[OFFICIAL] CyanogenMod for DEVED VZW Note 3 (HLTE) [NIGHTLIES] - Verizon Galaxy Note 3 Original Android Development

CM11.0 for the Verizon Samsung Galaxy Note 3 Developer Edition (Bootloader Unlocked Device)
INSTALLING CUSTOM RECOVERY AND/OR THIS FIRMWARE WILL VOID YOUR WARRANTY. UNDERSTAND THE RISKS.
CURRENTLY NFC SERVICE CAN DRAIN THE BATTERY BY LOOPING (DUE TO LIBS BUILT FOR NON-VZW NFC CHIPS).
TO FIX THIS FLASH THE FOLLOWING ZIP FILE AFTER ANY ROM .ZIP:
Mirror 1 (Goo.im)
Mirror 2 (Crackflasher)
A WORD ABOUT HOW THE GALAXY NOTE 3 WAS BROUGHT INTO THE CYANOGENMOD DEVICE SUPPORT TREE
This was not a magical event where the device is now fully supported on AOSP. Many devs worked very hard for quite some time to get this device working as it stands today (most of it done by the CM dev team). Each dev has done more than just what I'm listing below, but these are the highlights.
@noobnl / Utkanos both worked on the device bring up, config settings, ramdisk and debugging
Cyanogen did most of the kernel work bringing in the needed commits to bring the device up to CAF KK compliance
Arcee helped with some RIL and kernel issues
Slayher helped with debugging and testing
I worked on audio issues and am doing in-progress work on the new NFC chip in VZW/TMO variants
And several others (whom I'm forgetting) helped in other ways
DISCUSSION THREAD:
http://forum.xda-developers.com/showthread.php?t=2593464
OFFICIAL NIGHTLIES:
http://www.get.cm/?device=hlte
GAPPS:
http://wiki.cyanogenmod.org/w/Gapps
INSTALLATION:
Make sure your device is unlocked
Install TWRP or CWM recovery for the Note3
Download the ROM / Gapps and place on your SD card
Reboot to recovery
Make a backup of your stock software
Install the ROM / Gapps
Wipe Cache / Dalvik
Reboot and Enjoy
CURRENT KNOWN ISSUES
Don't expect NFC to work anytime soon it's a brand new NFC NXP PN547 chip. I'm working on it as I get time.
GPS lock issue(?)
The Samsung flip cover is currently not supported for turning off the screen when closed.
S-PEN is currently setup to work like a mouse interface. It's a WIP.
WANT TO CONTRIBUTE?
Please submit a patch to the CyanogenMod gerrit site if you want to help out.
WANT TO BUILD YOUR OWN?
Head over to https://github.com/cyanogenmod/android/tree/cm-11.0 and follow the instructions.
COMMENTS:
Through the build-up and debugging process, I've been using this as my daily for over a week now. And I can comfortably say.. you won't hate it, but there WILL BE bugs that are being worked out. Worth the flash? Make a backup in TWRP and find out.
XDA:DevDB Information
[OFFICIAL] CyanogenMod for DEVED VZW Note 3 (HLTE), ROM for the Verizon Samsung Galaxy Note 3
Contributors
Hashcode, noobnl, Cyanogen, Slayher, Utkanos, Arcee and the CM Dev Team
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: Unlocked / DevEd.
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2014-02-19
Created 2014-01-07
Last Updated 2014-05-14

Reserved

Reserved

Hashcode...
This is why you are the man. Thank you so much for this, finally I can get rid of TouchWiz. I just really like PURE Android, the way it's intended to be. The Note 3 as it should only be...
Again thank you.

Don't have the Dev Edition but thanks for maintaining so many devices. You are a huge asset to the community for all that you contribute.

Thank you very much for this.
Do you have any observations/comments/feedback about enabling ART?
Installed & working great. Definitely a daily driver for me.
Donation sent.

thanks i will be trying as soon as links are up!!!!

oneandroidnut said:
thanks i will be trying as soon as links are up!!!!
Click to expand...
Click to collapse
The links for the unofficial version are up. Downloaded and running great!

cam30era said:
The links for the unofficial version are up. Downloaded and running great!
Click to expand...
Click to collapse
i knew i should have brought my note 3 to work today!! ugh

only if i bought the dev edition...

Thanks Hash!!

Thank you Hashcode!

oneandroidnut said:
i knew i should have brought my note 3 to work today!! ugh
Click to expand...
Click to collapse
Thats ok you just stick with that HTC thang.

Awesome to see this, might have to sell my loki'd S4 and pick up a dev N3. Thanks!

dasx86 said:
Awesome to see this, might have to sell my loki'd S4 and pick up a dev N3. Thanks!
Click to expand...
Click to collapse
Last I heard they were going for a cool thousand bones on eBay. Good luck!
Sent from my SM-N900V using XDA Premium 4 mobile app

droidstyle said:
Thats ok you just stick with that HTC thang.
Click to expand...
Click to collapse
dont mess with my htc! i love it!

I ran the sprint build OK yesterday but today, I am getting SOD when my device goes to sleep. Clean install on Hash's build. Anyone else seeing this?
Sent from my SM-N900V using Tapatalk

aerichards1977 said:
I ran the sprint build OK yesterday but today, I am getting SOD when my device goes to sleep. Clean install on Hash's build. Anyone else seeing this?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
It happened to me once yesterday on Sprint cm11. So far, nothing today on this ROM.
Edit: no sooner did I type this than I got a SOD.

Thanks Hashcode! Running great!
Once I get out of debt from Xmas donation coming your way.
Edit: I had a sod while my phone was charging.

