Database Develop

**CLOSED**[ROM] [Samsung GT-S5570] Vanilla ROM S5570XWKC1 (Froyo) + Added Features

Re-released flashable zip version for those people who are stuck at Froyo because of modem issues
Features:
Modified CWM to support Froyo. Credits to tj_style for porting CWM on Galaxy Mini ==> http://forum.xda-developers.com/showthread.php?t=1167750
Uses tj_style's overclock kernel ==> http://forum.xda-developers.com/showpost.php?p=12880870&postcount=39
All partitions @ Ext4
Pre-rooted
Deodex
Bootanimation
init.d support (running custom scripts during boot)
cifs and tun modules
Darktremor Apps2SD 2.7.5.3 Beta 03
Removed startup sound
Changed default language to English
Added some live wallpapers
TouchWiz replaced with zeam
Pre-installed apps: OpenVPNSettings (inlcuding binary), Screenoffandlock, and CifsManager
Others
FLASHING DISCLAIMER APPLIES!
Should anything go wrong, please make sure you have a backup of your firmware from samfirmware.com or use CheckFus http://forum.xda-developers.com/showthread.php?t=1032437
How to install from stock firmware:
This procedure assumes that you are still using Froyo so there is no need to flash any firmware
1. Download attached ClockworkMod (CWM) Recovery for Froyo. Flash as 'One Pacakge' using Odin
2. Download S5570XWKC1_MOD_ROM.zip and save it on the root your SD card ==> http://www.multiupload.com/0INURR5M72
3. Turn off phone. Go into recovery mode by pressing and holding the Home + Power buttons. Release buttons when you see the Samsung logo
4. Once you are in recovery mode you will get lot of options on screen. In recovery mode touchscreen does not work, so use the Volume button to toggle through options, Home button to select option or confirm action, and Power or Back button to go back to the previous menu.
5. Select 'wipe data / reset'. Confirm action
6. Select 'install zip from sd > 'choose zip from sdcard' > file in Step 2. Confirm action
7. Go back to previous menu and select 'reboot system now'
Done!
Stock theme
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quadrant (600MHz)
Quadrant (overclocked)

thanks for this rom really like it) i have just 1 tiny problem :-s when i press home and select task manager it force stops :| this is the only thing that bother me

I can't recreate your issue. Does it happen all the time or in just some cases?

Thank you Parasmi!!! You rock!!! Already downloading and I'll give it a try tomorrow!!!

does the dark font in menu exist in this release too?
if not i'm going to install it

trance89 said:
does the dark font in menu exist in this release too?
if not i'm going to install it
Click to expand...
Click to collapse
No because this is stock theme.
Please note this is a Froyo ROM. If you are coming from Gingerbread, you need to flash a Froyo firmware first using Odin.

parasmi said:
I can't recreate your issue. Does it happen all the time or in just some cases?
Click to expand...
Click to collapse
all the time. you know? when i press menu it pops up recent apps and under the task manager.when i press on task manager phone vibrates and i got the "force close " message.same if i press the task manager from menu :-?

Great work Parasmi.
It's just one thing that I will ask you to consider : some apps that you included in the zip package. For instance, AFAIK Root Explorer is only available as paid version only. How could you manage to include it in your ROM ? I hate to see this great ROM turned into a warez ROM. And secondly, SetCPU, though it's free for xda-dev members, its' developer explicitly asked ROM Developers not to include SetCPU. You can see his post here :
SetCPU for Root Users [2.2.4] Undervolting and more 07/07/2011
Or I'll just quote part of his OP here :
coolbho3000 said:
ROM developers: Please do not include SetCPU in your ROM. I appreciate the work you're doing, but link to this thread instead, and I'd really appreciate it if you mention that SetCPU is available on the Android Market.
SetCPU is a CPU speed tweaking application for Android. More specifically, it allows control of certain aspects of the Linux cpufreq driver, allowing for overclocking, underclocking, or tweaking speeds and settings on many Android devices. It will work with most if not all rooted Android 1.5/1.6/2.0/2.1/2.2/2.3/3.0/3.1 builds on most devices.
The program is free here for XDA members. It costs 1.99 on the Android Market and available for purchase on the Amazon Appstore for users in the US.
QR code (please donate by buying it on the market ):
Click to expand...
Click to collapse
Cheers

distan7 said:
Great work Parasmi.
It's just one thing that I will ask you to consider : some apps that you included in the zip package. For instance, AFAIK Root Explorer is only available as paid version only. How could you manage to include it in your ROM ? I hate to see this great ROM turned into a warez ROM. And secondly, SetCPU, though it's free for xda-dev members, its' developer explicitly asked ROM Developers not to include SetCPU. You can see his post here :
SetCPU for Root Users [2.2.4] Undervolting and more 07/07/2011
Or I'll just quote part of his OP here :
Cheers
Click to expand...
Click to collapse
Thank you for the reminder. I'm having seconds thought about them actually. I'll remove them and re-upload a new file

adistf said:
all the time. you know? when i press menu it pops up recent apps and under the task manager.when i press on task manager phone vibrates and i got the "force close " message.same if i press the task manager from menu :-?
Click to expand...
Click to collapse
Not happening to me. Try launching task manager via applications, let's see how it goes

