HyperDrive Tweaks - Galaxy S 4 Active Q&A, Help & Troubleshooting

Does anyone know if there is a way to install HyperDrive Tweaks 2.0 on an SGH-i537 running 4.2.2 and MF3? How about just the Device Menu(shutdown menu)? I really like HyperDrive and run 10.2 from slot 1, but since I can't run it as my stock ROM, I was looking for ways to customize my stock ROM.

monkeyhouse said:
Does anyone know if there is a way to install HyperDrive Tweaks 2.0 on an SGH-i537 running 4.2.2 and MF3? How about just the Device Menu(shutdown menu)? I really like HyperDrive and run 10.2 from slot 1, but since I can't run it as my stock ROM, I was looking for ways to customize my stock ROM.
Click to expand...
Click to collapse
I know we've been talking a bit in the other thread, but is there a reason you want to customize your stock ROM with tweaks rather than just using Hyperdrive in slot 1? Ideally here's what I would do if I ever had to start over:
Flash phone to stock MF3 at local Best Buy
Before setting up my phone again, copy the entire phone and post a zip for the community
Do not set up stock ROM, simply root and install SafeStrap
Max out the memory settings on slot 1 and only use slot 1.
The benefit to doing this is I would have an almost completely untouched stock ROM that I could always use to receive official updates while still running a custom ROM as my default.

Devo7v said:
I know we've been talking a bit in the other thread, but is there a reason you want to customize your stock ROM with tweaks rather than just using Hyperdrive in slot 1? Ideally here's what I would do if I ever had to start over:
Flash phone to stock MF3 at local Best Buy
Before setting up my phone again, copy the entire phone and post a zip for the community
Do not set up stock ROM, simply root and install SafeStrap
Max out the memory settings on slot 1 and only use slot 1.
The benefit to doing this is I would have an almost completely untouched stock ROM that I could always use to receive official updates while still running a custom ROM as my default.
Click to expand...
Click to collapse
Well, so far, my experience has been that the stock ROM is the most stable. Since I have seen HyperDrive and GPE and have even added some things from Sony Zperia, I see things I like in all of those. If I can tweak my stock and have all the parts from other ROM's that I like, why wouldn't I? There is no local Best Buy here, but I rarely take my equipment to a business for service, too many kids who don't really know what they are doing, I guess. Also, I thought I read somewhere that unlocking my phone was what would prohibit me from installing updates? But since you mention that subject, couldn't I clean the slots, un-root, remove safestrap and do a factory rest and have my original ROM? I know last week I was trying to flash a widget and I did a factory reset, wiped cache and it seemed to be stock to me. I know I had to re-setup my accounts and re-download my apps. I was able to download the last AT&T update, just couldn't install, but I still had root and safestrap. So, from what I read, I could probably install the update if I wanted to and took care of root.
So, I guess to answer your question, I get a kick out of making changes in general, whether if be with my stock ROM or an added one. I'm not a developer, but I do wish I knew more about the OS so I could help with the bootloader issue.
One thing for sure, I definitely appreciate the help I get from the folks here. Pretty fun stuff.

