Related
Hi, this is my first compiled kernel for Samsung Galaxy S II I9100G. Compiled from Samsung's latest source code. Compatible with DZKI1 firmware.
No mods or optimizations yet - I just added CWM-based Recovery v5.0.2.6 I pulled from another kernel.
Credits:
nunon4 - for pointing out link to rooted kernel here - http://forum.xda-developers.com/showpost.php?p=18744675&postcount=85 - this was where I pulled the initramfs with recovery from
Unknown dev who created the above kernel
CLockworkmod developers
Disclaimer:
I'm not responsible for any damage to your phone, other properties or persons due to you using this kernel.
Everything seems to work for me, but I haven't fully tested it yet - please tell me if you have any problems.
Instructions:
1. Downloaded from the attached link.
2. Flash with Odin.
Changelog:
v0
Initial release - CWM5, Root
v1.1
added CIFS support - mount Windows shares using CifsManager from Market
removed debugging information from modules to reduce file sizes
v1.1.1
Bugfix - phone keeps booting into recovery in v1.1
You are a MAN!! Great job!!! looking forward for optimization.
Since it have CWM5, The custom ROM will follow now.
aidfarh said:
Hi, this is my first compiled kernel for Samsung Galaxy S II I9100G. Compiled from Samsung's latest source code. Compatible with DZKI1 firmware.
No mods or optimizations yet - I just added CWM-based Recovery v5.0.2.6 I pulled from another kernel.
Credits:
nunon4 - for pointing out link to rooted kernel here - http://forum.xda-developers.com/showpost.php?p=18744675&postcount=85 - this was where I pulled the initramfs with recovery from
Unknown dev who created the above kernel
CLockworkmod developers
Disclaimer:
I'm not responsible for any damage to your phone, other properties or persons due to you using this kernel.
Everything seems to work for me, but I haven't fully tested it yet - please tell me if you have any problems.
Instructions:
1. Downloaded from the attached link.
2. Flash with Odin.
Click to expand...
Click to collapse
thank for the Kernel... can this kernel overclock?
serge327 said:
thank for the Kernel... can this kernel overclock?
Click to expand...
Click to collapse
No, not yet.
Sent from my GT-I9100G using XDA App
Any chance of tweaking the charge rate in this kernel to allow the use of higher output chargers like the ipad charger that outputs 3 times the current of the stock one? The stock charge rate is locked to 650ma which is close to the output of the stock charger that came with the phone, regardless of which ac charger you use. Don't even mention the charge rate when plugged into a usb port.
my biggest gripe so far with this otherwise excellent phone.
Jacking up the limit to around 3000ma on both ac and usb, and letting the phone draw the maximum current that the adapter can supply would really speed things up.
bcky84 said:
Any chance of tweaking the charge rate in this kernel to allow the use of higher output chargers like the ipad charger that outputs 3 times the current of the stock one? The stock charge rate is locked to 650ma which is close to the output of the stock charger that came with the phone, regardless of which ac charger you use. Don't even mention the charge rate when plugged into a usb port.
my biggest gripe so far with this otherwise excellent phone.
Jacking up the limit to around 3000ma on both ac and usb, and letting the phone draw the maximum current that the adapter can supply would really speed things up.
Click to expand...
Click to collapse
Do you have an idea on how to go about doing that? I'm actually a novice in this modding business, so I can't really do any original mods, but I can try to incorporate mods that others have done, providing that instructions are provided.
Having said that, I'm actually reluctant to attempt mods that tamper with voltage or current settings like what you're proposing. Maybe there's a good reason Samsung has limited the charging current. I don't want to fry my phone.
For now, I'm looking at mods that improve functionality, like BLN or CIFS. Maybe some overclocking of the CPU/GPU at later stage once I have more understanding of the platform.
Already use it..awesome!! But after that I see a yellow triangle at boot...why?
lockmunk said:
Already use it..awesome!! But after that I see a yellow triangle at boot...why?
Click to expand...