I get E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
when I do wipe data / reset
after that I still go ahead and flash rom zip but it then says
E: Error in /sdcard/S5570XWKC1_MOD_ROM.zip (Status 0)
Installation aborted.
and if I reboot it's stuck at Galaxy mini screen
Any ideas?
I'll have to flash my backup

splattx_x said:
I get E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
when I do wipe data / reset
Click to expand...
Click to collapse
Does you SD have a 2nd partition?
after that I still go ahead and flash rom zip but it then says
E: Error in /sdcard/S5570XWKC1_MOD_ROM.zip (Status 0)
Installation aborted.
and if I reboot it's stuck at Galaxy mini screen
Any ideas?
I'll have to flash my backup
Click to expand...
Click to collapse
Im not sure abour this one. Can you check if the zip file is not corrupted?

parasmi said:
Does you SD have a 2nd partition?
Click to expand...
Click to collapse
No, I only have one partition in FAT format.
parasmi said:
Im not sure abour this one. Can you check if the zip file is not corrupted?
Click to expand...
Click to collapse
I tried once, failed. Then I deleted the file from SDcard, copied it again but it failed again with same error... I was able to extract the zip correctly so I don't think the file is corrupt. Perhaps Latin and European devices are more different than we thought.

splattx_x said:
No, I only have one partition in FAT format.
I tried once, failed. Then I deleted the file from SDcard, copied it again but it failed again with same error... I was able to extract the zip correctly so I don't think the file is corrupt. Perhaps Latin and European devices are more different than we thought.
Click to expand...
Click to collapse
Hhmmm....Let's take this offline. Sent you PM

Hi,
Does this ROM work with my phone?
PDA: S5570XWKC7
PHONE: S5570XXB1
CSC: S5570XXKC3
System information shows me exactly the same version number, except Build is FROYO.XWKC7 compared to FROYO.XWKC1

the same happen with me plz edit ur scrpit and thanks

splattx_x said:
I get E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
when I do wipe data / reset
after that I still go ahead and flash rom zip but it then says
E: Error in /sdcard/S5570XWKC1_MOD_ROM.zip (Status 0)
Installation aborted.
and if I reboot it's stuck at Galaxy mini screen
Any ideas?
I'll have to flash my backup
Click to expand...
Click to collapse
Hey are u trying to do it with rom manager?
Sent from my GT-S5570 using xda premium

debsattam said:
Hey are u trying to do it with rom manager?
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
was trying with CWM. Anyway I was able to upgrade to Gingerbread and then flashed new EmanoN rom based on gingerbread and everything went ok.
Thanks for the help anyway!

what are the modem issues? because i think i face modem issues but i cannot find a thread where somebody has issues like mine

