Database Develop

[TUT]Official Gingerbread 2.3.6 05.05.2012 GalaxyMini s5570~ODIN~UPDATED

Hi guys i'd searched this forum but i didnt found a direct link on who to update the Galaxy mini to Android 2.3.6 aka gingerbread.So i did a lil google searching and i have found 2 methods.Correct me if this is already posted here,i'm just trying to help.And sorry for my eng. SAY THANKS IF YOU LIKE MY SUPPORT
ATTENTION!!! I'M NOT RESPONSABLE FOR ANY DAMAGE THAT YOU MAY CAUSE TO YOUR PHONE,DO IT ON YOUR OWN RISC!!THOSE FIRMWARE ARE FROM THE EUROPEAN OFFICIAL UPDATES,THEY WONT WORK FOR ASIA/AUSTRALIA!(i didnt test it)
You dont have to root your phone for any of those two methods.
THE LATEST ROM IS THE ONE FROM THE FIRST METHOD OF FLASHING!
You will need: -A WINDOWS XP,VISTA,SEVEN machine
-NET COMPACT FRAMEWORK 2.0
-USB CABLE AND THE S5570 ,doh!
First Method(4 files mode) ANDROID 2.3.6 updated 05.05.2012
1) Download this version of Odin from HERE
2) Download and install KIES from HERE (if u allready got Kies pass this step),we need KIES for the latest USB drivers
3) Download the firmware from HERE extract it
4) Download OPS file from HERE
5) Make shure that your phone is 70% charged
6) Turn off your phone
7) Now enter ODIN,you will something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8) Load the OPS file that you have just downloaded by clicking OPS on Odin and select TASS_v1.0.ops
9) Now from the firmware that you have extract it(THIS IS THE MOST IMPORTANT PART)
-APBOOT_S5570XWKTN_CL1019135_REV02_user_low_true.tar.md5 goes into BOOT
-MODEM_S5570XWKT6_CL1000416_REV02.tar.md5 goes to PHONE
-CODE_S5570XWKTN_CL1019135_REV02_user_low_true.tar.md5 goes to PDA
-and GT-S5570-MULTI-CSC-OXXKTB_RST.tar.md5 to CSC
MAKE SURE THAT YOU GET IT RIGHT!!!
10) Enter Downloading Mode,press VOLUM DOWN ,OK BUTTON, POWER BUTTON AT THE SAME TIME!
11) Connect the USB cable,now in Odin at COM PORT MAPPING is should appeare the USB cable as connected(COM1,COM2 etc)
12) Now make shure the in ODIN the only boxes that are checked are AUTO REBOOT , RESET TIME and PROTECT OPS after you have checked press START,now u have to wait 5-6min.
13) It must say above the COM connection PASS on a blue backgroud to disconnect the USB cable and u are done.!!EVEN IF THE PHONE BOOTS UP DON'T DISCONNECT THE USB CABLE,WAIT FOR THE PASS SCREEN!!
METHOD 2(1 file MODE) ANDROID 2.3.6 Updated 09.02.2012
1) I guess now u got ODIN and KIES(look in the post above),and your phone haves 70% battery
2) Turn off your phone
2) Now we gonna download the 2.3.6 firmware from HERE and extract it.
3) Then we download the OPS from BENI OPS (ATTENTION! IF IS NOT WORKING WITH BENI OPS USE TASS OPS) we gonna load the file and we have to check the option ONE PACKAGE then we click the ONE PACKAGE button below and select the file from the folder that we just downloaded/extracted SS5570XWKTZ_S5570XWKT9_S5570OXFKT5_RST_HOME.tar.md5,the only options that should be checked are ONE PACKAGE,RESET TIME,AUTO REBOOT,PROTECT OPS
4) DO A FACTORY RESET,DONT FORGET!!! AND REMOVE DE SD CARD (you must do this to avoid errors,but isnt a Must )
5) Enter Downloading mode,explained above is the 1st method,connect the USB cable,and wait for ODIN to connect to your phone COM port(see above),press START button.
6) Wait 5min..wait for the PASS screen (like above),disconnect the USB and you are all done.
THANKS TO: http://droidangel.blogspot.com and http://www.sammobile.com

done editing the links

Nice..i'll try to advertise this tutorial a little
Edit: Just recheck if every step is perfect.

