Hi guys, thanks for the forum and i hope to become a part of it. I've been under so much stress since yesterday, my galaxy s3 (on EE in the UK) for the first time decided it's data was corrupted yesterday after my battery died, never done this or anything like it before, and it wouldn't let me access the phone itself unless the data was reset.
I had a lot of very precious pictures in my gallery from the weekend, which unfortunately chose not to backup to google+ for the last few days, even though it always has up until recently. All night/day i've been trying to figure out and get software to recover these photos, which i think is possible as i did it a long time ago on a blackberry, but not android yet. I'm just hoping it can be done so the photos aren't forever lost, the other stuff gone doesn't bother me so much.
The guide i'm following (here: http://forum.xda-developers.com/gal...de-internal-memory-data-recovery-yes-t1994705) says it needs to be rooted first, and i can't even get past step 1. I've only ever rooted my old galaxy S1 (which worked back then) but i can't seem to get the S3 to do it. And now my phone also believes there's no sim card in and i get no signal now.
this is the guide i followed: http://www.ibtimes.com/how-root-sam...-jelly-bean-official-firmware-tutorial-975812
though i think i need a newer PDA file to flash my i9305 with. I'm on the EE network running 4.3 jelly. It installed Super SU but root checker says it still isn't rooted.
So have i messed this up? And is there any hope for me getting these pictures back?
Thanks in advance for any help, it's much appreciated.
if you are running on 4.3 then you are not following the right guide to root...
use THIS ONE instead... if it fails to root use the workaround part, i used it and worked....used the workaround to install custom recovery and then flashed chainfire zip from his website and updated SU and worked.
are you still able to boot the phone?
Thanks for the response, tried that guide and still getting no signal on my phone (no mobile connection at all, sim card isn't recognised as being there) and i don't think it's rooted right. Still saying SuperSU has stopped working when i try to open it.
I put the Root_SuperSU.1.02-Busybox.1.21.0.zip on the internal SD and tried that too.
Which is the chainfire zip you're talking about, could you possibly link it? I don't really get what you mean by custom recovery, do you mean it's the same as flashing the Busybox thing from recovery mode?
And yeah it still boots up normally...
use that tutorial to install a custom recovery...then install this SuperSU - http://download.chainfire.eu/396/SuperSU/UPDATE-SuperSU-v1.94.zip?retrieve_file=1 - flash it in custom recovery....after that update app with playstore and should work.
but i suggest you get it to a specialized shop to get your photos back...
Related
Wondering if any of you guys could help me out here?
By the way, if this is the wrong section for this, apologies and feel free to move?
Nexus 7, 16gb, rooted with stock 4.1.2. I have not edited the build.prop, still using the 4.1.2 Keyboard, Gmail etc.
So, nothing changed other than unlocked/rooted.
I have superSU pro and have 'Survival Mode' enabled, which is basically and OTA Rootkeeper (I am sure you already know this...)
When we got the OTA to 4.1.2, it worked no problem, survival mode worked and I kept root and custom recovery.
So this morning I get a notification to upgrade to 4.2, which I done. It restarted, and installed with no errors etc, then comes the Google screen with the unlocked padlock... and it stayed this way for an hour, so I am assuming it is borked?
I restarted it, same again, so rebooted into the bootlaoder menu. Going into recovery shows the android dude on his back, red triangle ! etc, so I gather my custom recovery is gone.
So the question is, where to go from here, and is there a walkthrough I can use to resuce this (I am techy enough minded, but given the state it is in, loathed to make it worse down to sheer stupidity)?
Any help would be much appreciated guys.
BTW - I used Wugs Toolkit to root, so that is all set up with drivers etc, can that be used now to recover?
No ideas?
i have previously unlocked bootloader and rooted my device using the Hasoons all in one tool kit and then had been using ard 12.1.
I then fancied trying the latest GE 4.3 release (stock) which i downloaded and flashed and all seemed fine however when i went to check root was still there i have the icon but get a message saying that there is no su binary installed. I have tried to use the toolkit again to go back the root procedure in the hope i can re-install what ever is missing however for some reason now the tool kit comes up with an error message in the box saying waiting for device or device not recognized.
