*removed*
batakang ftp is down permanently.
link to my razr m stuff: https://drive.google.com/folderview?id=0B-53iD-71B3iX0dXU2FTYjRjN3M&usp=sharing
link to my razr hd stuff: https://drive.google.com/folderview?id=0B-53iD-71B3iZmRMT0x6dTlUU1k&usp=sharing
How to install your ROM? Instructions please.
BastaS said:
How to install your ROM? Instructions please.
Click to expand...
Click to collapse
How to flash a rom:
rooted:
install safestrap
open safestrap and install recovery
reboot and enter recovery (select recovery on safestrap splash screen)
make a backup (optional, recommended)
create a rom slot
wipe everything except internal and external storage
install rom
bootloader unlocked:
install custom recovery (twrp recommended)
reboot and enter recovery (press and hold volume up + power hard keys while booting)
make a backup (optional, recommended)
wipe everything except internal and external storage
mount system
install rom
can i flash it to the stock rom slot?
BastaS said:
can i flash it to the stock rom slot?
Click to expand...
Click to collapse
no
Q9Nap said:
no
Click to expand...
Click to collapse
Can someone tell me which files I should flash? Are any of these files full ROM zips or do I have to flash multiple zips? Or are these only for locked bootloaders? I'm unlocked.
Duckie1217 said:
Can someone tell me which files I should flash? Are any of these files full ROM zips or do I have to flash multiple zips? Or are these only for locked bootloaders? I'm unlocked.
Click to expand...
Click to collapse
you can flash any of the zips with "system" in the name; the names are self explanatory.
it isn't necessary to flash boot (but doesn't hurt) unless you are upgrading from an earlier stock build or coming from an aosp/cm/cm-variant build.
it isn't necessary to flash radio (but doesn't hurt) unless you are upgrading from an earlier stock build or have done the gsm hack and want to undo it.
Q9Nap said:
you can flash any of the zips with "system" in the name; the names are self explanatory.
it isn't necessary to flash boot (but doesn't hurt) unless you are upgrading from an earlier stock build or coming from an aosp/cm/cm-variant build.
it isn't necessary to flash radio (but doesn't hurt) unless you are upgrading from an earlier stock build or have done the gsm hack and want to undo it.
Click to expand...
Click to collapse
I tried one earlier but my device would just power back off after rebooting. I'll try another package.
Duckie1217 said:
I tried one earlier but my device would just power back off after rebooting. I'll try another package.
Click to expand...
Click to collapse
remember to mount system before installing the zip when using twrp/cwm.
Q9Nap said:
remember to mount system before installing the zip when using twrp/cwm.
Click to expand...
Click to collapse
I mounted the system. The screen keeps flashing over and over again. No boot animation. Kernel issue?
Duckie1217 said:
I mounted the system. The screen keeps flashing over and over again. No boot animation. Kernel issue?
Click to expand...
Click to collapse
what did you have installed before trying to flash? as i mentioned, if you're coming from a stock build prior to 98.30.1 or from aosp/cm, you need to flash the boot image. if you're not even getting to the bootanimation, this is likely the issue. if you're coming from an earlier stock build, you should also flash the radio. if you boot loop on the animation, you need to wipe data, cache, and dalvik cache.
Q9Nap said:
what did you have installed before trying to flash? as i mentioned, if you're coming from a stock build prior to 98.30.1 or from aosp/cm, you need to flash the boot image. if you're not even getting to the bootanimation, this is likely the issue. if you're coming from an earlier stock build, you should also flash the radio. if you boot loop on the animation, you need to wipe data, cache, and dalvik cache.
Click to expand...
Click to collapse
Oh, of course. Sorry about that. I'll update here.
Duckie1217 said:
Oh, of course. Sorry about that. I'll update here.
Click to expand...
Click to collapse
Did you have any Luck ?
I am having the same issues, coming from dhacker KK.
Gonna got back to clean stock and try again tomorrow.
Germanese said:
Did you have any Luck ?
I am having the same issues, coming from dhacker KK.
Gonna got back to clean stock and try again tomorrow.
