Moko Case finally available for TF701 on Amazon - Asus Transformer TF701

At least in the US there is finally some movement in the accessory market for the TF701. There is a Moko case available for $20.00 and eligible for Prime! Hopefully there will be some aftermarket chargers/cables soon.
http://amzn.com/B00B0MLTD4

Mine's coming thursday. This thing is too big to risk an unprotected drop.

Thoughts on the MOKO
lbp102 said:
Mine's coming thursday. This thing is too big to risk an unprotected drop.
Click to expand...
Click to collapse
I purchased two, for the two 701's in my family. The exterior look was very good. The stitching neat and even. The case is very light, and does not add too much to the size, and heft of the tablet. Every hole lined up as they should, though the camera hole on the back is close. The flap that keeps the tablet in also tends to get caught on its velco. I recommend putting a piece of paper against the velcro, then insert the tablet and the flap as far as you can into the pocket, and then remove the paper. This will ensure that your "baby" is well positioned into the pocket, and thus aligned better for the holes.
The only negative is that on both cases, the interior "felt" surfaces were not very well glued to the case. The result was very unsightly wrinkles in the felt in both of the cases. Nothing functionally wrong with it. Just very unsightly.
Still, worth purchasing, and of note is the hole in the case that allows you to charge the tablet while the case is closed.
Update: After a few months of average use, the facing is splitting. The area on the left, where my thumb rests when in landscape mode has split. Very disappointing in an otherwise great case.

god damn where is that Transcover

I purchased the Moko case from Amazon for my TF701T as well. The fit is near perfect. Construction is decent. The feel is not cheap. The accessory pockets are a nice touch to carry biz cards, id, stylus and a misc document or two. Overall not a bad buy for $20.

Looks nice. This one has been handy for me.
http://www.cyberacoustics.com/store/Products/iPad--Tablet-Accessories/IS-4000
Im looking at getting some kind of gooseneck tablet holder as well.
Something like this. http://www.amazon.com/generation-smartphone-transformer-blackberry-Easy-Adjust/dp/B00A86QWN0
But Im not sure which one is good.
One with an arm
http://www.amazon.com/LapWorks-Armb...sim_cps_7?ie=UTF8&refRID=03H7CAZ7PFYE69GM575A

Car holders
I have seen a few rolling around the EU side of Ebay. Headrest adapters, and window suction cup holders to use a nav panel I imagine.
I'm still new to the site, so I can't post links until I hit 10 posts. :/

Related

Is this eBay case any good?