I have tried to sort the problem but now feel i am just going round and around in circles and really dont have the knowledge to put it right as im quite new to the flashing and modding side and dont fully understand all the terminology, im sure its probably something really simple to fix for those who know how so would really appreciate some advice.
My overall aim would be to be running the stock rom (or might even try the new arhd 4.3 ge) with root so that i can then use the volume + to wake mod as i find this really usefull as my power button is quite depressed and hard to use.
hpsauce37 said:
i have previously unlocked bootloader and rooted my device using the Hasoons all in one tool kit and then had been using ard 12.1.
I then fancied trying the latest GE 4.3 release (stock) which i downloaded and flashed and all seemed fine however when i went to check root was still there i have the icon but get a message saying that there is no su binary installed. I have tried to use the toolkit again to go back the root procedure in the hope i can re-install what ever is missing however for some reason now the tool kit comes up with an error message in the box saying waiting for device or device not recognized.
I have tried to sort the problem but now feel i am just going round and around in circles and really dont have the knowledge to put it right as im quite new to the flashing and modding side and dont fully understand all the terminology, im sure its probably something really simple to fix for those who know how so would really appreciate some advice.
My overall aim would be to be running the stock rom (or might even try the new arhd 4.3 ge) with root so that i can then use the volume + to wake mod as i find this really usefull as my power button is quite depressed and hard to use.
Click to expand...
Click to collapse
hello you are in need of the new 4.3 superuser.zip
http://download.clockworkmod.com/test/superuser-4.3-beta3.zip
if you are using CWM, when it asks to fix su upon reboot, select NO
Wow thank you!!!!!
You have no clue, or maybe you do, how lost I got trying to root my HTC One. This is all new to me, but this forum has helped massively. I found that the supersu zip I had was the older version when I already had 4.3 uploaded before rooting. This community rocks!
why do my gapps processes keep crashing?
NM forgot to full wipe
So I have the same issue - my only question is that I am running 4.4 now. Does this super user file still work or is there a 4.4 version?
Just use "SuperSu" if you face any root acces issues
Sent from my loved HTC One S using (most time buggy) Tapatalk
HHEELLPPP
Hi there, Im new to the rooting world, I have a htc one m7 from sprint trying to sim unlock it, as far as I know I unlocked the bootloader, tampered it, and rooted, but no access to super user so I can sim unlock it. I downloaded and installed this App that you mention, but still keeps saying no binary updated, and with this 4.3 version says there was an error installing superuser. Please help, I dont know what to do.
I was having this same issue on my Note 2 (4.3). I seem to have found a way to restore root that may help you as well.
I think this issue may be caused by the SU app & binary updates. Uninstalling the updates has restored root for me.
Go to:
Settings > More > Application Manager > All > SuperSU > Uninstall updates
(menu options may be slightly different on other devices)
This will roll back SuperSU and hopefully restore your root access.
Let me know if this helps.
Any updates on this? I'm trying to get root on an HTC One M7 that I just purchased and I'm running into the same error.
Thanks!
#1-"com.tmobile.pr.adapt (10001) has been granted superuser permissions for an interactive shell" pops up on my screen every 30 seconds on the bottom of my screen in a grey box.
#2- i also noticed that i can accept and recieve calls but i can not hear, nor can the other person hear me. if i use hangouts video call, skype, etc it works fine.
#3-i also tried to get rom manager to make a recovery and it says it needs to get CWD recovery to install a new software, the first thing we need to do is install a up to date version, we will begin that process now... etc.. then it says to get started you must first sset up a custom recovery, it gives two options a samsung galaxy s3 on metro pcs or a samsung previal 2 on boost mobile, or device not listed, when i click that it says "SM-G920T does not have an officially supported CWDR yet. Have you installed a CWD based recovery manually?" so im not sure what to do from there, or if i even need that. i have been a iphone user since day one went to android after reading up a lot on it, although rooting is quite different than jailbreaking it seems, i am incredibly excited to get started if i can get past these little problems and get started and figure everything out. ANY advice, or anwsers to these problems would be Greatly appreciated! thanks!