Click to expand...
Click to collapse
Oh, yeah. I got it running. Works well. Just gotta follow those instructions. Not like a typical flash.
Germanese said:
Did you have any Luck ?
I am having the same issues, coming from dhacker KK.
Gonna got back to clean stock and try again tomorrow.
Click to expand...
Click to collapse
instructions added to op, hope this helps.
This rom hasn't massage app ?
And how i recive massage ?
kiba99 said:
This rom hasn't massage app ?
And how i recive massage ?
Click to expand...
Click to collapse
Handsent on play.
kiba99 said:
This rom hasn't massage app ?
And how i recive massage ?
Click to expand...
Click to collapse
if you know of a good massage app, i'd like to know what it is, especially if it gives happy endings lol.
if you mean "message" which i imagine you do, there are various messaging apps available on the play store, the most notable being google hangouts which now has sms integration.
the purpose of this rom is to remove all unnecessary apps that can be downloaded from the play store, so you're not stuck with a bunch of bloat that you don't want or need. there are replacements for the phone, contacts, camera, and gallery as well...
Just before I flash this, does Wifi Tether work? Has anyone tried it?
Thanks!
---------- Post added at 10:00 PM ---------- Previous post was at 09:10 PM ----------
Wi-Fi won't turn on for me after a clean install. Weird.
Sent from my Nexus 7 using xda app-developers app
Coronado is dead said:
Just before I flash this, does Wifi Tether work? Has anyone tried it?
Thanks!
---------- Post added at 10:00 PM ---------- Previous post was at 09:10 PM ----------
Wi-Fi won't turn on for me after a clean install. Weird.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
yes, wifi tether is unlocked, as mentioned in the op.
as for wifi, there's no reason it shouldn't work, as i didn't modify anything that has to do with it. i'd recommend wiping everything except internal and external storage, then flashing boot, system, and radio to ensure a clean install. please post if you still have issues after doing that.
Related
Hello peeps...
This is Pure Stock Image 4.4.3 from deodexed it and Converted to F2FS..
Lets first understand,
What is F2FS?
F2FS (Flash-Friendly File System) is a flash file system created by Kim Jaegeuk at Samsung for the Linux operating system kernel. The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
What is All-F2FS?
We used F2FS only for /data. It was simply because we have only to flash a compatible Kernel and Format /data partition. With All-F2FS we use F2FS for all partitions and we need a compatible ROM
Instructions :
Download compatible ROM
Download FormatPartitions.zip
Download "special" TWRP for All-F2FS: openrecovery-twrp-2.7.0.0-mako-All-F2FS.img
(This is different for that of simply F2FS)
Copy FormatPartitions.zip and ROM on Phone
Flash "special" TWRP with Fastboot
Flash FormatPartitions.zip with new Recovery
Reboot Recovery
Flash ROM with new Recovery
(Flash GApps with new Recovery)
Go to Wipe Menu and press Format Data (The Big BUTTON!) (You will LOSE all your Data! Music, Movies etc!!)
Reboot
Note : If you already on F2FS directly flash the zip and then Supersu from below link
Tested it..
All working fine..
Need to flash Supersu to retain root..
Downlaods
Link : Flashable Zip Folder - All Files
or
Flashable Zip - ROM
Mirror Link :
http://goo.gl/oQL9uD
Supersu : http://download.chainfire.eu/446/SuperSU/UPDATE-SuperSU-v1.99r3.zip
Wifi Fix : Wifi Fix
F2FS 4.4.3 Kernel : d-h.st/t34
Credits :
@is0l4ted - creating the F2FS version
@My Nexus 4 whatsapp group members..
@Rohit02(Me)
@CallMeAldy : Wifi Fix
Changelogs :
2014/06/03 : Initial Release
2014/06/04 : Fixed bootoop for some users. Fix zip included in the new link. (Old link removed)
Rohit02 said:
Hello peeps...
This is Pure Stock Image 4.4.3 from deodexed it and Converted to F2FS..
@My Nexus 4 whatsapp group members..
Click to expand...
