Database Develop

[Tool] OneClickRoot - ONLINE

DISCLAIMER
Rooting devices involves dangerous procedures that might leave your phone in an unusable state if not followed to the letter. I am not responsable for you bricking your device. DO THIS AT YOUR RISK AND RESPONSABILITY
THIS IS FOR STOCK DEVICES ONLY
INTRODUCTION
Hi,this tool is intended to make the rooting process a little easier than already is however, is a work in progress and I am new to this, so I expect feedback, comments and advices as I am no dev. Thanks for the support
THE TOOL
This is a tool for rooting the International Galaxy Note (GT-N7000) only. It runs all the methods known at the moment. I have not developed anything but gather all the procesess in just one script file.
Take into consideration that this is not one click only, as the root for ICS and GB 2.3.6 need interaction with the user and in the latter case needs the use of Odin to downgrade.
Rooting Methods
Gingerbread
Version 2.3.5 is direct rootable with DooMLoRD'S easy rooting Kit (included in the script)
Version 2.3.6 is downgraded to a prerooted 2.3.5 rom (which is downloaded and pushed to the device). From there, you can flash Mobile Odin and update to any Android version you are willing.
IceCream Sandwich and JellyBean
You can choose among three choices External sdcard is required for this!!.:
1. Flashing signed zip version of Philz kernel (safe kernel + advanced recovery)
2. Flashing SuperSU in stock recovery without changing the kernel.
3. Flashing SU and busybox in stock recovery.
You can choose to root using Exynos Abuse app from Chainfire also (Not included in the script). For this method go to these threads:
http://forum.xda-developers.com/showthread.php?t=2050297
http://forum.xda-developers.com/showthread.php?t=1329360
The tool guides you through the whole process and prompts the instructions in the cmd session. The files needed to gain root access will be downloaded automatically by the script and md5sum checked. However, you need to follow instructions in order to suceed.
INSTRUCTIONS
This is a windows script only...to succeed, follow these steps:
Samsung drivers have to be installed. Install Kies in your PC to get the lastest drivers. Make sure that the phone is unplugged when you install the drivers.
Download the GalaxyNote-OneClickRoot.zip file and unzip it somewhere you can find it.
Open the OneClickRoot.cmd file as administrator (use right click over the file and run as administrator)
Enable USB debugging in the phone.
Plug the phone to the PC and just follow the instructions.
ENJOY!!
Note: The hack tools used in this script do not belong or were developed by me. I thank all the dev's and contributors that made this script possible. Thanks to:
Philz3759 for his amazing work with the kernels.
Dr. Ketan for the feedback and support.
Chainfire for his constant contributions to the GN community.
XDA for being such a great community.
All the guys in the aahkSupport IRC channel for letting be part of this community, the patience and the teaching (attn1, shad0wf0x, Anthony1s, burgd, Paxtoncamaro91, hyuh, and so many others)
DOWNLOAD
http://d-h.st/3xa
MD5sum: 16fc4b3da33cf32a45aecd58b0e1b060
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

CHANGELOG
22022013 - Official JB Philz Kernels added.
30012013 - Rooting methods now includes flashing SuperSU no safe kernel and flashing SU + Busybox. Unroot no longer supported.
28012013 - ICS rooting process updated to flash Philz Kernel in stock recovery, Build version automatically detected.
19082012 - ICS rooting process updated to flash Speedmod or Notecore Kernels thanks to hardcore and g.lewarne.
02082012 - ICS rooting method was removed due to the discoveries in this thread (READ CAREFULLY): http://forum.xda-developers.com/showthread.php?t=1810954
26072012_v2 - Now creates the folder firmware to push the zImage file to flash kernel in Android 2.3.6
26072012 - Some cosmetic improvements.
22072012_v2 - Fix md5sum check in cf-kernel image. Added unroot support for Android 2.3.5 and ICS.
22072012 - Fix md5sum check in downgrade firmware - Need to stop drinking =)
21072012 - Added GT-N7000B model support. Fixed Root method detection for ICS.
19072012 (initial version) - solved installation of adb drivers. Supports Gingerbread and ICS versions of Android.

Just another reservation...

download not working

drnarinder said:
download not working
Click to expand...
Click to collapse
Hi, thanks for the feedback. Would you plase post the result in here please and send me the link?
http://pastebin.com/
I have an idea of what might be failing but need to check it. Thanks again...
I have already modified the code. If the issue is what I am thinking, then it should be working now...report back..regards

download is ok now

So it's basically one tool for all directly rootable GB kernels ? No more checking the kernel and downloading proper package ? Not that it was such a difficult thing, but improvements like that are amazing Next time i need to root, im gonna definitely use this stuff.

drnarinder said:
download is ok now
Click to expand...
Click to collapse
Great, just let me know how it went. Dropbox has been having issues lately...Thanks for using the tool...:good:

