[Q] HELP! Atrix HD Stuck in CM 10 Boot Animation - Motorola Atrix HD

I just tried to install CM 10.1.3 on my Motorola Atrix HD.
I forgot to wipe data and cache before installing the ROM, and now it is stuck in the boot animation.
When I press the power and volume keys down together, it takes my phone to a black screen, and when I press them again on the black screen it gives me a brief menu that says
"Normal power up"
"Recovery"
"AP Fastboot"
"Factory"
and another one I can't recall.
This screen times out in about 3 seconds. and regardless of which item from the menu I select, it still shows my boot logo, then the CM animation. I cant boot into fastboot or recovery, and I can't find anything good online to help me.
Help! What do I do?

Hi. There's a catch about the bootloader mode (the menu you're describing). You have to press vol down to scroll down to Recovery, and then press vol up to select it. Pretty dumb IMO but that's how it is.
If you're completely sure you can't get to recovery using this method, you could try going into download mode and factory reset through fastboot:
Here's the guide to get fastboot working:
http://forum.xda-developers.com/showthread.php?t=2226527
To go into download mode, shut down the phone completely, hold down the power button and volume down buttons. Then let go of the power button while still holding down the volume button and it should boot to fastboot (download) mode. The connect usb cable to your pc.
You can do a factory reset (format data and cache partitions) using fastboot -w.
Btw, is there any particular reason for going CM10? CM11 is just so much better now, nightlies are pretty good (12/20 has been rock solid for me, even with ART enabled).
Good luck!

Related

Can't go into fastboot mode. Please help!

Hello. I have a razr I and decided to unlock the bootloader. I tried the button combination power + volume down several times, but the phone just powers up normally (actually rhe screen flashes for a second, but doesn't go into fastboot mode. I trided using adb reboot fastboot but the device just reboots. What can I do about it?
NVM, just did it by fastboot reboot bootloader...
Ok, one more thing. It seems my device ignores the key combo, but I was still able to get into fastboot mode by using adb. However, I have tried to flash a custom recovery with no success.
I tred using the supplied installer and after rebooting I get to the open robot screen with the red exclamation mark. Then, after holding some keys (not sure if power or power + volume down I get into recovery, but it's still the stock android recovery. Then I tried flashing the recovery image from fastboot mode. It sait the recovery was flashed, but still cannot boot into recovery. What's wrong with my phone?
axlastro said:
Hello. I have a razr I and decided to unlock the bootloader. I tried the button combination power + volume down several times, but the phone just powers up normally (actually rhe screen flashes for a second, but doesn't go into fastboot mode. I trided using adb reboot fastboot but the device just reboots. What can I do about it?
NVM, just did it by fastboot reboot bootloader...
Click to expand...
Click to collapse
Just incase you need to do it in the future:
Hold volume down, then hold the power button. When it begins to vibrate release the power button and keep the volume down button pressed until you get into fastboot.
AGISCI said:
Just incase you need to do it in the future:
Hold volume down, then hold the power button. When it begins to vibrate release the power button and keep the volume down button pressed until you get into fastboot.
Click to expand...
Click to collapse
Alright. So how about the never appearing CWM recovery?

45 minutes still no boot.

