[ROM][N5120]Official CM11.0 Nightlies[KTU84P][4.4.4] - Galaxy Note 8.0 (Tablet) Original Android Developm

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 8 N5120, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot
BUG LIST
-BT Voice Search
[Nightlies] http://download.cyanogenmod.org/?device=n5120
Recovery(6.0.4.7): Heimdall: http://www.androidfilehost.com/?fid=23329332407567663
[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
Outdated
ROM: [2/14/14]:http://www.androidfilehost.com/?fid=23329332407571447
Changes:
-Fix Camera
-Fix Wifi Tether
-Fix Audio Calls
-Fix Microphone/recording
-Upstream CM changes
ROM: [2/5/14]:http://www.androidfilehost.com/?fid=23329332407569162
Changes:
Initial Release
Source:
http://github.com/CyanogenMod

Awesome work thanks
heres the link for the recovery 6.0.4.7 in .tar(odin)
https://www.dropbox.com/sh/pqq8fz99hfj439v/F3VsZe-d6a
Sent from my GT-N5120 using Tapatalk

It might be helpful to manually format /system as well as I encountered a bootloop several times and solved it with the format in recovery.
EDIT: I noticed that e.g. Youtube videos are displayed about 10 times faster than normal what makes it impossible to listen to music or just watch a video. Is this a known issue or shall I make a logcat of that?

WiFi tethering gives an error!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Battery life superb?
https://www.dropbox.com/s/5xg89vfl2vl4m14/wifi.txt
Hope this log helps
Sent from my GT-N5120 using Tapatalk

panjaby said:
WiFi tethering gives an error!!
Battery life superb?
https://www.dropbox.com/s/5xg89vfl2vl4m14/wifi.txt
Hope this log helps
Sent from my GT-N5120 using Tapatalk
Click to expand...
Click to collapse
Based your last picture and my experience with n5100, I think the light sensor may have problem.
Try to install Andro Sensor and check is it work or not.
Sent from my GT-N5100

Light sensor is working fine just checked. Thanks
Sent from my GT-N5120 using Tapatalk

Well, with that build here the YT problem is fixed. I did not expect fixes since your build a day ago ☺

panjaby said:
WiFi tethering gives an error!!
Battery life superb?
https://www.dropbox.com/s/5xg89vfl2vl4m14/wifi.txt
Hope this log helps
Sent from my GT-N5120 using Tapatalk
Click to expand...
Click to collapse
Can you grab a kernel log? adb shell su -c "cat /proc/kmsg" > kernelog.txt

https://www.dropbox.com/s/zdhewxpngukivrd/kmsg.log
If I've done it properly... Cheers
Sent from my GT-N5120 using Tapatalk

Just loaded the Rom and it can't recognize my SIM anyone have similar issue?
Sent from my HTC One using Tapatalk

Can you see the imei
Sent from my GT-N5120 using Tapatalk

ctrlaltdel said:
Just loaded the Rom and it can't recognize my SIM anyone have similar issue?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Sounds like your imei got lost during flash process. Check it as mentioned and if so you hopefully backed it up before flashing the rom.
Written with Tapatalk PRO on my Moto G

iKarlito said:
Sounds like your imei got lost during flash process. Check it as mentioned and if so you hopefully backed it up before flashing the rom.
Written with Tapatalk PRO on my Moto G
Click to expand...
Click to collapse
I flashed back to Sammy base and all work so the imei info should be still there? I also tried to flash different radio but still no joy
Sent from my HTC One using Tapatalk

Well then try to format system and data manually via adb in recovery and do a clean flash from scratch.

iKarlito said:
Well then try to format system and data manually via adb in recovery and do a clean flash from scratch.
Click to expand...
Click to collapse
I wipe all system, data, cache and ad card in the recovery before I flash the Rom, is there any difference do this via adb?
Sent from my HTC One using Tapatalk

ctrlaltdel said:
I wipe all system, data, cache and ad card in the recovery before I flash the Rom, is there any difference do this via adb?
Click to expand...
Click to collapse
in that case
do you have efs backup try restoring if not
might wanna start start troubleshoot from the bottom eg. you are using n5120 rom ( yes sounds dumb but!! )
check md5 of tall the files, re download the rom, dont install gapps at 1st bootup just to make sure.
go to a working rom before reflashing. which recovery are you using.
some of these thing might not have anything to do with the prob but you wanna clear doubts as you proceed.
why dont you pull a logcat and send it to the dev.
id say that start from scratch, wish i could be of more help
best of luck

I am using the recovery provided in the op, other recovery didn't work and gave error.
I dunno logcat can see this problem ? I will give it a go to dump the logcat
panjaby said:
in that case
do you have efs backup try restoring if not
might wanna start start troubleshoot from the bottom eg. you are using n5120 rom ( yes sounds dumb but!! )
check md5 of tall the files, re download the rom, dont install gapps at 1st bootup just to make sure.
go to a working rom before reflashing. which recovery are you using.
some of these thing might not have anything to do with the prob but you wanna clear doubts as you proceed.
why dont you pull a logcat and send it to the dev.
id say that start from scratch, wish i could be of more help
best of luck
Click to expand...
Click to collapse
Sent from my HTC One using Tapatalk

I cant believe it, the battery life is superb. Especially when in standby overnight I lost 1%.
Sent from my GT-N5120 using Tapatalk

ctrlaltdel said:
I flashed back to Sammy base and all work so the imei info should be still there? I also tried to flash different radio but still no joy
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Try different provider, who knows?