Akiainavas said:
So it's basically one tool for all directly rootable GB kernels ? No more checking the kernel and downloading proper package ? Not that it was such a difficult thing, but improvements like that are amazing Next time i need to root, im gonna definitely use this stuff.
Click to expand...
Click to collapse
Actually, it supports all Android versions. Direct rootable are done directly with Doomlord's tool, but all the other versions needs the user to follow instructions. Take into consideration that GB 2.3.6 needs to be downgraded first. But the downgrade firmware and the correct cf kernel are all downloaded by the script, even Odin is included...you just need to press start and follow commands, the rest in done in here.
For ICS, the files needed are downloaded and sent to your sdcard / external_sd. The phone booted in stock recovery and from there on, you have to flash the files....not 100% but don't have to look for the files and the correct thread. All the instructions are in the screen...
Hope you can test it. Thanks for the support....:good:

Nice, will test this out!

john9 said:
Nice, will test this out!
Click to expand...
Click to collapse
Thanks... just report back to know how is it going! thanks for the support...

Is it same as DoomLord's and Chainfire's rooting method with edited .bat script ?

Yep..the files are already in the script...it also has ICS rooting method as in Dr. Ketan's thread...just one script to gather all methods
Sent from my GT-N7000 using xda app-developers app

From your sig you have the exact same phones I have! (Well I have the Desire HD)
Great work and I will check this out!

blud7 said:
From your sig you have the exact same phones I have! (Well I have the Desire HD)
Great work and I will check this out!
Click to expand...
Click to collapse
Thanks man...just report back when u do...It is a pity that we won't get ICS in the DHD...but the Note is awesome...:good:

apparantly my GT N7000 is not the international version and isnt supported. bummer

beefcake5799 said:
apparantly my GT N700 is not the international version and isnt supported. bummer
Click to expand...
Click to collapse
Is your device N7000 or N7000B? that is weird, I have tested many times with my HTC and my Note and works great.
Just a favor, would you send me the following info:
Plug your phone with usb debugging on
Open a cmd in the PC
Type: adb shell getvar all
Paste the outcome as code in here or send me a pastebin link
Just to check your model id...thanks for the feedback...

beefcake5799 said:
apparantly my GT N700 is not the international version and isnt supported. bummer
Click to expand...
Click to collapse
I have added GT-N7000B support. Would you please try it now and report back? If it is failing, would you please send me a copy of the cmd session?
Thanks for the support. :good:

glevitan said:
I have added GT-N7000B support. Would you please try it now and report back? If it is failing, would you please send me a copy of the cmd session?
Thanks for the support. :good:
Click to expand...
Click to collapse
Im probably doing something wrong

The problem is that adb drivers are failing to install..that is why is failing. Let me check it when I get home. Thanks
Sent from my GT-N7000 using xda app-developers app

[TOOL]Official Sony Flash Tool | MORE INFO | 06 December | SITCKY THREAD REQ

Hello guys! Sony has released a brand new flash tool for re-flashing stock firmwares to our Xperia devices. There's even no need to get ftf file with stock before, as the tool detects your device and downloads stock ROM for you.
Why I posted this here? To make developers' work easier and provide people simpler way to re-flash stock firmware. <---- STICKY THREAD REQUEST
What it exactly does:
Detects your device
Downloads the LATEST stock firmware for your device
Flashes the stock ROM
Requirements:
One of the supported devices
USB Cable
Unlocked device's bootloader (to unlock go HERE)
Supported devices:
Xperia arc S
Xperia arc
Xperia S
MORE SUPPORTED DEVICES SOON!
DOWNLOAD HERE!
OFFICIAL SONY ARTICLE
Here's how does the new tool work:
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE!
This thread isn't "thanks" producer and I didn't post it in development section by mistake. All the reasons are in the second para.
All credits go to Sony as it's not my work, I just gave it to you closer.

Its just beta i guess isnt it ?
Read on fb tfs

cannot relock again:crying:

Why do you wanna lock it again?
Sent from my Xperia Arc S using xda premium

stupid question: but for re-have DRM rights officially when I use this software?
Not expected a procedure to get them back officially form Sony?

MK_II said:
cannot relock again:crying:
Click to expand...
Click to collapse
Of course you can. Not with this tool but generally it is possible
kingserpent said:
Why do you wanna lock it again?
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
To get everything back stock in case something
DomusX10 said:
stupid question: but for re-have DRM rights officially when I use this software?
Not expected a procedure to get them back officially form Sony?
Click to expand...
Click to collapse
I dunno what you mean. Pls, more details what do you want to do
justkiddinghere said:
Its just beta i guess isnt it ?
Read on fb tfs
Click to expand...
Click to collapse
Yes beta but it works well
Sent from best smartphone in the world - HTC One X with Liquid Smooth JB

maxio1998 said:
I dunno what you mean. Pls, more details what do you want to do
[/b]
Click to expand...
Click to collapse
I mean if Sony make it possible to recover even if the DRM rights, when you do this procedure to return to the stock rom ... if in future releases of this program, could introduce this.
I guess that's the right idea.

