[Q] Phone won't boot unless I clear Dalvik - Xperia Z Q&A, Help & Troubleshooting

Hello All, I did some searching for this, but all I can come up with is quite the opposite of my issue. My issue is my phone got stuck in boot loop. Having been on this forum a few times the first thing I did was clear the cache and dalvik and it booted right up. But unfortunately anytime I reboot, it gets stuck on the bootanimation and no matter how many times I reboot, it absolutely will not work unless I clear the dalvik, every time.
Any thoughts on what may be going on, I would really love suggestions that I might can try to see if it's a permanent fix.
Regardless, thanks for your time and effort :fingers-crossed:

T-Mobile C6606
Updated To
[LB] eXistenZ v6.0.0 - Ultra Edition
10.4.1.B.0.101

Kinda hard to help with so little information.
Do you by any chance have xposed framework installed?
If so I know that if you restore app + data from titanium backup for xposed modules it can cause your phone to stick on the boot animation. Clearing dalvik cache would temporarily fix it.
If that's your case then you can go into setting / apps and clear data on all the modules.
If that's not your issue then you may ave flashed something incompatible with your framework. Without much information I can only suggest that you re-flash your rom or firmware.

Trucifix said:
Hello All, I did some searching for this, but all I can come up with is quite the opposite of my issue. My issue is my phone got stuck in boot loop. Having been on this forum a few times the first thing I did was clear the cache and dalvik and it booted right up. But :
Click to expand...
Click to collapse
Do you use gravity box?
If yes,then disable it in xposed modules and reboot
Gravity box has been causing these kind of bootloops for most of us

I had this issue sometimes when i was using advanced power menu with my previous stock rom. When rebooting from advanced power menu i always had bootloop, but when restarting from the xposed menu for example, no bootloop.

Thank you all very much, and I use all three of those, xposed, gravity box, and advanced power menu. I will try all three of those suggestions today and report back which one may have did it.

Most likely gravitybox. There's been a lot of talk about it. Some don't have it at all, some got rid of it in the newer version and some like me has it with all 'newer than 2.8.5' versions. I usually can get it by trying to boot some times but it happens randomly.
Incredibly annoying and there's some things in newer gravitybox versions that I'd really like

SOLVED - Phone won't boot unless Dalvik is cleared
Kocayine said:
Most likely gravitybox. There's been a lot of talk about it. Some don't have it at all, some got rid of it in the newer version and some like me has it with all 'newer than 2.8.5' versions. I usually can get it by trying to boot some times but it happens randomly.
Incredibly annoying and there's some things in newer gravitybox versions that I'd really like
Click to expand...
Click to collapse
It quit doing that after I cleared app data and cache for gravity box. Gravity Box is definitely a factor :silly: If it comes back again I will go through more appropriate channels now that I know the culprit.
Thanks every one !!!

Related

Voice Search Broken, says "Can't reach google at the moment."