I haven't had one yet. I enabled developer options, then went into performance and my min processor speed was set to 1728 so I dropped it down to 300 and set to conservative. So far so good!
Sent from my SM-N900V using XDA Premium 4 mobile app

Related

[ROM][P75x0/p4wifi/p4][JB4.3]Omni ROM (3-Nov-2013)

Earlier, I have been compiling InfamousAOKP, Paranoid Android, Carbon and PAC for the galaxy tab (P7510/p4wifi & P7500/p4) based on JellyBean 4.3. I now decided to move over to OMNI ROM as base: http://omnirom.org/
The nice thing of OMNI in my personal opinion is smoothness: it is relatively low in features, but at the same time it is not that resource hungry as some other ROMs. The end result is a smooth ROM.
It features the Infamous kernel (same kernel as for JB4.2, with SELinux).
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Install Superuser
-Install gapps (you can download any gapps package you like, as long as it is specifically for JB4.3!)
-Boot it up
Update installation (OMNI -> OMNI):
-Boot into recovery
-Install ROM
-Install Superuser
-Boot it up
Credits:
OMNI team for the code
pershoot for the basis for the device trees & kernel base
AAccount for his help along the way to get JB4.3 to compile for our aging device!
Downloads:
P4WIFI:
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/omni/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4wifi/omni
P4:
http://rootaxbox.no-ip.org/kasper_h/roms/p4/omni/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4/omni
Code:
Basis of OMNI code: https://github.com/omnirom/
Device tree p4wifi: https://github.com/InfamousAOKP/android_device_samsung_p4wifi/tree/mackay-omni
Device tree p4: https://github.com/InfamousAOKP/android_device_samsung_p4/tree/mackay-omni
Common p4 device tree: https://github.com/InfamousAOKP/android_device_samsung_p4-common/tree/mackay-omni
Kernel tree: https://github.com/InfamousAOKP/android_kernel_samsung_p4
Vendor blobs p4wifi: https://github.com/InfamousAOKP/android_vendor_samsung_p4wifi
Vendor blobs p4: https://github.com/InfamousAOKP/android_vendor_samsung_p4
Known issues:
1. DashClock FC if trying to enter settings -> can be solved by deleting it from /system/apps followed by installing it from Google Play
2. ROM is not rooted by default -> you should flash SuperSU (can be downloaded from the links in post #1)
What can I say.... fantastic I luv this rom installed over first Omni followed instructions no problem at all..... dill
Sent from my GT-P7510 using XDA Premium 4 mobile app
This is possibly the only 4.2 ROM I'd use because of its smoothness.
Jay Rock said:
This is possibly the only 4.2 ROM I'd use because of its smoothness.
Click to expand...
Click to collapse
Except that it is 4.3 :silly:
kasper_h said:
Except that it is 4.3 :silly:
Click to expand...
Click to collapse
That was either a typo or my excitement.
Jay Rock said:
This is possibly the only 4.2 ROM I'd use because of its smoothness.
Click to expand...
Click to collapse
Not possibly but is the only 4.3 rom I will use, waiting for the wifes P4 to charge then Omni here we come.... dill
Sent from my GT-P7510 using XDA Premium 4 mobile app
kasper_h said:
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Install Superuser
-Install gapps (you can download any gapps package you like, as long as it is specifically for JB4.3!)
-Boot it up
Update installation (OMNI -> OMNI):
-Boot into recovery
-Install ROM
-Install Superuser
-Boot it up
Click to expand...
Click to collapse
Hi guys.
Should superuser be installed in recovery?
If yes,where do i get the files?
Thanks
Edit: nevermind
Sent from my GT-P7510 using XDA Premium HD app
You would think that since Chainfire is part of team OMNI, the ROM would be rooted by default.
I've just read the xda portal news about OMNI, and I'm quite confused with people nowadays. I thought that all this time everyone liked cm, but it seems that they've now become the "bad guys" like Samsung and Google just because they've gone corporate and OMNI is the "hero" of the story. I probably don't understand all these because I'm a kid.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
You would think that since Chainfire is part of team OMNI, the ROM would be rooted by default.
I've just read the xda portal news about OMNI, and I'm quite confused with people nowadays. I thought that all this time everyone liked cm, but it seems that they've now become the "bad guys" like Samsung and Google just because they've gone corporate and OMNI is the "hero" of the story. I probably don't understand all these because I'm a kid.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
SuperSU from Chainfire will come into Omni by default from what I understand, it just hasn't happened yet.
I don't see it so black&white with CM. Yes, they have gone a more commercial route. Are they evil? No, I don't think so. The only disadvantage of a commercial model is that it may lead to unpleasant situations for people who contributed a lot to CM without getting anything in return. But I will personally not be deterred from using CM-source due to the CM Inc. thing.
