Hello for all!
Have a good time in my thread!This is an instruction (or method) about how to get a rooted, deodexed, recovery, superusermod firmware (build number 199) for SXTX (UB)Attention!
Use this method only for Unlocked Bootloaders!!!
This "Method" i've been tested on my SXTX, and its working, please dont try it on SXTX "LB" or on Sony Xperia T.
I'm not responsible of sploit devices etc. Everything what you do, you doing only on your own risk!!!
Follow the instruction carefully and everything gonna be allright
Big thanks and all respect for those who make it possible:
DooMLoRD - stock SXTX kernel with dual recovery
vlad-96 (4pda.ru) - for deodexer
DavidMKD - superusermod guide
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2458144Some screens
Im installed another systemUI/Home and themes... they are not included into this method!!! Look for, deodex, root, superusermod...they are
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Unlocked Bootloader
Installed Flashtool
Installed fastboot drivers
Installation process (UB):
Copy first
The firmware to Flashtool/firmwares folder.
The kernel.elf (dualrecovery) to Flashtool/firmwares folder (or somewhere else where you easily find)
The SuperSU to your device's sdcard
The deodexer zip to your device's sdcard
Getting stock official 199 firmware + root + dualrecovery
Power off your device. Start Flastool on your PC, flash device-> flashmode, select the "firmware" and press Flash. When the guide window pop-ups on your powered off device hold Vol- (down) and connect to PC (green led will appear). Wait until it finished. Disconnect. Don't power on your device!!!
On your powered off device hold Vol+ (up) and connect to PC (blue led will appear), then start Flashtool, flash device-> fastboot mode, select the "select kernel" (DooML0RD) and press Flash. Wait until it done. Close, disconnect. Now you have a kernel with dual recovery!!!
Turn on your device, when the violet led will appear press Vol+(up) (CWM). Go to install.zip, sdcard0 and flash UPDATE-SuperSU-v1.93.zip, reboot. Now you rooted!!!
Deodexing (includes patched services.jar aka "Superusermod")
Enter CWM, then to advanced menu and wipe dalvik cache.
Go to Install.zip and choose the "SXTX_199_Deodexer+superusermod".
Flash it.
Go to advanced menu and wipe dalvik cache!
Reboot and Enjoy!
Downloads:
Firmware: [email protected]
Kernel: SXTX_199_dualrec_kernel.rar or use link from androidfilsharing.com
SuperSU: UPDATE-SuperSU-v1.93.zip or use link from androidfilesharing.com
Deodexer: SXTX_199_Deodexer+superusermod
Additional downloads:
Deodexer (without patched services.jar aka "Superusermod"): i will upload soon
Modded services.jar for SXTX 199 users: Services_superusermod_SXTX_build_199
Some information:
Enter to recovery:
Vol up (+) - CWM
Vol down (-) - TWRP
This deodexer file is not a whole, full deodexed 199 firmware. It is just a deodexer.zip for 199 firmware which deodexing the system/app and system/framework folders, so dont try to flash it if you are not on firmware 199, otherwise you will get bootloop.
Warning!!!If you install Hexared, Robocop (maybe others too), then applying it will work only until you reboot the phone... if you reboot you will get bootloop! - im searching the solution to solve it!
But for example the UniQue theme (which also require superusermod) working perfectly even after reboot with no problems.
XDA:DevDB Information
[STOCK][JB 4.3][9.2.A.1.199][UB]SXTX Root + CWM+ Deodex+Superusermod [14.03], a ROM for the Sony Xperia T
Contributors
Midleo
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2014-03-14
Created 2014-03-14
Last Updated 2014-03-14
thanks, this CWM kernel is touch version or normal ?
There is two recoveries, CWM, TWRP. The CWM one is simple vol+, vol-, power button and you can use swipes (i never used). The TWRP is full touch!
Sent from my LT29i using XDA Premium 4 mobile app
Midleo said:
There is two recoveries, CWM, TWRP. The CWM one is simple vol+, vol-, power button and you can use swipes (i never used). The TWRP is full touch!
Sent from my LT29i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you mean CWM with touch function ? can swipe up down left right ? not PhilZ Touch CWM right ? i like PhilZ Touch CWM than TWRP is full touch and CWM with touch
Dumb Question
If you don't mind me asking, what's the difference between SuperSU and modded services jar?
Is one for root and the other one for apk install permissions? Is that it or do they do the same thing?
devilmaycry2020 said:
you mean CWM with touch function ? can swipe up down left right ? not PhilZ Touch CWM right ? i like PhilZ Touch CWM than TWRP is full touch and CWM with touch
Click to expand...
Click to collapse
Yes simple CWM 6.0.4.5 with touch function... but its your decission...you can navigate with both (touch, buttons). It is not PhilZ touch recovery!!!
Vol+ will enter you to CWM
Vol- to TWRP (full touch)
kaleys said:
If you don't mind me asking, what's the difference between SuperSU and modded services jar?
Is one for root and the other one for apk install permissions? Is that it or do they do the same thing?
Click to expand...
Click to collapse
Im not sure for 100%, but i know that SuperSU is just giving you possibility to action with system (delete, copy, replace, cut, rename, changing permissions of system files etc.)...so its getting you full enter to system folder and others... but SuperSU dont changing the interior of apks, jar etc. on it own... it just giving you the permission for it... for ex. if you have SuperSU you can edit build.prop...
Superusermod is "disables the nasty signature verification for all apps. After applying this mod you can install apps with different signature like Xperia Z1 or newer Sony apps" -> read first strokes
Midleo said:
Yes simple CWM 6.0.4.5 with touch function... but its your decission...you can navigate with both (touch, buttons). It is not PhilZ touch recovery!!!
Vol+ will enter you to CWM
Vol- to TWRP (full touch)
Click to expand...
Click to collapse
thanks. can you make kernel with PhilZ touch recovery only ?
Midleo said:
Im not sure for 100%, but i know that SuperSU is just giving you possibility to action with system (delete, copy, replace, cut, rename, changing permissions of system files etc.)
Click to expand...
Click to collapse
Ohh alright thanks for that, was informative. Gonna upgrade with your method soon.
Thanks Again!
devilmaycry2020 said:
thanks. can you make kernel with PhilZ touch recovery only ?
Click to expand...
Click to collapse
You can do it on your own!
If im right you can do like this!
Flashing firmware, kernel and SuperSU from my method! Then start flashtool and flash the firmware again but on "exlcude menu point" check all except kernel!!!! This will receive you a stock 199 firmware with root but without recovery, cause you flashed back the stock 199 kernel from firmware....
Now when you have root you can use this instruction to get PhilZ touck kernel: http://forum.xda-developers.com/showthread.php?t=2657190
:good: :laugh:
Midleo said:
You can do it on your own!
If im right you can do like this!
Flashing firmware, kernel and SuperSU from my method! Then start flashtool and flash the firmware again but on "exlcude menu point" check all except kernel!!!! This will receive you a stock 199 firmware with root but without recovery, cause you flashed back the stock 199 kernel from firmware....
Now when you have root you can use this instruction to get PhilZ touck kernel: http://forum.xda-developers.com/showthread.php?t=2657190
:good: :laugh:
Click to expand...