Hi All,
Running stock but rooted (with Xposed modules) 4.4.4 on Verizon Moto X with an unlocked bootloader. (Flashed this stock ROM: http://forum.xda-developers.com/showthread.php?t=2829123 )
Any time I try to do any activity with voice I get the error, "Can't reach google at the moment."
I get this error if I click the mic in google now and by clicking the voice text mic on the keyboard. Also, Touchless Controls doesn't respond.
After searching around forums I've tried some suggestions that worked with similar problems on other phones, but to no avail. I've tried:
- clearing data and cache of google search app and force stopping (lost my google now launcher set up in the process)
- removing my google account from the phone, rebooting to recovery, clearing cache and dalvik, rebooting and adding my account back
Thanks for any suggestions.
hi, had the same issue with one of the modules in xposed, ended up wipping the device and started fresh, installed xposed and gravity box, no other modules, all is good now.
ericizzy1 said:
hi, had the same issue with one of the modules in xposed, ended up wipping the device and started fresh, installed xposed and gravity box, no other modules, all is good now.
Click to expand...
Click to collapse
Hmm, interesting...
I'm thinking it's not a specific Xposed module... I just tried uninstalling xposed framework altogether and then wiping cache and dalvik for good measure. No luck.
But out of curiousity, these are the modules I have installed: GravityBox, Exchange Bypass For Xposed, SingalIconsAOSP, Unicon. Besides GravityBox, did you have any of these installed when you had the issue?
I hope this doesn't come down to just wiping, which it most likely will.
My droid maxx has had the same problem since the update to 4,4,4 I have tried everything including a fdr ( through twrp ). Nothing has worked ! Moto has offered me a new phone but I don't want a new one as mine is unlocked and rooted ( otherwise stock ). I think I'm going to unroot it, put back in the stock recovery and try a fdr through that...POS !!!
This may not help at all....but maybe worth a shot. If you try and it doesn't help, post back here and let everyone know so nobody else tries it.
You might have some luck by erasing baseband cache with fastboot:
fastboot erase modemst1
fastboot erase modemst2
You might have to re-activate afterwards. It is the only suggestion that might be relevant that you haven't tried already...
Good Luck....that would be a frustrating issue... :good:
Unfortunately I gave up and just wiped and did another clean flash and its working again. It was very frustrating not having touch less controls or voice to text...
Thanks for the help though anyway.
leffer said:
Unfortunately I gave up and just wiped and did another clean flash and its working again. It was very frustrating not having touch less controls or voice to text...
Thanks for the help though anyway.
Click to expand...
Click to collapse
I agree touch less control wasn't something I cared about when I got the phone. But after getting used to it its hard to go without.
When you say you wiped and flashed. Can you elaborate. I tried fxzing ( saving data ), 2 FDR's everything .. Did you unroot then use HOM ? I will try anything at this point . Thanks in advance
tombaldwin6 said:
I agree touch less control wasn't something I cared about when I got the phone. But after getting used to it its hard to go without.
When you say you wiped and flashed. Can you elaborate. I tried fxzing ( saving data ), 2 FDR's everything .. Did you unroot then use HOM ? I will try anything at this point . Thanks in advance
Click to expand...
Click to collapse
My bootloader is unlocked so I was able to simply factory reset and reflash the stock 4.4.4 ROM from the thread I linked to in the OP...
leffer said:
My bootloader is unlocked so I was able to simply factory reset and reflash the stock 4.4.4 ROM from the thread I linked to in the OP...
Click to expand...
Click to collapse
I will try both methods and post back. Thanks for you help !
So I took both suggestions tried them 1st. I tried erasing the the baseband cache's via fastboot. No luck. 2nd I reflashed the current 4.4.4 stock rom via HOM, Full FXZ ( no data saved). !st off what a pain in the ass it is to reset up these phones from scratch. I setup my Google account but I didn't let Google reinstall all my previous apps and there data. I then went into settings and arranged things how I like them. Cleared off my home screens, put a few of the apps where I wanted them. I then went into the play store and allowed all apps ( preloaded ) to update. I then went back into settings and went to touchless control. To my surprise it worked ! I then went about loading all my apps.The usual 1's everyone has ie: Elixir2, FX filemanager,Poweramp, MX Player,Chromecast Panasonic tv remote 2, Google Wallet, UE Miniboom and Few other nondescript. Then I checked touchless control again and It was still working. Then I decided to install twrp and its recovery via fastboot ( 2.6.31 ) let it root the phone for me. Here's where it gets dicey.. It was late and I had had it with this friggin phone. I went and loaded all my apps that required root,Superuser pro, Dsploit, Busybox pro,Android terminal emulator, Wakelock(full) all the usual's. Then I went through and disabled all of the bloat. Rebooted and switched the phone to ART The following morning I went to show a friend how I had fixed my phone and It no longer worked ?
So I FXZ'd again not saving any data. Reinstalled twrp , rooted . Then 1 by 1 I reloaded every single app back into the phone and checked google now between every single install. Also this time I didn't let any of the bloatware update. I planned on disabling it anyways so why bother. I didn't install any apps that require root except twrp, busybox, Dsploit and #mirrorenabler . Also it's currently back on Dalvic. So as my phone sits now touchless control and all of its functions are working again. It's obviously a rouge app or ART Runtime that did this and I will narrow it down in the next few days and report back.

