Database Develop

Problems with ADB install..

Hello all,
I have been following the guide posted by Nephron http://forum.xda-developers.com/showthread.php?t=532719 but am having a few problems with my computer recognising my G1 as an ADB device...
My computer's OS is Vista. I have followed the guide to the letter, have downloaded the SDK and unzipped it to C:\ root. I have checked my phone and ensured that 'USB Debugging' is checked. My computer doesn't try to install the Android 1.0 driver (as the original drivers are already installed) and my device is ready to use as a storage device - HOWEVER it is not acknowledging it is an ADB device.
I have tried using USBDeview but it won't let me uninstall the 3 already installed Android drivers. I have even tried manually uninstalling them through the taskbar USB device manager. Even when I uninstall them and re-connect my phone, it automatically installs the standard drivers and doesn't give me an option to select the SDK drivers.
Hope that makes sense to someone. How can I install these damn SDK/ADB drivers on my G1?! Thanks.

Try this...
Remove every mass storage device except your phone (Any usb memory sticks, external HDD's, other phones, etc)
Open the start menu, right click on 'Computer', click 'Manage', and you may need to click continue here.
On the next page, click on 'Device Manager' on the left hand side. In the list on the right, open up the tree for 'Universal Serial Bus Controllers'
Find 'USB Mass Storage device' in the list. Right click it, click 'Uninstall'
Click 'Action' at the top, then 'Scan for hardware changes'.
If it all goes well, you should now be asked to locate a driver, point the the Android USB driver. Good luck.
PS, this is all from memory of the issues I had, so if you get stuck, post back .

Worked a charm, thanks!
(Mods...can this be merged to the NEWBIE Q&A thread for ADB/Fastboot etc...more useful place for it than here!)

Glad I could help .

OK...
New problem...
I am using command prompt on vista, entered the following:
cd C:\android-sdk-windows-1.5_r2\tools
adb devices (shows my device listed as HT845KV02724)
adb shell (shows a # on the following line)
However....when I enter adb it returns with /sbin/sh: adb: not found .....what have I done wrong? I have checked that the SDK is in C:\ and have downloaded the SDK again just to be sure. What do I need to change???

Once you type adb shell, you're in a terminal on your phone, you can type shell commands there, you need to type exit before typing adb again.
Basically, it's working as intended .

Lost ADB Access...

Hi.
I don't know what happened, but I cant access my phone via adb anymore. I've used adb for months with no problem so far.
The Device is shown in windows xp as "Android Composite ADB Device". I uninstalled an reinstalled the drivers. But ADB and other apps like ddms don't recognize the device anymore.
I'm not sure, but perhaps the problem exists since I installed the modem-driver to use USB-tethering.
USB-Debugging is enabled too...
Does anyone have an idea?
I'm using cyan 4.3.2.1.

Try unplugging your phone, turning it off, on, let it load up, connect it to your comp, wait a good minute or two for it too load up, double check USB debugging, etc. etc.
If it still doesn't work, boot into recovery, connect it, and try adb shell there. ( assuming you have cyan's recovery, or that other custom one, Idr the name xD )
If none of that works, try to re-root using this;
http://wiki.cyanogenmod.com/index.php/Upgrading_From_Older_CyanogenMod_Versions
Make sure to backup and stuff, etc. etc.
Hope I helped!

Exodeity said:
Try unplugging your phone, turning it off, on, let it load up, connect it to your comp, wait a good minute or two for it too load up, double check USB debugging, etc. etc.
If it still doesn't work, boot into recovery, connect it, and try adb shell there. ( assuming you have cyan's recovery, or that other custom one, Idr the name xD )
Click to expand...
Click to collapse
thx a lot for the quick answer, but I tried all of this. In the Recovery (Amon Ras' I recognized the first time, that adb doesn't work)
I can't believe, that I have to re-root... Recovery and SU are still working.
Any other experience with the problem?
p.s.: I unchecked the USB-Tethering and already uninstalled the modem-driver without success...