This is an outdated thread. Please go HERE instead

[TOUCHCOVERY] 4EXT Recovery Touch v1.0.0.6 RC 2

Proudly presenting:
4EXT Recovery Touch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brand new user interface: "4EXT UI"
touchscreen only
extremely fast
much more useful features than the already feature-packed 4EXT Recovery Classic v2.2.7 RC5 (see 2nd post)
optionally save space by configuring recovery to exclude /cache from backups
you can configure recovery to save even more space by excluding dalvik-cache from backups
calculates real space needed to complete a backup to save you from troubles
detects your local time zone
-> correct time is used for backups you start from within recovery
allows you to change md5sum check behaviour
displays and updates your current battery level in real time
scrollable texthistory (drag down the statusbar)
built-in interactivity (yes/no questions) for updater-scripts
built-in screenshot functionality
extensive theming capabilities!
nearly ALL YOU SEE is changeable.
"worker bar": create your own custom animations, there are (nearly) no limits! Use any shapes/sizes/animations et.c.
extra low cpu needed for that: absolutely no negative impact on backup/restore speed.
async UI rendering for optimal performance for the "heavy tasks" like backup/restore
backups even faster than with usual recoveries.
.. explore the new interface to see more
includes all features of 4EXT Recovery Classic
​
INFO: ​
For App and Rom devs:​
Make use of the Recovery Interface Api provided by the (free and paid) 4EXT Recovery Apps to push updates/mods/addons for auto installation.
Very easy to use and to integrate into Apps or even shell scripts.
Please check 3rd post.​
Info regarding 4EXT Recovery Touch and its yesno feature, or any interactive installer scripts you might already use, please see 3rd post.​
​
Themes for 4EXT Recovery Touch:
Official 4EXT Recovery Themes Index & Discussion Thread
​
Download​
All downloads are available through 4EXT Recovery Updater.
It's free, no ads, no tracking, no nothing, don't worry
..and of course via 4EXT Recovery Control
This ensures that your downloads are ok by automatically verifying md5sums and that known issues and changelogs are easily accessible
When you install or download a recovery via the app it makes sure that your recovery config is correctly set up.
It allows to automatically setup your time zone for recovery.
You can use it to get notified about updates regarding your recovery version
You can configure it to get notified in case any critical bugs have been discovered of the recovery version you currently have installed.
It allows me to update known issues/changelogs immediately and to quickly pull a newly released version if there were reports about critical bugs
You can also use it to just download a recovery.zip containing the image. The download will be automatically verified for correct md5sums!
​
By default the app also saves the recovery.img you flash on your sdcard,
so you can use it to flash the recovery via fastboot in case you need to do that one day.
If you somehow lost those files, there's a direct download for a version you can flash via fastboot.
4EXT Recovery Control
Free version: Recovery Updater
Fully featured: Recovery Control
For a list of its many features, visit www.4ext.net
Some examples :
Very easy to use, but also includes an extensive set of features available via "advanced mode"
Comfortable configure all settings of recovery
Calculate the space needed to create a new full or advanced backup
So you can make sure the backup will succeed before even rebooting into recovery.
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.​
Identifies and adds your romname so you don't need to type so much when chosing a meaningful name for your backup
When you restore a backup, the app does the md5sum check instead of the recovery
This ensures that you know whether the restore process will succeed before even rebooting into recovery​
Flash as many zip files you want in one go
Automatically calculate and display the md5sums of all zip files you are going to flash
Check your backups' health to ensure they will restore later when you need them, by verifying their md5sums!
Optionally, but highly not recommended:
If md5sums don't match but you really need that backup badly, you might want to restore it anyway.
You can you this app to fix the md5sums of a given backup​
As an example, the following is possible to do in just one session:
Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.​
Much, much more! See www.4ext.net
Big thanks to craacK for a lot of great icons!
​
Thanks:​
Big thanks to DolphiCom for all the graphics, the worker bar and a whole lot of great ideas and to the many great testers who spent all day/night testing, reporting bugs, making suggestions, helping with decisions:
Jotha, craacK, Patrics83, Euphorie, Mike1986, Whiskey103, ptr_hamilton, Lizard, TheUntouchable
Big thanks to Jotha and Whiskey103 for testing the themes features creating and their first themes for 4EXT Recovery Touch.
Also Big thanks to all the donators to 4EXT Recovery and everyone who has bought 4EXT Recovery Control! Without you I wouldn't be able to spend as much time with the project:
SO A HUGE THANK YOU!​
FRANKIE-BOY, SYRAKUS, FISHA21, ZJXPOT, ZEEKIZ, A USER, PHILOS64, STEVEATHOME, PREACHER65, BEN_PYETT, HAWST, ANIT77, ULTRA DROID, PTR_HAMILTON, BEANBEAN50, SEBASTIAAN15 and LOVEBOATCAPTAIN
Of course BIG THANKS to KOUSH for ClockworkModRecovery!
Without him, 4EXT Recovery wouldn't exist!​
Thanks a lot to the following users for initial testing for specific devices :
PTR_HAMILTON, SEBASTIAAN15, THEUNTOUCHABLE, BMONSTER, ANDREIGHERGHE, PRESTON74, MADKAI, YASIR, PLAYPETEPP
IPERZAMPEM0, THESHAWTY, JBBANDOS, GREGFERNS and INCREDULOUS
Special thanks to Invasion2 and Stlouie65 for spending at least 10 hours of their time helping me debug a really nasty issue on the myTouch 4G!
Also thanks for obtaining calibration values for the touchscreen:
Wolfepakt
Jaibar
Jayallen1980
Stlouie65
Invasion2
PacerguyDon
Ben_Pyett
Dargocitfer
Darknessrise1234
Lizard
Azazel71
​

reserved ...

Recovery Interface Api for Apps and Scripts​
Both: free and paid 4EXT apps now provide a very easy to use interface you can use to access 4EXT Recovery from within your shell scripts or apps.
Features:
wipe cache
wipe dalvik
wipe data / factory reset
install multiple zips at once
backup
If you are interested, please download this zip file with examples​
How to make use of 4EXT Recovery Touch from within updater-scripts:​
Since Beta 1.0.0.3 Beta 4 you can do the following:
identify whether the user is running 4EXT Recovery Touch or not (to use or not to use the following commands)
make use of the native yes/no dialogue (confirm / cancel buttons)
prevent recovery from redrawing the screen ( in case you need to use your own 3rd party interactive binary )
​
To identify 4EXT Recovery Touch:
Code:
if getprop("ext.edition") == "ng" then
<your code>
endif;
To use the native confirm dialogues:
Code:
ui_print("4ext: show_yesno"); # <-- recovery will pause your script and display "yes / no" buttons.
run_program("/sbin/sleep", "2"); # <-- for safety since the above is executed asynchronous
#check the return value by calling:
if getprop("ext.confirm") == "yes" then
<yourcode>
endif;
To prevent recovery from redrawing the screen ( if you want to use an external binary that needs to occupy the screen and get the focus )
Code:
ui_print("4ext: disable_scrn_update");
# don't forget to enable it again after your yesno binary or graphical installer is finished, by calling:
ui_print("4ext: enable_scrn_update"); #otherwise the recovery will appear to be frozen as it won't update the screen anymore.

Awesome work madmaxx82 !

You did it again maxx, awesome work!

brilliant thankxxxx

Solved....
This is mother f'n sweet. So stoked bought the 4ext paid control months ago. It was awesome and now this?!?!? Stoked!

download counter: 0
Amazing, am I the first one? download counter:0
This is realy SUPER RECOVERY!!!! Thanks!

this is awesome! thanks max
@ above post, its 0 at my end too so you're probably not the first one

hussainmushahid said:
this is awesome! thanks max
@ above post, its 0 at my end too so you're probably not the first one
Click to expand...
Click to collapse
I am anyway happy with it!

Sweet! Mad you rock.
Sent from my HTC Incredible S using XDA App

thank you maxx. it's working great.

this is for what Bro madmaxx82 ??..
hehe sorry for noob..
just confuse with 4XT Recovery mode..

suaji said:
this is for what Bro madmaxx82 ??..
hehe sorry for noob..
just confuse with 4XT Recovery mode..
Click to expand...
Click to collapse
i think it enable touch when using recovery instead
of you need to press power button / volume button to
control it ....