Click to collapse
That's normal when you use custom kernels. It would disappear if you reflash with a stock kernel.
root your phone first, then install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher and you will won't see the triangle anymore.
jlieu said:
root your phone first, then install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher and you will won't see the triangle anymore.
Click to expand...
Click to collapse
i am new to android..can u teach me step by step?i dont understand this "install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher"
jlieu said:
root your phone first, then install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher and you will won't see the triangle anymore.
Click to expand...
Click to collapse
Kernel flasher hmm. Can i use app like Chainfire CWM app or Hellcat App the flash the zimage?
antt00 said:
Kernel flasher hmm. Can i use app like Chainfire CWM app or Hellcat App the flash the zimage?
Click to expand...
Click to collapse
I tried both those apps on my device. They didn't work.
So, just choose as PDA and click start?
i just installing miui rom.. but somehow.. my phone brick..
but is ok since i backup my current rom..
can anybody test flashing miui rom with this kernel?
So far so good. I'll keep monitoring for any bugs.
Good job for the Kernel too
mdrizal said:
i just installing miui rom.. but somehow.. my phone brick..
but is ok since i backup my current rom..
can anybody test flashing miui rom with this kernel?
Click to expand...
Click to collapse
Are you using G version phone? Also does Miui or any other custom rom for i9100 even work on i9100G?
thanks! great job as startings to the i9100G
G
antt00 said:
Are you using G version phone? Also does Miui or any other custom rom for i9100 even work on i9100G?
Click to expand...
Click to collapse
i don't think they are the same, so must wait longer so some dev to start with the G variant
can anybody test flashing miui rom with this kernel?
Click to expand...
Click to collapse
Just did, and it works.
This kernel is compatible with the latest MIUI (1.14.0), at least for me
I added CIFS support. Now you can use CifsManager or similar app to mount Windows shares. See first post.
Hi everyone, as I said in the title I have some questions about the usb host support on galaxy s gt i9000 with cyanogenmod 10 stable.
Everything started with the desire to attach my xbox 360 controller to my phone, unfortunately I realized it was not so easy on my model; so I started digging on the internet trying to find a way to achieve what I was seeking.
Everything that has to do with the usb host support is only a matter of software (kernel) or harware aswell?
Is my i9000 doomed to stay with this support forever?
And the Big question, does cyanogenmod 10 have this support? Is the kernel of this wersion supposed to have this support?
Thanks to everyone who can help me...
Nice. Today i have near the same question. But, i think, i can help you a bit.
The USB-Host-Support is coming with the kernel. One of them with support should be Semaphore.
But i have at least the same question.
I have Fishears Rom installed, but can´t get the app "usb host controller" working, because it is missing the S3C USB Host driver.
Does anyone know, how i can get it working with fishears?
Thanks
purdy said:
Nice. Today i have near the same question. But, i think, i can help you a bit.
The USB-Host-Support is coming with the kernel. One of them with support should be Semaphore.
But i have at least the same question.
I have Fishears Rom installed, but can´t get the app "usb host controller" working, because it is missing the S3C USB Host driver.
Does anyone know, how i can get it working with fishears?
Thanks
Click to expand...
Click to collapse
Thank you..
I have the same problem with the app,same s3c usb host driver missing...
Let's just hope someone can help us...
Have you tried Semaphore Kernel? I think, this will run. Can´t try it atm, because it doesn´t work with físhears
purdy said:
Have you tried Semaphore Kernel? I think, this will run. Can´t try it atm, because it doesn´t work with físhears
Click to expand...
Click to collapse
mmm...semaphore eh? do I have to change rom? are u talking about kernels only?
IMO this Feature is coming for the sgs with specific kernel. And Semaphore Kernel has this feature in his Feature-List.
purdy said:
IMO this Feature is coming for the sgs with specific kernel. And Semaphore Kernel has this feature in his Feature-List.
Click to expand...
Click to collapse
mmm..ok but I have also read that cm10 has the usb host but it doesnt look like it
Ok. So, we have to wait that anyone who knows this will take a look in this thread
purdy said:
Ok. So, we have to wait that anyone who knows this will take a look in this thread
Click to expand...