Related

This may be odd

But i rooted my N1, but i am completely happy with the way it is now and i dont want to flash a custom rom on it, so what can i really do now, for instance would i be able to install wired tether and have it work? or do i need to install a custom rom for that
I am just wondering if there is any benefit of your the N1 so far without having to flash a custom rom
yes, you should be able to install wired and wifi tether. but i would suggest giving other roms a shot, if you dont like it. just do a nand restore
can you still install apps2sd with no custom rom?
also newb question. doesn installing a custom rom after root give a noticable perfomance boost? like feeing up more ram and rom as well?
most custom roms have the himem enabled, so that will double the available ram for you to use. and apps2sd only works well with the custom rom they came with
i am running cyanogen, and it works really well, better than stock for sure.
But when you go to the download page of wired tethered it says i need a rdnis enabled kernel and i dont think the nexus one comes stock with it, but thats mainly just a guess not an actual fact of knowledge
I don't blame you the N1 already performs great even when it's stock, but since you're already rooted, I suggest you flash Amon's recovery, do a nandroid back up, and try out the available ROMs, you will get everything the stock ROM has and A LOT more, it gives you more memory, speed boost, battery savings, and the option to save aps to SD. If you aren't happy with it you can always restore it.
I'm running Enomther's ROM right now, and trust me you wont get disappointed.
Good Luck!
michaelo147 said:
But i rooted my N1, but i am completely happy with the way it is now and i dont want to flash a custom rom on it, so what can i really do now, for instance would i be able to install wired tether and have it work? or do i need to install a custom rom for that
I am just wondering if there is any benefit of your the N1 so far without having to flash a custom rom
Click to expand...
Click to collapse
sorry another question.
If i decide to root. could i backup all my current apps and recover them once i root. I have mybackup pro and will i be able to just run restore apps in a custom rom with mybackup pro?
And with rooted phones, all over the air updates by google must be manually installed right? instead of ota right?
I'm not sure how backup pro works but I think it'll restore your aps coz that's what its for also when you flash a new ROM, the first time you open your downloads list from the market, all the apps you have installed from your previous ROM will be available for download. Note that this only works the first time you open market, so make sure you don't exit the market until your done installing all, or you won't see them again.
Yes you wont get OTA updates when you're rooted, but this is not a big deal since the devs update their ROM as soon as Google releases an update, often, they even get the leaked versions and incorporate it in their ROMs, so you'll be running the updated version of the N1 way before the stock N1's get it.
inhuman5000 said:
sorry another question.
If i decide to root. could i backup all my current apps and recover them once i root. I have mybackup pro and will i be able to just run restore apps in a custom rom with mybackup pro?
Click to expand...
Click to collapse
GuerillaZhou said:
yes, you should be able to install wired and wifi tether. but i would suggest giving other roms a shot, if you dont like it. just do a nand restore
Click to expand...
Click to collapse
This is actually incorrect. The kernal needs to be updated to be able to use ether of the tethering apps. With the stock rom, there isn't much you can do with a rooted phone. In fact, its almost a waste to root unless your going to run a custom ROM. I use and trust Enomther's ROM's. VERY stable and capable of using tether apps, apps2sd, has the hacked kernal that allows the full use of the 512Mb of RAM etc. etc. Check it out here.
rjhay22 said:
I'm not sure how backup pro works but I think it'll restore your aps coz that's what its for also when you flash a new ROM, the first time you open your downloads list from the market, all the apps you have installed from your previous ROM will be available for download. Note that this only works the first time you open market, so make sure you don't exit the market until your done installing all, or you won't see them again.
Yes you wont get OTA updates when you're rooted, but this is not a big deal since the devs update their ROM as soon as Google releases an update, often, they even get the leaked versions and incorporate it in their ROMs, so you'll be running the updated version of the N1 way before the stock N1's get it.
Click to expand...
Click to collapse
thanks alot man.
inhuman5000 said:
sorry another question.
If i decide to root. could i backup all my current apps and recover them once i root. I have mybackup pro and will i be able to just run restore apps in a custom rom with mybackup pro?
And with rooted phones, all over the air updates by google must be manually installed right? instead of ota right?
Click to expand...
Click to collapse
Not sure about backup pro, but I think it should do what you need... atleast thats what ppl have said... i personally never used it..
Most cooked ROMs disable OTA updates... but if u hv stock rooted, you will get the OTA updates, but it'll most likely disable root if a new boot image is part of the OTA...
Daily people post about this. Why un-lock the bootloader (thus VOIDING your warranty) to keep a stock rom? Makes absolutely no sense. Cyanogen and Emon are trusted people that WILL NOT RELEASE ANYTHING THAT WILL BLOW UP YOUR PHONE!! There is a disclaimer for idiots that may not pay attention. If you follow directions you will never have a problem. If you end up with a problem (bootloop or alot of FCs) hop on #cyanogenmod on freenode IRC. Those guys are always willing to help you through problems, Even noobs usually.
Hardware defects will happen on stock just as they will custom ROMs. So don't waste your time un-locking, if you don't plan on running a custom ROM.
YOU CAN'T BRICK YOUR PHONE FLASHING CyanogenMOD/Emon ROMS!!! ONLY RADIOS AND SPL's!!!!!!!!
dude chill there questions i rooted my g1 and i thought it was a fun experience and i just bought a nexus one and i wanted to see if i could root it, but i really enjoy the way my nexus one runs now, its all i wanted to know