roofrider said:
nice..i'll try to advertise this tut a little
Edit: just recheck if every step u've posted is perfect...cuz there mite be a few noobs here. n if something goes wrong,then it's trouble
Click to expand...
Click to collapse
the steps are right,but i dont know why sometimes the images in the tutorial dont apare ,u have to reload the page

TNX a LOT
NICE DONE ! installed and working step 1 !

dulladin said:
NICE DONE ! installed and working step 1 !
Click to expand...
Click to collapse
np mate

Everyone shud know,kpk is the latest f/w.

roofrider said:
Everyone shud know,kpk is the latest f/w.
Click to expand...
Click to collapse
yes,from the second method that's the latest one.

Updated
Sent from my GT-S5570 using XDA App Premium

Nice idea, man.
when newbie unable to follow these steps correctly & carefully, that's when they brick their phone.

yes,but that's not my business

is this rom compatible with the galaxy q one?

which is the best and safest method?

eggowaffle said:
is this rom compatible with the galaxy q one?
Click to expand...
Click to collapse
Only Galaxy Mini
Sent from my GT-S5570 using xda premium

heatledger said:
which is the best and safest method?
Click to expand...
Click to collapse
The second method comes with an updated firmware version ,and the first one is an older version... bouth are "save".Save as in, if you respect the steps if you dont you may BRICK YOUR PHONE.I'd tested the first and the second method with succes!
Sent from my GT-S5570 using xda premium

added a vote pull.

some guys are telling me that next month we'll get 2.3.5

Installed using One package method using the latest firmware. Worked fine, no problems whatsoever. As a reference it lasted 5:17 in ODIN. If you do factory reset after update, default language is Russian, but English and many more are included.
Thanks dany547 for the nice and simple guide.

Am reusit numai cu prima varianta, am inceput cu al doilea, dar dupa restartare a aparut numai logo-ul Samsung, si tot repornea dupa 20-30 secunde. Cu prima varinata merge foarte bine. Mersi
PS. In viitor pot sa updatez telefonul cu KIES dupa ce am facut updateul cu ODIN?

Im trying do download the ops file, but when i click on it my firefox open the file. what i can do to download it???

[TUTORIAL]4.0.3_ICS_I9100G(I have tried myself)

Bad news:
It seems that this method don't work well on 9100G sold in other countries,but I believe there's a way to install......
Many people have seen this:
http://forum.xda-developers.com/showthread.php?t=1620772
the link is no longer available and some people said they got boot loop
Here's an available link:
115.c好om/fil好e/dpku好ygao（Please remove the Chinese characters）
press the green button named 普通下载,and then the download should start
here's the Tutorial:
bbs.好gfan.com/好android-4100好076-1-1.好html（Please remove the Chinese characters,I hope you can understand it by using google translation）
here's the translation(only important,necessary steps)
First of all: DON'T FORGET to BACK UP your photos and other files!!!!!
Step1:install samsung kies
Step2:turn off USB debug
Step3:turn off your phone and enter download mode
Step4:run Odin3 v1.85.exe
Step5:make sure your phone are well connected to your PC
Step6:
load the files as follows:
PIT: omap4_all_20110627_CHN_OPEN_emmc.pit
BOOTLOADER: I9100G_APBOOT_I9100GZCLP5_CL440504_REVr07_user_low_ship.tar.md5
PDA: I9100G_CODE_I9100GZCLP5_CL440504_REVr07_user_low_ship.tar.md5
PHONE: MODEM_I9100GZCLP5_REV_00_CL1130849.tar.md5
CSC: GT-I9100G-MULTI-CSC-OZHLP5.tar.md5
TICK:Re-partition auto-reboot F.ResetTime
DON'T TICK OTHER OPTIONS AND KEEP THEM AS DEFAULT!!!
Step7ress Start button
I got boot loop,just removed battery(bad for phones?),and then turn on the phone,and it works well
Here's a way to add google market,face unlock,CWM and root:
bbs.好gfan.com/好android-4112032-1-1.好html（Please remove the Chinese characters,I'll translate if I'm free tomorrow......）
PS:
It works well in China,but I can't ensure it is also available on 9100G sold in other countries........
I hope you can understand my English

Did u managed to install it?can boot or not?if can can u do a backup through cwm?
Sent from my GT-I9100G using Tapatalk 2

fauzi_91 said:
Did u managed to install it?can boot or not?if can can u do a backup through cwm?
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
yes,absolutely
I flash cwm,but it seems that it will be removed after restart.......I have to install it through offcial recovery before use

From what I understand,you are now running ICS...can you make a backup with CWM and upload it to us ? I think this way,people who don't live in china can use it too..Worth a try.