Click to collapse
There's a Nexus 4 WhatsApp group?
Sent from my Nexus 4 using XDA Free mobile app
Rohit02 said:
Hello peeps...
This is Pure Stock Image 4.4.3 from deodexed it and Converted to F2FS..
Tested it..
All working fine..
Need to flash Supersu to retain root
Click to expand...
Click to collapse
I'm on stock with root, recovery and Xposed. Can I just flash the zip and root again without lose anything?
is there a big difference in speed with F2FS? any problems??
thx
Gr8 work @is0l4ted and @Rohit02 and all the Whatsapp Group members !! Really short on time but if possible will try flashing it tomm evening !!
ronakchavan said:
There's a Nexus 4 WhatsApp group?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm yes an amazing group
ttheodorou said:
is there a big difference in speed with F2FS? any problems??
thx
Click to expand...
Click to collapse
Many threads out there about f2fs its advantages and disadvantages !! Its faster in opening apps and boot times and improved io performance especially on dalvik !!
NABENDU1 said:
Many threads out there about f2fs its advantages and disadvantages !! Its faster in opening apps and boot times and improved io performance especially on dalvik !!
Click to expand...
Click to collapse
so in short it is a good upgrade for the phone. i think i will try it at some point
ok I flashed without wipe and now it's in bootloop. Uff I don't want to wipe everything
CWM ?
Is it compatible with TWRP only or can I flash it via CWM ?
Sorry Bro
gajira said:
ok I flashed without wipe and now it's in bootloop. Uff I don't want to wipe everything
Click to expand...
Click to collapse
Sorry Bro for the inconvenience.. here is the fix for your problem hope you didn't wiped again!!!
Hit Me to fix bootloop!! or Me!!
---------- Post added at 02:09 AM ---------- Previous post was at 02:03 AM ----------
spfc_jcp88 said:
Is it compatible with TWRP only or can I flash it via CWM ?
Click to expand...
Click to collapse
Only TWRP F2FS Version. To confirm that the back button on TWRP should be red in color.
is0l4ted said:
Sorry Bro for the inconvenience.. here is the fix for your problem hope you didn't wiped again!!!
Hit Me to fix bootloop!! or Me!!
---------- Post added at 02:09 AM ---------- Previous post was at 02:03 AM ----------
Only TWRP F2FS Version. To confirm that the back button on TWRP should be red in color.
Click to expand...
Click to collapse
thanks, I had a nandroid backup
Maybe that's the problem, I need a F2FS TWRP.
OP updated..
Enjoy
Can't seem to get my wifi working :/ Installer says it should be activated to view networks, but i cant activate it. If i skip the first install screen where you need to log into your google account etc, and then try to activate wifi in the settings menu nothing happens when i flip the switch :/
Did a clean install multiple times, but it just keeps on not working any fixes for this?
mumaster20 said:
Can't seem to get my wifi working :/ Installer says it should be activated to view networks, but i cant activate it. If i skip the first install screen where you need to log into your google account etc, and then try to activate wifi in the settings menu nothing happens when i flip the switch :/
Did a clean install multiple times, but it just keeps on not working any fixes for this?
Click to expand...
Click to collapse
Same here. Cannot activate wi-fi.
Can I have to install the new radio?
sychim said:
Same here. Cannot activate wi-fi.
Click to expand...
Click to collapse
flash new modem and baseband. If you change to the new android version google provides new binaries. If you haven't then maybe you're wifi won't work. Look in general section for modem baseband flashable.zip
or here:
http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
carepack said:
flash new modem and baseband. If you change to the new android version google provides new binaries. If you haven't then maybe you're wifi won't work. Look in general section for modem baseband flashable.zip
or here:
http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
Click to expand...
Click to collapse
Already got the new .02 baseband installed :/
To install this "special" recovery, which one of these commands is right?
Code:
fastboot flash boot filename.img
OR
Code:
fastboot flash recovery filename.img
Many thanks before...
omegahanggara said:
To install this "special" recovery, which one of these commands is right?