[Q] Rooting The Bionic, ROMs and other questions.

I have had my Bionic for a while now and have been thinking about rooting it. I finally got the ICS update but have been using GO Launcher too much to even notice it. Anyway, like I said, I want to root my phone. I am current on all updates. For some reason it's running at a tenth of it's memory tho not much is running that I can see. This leads me to believe there's things running in the background that I can not see. I am reluctant to get rid of all my apps, but I also don't want anything that's eating all my resources either. I kinda want to start new but kinda don't. I guess I just don't like letting go of anything.
I know this is selfish of me, but I am hoping that this thread will stay clean of others chiming in asking about their issues. I just don't want the thread to lose focus since this is about what I hope to get from my phone.
Ok, so here are my questions or favors to ask:
Since my phone is fully updated, do I need to do some other updated steps for rooting my phone or is rooting always the same no matter the build or version?
When I go to root my phone, I back up everything first and then I get it back, right?
I read somewhere that it's possible to brick the phone. What precautions should I take to avoid that?
Can I get all the benefits of a rooted phone without a ROM?
Are ROMs really that awesome that I should get one, or three?
I am interested in a ROM after some posts and pages I read. I was attracted to CM at first but so is everyone else probably at first. Does CM even work on the Bionic? And if it does, does everything work like the camera and Bluetooth?
As I said earlier, I use GO Launcher. One of the things I really like about it is the folders I can make in the App Drawer. Now CM is based off of ADW Launcher, but no options to make folders in the app drawer? Is it possible in any way if I choose CM as my main ROM?
Is CM overrated? Liberty and Eclipse look nice too. I also read a little, very little, about AOKP. Any suggestions? I want to get rid of a lot of extra processes and bloatware but I don't want to lose some of the apps pre-installed like Google Maps and Navigation, etc. Unless there are other, much better replacements that anyone knows of.
I know most of this is personal preference but I am hoping to find a comprehensive way at figuring out what's best for me.
I had more questions but I will wait and ask more as the thread continues.
Oh, I don't really need answers in step by step unless I ask. A simple link would suffice unless it's not covered anywhere.
Thanks for reading this, I hope I am not frustrating anyone as I am sure similar posts have been made.
You're basically asking to have this entire forum summarized into one post...
Spend some time reading, then ask smaller, more concise questions.
Not trying to sound like a ****, but i could spend an hour answering all of that. Half of those questions could be answered with some reading of the ROM specific threads.
Sent from my DROID BIONIC using Tapatalk 2
Ok, I know that SOME of the questions are answered somewhere else. The thing is that after I read one thread only to find it unsolved, I read others that are are 50 pages long going nowhere as well. I haven't seen anything about my phone being fully updated and I am not going any further until I know for sure from someone like a DEV that I can.
Some of these questions are yes/no questions, which wouldn't take long at all to answer, maybe even less time it takes to write a complaint about my post. I certainly don't expect one person to write for an hour on every topic I asked about. I thought it would be a collective effort.
I guess I will take this slowly.
Since my Droid Bionic is updated to the current versions, do I need to do this differently than others have used in the past to root this phone?
Where is the best method to do this?
Before I start, I have to backup everything, right? If so, what's the best way to go about backing up everything?