Also i went to dev options in settings and noticed the "OEM unlocking- allow the bootloader to be unlocker" was turned off, i dont know if this is necessary to root if i did something wrong by not turning it on or what, or if it may fix any problems above if i turn it on now. thanks!
I have a samsung Galaxy S6 (SM_G920T) . i Rooted and did not trip Knox, Although i did just remember that my fingerprint sensor is not working either.
Thank you guys so much this si a incredible forum i have spent hours and hours reading and researching before making this post i appreciate it so much!
#1 Freeze that ****. Use some root tool to freeze that T-mobile apk, seems u gave it root permissions at some point. I believe there are a lot of apps that you will want to do the same.
#2 ? No idea. Stock rom/kernel?
#3 What is this I don't even. Don't do that. Go to TWRP's official web, get your zeroflte (SM-GT920T) twrp and flash it via ODIN, or else get the recovery.img and use flashify. All that assuming you want a custom recovery.
You will need to unlock the bootloader if you are on 5.1.1. I believe locked will prevent changes or wiping anything on the OS partitions, even recovery (can someone confirm?)
I believe jailbraking and rooting should be pretty much similar, if not the same, as both target to grant the user root access to do whatever he pleases on the OS.
Welcome to android btw.
How did you root? Sounds like you used the modified sboot which causes no sounds in calls and nonfunctional fingerprint scanner. If so, flash back to stock and use a different rooting method. The rest, pretty much what the above poster stated
Root
I rooted using the version that I found the only one that works it seemed like, went to Odin put my phone In download mode and then put the boot loader download in BL and the. Put a something unikernel.sbin I believe, whatever the guide said also then it was done. I thought you couldn't use the twrp or custom recovery etc on tmobile one yet but I just read a thing about xtrestolite odex pure v2 which says it's for 5.1.1 and my model of phone but in the guide it says to root using CF auto root and a link there to it but the link doesn't have my phone on the list that the guide that clearly is my phone says to use I don't know if I'm missing something but I want to use it I understand most of it but I don't know if I need to unropt first and re root then use Odin and flash twrp that's supported on my phone then use that to recover the rom. Etc. The kernel that says is used in the guide is the same one I downloaded so do I need to remove it all then let it do that or?
Sorry if this didn't make sense I'm halfway there between confused and understood I have spent the last 10 hours reading and trying to figure this out though lol. Thanks guys!
Also
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Just flash the 5.1.1 firmware to return to stock. To root, flash unikernel with Odin. The other method you used was to not trip knox, but as you experienced has side effects. I had to Odin back to 5.1.1 myself. Can't have those issues
thanks!
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
CjetOKC said:
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
Click to expand...
Click to collapse
Yes, flashing to 5.1.1 works exactly like that. You need to get the version for your model (very important on this one) and then simply place that file in the AP field of ODIN while the device is in recovery mode. It is normal for ODIN to freeze for 2 minutes while verifying. Make sure to use a MD5 checker tool on the firmware before flashing.
Rooting has historically required more technical savvy and balls than jailbreaking, but PingPong made rooting the S6 brain-dead simple. CF-Auto root is still pretty painless, but you must make sure you have the right zip for your device.
Anyhoo, the quickest & easiest way to restore phone calls & fingerprint scan is to use Odin to get back to bone stock.
Next, use PingPong to root. After rooting, "com.tmobile.pr.adapt" will ask for root access. That is T-Mobile's "phone home" app and sends info about your device (probably including root status). Deny it root access and make sure you check "Remember my choice", and it won't bother you again. You will not lose any functionality by denying it root, so terminate that crap.
Don't bother with rom manager. CWM is archaic. If you want a custom recovery, use TWRP. You can install TWRP either using Odin or TWRP Manager app (it's free).
Good luck and have fun with your S6
CjetOKC said:
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Click to expand...