http://cgi.ebay.com/Leather-Carrying-Case-for-HTC-Advantage-X7500-X7501-New_W0QQitemZ180231674522QQihZ008QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Just wondering if anyone's tried this case. It would be nice to know about the quality and fitting. I'm also very curious if that belt clip will last.
Thanks in advance!
J
hello,
I've not tried this case but I've had several with the plastic belt clip
and if you have a job that involves sitting a lot they can be fragile,
or if you do lots of manual work. I find the sewn belt loops flatter
and stronger. the krussel case is hard to beat
jay
Never used it, but i'm certain you'll soon be disappointed if you buy that case. IMO, a good case is an absolute must. You don't want your Athena falling off your hip when getting out of the car do you? This always happened with my old axim case with a plastic clip. Nutshell guarantees their case, including the steel clip or leather loop (whichever you get), for two years. Expensive though, but worth every penny to protect my athena.
http://tuff-as-nuts.com/index.asp?PageAction=VIEWPROD&ProdID=564
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
skyungjae said:
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
Click to expand...
Click to collapse
Just watch the screen. I once put my universal in a case in my trousers pocket, you guessed it the screen cracked! cost £100 to fix it. lord knows how much the athena's screen would cost, more than the machine is worth I guess.
I have one, the 2nd week the belt clip brike getting in the car. Not to mention the phone slipped right out from it twice, with my foot action as a cushion (broke a piece of th tab on the battery door) and the 2nd time was last week at the gas station. The cases are designed with crappy materials but with a bit of mod I saved mine from going into the garbage. I had to cut the back open and put a piece of plastic in it for more support against it flopping. I used a hot air gun to soften the side holders and bend them in slightly for a more snugged fit. At the end of all that the next morning I broke the plastic tab on the case going into the car. Now I still have the case using but only because I've not finished mounting the belt clip on the OEM case as yet, as i've already already cut a caller display into the case and used that strip to make a leather flap to close it. Once I find a steardy belt clip I will post pictures of the mod. If I can't find one strong enough that will not break I will go for a standard clip mounted back and stitched on for a better look.
Back to this clip, I would recommend getting it if you can do a little bit of mod on your own, but BE WARNED if you don't mod the rails on it, your liable to damage your device, when (i said when, because eventually it will) slide out.
See what I said about that ebay case, and what you should buy instead on my thread: http://forum.xda-developers.com/showthread.php?t=344605
Bottom line, run FAR, far away from that ebay case.
Tuff-as-Nuts now has an option to get a slightly larger Athena case that will accomodate the Athena+case (thanks to my having one special ordered one). You can now have it either way.
Brad Miter
Ebay Trash
I had the ebay case for one week before the clip broke. It is made of the cheapest, thinnest plastic I have ever seen. I have a Verizon phone from my employer that came with a clip similar to this one. Even though the Verizon phone is about 80% lighter than the Advantage, the clip that came with it has plastic three times thicker. After the Ebay clip broke, I started using the case with my Verizon clip. It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
LocoHarami said:
I It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
Click to expand...
Click to collapse
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Abram said:
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Click to expand...
Click to collapse
A very good, protective black leather case. No belt clip.
http://cgi.ebay.co.uk/Book-Type-Lea...hash=item120199602780&_trksid=p3911.m14.l1318
Post 12 from wajiguqu0223 reported. Completely meaningless in the context of this entire board, and my guess is its a precursor to some major spam campaign.
edit: old post 12 has been deleted. Good. (which now makes this post 12, lol)

