Database Develop

How to unroot my verizon tab

Alright guys i have searched and tried and tried. Currently i am on dj11 with kernal version stated as 2.6.32.9 and right below it has [email protected]#3. I am on 2.2
So what ive tried:
-I used heimdall to flash back to stock but as you can see the kernal version says im still rooted although superuser app is not installed. This causes the update to fail
-I tried to use superoneclick method to unroot but it does not work
What i want is to be stock with no root and be able to update. Any help or suggestions would be appreciated.
FYI i also used all the thread procedures on the forum (gizmo ninja and how to unbrick tab)

Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587

TabFreak said:
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
Click to expand...
Click to collapse
i believe i tried that already and it still had the words "rooted" under the kernal version. It also didnt allow me to update. I will try it again.

Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.

TabFreak said:
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
Click to expand...
Click to collapse
Will try now. Ahh I hope this works!

killerapl said:
Will try now. Ahh I hope this works!
Click to expand...
Click to collapse
Flashed and guess what?? Didnt work. Kernal version still says 2.6.32.9 [email protected] Ugh!!!

Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.

TabFreak said:
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
Click to expand...
Click to collapse
Yeah it does. Goes halfway and then stops and has exclamation mark. I tried gizmoninjas method to update but still quits. I'm totally lost.
Sent from my SCH-I510 using XDA App

I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.

TabFreak said:
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
Click to expand...
Click to collapse
I will give that a shot. The current gb leak is rooted. I did post asking to see if they (oldmacnut) had the unrooted version. Personally I like the rooted option but I do want to sell the tab and can't sell it rooted unless the person doesn't care. Bedside this issue the tab is fine and working properly.
Thank you so much for all your help. I will keeep you posted on the outcome.

Nope didn't work. Still rooted. I'm so over this hahah
Sent from my SCH-I510 using XDA App

I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!

TabFreak said:
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
Click to expand...
Click to collapse
There has to be. Wish it was like my Droid charge and just flash via Odin. If I can get the ginerbreak leak with no root I will be happy.
Or sell it to someone that doesn't mind its rooted.
Sent from my SCH-I510 using XDA App

There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.

TabFreak said:
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.[/QU
I'm gonna give it a try tomorrow. I just have to make sure if I flash under phone or PDA with Odin. Don't know if you know. For phones its PDA. Not sure with tabs. Thank you so much
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse

I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.

TabFreak said:
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
Click to expand...
Click to collapse
You effin rock!!! It worked! I now have non rooted stock gingerbread. Thank you for all your help and investigation for the right files. Youre awesome. Now time to sell this baby
Or i spent so much time doing this i think im attached now hahaha

Glad it worked the way you wanted. I went back to the rooted version of Gingerbread. Everything works the way I want it to so no reason to change (for now anyway).

Flickering screen while flashing via ODIN

Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!

Serenadier said:
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Click to expand...
Click to collapse
Wildfire wrong section, this mini thread

apisfires said:
Wildfire wrong section, this mini thread
Click to expand...
Click to collapse
I mean I've done it before on my Wildfire, but there's a problem with this on the Galaxy Mini. Problem phone in question is the Galaxy Mini now.
Sorry for the misunderstanding.. any help you can offer me?

installed from where and how?

kandros said:
installed from where and how?
Click to expand...
Click to collapse
Okay so first I downloaded the OPS, Gingerbread firmware and ODIN. Then I installed Kies for drivers, and then I opened ODIN, inserted the OPS and Gingerbread firmware file, started the process.
Somehow when it came to the reboot part, the phone just kept rebooting (screen lights up, turns off, pause, repeats again) and it hasn't worked since.
Then now there's an error with setup connection which presumably has something to do with the drivers, so I reinstalled it but now setup connection keeps occurring...

Okay, now, I tried doing the whole process again... I'm stuck at 'Close serial port and wait until rebooting' as the phone constantly flickers on and off repeatedly with no sign of anything going on.
Somebody please help :/

Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?

Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App

Small_town_boy said:
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
roofrider said:
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Click to expand...
Click to collapse
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..

download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk

Serenadier said:
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
Click to expand...
Click to collapse
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong

Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?

kandros said:
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Even when the firmware is being flashed, the screen constantly flashes on and off. Is this normal?
I'd try that, but I don't know if it would work...

roofrider said:
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
Click to expand...
Click to collapse
I'm on Asia version, I downloaded a 2.3.4 Asian version too.
apisfires said:
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Click to expand...
Click to collapse
1. From ODIN 4.38 + Tass.Ops.rar -
a. Tass_V1.0.ops
b. S5570_Odin Multi Downloader v4.38.exe
2. S5570DXKPD_S5570OLBKPD.zip
I don't think it's wrong, is it...?

Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.

dkn91 said:
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
Click to expand...
Click to collapse
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.

Serenadier said:
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Click to expand...
Click to collapse
Try flashing a 2.3.3 multi package firmware

roofrider said:
Try flashing a 2.3.3 multi package firmware
Click to expand...
Click to collapse
Doing that right away.
Is it normal for the phone to flicker on and off during the flash process, and after the flash process is complete, with ODIN showing PASS?

Okay, so installing a multi package firmware didn't work either. Now what. )': at wit's end here.

It won't flicker.
And when it's done it'll show pass.
While in download mode, Odin shows connected rite? A yellow box Appears?

Black screen. Help!

Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?

Try to go into download mode and reflash a gb stock rom via odin
Sent from my GT-N7000 using xda app-developers app

Jestina said:
Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?
Click to expand...
Click to collapse
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?

ThaiDai said:
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?
Click to expand...
Click to collapse
Okay, I tried to root it using a pre-rooted rom, N7000DXLC2 and some md5 and tar file that came along with it, but I'm not sure if I'm doing it correctly, my actual baseband is LR1 and the kernel is LR2.
At first, after attempting to root it, I kinda of did it successfully, I reached the green android alien place, but there's alot of pop up saying that this progress ended (something like that, couldn't remember.)
So I decided, to find and download my actual baseband's stock rom and try to use Odin to flash it, it succeeded, but the problem is, my screen is staying black this time, But I know that my phone is still working, just that the screen is not displaying anything..

Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?

CJSlim79 said:
Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?
Click to expand...
Click to collapse
Yeah I did get into the download mode, the first ROM was 3 part file, second one was a single file.. and yeah setup correctly.

Nobody knows a fix for this?

Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Ok -
You can get back into download mode - what happens when you try to flash a stock GB ROM in PC Odin, *Use a 1 part file from here*
http://forum.xda-developers.com/showthread.php?p=26455511#post26455511
You need to provide as much info as you can otherwise it is hard to help...
In ODIN - You said it was setup correctly? Where did you confirm this?

Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Read here. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/2/
Read it carefully and do it at your own risk if you decide to flash it.

I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.

Jestina said:
I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.
Click to expand...
Click to collapse
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..

+1, Definitely not a screen problem if you are able to go in download mode & see the green guy.
Just try to reflash via PC odin a GB ROM.

CJSlim79 said:
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..
Click to expand...
Click to collapse
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...

Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..

Black Screen
Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.

CJSlim79 said:
Ok but in download mode - do you see the Android guy?....or girl..????........
..
Click to expand...
Click to collapse
Seriously... your kidding right??
geist_100 said:
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.
Click to expand...
Click to collapse
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!

CJSlim79 said:
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..
Click to expand...
Click to collapse
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'm pleased a couple of people picked up on it

Erm.. I've downloaded the CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5, but when I open it up its a zImage file.
What am I suppose to do with it? x_x
Edit; Nvm, got it!

letters_to_cleo said:
Seriously... your kidding right??
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!
Click to expand...
Click to collapse
I did what you said, but now my note still stays black.. I guess its my screen problem now huh.. Weird..

[ROM][TAR] Stock NG2 Odin flashable

You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY​
Just the NG2 FULL stock tar.
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,

will this work on rooted phone?
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.

jam97 said:
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
Click to expand...
Click to collapse
Yes this will update you to the new update NG2 and no the bootloader is still locked.
chriseboy said:
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
Click to expand...
Click to collapse
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720

ROMANTiC KiD said:
Yes this will update you to the new update NG2 and no the bootloader is still locked.
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
Click to expand...
Click to collapse
sorry for this stupid question , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app

jam97 said:
sorry for this stupid quastion , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
You will need to re-root the phone after installing this file! Then you will be able to install a custom recovery..

