Database Develop

[Q] Phone will only succesfully flash certain roms

Hey guys!
I have a problem, and to be perfectly honest I am not a massive expert at this sort of stuff, but bare with me.
I am trying to install Virtuous ICS Rom RC2 on my Incredible S, but once I've done so it won't boot past the HTC logo. Tried a clean wipe (factory reset/cache/dalvik cache), and even changing from EXT3 to EXT4 and back, but nothing works. Now, I've had this problem before with other various ROMs, and it seems that I can only get flawless installs and boots from Cyanogenmod 7.1 and MIUI (not the ICS version).
Currently running 4EXT recovery and MIUI, but I want the ICS rom really bad, and other Incredible S users are flashing without any problems, so I'm not sure what gives.
Any and all help would be appreciated (and sorry if this is a noob-ish question and/or in the wrong forum)!

Make sure you have the newest ClockWork Recovery Mod installed. If you do try reinstalling it and an engineering hBoot. I would say the problem would be that one of those are corrupt.

I will try both of those and get back to you with the results! Thanks!

Okay, so I updated CWM to 5.0.2.0, which did not do anything. When you say reinstall, do you mean a completely removal of CWM and then installing it again? Because I'm not sure how to do that.
Also, as usual, MIUI 1.2.30 installs just fine, but I just tried installing MIUI 2.12.13 and ended up in a bootloop. So, thus far, I can only flash two roms; CM7.1 and MIUI 1.2.30. These two were the first two roms I ever flashed, not sure if that has anything to do with anything but I thought it might be worth mentioning.

Unlocked bootloader with htcdev? You might need to reflash the boot.img from your desired rom's zip file with the command
Code:
fastboot flash boot boot.img

i think you should flash the new ROM image
please refer the the post
http://forum.xda-developers.com/showthread.php?t=1337105

How do I flash a ROM via HBOOT? Do I just load it up, wait for the SD card to be read then plug it in via usb, go to cmd and type in the necessary prompts, and the boot.img file from my rom.zip will be flashed?

Hexykins said:
How do I flash a ROM via HBOOT? Do I just load it up, wait for the SD card to be read then plug it in via usb, go to cmd and type in the necessary prompts, and the boot.img file from my rom.zip will be flashed?
Click to expand...
Click to collapse
Read the FAQ sticky post for info on how to flash the boot.img file in a custom ROM.zip file.

Will do, thanks guys, wish me luck.

The correct first question is: Is the OP S-Off or HTC unlocked? if it's the latter, follow Nonverbose's advice.

My phone is S-OFF.

Hexykins said:
My phone is S-OFF.
Click to expand...
Click to collapse
Please boot into Fastboot mode and run the following:
Fastboot getvar all
And post the results so we can see how your phone is currently set up

Okay, so I highlighted FASTBOOT and pressed the power button, then plugged in the USB and it changed to FASTBOOT USB. However, my PC doesn't find my phone, so I can't run the cmd prompts. Should I just go through the steps listed in http://forum.xda-developers.com/showthread.php?t=1337105?

Hexykins said:
Okay, so I highlighted FASTBOOT and pressed the power button, then plugged in the USB and it changed to FASTBOOT USB. However, my PC doesn't find my phone, so I can't run the cmd prompts. Should I just go through the steps listed in http://forum.xda-developers.com/showthread.php?t=1337105?
Click to expand...
Click to collapse
No that would not be applicable in your case from what you have told us. If you are S-Off and have a custom ROM installed, then you probably don't have HBOOT 1.16 or 2.00. That is why I wanted you to get the Fastboot getvar all information.
Have you installed HTC Sync on your PC to get the appropriate drivers set up?

Just installed HTC Sync and got all the appropriate drivers. Still won't show up as a disk when I'm in Fastboot, but I'm guessing it's not supposed to either.

Hexykins said:
Just installed HTC Sync and got all the appropriate drivers. Still won't show up as a disk when I'm in Fastboot, but I'm guessing it's not supposed to either.
Click to expand...
Click to collapse
No it won't show as a disk drive. Open a command window and set the working directory to the one where you installed adb.exe and Fastboot.exe and then type:
Fastboot devices and it should respond with your device serial number. If it does then you can type:
Fastboot getvar all

Here you go, sorry it took so long, had to set up a few things:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hexykins said:
Here you go, sorry it took so long, had to set up a few things:
Click to expand...
Click to collapse
Ok you still have S-Off and now that you have fastboot working I would try reflashing CWM 5.0.2.0 recovery image in fastboot mode.
Copy the CWM recovery.img file to the directory where you have fastboot.exe. If you have a zip file for CWM5.0.2.0 then open the zip and copy the .img file.
Then in fastboot mode type the command:
fastboot flash recovery recovery.img
Then I would try flashing Virtuous ICS.

