Related
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
You could try Recovery mode and wipe.
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
help please
donACEsko said:
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
Click to expand...
Click to collapse
but my buttons vol down and vol up doesn't work
lgo51 said:
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
Click to expand...
Click to collapse
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
RTFM !
keki92 said:
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
Click to expand...
Click to collapse
The keys needed are: POWER and HOME
The keys not used are: VOLUME +/-
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
I think he(or she) want a stock rom only. You need to do a full wipe after flash with odin. Maybe touch recovery helps you, but i cant find any . You can go to download mode by "adb reboot download" , i think it cant success without wipe.
Or maybe try to flash a rom with 5 files as SuperAce609 said.
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
yeowwwai said:
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
Click to expand...
Click to collapse
no need for that bro !!!!
@OP
just go to recovery > factory reset(wipe data)
and then reboot......Ur done
so simple.....
lol. u guys didnt even try to understand what his problem in the first place. atleast read the first post properly before giving suggestions.
the poor guy had his vol up and down button broke, and u suggest him to wipe data in recovery.
thing is his vol up and downn button doesnt work! so how can he navigate in recovery? lol
btw op, u said that u flashed onepackagee file via odin. so how did u manage to go into download mode in the first place when your vol down button is busted?
if u managed to go into download mode again, this time flash the full package instead.
SuperAce609 said:
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
Click to expand...
Click to collapse
I am having the same problem.
The phone keeps rebooting on startup. The phone can go in download mode but can't go in recovery mode.
Do you know any good link to download multi file package? I can't seem to find it anywhere
which Rom You were using and which firmware do you want?
keki92 said:
which Rom You were using and which firmware do you want?
Click to expand...
Click to collapse
My phone was running 2.2.1 Froyo. I tried to upgrade it to 2.3.6 using process mentioned here. http://androidadvices.com/update-gal...wktm-firmware/
The Odin completed successfully and restarted the phone. But the phone was running spanish language. I was getting an alert after every 3-4 seconds. But i could not read it as it was spanish. I restarted the phone and it went in boot loop. The phone keeps rebooting every 2 seconds.
I can't get into recovery mode but I can get to download mode.
I have tried flashing many ROMs from sammobile.com but none of them is working.
Hello everybody, my phone doesn't start.
He starts just on mode downloading after branch in USB.
Help me please.
Sorry for my English.
if download mode works, try install stock rom through odin then u can do whatever u want
MariusiK31 said:
if download mode works, try install stock rom through odin then u can do whatever u want
Click to expand...
Click to collapse
I have already tried him and when he gives restart on Odin, my telephone does not start.
enzoo96 said:
Hello everybody, my phone doesn't start.
He starts just on mode downloading after branch in USB.
Help me please.
Sorry for my English.
Click to expand...
Click to collapse
try to take out battery for a minute then put it back and switch on
enzoo96 said:
I have already tried him and when he gives restart on Odin, my telephone does not start.
Click to expand...
Click to collapse
u mean bootloops or doesn't start at all ? can u enter cwm ?
MariusiK31 said:
u mean bootloops or doesn't start at all ? can u enter cwm ?
Click to expand...
Click to collapse
He does not start, and I can not enter it cwm
Hard brick?
If so, sending it to a Samsung Center is your best bet.
Sent from my CM7 GT-S5570I
NightRaven49 said:
Hard brick?
If so, sending it to a Samsung Center is your best bet.
Sent from my CM7 GT-S5570I
Click to expand...
Click to collapse
+1 it's hard bricked
same thing happen to me
I experience that too last 6months to be exact, as long as you can access download mode and it is readable by your laptop/computer you can fix it, download any ONE PACKAGE stock room in firmware.com then flash it via Odin after that process finish
go to cwm
just power button + home button
then reset and wipe
please feedback as soon as you do my tips thanks!
goodluck! :good::good:
grimmjowjak said:
I experience that too last 6months to be exact, as long as you can access download mode and it is readable by your laptop/computer you can fix it, download any ONE PACKAGE stock room in firmware.com then flash it via Odin after that process finish
go to cwm
just power button + home button
then reset and wipe
please feedback as soon as you do my tips thanks!
goodluck! :good::good:
Click to expand...
