I know this one has been answered a few times in pieces, and somewhat understandable manner. However, I wanted to decrypt this for everyone to be able to understand how to do it and to overcome this particular issue.
Issue: You have a custom recovery installed and your LG G2 prompts you to install the new OTA (i.e. KitKat update). You then accidentally/unknowing of consequences accept the update. Your phone restarts and keeps going to the custom recovery which you had installed, instead of booting to the update. You endlessly try to boot to your phone, but it just keeps going back to your custom recovery.
Things to do ahead:
1. Have LG G2 drivers installed on computer you will be using. You can get those from the LG website easily by searching LG G2.
2. Obtain ADB and fastboot files from HERE
3. Obtain working TWRP vs 2.7.0 from HERE if you don't have the TWRP recovery installed (i.e. if you're using CWM or Philz recovery).
Recovery Procedure:
1. If you have TWRP recovery installed, proceed from step 9
2. If you have CWM or Philz recovery installed, follow these next steps.
3. When inside CWM/Philz recovery, click on option to install zip.
4. Have your phone connected to a computer which has the LG G2 drivers installed, found on LG's site. Make sure to install drivers without phone connected to computer first. After installing, restart computer, and then plug phone to computer USB port.
5. Now that you have the phone plugged to comp, and that the comp has recognized your phone, open up CMD and navigate to the folder where you have your ADB file located and workable TWRP recovery zip file.
6. Once there, click on install using sideload on your phone's custom recovery which should be located inside the install zip option.
7. Then type in CMD on computer this: ADB sideload TWRP-file-name.zip
Note. Replace TWRP-file-name.zip with whatever the TWRP zip file on your computer is named to the letter.
8. Your phone will install TWRP recovery at this point. Once it finishes, restart your phone by rebooting recovery (should be an option somewhere there in the main level of the recovery)
9. TWRP should boot now. Once inside TWRP, click on Advance
10. Then click on Terminal Command
11. Next click on Select
Note: Do not navigate to any other folder. Just click on Select. You'll know what I mean once your in Terminal Command.
11. Type this command in the space provided in your phone (NOT in CMD) which should be now in Terminal Command mode exactly to the last letter. I'm not kidding; don't miss a character or replace a number. You risk nuking your phone. Double check your typing.
Type this: dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Note: You should note that there is a space between dd and if=/dev, and another space between /zero and of=/dev
12. Once the command finishes running, about 30 seconds or less, restart phone. And voila. Your phone should boot back to your pre-selecting update with OTA mode.
In my case, I wiped everything and tried restoring one of my nandroids. That did not help me boot my phone. However, when I did the above mentioned steps, my phone booted to my backed up state which I installed prior.
Hopefully you don't end up being a victim of this. But if you are, now you can confidently bring yourself back :good:
Good luck and share your progress. Thanks!
Cheers,
~Atrio
Terminal Command didn't work ...
AtriosM3 said:
I know this one has been answered a few times in pieces, and somewhat understandable manner. However, I wanted to decrypt this for everyone to be able to understand how to do it and to overcome this particular issue.
Issue: You have a custom recovery installed and your LG G2 prompts you to install the new OTA (i.e. KitKat update). You then accidentally/unknowing of consequences accept the update. Your phone restarts and keeps going to the custom recovery which you had installed, instead of booting to the update. You endlessly try to boot to your phone, but it just keeps going back to your custom recovery.
Things to do ahead:
1. Have LG G2 drivers installed on computer you will be using. You can get those from the LG website easily by searching LG G2.
2. Obtain ADB and fastboot files from HERE
3. Obtain working TWRP vs 2.7.0 from HERE if you don't have the TWRP recovery installed (i.e. if you're using CWM or Philz recovery).