The strong point of CM(-based) ROMs has always been the huge number of people contributing to CM, making it one of the most stable aftermarket ROMs. If you compare this to e.g. Carbon or PAC, which I have been building myself as well, the much lower number of developers and the lower number of officially supported devices by these ROMs, has often lead to less stable endproducts. I am very curious to see how this develops for CM in future, whether the large number of volunteer-developers will stick with CM or go somewhere else.
hey kasper_h, nice new build, good to see you busy and doing good work! I installed it on a 3G 7500, so far I've been having two problems besides the google TTS crash which seems to be a generic bug in 4.3, it crashes on storage settings and the USB-PC connection seems not to work as well, something related to "com.process.android.media"-something crashes and it just doesn't appear to be recognized at all on the PC side. USB on 4.3 roms worked tho.
P.S.: Love your work and dedication, thank you for doing this.
kasper_h said:
SuperSU from Chainfire will come into Omni by default from what I understand, it just hasn't happened yet.
I don't see it so black&white with CM. Yes, they have gone a more commercial route. Are they evil? No, I don't think so. The only disadvantage of a commercial model is that it may lead to unpleasant situations for people who contributed a lot to CM without getting anything in return. But I will personally not be deterred from using CM-source due to the CM Inc. thing.
The strong point of CM(-based) ROMs has always been the huge number of people contributing to CM, making it one of the most stable aftermarket ROMs. If you compare this to e.g. Carbon or PAC, which I have been building myself as well, the much lower number of developers and the lower number of officially supported devices by these ROMs, has often lead to less stable endproducts. I am very curious to see how this develops for CM in future, whether the large number of volunteer-developers will stick with CM or go somewhere else.
Click to expand...
Click to collapse
I agree with you. I don't really care about CM going commercial or whatever it is they want to do. I actually think that CM going commercial is a good thing because then the project will not stop. But it seems like there are quite a number of people hating on CM in the comments section here.
Sent from my GT-P7500 using Tapatalk HD
miztahbeezy said:
hey kasper_h, nice new build, good to see you busy and doing good work! I installed it on a 3G 7500, so far I've been having two problems besides the google TTS crash which seems to be a generic bug in 4.3, it crashes on storage settings and the USB-PC connection seems not to work as well, something related to "com.process.android.media"-something crashes and it just doesn't appear to be recognized at all on the PC side. USB on 4.3 roms worked tho.
P.S.: Love your work and dedication, thank you for doing this.
Click to expand...
Click to collapse
I will look into this.
At the same time, I don't know how much work Omni will still do on android-4.3. They already started working on kitkat/4.4.
eushaun99 said:
I agree with you. I don't really care about CM going commercial or whatever it is they want to do. I actually think that CM going commercial is a good thing because then the project will not stop. But it seems like there are quite a number of people hating on CM in the comments section here.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Yeah, I know. People like this kind of bashing anyway here on XDA it seems (although our galaxy tab section seems to have almost no problem). I doubt many of the responders do any development themselves....
Thanks for this Rom. Best one so far!
Sent from my GT-P7510 using XDA Premium HD app
Thank you!!! Installing right now
L.E. : What I/O Scheduler do you guys use on this ROM/tablet ?
Thanks!
Updated from previous BUILT, dirty flashed! Running with Google Now Launcher! Very Smooth and better memory management too. Thanks.
I have a little problem : the tablet doesn't shows when is charging. If I put it to charge it says not charging in the battery options, but it is charging.
Any ideas?
Are these updated files from those you first posted it on the PAC thread for the wifi version? Just trying to decide if I need to reflash.
Is multi window removed? I can't seem to find it.
Sent from my GT-P7500 using Tapatalk HD
Maybe a stupid question, but I can't find 'make screenshot' by long pushing the power button.
I really miss that menu option.
Btw issue same for the Omni version for the SGS1 ...
My Nexus4 has a water problem (waiting for spare parts) ... So I went back to my old Samsung SGS1
Thanks Kasper for both roms
Cu later,
Philip
Sent from my GT-P7510 using XDA Premium HD app