Has anyone actually made and received calls with this rom? I really want to try this but i do need to use my phone daily, so would like to know at least the phone/data/wifi works before flashing.
Thanks
Sent from my GT-N5120 using XDA Premium HD app

Related

[DEV][WIP][ROM][JDQ39E][4.2.2]CyanogenMod 10.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 10.1 is a free, community built, aftermarket firmware distribution of Android 4.2.2 (Jellybean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Generic source code- http://github.com/cyanogenmod
Device Config- https://github.com/nikhil16242/device_Golfu_cm10.1
Kernel Source - https://github.com/nikhil16242/stock-golfu-kenrel
This is still a WIP , so this is not recommended for daily use.
WHAT WORKS
- Audio
- RIL (As far as i have tested
- Camera(Stills and Panorama)
- Storage (Emmc and Sd card)
- Auto Brightness
- Gps
- Proximity sensor
BUGS
These are the major bugs as far as i have tested.
- Wifi
- Bluetooth
- ADB ( Detects the device as offline)
- Video Recording
- Don't use swype function in keyboard.It will fc
Everything else is untested. Might or might not work
INSTRUCTIONS
Read the instructions carefully before posting
-Reboot To Recovery and copy the Rom zip file
-Do a factory reset
-Flash The Rom
-Flash gapps
-Reboot to bootloader and Flash the kernel (boot.img) Provided with the Rom
-Reboot
-After first boot Go into Settings>About Phone and click Build number about 10 times and you will get the developer options.Disable ADB and re enable it and the device will reboot(Its a bug).After the reboot you will be able to access both internal and external sdcard storage (Just a work around for now)
-The only way to provide me logcats for now is through the terminal emulator.Open it and type
Code:
su
logcat > /sdcard/logcat1.txt
Just let it run in the background and provide me logcats if you encounter bugs other than that listed in OP. Please Dont report bugs without logcat.
CREDITS
- Whole Cyanogenmod Development Team
- The XDA team
- @sakindia123 for his work on cm10.1 for htc explorer
- @cute_prince for bringing cm10 to our device and always being helpfull :good:
- @dominos_liberty for showing interest in our device and starting the initial developement
- Anyone I have missed.
Link To Build #1 : http://d-h.st/Eqf
Gapps : http://goo.im/gapps/gapps-jb-20130301-signed.zip
Screen Shots
I start the download
saider said:
I start the download
Click to expand...
Click to collapse
Dont forget to follow the instructions given properly before flashing
nikhil16242 said:
Dont forget to follow the instructions given properly before flashing
Click to expand...
Click to collapse
of course
Hey nik, i managed to boot the rom with CM10 kernel, is there any difference? And if so, would you mind me using your source code to OC the kernel for cm 10.1?
me4488 said:
Hey nik, i managed to boot the rom with CM10 kernel, is there any difference? And if so, would you mind me using your source code to OC the kernel for cm 10.1?
Click to expand...
Click to collapse
If you boot it with cm10 kernel ril wont work. I will upload the kernel sources by today.
nikhil16242 said:
If you boot it with cm10 kernel ril wont work. I will upload the kernel sources by today.
Click to expand...
Click to collapse
i don't understand it really well so i followed your instructons rom boots and i go to settings and click build number 10 times then i go to developer options and adb is already disabled when enabling no reboot?
EDIT: had to do it a few times now it rebooted and external storage working (i tried using apollo and it's very unstable)
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
noahvt said:
i don't understand it really well so i followed your instructons rom boots and i go to settings and click build number 10 times then i go to developer options and adb is already disabled when enabling no reboot?
EDIT: had to do it a few times now it rebooted and external storage working (i tried using apollo and it's very unstable)
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
Click to expand...
Click to collapse
Enable it , then disable it again. You will have a reboot.
nikhil16242 said:
Enable it , then disable it again. You will have a reboot.
Click to expand...
Click to collapse
it rebooted
EDIT: what is RIL exactly? is it important?
error install apps
this is a great rom but one thing i miss adb we really need a fix for that!
noahvt said:
this is a great rom but one thing i miss adb we really need a fix for that!
Click to expand...
Click to collapse
you have installed the application?
saider said:
error install apps
Click to expand...
Click to collapse
Yes I know.This is a WIP (its just my 2nd build) . Its not meant for daily use for now.
noahvt said:
this is a great rom but one thing i miss adb we really need a fix for that!
Click to expand...
Click to collapse
I will try to fix most of these bugs in future releases.
saider said:
you have installed the application?
Click to expand...
Click to collapse
nah when installing an app it says: app not installed!
nikhil16242 said:
Yes I know.This is a WIP (its just my 2nd build) . Its not meant for daily use for now.
I will try to fix most of these bugs in future releases.
Click to expand...
Click to collapse
When you are able to fix the installation of applications?
saider said:
When you are able to fix the installation of applications?
Click to expand...
Click to collapse
Yesterday you had no cm10.1 , just a thread full of bickering .
Today you have cm10.1 .
Be happy it's getting built and stop asking for finish times.
If I know nik he is working hard on this and it will get fixed asap
So glad to see you on this nik :good:
whoamigriffiths said:
Yesterday you had no cm10.1 , just a thread full of bickering .
Today you have cm10.1 .
Be happy it's getting built and stop asking for finish times.
If I know nik he is working hard on this and it will get fixed asap
So glad to see you on this nik :good:
Click to expand...
Click to collapse
okay
Try using the wifi fix for CM 10 and then compiling the kernel.
noahvt said:
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
Click to expand...
Click to collapse
Hehe 4.2.2 is a big old beast . We are deffo gonna need a big ass oc ;p
I think if you havn't used 4.2.2 before you are going to end up a little deflated once you get it . It's not the all singing and dancing update that cm10 was to our phone.
And I wouldn't be suprised in the least that it will be slower.
Oh and nik and other devs . not sure on cwm but deffo on twrp , i think 2.4+ was needed as it fixed a bug where backups were spawning everywhere. It was to do with the way google made JB to accommodate multiple profiles . It's deffinately something to be aware of as when it was launched there were all sorts of problems on the forums because of multiple spawning of backups