HTC Leo Leather Case for £2.99

Hi Guys, just received this in today's post and only cost me £2.50 (was ordered on Boxing Day, they are now costing £2.99) including postage and packing from Hong Kong. My partner also bought one for her Tocco and the total cost was £5 by Paypal. What a bargain.
It is superb, leather, and exactly as described with magnetic catch. Leo fits perfectly but unfortunately the screen guard is a midge's too large but it isn't needed anyway.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250552030138&ssPageName=STRK:MEWAX:IT
Regards, Baz
Nice find How long did shipping take, and I presume the magnet doesn't effect the screen, or the compass?
It took exactly 10 days from ordering to delivery this morning. My partner's brother bought one for his HTC and showed me on Christmas Day. I ordered mine the next day and it arrived this morning. It's brilliant, especially as it was only £2.50 (although selling now for £2.99). Includes case, screen protector and screen wiper.
Magnet doesn't affect the screen as it's on the flap. I have tried the compass and the needle is affected if you move the magnet over or under the phone.
Regards, Baz
That is so darned cheap!!! I am impressed!
Thanks Baz - Ordered
I will use it for those 'rough & tumble' times when the phone needs more than my (ill fitting) Zagg
Hi,
how is the HD2 held in the case i can't see from the photograph?
is the proximity sensor ok?
thanks
robertsmith1873 said:
Hi,
how is the HD2 held in the case i can't see from the photograph?
is the proximity sensor ok?
thanks
Click to expand...
Click to collapse
One of the pictures lower down show a plastic section that it clips into.
so it does, i did not hover the mouse, silly me.
Look ok for 3 of the queens pounds, i'm havin that.
TATA
Just taken delivery of one of these cases and I must say it's very good value. OK it's not 'true' leather but bonded leather so probably won't be as durable in the long-term as top-grain case, but unless you're extreme in your use of the HD2 then it'll probably last the 18-24 months of a typical phone contract.
The quality is very good and it fits very well, the plastic housing into which the phone fits offers great additional protection around the external perimeter of the phone so will reduce the risk of screen damage should the phone be accidentally dropped. The aperture for the camera lens in sufficiently deep enough to cover the lens cover so you don't get the annoyance of the sharpish lens from rubbing when in your pocket or on a nice polished table! Importantly (for me) it doesn't add too much bulk to the phone so it still slips easily into a shirt pocket and the phone can be easily popped-out so I can place it on my desktop cradle or in-car holder.
The finish looks very professional with the light grain being very similar to the grain on the original HTC leather pouch. It's a little more shiny than the original pouch finish and is in black, which I personally think suits the phone better. The stitching on mine is finished in a deep golden thread (slightly darker that the thread used on the HTC pouch) which adds a nice detail. The inside of the case is finished with a fine man-made suedette lining which shouldn't scratch or mark the phone in any way. There's no pockets for business cards or SD cards, but these would only add to the bulk and are not needed for most users I would have thought.
The fit is excellent and the phone fits into the hosing very snugly without the need for annoying clips or straps across the face of the phone. The magnetic clasp seems to hold very well and closes with a reasuring 'snap'. The volume control, Micro USB connector and headphone socket are all easily accessible when the case is open, although annoyingly there's no pass-through hole in the case to attach headphones when the case is closed. Apart from that and the compromise on the leather, there's little to fault this case and for the very low price you really can't beat it for smart looks and a good degree of protection for your phone.
In addition to the case, I was also supplied with a screen protector (with small cleaning cloth) which looks to be of reasonable quality although I haven't fitted this myself as I find these tend to lift at the edges and also reduce the responsiveness of the screen.
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
For £2.99, this is a no brainer. Just orderd mine.
omneity said:
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
Click to expand...
Click to collapse
Still waiting for mine (ordered 6th Jan...), so not sure what the material is in that area.
At your own risk,
If 'leather', use a belt hole punch.
Or a small SHARP drill (& if its hard plastic).
If (also) fabric, put a dab of super glue on the fabric, to seal the weave, first & let it dry before holing it.
If a man made woven fabric, heat the hole punch, so that it will fuse the cut edges of the hole when pierced.
Metal grommet / ferule not recommended in case it causes a short when inserting / removing the headphone jack. Over a period of time, might remove the gold plating off of a jack too.
Leather case
Picked up one of these a day or so after I got my device, same seller as OP.
The case is nice enough, have dropped it once already - no damage to the device thankfully. The front flap can fold all the way back round the device and be held there by the backside of the magnet in case you're watching a film/browsing/gaming and don't want the flap in the way.
The only downside that I can see is that it's an absolute git to get out of the plastic 'cradle' (more like a bleeding strait jacket) if you want to change memory card/battery or just get it out to show it off.
any comments?
was looking to get something along these lines, with slots for cards so I don't have to carry along my wallet at times, but without the belt clip/knob
the hand stitched cow leather is customizable but at 100euros, alittle out of my budget
omneity said:
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
Click to expand...
Click to collapse
Will it fit into a paper punch?
bakabear said:
was looking to get something along these lines, with slots for cards so I don't have to carry along my wallet at times, but without the belt clip/knob
the hand stitched cow leather is customizable but at 100euros, alittle out of my budget
Click to expand...
Click to collapse
Beware the proximity sensor for your ear. In that image it looks to be covering it!
robertsmith1873 said:
Beware the proximity sensor for your ear. In that image it looks to be covering it!
Click to expand...
Click to collapse
Thanks for the reminder! almost forgot bout it, is it across the top row beside the notification LED? looked through the manual but no reference to it
BTW, found a cheaper alternative, just as functional from another thread
these ones bout 40euros each, the tan one allows access to the bottom ports whereas I dont think the black one does
which would you guys prefer? worry that the tan one might block the sensor as well
Just ordered one, thanks for the tip!
Simon
Leather slideout sleave for the HD2
Hi Community, I like my HD2, so I bought a leather case for it. It's like WOW.
It costs 13,90 Euro - i.e. not the world and fits very well
Check it out in EBay:
SunCase Etui Tasche Ledertasche Case LUXUS für HTC HD2
The seller is: sale-hamburg
http://cgi.ebay.de/SunCase-Etui-Tas...temQQptZDE_PDA_Zubehör_KM?hash=item23043167fb
Have fun, as I am having
Regards
Just got my £2.99 case today. It's epic value for money I'm hoping that this will be enough to protect my HD2 when I go snowboarding in a couple of weeks time.
damn i noticed this thread too late... they are sold out i hope they will get some more for salle

Slim Magnetic PU Smart Cover Stand (ebay) + Speck FitFolio Review, Comparisons, etc.