Click to collapse
This forum si useless...ridiculous that whit all those members se cant get some help...nave you round something?I just bought my otg cable..I will register in some other forum because this si embarassing...
http://forum.xda-developers.com/showthread.php?p=21503469&postcount=6#post21503469 read this and http://forum.xda-developers.com/showthread.php?t=784270 it will help you bro
Most 4.2 kernel already supported USB otg, but needed external power host on it, don't know bout Xbox but if our on 4.2, juz find some otg controller on stores n try it
If not, need to find some kernel that support but most otg supported kernel starts at cm9 as base.
Semaphore kernel is provide good usb-host compatibility. I using it now. Look at this message http://forum.xda-developers.com/showpost.php?p=41939030&postcount=552
I will try another populary kernels later.
help me
compacity said:
Most 4.2 kernel already supported USB otg, but needed external power host on it, don't know bout Xbox but if our on 4.2, juz find some otg controller on stores n try it
If not, need to find some kernel that support but most otg supported kernel starts at cm9 as base.
Click to expand...
Click to collapse
Are you sure about that? iwant to upgrade my cm9 to 10.2 or 11 for /datadata problem on cm9,but i need OTG.for upgrade to cm10.2 or 11 i want to sure OTG work on them.(galaxy s i9000).
nigox91 said:
Hi everyone, as I said in the title I have some questions about the usb host support on galaxy s gt i9000 with cyanogenmod 10 stable.
Everything started with the desire to attach my xbox 360 controller to my phone, unfortunately I realized it was not so easy on my model; so I started digging on the internet trying to find a way to achieve what I was seeking.
Everything that has to do with the usb host support is only a matter of software (kernel) or harware aswell?
Is my i9000 doomed to stay with this support forever?
And the Big question, does cyanogenmod 10 have this support? Is the kernel of this wersion supposed to have this support?
Thanks to everyone who can help me...
Click to expand...
Click to collapse
You can do it by using semaphore kernel. But you will need external supply
Hello guys
First, big fat disclamier:
THIS IS NOT WORKING. Please don't try this for fun, only if you're willing to put in some time to help me get this fixed.
@djolivier and @letama worked out a way to get CM10 running on Xperia S with locked bootloader, loosely based on the work @atis112 did for Xperia U.
For the past couple of days I've been trying to port it to our beloved T.
It does sort of boot but there is nothing on screen. Logcat is working however and so is adb shell (though no su) so we have some way of debugging.
At the moment there is a working recovery (CWM 6.0.4.6 for locked BL by @davidmarco), enter it by pressing vol+ when the led is blue (it will turn green, then red). Here you will have an su shell and you can get dmesg and /proc/last_kmsg.
Please read the thread by djolivier to get an idea of how it works. In the last couple of pages you will find everything I have tried so far and some insightful answers from letama.
So the main thing now is to hunt down which are the libs/drivers we need.
I will try to get some more info into this thread asap but first I wanted to get it up so those of you who think they can help can get going.
Download
cm10_lb_mint_b12.zip - 188.72 MB
This includes the .489 stock kernel, which is probably the best for compatibility.
XDA:DevDB Information
CyanogenMod for Locked Bootloader, a ROM for the Sony Xperia T
Contributors
TiMiN8R, letama, djolivier
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-01-08
Last Updated 2014-01-08
Reserved
I think someone starting this off is a great idea, when i have some free time i'll try to offer you some help mate.
But need to get up to speed with it all from djolivier's thread before anything else. But i'm happy to offer some help when i can, if that be testing, or general de-bugging.
This is awesome.keep up Timn8r
Sent from my LT30p using XDA Premium 4 mobile app
How about asking letama for help? He was the one getting this to work on Xperia S..
By the way, really appreciate you doing this.. Was already waiting for someone to try this on our devices!
When it boots up I will try to flash the 30p to 25i patch and see if it works!
Sent from my LT25i using xda app-developers app
WhiteNeo said:
How about asking letama for help? He was the one getting this to work on Xperia S..
By the way, really appreciate you doing this.. Was already waiting for someone to try this on our devices!