DomusX10 said:
I mean if Sony make it possible to recover even if the DRM rights, when you do this procedure to return to the stock rom ... if in future releases of this program, could introduce this.
I guess that's the right idea.
Click to expand...
Click to collapse
OK... Yup, it's great idea.

More info added to thread

http://forum.xda-developers.com/showthread.php?p=35096528#post35096528 (OP)

did this flash tool support linux ?
or will support in the future

Easy way to downgrade...
I should have read the instructions more carefully before using this tool. I have been unable to upgrade my Arc S ever since I unlocked it and thought this was a simple solution. Unfortunately I didn't read the details before I pressed the button. The string 4.0.2.A.62 is the build number, not the Android version. Now I downgraded to 2.3.4
What it exactly does:
Detects your device
Downloads the LATEST stock firmware for your device
Flashes the stock ROM
Click to expand...
Click to collapse
Latest seems to be a bit off in this first version...

sony ericson emma link, as i can se all forgot abot this

Well,now this will most definitely be handy for those new members with unlocked bootloaders and a quick fix to getting device working again if they are in trouble i. e. hung or bootloops etc.etc...
No more crying messages.
(Really gets on my nerve.Because its always stated beforehand about the risk if something goes wrong,they never read this or pretend not to understand)
Its a good customer support act by SONY.
So,they have not given upgrades to 2011 devices.But,maybe now,after seeing all the threads here something might change.
By the way,would this tool in anyway hinder existing flashtool by bin4ry/androxyde in any way?
Just curious.
Thank you SONY.
Sent from my Xperia Arc using xda app-developers app

sandroidnz01 said:
Well,now this will most definitely be handy for those new members with unlocked bootloaders and a quick fix to getting device working again if they are in trouble i. e. hung or bootloops etc.etc...
No more crying messages.
(Really gets on my nerve.Because its always stated beforehand about the risk if something goes wrong,they never read this or pretend not to understand)
Its a good customer support act by SONY.
So,they have not given upgrades to 2011 devices.But,maybe now,after seeing all the threads here something might change.
By the way,would this tool in anyway hinder existing flashtool by bin4ry/androxyde in any way?
Just curious.
Thank you SONY.
Sent from my Xperia Arc using xda app-developers app
Click to expand...
Click to collapse
i was talking to sony and they tell they working on update

what is the maximum time to get user and password

chauhanjayc said:
what is the maximum time to get user and password
Click to expand...
Click to collapse
+1 i request its this afternoom but i not received them email

yanner2012 said:
+1 i request its this afternoom but i not received them email
Click to expand...
Click to collapse
i cant eaven register

no need to have id pass word
follow below steps
To install the flash tool, follow the steps below:
Download the Flash tool for Xperia devices.
Unzip the file you downloaded and place it somewhere on your computer.
In the unzipped folder, run Emma.exe. During the installation, make sure you remember the installation path:
Default path in Windows 64 bit is: “C:\Program Files (x86)\Sony Mobile\Emma\”
Default path in Windows 32 bit is: “C:\Program Files\Sony Mobile\Emma\”
Copy the Customization.ini file. You find it in the <Emma zip filename>.
Paste the Customization.ini file into the installation folder. The installation folder is the folder named Emma in the installation path examples on point 3.1 and 3.2 above.
Click Start > All programs > Sony Mobile > Emma (if you used the default installation path from step 3 above) to start the flash tool

chauhanjayc said:
no need to have id pass word
follow below steps
To install the flash tool, follow the steps below:
Download the Flash tool for Xperia devices.
Unzip the file you downloaded and place it somewhere on your computer.
In the unzipped folder, run Emma.exe. During the installation, make sure you remember the installation path:
Default path in Windows 64 bit is: “C:\Program Files (x86)\Sony Mobile\Emma\”
Default path in Windows 32 bit is: “C:\Program Files\Sony Mobile\Emma\”
Copy the Customization.ini file. You find it in the <Emma zip filename>.
Paste the Customization.ini file into the installation folder. The installation folder is the folder named Emma in the installation path examples on point 3.1 and 3.2 above.
Click Start > All programs > Sony Mobile > Emma (if you used the default installation path from step 3 above) to start the flash tool
Click to expand...
Click to collapse
Thank you thats the way that works but i dont know...
if i try to unlock with flash tool it says your phone is unlocked and no need for that and when i try this EMMA it says your phone is locked now i dont know where is the truth???
Strange...