Click to collapse
Are you still rooted? If so, and if you are experiencing the call audio issue, go flash AOU's kernel. He has made a kernel for the tmo s6. that should eliminate your call audio issue. The finger print scanner is the only issue with flashing his kernel. Also, I rooted with the modded sboot, his TWRP and kernel, and I didn't trip knox
http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Hi all,
I have been hammering away at this one, and putting it on the back-burner, but now, it is really getting to me. Samsung Galaxy Tab Pro 10.1 SM-T520
It has been rooted with ODIN, and shows no problem, (things seem much easier now, as I have re-jigged lots of my old phones using so many more tools, I am not an expert, but can read and search without too much problems) I was very careful to choose the correct file, CF-Auto-Root-picassowifi-picassowifixx-smt520.zip, I have rechecked this step several times, as most of the instructions I found ODIN device ID:COM box should become yellow, when on newer versions it is blue I think, I wondered if I was going mad,
Root Checker Root access granted, all fine. I have Root access. n.
Installed CWM ,latest recovery for a Pro 10.1 wifi, recovery 6.0.3.1 Titanium backup-ed, all ready to go and Reboot and flash a new ROM.. No joy. .. Installed TWRP , same.
When it re-starts it ,shows the galaxy logo, flashes off, then back on, and then fails. Android dead with a red warning , standard recovery KOT49H.T520XXUANAE, all I can do is the usual options:apply update. The only thing I haven't tried is to just wipe all the data. I have a backup of my apps with Titanium Backup on the SD card,I am not that bothered really about much other data if its a pain. I just want control of my device and to try a new ,cleaner ROM(SMT520_GraveD_V3.0)
This has been bothering me for ages, I have read so many posts so am now getting really frustrated I have bought triangle away app. today although I think I sorted that issue early on anyway , but just in case...
Super SU seemed to have vanished so that is back installed
I think I searched and found the Mount/system issue and looked into an issue that lead me to the .system folder, but it is hidden, so I could not find the file it related to. I dont have the specifics to hand as I checked it out at work. I wondered if it is because I have ES file manager, not ASTRO as it said in some of the posts I found.but sure this is a red herring.
I have tried everything..I have a Mac at home and PC at work, I have tried ADB and can see &restart the device etc... so I am connected, first I got the error that it didn't recognise the sideload command. Read up on ADB , looked at the help etc. sideload isn't there as a command, very confusing. But I think I got there one I figured out paths, as of course they are different on a Mac, and possibly more so as I have 2 drives in it, which often confuses me ..grr.
I can of course get into the bootloader, with ON+VOL -, it tells me so far the system is : Official and Knox Warranty Void: 1 which I think is fine, but a chap at work suspected this, but after lots of threads I gather this is normal..
Sorry if long, just thought I should be as clear as possible. I have not really come across such an awkward issue as this , my HTC One was a breeze:crying:
*edit* Just worked out through trial and error, that to use the sideboot command I had to select send via ADB and now with the path /Desktop/SMT520_GraveD_V3.0.zip I was able to send the file but with the following messgae : E:footer is wrong and E:signature verification failed, twice.. So some progress
Thanks !
Just to say after being up waay too long on this, I discovered there is a newer firmware T520XXUANI1_T520BTUANI1_BTU which I may aswell upgrade to first, but of course I cannot do this OTA now As it recognises the device is 'tampered with' *sigh* so gun and games with Odin for Mac tonight, or JODIN3 , just to get the firmware upgrade(which seems to be a jungle of fake download links). before a Rom without bloatware..
I am also not completely clear why, as from another thread about KNOX, as I am basically running stock , without custom recovery.. According to this thread , but I am getting a bit confused now
http://forum.xda-developers.com/gal...neral/knox-warranty-void1-otas-t2996067/page2
Click to expand...
Click to collapse
however this is another story from the ROM install. Apologies
Well. No replies, but I did eventually solve this. Hopefully this can help someone. I am a tinkerer, but I really nearly gave up on this..But this was a cheap second hand tablet ( my first) and I want to see what it can do before I test drive one on my mother who is having nightmares with every Windows laptop I give her!