When it boots up I will try to flash the 30p to 25i patch and see if it works!
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
Letama already helped me a lot over in the other thread, getting it up to this point. But now we need to find some very device specific stuff, that's best left to the people who actually have the device to test and debug. My time is limited this week and I don't have a need for this since mine is unlocked, it's just for the sport, so I figured, let's get some other people in on the action
Sent from my Xperia T using XDA Premium 4 mobile app
now im not too sure of this so i maybe completely wrong so please correct me if i am but im sure i read somewhere that the CM kernel drivers and STOCK kernel drivers differ in some way or another ..... again i repeat im not certain on this but if this is the case then certain things in the rom may need redirecting to the STOCK drivers rather than CM drivers as they done exist? ..... if i am right i wouldn't have a clue where to start to be honest but obviously you cant change the drivers in the kernel because then it wouldn't work on LB ..... perhaps ask rimmer for some help or advice as he ported MIUI to stock?
oddeceed said:
now im not too sure of this so i maybe completely wrong so please correct me if i am but im sure i read somewhere that the CM kernel drivers and STOCK kernel drivers differ in some way or another ..... again i repeat im not certain on this but if this is the case then certain things in the rom may need redirecting to the STOCK drivers rather than CM drivers as they done exist? ..... if i am right i wouldn't have a clue where to start to be honest but obviously you cant change the drivers in the kernel because then it wouldn't work on LB ..... perhaps ask rimmer for some help or advice as he ported MIUI to stock?
Click to expand...
Click to collapse
Yes that's just about right. We cannot change the drivers in the kernel but what we can do, and what I've been trying to do, is trying to match the drivers in the rom with the kernel, i.e. swapping out CM drivers for drivers from the stock .489 firmware. But there are quite a lot, that's why we need more people trying, testing, debugging. We could go another way, namely build new CM from source to match the kernel but that's beyond me I'm afraid.
letama said:
There is no easy way to solve that I'm afraid. You can try to play with dlls (check this for a list), but it has big chances to fail. The proper way to do that is to get fxp repo, patch hal to match stock kernel and recompile cm.
Click to expand...
Click to collapse
If @Rimmer1966 wants to help he is welcome of course.
TiMiN8R said:
... there are quite a lot, that's why we need more people trying, testing, debugging. We could go another way, namely build new CM from source to match the kernel but that's beyond me I'm afraid.
Click to expand...
Click to collapse
i know less than you and stuck on windows 8.1 which makes it even harder for me to do anything to help .... i hope that this can get up and running ..... providing you can get screen and touch working its more than enough proof of concept of what can be achieved and if enough different devices get going this way then maybe just maybe teams like CM will revert back from thier custom kernel (which i dont like) and start using stock kernels in builds (we can all dream right?)
Any updates on this? I can help as a beta tester or help with building on my pc.
masterjet said:
Any updates on this? I can help as a beta tester or help with building on my pc.
Click to expand...
Click to collapse
Not much going on on my end. I've been running on the leaked stock 4.3 for the last few days. I did have a little go on using the kernel from that rom to boot CM10.2 but I've not made much progress, seems that SELinux is throwing a spanner in the works.
If anyone wants to have a go, here's what you can do. Get the stock .489 here.
We should try swapping out .so in /system/lib/hw one at a time. You can do this by booting to CWM, mount /system and adb push, chmod 0644 the file and reboot. Get a logcat, reboot to CWM and get dmesg and last_kmsg
Code:
adb logcat > logcat
adb shell cat /proc/last_kmsg > last_kmsg
adb shell dmesg > dmesg
Lather, rinse, repeat. It is a slow and tedious process, so the more the merrier
TiMiN8R said:
I replaced hwcomposer.msm8960.so, that seems yo have fixed it. Also tried a couple of others that didn't work: gralloc.msm8960.so (can't start), copybit.msm8960.so (brought back the camera probs). Still no screen.