[ROM] [4.4.x] CyanFox Rom [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit to @vedantgp (me!)
http://www.cyanfox-rom.com/
CyanFox is a light-weight Android 4.4.x custom ROM, which is based on AOSP/Android (4.4) and CyanogenMod (11.0) source bases.
CyanFox features:
- Dark UI mode
- Paranoid Halo notifications
- Screen Recording
- NavBar settings and native enabling
Features in progress:
- Unread notifications count-icons with new 4.4 API for any app/launcher
- Apps sidebar-launcher
- Advanced Recent Apps RAM bar
- Multi-color/alpha status/nav bars
- Network speed indicator in status bar
- List view animations
- More new features coming soon...
https://github.com/CyanFox
https://github.com/CyanogenMod/android_kernel_samsung_jf/tree/cm-1110/kernel
Email us at: [email protected]
Download at http://www.cyanfox-rom.com/downloads/
Please submit bugs to: https://code.google.com/p/cyanfox/issues/list
And feature requests to: http://cyanfox.uservoice.com/forums/220748-general
Help us out!
http://forum.xda-developers.com/donatetome.php?u=5302565
Our current build server:
- 96 GB RAM
- 24 Cores
- 960 TB HDD
Credits to:
Mantas Zilius [MNT]
http://www.cyanfox-rom.com/
https://plus.google.com/u/0/communities/103538505102439103284
Wanna Help?
We need help from designers to help us make our logo and other elements. If you are interested, please follow the link below, made by my friend SystemErrorOne
http://forum.xda-developers.com/showthread.php?t=2484228
​
Known Issues
Rotation Issues
Nothing else....
Instructions for Installation
[May vary on firmware, i will be vague]
Make sure your handset is on 100% battery
PREREQUISITES:
-Root
-Custom Recovery [CWM/TWRP]
1. Download latest zip file and GAPPS from http://cyanfox-rom.com/downloads/
2. Place these two zip files in the SD of your handset [internal or external]
3. Backup all of your data using Titanium Backup, or any other backup software you might have, as the device will be wiped in the process.
4. Reboot to Recovery by pressing and holding Volume Up and Down while pressing the power button while the device is turned off
5. Perform a factory reset
TWRP
6a. Press Install and guide yourself to where you put your Cyanfox zip file
6b. Press add more zips and guide yourself to where you put the GAPPS zip file
6c. Press Install
CWM
6a. Use volume keys to "Install zip"
6b. Navigate to your cyanfox zip file
6c. Repeat step 6b for Gapps file
If upgrading from a previous version or switching from CM11
6a. Dirty flash
6b. Flash Gapps
7. Wipe Cache
8. Reboot and enjoy
Screenshots​
Images are courtesy of @varben
Version numbers subject to change due to OS version
FAQ
"Omigod I'm stuck in a bootloop!"
Code:
Don't panic. Just factory reset and try again...
"I accidentally wiped everything including the internal SD!"
Code:
Just load the ROM onto an SD card and pop it into your phone
"I accidentally wiped everything including the internal SD and i don't have an SD card!"
Code:
adb sideload
"Where can i report bugs?"
Code:
Device specific bugs go to the CyanogenMOD maintainer. Overall bugs come to us
Feel free to post though to see if there is a quick fix, or a workaround
"What does the fox say?"
Code:
ring-a-ding-ding-ding-ding-a-ding
"Why isnt there more FAQ?"
Code:
Not alot of people have encountered issues beyond this... They have been fixed btw...
Interesting
Sent from my Nexus 4 using Tapatalk
spider623 said:
Interesting
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
people from the Galaxy S3/4 threads seem to love it. try it.
4.4 or 4.4.2?
Sent from my Nexus S using XDA Premium 4 mobile app
Setting.Out said:
4.4 or 4.4.2?
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's 4.4.2 Faster then any other ROM of kitkat but there is one bug Auto-rotate is not working ..
Hope it will fixed in upcoming Nightlies..
Setting.Out said:
4.4 or 4.4.2?
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
4.4.2, but that didn't look right when I was making the banner. I put 4.4 trying to cover that too
vedantgp said:
"I accidentally wiped everything including the internal SD!"
Code:
Just load the ROM onto an SD card and pop it into your phone
Click to expand...
Click to collapse
We don't have an external SD slot.
Just use this:
"I accidentally wiped everything including the internal SD!"
Code:
adb sideload
Also, don't know if you manage the site, but if you give me a quick list of additional non-CM features, I can make it look neat for the Features page.
Vuciz said:
We don't have an external SD slot.
Just use this:
"I accidentally wiped everything including the internal SD!"
Code:
adb sideload
Also, don't know if you manage the site, but if you give me a quick list of additional non-CM features, I can make it look neat for the Features page.
Click to expand...
Click to collapse
Whoops sorry. I don't manage the site. The features are listed above in the OP.
Hi @vedantgp,
I have run this great CyanFox Rom for the last 12 hours, it run good overall (except for rotation as mentioned). Very smooth.
Thanks.
I've installed this ROM and it's good but it gets laggy at times and just the rotation, since I love watching video using my phone, it's not favorable. Hehe, well. I'm willing to wait for the fix and will try to get back on it! Thanks for great ROM!
khimois said:
I've installed this ROM and it's good but it gets laggy at times and just the rotation, since I love watching video using my phone, it's not favorable. Hehe, well. I'm willing to wait for the fix and will try to get back on it! Thanks for great ROM!
Click to expand...
Click to collapse
yeah, the rotation is the problem, lag is not an issue with the rom.
status 7
i have got status 7 error
Sharkslyer said:
i have got status 7 error
Click to expand...
Click to collapse
You need to update your recovery in order flash KitKat ROMs. The latest CWM (6.0.4.3) or Philz are the only two that will do it . I recommend Philz.
http://forum.xda-developers.com/nexus-s/development/nexus-s-philz-touch-t2284670
treesurf said:
You need to update your recovery in order flash KitKat ROMs. The latest CWM (6.0.4.3) or Philz are the only two that will do it . I recommend Philz.
http://forum.xda-developers.com/nexus-s/development/nexus-s-philz-touch-t2284670
Click to expand...
Click to collapse
thx
So far, so good!!
cgaston said:
So far, so good!!
Click to expand...
Click to collapse
I have install this one, and it's a great rom.
Actually i think is the best one i have tryed till now.
I have v.2.0.2.
Single problem is the rotate function which works and not
But i have seen that is up a Experimental one launched in 16.01.2014!
Did anyone tryed it? What does bring new?
This is working great for me, the audio is no problem at all. I listen to hell lot of songs. Battery life is great. Yes, occasional lag is expected.
Sent from my Celkon A119Q using Tapatalk
pcoruganti said:
This is working great for me, the audio is no problem at all. I listen to hell lot of songs. Battery life is great. Yes, occasional lag is expected.
Sent from my Celkon A119Q using Tapatalk
Click to expand...
Click to collapse
Buy seeder, it's the entropy
Sent from my Nexus 4 using Tapatalk
New Build
New Build is up..
One bug is still there ..
Auto-rotate bug is still not fixed..