Click to collapse
thanks for the info, but do i need UL first ? i think in your guide no need UL, is it right ?
devilmaycry2020 said:
thanks for the info, but do i need UL first ? i think in your guide no need UL, is it right ?
Click to expand...
Click to collapse
Iin case PhilZ Unlocked bootloader is not necessary! It possible on LB!
Midleo said:
Iin case PhilZ Unlocked bootloader is not necessary! It possible on LB!
Click to expand...
Click to collapse
yeah, i knew PhilZ CWM can do on LB. but in the step flash CWM kernel built-in i must unlock BL first ?
devilmaycry2020 said:
yeah, i knew PhilZ CWM can do on LB. but in the step flash CWM kernel built-in i must unlock BL first ?
Click to expand...
Click to collapse
ahhh.....yeah...you right!!! :good: Yes you need! so dont try it on LB, otherwise youll get problem
Midleo said:
ahhh.....yeah...you right!!! :good: Yes you need! so dont try it on LB, otherwise youll get problem
Click to expand...
Click to collapse
here is my step to make 4.3 root, cwm
1. backup TA then unlock UL in 4.1.2
2. flash stock 199 (do not reboot)
3. flash CWM kernel (do not reboot)
4. flash supersu (do not reboot)
5. flash stock kernel (do not reboot) , you lost CWM
6. flash philZ CWM touch
7. relock BL
8. done.
Right ?
devilmaycry2020 said:
here is my step to make 4.3 root, cwm
1. backup TA then unlock UL in 4.1.2
2. flash stock 199 (do not reboot)
3. flash CWM kernel (do not reboot)
4. flash supersu (do not reboot)
5. flash stock kernel (do not reboot) , you lost CWM
6. flash philZ CWM touch
7. relock BL
8. done.
Right ?
Click to expand...
Click to collapse
You right till step 5!
On step 5 after you flashing stock kernel it doesnt matter you reboot or not...you lost recovery!!! no more recovery...
6. You need to boot up (set up) your phone! then install flashgordon app, then on flashgordon app select PhilZ.zip and flah it
7. About step 7 i nver tried it....so im not sure 100% but i think it should work!!!
devilmaycry2020 said:
here is my step to make 4.3 root, cwm
1. backup TA then unlock UL in 4.1.2
2. flash stock 199 (do not reboot)
3. flash CWM kernel (do not reboot)
4. flash supersu (do not reboot)
5. flash stock kernel (do not reboot) , you lost CWM
6. flash philZ CWM touch
7. relock BL
8. done.
Right ?
Click to expand...
Click to collapse
I don't know why you keep it so complicated. Myself and others have already posted plenty of times this exact scenario.
In your case, you're almost right, except you need to flash Philz recovery and then flash stock kernel. If you do it this way, you don't need to install Flashgordon. I'll put it simple:
1. backup TA then unlock BL in 4.1.2
2. flash stock 199 / ZIP or FTF
3. flash CWM kernel / ZIP or Sin/Elf Kernel
4. Reboot into recovery, and flash Philz Recovery
5. Go into fastboot, flash stock kernel, you have not lost recovery
6. Boot into recovery, flash SuperSu (if you want).
7. done.
Midleo said:
7. About step 7 i nver tried it....so im not sure 100% but i think it should work!!!
Click to expand...
Click to collapse
About this, I don't know either, I haven't tried relocking BL on 4.3 with root and recovery, but I don't see why it wouldn't work either.
Antiga Prime said:
I don't know why you keep it so complicated. Myself and others have already posted plenty of times this exact scenario.
In your case, you're almost right, except you need to flash Philz recovery and then flash stock kernel. If you do it this way, you don't need to install Flashgordon. I'll put it simple:
1. backup TA then unlock BL in 4.1.2
2. flash stock 199 / ZIP or FTF
3. flash CWM kernel / ZIP or Sin/Elf Kernel
4. Reboot into recovery, and flash Philz Recovery
5. Go into fastboot, flash stock kernel, you have not lost recovery
6. Boot into recovery, flash SuperSu (if you want).
7. done.
About this, I don't know either, I haven't tried relocking BL on 4.3 with root and recovery, but I don't see why it wouldn't work either.
Click to expand...
Click to collapse
Many thanks. Good job,
in step 4 ; i flash deodexed rom first then philz touch, because after step 6 if i want to deodex rom , i flash rom zip then root gone.
I did it, locked BL + rooted + PhilZ touch, TA restored OK
devilmaycry2020 said:
Many thanks. Good job,
in step 4 ; i flash deodexed rom first then philz touch, because after step 6 if i want to deodex rom , i flash rom zip then root gone.
I did it, locked BL + rooted + PhilZ touch, TA restored OK
Click to expand...
Click to collapse
Great. If you had planned to flash a ROM zip, you could have done that straight from 4.1.2 recovery and not flash 4.3 FTF, but whatever, as long as it works for you.
Antiga Prime said:
Great. If you had planned to flash a ROM zip, you could have done that straight from 4.1.2 recovery and not flash 4.3 FTF, but whatever, as long as it works for you.
Click to expand...
Click to collapse
Big problem mate. i've got auto reboot while copy or delete file in system. please help. cause i lock BL to gain BE working.
Related
[Stock Rom][LB/UB] Xperia ZR 4.3 10.4.B.0.101 INDIAN Pre-Rooted Flashable Zip & Dual Recovery [Indian Variant]
Before we begin, you must agree that I'll be not held responsible if anything goes wrong or your phone gets bricked or lightning strikes it while following this guide. You try this guide at your own risk. This guide has been personally built and tested by me on my own Xperia ZR phone and works great without any issues. Make sure you read the instructions very carefully before you start.
Hello everyone, this is a pre-rooted flashable zip containing stock 4.3 rom of build number 10.4.B.0.101 built for Xperia ZR phone user's in INDIA.
This rom is rooted. Has no bugs except Sony's official 4.3 bugs. This rom is not modified in any way and nothing has been added or deleted. This is a pure stock rom with the additional privilege of Root access & Dual Recovery.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instruction:
1)If you're not rooted on 4.3 build10.4.B.0.569 then downgrade to stock 4.1.2 and root it using Doomlord's Easy RootingToolkit and also install recovery.
2)Download the 4 files at the link below and when finished join the splitted files using the hjsplit software provided in the download link then copy C5502_4.3_Stock_INDIAN_Pre-Rooted.zip files to your SD Card.
3)Boot into recovery and wipe data, wipe cache, wipe dalvik and choose option "Clean to install a new rom" in the recovery. Then flash the C5502_4.3_Stock_INDIAN_Pre-Rooted.zip and the Super SU v1.93 flashable zip.
4)Power Off Phone. Do not reboot/Do not turn on the phone.
5)Flash C5502_10.4.B.0.101_Generic_INDIA.ftf file using FlashTool with "Exclude- System" marked in the checkbox before flashing it.
(Do not forget to mark the exclude "System" before flashing via FlashTool otherwise it will overwrite the zip files we just flashed above)
6)Turn on the phone and Enjoy the INDIAN variant for our Xperia ZR phone.
Download Links via Secure Storage Box
1) C5502_4.3_Stock_INDIAN_Pre-Rooted&Dual Recovery.zip
2) C5502_10.4.B.0.101_Generic_INDIA.ftf
3) Super SU User Update v1.93 Flashable zip
4) hjsplit software - to join the split files.