Code:
fastboot flash boot filename.img
OR
Code:
fastboot flash recovery filename.img
Many thanks before...
Click to expand...
Click to collapse
fastboot flash recovery filename.img
is the right way...
carepack said:
fastboot flash recovery filename.img
is the right way...
Click to expand...
Click to collapse
You're my hero.... :highfive:
omegahanggara said:
You're my hero.... :highfive:
Click to expand...
Click to collapse
no problem man
...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
This flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like TWRP/CWM) prevents me from using a PC,
If these zip flashes also the recovery back to stock, then we cant go back/revert back from Nandroid without a PC..
Just a simple question, but I put mu reasons why.. Heheh.
Thanks by the way for sharing the ROM..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________
yethz said:
this flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like twrp/cwm) prevents me from using a pc,
if these zip flashes also the recovery back to stock, then we cant go back/revert back from nandroid without a pc..
Just a simple question, but i put mu reasons why.. Heheh.
Thanks by the way for sharing the rom..
_________________________________________________
device: google nexus 4 (lg-e960) 16gb (mako)
rom: simpleaosp-l-rom (stable build 7)
kernel: stuxnet v4.5 (3.4.105)
gapps: pa-gapps-5.0.1-beta4 (mini)
________________________________________________
Click to expand...
Click to collapse
no, it does not
Can we get a different host? Its asking me to sign in through facebook/twitter/instagram etc if I want to download.
Thanks for the making it flashable though!
aidinvm_ultimate said:
no, it does not
Click to expand...
Click to collapse
I think it is necessary to remove recovery-from-boot.p from system
pincher65 said:
I think it is necessary to remove recovery-from-boot.p from system
Click to expand...
Click to collapse
this is safe to flash rom even without "recovery-from-boot" but all in all this Rom does not rewrite your current recovery
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
theo28 said:
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
Click to expand...
Click to collapse
Yes, as you said
aidinvm_ultimate said:
...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
Click to expand...
Click to collapse
Works exactly as mentioned and it took me about 9 minutes to reboot and maybe another 10 to do CF root. Good job!
Can I flash a custom kernel over this?
GorfDroid said:
Can I flash a custom kernel over this?
Click to expand...
Click to collapse
Yeap, you can treat It like any other rom, but for safty always do nandbackup of system before.
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
i'm getting battery usage data not available when i check the battery status in notifications
Many thanks
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
swimma said:
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
Click to expand...
Click to collapse
No,there is no radio included, you have to flash it desperately
mynickname said:
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
Click to expand...
Click to collapse
you're welcome bro
ankuzero said:
i'm getting battery usage data not available when i check the battery status in notifications
Click to expand...
Click to collapse
plz do wipe cache (or even factory reset if you come from custom rom), every thing is Ok here
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
aidinvm_ultimate said:
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
Click to expand...
Click to collapse
I tried the other stock Lollipop floating around and had the same issue. Ended up having to pull the image directly from Google. It's good to go now.
No other mods were flashed.
SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
I had the same issue.
I updated to the latest TWRP, I then factory wiped. cleaned cache, and dalvik.
Then installed this stock rom from scratch with the instructions here and it fixed the issue.
Give it another go...
I am trying to remember the exact details. But this was almost 2 weeks ago, and I might be missing a step?
Hope not...
hey everyone.
really just want to make sure im flashing this rom correct.
mainly because after i wipe everything. data system, exc.
when i go to reboot the device reboots, goes to Samsung galaxy note 4.
then turns off.. vibrates twice then goes back to the samsung galaxy note 4.
rom i am trying to flash is alliance v1.1
the rom i am coming from is the alliance tmobile beta
any info would help
thanks!!!
holt3113 said:
hey everyone.
really just want to make sure im flashing this rom correct.
mainly because after i wipe everything. data system, exc.
when i go to reboot the device reboots, goes to Samsung galaxy note 4.
then turns off.. vibrates twice then goes back to the samsung galaxy note 4.
rom i am trying to flash is alliance v1.1
the rom i am coming from is the alliance tmobile beta
any info would help
thanks!!!