Most prominent spam now is
Code:
smd_pkt_open: DATA5_CNTL open failed -19
I also noticed this in logcat
Code:
I/clearpad_fwloader( 681): hanlde_arg: option = [default]
I/clearpad_fwloader( 681): hanlde_arg: saved.module_id = [0x32]
E/clearpad_fwloader( 681): read_sysfs: Unable to open /sys/devices/virtual/input/mice/name
E/clearpad_fwloader( 681): read_sysfs: Unable to open fwfamily
That is the touchscreen. There is indeed no /sys/devices/virtual/input/mice/name. I'm not sure if it is related to the no video issue but it's a problem nonetheless.
Click to expand...
Click to collapse
Thread is dead? No updates, no progress?
masterjet said:
Thread is dead? No updates, no progress?
Click to expand...
Click to collapse
Seems a bit of a dead end. Our stock kernel just seems to be to different from the stock kernel.
No-one else seems to want to pitch in and try some stuff out.
Might have another go with 4.3 when the official Sony's finally out.
it might be a stupid idea but why dont we swap out every .so file from the miui rom witch works with the stock kernel?
like i mentioned before
Why don't we try to do what they did with the moto defy/bravo and run a 2nd init. http://www.google.com/url?sa=t&sour...9ICIDA&usg=AFQjCNHMzrlHTlHC4EjfkhTkZxavJbEJow
lordyka said:
it might be a stupid idea but why dont we swap out every .so file from the miui rom witch works with the stock kernel?
Click to expand...
Click to collapse
If you had read the other thread, you would have known that I've already tried a lot of .so's from stock firmware but nog all of them work. This is the hard part, finding the ones that work.
jewkhok said:
Why don't we try to do what they did with the moto defy/bravo and run a 2nd init. http://www.google.com/url?sa=t&sour...9ICIDA&usg=AFQjCNHMzrlHTlHC4EjfkhTkZxavJbEJow
Click to expand...
Click to collapse
Well the first part, the hijacking, is exactly what does mod is doing. With regards to the 2nd-init program, I'm not sure that init itself is the problem. The "only" problem we have is finding drivers/libs that are compatible with both CM and stock kernel. But I could be off though. If someone wants to build us a 2nd-init go right ahead
Wow just came back to the T forums to see how things were going and I see this! Hopefully Tim can port it I'm sure he can
Sent from my XT1058 using Tapatalk
I honestly don't think 2nd init would make a big difference, as TiMiN8R has already stated, the problems are the drivers. You can now either ask FXP to use drivers from the Sony 4.3 Stock kernel or do it yourself...
Good luck on this, you'll surely make it.
Gesendet von meinem Xperia S mit Tapatalk
got the source codes?
I'm thinking about doing the same with Z1, wouldn't mind take a look at your work
If you asked me: here are the sources.
Gesendet von meinem Xperia S mit Tapatalk
antutu is reporting greater performance
exfat is included
the sources are here:
https://github.com/lucize/android_kernel_motorola_omap4-common
maintained tree
https://github.com/lucize/android_kernel_motorola_omap4-common/commits/cm-11-dss
please understand that this is work in progress
use Safe Strap 3.65+ or overwrite the files in the full rom image
09.03.2015: more dss update, i2c update, almost all asoc update
04.03.2015: bfq update, minor dss update
02.03.2015: update to CM + latest gpu drivers for cm11 (the kernel with dss it needs supported hwcomposer.maserati.so)
24.07.2014: update to CM + more DSS merge
24.06.2014: update to latest vulnerability fixes from CM
19.03.2014: hdmi from 3.4, should work on the rest of displays and avr
18.03.2014: HDMI working (720p for me over HDMI), 1080P over DVI, movies 1080p over HDMI. glad I didn't wasted last months on nothing
17.03.2014: WIP HDMI, for me is working (negative colors) only with DVI adapter (philips monitor), please test on other model, + more 3.0.31 merges.
18.02.2014 - disabled HDMI, enabled SmartRelfex3, improves standby, hopefully also fixes no sound issue.
14.02.2014 - added latest fixes from stargo's git, hoping usb update will fix data connectivity.