Download Mirror via MEGA File Storage
C5502_4.3_Stock_INDIAN_Pre-Rooted.zip
C5502_10.4.B.0.569_Generic_IN.ftf
Note for Downloading Files:
When downloading from Box Secure Storage, use the Download button on the top left side of the page. It will download the entire folder in a compressed zipped file. When finished downloading, extract the zip file and use the hjsplit software to join the .001 extension files into a single flashable zip file.
If downloading from MEGA use a chrome or firefox browser. Hit the red coloured "Download to your Computer" button. Starting the download progress takes a minute or two. When the download is finished, you'll find the zip file in the default "Downloads" folder in windows. Sometimes, the file might have a ".partial" extension even when the download is completed 100%. Just change the .partial extension to ".zip" and you're good to go.
Let me know if any other problems come up.
Please Note:
# If anything goes wrong in the above steps, then flash your own .ftf file using flashtool to boot into a fresh stock rom and restart the procedure again.
# Your data will be lost. So back it up. (I recommend a fresh start from scratch)
# Do not update busybox at any cost otherwise you'll loose root and recovery privileges.
Credits
# NUT for the guide.
And all other developers on xda.
Enjoy Your Rooted Stock 4.3 INDIAN Rom...
Have Fun.
Regards,
Ralf Waldo Emerson.
XDA:DevDB Information
[Stock Rom][LB/UB] Xperia ZR 4.3 10.4.B.0.101 INDIAN Pre-Rooted Flashable Zip & Dual Recovery [Indian Variant] , a ROM for the Sony Xperia ZR
Contributors
ralf_waldo
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LB/UB. Stock Rom. Rooted with recovery installed.
Based On: Stock Rom
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2014-02-21
Created 2014-02-20
Last Updated 2014-04-02
I'm assuming I can flash the russion stock ftf file instead while using your pre-root zip? Do I need to flash the su fix?
grim_ripper said:
I'm assuming I can flash the russion stock ftf file instead while using your pre-root zip? Do I need to flash the su fix?
Click to expand...
Click to collapse
Yes, you can flash any ftf but make sure you exclude system. Also, NO super user fix required. Although updating the super su user to its latest version from playstore is recommended.
Have fun.
Regards,
-Ralf
ralf_waldo said:
Yes, you can flash any ftf but make sure you exclude system. Also, NO super user fix required. Although updating the super su user to its latest version from playstore is recommended.
Have fun.
Regards,
-Ralf
Click to expand...
Click to collapse
Sir,
Follow all your procedure, however super su is not working in my ZR. Please see attachment.
Edit - i just re-root it back in recovery and it fixed.
grizzlyspid86 said:
Sir,
Follow all your procedure, however super su is not working in my ZR. Please see attachment.
Edit - i just re-root it back in recovery and it fixed.
Click to expand...
Click to collapse
Good to know, but for information, did you wipe data, wipe cache, wipe dalvik and choose option "Clean to install a new rom" in the recovery before flashing rom?. Also, did you flash any other zip after flashing the rom?. Did you update busybox?.
I'm using the same rom without any super su user issues.
-Ralf
Ahh damn. Forget to wipe those before flashing. Still work though. Hahaha is there any effects?
Sent from my C5502 using xda app-developers app
---------- Post added at 05:47 PM ---------- Previous post was at 05:44 PM ----------
Thanks for the rooted rom btw. Now i can use greenify for battery saving, transfer big game to external sd card. really a must app for a smartphone.
Sent from my C5502 using xda app-developers app
grizzlyspid86 said:
Ahh damn. Forget to wipe those before flashing. Still work though. Hahaha is there any effects?
Sent from my C5502 using xda app-developers app
---------- Post added at 05:47 PM ---------- Previous post was at 05:44 PM ----------
Thanks for the rooted rom btw. Now i can use greenify for battery saving, transfer big game to external sd card. really a must app for a smartphone.
Sent from my C5502 using xda app-developers app
Click to expand...
Click to collapse
No effects, since the super su user app is fixed. Have fun.
-Ralf
thank you dear ralf waldo , i have a request
please strip the ftf file (exclude the system.sin from the ftf (unzip/extract ftf and repack again)
some ppl like me have some limitation on data bandwidth and data traffic
tnx in advance bro
This is really heavy work and thanks for your efforts.
I am improving my knowledge slowly from the last thread onwards
1. Shall I take it the advice NOT to update BusyBox stands cancelled for this? It is not specifically mentioned unlike your previous thread hence the doubt.
2. What if Sony decides to roll-out some software update for a component such as Album? Will I be able to download and install that as usual? And about future official ROM updates by Sony say to KitKat. Will it be upgradable (even if I lose root) in place or will I have to reset the phone? I am thinking that individual software updates should work but whole system upgrade may cause problems.
sling-shot said:
This is really heavy work and thanks for your efforts.
I am improving my knowledge slowly from the last thread onwards
1. Shall I take it the advice NOT to update BusyBox stands cancelled for this? It is not specifically mentioned unlike your previous thread hence the doubt.
2. What if Sony decides to roll-out some software update for a component such as Album? Will I be able to download and install that as usual? And about future official ROM updates by Sony say to KitKat. Will it be upgradable (even if I lose root) in place or will I have to reset the phone? I am thinking that individual software updates should work but whole system upgrade may cause problems.
Click to expand...
Click to collapse
Oh yeah, I forgot to mention about busybox. Thanks for reminding.
Don't worry, you'll get all updates from sony. As I said, this rom is pure stock rom with the additional benefit of root access and recovery.
Don't know about future upgrades from sony as of yet. But yes, you'll loose root access but you can always look up on xda for my thread to root it back again.
Cheers,
Ralf
awesome....
working as described by OP... full root and recovery... thx buddy.
Hallo
i need a unlocked bootloader for it?
or i can make it for my c5502 with locked bootloader?
regards mira
mirakulixs said:
Hallo
i need a unlocked bootloader for it?
or i can make it for my c5502 with locked bootloader?
regards mira
Click to expand...
Click to collapse
No need to unlock bootloader.
mirakulixs said:
Hallo
i need a unlocked bootloader for it?
or i can make it for my c5502 with locked bootloader?
regards mira
Click to expand...
Click to collapse
No need to unlock bootloader. This flashable zip is specially made for Xperia ZR phone users with locked bootloader.
So have fun!!
Regards,
Ralf Emerson.
Thanks.
i make it, and its realy good!
root on fw 101 with locked bootloader!http://forum.xda-developers.com/images/icons/icon14.gif
dear ralf_waldo u make a famous and great job for my c5502!!!!
i installed cwm from http://forum.xda-developers.com/showthread.php?t=2471981
or u can recommend another one?
regards mira
mirakulixs said:
Thanks.
i make it, and its realy good!
root on fw 101 with locked bootloader!http://forum.xda-developers.com/images/icons/icon14.gif
dear ralf_waldo u make a famous and great job for my c5502!!!!
i installed cwm from http://forum.xda-developers.com/showthread.php?t=2471981
or u can recommend another one?
regards mira
Click to expand...
Click to collapse
Wait, did you install that cwm recovery after flashing my zip?. Please don't do that. You'll get bootloops. I've already included the recovery in the flashable zip file. Just follow the instructions carefully.
Let me know if you run into any problems.