I read somewhere that there are 3 things you should do to make sure you avoid bricking. I have since lost it. Does anybody know a surefire way to do this.
Please be gentle.
CycoPuppet said:
Ok, I know that SOME of the questions are answered somewhere else. The thing is that after I read one thread only to find it unsolved, I read others that are are 50 pages long going nowhere as well. I haven't seen anything about my phone being fully updated and I am not going any further until I know for sure from someone like a DEV that I can.
Some of these questions are yes/no questions, which wouldn't take long at all to answer, maybe even less time it takes to write a complaint about my post. I certainly don't expect one person to write for an hour on every topic I asked about. I thought it would be a collective effort.
I guess I will take this slowly.
Since my Droid Bionic is updated to the current versions, do I need to do this differently than others have used in the past to root this phone?
Where is the best method to do this?
Before I start, I have to backup everything, right? If so, what's the best way to go about backing up everything?
I read somewhere that there are 3 things you should do to make sure you avoid bricking. I have since lost it. Does anybody know a surefire way to do this.
Please be gentle.
Click to expand...
Click to collapse
1st question . No, your phone is not special since it is updated what worked for others will work for you.
2nd follow this link and the instructions to the letter http://www.droidrzr.com/index.php/topic/4026-samurihls-house-of-bionic/
3rd . Since you are stock. I would suggest using Verizon's back up services. TiBu requires root. IMHO I wouldn't bother because Google automatically backs up contacts and most roms require you to do a full data wipe.
There is no magic formula to keep from bricking your phone. Just follow directions and if you can't tolerate the risk don't do it.
From my EVOLVED bionic
Obsidian_soul said:
1st question . No, your phone is not special since it is updated what worked for others will work for you.
2nd follow this link and the instructions to the letter Can not post links
3rd . Since you are stock. I would suggest using Verizon's back up services. TiBu requires root. IMHO I wouldn't bother because Google automatically backs up contacts and most roms require you to do a full data wipe.
There is no magic formula to keep from bricking your phone. Just follow directions and if you can't tolerate the risk don't do it.
From my EVOLVED bionic
Click to expand...
Click to collapse
That link no longer works
Also I found an article named "Learn How-To Root, Custom Recovery, Backup, And De-Bloat Your DROID BIONIC" while searching around for ROM ideas and such. Anyway, after reading this, it almost seems as if I don't need to do factory reset. Is this ok?
CycoPuppet said:
That link no longer works
Also I found an article named "Learn How-To Root, Custom Recovery, Backup, And De-Bloat Your DROID BIONIC" while searching around for ROM ideas and such. Anyway, after reading this, it almost seems as if I don't need to do factory reset. Is this ok?
Click to expand...
Click to collapse
Just last week I started with a stock ICS Bionic and followed this guide to root: http://droidbionicroot.com/droid-bionic-root/how-to-root-ics-on-droid-bionic-and-motorola-android/
That went very well. I wanted to try out JB 4.2.2, so I installed SafeStrap and an official CM 10.1 nightly. The net result was that I had a very unstable phone until I did a factory reset . As of this writing, however, it's behaving extremely well. YMMV.
Ratamacue said:
Just last week I started with a stock ICS Bionic and followed this guide to root: Can not post links
That went very well. I wanted to try out JB 4.2.2, so I installed SafeStrap and an official CM 10.1 nightly. The net result was that I had a very unstable phone until I did a factory reset . As of this writing, however, it's behaving extremely well. YMMV.
Click to expand...