Click to expand...
Click to collapse
Dont wipe system after you flash the ROM. Only wipe cache. If you wipe system you are earasing the ROM.
Sent from my SM-N910T using XDA Free mobile app
Help!
Did you end up figuring this out? I've just had the same thing happen to me!
This build is a COD6..
have you folks updated your bootloader and modem???
If your flashing the partial firmware using odin.. then you need to boot directly into recovery and flash the Rom.
Please post a screen shot of "about device" so i can see your baseband..
Sent from my SM-N910T using Tapatalk
Flashvetrin said:
This build is a COD6..
have you folks updated your bootloader and modem???
If your flashing the partial firmware using odin.. then you need to boot directly into recovery and flash the Rom.
Please post a screen shot of "about device" so i can see your baseband..
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
I'm not really sure what you mean, I'm still relatively new at this.
It wouldn't boot at all, but I managed to install twrp through the recovery. Afterwards I put the rooted stock ROM on the SD card and did a wipe/install from recovery and now it's stuck doing the loop and vibrating twice each time.
I can't figure out how to find that information when I only have access to recovery, it's the Bell version in Canada, SM-N910W8. I had it up to date and just rooted it last night.
Thanks for your quick reply!
Edit: I did change a couple of things with build.prop.editor before it happened, that's what I'm thinking screwed this.
AaronBG said:
I'm not really sure what you mean, I'm still relatively new at this.
It wouldn't boot at all, but I managed to install twrp through the recovery. Afterwards I put the rooted stock ROM on the SD card and did a wipe/install from recovery and now it's stuck doing the loop and vibrating twice each time.
I can't figure out how to find that information when I only have access to recovery, it's the Bell version in Canada, SM-N910W8. I had it up to date and just rooted it last night.
Thanks for your quick reply!
Edit: I did change a couple of things with build.prop.editor before it happened, that's what I'm thinking screwed this.
Click to expand...
Click to collapse
So you have twrp installed..
Ok. Do you have a nandroid back on your ext sd by chance?? If so reboot recovery under advanced wipe sys/data/dal/cache.. then navigate to your ext were your restore is and flash it..
If not follow these steps.[emoji16]
Step #1 download either a stock rom of your choice or something like This
And a copy of the bioshock kernal. If you decide to use the rom i provided the link for. Check the md5 sums from the download source after you download the files to make sure they match. Download them onto your ext sd card.
Step#2 reboot recovery go to wipe advanced and check/ system/data/dalvik/cache/and internal.. ×3
Then factory data reset x3
Then nav to ext sd and flash the rom.
Note: if you flash the link i provided you have to flash the kernel in the same session... READ THE OP..
Note: #2 when you wipe internal your internal sd card will be wiped so if you need to save pics or whatever do so prior..
You can try skipping the internal once but if it loops then you prob should wipe it like i said and flash kernal such as bioshock.
Ok thats it for now please follow and read what i wrote carefully..
And for now stay away from COD6 for now.. unless you understand the procedure... its all about the kernal flashing in the same session before you boot up..[emoji41]
One last thing.. its dangerous to be
"NEW AT THIS" and just start flashing stuff you need to be carefull and read read read.. in your case W8 you need to flash a kernel 90% of the time same setting..
Sent from my SM-N910T using Tapatalk
@Flashvetrin, +1 on the post, also, this guy may need and must start here.....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
AaronBG said:
I'm not really sure what you mean, I'm still relatively new at this.
It wouldn't boot at all, but I managed to install twrp through the recovery. Afterwards I put the rooted stock ROM on the SD card and did a wipe/install from recovery and now it's stuck doing the loop and vibrating twice each time.
I can't figure out how to find that information when I only have access to recovery, it's the Bell version in Canada, SM-N910W8. I had it up to date and just rooted it last night.
Thanks for your quick reply!
Edit: I did change a couple of things with build.prop.editor before it happened, that's what I'm thinking screwed this.
Click to expand...
Click to collapse
And did you happen to back up before making those changes? Anytime you do ANYTHING including sneezing, MAKE A BACKUP!