Click to collapse
I flashed and I can not go to cwm
enzoo96 said:
I flashed and I can not go to cwm
Click to expand...
Click to collapse
how about normal booting after flashing via odin?
grimmjowjak said:
how about normal booting after flashing via odin?
Click to expand...
Click to collapse
It's doesen't start
Blank Screen
I installed the wrong cwm on mine and when I tried to boot into recovery all I got was a blank screen, so I waited for a bit, then pulled the battery, turned phone on and nothing but a blank screen, tried getting into DL mode and nothing, but when I plug it into the PC, it wants to recognize as a modem instead. I think its toast, I even made a jig, tried getting into DL mode and nothing, the phone is on just no screen, it charges the battery when plugged into usb port but nothing on the screen. It had worked until I flashed cwm on it...
go to stock recovery
why don't you just enter into stock recovery and factory reset the phone , you can also flash the stock rom with odin after puting your phone in download mode . to go to recovery vol+ and vol- and power on the phone at te same time
Didn't you read? He has neither download nor recovery mode.
Sent from my CM7 GT-S5570I
Hi, i have a big problem, i can't go to Download Mode (via Odin) by pressing volume down power and home button, now i cant boot into phone cause i format system , data, modem and preload. i try do pick out the battery but nothing... i need help.
edit: now i have flashed the stock firmware but i cant access recovery because volume butttons dont work and when i reboot device it goes in bootloop cause i havent wiped data before flash stock rom. is there anyway to reboot recovery with adb?
xOasis1A said:
Hi, i have a big problem, i can't go to Download Mode (via Odin) by pressing volume down power and home button, now i cant boot into phone cause i format system , data, modem and preload. i try do pick out the battery but nothing... i need help.
edit: now i have flashed the stock firmware but i cant access recovery because volume butttons dont work and when i reboot device it goes in bootloop cause i havent wiped data before flash stock rom. is there anyway to reboot recovery with adb?
Click to expand...
Click to collapse
In ADB you can use exacly what you wrote:
adb reboot recovery
Try it while phone is bootlooping.
If that do not work - fix volume up button. At service center.
shut_down said:
In ADB you can use exacly what you wrote:
adb reboot recovery
Try it while phone is bootlooping.
If that do not work - fix volume up button. At service center.
Click to expand...
Click to collapse
i dont know why but the buttons worked when i was in the phone before flashing stock firmware but doesn't work for recovery and download...
just nother question, if i have the /data of cyanogenmod they cant give me back the phone cause i had root?
xOasis1A said:
i dont know why but the buttons worked when i was in the phone before flashing stock firmware but doesn't work for recovery and download...
just nother question, if i have the /data of cyanogenmod they cant give me back the phone cause i had root?
Click to expand...
Click to collapse
I am not sure about that. But you do not have any system on phone... Maybe to see on some non official service.
First try with that adb command.
shut_down said:
I am not sure about that. But you do not have any system on phone... Maybe to see on some non official service.
First try with that adb command.
Click to expand...
Click to collapse
adb give me error: device not found.
xOasis1A said:
adb give me error: device not found.
Click to expand...
Click to collapse
Wait some time, do adb devices too to see if it shows.
shut_down said:
Wait some time, do adb devices too to see if it shows.
Click to expand...
Click to collapse
i try it but nothing, today it's the first time that i try to use adb. but anyway thanks for your help, tomorrow i'll go to service center. i hope they will solve it in less than 2 week cause i'have to go in spain...
xOasis1A said:
i try it but nothing, today it's the first time that i try to use adb. but anyway thanks for your help, tomorrow i'll go to service center. i hope they will solve it in less than 2 week cause i'have to go in spain...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2105707
You can try with this. It has reboot to recovery in power options. Just wait some time to see if adb will initilize.