Once I got to a PC , I had access to Odin3, although it is not available online (apparently to Mac) I could not get it to work due to Java issues (JOdin3 online - brilliant idea but no joy for me so far)
I had the Rom I wanted ( GraveDigger- SMT520_GraveD_V3.0.zip ), the firmware update (T520XXUAOD2_T520BTUAOB1_BTU.zip(i think)) and the unlock file (CF-Auto-Root-picassowifi-picassowifixx-smt520.zip) , non of which I could install in any way , due to being locked out of using a custom Rom bootloader!
At this point I factory reset and cleared the cache( as that is the only options in the basic bootloader!) I also has ADB on the PC so attempted to install the files this way (after messing about using some software to produce the .tar and .md5 files needed for Odin. I tried everything to get this into proper 'bootloader mode' all from scrach again, including trying the adb oem unlockbootloader command, which I would never get to work as I could not get there!
With Odin, I was also again able to flash the firmware update, eventually, and of course had to unlock again. I was curious if I could now use the OTA update, and could not. At some point, in repeating this process( as I think it hung up several times and needed a hard reboot) I had at this point fully wiped the device as I know that is another reason to have glitches and an unstable ROM later.
I think I then tried to check and although T520XXUAOD2 seems to still be the firmware, at some point I managed to get online ( I think some superuser app which I have had to try several may have notified me that KNOX was reset:laugh:When I go to About>Software update it said I had the latest update! Good news!
At this point I had installed both CWM and TWRP again , and thought I would try TWRP.I had tried CWM and the same problem, like a double flash of the Samsung Logo , so I know it had reset !!
THIS TIME I used TWRP ( I thought of trying CWM touch, but its either paid, or I would have to find and ABD the file over I guess) , I managed to re-apply the Root file, Root checker confirmed this , as it had throughout this ordeal!, although apart from ACCESS GRANTED I dont really know what the rest means..Anyway although picassowifi , was still in Device name on TWRP I chose an earlier recovery version to install.- twp-2.7.0.0-picassowifi.img. When I re-booted, I was able to get the TWRP recover image, and install the ROM, I cannot remember if I re-rooted as I was so elated.
I had a few , freezing moments, reinstalling most of my apps through Titanium Backup, I think I just tried to reinstall everything which of was unnecessary, after a hard reset, all seems fine. I checked and the TWRP recovery seems to have stuck. I am not entirely sure how to check about the firmware , but for now I feel this is progress.
Good Luck if anyone found this any use.
Just to add, when you search this ( and probably many other models) you seem to get so many sites, offering exactly the same unlock information, in exactly the same way, many of the downloads seem to take you to many weird and wonderful places. So I tended to look here for downloads if possible. But I had to join SamMobile (which seems a useful site for the firmware upgrade) and trawl all over and assume similarities between other Samsung devices to fully check I was not being an idiot. But this was very odd and I could not find any posts or other workarounds that I did not try. But this new ROM feels lovely and smooth so far, and I now want to look into this tablet further
Good evening and sorry if post a thread of which I see two similar oness
However, I could not find a solution in the other ones and have questions which go a little further and really hit my privacy.
I have two XZ3 and both could go into recovery node when I bought them and after a while could not.
I used the reset to factory seting fo wiping cache etc. quite regularly as I had/have reasons to belive that I was/am spied on.
Sice the recovery mode possibility is gone I feel totally unsafe with both phones.
I tried all possibilities I can find of this website or any other in internet, and all were without success.
As described by others, after pushing the power button, there is no led light and it boots suoer-quicklyto the blue stripe view in which we wait till the boot is complete.
Till two days ago I thought ok, the phone just needs a flash, wipe everything away once and all would be resolved.
Well, two days ago I flashed my phone the first time from lollipop to kitkat, which worked without problems and then rooted it with gifroot and then put back lollipop.
Everything ran smoothly and after the whole process I had a rooted lollipop version with a working recovery. I tried the apps which confirm if the root works abd everything was great.
Tthe morning after, however the recovery possibility was gone. The phone was still rooted for everything, but for recvery mode.