Omg ... Just when u think this guys can't get any better ... He gets freakin touch support for recovery xD ... Nice work bro
Sent from my HTC Incredible S using XDA App

Thanks maxx! This is awesome! Now I have one more thing to show off to my friends while they're still using text-based recovery.
BTW, when showing a long list (e.g. folder list), it takes a while to scroll to the end to find the back arrow button to go back. I'm sure you can fix it. Thanks again!

itandy said:
Thanks maxx! This is awesome! Now I have one more thing to show off to my friends while they're still using text-based recovery.
BTW, when showing a long list (e.g. folder list), it takes a while to scroll to the end to find the back arrow button to go back. I'm sure you can fix it. Thanks again!
Click to expand...
Click to collapse
You should try back soft button..
Sent from my HTC Incredible S using XDA App

works gr8..perfect

thiagofbrito said:
You should try back soft button..
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
Back soft button works just fine. Thanks!

Looks so cool, works fine too.
Great work!

[APP] Flash Image GUI - Flash Kernels and Recoveries from normal Android mode!

Credits:
birbeck for the usual random java guidance, slushpupie for his previous java guidance, dodgejcr for extreme amounts of testing, and one_love_420 and shift for some great graphics!
testers: JT-, couga6442, happytweak and many others I might have forgot in the furry of three days I built the initial app from scratch.!
Thanks to SDX
Works with HTC Unlock Method:
Tested after using htcdev.com's bootloader unlock method.
Please see the guides at the bottom of this post!
Background:
flash_image (bmlwrite) is an extremely useful utility for flashing custom kernels, boot logos (so far ONLY Samsung devices) and recoveries. This binary has made it possible to easily flash all these items and is used almost everywhere behind the scenes (i.e. in custom recoveries, packaged into a kernel /sbin directoy, included in custom ROMs, etc).
Description:
This android application, FlashImageGUI, is basically a GUI interface for the linux binary, flash_image provided by google in AOSP for loading custom kernels and recovery images onto the phone.
This app allows the flashing of kernels and custom recovery images in normal android mode!
Current Device Support:
Full Kernel, Logo and Recovery flashing: Samsung Moment, Transform, Intercept and Acclaim - the s3c6410 series of devices
Full Kernel (Anykernel and boot.img) Flashing and Recovery (zip file or image) flashing: Sprint HTC One, T-Mobile HTC One, HTC EVO 4G LTE, One S, EVO 3D CDMA and GSM, One XL, Droid DNA, Amaze, Vivid/Holiday, EVO 4G, EVO Shift, Google Nexus 4, Google Nexus 10, Google Nexus 7, Samsung Google Galaxy Nexus, Nexus S/Nexus S 4G & LG Optimus
Full Kernel (zImage) Flashing: Samsung Epic
Check application version for updates
Future Support:
Will continue to test kernels as they are released to ensure compatibility!
YouTube Install Video:
http://www.youtube.com/watch?v=9aqnhFxb__k
Thanks @wwjoshdew !
Install Directions:
Install process is the same as any other .apk. Download to computer and adb push or mount sdcard on computer and copy over or download directly to the phone. Use any file manager, adb, connectbot/terminal emulator to install.
My preferred method, maybe a bit technical: ./adb install c:\downloads\FlashImageGUI.apk
Download Locations
Market (99 cents!): Flash Image GUI
Release version (free): Flash Image GUI
Contact:
Any questions, comments, concerns, or issues, please post in this thread or send me an email! Thanks for all the help and support!
FAQ:
Q: Will this app support a marketplace to pick and chose kernels from?
A: No. Use Kernel Manager!
Q: Can I flash nandroid kernel backups?
A: Yes. Rename the specific image to boot.img and select from inside of Flash Image GUI. **Make sure to also load the associated modules or WiFi might stop working!
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feedback:
Please post any helpful feedback. I'm always looking to improve the application!
HTC Unlock - User Guides for Flash Image GUI!!
HTC Unlock - Users Guide for ROMs with a Kernel (boot.img file):
1) Unlock using the HTC method and gain root access.
2) Load this application, Flash Image GUI, onto the device, either through the Market or the link provided in this OP.
3) Download ROM .zip file to the sdcard on the device.
4) Open up Flash Image GUI, select Browse and select the ROM .zip file, downloaded to /sdcard in the previous step.
5) Flash Image GUI will provide a warning, reminding that the ROM .zip file will *need* to be flashed in the custom recovery afterward.
6) Flash Image GUI will index the full ROM .zip file searching for the kernel and kernel modules. Once located, the Flash Image button should be enabled.
7) Select the Flash Image button and Flash Image GUI will load the kernel modules and kernel from inside the ROM zip file.
8) Select reboot recovery.
9) Inside the custom recovery, wipe data as ROM requires and load/flash the ROM zip file.
10) Reboot to normal Android mode and all should work including WiFi!
HTC Unlock - Users Guide for flashing ONLY a Kernel (zip file):
1) Unlock using the HTC method and gain root access.
2) Make sure the selected Kernel is compatible with the currently loaded ROM. If not, this will result in a lot of frustration!!! See troubleshooting steps below.
3) Download kernel zip file to /sdcard.
4) Open Flash Image GUI, browse and select kernel zip file, downloaded/loaded to sdcard in previous step.
5) Flash Image GUI will validate the kernel zip file is contains the minimum required files
6) Select the Flash Image button and Flash Image GUI will load the kernel and the kernel modules from the source kernel zip file.
7) Reboot
Troubleshooting after Rebooting:
First step, when experiencing issues flashing is to RE FLASH the files again. Many times, re flashing again will clear up any issues. If not, see the issues/solutions below.
Issue #1: If the device hangs or reboots while on the splash screen, the kernel itself or the ramdisk packaged in the kernel is NOT compatible with your device!!!
Solution for #1: Have to boot into fastboot (or directly into the custom recovery) and load the custom recovery to flash a known good kernel or restore a previously known good nandroid backup. Command: fastboot boot c:\downloads\cwm-recovery.img
Issue #2: If the device hangs or reboots while on the boot animation, the ROM is likely NOT compatible with the kernel!!!
Solution for #2: Have to boot into fastboot and load the custom recovery to flash a known good ROM/kernel combination either from a zip file or restore from a nandroid backup.