[Q] CM12 Nightly Factory Reset Lost Root

Was handing off my phone to my son, moving on to an LG G2, I let him test it out under my account, he added his account and phone was a little sluggish since the extra account was taking up more RAM, so he hands it to me while I was in bed and needs help, I factory reset it thinking it would just wipe out my personal data and allow him to enter his, well it did, but now he lost Root and I am stuck on the 1st nightly with memory leak...
Any method available to reroot this phone when in 5.0 so I can continue upgrading with nightlies? Or am I in a world of hurt now?
Justatechie replied in another thread, THANKS!!
Thats not going to work, it only works with the stock atrix hd 4.1.1
Cm12 can be rooted by going into developer options on the phone,
under root access (its disabled by default)
Just tap on it and allow apps or app and adb and it should be all set.
Other people prefer to flash supersu by going into recovery, just download the latest and put it where you will find it when you use the recovery.
I completely forgot about that, I had enabled developer mode, but nothing else, thought the reboot into advanced options was default, which it was not and slightly had a panic attack.. Thanks for the save...
Running apps stay running after a flash...
First thing odd I noticed, after giving him my phone and his adding his apps, is that when you click square to see running apps and click the 3 bars to turn them all off, they do not turn off, you have to swipe each one off now.
When I had the phone that process would end all apps I had started, now they stay on unless you swipe them off.
Also, after flashing the update to latest nightly, all the apps that were running before I flashed it and entered recovery to perform the flash, were running again upon a reboot. I have never seen this on any build, don't know if it is one of his apps causing this or what??
And I cleaned cache, cleaned dalvik, flashed both zips, cm12 and gapps, then cleaned cache again as instructed in the 5.0 threads.
I tried to see if it would happen again so I opened 3 apps, then performed a reboot, after phone rebooted, clicked the square and those same 3 apps were active...
What may have caused this?
Factory reset may have some bug as the phone was performing normally before I used that method to clear out my user data.
And if I ever decide to part with the phone I would expect that feature to work or I would be forced to keep it...
sobitthen said:
First thing odd I noticed, after giving him my phone and his adding his apps, is that when you click square to see running apps and click the 3 bars to turn them all off, they do not turn off, you have to swipe each one off now.
When I had the phone that process would end all apps I had started, now they stay on unless you swipe them off.
Also, after flashing the update to latest nightly, all the apps that were running before I flashed it and entered recovery to perform the flash, were running again upon a reboot. I have never seen this on any build, don't know if it is one of his apps causing this or what??
And I cleaned cache, cleaned dalvik, flashed both zips, cm12 and gapps, then cleaned cache again as instructed in the 5.0 threads.
I tried to see if it would happen again so I opened 3 apps, then performed a reboot, after phone rebooted, clicked the square and those same 3 apps were active...
What may have caused this?
Factory reset may have some bug as the phone was performing normally before I used that method to clear out my user data.
And if I ever decide to part with the phone I would expect that feature to work or I would be forced to keep it...
Click to expand...
Click to collapse
Apps will continue to run if you reboot. This is not a bug but a feature from Lollipop

[Q] Issue with Root Duration

Hey guys, I didn't see anyone ask this question explicitly but if it has been stickied somewhere and I just overlooked it I apologize.
Basically I've flashed several different root images using Mofo root and they work for the most part minus one small aspect. After some duration of time (I'm not sure exactly how long but maybe from an hour to a few hours), root apps will basically stop functioning. If I go into supersu, I just get a loading circle that never gets anywhere. I've tried force closing it and disabling/reenabling superuser but that hasn't worked. Some apps continue to function (Gravitybox custom tiles, WiFi Tether, Seeder) but others do not start up properly (TiBackup for example gets stuck at the loading screen where it says asking for root privileges and tasker secure setting profiles return an error). Only a hard reboot will properly restore root but then the same issue occurs where after a while I have to continue to hard reboot once root stops functioning.
Any help would be greatly appreciated! Thanks!
Sorry I don't have a solution but I just wanted to bump this thread because I'm having the same issues as you. Wakelock detector also gets stuck on loading screen and supersu fails to open.
vahx129 said:
Hey guys, I didn't see anyone ask this question explicitly but if it has been stickied somewhere and I just overlooked it I apologize.
Basically I've flashed several different root images using Mofo root and they work for the most part minus one small aspect. After some duration of time (I'm not sure exactly how long but maybe from an hour to a few hours), root apps will basically stop functioning. If I go into supersu, I just get a loading circle that never gets anywhere. I've tried force closing it and disabling/reenabling superuser but that hasn't worked. Some apps continue to function (Gravitybox custom tiles, WiFi Tether, Seeder) but others do not start up properly (TiBackup for example gets stuck at the loading screen where it says asking for root privileges and tasker secure setting profiles return an error). Only a hard reboot will properly restore root but then the same issue occurs where after a while I have to continue to hard reboot once root stops functioning.
Any help would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
I also had the same issue. I am using the image with busy box and Xposed framework installed. After a an hour or so super user said that the binary was not installed, and most of my root apps stopped working. Root checker said my Turbo was not rooted, though gravity box and a few other Xposed modules continued to work. I rebooted the phone, but had the same problem. I turned notifications for the supersu app back on, and after about a minute it said the binary had to be updated, and I had root again. I'm not sure what is going on, but I will come back if I find anything
I'm not having any issues. I would reboot the phone into recovery and wipe the cache there. Hope that helps.
Glad I saw this thread...I'm having the exact same issue!
A hard reboot will solve the problem every time...but its quite annoying...
I'm going to try a factory reset and see if that helps
Clearing the cache seems to have solved this for me. I haven't lost root in a few days.
Seems to have resolved itself
I just wanted to mention that between clearing the cache and flashing a different rooted image this issue appears to have resolved itself.
I will update after some time to see if this fix maintains or if anything else pops up. Thanks for the suggestions!
ahaynes42 said:
Clearing the cache seems to have solved this for me. I haven't lost root in a few days.
Click to expand...
Click to collapse
What cache did you clear? I tried to clear the cache from the recovery, but my phone freezes and I have to reboot. Then I loose root a while later.
ahaynes42 said:
Clearing the cache seems to have solved this for me. I haven't lost root in a few days.
Click to expand...
Click to collapse
I cleared cache in recovery...didn't help...gonna have to try a factory reset