Wiped data cache AND dalvik, flashed to Malladus, installed GApps and LGApps at the same time. Been sitting at the android animation for at least 45 minutes all three times and still wont boot. I'm downloading stock image but was hoping someone had an experience similar and had an easy solution?
briangp said:
Wiped data cache AND dalvik, flashed to Malladus, installed GApps and LGApps at the same time. Been sitting at the android animation for at least 45 minutes all three times and still wont boot. I'm downloading stock image but was hoping someone had an experience similar and had an easy solution?
Click to expand...
Click to collapse
And now I offically think my phone is screwed. I cant boot into recovery, every time I try it wont enter and just reboots because I'm holding the power and volume down buttons. So far I don't think I can enter download mode either.
briangp said:
And now I offically think my phone is screwed. I cant boot into recovery, every time I try it wont enter and just reboots because I'm holding the power and volume down buttons. So far I don't think I can enter download mode either.
Click to expand...
Click to collapse
How to get into TWRP with hardware keys on G2
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
From this thread: http://forum.xda-developers.com/showthread.php?t=2534981
acejavelin said:
How to get into TWRP with hardware keys on G2
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
From this thread: http://forum.xda-developers.com/showthread.php?t=2534981
Click to expand...
Click to collapse
Thanks for replying. I've read how to get into the recovery menu many times. Something is wrong with my phone that prevents me from doing it. I'm assuming its hardware related. I was almost ready to give up yesterday when I found out that if I do the key combo while plugging it into USB, it enters the menu normally. At that point I was able to restore my backup and start again.
I think my phone has a fluke, but I've figured out a way around it.
For those who are using Malladus on Verizon, something was wrong with the radios in the set. I had to find a seperate KK baseband file for the VS980 and flash it over top of the ROM to get it to work. I'm not saying its the same results for everyone, but I tried every variant of his directions (just in case) and was unable to get LTE online. It was the seperate BB file later on that fixed it.

[Q] Startup Problem

My Motorola Atrix Hd won't boot up every time I turn the phone on the m logo shows up then goes to the recovery screen that have a red triangle their and stay their for a wild then goes back to the m logo how do i fix the problem
If it keeps going to recovery, you could try wiping cache and Dalvik to see of that happens. If this doesn't help, you may need to wipe the data partition too. If that doesn't help, you may have to re-flash the stock ROM.
audit13 said:
If it keeps going to recovery, you could try wiping cache and Dalvik to see of that happens. If this doesn't help, you may need to wipe the data partition too. If that doesn't help, you may have to re-flash the stock ROM.
Click to expand...
Click to collapse
how do i wipe the data partition
When you boot your phone, it goes right to the dead android all the time? If it does, that is recovery mode. I think you press the volume up key, select the option to wipe data, and reboot.
Special boot modes
Recovery: Hold Volume Down & Power simultaneously.
Bootloader: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
Fastboot: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
audit13 said:
When you boot your phone, it goes right to the dead android all the time? If it does, that is recovery mode. I think you press the volume up key, select the option to wipe data, and reboot.
Special boot modes
Recovery: Hold Volume Down & Power simultaneously.
Bootloader: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
Fastboot: Hold Volume Up Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to bootloader and then use Volume Up to select.
Click to expand...
Click to collapse
i did that but the phone is still doing the same thing
What ROM was your phone running? Does it have an unlocked bootloader? Did this happen after you did something to the ROM?
I am also have startup problems.
I manually restarted my phone and it fell into a black screen. No logo motorola. I made ​​all [power + volume (+, -)] => My phone booted into normal.
The cause of this problem?
Since I have a problem I did not start that way anymore: Power -> Reboot
Instead I just power off.
audit13 said:
What ROM was your phone running? Does it have an unlocked bootloader? Did this happen after you did something to the ROM?
Click to expand...
Click to collapse
i wasn't using a rom i was actually trying to install one, and the bootloader is locked
Try flashing a rom using rsd lite.

Factory APK mode - What is it?