[CM11 for Cooperve5830i][Discussion]] Thread for CyanogenMod 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great Devs have been working hard for our little device. Hats off to them.
This thread aims to reduce flooding of queries not related to development in dev threads
so as not to hamper their work.
And hopefully not to flood other devices' forums as well.
Let's discuss here, provide logcats if necessary and report bugs to help the developers.
CyanogenMod 11.0 is a free, community built, aftermarket firmware distribution of Android 4.4.4 KK(),
which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions
from many people within the Android community. It can be used without any need to have
any Google application installed. Linked below is a package that has come from another
Android project that restore the Google parts. CyanogenMod does still include various
hardware-specific code, which is also slowly being open-sourced anyway.​
From CM11 Dev thread.
Current issues (06/10/2014)
OMX codecs (for accelerated audio/video - may never be solved)
SIM unlock doesn't work (you must remove your SIM lock in another device/ROM)
Video recorder
First-time installation:
Read first posts of DEV Thread:
1.http://forum.xda-developers.com/showthread.php?t=2766229
ClockworkMod v6 is mandatory to install CM11.
Download the latest full OTA build for cooperve from:
RC9: http://download.androidarmv6.org/_builds/cooperve/stable/
Nightlies: http://download.androidarmv6.org/_builds/cooperve/
Quote of dev: psyke83
"IMPORTANT!!! mandatory recovery
update required for cm11 builds later
than 23/07/2014
IMPORTANT!!!
As of 23/07/2014, all CM11 builds for the
bcm21553 series will be switched over to
the MTD flash drivers. In order for these
packages to work correctly, you must first
flash an MTD-compatible recovery (CWM
v6.0.5.2 or later only).
Don't flash the updated recovery until a)
you've backed up your data, b) the CM11
23/07/2014 build (or later) is available,
and c) you're ready to switch to the MTD
build.
How to update to MTD build:
Download an MTD-compatible recovery
(linked below) and a full CM11 OTA build
dated 23/07/2014 (or later).
Perform a full backup using the old
recovery (mandatory!)
Flash the updated recovery, and reboot
into the new recovery.
In the new MTD recovery, perform a data-
wipe, and manually format /system (this
step is critical in order for your partitions
to be properly converted to the mtd/
yaffs2 format - don't ignore it!)
Flash the CM11 package.
Once you've data-wiped and flashed the
initial MTD build, future CM11 updates
can be installed normally (delta or full
packages, as you desire).
Notes:
Older ROMs will no longer be compatible
with the MTD recovery and yaffs2-
formatted partitions. If you wish to use a
stock/modded Gingerbread ROM, CM7 or
CM9, you should wait until MTD versions
of these ROMs become available.
If you want to go back to a non-MTD
ROM, you must flash an entire stock ROM
(CSC+MODEM+PDA) via Odin, or else
your partitions will be stuck in MTD
format."
###_________________
MTD-COMPATIBLE RECOVERY @Post #308 by lesikvip
###_________________
Some Screens:
Full Screenshots: http://forum.xda-developers.com/showthread.php?p=54014189
Gapps link: http://madteam.co/forum/index.php?topic=6285.0
How to update (via OTA):
Please consult the cm-ota instructions on Jenkins.
Summary of major work done:
Forked broadcomCM devices into androidarmv6 repository (forked from ics branches).
Initial changes needed for cm-11.0 have been committed to cooperve, tassve, totoro and bcm21553-common device trees.
All of Broadcom's code has been adapted for the cm-11.0 branch.
After some reverse engineering of the vendor binaries, "adbd" and "init" built from source now work correctly.
ADB will now set the proper USB mode, can give a root shell, and no longer has a hardcoded dependency on /system/bin/sh,
which should help a great deal with debugging. We also no longer need to use the init prebuilt binary - the source-built version
is now compatible.
Implemented common kernel source for totoro, cooperve and tassve.
Implemented hybrid boot/recovery/charge ramdisk.
Fixed WiFi, Bluetooth, Bluetooth tether & mac addresses.
Fixed graphical performance regression on CM11 branch.
Fixed basic audio (speaker, microphone, software encoders/decoders)
Fixed GPS.
Fixed Gallery, wallpaper chooser, live wallpapers, RenderScript, and possible EGL crashes in other apps
Added workaround for SystemUI corruption
Fixed graphical corruption/stability issues (caused by buggy GL_EXT_discard_framebuffer extension)
Fixed RIL, telephony and audio routing to speakers, headset, earpiece, microphone and microphone mute.
* = this code is work in progress, meaning that it won't be available in OTA builds.