Probably, but mostly can't work, different hardware (touch button at least) .

谢谢你,我今晚关掉usb debugging再试试
Thanks for your information , I will try tonight by closing the usb debugging

does it have english or is it chinese only?and will it work for europe?

hanny562 said:
谢谢你,我今晚关掉usb debugging再试试
Thanks for your information , I will try tonight by closing the usb debugging
Click to expand...
Click to collapse
waiting for your ICS Custom ROM & Kernel ~

I had flash the room too. Got a loop boot, but not same as u.
When I flashed and boot at first time, It worked OK.
But if I remove battery or do a cold reboot, It went into loop boot at first S screen.

ironman123 said:
does it have english or is it chinese only?and will it work for europe?
Click to expand...
Click to collapse
chinese only,you can try google translate

happyd said:
I had flash the room too. Got a loop boot, but not same as u.
When I flashed and boot at first time, It worked OK.
But if I remove battery or do a cold reboot, It went into loop boot at first S screen.
Click to expand...
Click to collapse
I have translate important steps,you can try it again........
The worst thing is that this ROM is only for 9100G sold in China

Madarox said:
From what I understand,you are now running ICS...can you make a backup with CWM and upload it to us ? I think this way,people who don't live in china can use it too..Worth a try.
Click to expand...
Click to collapse
yes,I am now running ICS.
But I don't think this will works,because not only the ROM changes,but also the modem,PIT,CSC and partition
so if you only restore ROM,it may not works

happyd said:
I had flash the room too. Got a loop boot, but not same as u.
When I flashed and boot at first time, It worked OK.
But if I remove battery or do a cold reboot, It went into loop boot at first S screen.
Click to expand...
Click to collapse
I don't fully understand you......
Did you running ICS normally only after flashing it,but failed after you remove the battery?

xuplastic said:
I don't fully understand you......
Did you running ICS normally only after flashing it,but failed after you remove the battery?
Click to expand...
Click to collapse
yes.
I reported here.
bbs点gfan点com/android-4112818-1-1.html

DeoXCodeX said:
Probably, but mostly can't work, different hardware (touch button at least) .
Click to expand...
Click to collapse
That's just a misconception caused by some pictures floating around that was made with a screenshot software that put a different casing on the phone. All the Chinese I9100G variants have the same button layout as all the others around the world.

ICS now official released in some countrys ...sorce sammobile . Com
Sent from my GT-I9100G using xda premium

xuplastic said:
Many people have seen this:
http://forum.xda-developers.com/showthread.php?t=1620772
the link is no longer available and some people said they got boot loop
Here's an available link:
115.c好om/fil好e/dpku好ygao（Please remove the Chinese characters）
press the green button named 普通下载,and then the download should start
here's the Tutorial:
bbs.好gfan.com/好android-4100好076-1-1.好html（Please remove the Chinese characters,I hope you can understand it by using google translation）
here's the translation(only important,necessary steps)
First of all: DON'T FORGET to BACK UP your photos and other files!!!!!
Step1:install samsung kies
Step2:turn off USB debug
Step3:turn off your phone and enter download mode
Step4:run Odin3 v1.85.exe
Step5:make sure your phone are well connected to your PC
Step6:
load the files as follows:
PIT: omap4_all_20110627_CHN_OPEN_emmc.pit
BOOTLOADER: I9100G_APBOOT_I9100GZCLP5_CL440504_REVr07_user_low_ship.tar.md5
PDA: I9100G_CODE_I9100GZCLP5_CL440504_REVr07_user_low_ship.tar.md5
PHONE: MODEM_I9100GZCLP5_REV_00_CL1130849.tar.md5
CSC: GT-I9100G-MULTI-CSC-OZHLP5.tar.md5
TICK:Re-partition auto-reboot F.ResetTime
DON'T TICK OTHER OPTIONS AND KEEP THEM AS DEFAULT!!!
Step7ress Start button
I got boot loop,just removed battery(bad for phones?),and then turn on the phone,and it works well
Here's a way to add google market,face unlock,CWM and root:
bbs.好gfan.com/好android-4112032-1-1.好html（Please remove the Chinese characters,I'll translate if I'm free tomorrow......）
PS:
It works well in China,but I can't ensure it is also available on 9100G sold in other countries........
I hope you can understand my English
Click to expand...
Click to collapse
Do you have any other link? I can't down load from this link, the speed very slow !

mohannad072 said:
ICS now official released in some countrys ...sorce sammobile . Com
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
It's bull****. Some site posted that wrong info earlier and many people took the info without checking if it was true and posted it on various sites. ICS has not been released in any countries yet though.