Regards,
Ralf.
no..
i installed recovery and root on my stock 4.2.2, after that i installed your indian pre-rooted zip,then supersu update......
but i cant turn my phone off!!!!!!!!! in cwm is no button to turn off, only reboot etc. so i put my accu away.
then i put it on, but dont turn on my phone.
start flashtool > select your ftf > press volume down and put it on pc > flash with flashtool your stock indian ftf with "execute system"
and then i was unsecure cause the reboot take longer as 10 minutes!
and now...im realy happy!
i must install cwm on 4.2.2 before to install your zip..or?
regards mira
mirakulixs said:
no..
i installed recovery and root on my stock 4.2.2, after that i installed your indian pre-rooted zip, when its finished i flash with flashtool your stock indian ftf
and then i was unsecure cause the reboot take longer as 10 minutes!
and now...im realy happy!
regards mira
Click to expand...
Click to collapse
By reboot take longer, you mean the first boot after flashing a new rom?. It roughly takes 4 to 6 minutes. 10 minutes seems pretty long. Never happened to any of us. Anyways, I'm glad you made it work. But, if it really took 10 minutes then I suggest you do a factory reset without your sim card and memory card inserted in the phone. Also, choose erase internal storage option at the bottom in the factory reset menu. This will rule out any issues or problems.
Cheers.
mirakulixs said:
no..
i installed recovery and root on my stock 4.2.2, after that i installed your indian pre-rooted zip,then supersu update......
but i cant turn my phone off!!!!!!!!! in cwm is no button to turn off, only reboot etc. so i put my accu away.
then i put it on, but dont turn on my phone.
start flashtool > select your ftf > press volume down and put it on pc > flash with flashtool your stock indian ftf with "execute system"
and then i was unsecure cause the reboot take longer as 10 minutes!
and now...im realy happy!
i must install cwm on 4.2.2 before to install your zip..or?
regards mira
Click to expand...
Click to collapse
Always install the newest recovery available for Xperia ZR at this thread - http://forum.xda-developers.com/showthread.php?t=2261606
The recovery which you installed was very old and it doesn't have power off option.
Cheers,
Ralf.
this recovery http://forum.xda-developers.com/showthread.php?t=2261606
is in your rom i think?
on externel sd i have 3 unknown things.....
1 folder XZDualRecovery
1 customized-capability.xml
1 default-capability.xml
i can delete it?
shall i flash now newer recoverys when its avialible?
when recoverys are newer, i can restore older backups with i make with that recovery which is in your rom now?
redards mira
Known CWM recovery, greatly improved with touch ui and many useful features by Phil3759.
Original Xperia T thread
Compatible with Rom Manager (reboot recovery, backup, install,...)
As the title says, this recovery has some needed modifications included, so you can use it with unmodified stock kernel (locked bootloader).
Main LB script with logging was created by cray_Doze.
My modifications are firstly based on recovery from davidmarco, then I found big help and better (PhilZ) recovery in [NUT]´s thread and that it´s better to unmount selinux fs so it cannot be redefined and checking files is probably stopped (?) in recovery, so I´ve had to use init binary that does not need selinux.
Installation:
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu
Upgrading from 4.1 with CWM for LB to stock 4.3:
1. Download stock 4.3 rom zip to SDcard
2. Download this recovery to SDcard
3. Reboot to 4.1 CWM and flash 4.3 rom
4. Flash this recovery (optionally flash SU too)
5. Power off the device
6. Flash 4.3 ftf - tick all wipes, and exclude system from installation or you will do it all again from scratch
Or if you already have some recovery on 4.3, just flash this in recovery.
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Changelog:
v1.7
- proximity sensor fix (with big help of steveboss and his V)
- reboot recovery working from all applications (quick settings, rom manager, recovery, etc.)(tested on T)
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.7.zip
Screenshots
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Good work, peetr_
Sent from Xperia V: uniQue 2.1.3 - touch of perfection
Awesome work bro
Sent from my LT30p using Tapatalk
peetr_ said:
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.3.zip
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Click to expand...
Click to collapse
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Oohhlala said:
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Click to expand...
Click to collapse
You can use backup and restore, this is a working version, just don't flash an update.zip made with the recovery (there is an option for creating that). For SuperSU CWM flashable zip look at the download section of the original SuperSU topic
Screenshots fyp
norti said:
Screenshots fyp
Click to expand...
Click to collapse
Thanks, I will add your post to OP.
Great work bro!
peetr_ said:
Thanks, I will add your post to OP.
Click to expand...
Click to collapse
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Oohhlala said:
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Click to expand...
Click to collapse
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
peetr_ said:
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
Click to expand...
Click to collapse
i've got bootloop , stuck in sony logo
Data wiped in flashtool? You can't even get to recovery? Blue led is shining??
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
Had this the other day trying to upgrade. If you can't get into CM, Use sony pc companion to bring it back - repair option
tested on TX 4.3 official stock system
and confirmed it works
both externel and internal storage can be used to flash
:highfive::highfive:
I found one bug (your mac address and other things are not restored after factory reset). I have it already fixed. I will upload fixed version today or tomorrow. There should be no need to do factory reset again, after installation of the fix.
First post updated with fixed import from TA after factory reset - 1.4 version.
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Oh, that looks like the reason. Sorry. I will edit the OP.
daniel090588 said:
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Click to expand...
Click to collapse
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Oohhlala said:
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Click to expand...
Click to collapse
Flash back a 4.1.2 rom with Flashtool, root it, put a cwm on it and continue with 'Upgrading from 4.1 with CWM for LB to stock 4.3' section of the first post You can find everything in the All in One post in the Q&A section of this forum.
hi all
someone chinese guy translate to english please.
http://www.mobile01.com/topicdetail.php?f=569&t=3774860&last=49078241
hi, @devilmaycry2020
this is the link for deodexed rom from OP given by you
https://mega.co.nz/#F!zxRyWYTQ!qgWw2anKKj9ZpLc_ItFIVA
thanks =D
izukamikain said:
hi, @devilmaycry2020
this is the link for deodexed rom from OP given by you
https://mega.co.nz/#F!zxRyWYTQ!qgWw2anKKj9ZpLc_ItFIVA
thanks =D
Click to expand...