[Q] Problem with CM11-nightly on GT-I9100

Hey...
I am using the xposed framework for a long time now on my S2 without any problems. A lot oft different custom roms has been running like a charm and my experimenting with a lot of modules has never ended in such a strange issue. I try to explain....
I can install the framework including every module without issues. A reboot activates the framework and still all is good. But when I activate some modules and restart afterwards, all user apps are gone. Even those which have nothing to do with xposed. Looks like a factory reset but only app-wise. My settings are still like I did set them.
Trying to reinstall them ends in an "app was not installed" error. Now I need to factory reset to resolve this. I installed different builds, including the latest build from yesterday. But I always end up with the same. The experimental xposed installer also did not change anything. I even tried to get rid of this by doing a rom-nuke with the Hawker core script before installing the rom. But still the same.......
I really dont know why I am not able to activate the modules anymore like I always could before and hopefully I could explain my problem clear enough to understand without forgetting anything important I can not see myself. Well, it's not my native language so it may difficult for you to read. If this is the case I apoligize.
What should I try to resolve this. I really want my beloved mods to work again. Thanks for any support.
Cheers

Wipe Cache/Dalvik on non rooted locked bootloader

Well, as far as I understand, Dalvik does not exist anymore as the JRM is now ART, but there might be a cache associated as well ?
Anyway, on my previous phone (S4 mini plus), I used to recovery 20% performances after cleaning cache/dalvik once a month through the embedded recovery (well my phone was also rooted but I know that this could be done with full stock).
With my XZ1 Compact, I can't boot to recovery, I believe the feature is block by Sony (damn I miss root so much).
So, is there an alternate way to clear this cache ?
I have an issue since the latest firmware update where location and timer icons do not disappear from the status bar after they have been turned off, this is annoying, I hope a cache clear could solve this...
JackyJacks said:
Well, as far as I understand, Dalvik does not exist anymore as the JRM is now ART, but there might be a cache associated as well ?
Anyway, on my previous phone (S4 mini plus), I used to recovery 20% performances after cleaning cache/dalvik once a month through the embedded recovery (well my phone was also rooted but I know that this could be done with full stock).
With my XZ1 Compact, I can't boot to recovery, I believe the feature is block by Sony (damn I miss root so much).
So, is there an alternate way to clear this cache ?
I have an issue since the latest firmware update where location and timer icons do not disappear from the status bar after they have been turned off, this is annoying, I hope a cache clear could solve this...
Click to expand...
Click to collapse
Factory reset?
There is a handy app System UI tuner, you have to add a couple of cammands via ADB to get it to work on non-rooted. But it will get rid of unwanted icons.
Nope, the factory reset is not a solution, I just want to wipe cache, not data.
Thanks for the tool, but this wouldn't fix my issue that seem actually related to the latest firmware (I'm not looking for uninstalling apps from system).
JackyJacks said:
Nope, the factory reset is not a solution, I just want to wipe cache, not data.
Thanks for the tool, but this wouldn't fix my issue that seem actually related to the latest firmware (I'm not looking for uninstalling apps from system).
Click to expand...
Click to collapse
I wasn't talking about uninstalling apps from the system
Hello there, wondering would you share it here if you did find a solution?
Thanks
I can't get into recovery mode neither on XZ1c...

Categories

Resources