I actually used this app the other day I used on my evo lte a lot before s-off. Also makes flashing kernels and recoveries a breeze
Sent from my HTCONE using xda premium

This is a great app. Been using it for a while....thanks.
via phONE.

For the guys who never used it,it works great. Forgot how much it was but it was worth every dime.
Just an amazing app.
Sent from my HTCONE using Tapatalk 2

I made a video showing how to update/install custom recovery using your app! Thanks @joeykrim!
http://www.youtube.com/watch?v=9aqnhFxb__k

wwjoshdew said:
I made a video showing how to update/install custom recovery using your app! Thanks @joeykrim!
http://www.youtube.com/watch?v=9aqnhFxb__k
Click to expand...
Click to collapse
Excellent! I've added a link in the OP. Thanks!

App didn't seem to like philz_touch_5.08.5-m7spr.img wouldn't work for me, verified md5 downloaded it twice wouldn't work, then I renamed it to TWRP.img and finally it work and would allow me to hit the Flash Image button.

im0rtalz said:
App didn't seem to like philz_touch_5.08.5-m7spr.img wouldn't work for me, verified md5 downloaded it twice wouldn't work, then I renamed it to TWRP.img and finally it work and would allow me to hit the Flash Image button.
Click to expand...
Click to collapse
The error message that occurs each time you select a file that doesn't fit the naming criteria says, for a boot.img file, it needs to have the phrase "boot" in the name. Just need to add "boot" to the filename, for example: philz_touch_5.08.5-m7spr-boot.img.
Unfortunately, this limitation came about from beginners flashing incorrect files and overwriting their kernels so the device wouldn't boot. No real way around that issue other than silly filename limitations in an effort to education the users.
I test out the function real quick and the error message does come and go fairly quickly. I'll look at adjusting that so it the error message sticks around a bit longer to make it easier to read it.
Thanks for the feedback and hope that helps!

Thanks for the quick reply. This was definately worth the 99 cents. Since I can never get fastboot drivers to work on windows 8.

Myself, I prefer to adb .img's. But for a person who isnt as familiar with adb or someone who just doesnt want to, this is a great app, well worth the .99cnts. Thanks joey.
***Sent from my Super Groovy Hand Held Porno Machine***

Will this let us flash a firmware update instead of using adb? Thanks
Sent from my HTCONE using Xparent Blue Tapatalk 2

treIII said:
Will this let us flash a firmware update instead of using adb? Thanks
Sent from my HTCONE using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Unfortunately, as far as I've seen HTC doesn't allow direct access to the firmware components from the standard booted Android mode. If you see any new information on how to access the firmware components directly, feel free to provide the links here and I'll research.
Thanks for the support!

Official Stable Dual Boot Patcher For Lenovo k4 Note 2/3Gb(unified) variant Guide

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally Dual boot patcher for k4 is back with some hotfixes and 2/3gb variant support ​
GUIDE ​
Download the latest snapshot.apk and utilities zip
Install the app
Open the app
Now swipe to right from the edge of the screen OR tap the three bar lines present at the top left of the app to open up the menu
In that tap on The ROMs section and grant it superuser rights
Now wait for a while
A green tick would have come to your primary ROM
If the app asks You to set kernel tap on Set Now
Now in that primary ROM box tap on the three dots at the right side and a menu will open now
In that tap on Set kernel it will ask you to continue tap on it
Now comes important part if you ever want to dual boot an Android N ROM don't update Ramdisk if You Plan only to Run MM ROMs and want to dual boot then tap on update Ramdisk wait for a while it will ask you to reboot in that tap on reboot now
Now again headover to Menu by tapping on the backarrow present at top left or by pressing hw back key then swipe right from edge of the screen
Now tap on Patch Zip File section in menu
After heading over to Patch Zip File section Tap on Little Pinkish button with + sign Present at bottom right corner of app
After tapping two options will pop-up in that tap on Add flasable zip
Now a filemanager will pop-up locate Your ROM zip file and tap on it (In Android 7+ You have to to long press zip file and pess open at top right)
Now it will pop-up a menu in which don't touch the device pull down menu only tap on Partition configuration pull down menu and select partition of your choice
If You selected Data slot/Extsd slot it will ask you to name it (Enter an ID) type something in small letters there i.e. miui
Now tap on continue
In file manager locate the place where you want to save your patched zip file
Save it And Now tap on the check sign at the top right corner
Let it be patched and while patching or any other DBP operations stay on DBP app only (recommended)
Now again headover to Menu by swiping right side from the edge
And again go in Rom section
And tap on Little Pinkish button at the bottom right it's a in-app flasher It will pop-up a warning simply tap on on do not show again and press ok
Again tap on Little pinkish button present at the bottom it will two options in that select Add patched files tap on it now locate your patched zip in file manager
After that tap on keep location and flash the zip via in app flasher by tapping check button at top right after that flashing will start stay on app only otherwise app will crash/You can use Twrp too to flash that zip
After flashing is done simply reboot voila you will be booted in your second ROM
You must have to download or install apk in your second ROM again
Now if you want to patch any Root (Su) zip or any Mods zip for your second Rom patch the zip for Your ROM partition i.e. if You have Flashed one ROM in Data/extsd by naming miui a new partition named miui (data slot)/(extsd slot)
You can now simply switch ROMs by going in app in that Rom section and tapping on Rom in list
If bootlooped Flash utilities zip through recovery and in that aroma bootup tap on boot to primary OR go in twrp in that install tap install images/img select internal storage locate multiboot folder and in that go in primary folder and flash any of the boot.img present there in boot partition
About partitions :
data-slot = internal storage (can be used)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
​