Recovery Procedure:
1. If you have TWRP recovery installed, proceed from step 9
2. If you have CWM or Philz recovery installed, follow these next steps.
3. When inside CWM/Philz recovery, click on option to install zip.
4. Have your phone connected to a computer which has the LG G2 drivers installed, found on LG's site. Make sure to install drivers without phone connected to computer first. After installing, restart computer, and then plug phone to computer USB port.
5. Now that you have the phone plugged to comp, and that the comp has recognized your phone, open up CMD and navigate to the folder where you have your ADB file located and workable TWRP recovery zip file.
6. Once there, click on install using sideload on your phone's custom recovery which should be located inside the install zip option.
7. Then type in CMD on computer this: ADB sideload TWRP-file-name.zip
Note. Replace TWRP-file-name.zip with whatever the TWRP zip file on your computer is named to the letter.
8. Your phone will install TWRP recovery at this point. Once it finishes, restart your phone by rebooting recovery (should be an option somewhere there in the main level of the recovery)
9. TWRP should boot now. Once inside TWRP, click on Advance
10. Then click on Terminal Command
11. Next click on Select
Note: Do not navigate to any other folder. Just click on Select. You'll know what I mean once your in Terminal Command.
11. Type this command in the space provided in your phone (NOT in CMD) which should be now in Terminal Command mode exactly to the last letter. I'm not kidding; don't miss a character or replace a number. You risk nuking your phone. Double check your typing.
Type this: dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Note: You should note that there is a space between dd and if=/dev, and another space between /zero and of=/dev
12. Once the command finishes running, about 30 seconds or less, restart phone. And voila. Your phone should boot back to your pre-selecting update with OTA mode.
In my case, I wiped everything and tried restoring one of my nandroids. That did not help me boot my phone. However, when I did the above mentioned steps, my phone booted to my backed up state which I installed prior.
Hopefully you don't end up being a victim of this. But if you are, now you can confidently bring yourself back :good:
Good luck and share your progress. Thanks!
Cheers,
~Atrio
Click to expand...
Click to collapse
I repeated this three times, and no luck... any suggestions?
I did it a tad differently. I am running Windows 7.
First I downloaded these universal drivers so my phone was recognized under Device Manager, went to my adb directory with command prompt and typed the following:
adb shell
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
I just preferred using the keyboard, but your directions will work, too.
secure booting error
got the OTA update ...after that boots to Logo with a "secure booting error" message then a black screen, can't go to download mode, phone is recognized as QHSUSB in device manager, factory recovery doesn't work.
what can be done in this case??
eddie 2t said:
got the OTA update ...after that boots to Logo with a "secure booting error" message then a black screen, can't go to download mode, phone is recognized as QHSUSB in device manager, factory recovery doesn't work.
what can be done in this case??
Click to expand...
Click to collapse
U had a custom recovery flashed correct? To me it sounds like your on stock recovery
bleedingthru said:
U had a custom recovery flashed correct? To me it sounds like your on stock recovery
Click to expand...
Click to collapse
I rooted the phone, tried to install clockwork but didn't succeed so I forgot about it, then the update totally screwed me.
eddie 2t said:
I rooted the phone, tried to install clockwork but didn't succeed so I forgot about it, then the update totally screwed me.
Click to expand...
Click to collapse
Ive never used cwm on this device only twrp so i dont know about that recovery
boot
I have philz touch and all my phone will do is boot to philz?
Related
Hi, I know this is going to sound so stupid but I need help ASAP.
I was fooling around with installing different ROM's for my HTC One, I tried the Google Edition for a while and decided it wasn't for me as I lost the TV remote. I then tried to re-flash the Android Revolution HD 12 I had on before and it wouldn't flash. I thought a wipe would work but now I've succeeded in ending up with a TWRP recovery that works fine but no software whatsoever to flash or boot to. The phone says 'No OS Installed'
Every time I turn off the phone it also says that it doesn't appear to be rooted, do I want to install supersu? The phone says 'unlocked' with CID 11111111
I have totally fallen into the idiot trap, too much confidence and ambition, zero skill and talent.