That's weird, you sure your in the right area on your cmd prompt?
x:\xx\android\tools adb shell
You could also try adb remount and see what that gives you.
I'm just learning the real ADB commands, forgive me, I'm no master
Edit: Make sure to unplug your phone before you uninstall the USB/ADB drivers, and make sure you uninstall *everything* that has android or HTC on it from the device manager.

Exodeity said:
That's weird, you sure your in the right area on your cmd prompt? ( Assuming your on windows, the Terminal in linux, I'm sure you know xP )
x:\xx\android\tools adb shell
You could also try adb remount and see what that gives you.
I'm just learning the real ADB commands, forgive me, I'm no master
Edit: Make sure to unplug your phone before you uninstall the USB/ADB drivers, and make sure you uninstall *everything* that has android or HTC on it from the device manager.
Click to expand...
Click to collapse
you gave the right advice...
it's weird. I set adb as variable in windows environment and it worked till today.
Now I started a command prompt in another folder with adb in it and started adb... and it works. weird. I already uninstalled the drivers with usbdeview, restarted etc. a several times and it didn't work. Just use another adb-command finally worked...
thx
Code:
adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
HT852KV04159 device

Yeah, that happens to me sometimes, where it says the device didn't ACK, or something, but I just unplug it, plug it back it in, and wait a good minute it works flawlessly.
I guess our G1's just get moody sometimes, I know I would if someone changed my innerds and outterds on a regular basis xD

Adb problems

When I try to run ./adb devices or ./adb shell it always says device not found. Yes USB debugging is turned on too. I'm on a mac also.

chron12 said:
When I try to run ./adb devices or ./adb shell it always says device not found. Yes USB debugging is turned on too. I'm on a mac also.
Click to expand...
Click to collapse
Mac might be your problem. Have you made sure your drivers are installed correctly?
If you just let it auto-install drivers, try finding a manual download online.

Tivo7 said:
Mac might be your problem. Have you made sure your drivers are installed correctly?
If you just let it auto-install drivers, try finding a manual download online.
Click to expand...
Click to collapse
no need to install drivers on a mac. what mode is you phone in. Try both PC Mode and Charge only...I had a few dab problems myself...so much that I restored it back to stock..which fixed all of them. I am set up on a mac and use a little batch file to show and hide hidden folders, then I dropped adb into /bin folder so I didn't have to keep putting the ./ in front of dab.
-Try killing adb in activity monitor, then retyping adb devices...if that doesn't work,
- have you tried resetting your computer too? Mine weirds out every now and again and a restart fixes dab

Good suggestions, however,you can stop the adb service with adb kill-server
Try typing just adb by itself to get a list of options
Sent from my DROID BIONIC using xda premium

Need Help please [solved] !!!

I have Imilika's AOSP ICS ROM V6,
I changed the buid.prop
ro.sf.lcd_density=213
for tablet mode. after I reboot, my GNote is not booting. I cannot go to recovery mode or download mode.
Please help. I don't know what to do

Got it
OK, I was really sad about what happens to my phone, but finally I managed to fix it .
As I told you, my phone was not booting to recovery or download modes (key combinations not worked). finally I try to connect to PC via USB and luckily my PC could detect my phone . So i realized that the problem is the display not coming but phone is halfway booted.
So, I tried to change my build.prop via adb but failed due to cannot grant root permission (becoz display is off).
Finally I issue a adb commad to reboot in recovery mode.
"adb reboot recovery"
yeah, that command directly take me to the CWM recovery. then I flash AOSP v6 again.
Now, my phone is working again.
P.S. I just note this down for others if they get same problem future !