Click to collapse
Ok, so you flashed the ROM, didn't work so well, then you did a factory reset. Doesn't a factory reset wipe the phone? If that's the case, doesn't it wipe out the ROM?
Oh one more thing. Following this link, does this wipe the data from my phone? Anything I should back up before doing this? Should I do any updates before flashing CM 10?
CycoPuppet said:
Ok, so you flashed the ROM, didn't work so well, then you did a factory reset. Doesn't a factory reset wipe the phone? If that's the case, doesn't it wipe out the ROM?
Click to expand...
Click to collapse
No, a factory data reset doesn't wipe the ROM, but it does require running the initial setup (as if you were setting up a brand new phone).
CycoPuppet said:
...one more thing. Following this link, does this wipe the data from my phone? Anything I should back up before doing this? Should I do any updates before flashing CM 10?
Click to expand...
Click to collapse
You definitely want to back up everything you're not willing to lose. I ran a backup the very first thing after installing SafeStrap, and it was a good thing because with all my messing around I managed to bork my stock ROM to the point that it wouldn't boot. Fortunately, all I had to do was restore it from a backup.
My phone on CM 10.1 had enough issues with freezing and crashing that I decided this morning to try a different ROM. So far, I've had really good results with Icarus HD (a custom ICS ROM). I really don't know if my experience with CM 10.1 was typical.
OK, so I want to root. Now does rooting wipe any data? Regarding Safestrap, I install that first before rooting?
Rooting doesn't wipe any data. Root first, then install SafeStrap.
Okay, I will be rooting and installing safestrap when I get home for work today. I will still have more questions I am sure. I do have a few before I actually start rooting or right after.
I know safestrap makes a backup/recovory, but is it full recovery only or can I recover portions, like say my Dolphin browser with the settings and bookmarks?
I read that when making a backup of stock ROM, use sdcard, I'm sure that means external but when flashing a ROM, will that wipe data from the external card?
When setting up slots for multi booting ROMs, gernally how much storage do they need?
If I have two different ROMs, does it act like user accounts in Windows, would I have to download the same app on each ROM or do both ROMs have access?
Can one ROM have stuff I don't want the other ROM to have visible?
CycoPuppet said:
I know safestrap makes a backup/recovory, but is it full recovery only or can I recover portions, like say my Dolphin browser with the settings and bookmarks?
I read that when making a backup of stock ROM, use sdcard, I'm sure that means external but when flashing a ROM, will that wipe data from the external card?
When setting up slots for multi booting ROMs, gernally how much storage do they need?
If I have two different ROMs, does it act like user accounts in Windows, would I have to download the same app on each ROM or do both ROMs have access?
Can one ROM have stuff I don't want the other ROM to have visible?
Click to expand...
Click to collapse
1. SafeStrap is full recovery only. Use Titanium Backup for backing up apps and data.
2. Flashing a ROM won't do anything to your external SD card.
3. When you set up ROM slots, you'll be asked how much room you'd like to allocate for data. The choices are 1, 2, or 3 GB. I started off allocating 3 GB to the stock ROM slot and was never able to load more than 3 separate ROMs before I ran out of room. I'd start with just using 1 GB for data.
4. Each ROM is an island. You have to download the apps separately (unless when you go through the initial setup you tell the system to restore apps and settings from the Google servers.)
Cool. I rooted and got safestrap but it's version 3.05 and not 3.11. Some ROM I was interested in said must have 3.11, which I am assuming that's the newest one so far. I did watch a tutorial about getting the current version, so no question there.