AxAtAx said:
@Flashvetrin, +1 on the post, also, this guy may need and must start here.....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
And did you happen to back up before making those changes? Anytime you do ANYTHING including sneezing, MAKE A BACKUP!
Click to expand...
Click to collapse
Hes on W8 so unless im mistakin COD6 bootloader and modem will not work.
He can flash the builds but needs a kern to complete the boot... like bio..
And doesnt need the COD6 firmware..
He prob can flash the rom he wanted he just needs to follow it with the kern before he booted...
Easypeasy..[emoji3]
Sent from my SM-N910T using Tapatalk
i just ended up, starting over, doing a stock odin 5.0.2 then re rooting and re installing twrp.
and now it works fine!!
Is it possible to install TWRP onto my Nexus 6 then root with supersu, then install a different kernel? I'm trying not have the stupid red triangle apart but every time I try to install and root, it says I'm corrupt?
Sent from my Nexus 6 using Tapatalk
cwis said:
Is it possible to install TWRP onto my Nexus 6 then root with supersu, then install a different kernel? I'm trying not have the stupid red triangle apart but every time I try to install and root, it says I'm corrupt?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
You need another kernel. When M-Bootlader and M-radio and TWRP are installed you can install a custom rom like JDX and supersu. Check the OP of the JDX thread.
NLBeev said:
You need another kernel. When M-Bootlader and M-radio and TWRP are installed you can install a custom rom like JDX and supersu. Check the OP of the JDX thread.
Click to expand...
Click to collapse
I can't get past TWRP installation. It soft bricks my phone every time then I need to rollback to 5.1.1
It's getting annoying.
Sent from my Nexus 6 using Tapatalk
cwis said:
I can't get past TWRP installation. It soft bricks my phone every time then I need to rollback to 5.1.1
Click to expand...
Click to collapse
When rooted in 5,1,1 you have probably also TWRP. Than goto the JDX thread,
In the OP you find links for downloading zips with M-bootloader and M-radio and supersu and the JDX rom.
NLBeev said:
When rooted in 5,1,1 you have probably also TWRP. Than goto the JDX thread,
In the OP you find links for downloading zips with M-bootloader and M-radio and supersu and the JDX rom.
Click to expand...
Click to collapse
Thanks for the help NLB. I was thinking of something like that along those lines. Can you provide me with a link to the JDX rom? I searched for it and found very little, except some antiquated threads that dont relate to what I'm trying to do. And you were correct, the first thing I did was install TWRP on 5.1.1.
Unless this is the one,
http://forum.xda-developers.com/nexus-6/development/rom-jdx-1-0-t3121053
Would I then install this after flashing back 5.1.1/twrp then go with this? I'm not really sure what you meant by flashing the M-bootloader and radio, would that be after twrp gets flashed?
Look for chainfire's SuperSU beta version 2.52 and also for a modified stock boot.img . This worked fine for me. You can flash the modified boot.img using Wugfresh's advance utilities if you aren't comfortable using the fastboot flash commands.
Sent from my Nexus 6 using Tapatalk
cwis said:
Unless this is the one,
http://forum.xda-developers.com/nexus-6/development/rom-jdx-1-0-t3121053
Would I then install this after flashing back 5.1.1/twrp then go with this? I'm not really sure what you meant by flashing the M-bootloader and radio, would that be after twrp gets flashed?
Click to expand...
Click to collapse
You need to scroll down to first post section "Instructions" and follow them to the T.
Instructions
0. ensure you are on twrp 2.8.7+ for recovery!
1. flash bootloader if not already on JDX 4.0.x (download flashable bootloader zip)
2. flash radio if not already on JDX 4.0.x (download flashable radio zip)
3. reboot recovery
4. flash ROM
5. format data partition if not already on M
6. boot ROM and sit your phone down for 10 minutes (seriously, things need to finish setting up!)