[KERNEL] Amperific SuperKang Project | r3 | 3.4.0 | [27-8-2014]

​
NEXT RELEASE: 27 AUGUST 2014 GMT+8 0900
With the introduction of so many kernels in the forums, every user just wants his/her phone to enjoy the crisp experience of their device. With ASKP, you get to enjoy the brilliant works of all developers into one small kernel. ASKP, is a modified kernel that merges many tweaks together, just like P.A.C.
ASKP is only run by me and pattyboi for now. Please bear with the slow speed of updates. I'm working on 3.4 for the Galaxy Nexus and also for you guys at the same time.
I promised before, ALL ROMS WILL BE SUPPORTED. But when I say ASKP is fully released. For now, I'll be releasing slowly. So please bear with me.
Supporting Devices:
LG G2
Samsung Galaxy Nexus
Variants of ASKP released for per-ROM basis statuses: http://forum.xda-developers.com/showpost.php?p=53569650&postcount=6
READ THIS FIRST
- There's always a name in each file right? The word at the end is the most important. And of course, make sure the model number is correct.
ONLY TWO WORDS ARE GIVEN FOR SIMPLICITY. STOCK and CAF.
- CAF kernels are for AOSP ROMs. A N/CAF (Non-CAF AOSP) Kernel will also be present upon full release of ASKP.
- ASKP has just started venturing into G2's development, please be patient if there is no support for your ROM yet.
- I am not responsible for any problems incurred on your device. This kernel is not fit to be a daily driver YET. Still in pre-alpha stage.
Changelog To Be Released after Alphas.
Downloads: http://forum.xda-developers.com/devdb/project/?id=4678#downloads
Savoca's Mirror: http://savoca.co/Amperific
Source: https://github.com/AmperificSuperKANG/G2-Kernel.git
Credits:
Everyone. From XDA.
As well as savoca for his awesome file transfer access to me.
Special Thanks to Dorimanx for the help in packing up the boot.img.
Based on: Dorimanx's Stock v20D Source. (Pulled from him as the internet connection I have is incapable of pushing a 1GB+ Source). This is a CLEAN LG Source.
I also want to thank him for his own build script, without it, I couldn't have built kernels as fast as before.
If you'd like to donate to me, Please do so, It'll be used for creating a tracker and an FTP site.
So you're buying yourself a beer. Heheh.
I really thank you!
Donors Hall of Fame:
- nope
XDA:DevDB Information
Amperific SuperKang Project, Kernel for the LG G2
Contributors
Amperific, Dorimanx, pattyboi
Kernel Special Features: Advanced Memory Hotplugging System
Version Information
Status: Testing
Created 2014-06-21
Last Updated 2014-06-21
XDA:DevDB Information
Amperific SuperKang Project, Kernel for the LG G2
Contributors
Amperific, Dorimanx, pattyboi
Kernel Special Features: Advanced Memory Hotplugging System
Version Information
Status: Alpha
Created 2014-06-21
Last Updated 2014-08-26
Nice! And the important advice for You right now: You REALLY SHOULD write which ROMs do You support and which G2 variants.
There are some ROMs based on dr87 sources like SlimKat, and Mahdi ROM itself, there is CarbonROM and PA which use other sources.
Aaand there is CM which didn't even get updated to KK sources, lol.
reas0n said:
Nice! And the important advice for You right now: You REALLY SHOULD write which ROMs do You support and which G2 variants.
There are some ROMs based on dr87 sources like SlimKat, and Mahdi ROM itself, there is CarbonROM and PA which use other sources.
Aaand there is CM which didn't even get updated to KK sources, lol.
Click to expand...
Click to collapse
I don't care. Like I said. I'm a welfare guy, EVERYONE GETS THEIR ASKP DESSERT.
For now, on wich ROMs will this work? I am a noob and don't know about sources and compatibilities...
Sent from my G2 running CloudyG3 on ART
reas0n said:
Nice! And the important advice for You right now: You REALLY SHOULD write which ROMs do You support and which G2 variants.
There are some ROMs based on dr87 sources like SlimKat, and Mahdi ROM itself, there is CarbonROM and PA which use other sources.
Aaand there is CM which didn't even get updated to KK sources, lol.
Click to expand...
Click to collapse
Amperific said:
I don't care. Like I said. I'm a welfare guy, EVERYONE GETS THEIR ASKP DESSERT.
Click to expand...
Click to collapse
NEO2598 said:
For now, on wich ROMs will this work? I am a noob and don't know about sources and compatibilities...
Sent from my G2 running CloudyG3 on ART
Click to expand...
Click to collapse
I think that this is for stock roms as its based on dori's sources.
Sent from my LG-D801 using Tapatalk
NEO2598 said:
For now, on wich ROMs will this work? I am a noob and don't know about sources and compatibilities...
Sent from my G2 running CloudyG3 on ART
Click to expand...
Click to collapse
You're using Cloudy's G3 eh. You're on luck. That's the first one.
Releases In order for Stock G2 and Ported G3 ROMs,
D802 (Released)
D800 (Released)
D801 (Released)
D803
VS980
LS980
After this,
Releases for All devices for Paranoid.
Then,
Releases for All devices for CM.
Also,
Releases for All devices under Mahdi's Sources.
Finally,
Releases for the next MOST requested ROM.
After this, expect features to fly in.
@nimrodsv Go ahead and ask him.
Guys, once again. THIS IS NOT A COPY OF DORIMANX.
I only copied his RAMDisk with his permission. Without it, I wouldn't be able to boot on the majority of ROMs.
The kernel source itself will be different from his indefinitely.
Wow, I am so lucky ☺
I will test it and let you know how is it. Thanks for replying.