Click to collapse
i've got it but got bootloop at sony logo. please translate the tutorial step by step how to flash it. can't read chinese language .thanks
Base on your link , for TX -
1) flash ROM in recovery - DO NOT reboot
2) flash lockeddualrecovery2.7.XX-BETA - DO NOT reboot
3) flash UPDATE-SuperSU-v1.9X.zip - DO NOT reboot
4) turn off phone (by taking out battery)
5) flash kernelonly.ftf with flashtool
then you're done
---------- Post added at 09:46 AM ---------- Previous post was at 09:30 AM ----------
For the rest , SP & V -
SP
You'll only need to
1) flash rom - DO NOT reboot
2) flash UPDATE-SuperSU-v1.9X
3) switch off phone (by taking out battery)
4) flash kernelonly.ftf using flashtool in flashmode
V
SP
You'll only need to
1) flash rom
2) switch off phone (by taking out battery)
3) flash kernelonly.ftf using flashtool in flashmode
Prerequisites for all device ( T / TX / V /SP ) -
1) rooted JB 4.1 fw with recovery installed
recommended recovery as follow :
T: lockeddualrecovery2.7.XX-BETA
TX: lockeddualrecovery2.7.XX-BETA
V: CWM6-cDM_v2.5_vfix2
SP: CWM_SP_LB_43
all of which can be found in the specific device thread in XDA
Works Perfectly!:good:
Dowload
1.TX LT29i 4.3 199 deodex USA ROMflash01S.zip
2.LT29i_9.2.A.1.199_USA kernelonly.ftf
From This Link >> https://mega.co.nz/#F!zxRyWYTQ!qgWw2anKKj9ZpLc_ItFIVA
3.XT-lockeddualrecovery2.7.94-BETA.flashable.zip (6.83MB)
From This Link >> http://nut.xperia-files.com/
4.UPDATE-SuperSU-v1.9X.zip
(I cant see the link in Chinese web but I already have the File If you want Download from my attachment)
****Then see the method that @crexzz Translate for us and follow those step****
add more link for better download speed :https://drive.google.com/file/d/0B7eKk4lF9rkONnJpcEwtYzZiUWs/edit?usp=sharing
devilmaycry2020 said:
i've got it but got bootloop at sony logo. please translate the tutorial step by step how to flash it. can't read chinese language .thanks
Click to expand...
Click to collapse
usually i use kernel with cwm, flash the rom, flash the superSU, and reboot =3
izukamikain said:
usually i use kernel with cwm, flash the rom, flash the superSU, and reboot =3
Click to expand...
Click to collapse
thanks. i dont want unlock bootloader if yes i can easy root 4.3 and not mention here mate.
devilmaycry2020 said:
thanks. i dont want unlock bootloader if yes i can easy root 4.3 and not mention here mate.
Click to expand...
Click to collapse
oh okay i forgot to say that im in UBL. pardon me.
still. thanks for sharing it =D
izukamikain said:
oh okay i forgot to say that im in UBL. pardon me.
still. thanks for sharing it =D
Click to expand...
Click to collapse
no problem
this guide is OK but have a bug is remount reboot problem, that's mean if i copy or delete any file in system folder the phone auto reboot. i've tried to flash remountrebootfix file but after that root had gone. "there is no SU binary installed....." . then i reflash SuperSU 1.93 and root come back but still have remount reboot problem .please help
really would like to try it, understand the procedure but really i have no clue where to download the needed files for XPERIA V...
I guess I only need ROM and kernelonly.ftf!?!?!?
thanks in advance!
doenen said:
really would like to try it, understand the procedure but really i have no clue where to download the needed files for XPERIA V...
I guess I only need ROM and kernelonly.ftf!?!?!?
thanks in advance!
Click to expand...
Click to collapse
Yup, you only need the flash the ROM with your existing recovery
then switch off phone
then u flash kernelonly.ftf using flashtool (flashmode)
this is the link, source from the page OP has linked to.
tps://mega.co.nz/#F!6k40HAxY!E7SSR9Y0un1QzN7it5NNuA
sorry, not enough post to insert link
crexzz said:
Yup, you only need the flash the ROM with your existing recovery
then switch off phone
then u flash kernelonly.ftf using flashtool (flashmode)
this is the link, source from the page OP has linked to.
tps://mega.co.nz/#F!6k40HAxY!E7SSR9Y0un1QzN7it5NNuA
sorry, not enough post to insert link
Click to expand...
Click to collapse
thank you very much! do i keep recovery AND root!?
crexzz said:
Base on your link , for TX -
1) flash ROM in recovery - DO NOT reboot
2) flash lockeddualrecovery2.7.XX-BETA - DO NOT reboot
3) flash UPDATE-SuperSU-v1.9X.zip - DO NOT reboot
4) turn off phone (by taking out battery)
5) flash kernelonly.ftf with flashtool
then you're done
---------- Post added at 09:46 AM ---------- Previous post was at 09:30 AM ----------
For the rest , SP & V -
SP
You'll only need to
1) flash rom - DO NOT reboot
2) flash UPDATE-SuperSU-v1.9X
3) switch off phone (by taking out battery)
4) flash kernelonly.ftf using flashtool in flashmode
V
SP
You'll only need to
1) flash rom
2) switch off phone (by taking out battery)
3) flash kernelonly.ftf using flashtool in flashmode
Prerequisites for all device ( T / TX / V /SP ) -
1) rooted JB 4.1 fw with recovery installed
recommended recovery as follow :
T: lockeddualrecovery2.7.XX-BETA
TX: lockeddualrecovery2.7.XX-BETA
V: CWM6-cDM_v2.5_vfix2
SP: CWM_SP_LB_43
all of which can be found in the specific device thread in XDA
Click to expand...
Click to collapse
hi.
i did as your guide and it's worked, root ok, cwm ok . but 1 big problem.
Have you got remount reboot problem when you copy / delete in system folder ? if no please show me how to do.
devilmaycry2020 said:
hi.
i did as your guide and it's worked, root ok, cwm ok . but 1 big problem.
Have you got remount reboot problem when you copy / delete in system folder ? if no please show me how to do.
Click to expand...
Click to collapse
i am not sure bro, i do not own the Xperia T neither did i try those roms. i only translated the steps to english for you.
could be a few possibilities for such problems
what did you try to delete? if it's apps , why don't u try using uninstaller app to uninstall instead of the usual way using a root browser
did you do anything out of the norm when flashing the ROM, recovery, SU update in recovery AND their kernelonly FTF using flashtool (in flashmode)?
thru out the whole process from flashing ROM till flashing kernelonly FTF, your phone should not be allowed to be booted/start up at all
perhaps you should tried re-doing the whole process and as follow -
1) revert to previous version
2) perform factory reset, including internal storage
3) root & install recovery from computer ( preferred recovery according to the site : XT-lockeddualrecovery2.7.91.installer.zip , or lastest)
4) boot up your phone, check everything is in order and ok, do not even update anything when prompted
5) enter recovery, in successive manner without rebooting your phone thru out,
flash rom
flash XT-lockeddualrecover flashable zip
flash update-supersu
6) after flashing is done, switch off your phone by taking out the battery
7) reinsert battery and DO NOT START your phone
8) place the kernelonly FTF in your flashtool\firmware folder
9) start flashtool, do not change any option and flash the kernelonly FTF to your phone
then you'll be done. Actually i do not see any reason why it'll give any problems unless the ROM or kernelonly FTF is not properly built or corrupted during download
alternatively, if it still gives problem, you can try flashing your own FTF file instead of their kernelonly FTF.
If you flash your own 9.2.A.1.199 FTF, just exclude "system"
disclaimer: i could be wrong
---------- Post added at 05:23 AM ---------- Previous post was at 05:07 AM ----------
doenen said:
thank you very much! do i keep recovery AND root!?
Click to expand...
Click to collapse
Yup, according to the original thread OP.