NailFace said:
Hi, I know this is going to sound so stupid but I need help ASAP.
I was fooling around with installing different ROM's for my HTC One, I tried the Google Edition for a while and decided it wasn't for me as I lost the TV remote. I then tried to re-flash the Android Revolution HD 12 I had on before and it wouldn't flash. I thought a wipe would work but now I've succeeded in ending up with a TWRP recovery that works fine but no software whatsoever to flash or boot to. The phone says 'No OS Installed'
Every time I turn off the phone it also says that it doesn't appear to be rooted, do I want to install supersu? The phone says 'unlocked' with CID 11111111
I have totally fallen into the idiot trap, too much confidence and ambition, zero skill and talent.
Click to expand...
Click to collapse
You should be able to use this toolkit to install SU and also to sideload a rom zip from your PC to the phone to reinstall your ROM of choice. Sounds like you wiped your data partition entirely. Since you have S-off and Super CID you should have no problems loading another rom. Just have to use one of the creative ways to get it on the phone (sideload, USB-OTG adapter, etc.)
http://forum.xda-developers.com/showthread.php?t=2242635
crushalot said:
You should be able to use this toolkit to install SU and also to sideload a rom zip from your PC to the phone to reinstall your ROM of choice. Sounds like you wiped your data partition entirely. Since you have S-off and Super CID you should have no problems loading another rom. Just have to use one of the creative ways to get it on the phone (sideload, USB-OTG adapter, etc.)
http://forum.xda-developers.com/showthread.php?t=2242635
Click to expand...
Click to collapse
Thanks for your reply,
could you do a step by step guide for me please, I don't have an USB-OTG adaptor.
I cannot install the program, it says its not supported by my OS (im on Windows 8)
NailFace said:
Thanks for your reply,
could you do a step by step guide for me please, I don't have an USB-OTG adaptor.
Click to expand...
Click to collapse
The steps should be here in the guide:
http://forum.xda-developers.com/showthread.php?t=2325853
Also here for sideload:
http://forum.xda-developers.com/showthread.php?t=2318497
crushalot said:
The steps should be here in the guide:
http://forum.xda-developers.com/showthread.php?t=2325853
Also here for sideload:
http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
I really need a more step by step guide, I've ****ed things up already so I think I need a baby walk through
NailFace said:
I really need a more step by step guide, I've ****ed things up already so I think I need a baby walk through
Click to expand...
Click to collapse
Well the easiest way to do a sideload is using the All in One tool. Do you have access to any other PC that have Windows 7 or XP? I don't have a win 8 system to try to assist with compatibility mode with the one.exe tool.
If no other PC options are available then we will have to go the long way which will involve installing ADB like in this guide: (Under Installation section - It has 5 steps for installing ADB)
http://forum.xda-developers.com/showthread.php?t=1427008
Once ADB is installed we can use these steps from the sideload guide that I posted:
Make Sure HTC Drivers are installed and ADB is already working
1. Reboot into TWRP
2. in TWRP, Hit advanced and find Sideload
3. Swipe to start Sideload
4. Open a CMD Prompt window and Change Directories to where your adb.exe is
5. type adb devices and it should show your device connected and say sideload
6. Your ZIP file should already be in your adb folder - See Example Below
7. You are now ready to push the zip.....
8. type adb sideload nameofzip.zip <------------See Example Below
9. Wait until it says 100% and reboot back into recovery to flash the ROM
10. If hitting power does not make the screen come one, type adb reboot recovery
11. if adb reboot recovery does not work, hold power and volume down until it reboots to fastboot then go to recovery
crushalot said:
Well the easiest way to do a sideload is using the All in One tool. Do you have access to any other PC that have Windows 7 or XP? I don't have a win 8 system to try to assist with compatibility mode with the one.exe tool.