Do you see this image from: http://bbs.gfan.com/android-4100076-1-1.html
PRODUCT NAME: GT-i9100G_CHN_CHN
But this My product name is: GT-i9100G And u ?
What's different?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mohannad072 said:
ICS now official released in some countrys ...sorce sammobile . Com
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Not true...
Sammobile have no update for G version.

[Q] stock rom

I downloaded stock gingerbread rom from Sammobile.. DDLK2 Indian .version ..before that i was using CM 10.2. when i extracted .stock rom .i got one . .MD5 file .. i select it in PDA section .. when process complete ..i disconnected phone.. after that phone failed to boot .. i failed to access recovery also ..thank god download mode was working .. i flashed Jellybean again.. can anybody tell me why it happened ?:crying:

Heartstoler1991 said:
I downloaded stock gingerbread rom from Sammobile.. DDLK2 Indian .version ..before that i was using CM 10.2. when i extracted .stock rom .i got one . .MD5 file .. i select it in PDA section .. when process complete ..i disconnected phone.. after that phone failed to boot .. i failed to access recovery also ..thank god download mode was working .. i flashed Jellybean again.. can anybody tell me why it happened ?:crying:
Click to expand...
Click to collapse
You need to use guide for downgrade, it is in our general section I think. Just flashing your gb fw will cause that what you got.
Sent from my GT-I9070 using Tapatalk

shut_down said:
You need to use guide for downgrade, it is in our general section I think. Just flashing your gb fw will cause that what you got.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I know mate .. but there is only one md5 file of around 700 .mb. no other files like CSC , modem , PDA .,,

Heartstoler1991 said:
I know mate .. but there is only one md5 file of around 700 .mb. no other files like CSC , modem , PDA .,,
Click to expand...
Click to collapse
That is why you need to use this: http://forum.xda-developers.com/showthread.php?t=2195673
After that install your country GB.

shut_down said:
That is why you need to use this: http://forum.xda-developers.com/showthread.php?t=2195673
After that install your country GB.
Click to expand...
Click to collapse
I flashed it again on stock jb .. again same result .. with no recovery ... I think the zip that I have downloaded is corrupted .. need to download again

Heartstoler1991 said:
I flashed it again on stock jb .. again same result .. with no recovery ... I think the zip that I have downloaded is corrupted .. need to download again
Click to expand...
Click to collapse
You are not reading what am I writing. You can't downgrade like that, how you are doing. Go to that page and follow every step.
http://forum.xda-developers.com/showthread.php?t=2195673

shut_down said:
You are not reading what am I writing. You can't downgrade like that, how you are doing. Go to that page and follow every step.
http://forum.xda-developers.com/showthread.php?t=2195673
Click to expand...
Click to collapse
dude .. I read everything ..m using 16 gb version .. do I need to select pit file ? wat m doing wrong ? .. do I need to change the location of md5 file ?? means from PDA to CSC ? there is only one file

Heartstoler1991 said:
dude .. I read everything ..m using 16 gb version .. do I need to select pit file ? wat m doing wrong ? .. do I need to change the location of md5 file ?? means from PDA to CSC ? there is only one file
Click to expand...
Click to collapse
7)Now click on PDA button in ODIN and select CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5 file.
8)Now hit on CSC button and select CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5 file.
9)Hit on PIT button and select the PIT file extracted from the downloaded package in first step above (GT-I9070_EUR_XX_8G.pit).
You have all those files in all files.7z
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And do factory reset in recovery after that.
Send screenshot of Odin when you set those files.