Regards
XDA:DevDB Information
[Kernel][3.0.31]+, Kernel for the Motorola Droid 4
Contributors
lucize
Kernel Special Features:
Version Information
Status: Stable
Created 2014-07-24
Last Updated 2015-03-09
Which rom is it compatible with? Stock, CM11?
Should be any compatible with any cm version.
Sent from my XT894 using xda app-developers app
Hi lucize! It's possible that this kernel+cm11 bring a working HDMI?. Thanks!
Didn't had a micro hdmi cable to test, the modem problem seems to be introduced in the 3.0.8 by the latest changes so maybe this would not be a problem after some reverts
Sent from my XT894 using xda app-developers app
Hi,
thanks for your great work!
lucize said:
Didn't had a micro hdmi cable to test, the modem problem seems to be introduced in the 3.0.8 by the latest changes so maybe this would not be a problem after some reverts
Click to expand...
Click to collapse
If you pulled in my changes, then yes, I'm guilty. I think I've now fixed this problem again, just get my last change to drivers/usb/host/ehci-omap.c and it should work again.
About hdmi: It's not so simple
The moto HDMI-stuff needs to be migrated into the OMAP HDMI-driver to get it working without (missing) proprietary userspace parts (parts of the hardware-composer which call libhdmi).
I think I'll take a look at your kernel-changes on the weekend.
Regards,
Michael
in my opinion it would be the best to focus on HDMI.
Im waiting for a custom rom with HDMI. stock rom is slow but HDMI is working and I use it really often for watching TV shows with CineX serien and the lapdock would be usable.
Please focus on HDMI
sm4rty said:
in my opinion it would be the best to focus on HDMI.
Im waiting for a custom rom with HDMI. stock rom is slow but HDMI is working and I use it really often for watching TV shows with CineX serien and the lapdock would be usable.
Please focus on HDMI
Click to expand...
Click to collapse
I got a micro hdmi cable, i'll try to do my best, currently is starting but I don't have video neither on hdmi neither on the phone display and I can't seem to make my adb shell working.
Regards
if you get HDMI working you should setup a donation link
it would be so great using kitkat and the webtop. I would be so happy. sadly im no developer and dont have any glue on how to do this :/
sm4rty said:
if you get HDMI working you should setup a donation link
it would be so great using kitkat and the webtop. I would be so happy. sadly im no developer and dont have any glue on how to do this :/
Click to expand...
Click to collapse
for the moment this is all we got
http://forum.xda-developers.com/showpost.php?p=50109877&postcount=4554
acording to @dtrail1 after some combined work the kernel is good
now that I got the cable of course I will try, at the moment I try to understand what is missing
Regards
Battery life on this Kernel is great but 3G internet stopped working every time when I use it for a while.
X_Files said:
Battery life on this Kernel is great but 3G internet stopped working every time when I use it for a while.
Click to expand...
Click to collapse
I'll update it some moments, right now I'm testing a merge of stargo and dtrail1 work, it has multiple options (overclocking and underclocking) and is very stable, but I have a crash in dmesg (not afecting performance or stability, only visual discomfort) that is not happening on razr (spyder).
Regards
X_Files said:
Battery life on this Kernel is great but 3G internet stopped working every time when I use it for a while.
Click to expand...
Click to collapse
try with the new upload, I'm testing it right now, hopefully usb changes fixes the modem problem
Regards
what's the correct way to install these? tried flashing both in SS 3.11 and got black screen; return to menu.
ended up copying the kernel.zip files into the signed CM11 nightly .zip and flashing, which appears to have worked... except I'm not seeing the lower 100mhz clock speed or higher (above 307) GPU setting when I enter trickster mod.
recos?
lastly, what's the difference between kernel.zip and kernel_jbx.zip?
thanks!
beflythis said:
what's the correct way to install these? tried flashing both in SS 3.11 and got black screen; return to menu.
ended up copying the kernel.zip files into the signed CM11 nightly .zip and flashing, which appears to have worked... except I'm not seeing the lower 100mhz clock speed or higher (above 307) GPU setting when I enter trickster mod.
recos?
lastly, what's the difference between kernel.zip and kernel_jbx.zip?
thanks!