Hm, sadly that didn't help, it still just bootloops and/or get stuck on the bootscreen (depending on the ROM, tried both the Virtuous ROM and the new MIUI).

Hexykins said:
Hm, sadly that didn't help, it still just bootloops and/or get stuck on the bootscreen (depending on the ROM, tried both the Virtuous ROM and the new MIUI).
Click to expand...
Click to collapse
Full wipe (data,cache,dalvik)

HTC One S-On & stock rom erased!

Hey Guys,
I previously submitted another thread with my issue. I just really need some help on this. I was trying to flash another rom on phone but did not notice S-On until it was done. Going thru the custom rom install, I wiped everything even my recovery backups. All i can do now is boot into HBoot, Fastboot, or TWRP recovery. How can I get pass this problem? Is there a way I can get S-Off in fastboot mode only? Please I need access to my phone
Thanks

darkghostnit said:
Hey Guys,
I previously submitted another thread with my issue. I just really need some help on this. I was trying to flash another rom on phone but did not notice S-On until it was done. Going thru the custom rom install, I wiped everything even my recovery backups. All i can do now is boot into HBoot, Fastboot, or TWRP recovery. How can I get pass this problem? Is there a way I can get S-Off in fastboot mode only? Please I need access to my phone
Thanks
Click to expand...
Click to collapse
You don't need S-OFF to flash ROMs.
Please post a "fastboot getvar all" so that so that we can see what your current state is, also what twrp version

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Ver. 2.6.30
Thank you for helping me out with this. I truly appreciate it. Let me know what I have to do next

appears your
darkghostnit said:
View attachment 2626824
TWRP Ver. 2.6.30
Thank you for helping me out with this. I truly appreciate it. Let me know what I have to do next
Click to expand...
Click to collapse
I think flashing the ruu from this thread will help you out. Browse the thread first . It appears your bootloader is already locked. I don't think recovery matters.
http://forum.xda-developers.com/showthread.php?t=2496074

mb_guy said:
appears your
I think flashing the ruu from this thread will help you out. Browse the thread first . It appears your bootloader is already locked. I don't think recovery matters.
http://forum.xda-developers.com/showthread.php?t=2496074
Click to expand...
Click to collapse
As soon as I do that, I'll let you know my results. Last time i tried flashing a RUU using the .exe file I got a black screen with HTC logo and the program said failed. but I'll try this and let you know.

darkghostnit said:
Hey Guys,
I previously submitted another thread with my issue. I just really need some help on this. I was trying to flash another rom on phone but did not notice S-On until it was done. Going thru the custom rom install, I wiped everything even my recovery backups. All i can do now is boot into HBoot, Fastboot, or TWRP recovery. How can I get pass this problem? Is there a way I can get S-Off in fastboot mode only? Please I need access to my phone
Thanks
Click to expand...
Click to collapse
Since you have a custom recovery, extract boot.img from the zip, flash via fastboot : fastboot flash boot boot.img
run twrp, and install rom via sideload, like the previous guy said you don't need S-Off, with S-On you can't flash boot.img via twrp so it'll have to be done via bootloader

CYNiCAL2KX said:
Since you have a custom recovery, extract boot.img from the zip, flash via fastboot : fastboot flash boot boot.img
run twrp, and install rom via sideload, like the previous guy said you don't need S-Off, with S-On you can't flash boot.img via twrp so it'll have to be done via bootloader
Click to expand...
Click to collapse
I am a complete noob, so how can I sideload? I tried to push using adb push but that wasn't working for me and I'm sure I have all drivers installed. When I use ADB devices cmd in cmd prompt, nothing shows, but if I do fastboot devices, I do have something show. And if I were to have assistance conducting this method, can I flash any rom this way?

darkghostnit said:
I am a complete noob, so how can I sideload? I tried to push using adb push but that wasn't working for me and I'm sure I have all drivers installed. When I use ADB devices cmd in cmd prompt, nothing shows, but if I do fastboot devices, I do have something show. And if I were to have assistance conducting this method, can I flash any rom this way?
Click to expand...
Click to collapse
Unistall htc sync and htc drivers and install http://forum.xda-developers.com/showthread.php?t=2261088 these drivers, then use adb command 'adb devices' and hopefully it shows up, to sideload, it's a simple adb command. have the rom.zip in the adb folder. then use 'adb sideload rom.zip' then wait until 100% and it'll automatically run the script on twrp

You need to be in recovery to do adb devices.
You need to have the phone connected in Fastboot USB mode to do fastboot device.
These are NOT interchangeable.