Download files from here: http://4ndr01d.com/repos/shamu/jdx/
Perfect. Thanks so much. I'm going to do this today. I will update when finished. I'm assuming I need to take the files dated 10/6?
cwis said:
Perfect. Thanks so much. I'm going to do this today. I will update when finished. I'm assuming I need to take the files dated 10/6?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3121053
You need the first three (4.0.1; mra58k)
https://www.apkmirror.com/apk/chainfire/supersu/supersu-2-52-android-apk-download/
Busybox from PlayStore
NLBeev said:
http://forum.xda-developers.com/showthread.php?t=3121053
You need the first three (4.0.1; mra58k)
https://www.apkmirror.com/apk/chainfire/supersu/supersu-2-52-android-apk-download/
Busybox from PlayStore
Click to expand...
Click to collapse
I just flashed all the necessary files (bootloader, radio and now finished JDX 4.01.zip).
I'm about to do the format data part in TWRP. I go to WIPE>select FORMAT DATA then let it do it's thing. Is that the correct procedure? I remember formatting data once before and I bricked my device. I just want to make sure I'm doing this right before I blow it up lol
cwis said:
I'm about to do the format data part in TWRP. I go to WIPE>select FORMAT DATA then let it do it's thing. Is that the correct procedure? I remember formatting data once before and I bricked my device. I just want to make sure I'm doing this right before I blow it up lol
Click to expand...
Click to collapse
If you have completed step 4. flash ROM you are good to go. Type "yes" to confirm and format. First boot will take some time. Then you give it 10 minutes to set up things under the hood.
Witek_M said:
If you have completed step 4. flash ROM you are good to go. Type "yes" to confirm and format. First boot will take some time. Then you give it 10 minutes to set up things under the hood.
Click to expand...
Click to collapse
Worked! I have my led lights back, my speed and the warm phone again!
A few days later and I'm very happy with the rom. Everything I need!
Download:
- G920T_PD1_Stock_DeOdexed_ROM.zip
- G920T_PD1_Stock_DeOdexed_Debloated_ROM.zip (removed Google apps and a few Samsung apps)
Instructions:
1. Update to Official Tmo PD1 6.0 using this: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
2. Download then Flash this version of TWRP via Odin: twrp-3.0.2-1-zeroflte.tar.md5
3. Place the ROM and the latest [BETA][2016.03.30] SuperSU.zip onto your device.
4. Flash the ROM with TWRP then immediately flash the SuperSu.zip (use system-less mode only) and reboot.
5. Once complete the ROM will pause on the T-Mobile splash screen for 10 - 15 mins before completely booting.
6. Done!
Notes:
1. The ROM will automatically wipe System and User Data for a clean install.
2. The ROM uses the stock PD1 kernel with Chainfire's sepolicy patch.
3. Flash SuperSu in "system-less" mode only. The ROM will bootloop if you flash SuperSu in "system" mode.
Cant wait
Sent from my SM-G920T using XDA-Developers mobile app
General_Mayhem said:
Cant wait
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
The link is now live. Enjoy!
muniz_ri said:
The link is now live. Enjoy!
Click to expand...
Click to collapse
Anyway to maybe remove the data wipe? or add two versions? System wipe makes sense obviously lol unless there's no way this would work over stock rooted lollipop
muniz_ri said:
Download:
G920T_PD1_Stock_DeOdexed_ROM.zip
Instructions:
1. Update to Official Tmo PD1 6.0 using this: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
2. Download then Flash this version of TWRP via Odin: twrp-3.0.2-1-zeroflte.tar.md5
3. Place the ROM and the latest [BETA][2016.03.30] SuperSU.zip onto your device.
4. Flash the ROM with TWRP then immediately flash the SuperSu.zip and reboot.
5. Once complete the ROM will pause on the T-Mobile splash screen for 10 - 15 mins before completing booting.
6. Done!
Notes:
1. The ROM will automatically wipe System and User Data for a clean install.
2. The ROM uses the stock PD1 kernel with Chainfire's sepolicy patch.
Click to expand...
Click to collapse
May I ask what you used to Deodex? I have also Deodexed my device, but had to brutally debloat it. Settings.apk didn't function correctly, syscope, smartcardmanager and a couple of others forced closed repeatedly.. I'll take a look at this, but wondering what you used to Deodex this..