The ROM downloaded from their thread is supposed to be rooted, deodexed & include philz touch recovery(not stated which version though)
crexzz said:
i am not sure bro, i do not own the Xperia T neither did i try those roms. i only translated the steps to english for you.
could be a few possibilities for such problems
what did you try to delete? if it's apps , why don't u try using uninstaller app to uninstall instead of the usual way using a root browser
did you do anything out of the norm when flashing the ROM, recovery, SU update in recovery AND their kernelonly FTF using flashtool (in flashmode)?
thru out the whole process from flashing ROM till flashing kernelonly FTF, your phone should not be allowed to be booted/start up at all
perhaps you should tried re-doing the whole process and as follow -
1) revert to previous version
2) perform factory reset, including internal storage
3) root & install recovery from computer ( preferred recovery according to the site : XT-lockeddualrecovery2.7.91.installer.zip , or lastest)
4) boot up your phone, check everything is in order and ok, do not even update anything when prompted
5) enter recovery, in successive manner without rebooting your phone thru out,
flash rom
flash XT-lockeddualrecover flashable zip
flash update-supersu
6) after flashing is done, switch off your phone by taking out the battery
7) reinsert battery and DO NOT START your phone
8) place the kernelonly FTF in your flashtool\firmware folder
9) start flashtool, do not change any option and flash the kernelonly FTF to your phone
then you'll be done. Actually i do not see any reason why it'll give any problems unless the ROM or kernelonly FTF is not properly built or corrupted during download
alternatively, if it still gives problem, you can try flashing your own FTF file instead of their kernelonly FTF.
If you flash your own 9.2.A.1.199 FTF, just exclude "system"
disclaimer: i could be wrong
---------- Post added at 05:23 AM ---------- Previous post was at 05:07 AM ----------
Yup, according to the original thread OP.
The ROM downloaded from their thread is supposed to be rooted, deodexed & include philz touch recovery(not stated which version though)
Click to expand...
Click to collapse
thanks.
i want to modding my phone so uninstall app is not i want. i didn't take any things out of ROM zip file.
when i flash kernel, i exclude TA because it will lock SIM
if i flash whole FTF file but exclude system, my rom not deodex anymore ?
which phone have you got ? and your 4.3 dont have remount reboot problem ?
Anyone tried this guide?? but changing or replace the recovery XT-lockeddualrecovery with PhilZ Touch CWM Advanced Edition??......
So like this (For BL) :
Dowload :
1. TX LT29i 4.3 199 deodex USA ROMflash01S.zip
2. XT-lockeddualrecovery2.7.94-BETA.flashable.zip (Replaced to [RECOVERY][T,TL,TX,V][LB]PhilZ Touch CWM Advanced Edition) on this thread : http://forum.xda-developers.com/showthread.php?t=2657190
3. UPDATE-SuperSU-v1.93.zip
4. LT29i_9.2.A.1.199_USA kernelonly.ftf
Then :
1. coming from 4.1.2 JB ROM, Rooted + CWM for NW v8 or v7 is installed
2. flash ROM in recovery - DO NOT reboot
3. [RECOVERY][T,TL,TX,V][LB]PhilZ Touch CWM Advanced Edition - DO NOT reboot
4. flash UPDATE-SuperSU-v1.9X.zip - DO NOT reboot
5. turn off phone (by taking out battery)
6. flash kernelonly.ftf with flashtool
And it's work or doesn't work???....
because I prefer "PhilZ Touch CWM Advanced Edition" than XT-lockeddualrecovery ,
Regards
ibanez7
thanks
ibanez7 said:
Anyone tried this guide?? but changing or replace the recovery XT-lockeddualrecovery with PhilZ Touch CWM Advanced Edition??......
So like this (For BL) :
Dowload :
1. TX LT29i 4.3 199 deodex USA ROMflash01S.zip
2. XT-lockeddualrecovery2.7.94-BETA.flashable.zip (Replaced to [RECOVERY][T,TL,TX,V][LB]PhilZ Touch CWM Advanced Edition) on this thread : http://forum.xda-developers.com/showthread.php?t=2657190
3. UPDATE-SuperSU-v1.93.zip
4. LT29i_9.2.A.1.199_USA kernelonly.ftf
Then :
1. coming from 4.1.2 JB ROM, Rooted + CWM for NW v8 or v7 is installed
2. flash ROM in recovery - DO NOT reboot
3. [RECOVERY][T,TL,TX,V][LB]PhilZ Touch CWM Advanced Edition - DO NOT reboot
4. flash UPDATE-SuperSU-v1.9X.zip - DO NOT reboot
5. turn off phone (by taking out battery)
6. flash kernelonly.ftf with flashtool
And it's work or doesn't work???....
because I prefer "PhilZ Touch CWM Advanced Edition" than XT-lockeddualrecovery ,
Regards
ibanez7
thanks
Click to expand...
Click to collapse
your step is OK, i've tried it before you posted here, but the big problem is if i touch any files in system. my phone auto reboot. very annoy. can't do anything. turn back to 4.1.2
devilmaycry2020 said:
your step is OK, i've tried it before you posted here, but the big problem is if i touch any files in system. my phone auto reboot. very annoy. can't do anything. turn back to 4.1.2
Click to expand...
Click to collapse
You sure its work mate?, okay.. thank for the info, i think the root acces is not fix... need to fix it, (same case as in 4.1.2 build .67), maybe you can try this root fix, but i'm not sure its will work or not :
http://forum.xda-developers.com/showthread.php?t=2334552
ibanez7 said:
You sure its work mate?, okay.. thank for the info, i think the root acces is not fix... need to fix it, (same case as in 4.1.2 build .67), maybe you can try this root fix, but i'm not sure its will work or not :
http://forum.xda-developers.com/showthread.php?t=2334552
Click to expand...
Click to collapse
i'm sure, root OK, CWM ok, i've tried flash remountrebootfix by [NUT] but after flash ROOT HAS GONE, then i reflash superSU, ROOT come back, but remount reboot NOT FIX.
[Q&A][ROM][LB&UB] C690X ★ monxDIFIED ★ Honam1Z™ (KK4.4.2) BEST AROMA [v05-03][07/04]
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click link here>> [LB&UB] C690X ★ monxDIFIED ★ Honam1Z™ (KK4.4.2) BEST AROMA <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP
HOW TO FLASH
well described by the developer himself on the main thread , post #3
http://forum.xda-developers.com/showpost.php?p=46038651&postcount=3
-=-=-=-
down below is the user`s experience as following
-=-=-=-
_*HOW TO FLASH MONX's ROM (4.4.2) v5.0.3 BASE 681*_
*FROM 4.2.2 BASE 534 for model C6903*
*_Files needed to update to 4.4.2_*
Grab flashtool from here
http://www.flashtool.net/download.php
Grab the root tool VROOT from here
http://www.mgyun.com/vroot
Grab recovery from here
http://forum.xda-developers.com/showthread.php?t=2261606
Grab Monx's 681 rom from here
https://mega.co.nz/#!oI4F3a6I!fvDhL38vdJEi4CYdRGQH80ZWxJI3R2ScCbgqMks6SUk
And finally the FTF file from the mega collection here (you can try stripped FTF files but some people have had problems and I have personally tested this method and it's proven to have worked)
The one I used was this one
https://mega.co.nz/#!XgBmHJwT!LWc9mq6mPud756PDKPneHNUkJ7W5bk1llNdtXJS33M4
http://forum.xda-developers.com/showthread.php?t=2469191
*_Installation_*
1. First things first, back up your internal memory.
2. Next if you haven't already install flashtool on your computer.
3. Copy the FTF files into the firmwares folder
4. Power off your phone and run flash tool
5. Connect your phone whilst holding volume down to enter flashmode, flashtool will notify you that you're connected in flashmode.