IMPORTANT NOTICES from the dev:
psyke83 said:
OK, I managed to fix routing and volume control while in-call. I've merged the changes and started OTA builds for the three devices, so that you can have a build with working telephony. Enjoy!
To see the build status (to know when they will be available from the updater):
totoro: http://jenkins.androidarmv6.org/job/cm-ota/390
tassve: http://jenkins.androidarmv6.org/job/cm-ota/391
cooperve: http://jenkins.androidarmv6.org/job/cm-ota/392
If telephony doesn't work in the tassve or cooperve builds, try updating to the latest baseband. If that still doesn't work, please send me a radio log:
Code:
adb shell logcat -b radio >radio.log
Click to expand...
Click to collapse
psyke83 said:
Folks,
If you're using Link2SD, Mounts2SD, or want a functional app2sd method, keep reading.
These applications are (IMHO) a little too intrusive to be used on my ROM. The main reason is that the apps install their respective mount scripts in a non-optimal location (/system), which can cause problems when you perform ROM upgrades. Link2SD is particularly egregious, because it overwrites a core system file with its script (/system/bin/debuggerd, which is needed by a system service), and this breaks delta updates.
In the past (for CM7), I always favoured S2E on my devices due to it being a much cleaner app2sd implementation, but it had some problems with corruption due to some (IMHO) unnecessary filesystem tweaks. Additionally, S2E doesn't yet support KitKat/CM11. With these issues in mind, I decided to release a fork of the application (called simple2ext_mod), which is focused on maximizing stability and providing support for CM11 ROMs.
I would strongly suggest that you give this app a try. If you're already using Mount2SD or Link2SD, you'll probably have some problems (as they will leave their mount scripts behind). So, it might be a good idea to do a data-wipe beforehand.
Here's the release thread: http://forum.xda-developers.com/android/apps-games/app-simple2extmod-cyanogenmod-11-t2840295
Click to expand...
Click to collapse
Im pretty sure everybody will use the cm7 and cm9 discussion thread for cm11 too.
Someone tried to install some gapps. Official gapps for cm (small version) can't install. Status 7 (with cwm 6).Banks gapps install ok but always fc's
Enviado desde mi GT-I9300 mediante Tapatalk
Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2
yusrilramadhan said:
Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
You need EXT4 flash it on CM 7.
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
luilly said:
Someone tried to install some gapps
Click to expand...
Click to collapse
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2
Just wanted to thank the developers for great the work.
I have closed my thread for discussion for cm7/cm9/cm10 so this is the new thread for future.
So best of luck to OP for good maintainence of discussion thread.
cooperve/cm-11-20140707-NIGHTLY-cooperve.zip
does this fix the sim card issue for cooperve?
yusrilramadhan said:
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
No, when you run the sim black screen ..
But the problem with crash on startup with sim solved! Firmware modem part S5360_XXMK1, through Odin.
Addressing 4pda. ru/forum /index.php? showtopic= 585296&view =findpost&p =32722332
Links can not place restrictions on the forum (10 posts)
lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk
Screenshots CM11 [GT-S5830i]
Updating...
Can i put these on first post?
Thanks
patrol31 said:
Can i put these on first post?
Thanks
Click to expand...
Click to collapse
Yes, you can! @patrol31
luilly said:
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk
Click to expand...
Click to collapse
Ggaps up from the usual 5830, here is the link 4pda.ru/forum/index.php?showtopic=531172&view=findpost&p=28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.
Cm 11 is a bit slow but in airplane mode it is fast
in notification bar it shows no internet connection and emergency calls ( blinking)
I think that is why the phone is slow
lesikvip said:
Ggaps up from the usual 5830, here is the link 4pda. ru / forum / index.php? showtopic = 531172 & view = findpost & p = 28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.
Original 4pda. ru/forum/index.php? showtopic=585296& view=findpost&p=32708265
Click to expand...
Click to collapse
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?
Gapps link now provided on the first post.
luilly said:
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?
Click to expand...
Click to collapse
Posted a link to a personal, if you have the opportunity to lay out in the subject as an alternative. Because I have been to most gapps problem.