Simple Root for Unlocked Bootloaders (SGP311/312)

It was clear that rooting some Sony devices was not as easy as it should be. This is for unlocked bootloader users, who want to quickly root a stock ROM by flashing a rooted boot.img. It is for the POLLUX_WINDY (ie. the SGP311/312) devices ONLY.
Do not install this on the Pollux (tablet Z with LTE), or it will no longer boot - use flashtool to fix it
There may have been some in the past, but these tend to be full of other "tweaks", like hideous amateur boot logos, and stupid changes like setting ro.secure=0. That's a bad idea, it can break things, and frankly, I know from experience of myself and others that there is a need for a FAST way to root your unlocked device after flashing a new ROM, rather than messing around with downgrading and OTAs.
This will NOT work on locked bootloader, but this is not intended for them. This doesn't include 9001 different recoveries either, like some "kernels" do. This is the stock kernel, with root added, and nothing stupid added.
There is one security improvement made - ro.adb.secure has been set to 1. This is an important security feature, please don't complain about it. If you don't use ADB, you'll never see it, and it won't change anything. If you use adb, it will offer you greater security on 4.2+ stock Sony ROMs, which don't have this feature enabled. You will be prompted to accept the computer connection on the phone, just like in "AOSP" Android 4.2 and above.
The downloads are available above, in the "Downloads" tab. If you have a particular version you wish to request, simply post the kernel.sin. I have made this for only the SGP311/312 (Pollux_Windy) Tablet Z phone images right now, but will consider expanding it for other devices if there is demand and people who can test.
Enjoy simple root, without the nonsense. None of the "don't mirror my files" crap. None of the "please give me donations", none of the "omg credit me as the best person ever". Feel free to share, use, re-use, mirror, enjoy. And I think you'll find that these files are rather helpful for the unlocked bootloader root community I've been thinking about making them for months, but it seems that nobody has ever bothered to.
Click here to download
XDA:DevDB Information
Simple Root for Unlocked Bootloaders (SGP311/312), a Tool/Utility for the Sony Xperia Tablet Z
Contributors
pulser_g2, Chainfire
Version Information
Status: Stable
Current Stable Version: 3.1.C.0.136
Stable Release Date: 2013-09-14
Created 2013-09-14
Last Updated 2013-09-14

Hi, do you mean this root method doesn't work for the Tablet Z Lte model? Is there any way to get a method which can root the Lte version ? Thanks !

Omg @pulser_g2 you is best person ever... But seriously thanks man
Sent from my SGP312 using XDA Premium 4 mobile app

epcwong said:
Hi, do you mean this root method doesn't work for the Tablet Z Lte model? Is there any way to get a method which can root the Lte version ? Thanks !
Click to expand...
Click to collapse
Correct.
But, since I feel generous, if you upload me the kernel.sin file from your LTE model, I will make a rooted boot.img for it. You can attach them to a post here if you like - just the kernel.sin. Please name them per the stock ROM version, so I can label it correctly.

pulser_g2 said:
Correct.
But, since I feel generous, if you upload me the kernel.sin file from your LTE model, I will make a rooted boot.img for it. You can attach them to a post here if you like - just the kernel.sin. Please name them per the stock ROM version, so I can label it correctly.
Click to expand...
Click to collapse
Hi there, thanks for your reply. What do you mean by the kernel.sin file from my LTE model (mine is the HK version) ? I have taken a photo shot regarding my pad's rom and kernel version details for your reference as attached. If there is not the information that you need, please tell me how to get the "kernel.sin" file from my pad ! Thanks again for your kindness !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pulser_g2 said:
Correct.
But, since I feel generous, if you upload me the kernel.sin file from your LTE model, I will make a rooted boot.img for it. You can attach them to a post here if you like - just the kernel.sin. Please name them per the stock ROM version, so I can label it correctly.
Click to expand...
Click to collapse
i will upload the kernel.sin from the FTFs
is that okay for you?

Yes, thank you so much ! I'll appreciate that !

@pulser_g2
Here ya go
kernel.sin from 4.2.2 FTF
Google Drive

Thank you so much !!!

epcwong said:
Hi there, thanks for your reply. What do you mean by the kernel.sin file from my LTE model (mine is the HK version) ? I have taken a photo shot regarding my pad's rom and kernel version details for your reference as attached. If there is not the information that you need, please tell me how to get the "kernel.sin" file from my pad ! Thanks again for your kindness !
View attachment 2292738
Click to expand...
Click to collapse
Hi, here attached with the kernel.sin file for you. The Rom version is 10.3.1A.0.244. Thank you so much for your kindly attention for this matter !
---------- Post added at 01:10 PM ---------- Previous post was at 01:03 PM ----------
Sorry I can't upload the kernel.sin file becuase it was said " invalid file ", Sorry about this !
---------- Post added at 01:15 PM ---------- Previous post was at 01:10 PM ----------
Sorry I can't upload the kernel.sin file becuase it was said " invalid file ", Sorry about this !

Sgp311 4.2.2
Will this work on 16gb Wi-fi model SGP311 with android 4.2.2?

chiobesek said:
Will this work on 16gb Wi-fi model SGP311 with android 4.2.2?
Click to expand...
Click to collapse
If the file in the downloads list matches the version you are running (per about screen), then yes it will.