[GT-I9295][OFFICIAL][ROM]5.0.1 Android Lollipop Update

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model: GT-I9295​
Android Version: 5.0.1​
Country: Finland​
Product Code: NEE​
PDA: I9295XXUDOB4​
CSC: I9295NEEDOB4​
Modem: I9295XXUDOB4​
Changelist: 4101211​
Download: Click me Or on Sammobile​
Instructions​
1.Download Odin 3.10
2. Download the Firmware of course.
3. Extract the Firmware/Zip
4. Boot your device into Flash mode/Download mode (Vol Down + Home + Power Button)
5. Open Odin and Put those extracted files there. In Odin, make sure the “Re-Partition” option is not ticked.
6. SMASH THAT START BUTTON AND MAKE A CUP OF TEA WHILE WAITING.
IT'S DONE WHEN YOU FINISHED YOUR CUP OF TEA​

and root?
How to root

mahferer said:
How to root
Click to expand...
Click to collapse
dont have this device.
process might be the same.
Download Tar file TWRP Recovery from here. http://forum.xda-developers.com/gal...recovery-official-twrp-2-8-0-0-touch-t2888383 download the latest one.
Download flashable supersu. google it lazy to search it for you lol.
put the tar file on AP and uncheck auto reboot. and flash it or press start.
boot into recovery. it should be TWRP.
flash the SuperSu flashable zip.
and done

Care to Share some screenshots for the notification

MiZoSpaDe said:
Care to Share some screenshots for the notification
Click to expand...
Click to collapse
Screenshots are all the same.
Sent from my GT-I9505 using XDA Free mobile app

another question does this make me lose my warranty if i upgraded from 4.2.2 to 5.0.1 mine is egy version which is still on jellybean -_- .. also does this rom support arabic reading + writing ?

Fast Mirror
Can anyone please put this file in a faster mirror?
The speed is only 50 kb/s and there are 9 hours reamainin' . Can anyone post in a fast mirror?
Thanks ^^. Somenoe already tested the firmware?
Sorry for my bad english.

the best rom great battery is fast fluid no lag you dont lose warnity and supports arabic of course saw it there it has better battery life than 4.4.2 and its perfect on overal performace

[/COLOR]
Androjoker said:
Can anyone please put this file in a faster mirror?
The speed is only 50 kb/s and there are 9 hours reamainin' . Can anyone post in a fast mirror?
Thanks ^^. Somenoe already tested the firmware?
Sorry for my bad english.
Click to expand...
Click to collapse
https://cloud.mail.ru/public/b0bcdc0542ce/I9295XXUDOB4_I9295NEEDOB4_NEE.zip
Thanks is for the Russians!

MiZoSpaDe said:
another question does this make me lose my warranty if i upgraded from 4.2.2 to 5.0.1 mine is egy version which is still on jellybean -_- .. also does this rom support arabic reading + writing ?
Click to expand...
Click to collapse
No. You wont lose your warranty since this is a official firmware. I Think this does have multilanguage for arabic. Etc.
Sent from my GT-I9505 using XDA Free mobile app

MiZoSpaDe said:
another question does this make me lose my warranty if i upgraded from 4.2.2 to 5.0.1 mine is egy version which is still on jellybean -_- .. also does this rom support arabic reading + writing ?
Click to expand...
Click to collapse
You won't lose your warranty as this is an official firmware. It has support for arabic language.
---
Successfully flashed the rom over CM12. Everything's working including WiFi, Mobile data, etc. I didn't lose any files; all my photos and videos are still there. However, you will lose your app data so better make a backup. If anyone's curious, here are the steps that I followed.
1. Download the firmware from sammobile. (Click)
2. Extract the downloaded file.
3. Run Odin (I used v3.09) as an Administrator.
4. If you're on a custom rom, reboot into recovery. Wipe user data and cache.
5. Reboot into Download mode.
6. Connect your phone via USB. Wait for the necessary drivers to install until Odin detects your phone.
7. Click on AP then browse to the extracted .tar.md5 file. Only Auto-Reboot and F.Reset Time should be checked.
8. Click Start and wait for everything to finish.
9. Once you see a PASS, you can now unplug your phone.

You who are running 5.0 with no problems, which countries are you from?

tpetran said:
You who are running 5.0 with no problems, which countries are you from?
Click to expand...
Click to collapse
Philippines. I was on CM12 on modem NI1 before flashing this.

propov said:
[/COLOR]
https://cloud.mail.ru/public/b0bcdc0542ce/I9295XXUDOB4_I9295NEEDOB4_NEE.zip
Thanks is for the Russians!
Click to expand...
Click to collapse
Oh Man thank u so much.