6. Click the lightening bolt in flashtool then click flashmode, then ok
7. Find the 534 FTF in the list and click flash (this will wipe your internal memory so make sure you did that back up)
8. Once it finishes, detach the cable and power on the device
*Note! at this point your IMEI might be missing, don't worry about that for now just continue*
9. Switch on USB debugging and unknown sources on your device
10. Run the Vroot tool that you downloaded earlier and root your device, it's all in chinese but it's straight forward enough.
11. Once you're rooted, you'll need to install your recovery so go ahead and run the bat file installer, your device will show a request, just click authorize and reboot when in recovery.
*_If everything has gone well then you'll have a recovery and you'll be rooted._*
12. Now copy the 681 Rom from Monx's thread to your internal memory and reboot to recovery.
13. Perform a full wipe in recovery Data / Dalvic and Cache
14. Install the rom with a full wipe (not 100% needed but I like to be sure) 2nd option in aroma
15. Go back to recovery once it's finished and power off your device then re enter flash mode (hold vol down while reconnecting it to your computer.
16. Re-open flash tool and flash your desired 681 FTF file via flashtool, I went for the global FTF which can be found here although other people have confirmed that others will work.
https://mega.co.nz/#!XgBmHJwT!LWc9mq6mPud756PDKPneHNUkJ7W5bk1llNdtXJS33M4
17. To flash this deselect all wipe options and exclude only TA and system *_IMPORTANT_*
18. Begin flashing the FTF file.
Once that's completed you should be on 4.4.2 and everything should be working as expected.
This is for people who are just looking to start from fresh, if you're already rooted and are already using Monx or a similar rom then you can skip steps 1 - 11.
If you experience any issues after installing the ROM then start from 1.
-=-=-=-
thank you @dladz
or two ...
Very welcome m8
Greetings, thank you very much to this ROM because super great, but I have a problem to install the latest version, I get stuck on the logo of sony, follow all the steps and still get the same result when you finish installing the aroma tells me no could complete the installation. any solution?:good:
Try again the steps above, do not reboot the phone after flashing the rom
Power of and use the flashtool to flash the ftf file accordingly
Sent from my Darkside of Nexus 4
Thanks attempts to do so could help me with an image as the flashtool should be marked boxes? :laugh:
Well, Well, Well, I like that..Thanx.
BTW..the kernel is Stock and compatible with LB? ..any monxDIFIED Kernel?
zero_5 said:
Thanks attempts to do so could help me with an image as the flashtool should be marked boxes? :laugh:
Click to expand...
Click to collapse
UNCKECK all WIPE options and CHECK only SYSTEM & TA in options.
Sent from my Darkside of Nexus 4
xanthrax said:
UNCKECK all WIPE options and CHECK only SYSTEM & TA in options.
Sent from my Darkside of Nexus 4
Click to expand...
Click to collapse
if I did not so it works well but the truth I was eager to use the rom but nose is the problem which I hope in following updates not have the same problem thanks : Crying:
I follow the step:
Flashing Generic FTF Fr
Recovery install Z1_DooMLoRD_AdvStkKernel_FW-681_v02.img
then go into recovery mode and install the rom with the second option
finish installing turn off the mobile
Global flash the FTF as indicated me and I stay bootlop
For some reason my camera wont focus and i cant take pictures? I can open it up fine and switch between modes and.stuff but no pics or vids can be taken...i came from ihackers 3.0 with full wipe data,system,cache,dalvik and then flashed monx and.selected full wipe and installed c6902 modules manually amd then used flashtool for the correct ftf! Clearing camera data doesnt fix the issue
Sent from my C6902 using XDA Premium 4 mobile app
ploopower79 said:
For some reason my camera wont focus and i cant take pictures? I can open it up fine and switch between modes and.stuff but no pics or vids can be taken...i came from ihackers 3.0 with full wipe data,system,cache,dalvik and then flashed monx and.selected full wipe and installed c6902 modules manually amd then used flashtool for the correct ftf! Clearing camera data doesnt fix the issue
Click to expand...
Click to collapse
I had exact same problem when I flashed back 4.2.2 on Unlocked Bootloader. Exactly the same.
eclyptos said:
I had exact same problem when I flashed back 4.2.2 on Unlocked Bootloader. Exactly the same.
Click to expand...
Click to collapse
Dang so you started all the way from scratch and still didnt work? Idk man i might have to start over from scratch myself just to see if it works but apart from that everythings great
Sent from my C6902 using XDA Premium 4 mobile app
zero_5 said:
if I did not so it works well but the truth I was eager to use the rom but nose is the problem which I hope in following updates not have the same problem thanks : Crying:
I follow the step:
Flashing Generic FTF Fr
Recovery install Z1_DooMLoRD_AdvStkKernel_FW-681_v02.img
then go into recovery mode and install the rom with the second option
finish installing turn off the mobile
Global flash the FTF as indicated me and I stay bootlop
Click to expand...
Click to collapse
As Xanthrax has said, follow the steps above, it'll work.
---------- Post added at 08:09 AM ---------- Previous post was at 08:06 AM ----------
Partially the reason why I wrote that tutorial from 534 is because I know it'll work, you can start from step 12 if you are already rooted but to avoid issues you should start from 534 it's long and it's a pain but it will work.
I myself had an issue with the camera focusing and I was coming from 136.
Others and myself have had the bootloader issue, you can't get to recovery either.
For all the above, start with the 534 FTF, start with step one and go right through, everything you need is right there.
Hi,
I'm on iHackers v4 (is also he KitKat version) and on NUTs recovery version 101 and LockedBootloader.
The AROMA is confusing me. What steps are needed to get this ROM on my Z!?
In recovery wipe everything
select in AROMA 2 (Factory reset)
select in AROMA 1 (Flash system...)
And now the question:
Because I have the KitKat kernel, do I need to flash any ftf?
Yes, you need to flash the ftf, after aroma flash don't reboot, switch it off and use flashtool
The only solution if you're on bootloop or no boot is to start from scratch with .534, root /recovery
That's why a backup is recommended either nandroid or TB
Sent from my Darkside of Nexus 4
xanthrax said:
Yes, you need to flash the ftf, after aroma flash don't reboot, switch it off and use flashtool
Sent from my Darkside of Nexus 4
Click to expand...
Click to collapse
NUTs striped ftf?
kokett said:
NUTs striped ftf?
Click to expand...
Click to collapse
Yup, the 681 firmware
Sent from my Darkside of Nexus 4
kokett said:
Hi,
I'm on iHackers v4 (is also he KitKat version) and on NUTs recovery version 101 and LockedBootloader.
The AROMA is confusing me. What steps are needed to get this ROM on my Z!?
In recovery wipe everything
select in AROMA 2 (Factory reset)
select in AROMA 1 (Flash system...)
And now the question:
Because I have the KitKat kernel, do I need to flash any ftf?
Click to expand...
Click to collapse
Actually because you're on the same base you might get a way with a dirty install.
Relatively risky as there have been issues with people making the simple jump from the same base, but it's more than likely worth the risk, saying that, flashing the FTF won't do any harm.
@xanthrax
Just to clarify my understanding
Im using NUT's stock 4.4 ROM
If i want to use monxDIFIED ROM
All i have to do is start from step 11 in the OP on how to flash it?