[Mako][Nexus 4][ROM][CM13.0][6.0.1]Temasek's UNOFFICIAL Builds [Almost Daily]

Temasek's UNOFFICIAL CM13.0 BUILDS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will attempt to get builds out as soon as Temasek releases a new version, however due to commitments i may miss a release. I will not upload a ROM until i have flashed it myself. Please report any bugs or issues that you see; when applicable, Thank you.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This thread is currently under maintenance. Should there be any inaccurate information, please PM me. Images and formatting will be handled at a future date.
...not ready yet
A WORKING version TWRP is required i use Official TWRP 2.8.7.2
Clean Install
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Ensure you’re on the latest vendor image from google - https://developers.google.com/android/nexus/images
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM. <<-- You don't have to do this unless you want too
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. Reboot Device.
Dirty Flash
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK. (I find wiping /SYSTEM can stop some issues with play store F/C’s)
3. Install the zip from recovery.
4. Install GApps (ensure that they are from the same build, otherwise you must do a clean installation when using a newer GApps package)
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
5. Reboot Device.
More:
probably something i havn't found as yet
boot animation is not yet full screen. When I created it, I only had my hlte device but it will come in due time.
@temasek @apascual89
CM Team, CyanogenMod
@arter_dev
Source
CyanogenMod
Kernel Source
Joshndroid
Device Tree
Temasek
Rom Source
Changelogs
https://github.com/temasek/Changelogs/blob/cm-13.0/cm_hlte-Changelog.txt​
Shared Google Drive Device Folder (have Rom shared directly to your Google Drive Folder)
see here for further - http://forum.xda-developers.com/showpost.php?p=66024317&postcount=827
Basketbuild Downloads - Backup Download Location (OR for those not in Google Shares)
https://basketbuild.com/devs/Joshndroid/Temasek Roms/mako
GApps - Lollipop GApps Package
http://opengapps.org/
I have be extremely pleased with Open Gapps and you can even download daily packages, I have tried the micro, mini and nano packages with good success so far - All credit to their team and original thread source can be found here for important information and updates - http://forum.xda-developers.com/android/software/pa-gapps-continuation-t3098071
SuperSU for flashing via recovery - Credit to Chainfire
http://download.chainfire.eu/supersu
and probably this
Thanks for putting this together, really looking forward to giving it a go when I get home.
Does this include support for f2fs, have you tried it and if so do you think it is worth it?
Thanks
Can i test this rom in multirom??
If it's a test then why not.... If it doesn't work then your original rom isn't affected... I flash with multirom recovery
build v4.3 is up and ready on basketbuild, will update thread later
Sent from my Nexus 9 using Tapatalk
cat wait to try!
On the newest build from 1/5ver 4.3 -I have no boot screen after google display image but rom still works .
^^^^ relax dude, just the boot animation not playing.
Wanted to have the same temasek boot animation, we made one just like for lt03wifi but it broke lol will endeavour to fix it
Sent from my Nexus 9 using Tapatalk
joshndroid said:
^^^^ relax dude, just the boot animation not playing.
Wanted to have the same temasek boot animation, we made one just like for lt03wifi but it broke lol will endeavour to fix it
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
no problem wasnt sure if you knew about it! thats all! didnt mean to sound pushy!!
jgcmurray said:
no problem wasnt sure if you knew about it! thats all!
Click to expand...
Click to collapse
Your exclamation marks throw me off. You must just like them lol
Sent from my Nexus 9 using Tapatalk
joshndroid said:
Your exclamation marks throw me off. You must just like them lol
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
yep it is a bad habit.
Thanks to @SkyThes
Go here for FLASHABLE zip containing the boot animation fix. Proper Fix will be in next release probably later today sometime anyway https://s.basketbuild.com/devs/Joshndroid/Android Mods/Rom Fixes
Sent from my SM-N9005 using Tapatalk
I've heard rumors of a theme.zip for this too.
aaronrw said:
I've heard rumors of a theme.zip for this too.
Click to expand...
Click to collapse
Already? Do tell lol
Sent from my SM-N9005 using Tapatalk
joshndroid said:
Already? Do tell lol
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
That's all I know....for now.
aaronrw said:
I've heard rumors of a theme.zip for this too.
Click to expand...
Click to collapse
joshndroid said:
Already? Do tell lol
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I think you might be refering to this. Material Dark for Temasek
I also have a L5-AOSP Bootanimation zipped up for flashing if needed..
Nevermind I just noticed there is one posted above #13
was hoping to release 4.5 tonight, it was syncing while i was testing.. feels a bit derpy, not like previous releases. Going to hold off until tomorrows offering
joshndroid said:
was hoping to release 4.5 tonight, it was syncing while i was testing.. feels a bit derpy, not like previous releases. Going to hold off until tomorrows offering
Click to expand...
Click to collapse
I've reverted the use of linaro 4.9. Back to stock toolchain for now. So now u can rebuild.
temasek said:
I've reverted the use of linaro 4.9. Back to stock toolchain for now. So now u can rebuild.
Click to expand...
Click to collapse
Hey a buddy recommended this to me he's using opo. Thanks for the builds and I need that theme!!!! Lmao