Turkey. Use for 3days and I didnt see any problem

ok i did install it and it says system status : Custom ... so i guess i lost my warranty or this is normal ? btw i'm from egypt

MiZoSpaDe said:
ok i did install it and it says system status : Custom ... so i guess i lost my warranty or this is normal ? btw i'm from egypt
Click to expand...
Click to collapse
You lose it when flashing root. But who needs it anyway.
Sent from my GT-I9505 using XDA Free mobile app

VIPNobie said:
Philippines. I was on CM12 on modem NI1 before flashing this.
Click to expand...
Click to collapse
Filipino whohoho lol
Sent from my GT-I9505 using XDA Free mobile app

romania. 4 days with no problem

Philippines here too!

installing stock official rom but it stuck

hello guys
i have flash a new official rom for my 920C , but thw wired thing that i cannot start it without installing custom kernel
i am coming from custom rom
how i can install the official kernel ?

Who said you can't flash stock without abc.
This is latest official PAC firmware, just download and flash.
https://drive.google.com/folderview?id=0B40ItdHKfkyQN0o4Sk9COG8xTzg&usp=sharing#list
Link credit: @Manh_IT,

Rsroms said:
Who said you can't flash stock without abc.
This is latest official PAC firmware, just download and flash.
https://drive.google.com/folderview?id=0B40ItdHKfkyQN0o4Sk9COG8xTzg&usp=sharing#list
Link credit: @Manh_IT,
Click to expand...
Click to collapse
sorry for misunderstand , but when i install official rom , the phone doesnot boot untill i install custom kernel
so should i use the Rom from the link you provide ? and what about the pit file?

new_world_2006 said:
sorry for misunderstand , but when i install official rom , the phone doesnot boot untill i install custom kernel
so should i use the Rom from the link you provide ? and what about the pit file?
Click to expand...
Click to collapse
It will boot, it takes 5 to 10 minutes on first boot. Just download the files from the link i gave you, extract the zip which will leave you 4 files in the end .i.e AP, CP, BL, CSC and pit. Just add them to their respective tabs in the ODIN and flash.
Sit back and have some coffee till it boots up (Y)

Rsroms said:
It will boot, it takes 5 to 10 minutes on first boot. Just download the files from the link i gave you, extract the zip which will leave you 4 files in the end .i.e AP, CP, BL, CSC and pit. Just add them to their respective tabs in the ODIN and flash.
Sit back and have some coffee till it boots up (Y)
Click to expand...
Click to collapse
thanks a lot , but when i see i think this is for Vitnam Rom N920CXXU2AOK7_N920COLB2AOK7_XXV_PAC.zip , should i worry about anything ? my note is KSA reigon

new_world_2006 said:
thanks a lot , but when i see i think this is for Vitnam Rom N920CXXU2AOK7_N920COLB2AOK7_XXV_PAC.zip , should i worry about anything ? my note is KSA reigon
Click to expand...
Click to collapse
No worries, I am using the same firmware here in KSA

Rsroms said:
No worries, I am using the same firmware here in KSA
Click to expand...
Click to collapse
Thanks , by the way , i already open another Question regarding the Mobile Network ISSUE , and also you tried to help
do you think if i use the PAC firmware this will help me fixing the issue of the Mobile Network ?

new_world_2006 said:
Thanks , by the way , i already open another Question regarding the Mobile Network ISSUE , and also you tried to help
do you think if i use the PAC firmware this will help me fixing the issue of the Mobile Network ?
Click to expand...
Click to collapse
Positive. All you have to do is to try/

Rsroms said:
Positive. All you have to do is to try/
Click to expand...
Click to collapse
i have used the PAC files , and till now the phone stuck on the first black and white Samsung note 5 screen , the same issue happened to me untill i install custome framware

new_world_2006 said:
i have used the PAC files , and till now the phone stuck on the first black and white Samsung note 5 screen , the same issue happened to me untill i install custome framware
Click to expand...
Click to collapse
Post the odin screen. Did it pass?

yup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
may be there is options i have to check ?

sorry my brother had the same problem with you like where you solve the problem ???

Official roms are single file you just add in AP section that's it
After finishing instal just wipe cache from recovery