Sent from my G2 running CloudyG3 on ART
Can't wait for the d800 PA release. Going to flip my ****.
Sent from my LG-D800 using XDA Premium 4 mobile app
@Amperific i flashed the kernel on CloudyG3 and I see that it has everything what @dorimanx kernel has... Also STweaks.
Sorry to say that, but for now it looks like the Dorimanx Kernel with other name
EDIT: not only STweaks. Governors, Hotplugs, etc, everything is the same, I think You should delete it for now. I think that STweaks can be used by everyone, but well, for now it looks like u copied his kernel and changed the name lol
reas0n said:
@Amperific i flashed the kernel on CloudyG3 and I see that it has everything what @dorimanx kernel has... Also STweaks.
Click to expand...
Click to collapse
Sigh. STweaks is from his ramdisk. And I'm reverting all his commits. by r5, Whatever I don't want won't be there.
Sent from my LG-D802 using Tapatalk
Please read up guides on what comes with a ramdisk and a zImage itself. A boot.img is made from a ramdisk and a zImage. Even though the STweaks app exists, it doesn't mean everything works. I don't have Intelli features inside. so use your eyes please. I'm trying to be kind and patient.
reas0n said:
@Amperific i flashed the kernel on CloudyG3 and I see that it has everything what @dorimanx kernel has... Also STweaks.
Sorry to say that, but for now it looks like the Dorimanx Kernel with other name
EDIT: not only STweaks. Governors, Hotplugs, etc, everything is the same, I think You should delete it for now. I think that STweaks can be used by everyone, but well, for now it looks like u copied his kernel and changed the name lol
Click to expand...
Click to collapse
Amp is a well known dev in the galaxy nexus forum (last that's where I know him and his work from) he's already stated he's using Dorimanx ram disk. So telling this guy to delete his thread is a **** move.
Sent from my LG-D800
YoungDaddy said:
Amp is a well known dev in the galaxy nexus forum (last that's where I know him and his work from) he's already stated he's using Dorimanx ram disk. So telling this guy to delete his thread is a **** move.
Sent from my LG-D800
Click to expand...
Click to collapse
Thank you.
But if you really don't appreciate my work, It's fine. I'll stop.
Not like I don't have other plans.
Anyways, Every development has its start. I admit. I have some dorimanx's commits. I'm reverting them currently till r5. Once we go past r5, I'll start working on pushing commits in.
If you see my development style in tuna, I do things part by part, in a systematic way.
YoungDaddy said:
Amp is a well known dev in the galaxy nexus forum (last that's where I know him and his work from) he's already stated he's using Dorimanx ram disk. So telling this guy to delete his thread is a **** move.
Sent from my LG-D800
Click to expand...
Click to collapse
You guys misunderstood me, meh. I didn't even say anything about the THREAD. It's the first one. The second one is, I just report to the dev what I see, I didn't say that it's a steal or anything, I just said that situation like that exists. Because i saw that there's everything like in dorimanx kernel, than maybe something went wrong with making the kernel.
Oh and about Intelli features, i see there are Intellidemand/Intelliactive govs, EcoMode, Intelli HotPlug, I REPORT it, REPORT, not ACCUSE.
Dang i hate misunderstandings. I appreciate every work and never want to make someone stop his work. Duh.
If dorimanx allowed to share everything with features he added like this now, then it's alright, I just reported in case he didn't allow it and You wouldn't see that or something.
So @Amperific keep going and sorry that u understood me wrong
Finally. We need more kernel devs. Thanks for joining the party!
Amperific said:
Thank you.
But if you really don't appreciate my work, It's fine. I'll stop.
Not like I don't have other plans.
Anyways, Every development has its start. I admit. I have some dorimanx's commits. I'm reverting them currently till r5. Once we go past r5, I'll start working on pushing commits in.
If you see my development style in tuna, I do things part by part, in a systematic way.
Click to expand...
Click to collapse
Keep on doing what you do bro. Can't wait to try some askp goodness on my d800 [emoji1]
Sent from my LG-D800
Sorry. Apologies from me too.
Next few builds,
- Mitigate commits that are not needed
- Bring in ASKP's tweaks
Sent from my LG-D802 using Tapatalk
Amperific, please don't stop your build. Coming from a gnex us users know your kernels are gold. I can't wait to try it out. I'm sure once non gnex users install the kernel they will see the magic. My request for you is a kernel that works with vanir on my d800. I'm a flashaholic so I jump from vanir, aicp, mahdi ect but just can't wait to try this bastard out??????
Sent from my LG-D800 using XDA Premium 4 mobile app
Guys before I sleep,
All Stock variants are up.
And I apologise about the CAF guide.
I briefly scanned through the source and realised that there are different variations of CAF. CMs, and etc. Even LG.
So all variations will be made available as well.
Nights
Do I need to go back on dalvik before flashing this kernel?
Currently i am on ART. If I stay on ART installation is the same? (wipe cache and dalvik then flash the kernel).
Thanks.
Sent from my G2 running CloudyG3 on ART
I was told that dalvik /ART is rom related not kernel
Sent from my VS980 4G using XDA Free mobile app

