ double tap to wake up, draw a letter to wake up added
+ deleted all huawei chinese apps and added some missed google apps
+VNS-L31
+VNS-L21(need testers for other variants)
+transparent notification shade enabled
+App twin added
+p10 camera app added
+android O bootanimation added
+android O emojis
+3d panorama app added
+added the ability to make earpiece acting as a speaker and increased it ,you will have an amazing sound when you put your phone next to your ear,trust me
+more performance and less battery drain
+adblock -MoaAB- via k-setting
+new Viper4Android interface for 2.5
+raw image mode added
+June security patch
+slow motion camera mode
+KangVip framework added !
INSTRUCTIONS
1.download the zip file and extract it, you will find system.img and flash_patch.zip.
2..Reboot to latest TWRP
3..backup system,boot,vendor
4.flash system.img via install image (install image>choose system.img> select SYSTEM
5.Flash 'flash_patch.zip
6.reboot system(it will take about 10-15min)
7.reboot again to twrp(this is stupid, but sorry you have to do that otherwise magisk won't mount image)
8.go to third post and chose which root you want, you can choose between magisk or supersu
9.reboot(it won't be as long as the first boot)
DOWNLOAD LINK
Arsenik Rom-V2
THANK YOU ALL FOR THE 616 DOWNLOADS of Arsenik v1.1 IN LESS THAN 30 DAYS !
If you cant insert a pin code at first boot, please flash this zip
https://drive.google.com/file/d/0By4OnnXj6y6ebDF5Vk9OcW9ZUkU/view?usp=drivesdk
i recommend to download it and flash it, so that you will be sure that you wont have this bug
BUGS
+usb debugging is disabled when you reboot
NOTES
+do not update supersu binaries because it won't work, flash Special SuperSu for Arsenik Rom in 3rd post instead
CREDITS
+KangV for his awesome Kangvip Framework !
+ @Tecalote for helping me
+ @Chainfire for his awesome superSU
+ @OldDroid (openKirin team) for bringing us TWRP.
+ @millo1978 for giving a fix to call recording
+ @NoctisCaelumFFXV for testing in his VNS-L21
+ @Chisetdel31260 for testing in his VNS-L31
+ @BSDgeek_Jake for creating the amazing MoaAB !!
+ @zgomot for the tip of enabling raw mode
i spent endless hours so as to make kangvip framework working on our p9 lite, every donation will be much appreciated!​

Screenshots Of ArseniK rom http://bit.ly/2sojvYG

ROOT METHODS
======FOR ARSENIK V2 ONLY==========
- chainfire's SuperSu 2.78 (it is preinstalled)
***update Supersu to latest version 2.82:
http://bit.ly/2ublmkr thanks to @Tecalote highly recommended)
-Magisk v13.3(updated to latest version)
the old method doesn't work well, safetynet isnt bypassed, this new method works like a charm :
Follow this steps so as to k-setting would not crash:
-go to supersu app and remove all permissions,dont revoke it,juste remove it.
1/flash this file http://bit.ly/2ubcR8L
2/open kernel adiutor mod, open the left panel and enable init.d
3/uninstall Supersu app
4/check if usb debugging is enabled
5/done
ps: in kernel adiutor you will see that selinux is enforcing, but in truth selinux is permissive
==========FOR ARSENIK V1/v1.1==========
- chainfire's SuperSu 2.78 (it is preinstalled)
***update Supersu to latest version 2.82:
https://drive.google.com/file/d/0B-fDlEGo76S0Q0RwalRZNDROZFU/view?usp=drivesdk thanks to @Tecalote !***(highly recommended)
-Magisk v13 (updated to latest version)
the old method doesn't work well, safetynet isnt bypassed, this new method works like a charm :
Follow this steps so as to k-setting would not crash:
-go to supersu app and remove all permissions,dont revoke it,juste remove it.
1/flash this file http://bit.ly/2udKEii
2/open kernel adiutor mod, open the left panel and enable init.d
3/uninstall Supersu app
4/check if usb debugging is enabled
5/done
ps: in kernel adiutor you will see that selinux is enforcing, but in truth selinux is permissive
NOTE : IF YOU FLASHED MAGISK AND YOU WANNA INSTALL SUPERSU, UNINSTALL MAGISK BEFORE AND THEN INSTALL SUPERSU