If no other PC options are available then we will have to go the long way which will involve installing ADB like in this guide: (Under Installation section - It has 5 steps for installing ADB)
http://forum.xda-developers.com/showthread.php?t=1427008
Once ADB is installed we can use these steps from the sideload guide that I posted:
Make Sure HTC Drivers are installed and ADB is already working
1. Reboot into TWRP
2. in TWRP, Hit advanced and find Sideload
3. Swipe to start Sideload
4. Open a CMD Prompt window and Change Directories to where your adb.exe is
5. type adb devices and it should show your device connected and say sideload
6. Your ZIP file should already be in your adb folder - See Example Below
7. You are now ready to push the zip.....
8. type adb sideload nameofzip.zip <------------See Example Below
9. Wait until it says 100% and reboot back into recovery to flash the ROM
10. If hitting power does not make the screen come one, type adb reboot recovery
11. if adb reboot recovery does not work, hold power and volume down until it reboots to fastboot then go to recovery
Click to expand...
Click to collapse
I owe you a beer, thank you very much. Everything working now.
I'm worried.
I went to install a new rom, so formatted my sd card first, without realising it I've wiped my backups and also the rom I was going to flash. I can still get into twrp but I have no idea how to get a rom across to my handset.
ive tried fastboot update but i just get "waiting for device"
Someone please help
gsusx said:
I'm worried.
I went to install a new rom, so formatted my sd card first, without realising it I've wiped my backups and also the rom I was going to flash. I can still get into twrp but I have no idea how to get a rom across to my handset.
ive tried fastboot update but i just get "waiting for device"
Someone please help
Click to expand...
Click to collapse
Triy adb sideload, links for how to http://www.google.nl/url?sa=t&rct=j...v4l4QSOgEwWvPXvTXm_X0Kw&bvm=bv.48705608,d.ZWU.
1. Connect your phone make sure it's actually connected and you have the drivers.
If you don't have the drivers check this out: http://forum.xda-developers.com/showthread.php?t=1983470
2. Rename the ROM you want to flash to something basic, I used Find5.zip
3. Open CMD (command prompt), navigate it to the folder you placed the ROM
(e.g. code: cd C:\Users\Jelle\Downloads\ will navigate to my Downloads folder)
4. Boot to recovery on your phone and enable the ADB sideload function.
5. in CMD type adb sideload Find5.zip
6. Let TWRP or CWM flash the zip and prompt for reboot.
7. Reboot and be happy, your phone is fixed!
gee2012 said:
Triy adb sideload, links for how to http://www.google.nl/url?sa=t&rct=j...v4l4QSOgEwWvPXvTXm_X0Kw&bvm=bv.48705608,d.ZWU.
1. Connect your phone make sure it's actually connected and you have the drivers.
If you don't have the drivers check this out: http://forum.xda-developers.com/showthread.php?t=1983470
2. Rename the ROM you want to flash to something basic, I used Find5.zip
3. Open CMD (command prompt), navigate it to the folder you placed the ROM
(e.g. code: cd C:\Users\Jelle\Downloads\ will navigate to my Downloads folder)
4. Boot to recovery on your phone and enable the ADB sideload function.
5. in CMD type adb sideload Find5.zip
6. Let TWRP or CWM flash the zip and prompt for reboot.
7. Reboot and be happy, your phone is fixed!
Click to expand...
Click to collapse
you're a gentleman
im downloading the drivers now
gsusx said:
you're a gentleman
im downloading the drivers now
Click to expand...
Click to collapse
its installing now, thank you so much !!!!
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
_______________________________________________________________________________
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Thank you for posting this. I tried three other methods to get root back before this, and none of them worked. This one did the trick without any problems at all. Thanks again!
Wug's Nexus Root Toolkit 1.9.4
kyoshiro22 said:
Wug's Nexus Root Toolkit 1.9.4
Click to expand...