[ROM]Olympus Unofficial OmniROM4.4.4 PREVIEW test

Olympus Unofficial OmniROM 4.4.4 PREVIEW test​
This is a development thread .
This is a Omni4.4.4 firmware for Atrix. It's not a official Omni.
Quote:
Disclaimer: THIS FIRMWARE IS IN ALPHA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
This ROM uses the kernel 3.1.10, from Olympus Kernel Project:http://forum.xda-developers.com/showthread.php?t=2016837
WHAT IS WORKING?
ART
Bluetooth (Instable)
sound
wifi
need more testing...
WHAT ISN'T WORKING?
need more testing...
Battery statistics 100% Unknown
recovery(Thank Zn7mkUKzN1r8aCIV):
http://forum.xda-developers.com/showthread.php?t=2613829
ROM:The new
Wait until the restoration of some of the other bug, hope to help test.
ROM:201408062225
<s>http://d-h.st/iq6 </s>
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Thanks to all the users for using and debugging.report all bugs here,Thank
I'm fixing the digitizer of my second atrix, definitely i'm going to test it and help you with logs. Keep on the good work.
Best regards.
fengyr said:
Olympus Unofficial OmniROM PREVIEW test​
This is a development thread .
This is a Omni4.4.4 firmware for Atrix. It's not a official Omni.
Quote:
Disclaimer: THIS FIRMWARE IS IN ALPHA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
This ROM uses the kernel 3.1.10, from Olympus Kernel Project:http://forum.xda-developers.com/showthread.php?t=2016837
WHAT IS WORKING?
ART
Bluetooth
need more testing...
WHAT ISN'T WORKING?
WIFI (Unable to search)
Audio
need more testing...
recovery(Thank Zn7mkUKzN1r8aCIV):
http://forum.xda-developers.com/showthread.php?t=2613829
ROM:http://d-h.st/Dgo
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Thanks to all the users for using and debugging.report all bugs here,Thank
Click to expand...
Click to collapse
Way cool, will backup can test what's listed as working and see if i can find more of what's not working.
Thanks
Has changed the default language en_US.Update rom url
Not bad!
So I gave this test ROM a try. It's nice to see KitKat running on an Atrix 4G! I'm so excited to see some progress!
However, there are definitely several issues with it. The problems I found are:
Calls/text doesn't work
Mobile data doesn't work (says AT&T 4G but no connection)
SuperSU doesn't appear to work (crashed when opening and wouldn't let an app have root access)
Bluetooth didn't turn on for me (but I see you seemed to get it working, maybe it was just bad luck)
No WIFI (doesn't scan as you stated in the post)
Couldn't test any apps or camera because I couldn't restore my apps without root, and the camera must be a part of gapps now, which I also didn't install.
I was also gonna post some screenshots but it wouldn't let me snapshot (said storage error?)
Just thought I would sum up my experience so far. Thanks for letting us test out this promising new ROM! :good:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
thecjan said:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
Click to expand...
Click to collapse
K's kernels are CM9 and CM10.1 based. This is a CM11 based kernel with a build date of 6 Aug 14
Calls - No go
BT (file transfer) - Go
Wifi - same as OP reported
Battery - same as OP reported (There's no way that after 8 hrs it should still be at 100%)
Speakers/Headphones - No go
Apollo/DSP Manager - Crash
Ravilov's Battery Fix app - scripts not able to be executed
Thanks!!!
Mobile data seems to be working, Bluetooth and superuser. ART included, I'll do more testing later.
thank for the rom!
thecjan said:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
Click to expand...
Click to collapse
Don't be harsh to K, as I was fixing audio segfault in CM 4.4.4, the more I realized most of the audio problem (like Skype, Bluetooth error) is more ROM related than Kernal related. Most of them are due to incompatiblity of hardware HAL files in our unfinished Moto's 4.0 rom...... Of course Mobile Data HAL is sill PAIN IN THE AXX... ...
Zn7mkUKzN1r8aCIV said:
Don't be harsh to K, as I was fixing audio segfault in CM 4.4.4, the more I realized most of the audio problem (like Skype, Bluetooth error) is more ROM related than Kernal related. Most of them are due to incompatiblity of hardware HAL files in our unfinished Moto's 4.0 rom...... Of course Mobile Data HAL is sill PAIN IN THE AXX... ...
Click to expand...
Click to collapse
And what about to use - for now - the old kernel like epinter's CM10?, in XOOM kitkat they use and old 2.x kernel too, the hardware acceleration its not really a problem compared to use and unfinished kernel with more issues to solve.
Anyway we agree that Kristianp is doing it's best work to continue developing the 3.1 kernel, so any negative comentary should not be allowed as most of us are only users and some cooperate with minimal things.
I could boot my second atrix, now time to BL Unlock, root, etc and it's ready to test some KK roms.
It's great to see the "4.4.4" in the settings
Mobile internet works fine.
Kitkat feels quite snappy on this "too old, too slow" hardware.
Thank you so much for keeping the Atrix alive.
Will try to install the Play Store and test out some apps!
cannot wait to try this!
Booted up fine and looks slick. had to do some searching around to find how to switch to ART.
Also had to use Z's recovery_4.3.img... ROM won't install with TWRP.
Wish I could do more testing like battery but it's not feasible at the moment.
Looking forward to other releases to test.
Really love the tons of options available in KK.
phoenixgfx said:
Booted up fine and looks slick. had to do some searching around to find how to switch to ART.
Also had to use Z's recovery_4.3.img... ROM won't install with TWRP.
Wish I could do more testing like battery but it's not feasible at the moment.
Looking forward to other releases to test.
Really love the tons of options available in KK.
Click to expand...
Click to collapse
Which version of TWRP?
palmbeach05 said:
Which version of TWRP?
Click to expand...
Click to collapse
I think 2.6... not so sure.
TWRP 2.6.3 gives errors and aborts installation.
phoenixgfx said:
I think 2.6... not so sure.
Click to expand...
Click to collapse
Basmatek said:
TWRP 2.6.3 gives errors and aborts installation.
Click to expand...
Click to collapse
I believe, based off of what i've seen, 2.6.3.0 is the minimum to flash 4.4 ROMs, but 2.7 is reccommended.
Sent from my MB886 using xda app-developers app
There's no 2.7 for Atrix and apparently there's also no 4ext Recovery, so the only ways are CWM or Z's recovery (will try Z's on Monday or Tuesday)
Sent from my Nexus 7 using XDA Free mobile app
Thank friends test feedback .
Apply a new job,computer is not in my city, so the update rate slow down (my technique is limited).
I look forward to Z 4.4.4
please forgive my terrible english.
Please upload it to a diferrent pleace