So the ROMs are separate islands and during flashing they can be in slots allocated up to 3GB. Does that mean that's the only amount of storage I can have when running that ROM? Say I like taking lots of photos and didn't save them to my external card, could I essentially run out of space or is the storage allocation just for the ROM itself and any updates it may have?
Sorry about these series of questions, just want to make sure I am doing it correctly in case I might make a mistake for future's sake.
The storage allocation is for the ROM, apps, and data that haven't been assigned to the external SD card. You can definitely run out of space if you load several ROMs and don't save any of your data to the external SD card.
Also, keep in mind that when VZW sends the OTA update to 4.1 next week, the only way to keep root is to root in ICS and use Voodoo OTA Rootkeeper to protect root before you take the OTA. If you flash the system image, you will lose root, and there is no known working root exploit for the Bionic JB release.
Lost Root
Hey, I used Voodoo before flashing the 4.1 update, but forgot to update the binary beforehand, and therefore lost root. Anyone have any luck yet with an exploit for the OTA?
And there's no working FXZ before this now, correct? This software is now the earliest version I can FXZ to?
auglove3rd said:
Hey, I used Voodoo before flashing the 4.1 update, but forgot to update the binary beforehand, and therefore lost root. Anyone have any luck yet with an exploit for the OTA?
And there's no working FXZ before this now, correct? This software is now the earliest version I can FXZ to?
Click to expand...
Click to collapse
Not root exploit yet for bionic JB. And if you try to FXZ back to an earlier version, you will brick your phone.
OK, so I rooted, got safestrap tho still not updated to 3.11, got TBU (free), got Voodoo. I had to race the clock today cuz it was updating android, or at least downloading the update. The root process I used gave me SuperSU and didn't tell me the version for the SU binaries. I searched around and all I could find was info on SuperUser in regards to backing up root. I uninstalled SuperSU, kinda. I just told it to use a different SU cuz when I used SuperUser and updated the binaries, SuperSU wanted to update them, then I opened SuperUser and the binaries reverted back. I was worried so I just told SuperSU to use a different SU. Was that ok? I didn't update to JB yet. Has there been luck with the Bionic using voodoo and keeping root after the JB update?
All this back and forth means I'm making a full image backup, then trying various ROMs. I've tried CM10.1, too many issues (no car dock, trouble installing lots of apps, no speakerphone). Next is... Whizzed Bean?
EDIT: Seems Speakerphone issue was fixed in the 0420 nightly. Will have to try it again.
AND I copied all the backups to my PC, so I can restore them at will (provided the phone still boots, that is... )
If I can't find a JB ROM I like I guess I can do HouseofBionic reflash (which did NOT cause me to lose data, as I upgraded to ICS that way) then allow the JB OTA to go through.
*sigh*... So much bull**** in these updates.
Hope someone sees my question above. I still haven't updated to JB yet. Once I do I will be flashing ROMs. I am interested in CM, Liquid Smooth, Icarus Hd and Wizzed Bean or Synergy (executioner ) Both WB and Synergy look indentical. What is the differences.
CycoPuppet said:
Hope someone sees my question above. I still haven't updated to JB yet. Once I do I will be flashing ROMs. I am interested in CM, Liquid Smooth, Icarus Hd and Wizzed Bean or Synergy (executioner ) Both WB and Synergy look indentical. What is the differences.
Click to expand...
Click to collapse
WB is a fork of CNA (codename Android) 4.1 JB (which is itself based on AOSP)
while Synergy is a fork of the standard Moto ICS (.246).
Yes, they look identical because they both used the Samsung UI elements.