I just tried to access fastboot on my fire and pushed the wrong button.
When holding "Volume Up" while switching the device on, it shows "Factory APK mode..." on the screen. After releasing the button the message disappears after 2 seconds and the fire boots up normal.
Nothing has happend, it works normal and all apps still work the way they did before.
So what does that mode do?
ChrBeck said:
I just tried to access fastboot on my fire and pushed the wrong button.
When holding "Volume Up" while switching the device on, it shows "Factory APK mode..." on the screen. After releasing the button the message disappears after 2 seconds and the fire boots up normal.
Nothing has happend, it works normal and all apps still work the way they did before.
So what does that mode do?
Click to expand...
Click to collapse
Likely just safe mode, only stock apps load, when in safe mode.
Used to boot device if a non stock app is causing device to be unusable.
But why do play store and so on still work when booting into that mode?
It just displays the message while booting, but nothing changes when up and running.
5.0.0 or 5.0.1 ? mine boots on fastboot mode
5.0.1, I can take a picture of it later today, didn't know there might be a difference in the versions.
I can only get fastboot ... Are you able to do this reliably? I've tried different hold an release and timings but can get it to happen.
Sorry for the late reply.
I tried to take a photo of it displaying the mode, but my phone couldn't produce a good one, so I finally took a short video. Focus is bad but you can sometimes read it.
I can repeat the process every time: Power down, hold volume up key, power on -> factory APK mode.
Hope that helps you.
Can nobody proove this works?
I mean I can't be the only one with that mode and I'm still wondering what it does.
stays now in fastbootmode - help
Tried that, now it is showing fastbootmode, nothing else happens.
It's stuck in there, it does not react on buttons, nor is it seen by adb.
What can I do to get it back to life?
[Update]
Meanwhile I googled, installed Android SDK, went to platform-tools and tried adb and fastboot.exe.
adb devices gives an empty line.
fastboot devices gives the tablets serial and the word fastboot
fastboot in conjunktion with reboot, reboot-bootloader, continue tries but does nothing on the tablet.
Looks as if I have to wait until the batterie gives up, what do you think?
killerhippy said:
Tried that, now it is showing fastbootmode, nothing else happens.
It's stuck in there, it does not react on buttons, nor is it seen by adb.
What can I do to get it back to life?
Click to expand...
Click to collapse
hold the power button till it turns off and turn on again.
not shure but this worked on the older fires.
Success!
Thanks a lot!
My v5.0.1 german tablet boots into
- recovery mode with volume down + power on keys pressed
- fastboot mode with volume up + power on keys pressed.
Recovery mode says:
Amazon system recovery <3e>
Volume up/down to move highlight;
enter button to select.
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
I have this same problem on my fire that I have only bootloader 5.1.1 and tablet does not start and I can not enter the recovery I wonder if I can help solve
I have 2 Fire 5th gens, 5.1.1, and both have the factory APK mode on vol up button and fastboot mode on vol down. NO recovery mode option. I can't even make it boot into recovery using fastboot reboot commands.

Help mode "test"

My zuk z2 pro went into test mode and I can not get out
Help
I have the same problem. I cannot even touch the buttons at the bottom, which is very annoying :/
Please see this post
phoenixrap said:
My zuk z2 pro went into test mode and I can not get out
Help
Click to expand...
Click to collapse
I don't enter in the fastboot mode. The phone is blocking in mode FFBM and I can't touch de bottoms on display
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
JBoy53 said:
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
Click to expand...
Click to collapse
UPDATE: TWRP 3.0.3-0 saved my ass. It permits selection of booting into EDL (9008) mode, bypassed all the PC based commands that weren't working, and I reloaded Zuk factory ROM again. Got past the test mode screen finally. Discovered that I don't care for the original ROM at all, too many Google things I'm accustomed to (Like Google Play store) missing. Added a few things back in, but wasn't worth the trouble. It took me about 15 minutes to refla sh it using TWRP with the latest nightly version of the Mokee ROM for this device (Android 7.1.2) and it works GREAT. Lineage wasn't ready yet.
The only hold over from all my initial problems is that upon boot it acts of if I'm doing the up Vol button action. It goes to the screen where I can press a Vol button and go into the boot loader or just wait 5 seconds for it to carry on booting normally. I don't know how to correct this, but not really a problem.
Link about TWRP 3.0.3-0 -
HTML:
https://forum.xda-developers.com/zuk-z2-pro/development/twrp-twrp-3-0-3-0-teamwin-recovery-t3529601
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Works fine.

Categories

Resources