Hello! This is a quick review highlighting these two products. Of all of the cases I've tried (believe me, I have about 7 or 8 at home...) these two reign king. I'm unsure of which one I'll ultimately go with, but I do have some opinions about each that I'd like to highlight. For what it's worth, you can't go wrong with either case - but they do have slightly different features which may or may not sway you in those corresponding directions.
This entire post isn't really a defined "this is my Speck FitFolio case review" and then following "this is my eBay case review," but instead it's kind of a mish/mash of the two products all at once. I'll compare them, highlight differences/similarities between the two, etc.
To start, here is the direct link of the one I purchased from pandamimi2011 on eBay. I went with this user because it ships out of California so I knew I wouldn't have to wait two months for it to come from China, plus his/her feedback looked solid. I paid for the middle tier of shipping and it came on Wednesday when I ordered it on Sunday. I'm in Pennsylvania (on the other side of the country), and we just had hurricane Sandy rip us a new one. To say I'm satisfied at the shipping speed is an understatement.
The feel of this case is pretty nice. It has tiny grooves over it, so it almost seems like a very faint "metal file" feeling of some sort. It's got a slight rubbery texture, which when coupled with the grooves feels a bit more grippy than the Speck case, which is something I like. It does however present it with a slight -1 in the pocketability department. The Speck can be slid into my back pocket of my dress pants somewhat easily. The thickness of the Speck vs the width of my pocket makes pocketability decently possible, however if the thickness of the N7/Speck were any thicker, it'd be a different story. With the eBay case, I can make it happen, but I have to wrestle with it for a few extra seconds first. Not a big deal, but it's enough of a deterrent that when I'm walking up and down the hall at work, for short walking bursts from one tech issue to the next I may just hold it.
When both cases are opened and folded back the magnet does not interfere. Each one wakes up/sleeps the device easily and predictably. I will say this, though... when I was trying different variations of the eBay case to ensure the magnets worked properly, I noticed something. It appears as if the wake up/sleep magnet on the Nexus 7 is located on the left side - not on the right. I say this because due to the eBay's case design, it has a "tri fold" thing going on with the front flap that covers the screen. If I fold it so only the left side is flat on the screen, yet the middle and right is up in the air away from the tablet, it indeed sleeps/wakes up the N7. Whenever I saw other video reviews, people would point to the right side to indicate it had a smart feature. Either way, doesn't matter, but just an observation worth pointing out.
The back shell (the skeleton) cradling the Nexus 7 in both scenarios is solid. With each case, the N7 pops in easily and securely. With the Speck case I found it's easier to "eject" the N7 when starting from the left side, where there are some spaces in the mold. It's much more difficult to start on the right side where it's full length. See picture to see what I mean. Meanwhile with the eBay case, both the left and right side spans the entire length. Because of this, it makes the "eject from left side" idea (which works great on the Speck) fail with this case. Instead, it's easiest to eject the N7 around the charging port cutout at the bottom. See picture.
Another difference between the two worth noting is the latching mechanism. The Speck case has a clip, and a very well designed clip. The clip itself is attached to some sort of heavy elastic, which has a very slight amount of "give" when securing the flap. It's very solid and gives me 100% confidence that if I drop my case, it will not open unless, somehow, it's an epic fall that manages to break the clip itself. The eBay case however latches based on magnets. There's a magnet strip in the flap that folds behind the tablet when closed. It's not a strong magnet, however because it's an entire magnet strip, it holds on decently. I held my tablet with both hands and shook it until the flap opened up. You sure have to give it a good solid swift movement in order to have enough momentum for the flap to fly open. If my tablet were to take a tumble down a flight of stairs, the Speck case would almost definitely have the +1 because I believe the magnet would give way and open up. For just general protection, excluding extreme falls etc, the magnetic flap provides adequate security. This didn't really sway my opinion in either scenario, since I was just happy to have a case like this where there is a magnetic flap to keep it closed... whereas some cases like this don't have this magnetic flap whatsoever.
Speaking of the latching mechanism, one concern I have about the Speck case is while it latches securely, I do wonder how it'll hold up in the long haul. I use my Nexus 7 for a lot at work as I work in IT. I'm frequently opening, closing, opening, closing, over and over and over possibly hundreds of times a day. In the 10 days I've had the Speck case, I've noticed that the latch has become much easier to clip and unclip. Some may attribute this to being broken in, but considering it's hard plastic vs hard plastic, some degree of wear may be a side effect. So while the Speck latch holds closed more securely, the eBay case would almost definitely have more longevity. I also like with the eBay case that I can kind of throw the front flap shut in my hand, and thanks to the momentum, the magnetic flap flips around the back of the case and stays put thanks to the magnets grabbing it, which is kind of nice because it doesn't require a physical need to latch the clip. This may be splitting some rather extreme hairs, but I wanted to document exactly what my thoughts were on all accounts, as major or minor that they might be.