[Q] Xposed on I537? Working, anyone try?

I am a bit nervous to take the plunge and try out Xposed on my Active. Just rooted it yesterday, installed the Google edition Rom. Now I am wondering if Xposed will work on stock or the Google Edition. I will give it a go if no one has tried yet.
AkFatherof4nCounting said:
I am a bit nervous to take the plunge and try out Xposed on my Active. Just rooted it yesterday, installed the Google edition Rom. Now I am wondering if Xposed will work on stock or the Google Edition. I will give it a go if no one has tried yet.
Click to expand...
Click to collapse
Xposed works fine, I haven't run into any problems. Since you're using SafeStrap anyways there's no harm in trying things for yourself. Even if something does go wrong you can always wipe your slot and start over, that's pretty much the whole reason for SafeStrap.
Devo7v said:
Xposed works fine, I haven't run into any problems. Since you're using SafeStrap anyways there's no harm in trying things for yourself. Even if something does go wrong you can always wipe your slot and start over, that's pretty much the whole reason for SafeStrap.
Click to expand...
Click to collapse
Good to know. A possible stupid question here, would it be best to load my back up of my stock onto one of the ROM Slots? To try out the Xposed. I am coming from HTC One X, so roms and such are done a bit different, I am not quite used to the ROM slot.
AkFatherof4nCounting said:
Good to know. A possible stupid question here, would it be best to load my back up of my stock onto one of the ROM Slots? To try out the Xposed. I am coming from HTC One X, so roms and such are done a bit different, I am not quite used to the ROM slot.
Click to expand...
Click to collapse
I'm not exactly sure what you're trying to do. In your first post you mentioned that you have the GPE ROM installed (I assume you have it in slot 1) and you want to install Xposed to it. There should be no problems doing this since ROMs are independent of each other and do not share any data.
I think what you really need to know is how SafeStrap works. Basically, SafeStrap creates new ROM "slots" while preserving your stock ROM "slot". These slots are completely independent of each other and only share a kernel. So any changes you make to one ROM will not impact the other. Now it is possible to flash a new ROM to your stock "slot", but this is not how SafeStrap is intended to work. Ideally you install a ROM to a new slot and use that ROM as your daily driver. The stock ROM is supposed to be your fallback in case you mess anything up with your new ROM. You are more than welcome to modify your stock ROM or even install a new ROM to your stock slot, but if you do this and you mess something up with your stock slot you could risk bricking your phone. That is why it is recommended that you don't mess with your stock ROM.
As for your original question, there is no need to install your stock ROM to a new ROM slot since it is already there, all you are doing is taking up twice as much space on your phone.
Devo7v said:
I'm not exactly sure what you're trying to do. In your first post you mentioned that you have the GPE ROM installed (I assume you have it in slot 1) and you want to install Xposed to it. There should be no problems doing this since ROMs are independent of each other and do not share any data.
I think what you really need to know is how SafeStrap works. Basically, SafeStrap creates new ROM "slots" while preserving your stock ROM "slot". These slots are completely independent of each other and only share a kernel. So any changes you make to one ROM will not impact the other. Now it is possible to flash a new ROM to your stock "slot", but this is not how SafeStrap is intended to work. Ideally you install a ROM to a new slot and use that ROM as your daily driver. The stock ROM is supposed to be your fallback in case you mess anything up with your new ROM. You are more than welcome to modify your stock ROM or even install a new ROM to your stock slot, but if you do this and you mess something up with your stock slot you could risk bricking your phone. That is why it is recommended that you don't mess with your stock ROM.
As for your original question, there is no need to install your stock ROM to a new ROM slot since it is already there, all you are doing is taking up twice as much space on your phone.
Click to expand...
Click to collapse
I understand I was a bit unclear. I do have the Google edition installed, but I am encountering massive reboots. I was going to uninstall it and install a backup version of the stock in to the ROM Slot containing the Google edition. I understand I do not want to mess with my stock Slot, that is why I wanted to install my Stock Rom into the Rom Slot I made. Which, sounds like it is the safest bet.
AkFatherof4nCounting said:
I understand I was a bit unclear. I do have the Google edition installed, but I am encountering massive reboots. I was going to uninstall it and install a backup version of the stock in to the ROM Slot containing the Google edition. I understand I do not want to mess with my stock Slot, that is why I wanted to install my Stock Rom into the Rom Slot I made. Which, sounds like it is the safest bet.
Click to expand...
Click to collapse
I would recommend deleting Slot 1, recreate it and install the GPE ROM again. A lot of people have been using it without issue including myself. The only known problem with the GPE ROM is computers do not detect the phone as a usb mass storage device when using the ROM.
If you are having issues with reboots I suggest deleting the slot and starting over from scratch. Also make sure your slot is big enough for the ROM and anything you're going to install. If the slot is too small you could run into the issues you've mentioned.
As to installing your stock ROM to a slot, why not just try another ROM? There are plenty of regular S4 ROMs that work on our phone. You are not limited to the ROMs that are found in the development section of this forum. There are at least 5 other ROMs I have tried and I'm sure there are many more that work as well.
I guess I'm just missing the point of why you want to install your stock ROM to another slot if you already have it? I'm sure there are ROMs already existing that can do what you are trying to modify your stock ROM to do. I recommend trying out Hyperdrive for tons of features. I personally use the GPE ROM found in this forum. Check out this thread for more information on ROMs that work with the S4 Active and SafeStrap.
@Devo7v, thanks, will reinstall and give it a shot. Thank you for your time.