MightyBear007 said:
@pulser_g2
Here ya go
kernel.sin from 4.2.2 FTF
Google Drive
Click to expand...
Click to collapse
The attachment is rooted for this version. As you didn't give me the firmware version (ie. 10.A..whatever...), I won't add it to the list. Please test and let me know if it works. If this fails, just re-flash kernel using flashtool.

pulser_g2 said:
The attachment is rooted for this version. As you didn't give me the firmware version (ie. 10.A..whatever...), I won't add it to the list. Please test and let me know if it works. If this fails, just re-flash kernel using flashtool.
Click to expand...
Click to collapse
You just did a ro.secure in the ramdisk
Am I right?

MightyBear007 said:
You just did a ro.secure in the ramdisk
Am I right?
Click to expand...
Click to collapse
Nope. Setting ro.secure=0 is NOT the right way to root.
The ramdisk is modified, it will detect if you have root already, and if not, it will install SuperSU and the corresponding su binary on root. I also set ro.adb.secure=1, to add extra security for the device (now you need to approve ADB connections to unrecognised computers).
If you use ro.secure=0, this will break many apps with "root detection", as well as being a horrendously ugly hack, which introduces all sorts of vulnerabilities. ro.secure should always be set to 1
I strongly advise you don't use root methods that set ro.secure=0, as well as any kernels that do it. It's much safer to not have a rooted ADB shell lying available to anything that connects to your device... Including... you know... an app running on your device that initiated an adb connection to 127.0.0.1
So yes, this gives you root without adding stupid extra security holes like many kernels and "root methods" do

pulser_g2 said:
Nope. Setting ro.secure=0 is NOT the right way to root.
The ramdisk is modified, it will detect if you have root already, and if not, it will install SuperSU and the corresponding su binary on root. I also set ro.adb.secure=1, to add extra security for the device (now you need to approve ADB connections to unrecognised computers).
If you use ro.secure=0, this will break many apps with "root detection", as well as being a horrendously ugly hack, which introduces all sorts of vulnerabilities. ro.secure should always be set to 1
I strongly advise you don't use root methods that set ro.secure=0, as well as any kernels that do it. It's much safer to not have a rooted ADB shell lying available to anything that connects to your device... Including... you know... an app running on your device that initiated an adb connection to 127.0.0.1
So yes, this gives you root without adding stupid extra security holes like many kernels and "root methods" do
Click to expand...
Click to collapse
Nice Information
Thank you So much for replying!
I have to change all my kernels ram disk to 1
Sent from my C6902 using XDA Premium 4 mobile app

so i am right ?
Download the file rooted-SGP311_10.3.1.C.0.136-boot.img, unlock the bootloader of my tablet Z with android 4.2 (16gb wifi only running 10.3.1.C.0.136) at the moment, go for fastboot, do fastboot flash boot filename.img and i will be rooted with nothing else changed ?
just want to the root for ad free android, but stay with the stock system
thank u

Havoc2k said:
so i am right ?
Download the file rooted-SGP311_10.3.1.C.0.136-boot.img, unlock the bootloader of my tablet Z with android 4.2 (16gb wifi only running 10.3.1.C.0.136) at the moment, go for fastboot, do fastboot flash boot filename.img and i will be rooted with nothing else changed ?
just want to the root for ad free android, but stay with the stock system
thank u
Click to expand...
Click to collapse
Instead of going through all the trouble of unlocking the boot loader and flashing an image, use the Vroot tool instead; it works fast and and does not require unlocking the boot loader. Search this forum for information about the Vroot tool.

[ROM][UB/LB][4.4.4][.283][Pre-Rooted] Xperia Z (C6603) 10.5.1.A.0.283 Generic

Hi Friends,
This is pre-rooted flashable stock ROM created from the FTF file http://forum.xda-developers.com/showthread.php?t=2872440 with @zxz0O0 's PRFCreator tool http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
Features:
1. Based on stock ROM 10.5.1.A.0.283 Generic SG version
2. Pre-rooted
3. Latest SuperSU and dualrecovery are included
All I did is just download the firmware, create FTF file and then use PRFCreator tool to create this flashable ROM, apart from that I didn't touch anything in this ROM.
Information:
I compared with other stock version from other country, difference are in useless application, such as:
1. France version has one Diagnostics tool but this does not have
2. The 4G icon is 4G in Franch version, but this is LTE
3. The options for Mobile Mode is different, this version has 4 options (WCDMAonly+GSM only+WCDMA/GSM+LTE/WCDMA/GSM), and France version only have 3 options (4G/3G/2G+3G only+3G/2G)
NOTE: Unlocked bootloader works. I did not tested on locked bootloader, but someone tested it on locked bootloader
Installation:
1. Download this ROM and transfer to you Xperia Z
2. Reboot into your recovery and do clean (clean cache, data, system) installation
3. (Should not needed) In case you lost recovery after flash this ROM, just enable debugging and then on Windows/Linux use NUT's recovery installer (XZ-lockeddualrecovery-<version>.installer.zip) to install recovery.
Screenshoot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
MEGA
GoogleDrive
If you like it, don't forget press "Thanks" button

Xperia z? Waooo

unfortunately seems have the same issue on all 4.4 stock based rom:
http://forum.xda-developers.com/xperia-z/help/earphone-calls-t2840012

numero13 said:
unfortunately seems have the same issue on all 4.4 stock based rom:
http://forum.xda-developers.com/xperia-z/help/earphone-calls-t2840012
Click to expand...
Click to collapse
I installed the rom and test call and work perflectly

is someone have try this rom for locked bootloader? i need some review? so there is app to sd card on setting or not... Thanks mate
Sent from my C6603 using XDA Premium 4 mobile app

ROMs created with PRFCreator should work on locked bootloader without any problems

I can't boot to recovery. Anyone else having this problem?
EDIT:
It seems that XZDualRecovery files are absent from /system/bin

Deodexed?