Click to collapse
I know there's Toolkit's out there, but this is for those who choose to take the "Fastboot" approach.
gestevez1213 said:
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP[ - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Click to expand...
Click to collapse
This is NOT working.... I tried it 3 times on 2 devices
papayayoghurt said:
This is NOT working.... I tried it 3 times on 2 devices
Click to expand...
Click to collapse
What part are you stuck at?
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
I used chainfires auto root for the N5 (stock lollipop Boot loader). Worked great. Just download to a PC put phone into boot loader and run the bat file. I can't link but a quick google will find it for you.
Sent from my Nexus 5 using Tapatalk
andrelessa said:
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
Click to expand...
Click to collapse
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Personally, I'm using the autoroot from chainfire. Works like a charm, no custom recovery is needed (I have the stock recovery).
gestevez1213 said:
What part are you stuck at?
Click to expand...
Click to collapse
Everything is working, but then SuperSU can´t find a Binary.
gestevez1213 said:
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Click to expand...
Click to collapse
Yes, I read somewhere that TWRP need this...
papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Are you running the official lollipop release? It should work with that. Delete the app, and try again.
Just put your phone in bootloader and run cf-autoroot from windows if you dont want twrp.
I have twrp but its not working like that
papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Had the same issue and needed to flash the updated kernel from chainfire : https://www.androidfilehost.com/?fid=95747613655047375
Why are you trying to do this the hard way? Just use chainfire's autoroot.
It works perfect and it's literally one command
fastboot boot CHautoroot.img (or whatever the file name is)
cf-auto-root is the way
I agree, just use cf-auto-root. You should be good to go in no time.
Just for FYI, if you already have unlocked bootloader, it won't wipe your data, if you are concerned.
CF-auto-root roots N5 without modifying your kernel. I believe, if you flash the SuperSU in TWRP, it would modify the kernel. It's nothing bad, but if you want to remain "stock" and don't want to reflash stock ROM later to get the OTA, just use "Full unroot" from SuperSU app and you are stock and ready for next OTA.
I have encrypted the storage on my Nexus 5. Will CF-Auto-Root wipe my storage?
papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
I have the same error.
Disclaimer: If you are not comfortable with using Fastboot and ADB and editing system files than this guide might not be for you. At this point this is what I have to offer.
Click here for the unofficial twrp image - Latest version as of 12/27/14
So getting right into it.
1. Turn on ADB mode on the watch by going to about and tapping the build info 7 times.
2. Download ADB and Fastboot utilties
3. Plug the watch into the computer and your phone should vibrate and ask you to accept the computers fingerprint, tick the check box to always allow and hit ok
4. Open up a command prompt or terminal inside of where the ADB utilities are located and enter
Code:
adb reboot bootloader
This next step will wipe your data!
5. Now you should be in fastboot, go ahead and on the terminal use the next code and follow prompts to unlock
Code:
fastboot oem unlock
6. Now after you re-set up your watch again you will need to do step 1 and 3 again.
Please do not skip step 6!
7. Go ahead and issue
Code:
adb reboot bootloader
8. Flash unofficial twrp, make sure the recovery image file is in the same location as fastboot than issue
Code:
fastboot flash recovery YOURIMGNAMEHERE.img
9. Upon successfully doing that you should have twrp installed
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB use the proper name of what you downloaded. Issue
Code:
adb push SUPERSUNAMEHERE.zip /sdcard/
11. Issue
Code:
adb reboot recovery
12. than using the very tiny TWRP and somewhat messed up go ahead and use it to install the supersu.zip under the folder /sdcard
13. Enjoy root and twrp.
I will make this guide into a much easier Java program in the very near future to make it easier to use.
This was typed up pretty fast and it is kinda hacky, I will work on a bat script and a shell script if we have enough osx users here. I'm sure someone will come along and make this better if I don't get around to it.
Credits:
Dees-Troy for his TWRP support for dory our fish brother device which worked on our device
Chainfire for all his hard work these many years
Q: ADB complains there is no device listed.