SaHiLzZ said:
You need to be in recovery to do adb devices.
You need to have the phone connected in Fastboot USB mode to do fastboot device.
These are NOT interchangeable.
Click to expand...
Click to collapse
Okay I didn't know that. Thank you for that information. I will definitely keep that tidbit for the future. So i must be in recovery TWRP for Adb correct? not HBoot?

darkghostnit said:
Okay I didn't know that. Thank you for that information. I will definitely keep that tidbit for the future. So i must be in recovery TWRP for Adb correct? not HBoot?
Click to expand...
Click to collapse
Correct, either custom recovery like TWRP or CWM, or booted into OS with USB Debugging option enabled.

SaHiLzZ said:
Correct, either custom recovery like TWRP or CWM, or booted into OS with USB Debugging option enabled.
Click to expand...
Click to collapse
THANK YOU TO EVERYONE WHO POSTED TO THIS THREAD! You guys really helped me out today. i got the phone back to stock and all is well

[Q] From GPE To stock

Hey all,
Before 3 months ago I wanted to make the my HTC One to GPE.
I followed this guide:
http://htc-one.wonderhowto.com/how-...with-bootloader-recovery-ota-updates-0148068/
It worked great I really enjoyed this experience versions.
Now, I want to install Android Revolution HD 61.1 and I do not understand what the process I have to do.
I downloaded the file's version.
I enter to Recovery and installed from the file.
The device startup with a new version but there were some problems:
- Google's logo still appeared to me the operation of the device.
- It is unable to connect to Google's services.
- At the first time after the device turn on the sim card is not work but if I turn the flight mode on and then turn it off the sim work correctly.
*sorry about the incorrect English.

Make sure you do a full wipe from within the Aroma installer.
Sent from my HTC One using Tapatalk

I make full wipe before installing in installer and after installing in recovery.
What this Armoa instarller?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yotam.B said:
I make full wipe before installing in installer and after installing in recovery.
What this Armoa instarller?
Click to expand...
Click to collapse
Aroma installer is the interactive installer within the ROM's flashable file that guides you through the installation process. Put the ROM you want onto your SD card, boot to recovery, install the zip, and when the installer comes up be sure to tell it to perform a full wipe. As for the picture in your post, that's HBOOT.
Sent from my HTC One using xda app-developers app

Okay. Thank you. I understand you.
In Installation I make WIPE.
There is a need to WIPE after installation?
Anyway, I want to return the device to its original condition, with the HTC logo and then flash the version again.

Wipe before the installation. Wiping afterwards would just delete everything. If you're trying to just put Android Revolution on it, you don't have to go the entire way back to stock condition just to do it. Simply wipe and install. If you're S-OFF, you can update/change the firmware and all that, but it won't prevent the phone from functioning.
Sent from my HTC One using xda app-developers app

Yotam.B said:
Okay. Thank you. I understand you.
In Installation I make WIPE.
There is a need to WIPE after installation?
Anyway, I want to return the device to its original condition, with the HTC logo and then flash the version again.
Click to expand...
Click to collapse
flash latest 4.19.401.11 firmware from here: http://forum.xda-developers.com/showthread.php?t=2365506
that should update hboot etc, back to HTC Sense edition.

nkk71 said:
flash latest 4.19.401.11 firmware from here: http://forum.xda-developers.com/showthread.php?t=2365506
that should update hboot etc, back to HTC Sense edition.
Click to expand...
Click to collapse
This guide I will return the device to the original factory settings?

Yotam.B said:
This guide I will return the device to the original factory settings?
Click to expand...
Click to collapse
well this firmware: http://www.androidfilehost.com/?fid=23329332407579996 (from @vomer's guide) will get you back most (or hopefully all) HTC Sense firmware (except boot.img which comes part of the custom ROM, and recovery)
no need to relock bootloader since you're s-off, but remember:
fastboot oem rebootRUU
fastboot flash zip <name of firmware>.zip
fastboot flash zip <name of firmware>.zip <- yes TWICE !!
fastboot reboot-bootloader

nkk71 said:
well this firmware: http://www.androidfilehost.com/?fid=23329332407579996 (from @vomer's guide) will get you back most (or hopefully all) HTC Sense firmware (except boot.img which comes part of the custom ROM, and recovery)
no need to relock bootloader since you're s-off, but remember:
fastboot oem rebootRUU
fastboot flash zip <name of firmware>.zip
fastboot flash zip <name of firmware>.zip <- yes TWICE !!
fastboot reboot-bootloader
Click to expand...
Click to collapse
I'll try. Thank you very much for the help!
I will update with the results.