LINK
OfficialSupportThread​
What's Working :
Dual booting
Bootui on ramdisk update
Appsharing on ramdisk update
Flashing of Each type of zips (improved from last version) now it can flash .dat,nested zips and all stuffs
What are the issues :
On updating Ramdisk FP (Fingerprint) is not working in 7+ custom ROMs So don't update Ramdisk and try
ROMs like Cosmic,Aospex,Tesla (Aosp based) loosing Fp even without updating Ramdisk
Some ROMs loosing network in extsd-slot partition
Sometimes Oem ROMs (epic,miui,nikkali,flyme) causing bootloop in extsd-slot partition but seems to be fixed now as i tested its booting now
Unknowingly everything works fine in data-slot partition don't know about FP not tested much in 7+ Roms without ramdisk update
Sometimes there are internal/external sd not detects in second ROM use third party file manager like solid file manager
For now data slot recommended​
Will try to fix those or will find any workaround for it

Special thanks to:
@chenxiaolong for such an beautiful open source project
@mohancm (For some major fixes)
@nikkali25
@Vijay chandra
@macblaze
@rberk
@ganesh varma (For some major fixes)
( For making such beautiful Roms for our device)​
@nicesoni_ash (For guiding me the basics and helping in every manner he can)
@Nik001 (For hardcore testing)
And atlast Me @dg28gadhavi
Plz give a thumbs up to the thread if you all like it???

dg28gadhavi said:
Proof video ( dual booted @nikkali25 v3.1 based on stock and @mohancm lineage 13 os)
https://drive.google.com/file/d/0B1aa85vwl06bdE9YNG9yOWltWTg/view?usp=drivesdk
Special thanks to:
@chenxiaolong for such an beautiful open source project
@mohancm @nikkali25 @Vijay chandra @macblaze
For making such beautiful Roms for our device
@nicesoni_ash for guiding me the basics and helping in every manner he can
And atlast to my dream to dualboot my k4 & me @dg28gadhavi
Click to expand...
Click to collapse
Awesome, Good work.
I try my roms to support your project

Gr8 work @dg28gadhavi
well done
---------- Post added at 05:50 PM ---------- Previous post was at 05:29 PM ----------
i m not getting data-slot folder after selecting differt location ( not select "Select Keep Location ")
bro plzz tell me what to do now?

shubh.patil153 said:
Gr8 work @dg28gadhavi
well done
---------- Post added at 05:50 PM ---------- Previous post was at 05:29 PM ----------
i m not getting data-slot folder after selecting differt location ( not select "Select Keep Location ")
bro plzz tell me what to do now?
Click to expand...
Click to collapse
1st tell me for which partition you have patched the rom
After patching the rom while flashing you have to select keep location
If for data slot than the folder will be in intenal storage /Multiboot /data-slot
For i.e. first i have patched one rom zip for data slot i will now flash this rom through in app flasher but before flashing i will get a prompt in which i have to select keep location
Now i will see an Multiboot folder in intenal storage in which there will be data-slot keep ,asking me if you get stuck somewhere

dg28gadhavi said:
1st tell me for which partition you have patched the rom
After patching the rom while flashing you have to select keep location
If for data slot than the folder will be in intenal storage /Multiboot /data-slot
For i.e. first i have patched one rom zip for data slot i will now flash this rom through in app flasher but before flashing i will get a prompt in which i have to select keep location
Click to expand...
Click to collapse
i select data-slot
n in internal no intenal storage /Multiboot /data-slot
folder

shubh.patil153 said:
i select data-slot
n in internal no intenal storage /Multiboot /data-slot
folder
Click to expand...
Click to collapse
Have you flashed the zip by keep location??? You have to flash first

shubh.patil153 said:
i select data-slot
n in internal no intenal storage /Multiboot /data-slot
folder
Click to expand...
Click to collapse
After patching is done you have to flash the zip in the in app flasher then you will find the Multiboot folder