The other difference I want to notate is the button cutouts. The Speck has volume up/down in one cutout, a separation, and then the power button cutout. This is nice because when I'm feeling for the buttons it's more obvious that I'm hitting volume up instead of power, which often happens. The eBay case has one open cutout for all three buttons. However, while all three buttons are lumped together, the actual thickness of the plastic mold is indeed thinner, making the feeling of the buttons easier to detect even though there's not a separation. It's one of those half empty/half full things that likely doesn't matter in the grand scheme of things, but there's pros and cons to notate on both sides.
The stand up positions with both cases are decent. The Speck offers a little more versatility for some of my uses, as I'm often laying down in bed on the N7. Due to the wider platform the case gives when it's propped up in horizontal mode, it's a bit easier to prop it on my stomach/chest without issue. This probably goes without saying since most people would detect this immediately when they see a picture, but with the eBay case, due to its tri-fold design, it makes the "propped up on stomach/chest when laying down position" near impossible. It does however provide a decent range of prop positions when on a table/desk of some sort, much like the Speck. Certainly not a deal breaker, but worth mentioning.
Overall, you won't lose no matter which case you get. Both of these cases are easily contenders for the #1 spot of all of the cases I've used. The number 1 thing I love about both cases is the plastic mold they fit into. There's nothing covering the bezel anywhere and there's none of this 6 prong thing going on around the edges like the BluRex Ultra Slim case among other various cases. (not to say it's a bad design, but I personally prefer the mold design). I do believe I'll be sticking with the eBay case for a while, as I find the magnetic flap to be a little more well suited for my uses. I also think the eBay case has a slightly better price-vs-product ratio, as even with mid-tier shipping I paid 18 or 19 bucks for it, while the Speck ran me 30 bucks. Considering both of these cases are directly on par with one another, it stands to reason that the eBay case in this scenario could easily be the winner for being the "better bang for the buck." Either way, both cases are very worth their money and both are highly recommended.
Great in depth review! Need a pic gallery comparing findings would be nice. Not saying to post every single pic, but maybe host it somewhere where you already uploaded them?
Nevertheless, the review is well done! :good:
kpjimmy said:
Great in depth review! Need a pic gallery comparing findings would be nice. Not saying to post every single pic, but maybe host it somewhere where you already uploaded them?
Nevertheless, the review is well done! :good:
Click to expand...
Click to collapse
That was my intention when I wrote the review a few days ago. The above info I had written up before and just saved in an office doc, so to post I just pasted over. I'll be able to add pictures later this evening.
Which one is thinner?
Ehh we may have a show stopper finding here. I was using my tablet earlier with the eBay case and when folded back it shut off at one point. I spent what felt like five full minutes trying to replicate it but couldn't. Later on when I got home I was able to... it's only at a very exact point that it happens, but once I got the hang of it I could replicate it a bit easier... I just find it crazy that for hours after unboxing it I wasn't able to notice it. The eBay case indeed has a design flaw in that regard. I'm going to email the seller and see what he has to say about it.
Something else worth noting is when the Speck case is folded back you can clip it in place which is a nice touch. Without clipping it when folded back cases like this tend to have a sloppy feeling when holding it with one hand. That being said, I'd say the Speck takes the cake here.
Sent from my Nexus 7 using xda app-developers app
JaSauders said:
Ehh we may have a show stopper finding here. I was using my tablet earlier with the eBay case and when folded back it shut off at one point. I spent what felt like five full minutes trying to replicate it but couldn't. Later on when I got home I was able to... it's only at a very exact point that it happens, but once I got the hang of it I could replicate it a bit easier... I just find it crazy that for hours after unboxing it I wasn't able to notice it. The eBay case indeed has a design flaw in that regard. I'm going to email the seller and see what he has to say about it.
Something else worth noting is when the Speck case is folded back you can clip it in place which is a nice touch. Without clipping it when folded back cases like this tend to have a sloppy feeling when holding it with one hand. That being said, I'd say the Speck takes the cake here.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Any word from the seller?
I prefer the Blurex/Moko style than your ebay case. It is classy and suitable for business style. ebay case looks cheap with the plastic cover, and it may hurt the Nexus 7's plastic sides.