A: Install universal ADB drivers and then go to device manager and under the device with a yellow warning icon go to update driver, Browse my computer, let me pick from list of device drivers, than Google ADB interface. If it still complains turn off debugging, than turn it back on, revoke authorization, then disable and re-enable again.
One more just in case.
Great work!!
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
hatefuel19 said:
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
Click to expand...
Click to collapse
The latest supersu is version 2.36 dated 11.27.2014. 1.94 is well over a year old, you need to update for sure that is why you are force closing.
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
hatefuel19 said:
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
Click to expand...
Click to collapse
I'm here to help! I'm working on adding other mods to my other thread right now I'm working on getting busybox working.
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
---------- Post added at 09:31 PM ---------- Previous post was at 09:28 PM ----------
jimmydigital00 said:
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
Click to expand...
Click to collapse
Disregard I did it again and for some reason it worked. Maybe I need to reboot first.
Recovery
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
adamrobles said:
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
Click to expand...
Click to collapse
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
reflashed
tonu42 said:
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
adamrobles said:
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
Click to expand...
Click to collapse
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
Thank you for that information, I stopped the download of the dump.
Downloading the stock recovery now.
---------- Post added at 02:24 PM ---------- Previous post was at 02:10 PM ----------
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
I must have skipped a step...
installed stock recovery
booted into the watch system
enabled adb debugging
reboot to bootloader
install your recovery image
rebooted
pushed supersu
rebooted to twrp
installed supersu
rebooted to system
adb shell - verified root!
You are awesome! Thank you for taking the time to help me!
HYPE for 5.0.1
'm Hype! can't wait to flash the first 5.0.1 system dump on this as stated by +Darek Ross we MAY be receiving update as early as today!
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
zvieratko said:
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
Click to expand...
Click to collapse
My guide is setup like the one you put there. In order to get adb working again you need to re setup the watch step 6. Read the instructions carefully. I'll post a batch script later to simplify this.
Sent from my A0001 using XDA Free mobile app
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
zvieratko said:
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
Click to expand...
Click to collapse
By default debugging is disabled, I'm not sure how you were able to issue an ADB command on step 7 with out first performing step 6.
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
zvieratko said:
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
Click to expand...
Click to collapse
Ah I see, yea the guide is written as the absolute minimum to work right now. Like I said later today I'll try to post a script that automates all of this, its much easier.
Okay so I got my oneplus 3t today and I updated it to Nougat via the ota file all good so far. I then decided that I wanted to install a custom rom so I downloaded twrp supersu etc everything needed to root and install the rom. Here's where it went wrong in knowingly I downloaded the wrong twrp flashed it and it would just hang at the flash screen for twrp. Anyway after hours of trying to install a recovery I managed to get a stock one to semi work, now it turns out I don't know how I did it but my phone won't even boot it just turns on and goes straight to fastboot mode. I managed to get a stock recovery semi working but it won't let me install the stock rom from internal storage and I've tried updating through adb and it will hang at a random percentage for a good 20 mins and then just fail. Really need some help here it would be great, thanks
Hi,
If you can get into fastboot mode then the best recourse is through there. Hope you properly OEM unlocked your device.
First of all, you MUST have the latest adb/fastboot binaries and FOR SURE have the correct drivers.
Follow the links on this XDA article to download the latest adb and fastboot binaries: https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads
This is the link for the Windows binary: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Extract all the contents of the zip file in a folder on your PC.
Then, also make sure to have THE CORRECT twrp, 3.0.2.0 or 3.0.3.0. This is the link but currently it is down: https://twrp.me/devices/oneplus3t.html
Download THE IMAGE, NOT FLASHABLE ZIP and put it in the same folder as the android platform tools above.