WOW ,,Awesome WORK,,Will giv it a try now :good::good::good::good::fingers-crossed::fingers-crossed::fingers-crossed:

dg28gadhavi said:
After patching is done you have to flash the zip in the in app flasher then you will find the Multiboot folder
Click to expand...
Click to collapse
alll done bro:good:

shubh.patil153 said:
alll done bro:good:
Click to expand...
Click to collapse
Dual booted or not???

dg28gadhavi said:
Dual booted or not???
Click to expand...
Click to collapse
boot bro
but lost of bugs in 2nd os
howto delete 2nd os for re flash

shubh.patil153 said:
boot bro
but lost of bugs in 2nd os
howto delete 2nd os for re flash
Click to expand...
Click to collapse
Go in the apk go in rom section select second Rom
Select the wipe rom options and select all things to wipe Note you must be primary rom before doing this
See this

dg28gadhavi said:
Go in the apk go in rom section select second Rom
Select the wipe rom options and select all things to wipe Note you must be primary rom before doing this
See this
Click to expand...
Click to collapse
done bro
now i ll flash again lineage 13

I am not able to find data-slot in multiboot folder..

Nik001 said:
I am not able to find data-slot in multiboot folder..
Click to expand...
Click to collapse
First flash the patched Rom
Read step 5 too

dg28gadhavi said:
First flash the patched Rom
Read step 5 too
Click to expand...
Click to collapse
I have done that. And select that dual boot patched rom

Nik001 said:
I have done that. And select that dual boot patched rom
Click to expand...
Click to collapse
O sorry Just after flashing tap the secondary rom once you will get and error saying failed to switch Rom then go to Multiboot folder an folder called data-slot will be created I am adding this to guide plz reply if it works

dg28gadhavi said:
O sorry Just after flashing tap the secondary rom once you will get and error saying failed to switch Rom then go to Multiboot folder an folder called data-slot will be created I am adding this to guide plz reply if it works
Click to expand...
Click to collapse
Okay done. After that where to put boot.img from patch rom.
In mutliboot>data-slot-data>boot.img or in internal>data-slot-data>boot.img

[EXPERIMENTAL][TESTING][29-3-17] MultiRom Latest For kenzo/kate

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For kenzo/kate​Supports all Roms (SHOULD)​
NOTE:
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
What is MultiRom?
MultiRom is one-of-a-kind multi-boot mod. It can boot any Android Rom as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiRom can boot from USB drive connected to the device via OTG cable. The main part of MultiRom is a boot manager, which appears every time your device starts and lets you choose ROM to boot. Roms are installed and managed via the modified TWRP recovery. You can use standard ZIP files to install secondary Android Roms, daily prebuilt image files to install Ubuntu Touch and MultiRom even has its own installer system, which can be used to ship other Linux-based systems.
I am not the developer of MultiRom. All Credits for it goes to Tasssadar, the actual developer of it.
Features:
MultiBoot any number of Android Roms
Restore Nandroid Backup as secondary ROM
Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting
Boot from USB drive Attached via OTG cable
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash Stock Rom zips again. Make backups. Always.
TESTED ON ROMS:
Test and Report
SUPPORTED DEVICES:
kenzo
kate
Please Test it in other Similar SD Variants and Report it Below.
Bugs:
You tell me
SCREENSHOTS:
All Screenshots HERE
INSTALLATION INSTRUCTIONS:
Via The MultiRom Manager App:​This is the easiest way to install everything MultiRom needs... Just follow the Below Instructions:
Install the app (Links Below)
Select MultiRom and Recovery on the Install/Update card.
Press "Install" on the Install/Update card to start the installation.
DONE! MULTIROM IS READY TO ROCK!
You current rom will not be erased by the installation.
Download link is in the second post.
Adding ROMs:
Android
Boot into MultiRom Recovery -> select MultiRom -> Add Rom -> Select the Rom's zip file and click Confirm.​
Updating/changing ROMs:
1. Primary Rom (Internal)
Flash Rom's zip File as Usual, Do factory reset if needed (it won't erase secondary Roms)
Go to MultiRom in recovery and do Inject curr. boot sector.
2. Secondary Android Roms
If you want to change the Rom, delete it and add new one. To update the Rom, follow these steps:
Go to MultiRom -> List Roms and select the Rom you want to update.
Select "Flash zip" and Flash the Rom's zip File.
Explanation of recovery menus:
Main menu
- Add Rom - Add Rom to Boot
- List Roms - List Installed Roms and Manage Them
- Inject boot.img File - When you Download something, for example a Kernel, which is Distributed as a Whole boot.img (eg. Qassam Kernel), you have to use this option on it, otherwise you would lose MultiRom.
- Inject curr. boot sector - Use this option if MultiRom does not show up on boot, for example after Kernel Installation.
- Settings - Well, SETTINGS!
Manage Rom
- Rename, Delete - No Need to Explain this I Think!
- Flash Zip (Only Android Roms) - Flash zip to the Rom, for example GAPPS
- Add/Replace boot.img - Replaces boot.img used by this Rom, this is more like a Developer Option.
- Re-Patch init - This is available only for Ubuntu. Use it when Ubuntu cannot find the root partition, i.e. after apt-get upgrade which changed the init script.​
GitHub Source Codes:
MultiRom Organization for Xiaomi Devices​Kenzo/Kate MultiRom Device Trees​MultiRom Manager App Source Codes​
Current Status:
Test and Report...
CREDITS:
Rishabh Rao (ME) - For Porting MultiRom to kenzo/kate
Tasssadar - For his awesome MultiRom
nkk71 - For his No-KEXEC workaround
Version Information:
Status: Unofficial, IN TESTING, Version 33
ENJOY!:good:
XDA:DevDB Information
MultiRom For kenzo/kate, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Rishabh Rao
Source Code: https://github.com/multirom-xiaomi
Version Information
Status: Testing
Current Beta Version: v33
Beta Release Date: 2017-03-29
Created 2017-03-29
Last Updated 2017-03-30