Click to expand...
Click to collapse
jbx is the over/under clocked kernel, you have to install it in ss, I only tested them on cm11 and I have ss 3.65, maybe I'll try to see why is not flashing correctly under ss 3.11
the kernel.zip is the clean 3.0.31 but is not 100% 3.0.31.
I'll update it with some new changes, hdmi disabled everywhere because I see that I got very good battery without it.
Regards
I'm happy to say that latest kernel has great standby and so far I had no crash on nothing and also updated the jbx kernel
Regards
Lucian
i would be glad to know if you have made any achievements on hdmi?
or is it impossible to get it working?
I believe that with the older version of lucize's kernel (newest dont because it seems to be disabled by default) + this hack http://forum.xda-developers.com/showthread.php?t=2082827 meaby get some buggy thing working...but I don't be sure... stargos tested time ago and work but it had wrong resolution...but , again, it will be a bugged thing...
sm4rty said:
i would be glad to know if you have made any achievements on hdmi?
or is it impossible to get it working?
Click to expand...
Click to collapse
first time I what it to be stable and after that we will work on hdmi too, so far so good, I have excellent standby and no crashes
there are hdmi things that can be ported from 3.4, I saw panel init and stuff like that missing from this kernel so I think it should be doable
and a picture with current battery status, I must say that this is the first time I see something like this, and in the middle of the week.
Regards
Thanks for great work
Olympus Unofficial OmniROM 4.4.4 PREVIEW test
This is a development thread .
This is a Omni4.4.4 firmware for Atrix. It's not a official Omni.
Quote:
Disclaimer: THIS FIRMWARE IS IN ALPHA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
This ROM uses the kernel 3.1.10, from Olympus Kernel Project:http://forum.xda-developers.com/showthread.php?t=2016837
WHAT IS WORKING?
ART
Bluetooth (Instable)
sound
wifi
need more testing...
WHAT ISN'T WORKING?
need more testing...
Battery statistics 100% Unknown
recovery(Thank Zn7mkUKzN1r8aCIV):
http://forum.xda-developers.com/showthread.php?t=2613829
ROM：The new
Wait until the restoration of some of the other bug, hope to help test.
ROM：201408062225
<s>http://d-h.st/iq6 </s>
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Thanks to all the users for using and debugging.report all bugs here,Thank
I'm fixing the digitizer of my second atrix, definitely i'm going to test it and help you with logs. Keep on the good work.
Best regards.
fengyr said:
Olympus Unofficial OmniROM PREVIEW test
This is a development thread .
This is a Omni4.4.4 firmware for Atrix. It's not a official Omni.
Quote:
Disclaimer: THIS FIRMWARE IS IN ALPHA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
This ROM uses the kernel 3.1.10, from Olympus Kernel Project:http://forum.xda-developers.com/showthread.php?t=2016837
WHAT IS WORKING?
ART
Bluetooth
need more testing...
WHAT ISN'T WORKING?
WIFI (Unable to search)
Audio
need more testing...
recovery(Thank Zn7mkUKzN1r8aCIV):
http://forum.xda-developers.com/showthread.php?t=2613829
ROM:http://d-h.st/Dgo
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Thanks to all the users for using and debugging.report all bugs here,Thank
Click to expand...
Click to collapse
Way cool, will backup can test what's listed as working and see if i can find more of what's not working.
Thanks
Has changed the default language en_US.Update rom url
Not bad!
So I gave this test ROM a try. It's nice to see KitKat running on an Atrix 4G! I'm so excited to see some progress!
However, there are definitely several issues with it. The problems I found are:
Calls/text doesn't work
Mobile data doesn't work (says AT&T 4G but no connection)
SuperSU doesn't appear to work (crashed when opening and wouldn't let an app have root access)
Bluetooth didn't turn on for me (but I see you seemed to get it working, maybe it was just bad luck)
No WIFI (doesn't scan as you stated in the post)
Couldn't test any apps or camera because I couldn't restore my apps without root, and the camera must be a part of gapps now, which I also didn't install.