CHANGELOG
Arsenic + BugFixer
✓first release
Arsenik + BugFixer2 :
✓Fixed Hw call recorder
✓Fixed camera force close
Arsenik-V1.1
✓Fixed hw sound recorder force close
✓increased earpiece sound for best dual-speaker
✓changed interface of Viper4android
✓mixed Arsenik and BugFixer 2 in one flash-able zip
✓set google play as a system app(now you can wipe data without flashing gapps)
✓added rotation of the home screen
✓Now you can use Adblock from K-setting !
Arsenik-v1.1 + SmallUpdate.zip
✓added the majority of gapps
✓added raw mode, stock gallery app can even read .dng files also !!
Arsenik-v2.0 :
✓based on b385, with june security patch
✓changelog of kangV , translated to English using Google translator : https://pastebin.com/a3t7SMp3

SOME TIPS&TRICKS
HOW TO ENABLE RAW FORMAT:
1)Open camera app, swipe to the top(it wil enable pro mode
2) swipe to the left( it will enable setting)
3)click on raw format
4) Done
Raw mode will take two pictures, one in .dng format, and another one in .jpg format .So don't worry if you see two pictures instead of one
HOW TO ENABLE GOOGLE ASSISTANT
1/go to settings=>app=>google=>permissions
2/enable all the permission
3/go to setting=>app=>setting=>voice assistant & outpout and set google
4/go to google app=>setting=>setting=>phone=> 'ok google detection' =>retrain voice model
5/train your voice and go back to homescreen and tell ok google, google assistant will appear

five

Hi simo255
Call recording...
With Nougat I used this:
http://www.androidiani.com/forum/showthread.php?p=7832522
(Italian forum)
It worked good with B370...
Maybe with B380 also, but I didn't test it.
(Now I have Android 6)
Try and tell me
Inviato dal mio HUAWEI VNS-L21 utilizzando Tapatalk

Hello. Installation it went well, I will continue to discover. Thank you for all your work.

millo1978 said:
Hi simo255
Call recording...
With Nougat I used this:
http://www.androidiani.com/forum/showthread.php?p=7832522
(Italian forum)
It worked good with B370...
Maybe with B380 also, but I didn't test it.
(Now I have Android 6)
Try and tell me
Inviato dal mio HUAWEI VNS-L21 utilizzando Tapatalk
Click to expand...
Click to collapse
yes it works !
thank you!
i will upload a fix soon
Chisetdel31260 said:
Hello. Installation it went well, I will continue to discover. Thank you for all your work.
Click to expand...
Click to collapse
thanks, check please and tell me if there is any bug

i found new bug, camera force close sometimes,
will try to fix it asap

new root method! !
magisk v13

Got an error on TWRP while flashing "zip file is corrupted" . Im on L31C432B380 using OpenKirin TWRP

nitroax said:
Got an error on TWRP while flashing "zip file is corrupted" . Im on L31C432B380 using OpenKirin TWRP
Click to expand...
Click to collapse
corrupted? are u sure
check if you downloaded the files correctly

simo255 said:
new root method! !
magisk v13
Click to expand...
Click to collapse
We can install magisk v13 beta now, directly or wait?

Chisetdel31260 said:
We can install magisk v13 beta now, directly or wait?
Click to expand...
Click to collapse
flash the zip that i provided, otherwise it won't work

simo255 said:
corrupted? are u sure
check if you downloaded the files correctly
Click to expand...
Click to collapse
will try again but know i cant boot to the stock system. Flashing this rom will work anyway?

nitroax said:
will try again but know i cant boot to the stock system. Flashing this rom will work anyway?
Click to expand...
Click to collapse
yes
did you backup system ? if yes restore it !

simo255 said:
yes
did you backup system ? if yes restore it !
Click to expand...
Click to collapse
I have a "old" backup in my home PC so i didnt backed up this time. Will try flash again without restore the system. If it doesnt work, later i will put the backup in the SD and restore it

nitroax said:
I have a "old" backup in my home PC so i didnt backed up this time. Will try flash again without restore the system. If it doesnt work, later i will put the backup in the SD and restore it
Click to expand...
Click to collapse
old backups won't work with 3.1.1-0 recovery, i suggest you to flaqh system.img through fastboot

simo255 said:
old backups won't work with 3.1.1-0 recovery, i suggest you to flaqh system.img through fastboot
Click to expand...
Click to collapse
yeah i know, i will restore it with the same recovery i did the backup. Anyway i downloaded your rom again and will try to flash it again
EDIT: This time worked, booting right now. Will give the feedback later. Thanks