NoeVermilion said:
is someone have try this rom for locked bootloader? i need some review? so there is app to sd card on setting or not... Thanks mate
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i just tested this. flashed over a locked bootloader
and it works. booted up.
BE2 works as well.
-------------------
EDIT: apparently there's an image bug (nothing major) on the caller picture during a phone call (they have lines with the images)
so it was not clear.
EDIT2: seems like this bug only exists IF the user chooses to manually crop a photo through the album.
if it was sync-ed/edited with google accounts, the lines are gone.
(tested it by changing photos of one of my contacts with 2 different photos and then reverted back, no lines)
EDIT3: for the sdcard transfer, i was able to fix it via this link: http://forum.xda-developers.com/xperia-z/general/fix-t2759826
(this fix is system level and not 3rd party apps via play store)
i was able to transfer files IN & OUT via wifi file transfer with this fix.
just follow the instructions
not sure if this is an issue on all 4.4.4
zakitheracer said:
Deodexed?
Click to expand...
Click to collapse
nope. odexed.

Can someone make a mirror on Gdrive? Just hate mega cause its so slow even on Lte. Others work well.
Sorry for my bad english
Sent from my C6603 using XDA Free mobile app

leongzxc said:
i just tested this. flashed over a locked bootloader
EDIT3: for the sdcard transfer, i was able to fix it via this link: http://forum.xda-developers.com/xperia-z/general/fix-t2759826
(this fix is system level and not 3rd party apps via play store)
i was able to transfer files IN & OUT via wifi file transfer with this fix.
just follow the instructions
not sure if this is an issue on all 4.4.4
Click to expand...
Click to collapse
Was also a problem with the non-prepared stock ROM(s) of 4.4.2, have had to implement that fix before :silly:
Also, it appears you lose Recovery when installing this one (since it's not included in the ROM I guess?)
Otherwise works like a charm here up until now! (Unlocked Bootloader)

kayrowl91 said:
Can someone make a mirror on Gdrive? Just hate mega cause its so slow even on Lte. Others work well.
Sorry for my bad english
Sent from my C6603 using XDA Free mobile app
Click to expand...
Click to collapse
Add Google Drive download link

DFKT said:
Was also a problem with the non-prepared stock ROM(s) of 4.4.2, have had to implement that fix before :silly:
Also, it appears you lose Recovery when installing this one (since it's not included in the ROM I guess?)
Otherwise works like a charm here up until now! (Unlocked Bootloader)
Click to expand...
Click to collapse
The Recovery XZ-lockeddualrecovery2.7.154-BETA is already included in this ROM.
By default, volume down is TWR and Volume up is Philz recovery.

Hi,
I have KMA ROM with its kernel and i just install this ROM but when flashing i have a error
Launching SuperSU and DualRecovery zip
E:Error in /storage/....
(Status 0)
Installation aborded.
Why?

Work fine thanks
---------- Post added at 04:39 AM ---------- Previous post was at 04:37 AM ----------
hadramos said:
Hi,
I have KMA ROM with its kernel and i just install this ROM but when flashing i have a error
Launching SuperSU and DualRecovery zip
E:Error in /storage/....
(Status 0)
Installation aborded.
Why?
Click to expand...
Click to collapse
Wipe data cache and system?

DFKT said:
Was also a problem with the non-prepared stock ROM(s) of 4.4.2, have had to implement that fix before :silly:
Also, it appears you lose Recovery when installing this one (since it's not included in the ROM I guess?)
Otherwise works like a charm here up until now! (Unlocked Bootloader)
Click to expand...
Click to collapse
yeap. the sdcard fix was needed as its an important fix.
luckily there are files for us to do a self-fix.
luala said:
The Recovery XZ-lockeddualrecovery2.7.154-BETA is already included in this ROM.
By default, volume down is TWR and Volume up is Philz recovery.
Click to expand...
Click to collapse
its weird because your rom is not the first stock rom that has lost its recovery by not being able to access through the volume buttons upon boot
BUT it can be accessed through NDRUtils app from play store.
but i am able to fix it by reinstalling a dual recovery version and i was able to access recovery via volume buttons.
so no worries there as it can be overwritten even by older versions (i prefer 2.6.3 as its a stable one)

comax70 said:
Work fine thanks
---------- Post added at 04:39 AM ---------- Previous post was at 04:37 AM ----------
Wipe data cache and system?
Click to expand...
Click to collapse
Yes full wipe data and cache...
I have a kernel 4.4.4 with KMA rom.
It's Bad ?