I have question.. I don't understand the term adb. What that actually and why need that? I did so many flashing so far and I didn't use this adb yet!

priyanv said:
I have question.. I don't understand the term adb. What that actually and why need that? I did so many flashing so far and I didn't use this adb yet!
Click to expand...
Click to collapse
If you don't know what ADB is, you probably shouldn't be flashing so regularly. Anyway, ADB stands for "Android Debug Bridge" and it is a protocol for device control, development, and debugging.
Sent from my GT-N7000 using Tapatalk

priyanv said:
I have question.. I don't understand the term adb. What that actually and why need that? I did so many flashing so far and I didn't use this adb yet!
Click to expand...
Click to collapse
adb is a connection type. we can run shell commands (in the phone), file transfer via adb by using our PC. for that we should have to enable usb debug mode in our mobile.
Actually you might used adb, when you root your phone in the first place . If you have CF-Root zip file, just extract it. you will see a folder called "files", in there you can see adb.exe .
If you need test run,
connect phone via USB(make sure you've enabled USB debug), open command prompt, navigate to that "files" directory.
run "adb shell ls" (to run "ls" command in phone)
run "adb push <anyfile in the PC> /system/sdcard/" (copy files from PC to sdcard)
like that

OK now I got it.. But why do we need to push some file like this when we are able to transfer files like mass storage??? Or what else can be done??? Sorry for the basic questions..

priyanv said:
OK now I got it.. But why do we need to push some file like this when we are able to transfer files like mass storage??? Or what else can be done??? Sorry for the basic questions..
Click to expand...
Click to collapse
Its functionality is not only to copy files from pc to mobile and vice versa.You can use it to get logs due to bad flashing,zip align apps,reboot into recovery,DL mode,normal reboot etc...

How to Solve 'Unauthorize Device' in ADB

Hello, im using O+ 3 and just installed the Oxygen 3.2.2 OS
I wanna root it but got problem because my ADB says unauthorized
Ive already tried to dig some similar case and possible answers thru the internet but none of them work for me
Ive tried to enable disable the debug permission
I also already make sure my ADB is the latest one.
Also already try to delete the 'adb_key' files from my PC (im using windows 7 64bit)
The problem is most user which has similar problem with me got the 'authorized debug prompt' popped up again on their phone, but its not working on my phone.
It appear only one time at the very first time i connect it to my phone, but i accidentaly click 'cancel' on that prompt
But after that it never re-appeared again.
Can someone kindly help me? Thanks a lot

Install the Android SDK or install the OnePlus 3 drivers
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

speedyjay said:
Install the Android SDK or install the OnePlus 3 drivers
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
What does the Android SDK do mate?
I never used it before, so would be great if u can give me some hints
Thanks

toughkid said:
Hello, im using O+ 3 and just installed the Oxygen 3.2.2 OS
I wanna root it but got problem because my ADB says unauthorized
Ive already tried to dig some similar case and possible answers thru the internet but none of them work for me
Ive tried to enable disable the debug permission
I also already make sure my ADB is the latest one.
Also already try to delete the 'adb_key' files from my PC (im using windows 7 64bit)
The problem is most user which has similar problem with me got the 'authorized debug prompt' popped up again on their phone, but its not working on my phone.
It appear only one time at the very first time i connect it to my phone, but i accidentaly click 'cancel' on that prompt
But after that it never re-appeared again.
Can someone kindly help me? Thanks a lot
Click to expand...
Click to collapse
Make sure debugging is clicked on under developer options in the main menu. Then disconnect the phone from the pc and reboot the pc. Reconnect the phone after it reboots and hope that you get the adb prompt on the phone again.

android sdk have the latest tools including latest ADB. There is ADB standalone install, that means that if you tell us that you have the latest ADB, that only mean that someone extracted the ADB and lastest fastboot and did a repack and in the end it's not an official repack.
but "disable the debug permission" reset all the recorded device for debug so you should have another prompt.
If in the end you don't have another prompt, verify you adb version by installing the lastest android SDK, uninstall and reinstall the oneplus drivers.
Then if no prompt there is 2 choices :
- wipe the phone, it will reset the prompt for sure, 100%
- use another computer (well you have to have another computer).