Sent from my C6903 using xda app-developers app
Warning
This ROM will delete all your data so make backup... you have been warned...
Click to expand...
Click to collapse
NOTICE:
Next version ROM you should install it directly through the integrated Philz Touch Recovery...
Click to expand...
Click to collapse
Changelog:
v1
● based on FW 9.2.A.2.5 customized (unbranded) Singapur
● fully functional Philz Touch Recovery 1.7
● fully worked root without additional installation SuperSU
● init-d support
● ES File Explorer
● Titanium Backup
How to install and download links
What do you need for the first installation:
installed flashtool + drivers (will be installed after flashtool instalation)
ftf file with stock JellyBean ROM 4.3 9.2.A.2.5 (original unmodified firmware) -> save to directory C:flashtoolfirmware
zip file with ROM`s -> copy to SD card1 (DO NOT UNPACK)
LT25i_9.2.A.2.5_customized_SG (on xda)
LT25i_9.2.A.2.5_FIX4.3 (on xda)
DK7 kernel vo FlashTool/firmware (FT)
LT25i_FW2.5_root_philz_01 (on xda)
LT25i_FW2.5_deodex-patch (on xda)
Click to expand...
Click to collapse
How to do it?
Unlocked bootloader:
Other stuff you need:
custom kernel:
DK7 kernel
Click to expand...
Click to collapse
Backup your phone.
Shut down your phone
Run flashtool, click on flash icon , select flashmode.
Select file with stock JB ROM from the list. Check "No final verification" and confirm.
Connect the phone after request. Push and hold Volume down and connect cable to PC Wait for flashing to end.
Disconnect phone from PC.
Connect phone to PC and hold Volume up notification led will be blue
In flashtool click on flash icon again, and select fastboot mode.
Select kernel to Flash
In window search for file with kernel (.elf) and select it. Confirm and wait for install to finish.
Disconnect phone and turn it on and wait for magenta LED, next Tapping volume Up until it change to green Enter into CWM.
In CWM select
-> instal zip from sd card --> choose zip from sdcard ---> select .zip (LT25i_FW2.5_root_philz_01 ----> yes
Reboot
Done!
Click to expand...
Click to collapse
Locked bootloader: (Execution LT25i_9.2.A.2.5_FIX4.3 you reach FULL JB4.3 as after flash system through SUS, or PCC)
Other stuff you need:
Installed JB4.1.2 with working recovery.(I recommend cwm v7 from davidmarco)
Click to expand...
Click to collapse
Backup your phone.
Reboot your phone to recovery
In CWM select
-> instal zip from sd card --> choose zip from sdcard ---> select .zip (LT25i.210_nor_deodex_root_philz_v1.zip ----> yes
Power Off
Flash LT25i_9.2.A.1.210_1269-6904_FIX4.3 via FlashTool
Done!
Click to expand...
Click to collapse
Credits:
@DoomLorD for DK7 kernel
@peetr_ for philz touch recovery
@dsixda's Android Kitchen
@Ryuinferno for the init.d support
Click to expand...
Click to collapse
●●● If you like my work, Hit Thanks ●●●
XDA:DevDB Information
[ROM][JB][ALL-BL]stock 9.2.A.2.5 official odex-root&cwm_v1●RELEASED●(27/0, ROM for the Sony Xperia V
Contributors
steveboss
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: FW: 9.2.A.2.5
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-06-27
Created 2014-06-27
Last Updated 2014-08-20
Reserved
Reserved
installing...
ok right now ive done root the JB 4.1.2 and also install the cwm
after install the FW2.5 zip via cwm
what's the next step??
do i need to flashing LT25i_9.2.A.2.5_FIX4.3??
do i need to install LT25i_FW2.5_deodex-patch??
squillaciukm said:
ok right now ive done root the JB 4.1.2 and also install the cwm
after install the FW2.5 zip via cwm
what's the next step??
Click to expand...
Click to collapse
do i need to flashing LT25i_9.2.A.2.5_FIX4.3?? Of course...
do i need to install LT25i_FW2.5_deodex-patch?? It`s optionally
DK7 kernel still works on 9.2.A.2.5?
tleung11 said:
DK7 kernel still works on 9.2.A.2.5?
Click to expand...
Click to collapse
No! It's just an example for a kernel with CWM recovery, because that's what you need to install the ZIP. You could also use NKernel, if you did not have a working CWM recovery.
After flashing the ZIP, the kernel gets overwritten.
dyfk3l said:
No! It's just an example for a kernel with CWM recovery, because that's what you need to install the ZIP. You could also use NKernel, if you did not have a working CWM recovery.
After flashing the ZIP, the kernel gets overwritten.
Click to expand...
Click to collapse
haha thanks, nearly confused - seems like I asked similar stupid question in last version for this old thread. :laugh:
I think I just need the xxxphilz file then, installing.
---------- Post added at 11:58 PM ---------- Previous post was at 11:56 PM ----------
steveboss said:
do i need to flashing LT25i_9.2.A.2.5_FIX4.3?? Of course...
do i need to install LT25i_FW2.5_deodex-patch?? It`s optionally
Click to expand...
Click to collapse
what is the use of FIX4.3? the kernel with CWM?
tleung11 said:
what is the use of FIX4.3? the kernel with CWM?
Click to expand...
Click to collapse
Don`t ask, only install according guide...
..
hi
thanks for root and deodex 9.2a2
please tell me how s that (Installed configuration) for locked bootloader?
post first LB is Unclear
The guide for locked BL is edited
Sent from Xperia V: uniQu3 - If fast just isn't enough
thanks
I can't install kernel.elf ...
What am I doing wrong!? I installed via Flashmode stock JB ROM and checked "No final verification"
Then I try to install kernel.elf and says : "FAILED (remote: The Device must be rooted first)" and I can't enter to CWM.
Help! :C
Thanks!
You have LOCKED BL, you must use guide for LOCKED BL
Sent from Xperia V: uniQu3 - If fast just isn't enough
hi dev, i've used your previous rom .210
i really want to download this but i have internet problems and can't download big files
it took a long time..i receive OTA from update center which is 6mb..what if i download OTA?
will it cause error with your previous rom..?
steveboss said:
You have LOCKED BL, you must use guide for LOCKED BL
Sent from Xperia V: uniQu3 - If fast just isn't enough
Click to expand...
Click to collapse
hi -Thanks for your efforts
I have a problem The use of power management(super stamina)
i after enabled power mana.. Does not work properly light Notification or light manager
please help me
I am asking please edited super stamina apk for Working well light Notification (Removing restrictions)
superstamina is for 4.3 rom
please help. is Necessary
thanks
link1
http://uploadazad.com/uploads/i33q_superstamina.apk
link2
http://www.98up.in/images/x30mjupfd48yo3fhcrou.apk
Sorry before
Can I use the 4.3 FIX for Stock 9.2.A.2.5 (from TFT file, not from you with flashable zip) ?
I found little glitch
Hi guys have this rom super user mod installed?
i flash tha ftf file den install philz recovery.... but when i try to flash tha deoxed patch, i got error, (bad)!
help please.
whalesplaho said:
i flash tha ftf file den install philz recovery.... but when i try to flash tha deoxed patch, i got error, (bad)!
help please.
Click to expand...
Click to collapse
redownload file