1.Can I flash any Other Kernel?
- YES! You CAN flash ANY Kernel!!!
2. Can I Flash Roms to USB-OTG? How?
- Yes, You CAN Flash Roms to USB-OTG.
Follow these steps to do so:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on Add Rom.
4. Select the correct Location and Flash it...
Note: Flashing on a USB-OTG takes some Time, so be patient & Don't Worry!
3.Where to Find Roms Installed in my USB-OTG Drive? How to Boot into Them?
- After Flashing the Rom you will be Booted into the MultiRom Boot Menu.
All your Roms Flashed on the Internal Memory will be in Internal Tab.
All Others will be in the External Tab.
4. How to Rename/Remove/Delete/Wipe Dalvik Cache or Flash any Other zips to an Existing Rom?
- Follow these steps:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on the Rom which you want to Remove/Add zips.
You will find all the options you need there!
5. "Unable to Flash, I am getting Errors" / "Executing Updater Script Failed" / "Rom is not Booting". ANY HELP???
- Please Provide Logs. It will be located in /sdcard/multirom/error.txt OR if that's not present here: /proc/last_kmsg
It would be Great if you can Provide Some Screenshots.
Press Volume Down + Power Buttons Together to take Screenshots.
6. How to Disable Auto Boot / Change Rom Name / Hide Roms / Change Brightness of MultiRom Boot Menu?
- Follow these steps:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on the 3 Dots on the Top Right of the Screen.
4. Select Settings.
You will find all the Customizations of the MultiRom Boot Menu you need there!
7. What is the No-Kexec Workaround?
- The No-Kexec Workaround by @nkk71 allows you to use MultiROM without having to flash a Kexec Enabled Kernel.
Please read More about No-Kexec Workaround from the author words only (to avoid duplicity and to get the latest information), thanks to @nkk71 once again!
http://forum.xda-developers.com/showpost.php?p=68738134&postcount=4

Download Links:
MultiRom Manager App 2.4-rishabhrao

Guys please test this in your Kenzo/Kate and Please tell me how it works

Will it work on 16 gb

pdpmoto said:
Will it work on 16 gb
Click to expand...
Click to collapse
All devices which support TWRP 3.1 official for kenzo or kate should definitely support this
Well try it out, definitely won't harm your device....
Also, uninstaller inckuded
Sent from my LeEco Le 2 using XDA Labs

Will test after exam
---------- Post added at 12:10 PM ---------- Previous post was at 12:00 PM ----------
Everything is ok as of now twrp flashed but will check more if i am in my town because If something go wrong then i will fix with my pc

Does it support the sailfish os?

Is f2fs supported?
Because I can't inject current boot sector

Anyone know if MIUI works?

Installing now on miui,reaaaally thx,because I was working on it without any result....
I will report if it worked
---------- Post added at 08:26 AM ---------- Previous post was at 08:17 AM ----------
It doesn't work on miui
It injects mltrm but,after a reboot boots normally.
Also its impossible to add roms,it says:
Failed to extract update script
Erasing incomplete Rom...
Plz fix it....

SMYM said:
Installing now on miui,reaaaally thx,because I was working on it without any result....
I will report if it worked
---------- Post added at 08:26 AM ---------- Previous post was at 08:17 AM ----------
It doesn't work on miui
It injects mltrm but,after a reboot boots normally.
Also its impossible to add roms,it says:
Failed to extract update script
Erasing incomplete Rom...
Plz fix it....
Click to expand...
Click to collapse
Hey Thanks a lot for trying and reporting...
Can you test something?
Just install mrom from app
Then goto recovery and add rom and see if you can add roms?
Also try once without injecting anything?
Coz that sometimes works too?
Sent from my LeEco Le 2 using XDA Labs

午夜听雪 said:
Does it support the sailfish os?
Click to expand...
Click to collapse
try it !

Rishabh Rao said:
Hey Thanks a lot for trying and reporting...
Can you test something?
Just install mrom from app
Then goto recovery and add rom and see if you can add roms?
Also try once without injecting anything?
Coz that sometimes works too?
Click to expand...
Click to collapse
I can't add any rom and the mltrm menu hasn't been shown up...

SMYM said:
I can't add any rom and the mltrm menu hasn't been shown up...
Click to expand...
Click to collapse
Let me check it out once...
EDIT: Can anyone try on some Rom other than miui?
So i can get a sure idea if it's a problem only with Miui or with all Roms...
Sent from my LeEco Le 2 using XDA Labs

I tried installing a few different ROMs and it always gave an error..
Hope this helps

Doesn't seem it is able to install roms to the sd card

4I-I said:
I tried installing a few different ROMs and it always gave an error..
Hope this helps
Click to expand...
Click to collapse
I have exactly the same error...

SMYM said:
I have exactly the same error...
Click to expand...
Click to collapse
Download links

[email protected] said:
Download links
Click to expand...
Click to collapse
Download via the app attached to first post