I tried several apps, which I gave superuser access with SuperSu, but even from the apps the boot goes always just the NORMAL way without recovery.
To give it another try today I flashed that xz3 again, then rooted it with Kingo root, which in Kitkat firmware worked lalso super easy, the checked with other apps whihchconfirmed that the root works, but still no recovery possibility, no matter with which app..
I really need a specialist who can explain that to me, as I am going mad to think that someone else has total control over my phones.
How realistic is that some spyware does not allow the recovery as of course it knows that it would be eliminated then.
Please give me your thuoghts or knowledge. Everything helps. And if you know a method with which I can be sure that nothing is keft on the phone, I would appreciate.
Thanks and Regards
iFran72 said:
Good evening and sorry if post a thread of which I see two similar oness
However, I could not find a solution in the other ones and have questions which go a little further and really hit my privacy.
I have two XZ3 and both could go into recovery node when I bought them and after a while could not.
I used the reset to factory seting fo wiping cache etc. quite regularly as I had/have reasons to belive that I was/am spied on.
Sice the recovery mode possibility is gone I feel totally unsafe with both phones.
I tried all possibilities I can find of this website or any other in internet, and all were without success.
As described by others, after pushing the power button, there is no led light and it boots suoer-quicklyto the blue stripe view in which we wait till the boot is complete.
Till two days ago I thought ok, the phone just needs a flash, wipe everything away once and all would be resolved.
Well, two days ago I flashed my phone the first time from lollipop to kitkat, which worked without problems and then rooted it with gifroot and then put back lollipop.
Everything ran smoothly and after the whole process I had a rooted lollipop version with a working recovery. I tried the apps which confirm if the root works abd everything was great.
Tthe morning after, however the recovery possibility was gone. The phone was still rooted for everything, but for recvery mode.
I tried several apps, which I gave superuser access with SuperSu, but even from the apps the boot goes always just the NORMAL way without recovery.
To give it another try today I flashed that xz3 again, then rooted it with Kingo root, which in Kitkat firmware worked lalso super easy, the checked with other apps whihchconfirmed that the root works, but still no recovery possibility, no matter with which app..
I really need a specialist who can explain that to me, as I am going mad to think that someone else has total control over my phones.
How realistic is that some spyware does not allow the recovery as of course it knows that it would be eliminated then.
Please give me your thuoghts or knowledge. Everything helps. And if you know a method with which I can be sure that nothing is keft on the phone, I would appreciate.
Thanks and Regards
Click to expand...
Click to collapse
Spyware cannot affect Recovery unless it is granted root permissions and is embedded on system.
Also do not use KingoRoot, a thread in the SG note 3 forums reported Spyware installed after using it, source. For now steer clear of that application until all claims have been proven false
At any rate, ( assuming you have Unlocked Bootloader ) just flash another kernel with recovery, do a full wipe including formating the system partition and restore your system via flashing a rom
9
Revontheus said:
Spyware cannot affect Recovery unless it is granted root permissions and is embedded on system.
Also do not use KingoRoot, a thread in the SG note 3 forums reported Spyware installed after using it, source. For now steer clear of that application until all claims have been proven false
At any rate, ( assuming you have Unlocked Bootloader ) just flash another kernel with recovery, do a full wipe including formating the system partition and restore your system via flashing a rom
Click to expand...
Click to collapse
i got that problem i cant hard reset my phone i forgott my posswords and the key combo dosent work and i have never rooted before, can you give me a step by step for dummie (me)
petterssonjohan said:
9
i got that problem i cant hard reset my phone i forgott my posswords and the key combo dosent work and i have never rooted before, can you give me a step by step for dummie (me)
Click to expand...
Click to collapse
If you can enter flash mode, flash the latest firmware and software for your device using flash tool.
What is flash mode? I can get the phone in a mode where the indicator lamp turns blue is it that?
get Flashtool @ https://xperiafirmware.com/flashtool/
it includes Xperiafirm so you can download a stock ROM for your device and build an .ftf file
when you have the ftf file, drag it into the main Flashtool window
follow prompts