I was also gonna post some screenshots but it wouldn't let me snapshot (said storage error?)
Just thought I would sum up my experience so far. Thanks for letting us test out this promising new ROM! :good:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
thecjan said:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
Click to expand...
Click to collapse
K's kernels are CM9 and CM10.1 based. This is a CM11 based kernel with a build date of 6 Aug 14
Calls - No go
BT (file transfer) - Go
Wifi - same as OP reported
Battery - same as OP reported (There's no way that after 8 hrs it should still be at 100%)
Speakers/Headphones - No go
Apollo/DSP Manager - Crash
Ravilov's Battery Fix app - scripts not able to be executed
Thanks!!!
Mobile data seems to be working, Bluetooth and superuser. ART included, I'll do more testing later.
thank for the rom!
thecjan said:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
Click to expand...
Click to collapse
Don't be harsh to K, as I was fixing audio segfault in CM 4.4.4, the more I realized most of the audio problem (like Skype, Bluetooth error) is more ROM related than Kernal related. Most of them are due to incompatiblity of hardware HAL files in our unfinished Moto's 4.0 rom...... Of course Mobile Data HAL is sill PAIN IN THE AXX... ...
Zn7mkUKzN1r8aCIV said:
Don't be harsh to K, as I was fixing audio segfault in CM 4.4.4, the more I realized most of the audio problem (like Skype, Bluetooth error) is more ROM related than Kernal related. Most of them are due to incompatiblity of hardware HAL files in our unfinished Moto's 4.0 rom...... Of course Mobile Data HAL is sill PAIN IN THE AXX... ...
Click to expand...
Click to collapse
And what about to use - for now - the old kernel like epinter's CM10?, in XOOM kitkat they use and old 2.x kernel too, the hardware acceleration its not really a problem compared to use and unfinished kernel with more issues to solve.
Anyway we agree that Kristianp is doing it's best work to continue developing the 3.1 kernel, so any negative comentary should not be allowed as most of us are only users and some cooperate with minimal things.
I could boot my second atrix, now time to BL Unlock, root, etc and it's ready to test some KK roms.
It's great to see the "4.4.4" in the settings
Mobile internet works fine.
Kitkat feels quite snappy on this "too old, too slow" hardware.
Thank you so much for keeping the Atrix alive.
Will try to install the Play Store and test out some apps!
cannot wait to try this!
Booted up fine and looks slick. had to do some searching around to find how to switch to ART.
Also had to use Z's recovery_4.3.img... ROM won't install with TWRP.
Wish I could do more testing like battery but it's not feasible at the moment.
Looking forward to other releases to test.
Really love the tons of options available in KK.
phoenixgfx said:
Booted up fine and looks slick. had to do some searching around to find how to switch to ART.
Also had to use Z's recovery_4.3.img... ROM won't install with TWRP.
Wish I could do more testing like battery but it's not feasible at the moment.
Looking forward to other releases to test.
Really love the tons of options available in KK.
Click to expand...
Click to collapse
Which version of TWRP?
palmbeach05 said:
Which version of TWRP?
Click to expand...
Click to collapse
I think 2.6... not so sure.
TWRP 2.6.3 gives errors and aborts installation.
phoenixgfx said:
I think 2.6... not so sure.
Click to expand...
Click to collapse
Basmatek said:
TWRP 2.6.3 gives errors and aborts installation.
Click to expand...
Click to collapse
I believe, based off of what i've seen, 2.6.3.0 is the minimum to flash 4.4 ROMs, but 2.7 is reccommended.
Sent from my MB886 using xda app-developers app
There's no 2.7 for Atrix and apparently there's also no 4ext Recovery, so the only ways are CWM or Z's recovery (will try Z's on Monday or Tuesday)
Sent from my Nexus 7 using XDA Free mobile app
Thank friends test feedback .
Apply a new job,computer is not in my city, so the update rate slow down (my technique is limited).
I look forward to Z 4.4.4
please forgive my terrible english.
Please upload it to a diferrent pleace