Okay. First of all, thanks for the help!
I did what you said and it really solved the second of three problems I wrote.
But the only problem with the Google logo, it still did not solve me:

[Q] How to return it to the original Rom and Lock

Hello to all
i have buy from the ebay an HTC ONE m7. it was Tampered and unlocked with cyanogenmod 11 and root ofcourse.
So my question is how can i rebuild it to the original phone it was with the original ROM and Lock ?
i have try some ways from threads i have read but with out success.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks a lot.

elessargr said:
Hello to all
i have buy from the ebay an HTC ONE m7. it was Tampered and unlocked with cyanogenmod 11 and root ofcourse.
So my question is how can i rebuild it to the original phone it was with the original ROM and Lock ?
i have try some ways from threads i have read but with out success.
Thanks a lot.
Click to expand...
Click to collapse
You would need to:
Download this file Guru Reset 4.19.401.11 and place on your sdcard
Boot into bootloader/FASTBOOT USB
Flash TWRP 2.6.3.3
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Boot into Recovery and install Guru Reset
This will take you back to stock and you will get the chance at the end to decide if you want to remain stock or root.

majmoz said:
You would need to:
Download this file Guru Reset 4.19.401.11 and place on your sdcard
Boot into bootloader/FASTBOOT USB
Flash TWRP 2.6.3.3
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Boot into Recovery and install Guru Reset
This will take you back to stock and you will get the chance at the end to decide if you want to remain stock or root.
Click to expand...
Click to collapse
Thanks for the fast response
i manage to put the new ROM on the phone; its a little modified but its ok. i need instructions also for how to remove the tampered message and the unlocked message. any idea?

elessargr said:
Thanks for the fast response
i manage to put the new ROM on the phone; its a little modified but its ok. i need instructions also for how to remove the tampered message and the unlocked message. any idea?
Click to expand...
Click to collapse
Achieve S-OFF with firewater or sunshine
Download and install this Bootloader Reset Tool

majmoz said:
Achieve S-OFF with firewater or sunshine
Download and install this Bootloader Reset Tool
Click to expand...
Click to collapse
am also trying to update the ROM with the new updates from htc and it cant. it auto enter on the recovery menu of twrp.
can from the S-OFF going back to S-ON somehow if i do it?

elessargr said:
am also trying to update the ROM with the new updates from htc and it cant. it auto enter on the recovery menu of twrp.
can from the S-OFF going back to S-ON somehow if i do it?
Click to expand...
Click to collapse
To receive updates you need stock rom and stock recovery. Here is nkk71's post on OTA Updates.
Also, it might be better to achieve S-OFF before the updates. It is sometimes a lot easier with the lower version numbers.

elessargr said:
am also trying to update the ROM with the new updates from htc and it cant. it auto enter on the recovery menu of twrp.
can from the S-OFF going back to S-ON somehow if i do it?
Click to expand...
Click to collapse
If thats the case you did not install the Guru Reset correctly
re-flash the guru reset and choose yes to stock recovery and radio and No to Root. When done correctly you won't have TWRP and the updates will work
I do agree though ...Get s-off before updating

Keeping your Butterfly S Up to Date.!!!