[ROM][6.0.x][v500][UNOFFICIAL] CyanogenMod 13.0 [20161107]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
[SIZE="2"]* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
[/SIZE]
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest official TWRP recommended).
Wipe Data, System and Cache if it's a fresh install. Delete the .android_secure folder in external sdcard too.
Wipe Cache and Dalvik Cache if you're updating from a previous build of cm-13.0.
Flash ROM and Gapps.
Reboot.
Download links:
ROM: https://s.basketbuild.com/dl/devs?dl=fefifofum/lge_awifi/cm-13.0-20161107-UNOFFICIAL-awifi.zip
Gapps: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Changelog:
Short: https://github.com/awifi-dev/android_device_lge_awifi/wiki/CM13.0-Changelog
Full: https://raw.githubusercontent.com/a...nightly/cm-13.0-20161107-UNOFFICIAL-awifi.txt
XDA:DevDB Information
CyanogenMod 13.0, ROM for the LG G Pad 8.3
Contributors
fefifofum, Deltadroid
Source Code: https://github.com/awifi-dev
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KitKat Bootloader (post 3)
Version Information
Status: Stable
Created 2015-11-28
Last Updated 2016-11-07
Bug reports:
Explain how to reproduce the bug and attach logs (logcat and dmesg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs
IR Blaster doesn't work.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) Why is wifi always on in battery stats, even if it was disabled?
A) Go to Settings > Location > press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Bootloader
This rom is meant to be used with kitkat bootloader. If you are unsure of what bootloader you are using, you should flash the following zip within recovery (official TWRP recommended):
V50020F Bootloader: https://www.androidfilehost.com/?fid=24352994023707804
* Some stock based roms flash bootloader files without the user being aware of it. So just to be safe, I recommend everybody to flash the above zip to make sure that you are using all the correct bootloader files.
The installation went perfectly on a clean installation.
Huge thanks!
Same here installation is fine. Any way to make my sdcard work without a format?
ukguy115 said:
Same here installation is fine. Any way to make my sdcard work without a format?
Click to expand...
Click to collapse
yes, select portable storage.
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
ukguy115 said:
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Same here.
Sent from my Nexus 6 using Tapatalk
kbluhm said:
Same here.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I had no problems and did not need a reformat using portable storage.
ukguy115 said:
Same here installation is fine. Any way to make my sdcard work without a format?
Click to expand...
Click to collapse
There are two ways you can use your sdcard in marshmallow, as external storage or as emulated internal storage. Only the second one should require to format the sdcard.
ukguy115 said:
Tried portable storage but said it was corrupt. Bit the bullet and formatted, had a backup so no biggie. ROM working great though.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
kbluhm said:
Same here.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm not sure why this is happening to you. You could try deleting the .android_secure folder in your external sdcard from recovery. That could be the reason why it says your sdcard is corrupt.
And I just did a clean installation of the latest CM12.1 today...
Thanks a lot @fefifofum! Downloading! I guess I'll go to sleep later tonight!
I tried to run Antutu but everytime it stops at 76%.
And adding a profile picture doesn't work.
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
ukguy115 said:
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
You goto keyboard settings and disable from there.
fefifofum said:
There are two ways you can use your sdcard in marshmallow, as external storage or as emulated internal storage. Only the second one should require to format the sdcard.
I'm not sure why this is happening to you. You could try deleting the .android_secure folder in your external sdcard from recovery. That could be the reason why it says your sdcard is corrupt.
Click to expand...
Click to collapse
I too needed to format my sdcard (in portable mode) maybe filesystem related? I had an exfat fs now its fat32.
Installed yesterday. Enjoying now! Just great! Gamma is much better than in the two recent 12.1s.
Can't figure, though, how to make voice input work. There is a mic icon on keyboard... but nothing happens. Can live with that.
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
DSC05 said:
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
Click to expand...
Click to collapse
So are you using the ROM in this thread? Or are you using cm12.1?
zebinadams said:
So are you using the ROM in this thread? Or are you using cm12.1?
Click to expand...
Click to collapse
CM 13 of this thread and I compared it to latest cm12.1 build of fefifofum
Fenomeno-Tony said:
I tried to run Antutu but everytime it stops at 76%.
And adding a profile picture doesn't work.
Click to expand...
Click to collapse
That's caused by the adreno blobs from flo 6.0 used in this first release. Now I updated them from latest qcom release and the 3d test in antutu doesn't fail anymore. So tomorrow I will release a new build with that issue fixed.
ukguy115 said:
Two minor things maybe; is a clear all recents button available somewhere and I can't turn off keyboard/touch sounds, I turn off the toggle but they are still on.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
I think that the first issue you mention is an upstream bug, we have to wait for it to get fixed.
Darkmasterhk said:
I too needed to format my sdcard (in portable mode) maybe filesystem related? I had an exfat fs now its fat32.
Click to expand...
Click to collapse
That could be related to android_secure folder in external sdcard, but I need someone to erase it from recovery and confirm if that solves the issue. If that is the case, what I really need to fix is TWRP, which should erase android_secure folder when you do a factory reset.
mackeev said:
Installed yesterday. Enjoying now! Just great! Gamma is much better than in the two recent 12.1s.
Can't figure, though, how to make voice input work. There is a mic icon on keyboard... but nothing happens. Can live with that.
Click to expand...
Click to collapse
Gamma should be exactly the same as in my builds of cm-12.1. About voice input, it's probably an upstream bug too.
DSC05 said:
Portable storage works for me. I experienced some sd dismounts as on cm12.1. But in contrast to cm12.1 the external sd doesn't remount by itself. So I have to make reboot...
Otherwise everything seems work smooth and stable. Thanks for your hard work!
Click to expand...
Click to collapse
Maybe the new storage approach used in marshmallow makes the sdcard not to remount automatically, no idea since I don't have unmounts. I'm sure someone else will confirm this in the following days. This post is interesting, you should read it, maybe the easiest workaround is to use a different sdcard. What brand, capacity, class... is the sdcard you are using?

Categories

Resources