Unofficial CM12.1 Rom

I am not responsible for you bricking your phone. If you blame me I will laugh at you.
This is one of my first Rom so go easy on me
Download Link - CM 12.1/Android 5.1.1:
Update CM 12..1 05/01 -
LINKS REMOVED BY MOD
Instructions:
Flash ROM(Link above)
BaNkS GAPPS - GAPPS
Donations
Please donate to keep this project alive!! It costs to maintain the hardware, Internet for the frequent updates and various fixes
Change log for 05/01 Build:
Android 5.1.1_r1
Stable Camera
USB OTG Update - This will make OTG super stable - This will be part of next release
Reboot Fix
CM Code Catch-up
Bluetooth updates
Memory optimisation
New CM SMart Dialer
Return of Silent mode
Silent mode toggle
CM File Manager update - I am not sure if anyone uses this
MMS Updates
Time to switch back to nuplayer
Things which are broken:
You tell me
*NewCM team have introduced couple of new apps which are included in this build. Check the build for the surprise
Ignore the title of the download file I have to get that changed
XDA:DevDB Information
Lolli POP, ROM for the T-Mobile Samsung Galaxy S6
Contributors
supy99, matrixzone
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest bootloader
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-05-07
Last Updated 2015-05-07
reserved
also reserved
Your download link seems to be MIA.
First lesson, this should be in original development
Does this have the cyanogenmod kernel or did you build it around the s6 stock kernel?
Sweet. Will try when I get some time.
Omg this is AWESOME. I thought I'd have to wait ages to get CM back in my life lol Supy any bugs or things that do t work we should know about?
Don't get to excited guys....
mikeyinid said:
Don't get to excited guys....
Click to expand...
Click to collapse
Why not?
ethan.r.besbris said:
Why not?
Click to expand...
Click to collapse
Here is all the threads the OP has started. http://forum.xda-developers.com/search.php?searchid=364211818
His github is non-existent. IF he does have a mostly working build of CM, he's using someone elses trees.
mikeyinid said:
Here is all the threads the OP has started. http://forum.xda-developers.com/search.php?searchid=364211818
His github is non-existent. IF he does have a mostly working build of CM, he's using someone elses trees.
Click to expand...
Click to collapse
Well that's f*king depressing... What a turd.
ethan.r.besbris said:
Well that's f*king depressing... What a turd.
Click to expand...
Click to collapse
Naw, it's cool. HERE is something to get excited about ~~~>https://github.com/BMc08GT?tab=repositories
So this is a no-go?
mikeyinid said:
Naw, it's cool. HERE is something to get excited about ~~~>https://github.com/BMc08GT?tab=repositories
Click to expand...
Click to collapse
Kernel source for the Exynos processor?
I thought Samsung kept that hush-hush?
mikeyinid said:
Naw, it's cool. HERE is something to get excited about ~~~>https://github.com/BMc08GT?tab=repositories
Click to expand...
Click to collapse
explain what that means
Sent from my SM-G920T using Tapatalk 2
FroBreadCreamJellyPie said:
Kernel source for the Exynos processor?
I thought Samsung kept that hush-hush?
Click to expand...
Click to collapse
It means BmC is actively working on it. I didn't know he and @eousphoros were working together, but I know if BmC is working on it, we'll have something sooner than later. I noticed slayher is working on it too. Haven't seen him around for a while but he knows his **** too.
dkotoric said:
explain what that means
Sent from my SM-G920T using Tapatalk 2
Click to expand...
Click to collapse
mikeyinid said:
It means BmC is actively working on it. I didn't know he and @eousphoros were working together, but I know if BmC is working on it, we'll have something sooner than later. I noticed slayher is working on it too. Haven't seen him around for a while but he knows his **** too.
Click to expand...
Click to collapse
sweet thanks
Sent from my Galaxy S6
mikeyinid said:
It means BmC is actively working on it. I didn't know he and @eousphoros were working together, but I know if BmC is working on it, we'll have something sooner than later. I noticed slayher is working on it too. Haven't seen him around for a while but he knows his **** too.
Click to expand...
Click to collapse
Slayer, BmC, and myself have been poking at it since launch. Most of our work has been going on thru emails or irc. The next couple weeks should be interesting. Right now we are fighting a framebuffer issue, once we have that resolved things will start moving faster.
eousphoros said:
Slayer, BmC, and myself have been poking at it since launch. Most of our work has been going on thru emails or irc. The next couple weeks should be interesting. Right now we are fighting a framebuffer issue, once we have that resolved things will start moving faster.
Click to expand...
Click to collapse
You're working with pretty good company. Can't wait til you guys break through the framebuffer issue and things get rolling.
mikeyinid said:
You're working with pretty good company. Can't wait til you guys break through the framebuffer issue and things get rolling.
Click to expand...
Click to collapse
More like they are working with good company but yeh. All three of us have solid experience with android and samsung in general. CM will happen eventually. Just keep in mind my original estimate of 9 months till stable release. (8 months left)

[ROM][H811][6.0.1]XenonHD for LG G4 (Weekly)