Point of this guide is to have users have a simple knowledge on how to keep there HTC Butterfly S 901s/901e up to date with the development community.! I will try to make this as Noob-friendly as I can. And if it's still too hard to understand then their is a simple solution. STOP MESSING WITH YOUR PHONE.!!!!!
1. ADB & Fastboot Folder
Will Update Soon.!!
2. Unlocking Your Boot loader
Description : The reason why most users and devs unlock their boot loader is so users or devs can start modifying there phone by flashing zips, kernels and recoveries.
A. Go to htcdev.com
B. Follow their unlocking guide ( if you can't do this then stop what your doing and stay pure stock )
3. Flashing A Recovery
Description : A Recovery is the must needed thing when it comes to flashing kernels and zips of all sorts. But just because you have a recovery installed doesn't mean you can flash anything on XDA , flash what is only on your development forums. Or what has support for your phone.
A. Download recovery Here
B. Place the recovery you just downloaded into your fastboot folder
C. In cmd prompt type the following
Code:
fastboot flash recovery recovery.img
4. Obtaining S-Off
Description : For a general understanding what s-off is pleased read Here.!!
A. Methods of Achieving S-Off as of 02/13/2015
SunShine Apk - Here
RumRunner - Here
Follow their instructions as I will not post them here.!!!!
After Achieving S-Off proceed to the next step
5. Obtaining SuperCID
A. Boot phone into boot loader
B. Navigate to your Fastboot folder
C. Enter these commands
Code:
fastboot oem readcid
fastboot oem writecid 11111111
fastboot reboot bootloader
5. Firmware Update
A. Download the latest firmware zip from Here.!!
B. With the download firmware.zip you want to put it in your fastboot folder
C. Power Off Phone
D. Hold volume down + Power
E. Plug phone into computer. The Phone should enter Fastboot USB
F. Navigate your command prompt to your fastboot folder
G. Next enter the following commands:
Code:
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot flash zip firmware.zip (same command if first time fails)
Fastboot reboot
H. Now your phone should reboot
CONGRATULATIONS!!! You are up to date and ready to flash anything in our Butterfly S Community.!
6. Flashing Roms
How to install any Rom ( The Correct Way ) :
1: Boot to Recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you don't have a Advanced Power Menu. Follow this.!!!
A.Power Off Phone
B. Hold volume down + Power
C. Choose Recovery
2: Wipe > Advanced Wipe > ( check system, data, cache, dalvik )
Then Standard Wipe.
3: Install > ( navigate to your zip and flash )
4: Wipe in Aroma If it's available
Ex.
5: Boot to bootloader after flashing and flash boot.img found within the Rom you just flashed.
6: Reboot and Profit.!!!!

Mine

Thanks it's a very detail tutorial for the newbies!

dioooi said:
Thanks it's a very detail tutorial for the newbies!
Click to expand...
Click to collapse
Needs a bit more explaining I think.

I don't know why, but at first, fastboot didn't work for me.
I tried many things found on the internet, many guides, many drivers but every time, while my device was on, my computer could detect it and interact with it using cmd and "adb" commands, but every time I rebooted to bootloader, and selected "fastboot", nothing worked. The drivers wouldn't install correctly and even "fastboot devices" wouldn't work. My phone was on Hboot 1.54, and my computer was on a Windows 8.1 x64
I then installed Windows 7 on my laptop and had no problems installing the drivers and flashing the firmware.zip using fastboot.
Today I wanted to try again to make fastboot work with my butterfly (hboot 1.57 now) on my windows 8.1 PC, and...it worked ! I'm no expert, but I guess Hboot 1.54 wasn't "compatible" with win 8.1, whereas hboot 1.57 has no problems.
Just wanted to share this here, in case it can help someone else in the same situation.

firmware update
Hi, can i know which file do i download to upgrade the firmware of my HTC butterfly s international version? cause i downloaded the 40mb version and it says that wrong ID while the MD5 version is somehow corrupted...

mariokong said:
Hi, can i know which file do i download to upgrade the firmware of my HTC butterfly s international version? cause i downloaded the 40mb version and it says that wrong ID while the MD5 version is somehow corrupted...
Click to expand...
Click to collapse
Download using Firefox, and make sure you have superCID

xXminiWHOOPERxX said:
Download using Firefox, and make sure you have superCID
Click to expand...
Click to collapse
ah thanks for the quick reply got it

mariokong said:
Hi, can i know which file do i download to upgrade the firmware of my HTC butterfly s international version? cause i downloaded the 40mb version and it says that wrong ID while the MD5 version is somehow corrupted...
Click to expand...
Click to collapse
The MD5 file is just a checksum which lets you verify that the download went without a problem.

xXminiWHOOPERxX said:
Needs a bit more explaining I think.
Click to expand...
Click to collapse
Hi , i am on the S-Off procedure and i keep getting the error "looks like your device is not rooted And lacks an unsecure kernal. su or Fu" Please help me out here ?

iambatman007 said:
Hi , whenever i try to supercid it it shows me an error saying exfat sd card.....no partition etc etc..... can you please help? my device is the 901e version. And in the latest firmware that i have to download i just download the 42mb file named"firmware.zip" , correct?
P.s the error looked something like INFO[JAVACARD_ERR] this
Click to expand...
Click to collapse
Windows 8 I presume? Try using Linux

xXminiWHOOPERxX said:
Windows 8 I presume? Try using Linux[/QUOTE
And
i am on the S-Off procedure and i keep getting the error "looks like your device is not rooted And lacks an unsecure kernal. su or Fu" Please help me out here ? I am rooted and have installed busybox, super su.
Click to expand...
Click to collapse

This work on butterfly 2?