Works on LB Thx for the post

@luala
maybe you can consider to change your title that LB works as well

leongzxc said:
yeap. the sdcard fix was needed as its an important fix.
luckily there are files for us to do a self-fix.
its weird because your rom is not the first stock rom that has lost its recovery by not being able to access through the volume buttons upon boot
BUT it can be accessed through NDRUtils app from play store.
but i am able to fix it by reinstalling a dual recovery version and i was able to access recovery via volume buttons.
so no worries there as it can be overwritten even by older versions (i prefer 2.6.3 as its a stable one)
Click to expand...
Click to collapse
Lol, completely screwed my system up by trying to do it by hand, then flashing wrong firmware to fix problem, etc.
Now, after half a nights work last night, finally up and running again [emoji12]
On another subject: another thing that seems to have improved, for me at least is the GSM signal strength! Had hardly no signal with 4.4.2 in the subway here in rotterdam (NL), but now signal seems almost twice as strong!

[Root/Recovery] SGP321/311/3xx [FTF] 10.5.1.A.0.283 (Stock 4.4.4) (no Wipe needed)

Requirements:
1. A litte Knowledge about flashing / USB debugging / rooting ...
2. Flashtool 0.9.18.2 +
3. USB debugging enabled ( not matter if Stock/CM11/Pac/... on your Tab)
3. Time (without Downloads ~ 20min.)
Click to expand...
Click to collapse
I do all Firmware downloads with the build in function from Flashtool !
Below is a Youtube Video that show all the Steps here. (without Steps XX.a for Rootk1t Kernels files)
Please, read the instructions exactly and flash, i will not responsible for any Brick/failures/data loss on your Tablet.
Do this only if you know what you are doing, you void your warranty!
How to Root with full Wipe: (without Wipe see the Screenshot below)
1. Start Flashtool
2. Go to Devices > Check Updates > SGP3XX
3. Go to Tab SGP321 or SGP311
4. Right Click on a Branding you chose and Check release (look for Version 10.5.1.A.0.283)
5. Right Click again and Download it.
6. Wait until Decryption finished.
7. A Window pops up -> In folder list mark all and Click the -> Button then Create
8. Wait until Bundle creation finished.
9. Now Check a release in the List with Version 10.5.A.0.230 - or
9a. use Rootk1t SGP321 Kernel file form here and Jump to Step 14
10. Right Click again and Download it.
11. Wait until Decryption finished.
12. A Window pops up -> In folder list mark ONLY fotakernel_... and kernel_... and Click the -> Button then Create
13. Wait until Bundle creation finished and Close Device Update Checker.
14. Connect your Tab with USB Debugging enabled.
15. Click on Flash Device.
16. Chose Flashmode and the Firmware Version 10.5.1.A.0.283 you downloaded before.
17. Click on Flash without changing something.
18. Disconnect and Reboot your Tab and skip the Welcome Setup to enable USB Debugging.
19. Connect your Tab and click on Flash Device.
20. Chose Flashmode and the Firmware Version 10.5.A.0.230 you downloaded before, or
20a. use Rootk1t SGP321 Kernel file form here
21. Click on Flash without changing something.
22. Disconnect and Reboot your Tab and skip the Welcome Setup.
23. Connect your Tab and click My SGP3XX > Root > Force towelroot.
24. Chose SuperSu (or maybe Superuser)
25. Click Make it ra1n button on your Tab and wait until the Tab reboots.
26. After reboot click on Flash Device.
27. Chose Flashmode and the Firmware Version 10.5.1.A.0.283 you downloaded before, - or
27a. use Rootk1t SGP321 Kernel file form here and Jump to Step 29
28. Now Exclude all but not KERNEL and FOTA .
29. Click on Flash.
30. After reboot your Tab is rooted :good:
Click to expand...
Click to collapse
How to Root without Wipe:
The same steps but,
just disable Wipe Boxes ... every time there enabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Test on my Tab and work :good:
Click to expand...
Click to collapse
Recovery flash :
After your Tab have ROOT just go to :
http://nut.xperia-files.com/
Download TabZ-lockeddualrecovery2.x.x.x -BETA.installer.zip to your PC
unzip and run the install.bat (Windows) or install.sh (Linux).
Chose Superuser or SuperSU (in my case SuperSU)
Click to expand...
Click to collapse
Here my "Video-tutorial" to do that. ( or from Tomsgt below )
But .....
You see only the Screen on my PC
No Sound
Full Process length no cuts but you can -> jump forward
Without Downloads it takes about .... 20min.
In my case a Full Wipe.
https://www.youtube.com/watch?v=tvAPHAN2Ots
If you find a fault in this Steps, tell me please.
Big Thanks to :
dr_derqami said:
Its working on 311 thank you.(with different files of course)
Click to expand...
Click to collapse
Rootk1t said:
Instead of downloading full firmware and excluding unnecessary parts, you can flash just kernels.
Kernel 10.5.1.A.0.283 for SGP321.
Kernel 10.5.A.0.230 for SGP321.
Kernel 10.5.1.A.0.283 for SGP311.
Kernel 10.5.A.0.230 for SGP311.
Kernel 10.5.1.A.0.283 for SGP312.
Kernel 10.5.A.0.230 for SGP312.
Click to expand...
Click to collapse
Tomsgt said:
Hey I made this video on the root process you do in this thread you can add it to the OP if you think it will help others figure this out
How to Root the Sony Xperia Tablet Z on Android 4 4 4 Kitkat
Click to expand...
Click to collapse
I hope this Steps helps someone to Root and maybe it works on SGP3xx ....