XENONHD 6.0.1 FOR T-MOBILE LG G4
NOTE: FOR BEST ROM EXOERIENCE, CHANGE ALL ANIMATIONS TO 1X IN DEVELOPER SETTINGS. THIS SHOULD LOCK YOU AT A 60FPS EXPERIENCE.
XenonHD is an AOSP-based Android ROM that combines speed, simplicity, and latest technology to bring you the best Android experience possible. XHD is AOSP-based, as opposed to CM-based, which gives it an advantage in speed and lightweightness (?). You can find the link to XenonHD's website HERE.
Installation Instructions (we assume bootloader is unlocked and recovery is installed. This is XDA):
1) Download 20I bootloader HERE
2) Download latest stable build from DevDB downloads section.
3) Download OpenGAPPS from HERE (arm64/whatever package. I use super.)
4)Move all 3 files to SD Card or Internal Storage
5) Boot into recovery and take backup (backup optional)
6) Flash bootloader, ROM, GAPPS, and (optionally) Xposed.
7) Reboot.
DOWNLOADS CAN BE FOUND IN THE DEVDB DOWNLOADS SECTION
GAPPS (arm64)
KNOWN ISSUES
-None yet. You tell me?
SOURCES:
Kernel: https://github.com/CyanogenMod/andro...el_lge_msm8992
G4 common device tree: https://github.com/CyanogenMod/andro..._lge_g4-common
Proprietary files: https://github.com/TheMuppets/proprietary_vendor_lge​
XDA:DevDB Information
[ROM][H811][6.0.1]XenonHD for LG G4 (Weekly), ROM for the LG G4
Contributors
bradym512, codeworkx, genesixxbf3
Source Code: https://github.com/TeamHorizon/platform_manifest
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 20i Bootstack
Based On: AOSP/XenonHD
Version Information
Status: Stable
Current Stable Version: XenonHD-02-18-16
Stable Release Date: 2016-02-18
Current Beta Version: -
Beta Release Date: 1969-12-31
Created 2016-02-20
Last Updated 2016-02-19
So far so good. Clean install,running smooth. Camera is working. No green lines. No issues as of now only time will tell I've noticed in other aosp ROMs within time it eventually starts lagging. Will use this as my daily ROM and report back with any issues. Great job
will there be some love for h815 ?
Gesendet von meinem LG-H815 mit Tapatalk
Never thought the day would come when the H11 gets a aosp ROM before the H15, the golden days of the g4 are truly upon us people! ROM is running great on fresh install ����
vitök said:
will there be some love for h815 ?
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
Unfortunately, I don't own or have an H815, and I won't do blind builds. The H811 is my personal device I own through T-Mobile.
raphi809 said:
Never thought the day would come when the H11 gets a aosp ROM before the H15, the golden days of the g4 are truly upon us people! ROM is running great on fresh install ����
Click to expand...
Click to collapse
And glad to hear it's working well!
For all, any input on which ROM I should work to support for the '11 next? Or stick to maintaining this one?
bradym512 said:
And glad to hear it's working well!
For all, any input on which ROM I should work to support for the '11 next? Or stick to maintaining this one?
Click to expand...
Click to collapse
The only think I could tell you is that if you'll build Pure Nexus or Chroma for 811 and not for 815 I will suicide.... :crying::crying::crying:
predek said:
The only think I could tell you is that if you'll build Pure Nexus or Chroma for 811 and not for 815 I will suicide.... :crying::crying::crying:
Click to expand...
Click to collapse
I am really sorry but... I was thinking of going after Chroma. If the 811 goes well I might seek a dev that can send me an 815 to work on. My only concern is that I'm going to need to write a REALLY long dependencies file to go with all the optimizations etc Nexus roms are missing (or im just lazy).
Sent from my LG-H811 using Tapatalk
bradym512 said:
I am really sorry but... I was thinking of going after Chroma. If the 811 goes well I might seek a dev that can send me an 815 to work on. My only concern is that I'm going to need to write a REALLY long dependencies file to go with all the optimizations etc Nexus roms are missing (or im just lazy).
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
It would be great..
Chroma and Pure Nexus are probably the best ROM in terms of balance between features and performance. But.. Are you sure that Zephik will allow someone to build for a non nexus device? I rember problems for Flo unofficial building, can't imagine a G4 build...
By the way.. It seems that I have to sell my 815 for 811!!!!
predek said:
It would be great..
Chroma and Pure Nexus are probably the best ROM in terms of balance between features and performance. But.. Are you sure that Zephik will allow someone to build for a non nexus device? I rember problems for Flo unofficial building, can't imagine a G4 build...
By the way.. It seems that I have to sell my 815 for 811!!!!
Click to expand...
Click to collapse
Haha since you said that I read up on Chroma. It sounds like ZephiK isn't the nicest person around. But, if it's open source I can't imagine he'd have any ammo to prevent me from building. What do you think?
Sent from my LG-H811 using Tapatalk
bradym512 said:
Haha since you said that I read up on Chroma. It sounds like ZephiK isn't the nicest person around. But, if it's open source I can't imagine he'd have any ammo to prevent me from building. What do you think?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
I think that Pure Nexus maybe would be easier.. Dev seems to be more friendly.
Even if personally I prefer Chroma but in the end they are really similar (Kang project!!)!
predek said:
I think that Pure Nexus maybe would be easier.. Dev seems to be more friendly.
Even if personally I prefer Chroma but in the end they are really similar (Kang project!!)!
Click to expand...
Click to collapse
That's what I'm thinking too. Really an end user can't complain about Kangs though. As long as it's not the one and only laggy buggy mess that is THE AOKP. Seriously the H811 port of AOKP is so laggy it's unbelievable. I might start Pure Nexus tomorrow then. I tried starting PAC ROM. It didn't like me.
Sent from my LG-H811 using Tapatalk
I'm on my phone. I wanna give this a shot but can't find the download link....Idk what the devdb section is...or how to find it.
pychobj2001 said:
I'm on my phone. I wanna give this a shot but can't find the download link....Idk what the devdb section is...or how to find it.
Click to expand...
Click to collapse
Wait... What's on your phone? Give wat a shot? WAT.
Sent from my LG-H811 using Tapatalk
bradym512 said:
Wait... What's on your phone? Give wat a shot? WAT.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
I'm sorry...that wasn't very clear. I'm using the XDA app on my phone and I can't find the download link. I thought maybe that's why I can't see the download link.
Oh. Yeah I should put an androidfilehost link too. On your computer just above the OP there should be a "Downloads" tab.
Sent from my LG-H811 using Tapatalk
bradym512 said:
That's what I'm thinking too. Really an end user can't complain about Kangs though. As long as it's not the one and only laggy buggy mess that is THE AOKP. Seriously the H811 port of AOKP is so laggy it's unbelievable. I might start Pure Nexus tomorrow then. I tried starting PAC ROM. It didn't like me.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Nice to hear that!
When you'll ready I'll try to find someone to make your ROM work on 815 also.
Thank you mate, really hope that something good is coming!
thanks
predek said:
Nice to hear that!
When you'll ready I'll try to find someone to make your ROM work on 815 also.
Thank you mate, really hope that something good is coming!
Click to expand...
Click to collapse
I do too! I was also project maintainer on the CM12.1 on the G Stylo, but this and XHD will be my first projects I've done on my own. And it sounds like PN is going to present a few challenges. Sounds fun??
Sent from my LG-H811 using Tapatalk
This looks very interesting and minimal. Might have to flash it and give it a try soon. I also vote that this be moved to the 811 section if there's no support for 815. Its not abandoned at all, just less users compared to the international 815.

Categories

Resources