Zaphodspeaks said:
May I ask what you used to Deodex? I have also Deodexed my device, but had to brutally debloat it. Settings.apk didn't function correctly, syscope, smartcardmanager and a couple of others forced closed repeatedly.. I'll take a look at this, but wondering what you used to Deodex this..
Click to expand...
Click to collapse
Yes, I used this tool: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
I tried SuperR's Kitchen with no luck. Surprisingly, SVADEV's tool seemed to handle the job in a smarter way at least for this build.
muniz_ri said:
Yes, I used this tool: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
I tried SuperR's Kitchen with no luck. Suprisingly, SVADEV's tool seemed to handle the job in a smarter way at least for this build.
Click to expand...
Click to collapse
Super R was the first thing I tried.. In the Tools folder he has old and new oatdex files.. I tried both with little success.. I had to brutally debloat and lost my finger print scanner.. Setting.apk would force close on security settings..
Thanks for the link.. I'll take a look at it..
I don't have the time to flash the ROM, but I'll install it later on tonite..
Edit: you could copy the oat2dex file from that Deodexer script to Super R, in the Tool/Smali directory.. that should allow proper deodexing in Super R..
anaveragehuman said:
Does this ROM break encryption? Thanks!
Click to expand...
Click to collapse
My guess is that it will break encryption since the zip wipes data (data partition is encrypted)...but if it doesn't, who knows if the phone will boot. You will need a usb-otg to flash from since twrp wont be able to read the SD card partition.
I do know that I could not encrypt my phone with the patched kernel, I had to use the stock kernel. Once encrypted, I was able to flash super su to root the phone, but twrp was all kinds of red because it could not mount the data partition. Since it won't mount, you don't have a way to "nandroid backup" your phone.
Flashfire might be the solution for backing up encrypted phones, I made 2 backups with flashfire, though I haven't tried to restore. I think flashfire works with the encryption because it does not reboot until after its done, and it seems the phone is decrypted when it runs.
Sent from my SM-G925T using Tapatalk
Did a complete wipe, already had the updated bootloader and was previously on Stock 6.01. Did a total wipe in TWRP, flashed the ROM, wiped Dalvik/Art and Cache again to be sure.. Then rebooted.. Sitting on 20 mins and no boot... Stuck in a bootloop..
I got a boot loop when i flashed TWRP
anaveragehuman said:
I could have sworn TWRP had a way to mount encrypted partitions now. Did it ask you for a password when you entered TWRP?
Click to expand...
Click to collapse
it does not
yerimil said:
I got a boot loop when i flashed TWRP
Click to expand...
Click to collapse
Follow directions.
muniz_ri said:
Follow directions.
Click to expand...
Click to collapse
well i did... step 2 say flash TWRP.. step 3 then says download and then place rom on your phone. how can i place it if im in a boot loop.. im just following it in order bruh..
yerimil said:
well i did... step 2 say flash TWRP.. step 3 then says download and then place rom on your phone. how can i place it if im in a boot loop.. im just following it in order bruh..
Click to expand...
Click to collapse
The instructions tell you to use and links to a specific version of TWRP, yet you somehow missed that.
You stated in this post that you used Twrp 3.0 and only used the Twrp version linked in the instructions after you bootlooped, smh: http://forum.xda-developers.com/tmo...stuck-loop-t3360447/post66404317#post66404317
@muniz_ri hey mate good deblaoted rom do u by any chance have a flashable to return the volte files for tmobile thanks in advance
genuine55 said:
@muniz_ri hey mate good deblaoted rom do u by any chance have a flashable to return the volte files for tmobile thanks in advance
Click to expand...
Click to collapse
Thanks but I didn't realize that I removed volte. Can you see if it works with the non-debloated version?
Sent from my SM-G920T using XDA-Developers mobile app
muniz_ri said:
Thanks but I didn't realize that I removed volte. Can you see if it works with the non-debloated version?
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
I will check in a few and report back
Sent from my SM-G920T using Tapatalk