Thanks for putting this on a speedy host. I just downloaded it tonight in under half an hour at my daughter's house, and she doesn't have a particularly fast internet connection.
A quick question - does this file leave your programs intact? Sometimes I like a total wipe (except for my SD card), and start fresh.
Thanks again

my wifi is broken after flashing. won't turn on

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
same problem let me know if you find how to fix it

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
Reflash it again
Sent from my SPH-L720

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
ROMANTiC KiD said:
Reflash it again
Sent from my SPH-L720
Click to expand...
Click to collapse
Same here, I wiped then installed twice, no wifi. I'll try one more time,

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
That's odd.
I have installed this NG2 tar file with Odin on 2 different phones and WiFi works perfect on both..

2WhiteWolves said:
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
Click to expand...
Click to collapse
Thanks for the reply. I did try one more time and this time I went back in recovery and did the two wipes, went back in to download, opened odin3 3.09 via administrator and removed the auto reboot check. after it finished i manually rebooted and wifi worked.
---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------
Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?

DAFTEK said:
[/COLOR]Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
Click to expand...
Click to collapse
Have you tried to pull down the notification bar with two fingers > long press on Hands Free icon to see if something is turned on to make it show up on notification bar? If turned on, shut it off. Hopefully it is that simple. If not that simple, I have no clue how to make it stop. Maybe someone else does.
I haven't heard of anyone having that problem.

Yeah, I tried everything, it's part of the rom I think, nothing worked to make it go away..
I just went back to goldeneye rom, all working perfect again. Thanks.

I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
+1
also I confirm that everything is working great.

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
Nope. it doesn't wipe data unless stated by the OP that it does. It only restores any apps deleted, or reverses any mods made. Example if you are running Aosp and Odin back to stock. You will get bootloop. After Odin always go to stock recovery and do a factory reset to have a clean install.
Sent from my SPH-L720

Wifi didn't work for me on this rom, coming from a custom mf9 rom. So I odin mf9 bootloader package, and then flashed stock mf9 odexed rooted rom, then odin the mf9 kernel. And did NG2 upgrade through Kies. Now Wi-Fi finally works for me but it's impossible to root. But at least now I got everything working, when I get off of work I can flash the OP version of NG2 cuz at least I could root that 1.

Can't install stock firmware...odin keeps failing

Okay guys, I just got a brand new tmobile note 4. Tried rooting it but something went wrong...
Didnt make a backup either so hopefully you guys can help me.
I installed twrp successfully...but after installing supersu...kept getting the boot loop.
Decided to give up rooting and go back to stock.
Downloaded the latest 5.0.1 stock firmware for my phone but after running it through odin, it keeps failing.
I don't know what to do.
I didn't hard brick it since i can still boot into download mode and twrp recovery. But i already wiped system so i don't have any OS on it now.
Should i just chance it and try and send it back to tmobile for a replacement?
Any feedback would be much appreciated!

Well, atleast you could find the firmware. -- I cant find it anywhere for my n910t3.

DrDank said:
Well, atleast you could find the firmware. -- I cant find it anywhere for my n910t3.
Click to expand...
Click to collapse
I just realized that i've been downloading the wrong firmware for my phone. i have the same model number as you. i just did a search and found a firmware for our phone model but it takes 3 hours to download. I will update in the morning when it's done downloading.
Since i can't post outside links yet, just google "SM-N910T3" and look for the firmware in the results, that's how i found it.

I have downloaded a firmware that I want to use it for my galaxy s5 with unknown baseband, and I will try it I hope it will work
Sent from my iPhone using Tapatalk

bongaloman001 said:
I just realized that i've been downloading the wrong firmware for my phone. i have the same model number as you. i just did a search and found a firmware for our phone model but it takes 3 hours to download. I will update in the morning when it's done downloading.
Since i can't post outside links yet, just google "SM-N910T3" and look for the firmware in the results, that's how i found it.
Click to expand...
Click to collapse
I finally ran across it.. I used this and it worked like a charm.. so far haven't found any problems yet.
http://androiding.how/download-t-mobile-note-4-5-1-1-firmware-n910t3uvu1dofc/

DrDank said:
I finally ran across it.. I used this and it worked like a charm.. so far haven't found any problems yet.
Dude you are a godsend! I downloaded that firmware and now i have my phone working again! I cannot thank you enough!!!!!!!! People like you make the world go round! Much appreciated!!!
Click to expand...
Click to collapse

masmuhi said:
I have downloaded a firmware that I want to use it for my galaxy s5 with unknown baseband, and I will try it I hope it will work
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Wrong thread dude.

Can a mod close this thread? Problem is SOLVED. Thanks.