If you get adb, hit Power than Recovery.
hello all friends.
I have a hard brick in my Z3c ... rather than install a full rom, I installed an update to 135 MB, and had given full wipe the system the device simply does not care anymore.
FlashTool does not work, already tried everything and it will not.
Error of drivers but they are installed all the drivers ... ok.
I TWRP on the device but can not access it for flashing back up what I had done.
Simply do not have access into the Z3c ...
Some logical solution to this problem ??
Grateful to all the friends who can help.
Can u open recovery mode?
Majin Aiman said:
Can u open recovery mode?
Click to expand...
Click to collapse
Not possible enter in recovery... TWRP instaled e backup , im not access into Z3C.
Are u tried recharging?
Unlocked bootloader?
Is the front panel led still working?
Can't you see the Sony logo?
If you press power + volume. up for some seconds, does the phone vibrate?
Fastboot mode?
istux said:
Unlocked bootloader?
Is the front panel led still working?
Can't you see the Sony logo?
If you press power + volume. up for some seconds, does the phone vibrate?
Click to expand...
Click to collapse
hi i have the exact same problem. tried flashing a rom and reboot system. but the phone wont turn on. red led flashes when connected to usb. phone vibrates once when press power, vibrates 3 times when i press power + up vol rocker. but nothing on screen for both instances. is it a hard brick? cant access recovery
kingsfall1233 said:
hi i have the exact same problem. tried flashing a rom and reboot system. but the phone wont turn on. red led flashes when connected to usb. phone vibrates once when press power, vibrates 3 times when i press power + up vol rocker. but nothing on screen for both instances. is it a hard brick? cant access recovery
Click to expand...
Click to collapse
Nope, it's just a soft-brick
Press power + vol.up until it vibrates 3 times.
Then flash a stock firmware with Flashtool. Look here: http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
istux said:
Nope, it's just a soft-brick
Press power + vol.up until it vibrates 3 times.
Then flash a stock firmware with Flashtool. Look here: http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
Click to expand...
Click to collapse
wow it really works. thank you so much! by the way do u happen to know why there is an error of "E:error executing updater binary in zip" on TWRP when i try to flash a rom
kingsfall1233 said:
wow it really works. thank you so much! by the way do u happen to know why there is an error of "E:error executing updater binary in zip" on TWRP when i try to flash a rom
Click to expand...
Click to collapse
I had that exact problem when installing Cyanogenmod a couple of days ago, realized there was no internal storage anymore so i flashed a pre root zip and got my files back.
I was using XZDR, I think it is just a problem with the latest twrp...
Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?
code_blanc said:
Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?
Click to expand...
Click to collapse
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Thank you for the reply. I figured it out shortly after posting this question. Thanks for your help..
can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.
i tried this one but it didnt work
LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse
lawrenzdr said:
i tried this one but it didnt work
Click to expand...
Click to collapse
If this method didn't work, maybe it has a hardware issue so check ur phone in any repair shop
lawrenzdr said:
can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.
Click to expand...
Click to collapse
There must have been written something like "you are not using official software press the power key to continue".
So, Just press the power key.
LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse
mine also same problem done above thing did'nt work, could u help my problem
Error verifying vbmeta image: invalid vbmeta header (6) VBMETA M315FXXU3CVH1, 54678140R
Trying to root my galaxy M31 by flashing a TWRP recovery file but I got this above error!... Finally end up with... Neither I can restart phone (volume down + power) coming to same screen nor enter to TWRP recovery mode (volume up + power) also...
forum.xda-developers.com
Root sonrası parmakızı çalışmıyor, bu sorun nasıl çozebilirim
Fingerprint does not work after root, how can I solve this problem?
Roottan sonra parmak izi çalışmıyor, bu sorunu nasıl çözebilirim?Fingerprint does not work after root, how can I solve this problem?