I have a computer at home where this happened and I have never been able to straighten it out...tried everything.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

tdamocles said:
Make sure debugging is clicked on under developer options in the main menu. Then disconnect the phone from the pc and reboot the pc. Reconnect the phone after it reboots and hope that you get the adb prompt on the phone again.
Click to expand...
Click to collapse
Le_Zouave said:
android sdk have the latest tools including latest ADB. There is ADB standalone install, that means that if you tell us that you have the latest ADB, that only mean that someone extracted the ADB and lastest fastboot and did a repack and in the end it's not an official repack.
but "disable the debug permission" reset all the recorded device for debug so you should have another prompt.
If in the end you don't have another prompt, verify you adb version by installing the lastest android SDK, uninstall and reinstall the oneplus drivers.
Then if no prompt there is 2 choices :
- wipe the phone, it will reset the prompt for sure, 100%
- use another computer (well you have to have another computer).
Click to expand...
Click to collapse
Hello sir, i've been trying all of this method, include the wipe the phone (except using another computer) but still no prompt re-appear. Another advice would be greatly appreciated.
Thanks

joho5 said:
I have a computer at home where this happened and I have never been able to straighten it out...tried everything.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Then how's in the end it goes mate? Do you root your phone? I just wanna root it, if u got any other way except the adb that would be great tho

toughkid said:
Then how's in the end it goes mate? Do you root your phone? I just wanna root it, if u got any other way except the adb that would be great tho
Click to expand...
Click to collapse
Have you checked all of your USB ports? I know in the past (with other phones), problems arise if you're not using a direct USB port (one soldered into your MoBo).

toughkid said:
Hello, im using O+ 3 and just installed the Oxygen 3.2.2 OS
I wanna root it but got problem because my ADB says unauthorized
Ive already tried to dig some similar case and possible answers thru the internet but none of them work for me
Ive tried to enable disable the debug permission
I also already make sure my ADB is the latest one.
Also already try to delete the 'adb_key' files from my PC (im using windows 7 64bit)
The problem is most user which has similar problem with me got the 'authorized debug prompt' popped up again on their phone, but its not working on my phone.
It appear only one time at the very first time i connect it to my phone, but i accidentaly click 'cancel' on that prompt
But after that it never re-appeared again.
Can someone kindly help me? Thanks a lot
Click to expand...
Click to collapse
Go to Control Panel > Hardware and Sound > Device Manager > expand Universal Serial Bus controllers. Now connect your phone. You'll now see USB Mass Storage Device. Right click on it. Select Properties, then go to Details. In the Details section, under Property, select Hardware ids. You'll then see the device id. It will be shown something like this: USB\VID_2A70&PID_9011&MI_01. From this you have to take the 2A70 code ~ the code between the first _ and &. Now go to desktop and create a new text document and copy paste this using your device id as shown:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x2A70
Now open the Save As menu. In Save As type select All Files. Save the file as adb_usb.ini
Copy this .ini file from desktop and paste it in C:\Users\YourPCName\.android
Disconnect your phone, reboot your pc. Now with USB Debugging turned on, connect your phone to your pc, you'll surely get the permission thingy popup in your phone.

For completion:
If you DO NOT have access to your phone for any reason but still want to use ADB you can simply boot your phone into TWRP and follow these steps.
Windows:
1. Open %userprofile%\.android
2. Copy "adbkey.pub" to your phone (adb push %userprofile%\.android\adbkey.pub /sdcard/adb_keys)
3. Switch to your phone.
4. Go to Advanced > Open Terminal
5. Type in "stop adbd"
6. Move "adb_keys" from /sdcard to /data/misc/adb (mv /sdcard/adb_keys /data/misc/adb/adb_keys)
7. Type in "start adbd"
8. Switch to computer
9. Type "adb shell setprop persist.service.adb.enable 1"
10. Type "adb shell setprop persist.sys.usb.config mtp,adb"
11. Reboot your phone - DONE
Linux / Maybe Mac:
Same steps, but use "~/" instead of "%userprofile%"
Please note:
You may have to repeat the steps 1-7 after boot when still not having permissions so it makes sense to use cp (copy) instead of mv (move) and only repeat steps 5-7.
Edit: Please also check if your drivers are all installed and enabled.
Sent from my OnePlus 2 using XDA Labs

?k