Will this work in SGP311?

Maybe, I don't know, but it should be logical. You can try it, on your risk.

I can confirm this works flawlessly on my pollux sgp321.
Just did it myself. I had no idea official was now on 4.4.4!
Thanks a lot for the guide.

Instead of downloading full firmware and excluding unnecessary parts, you can flash just kernels.
Kernel 10.5.1.A.0.283 for SGP321.
Kernel 10.5.A.0.230 for SGP321.
Kernel 10.5.1.A.0.283 for SGP311.
Kernel 10.5.A.0.230 for SGP311.
Kernel 10.5.1.A.0.283 for SGP312.
Kernel 10.5.A.0.230 for SGP312.

Rootk1t said:
Instead of downloading full firmware and excluding unnecessary parts, you can flash just kernels.
Kernel 10.5.1.A.0.283 for SGP321.
Kernel 10.5.A.0.230 for SGP321.
Click to expand...
Click to collapse
Thanks :good:
This 2 Kernels will only work on SGP321 !?

keil. said:
Thanks :good:
This 2 Kernels will only work on SGP321 !?
Click to expand...
Click to collapse
yep! Only SGP321. UPDATED: Made for others too.

hi
will the step by step guide be updated now that the various kernels are available, gettibng rid of the unecessay steps?
i`m a bit of a noob in flashing xperia stuff even if i manged to get my 4.3 rooted (with the long methods not easy/towel root)
thanks for any eply

How to skip the Welcome Setup to enable USB Debugging.
Thanks..

i was with a 230 rooted, i not remember the tutorial i does, can i start with a specific point?
thanks

i installed 283, after the kernel 230 and now i try to find where is
"Conect la Tab y haz clic en Mi SGP3XX> Root> Towelroot. " to continue,any help?

Rootk1t said:
Instead of downloading full firmware and excluding unnecessary parts, you can flash just kernels.
Kernel 10.5.1.A.0.283 for SGP321.
Kernel 10.5.A.0.230 for SGP321.
Kernel 10.5.1.A.0.283 for SGP311.
Kernel 10.5.A.0.230 for SGP311.
Kernel 10.5.1.A.0.283 for SGP312.
Kernel 10.5.A.0.230 for SGP312.
Click to expand...
Click to collapse
This is what i really hate.. no instructions .
at least tell us dude how to use it..i flash .230 kernel (your link ) then .283 ( your link ) .. the wifi not working .. the android version is also 4.4.2 .. please dude..give more detailed..help the community !

Quote:
Originally Posted by pairach
How to skip the Welcome Setup to enable USB Debugging.
Thanks..
Just press NEXT until finished. You don´t need to setup anything for this.
Quote:
Originally Posted by john_smith
i installed 283, after the kernel 230 and now i try to find where is
"Conect la Tab y haz clic en Mi SGP3XX> Root> Towelroot. " to continue,any help?
Here the Link to my Youtube Clip start at 15min. Follow my Mouse pointer. Its in Flashtool´s Menu bar.
http://youtu.be/tvAPHAN2Ots?t=15m10s

Isn't there a way to root without wiping the device?
If so, how?

ZaInT_ said:
Isn't there a way to root without wiping the device?
If so, how?
Click to expand...
Click to collapse
I´m sure there is a way to Root without wiping the device,
but for today, i have no time to make some test .... sorry.
maybe tomorrow.

i have successfully rooted Xperia Tablet Z with kernel change, now i cannot install dual recovery. whats the method of installing recovery for kitkat 4.4.4

ashahzadpk said:
i have successfully rooted Xperia Tablet Z with kernel change, now i cannot install dual recovery. whats the method of installing recovery for kitkat 4.4.4
Click to expand...
Click to collapse
Maybe Tomorrow
Or next Week

i have successfully installed dual recovery by first installing superuser then XZDualRecovery 2.7.1XX RC .bat and selected Option 2 for superuser and Bingo everything is fine now.

edit: delete

Update 1 Post :
Add Recovery flash
@ZaInT_
There´s a option in flashtool to set or not set a wipe.
I will test this tomorrow.
Click to expand...
Click to collapse