[Q] Quick question about safestrap and ROM slots

If I understand safestrap correctly, at this time we can't use ROM slots other than stock. So when I flash a ROM, I have to use the stock slot, and I'm overwriting the original AT&T ROM. OK. So I should keep a copy of the original stock AT&T ROM on my SD card and flash that back to the stock ROM slot if I want to go back to regular old AT&T ROM.
If I want to flash something like Cerberus so that it's part of the system and isn't removable if someone steals my phone and wipes it, then I can simply go into safestrap and flash it, even over the unchanged AT&T ROM.
I should also ask, I have been using Xposed (wanam and others). Can I reinstalled Xposed now that I have installed safestrap?
I tried installing visix using a rom slot anyways. It worked fine for a day and then started acting very buggy. Had to go back to stock. I will hold off until we are told can use the rom slots. I much prefer that option vs completely removing stock.
kettir said:
If I understand safestrap correctly, at this time we can't use ROM slots other than stock. So when I flash a ROM, I have to use the stock slot, and I'm overwriting the original AT&T ROM. OK. So I should keep a copy of the original stock AT&T ROM on my SD card and flash that back to the stock ROM slot if I want to go back to regular old AT&T ROM.
If I want to flash something like Cerberus so that it's part of the system and isn't removable if someone steals my phone and wipes it, then I can simply go into safestrap and flash it, even over the unchanged AT&T ROM.
I should also ask, I have been using Xposed (wanam and others). Can I reinstalled Xposed now that I have installed safestrap?
Click to expand...
Click to collapse
you can go ahead and install xPosed however it has been reported that some modules can behave badly so just a tip to watch out for. I'm not 100% familiar with cerberus but i would think the drawback is if the thief knows how to use odin they can completely revert the device so all in all security software is great but if its stolen still best to call the carrier and have it blacklisted just my two cents.

[Q] Galaxy S5; Confirm my understanding before I start messing around

Hi guys, longtime lurker here, I just want to confirm I understand the current process for the AT&T S5 before I begin -- that way hopefully minimize operator error. I have past experience tinkering with my S3 (flashing custom roms and such), but I just upgraded to S5 last week and it seems less straightforward. I've been reading a lot of your posts which have all be very helpful. Yes/No confirmation that what I write below is correct would be greatly appreciated!
My device is running unrooted stock 4.4.4 OA1 build from OTA update. In order to gain root and start uninstalling bloatware, I will:
1.) Root with the instructions here:
http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
2.) Install Safestrap with the instructions here:
http://forum.xda-developers.com/showthread.php?p=53659958#post53659958
3.) Use safestrap to clone my stock rooted setup to a new ROM slot.
4.) Tinker around with that ROM slot.
Final questions:
1.) I found a lot of instructions for installing safestrap on this device, but couldnt find information about removing it. Can you uninstall through the safestrap app once booted into stock with safestrap disabled? Then factory reset? Just want to make sure I can undo everything if I need to return for any reason.
2.) Would I be able to upgrade the stock portion to lollipop when it releases? I assume this may break root, but I'm wondering if it would still leave safestrap and alternate ROM functioning.
You can run a rom slot but your battery life will suffer. I'd make a backup of your stock rom and keep it on the sd card then flash the custom rom in the stock slot. I'm not sure what the deal is with the rom slots but it is not battery friendly.
Edit : and yes i used that method to root my phone as well and used the safestrap method. Remember that you must have Busy box and super su to use stafestrap.
dirtydodge said:
You can run a rom slot but your battery life will suffer. I'd make a backup of your stock rom and keep it on the sd card then flash the custom rom in the stock slot. I'm not sure what the deal is with the rom slots but it is not battery friendly.
Edit : and yes i used that method to root my phone as well and used the safestrap method. Remember that you must have Busy box and super su to use stafestrap.
Click to expand...
Click to collapse
Thanks, that sounds like good advice regarding battery life. Good to hear you used the same methods too.

Categories

Resources