REVIEW: Smartphone Experts leather side pouch (hip case)

Finding a leather case that's really made for the Note 2 that goes on your hip is a heck of a challenge at best. There's lots of pleather cases out there, and ones that aren't made for the Note...they're big enough to hold two of them I've heard! The case made right is big enough already, it doesn't need to be bigger than needed.
So after lots of looking I settled on the Smartphone Experts Side Pouch.
From what I could tell in the pictures, it looked like a good case and with the black friday discount, I got it for ~$21, not bad for a leather case.
It came in today, and I must say I'm pleasantly surprised. It truly is real leather, smells great and is stamped so on the back (you can see it in the pictures.) Stitching is done nicely, and with black thread instead of the white I see so often. Thank god for that, I don't need my case looking like a leisure suit!
There is extra padding on the exposed side of the case, I haven't seen this before in other cases. This can be seen in the pictures too. The belt clip is sturdy and strong, even though it looks small. The closure is magnetic and holds the flap down securely. Honestly, I don't know if magnets really mess up the phone, but it would be a simple matter to slide a sheet of mu-metal foil inside of the padded area to help with that.
The fit is quite snug, but one can expect that with all leather cases. They usually take about a week or so to form fit to your device. After that, it'll be quite easy to get the case in and out of my pocket. It does have a finger hole in the bottom center of the case to enable you to pop your device out easily. One miss, as pointed out by BrooklynAvi is that there is no headphone hole. I don't use headphones, but I can certainly see how that'd be a problem.
So, all in all, a very nice quality case. Definitely would recommend to anyone looking for a leather hip case.
Thanks for the review. Do you think this pouch can fit the Note Ii with a case? Maybe I'll be a tight fit.
Kinda hard to tell; my phone is naked. The extra padding is soft, so it does have some give in it. If the case is thin, it'll probably go. Good thing is that leather stretches with time, so it should stretch to fit eventually?
I love the Seidio holster but they aren't making it for the GNote 2 without an additional case. In addition to the cost of the extra case, I don't want to have a case on my phone. The strange thing is they make two of those type of cases which annoys me. One should have been the regular one. Well, they said they don't plan to make one so I was in the market for a traditional hip case. I found this one and you confirmed a few things I wanted to know so I'm ordering it now. I used this type for my Dash and several other devices so it shouldn't be too bad. Better than my pocket.
I thought this thread was going to be about a hip ie. fashionable case
I've been deceived ha ha
Sent from my SGH-T889 using xda premium
Kawaisa said:
I've been deceived ha ha
Click to expand...
Click to collapse
Yeah, well.....
One thing I can't stand is a phone in the pocket. Only way to make that worse is to have a LARGE phone in my pocket. It may not look cool, but you can't beat a case on your hip for ease of access.
One (or two) big issues
OP: Can you add this comment (in brief, of course) to the OP so others know the headphones hole is missing?
So I received the case and it was exactly what I expected in terms of quality. It really is designed for a belt but works well on my pants alone when I don't wear a belt but falls off my sweatpants at home (I don't wear my case at home much anyway and this is to be expected). Here are the issues. There are no cutouts for the headphone and charger. The charger isn't truly and issue for me as I doubt I will charge it while wearing it like I've done with other phones (while out and using an external charger) because the battery life is tremendous on the GN2. But I really use the headphones while wearing the case. I actually think that this is a vital feature that was overlooked. My solution will be to pay $5 or $10 to have a professional seamstress cut a hole in it and stitch up the hole. Yeah, it's that important to me.
So if you need a case like this then it's really your only choice. I just didn't think to ask. It's solid though and once it stops being stiff I'm going to enjoy not having to carry the device in my pocket. I'm a huge fan of side cases and this is a really good one. (Anyone remember the awesome one that came with the T-Mobile Dash?)
After a week or so of use I've decided I'm returning the case. It simply doesn't stay on my side and it's fallen off in my car a few times. It even fell off while I was walking. I'm so disappointed in a case that could have been so good.
Sent from my GT-N7105 using xda premium
I never buy those belt clips like that, i had a bad experience with those. The belt part becomes every flimsy very fast. Im still looking for a nice belt holster that isn't ottercase or siedo.
I haven't had a problem with it falling off, but then I always had a belt on when I was using the case. It's a good case, but I've switched to the Best Buy Pt/seidio surface case. Gives the extra grip I need and love the holster.

[REVIEW] MoKo/Blurex/Others slim case

I know there are probably already plenty of these, but I thought I would share my views, and hopefully help someone! I have had this case several months, so this is not a first impression For the lazy ones, skip to the bottom for a summary. :silly:
Many of you have probably seen this case on amazon or this forum. It is a PU leather with a landscape stand, sold under many different brand names on amazon.
Instead of the case coming around the bezel of the device, or using a breakage-prone plastic clip on case as some others do, this case has 6 or 7 clips (depending on the version) to hold the Nexus in. There is one on each corner, and another on the top and bottom. 2 of the corners unclip and the device flips out in landscape mode to make a stand (no portrait stand, but this is common to most cases unfortunately). Some variations also have a hand strap.
Now, the big question on everyone's minds. Quality. I have found this case to be very good, as have others who have tried them. Unlike some other cases such as the Nillkin smart cover, there are no plastic parts to crack, or joins/edges covered in that waxy plastic coating, that seems to be prone to cracking and peeling. All the edges are sewn, so no issues there.
Another worry I have seen come up on the forum is the metal or plastic clasp that clips over the edge of the device for closure. Some worry this could scratch or damage their Nexus. Don't. I have been using this case for around 3 months now, and my 7 still looks as good as the day I got it (well, apart from the filthy screen ) In fact, I prefer this to a magnetic strap, as it is far more secure!
Although this is a great case, it still has its issues. At first, the clasp is quite tight, and hard to close, but over time this loosens as the case stretches slightly. This happening is great, apart from the fact that on mine, it no longer held the smart cover magnet close enough to the screen, so the smart cover only works intermittently. I understand mine may be from an old batch, and this has been fixed with a stronger magnet.
For all of you in the USA, this case is easily available on Amazon, but for me in Australia, it is not so easy to find. There is a variant by Caseen called the Soft snap, but this is 3x the price of the Chinese amazon version. For anyone outside of the US, I could not find it on eBay, but eventually found one on a Hong Kong wholesale site, Aliexpress. I will post a link once I am allowed to.
So, for all the lazy ones who skipped to the bottom, to sum up:
Pros:
Slim, adds very little bulk
Clever stand design, does not add thickness
Cheap
Secure clasp
Cons:
Hard to get outside of Amazon USA
Clasp too tight at first
Some have issues with smart cover
Yeah, there are quite a few threads for this that you could have posted into, but this case IMO deserves attention. A few people at work have asked me about mine and have gotten one (although one apparently wasn't paying attention and got a similar case and he doesn't like it.. he's getting the moko now )
Besides fit, form, and function which are all great on this case, I expected the strap to stretch out and the pleather to scuff up, fray on the edges, rip, etc and look shabby like almost all PU does. Nope. This is good stuff, whatever crazy chemicals it's made out of. The case looks the same today as it did when I bought it a few weeks after the N7 was available, straps are still tight even though I use the hand strap quite a bit, snap is still good (and as you said; no damage anywhere) etc.
Thanks for the feedback! I will try to find others next time to keep clutter down.

Categories

Resources