Finally, download the latest complete 3T firmware from OnePlus from this link: http://downloads.oneplus.net/devices/oneplus-3t/
I STRONGLY recommend not to use an update zip, even a full ROM update zip as that one might not include certain firmware images.
Put THE ZIP on the same folder as the others, DO NOT EXTRACT ANYTHING.
On your PC, open a command prompt in the folder where you extracted the android platform tools and run the following: fastboot boot twrp-3.0.3-0-oneplus3t.img (assuming you downloaded the 3.0.3 version of twrp).
Your phone will TEMPORARILY accept the twrp recovery as a boot image and boot from there. NOTHING IS BEING PERMANENTLY WRITTEN AT THIS TIME.
After that, enter TWRP's Wipe menu and wipe system, data and cache.
Finally, use TWRP's Advanced menu and enter adb sideload mode. Once there slide that slider to the right to enable adb mode and return to your PC and enter the following command in the command prompt:
adb sideload OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161d2b234949.zip (assuming you downloaded the 3.5.4 binary from OnePlus).
TWRP should properly flash the OnePlus ROM and hopefully, return you to proper function. You can then update back to Nougat.
Hope that helped!
Yeah that sorted it thanks a lot
Use the emergency tool for OP3T and start from scratch:
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
@KeyperOS
I'm trying to follow this guide, but did you miss something out here?
On your PC, open a command prompt in the folder where you extracted the android platform tools and run the following: fastboot boot twrp-3.0.3-0-oneplus3t.img (assuming you downloaded the 3.0.3 version of twrp).
Your phone will TEMPORARILY accept the twrp recovery as a boot image and boot from there. NOTHING IS BEING PERMANENTLY WRITTEN AT THIS TIME.
Click to expand...
Click to collapse
Once I do "fastboot boot twrp" and get a success, then what?
Do I need to somehow reboot the phone into TWRP - because that didn't happen on its own.
If so, how do I do this?
Thanks,
jackmacbunton said:
Yeah that sorted it thanks a lot
Click to expand...
Click to collapse
Glad that sorted it out
PugRallye said:
@KeyperOSI'm trying to follow this guide, but did you miss something out here?
Once I do "fastboot boot twrp" and get a success, then what? Do I need to somehow reboot the phone into TWRP - because that didn't happen on its own. If so, how do I do this? Thanks,
Click to expand...
Click to collapse
My instructions while detailed are not step-by-step. I expect the person reading them to have their PC configured correctly and at least a vague idea of what they're doing.
So, assuming you put the correct TWRP image (my command uses the name of the image for TWRP 3.0.3.0, you MUST alter it to reflect the actual image's filename if it's not that) on the same folder as the fastboot binary then yeah, the command
fastboot boot twrp-3.0.3-0-oneplus3t.img
should have made your phone reboot and enter into the TWRP image that you had on your PC.
If it didn't then you did sth else wrong before that.
Either you didn't OEM unlock your phone when you still could or you didn't use the android platform tools that I linked or you don't have the correct ADB drivers installed on your PC.
Start from there.
Hope that helped!
Thanks for your help @KeyperOS - I know where I went wrong...
To save some time, when I tried to reboot into TWRP, I typed "fastboot boot " then I dragged and dropped the TWRP img file onto that line in the cmd window (rather than typing the filename manually) - when you do that, it appears to include the full path to the img - it was that that was causing the problem.
When I typed the TWRP filename manually, it worked.
The only thing that caught me out was after I'd installed the ROM (via adb sideload) I tried to reboot the device from TWRP recovery - this seemed to just hang. In the end I just powered off the phone using the power key, then powered it back up as per usual.
Checked that the phone booted to the first of the setup screens, then powered off/booted into fastboot mode, relocked the bootloader and it seems to be OK.
I'm now back on 3.5.4 again, which was what I was trying to do...
4.0.0/1 had felt a bit laggy, and I'd sensed some issues with wifi and BT, I can now run 3.5.4 and see how it compares - was I just imagining it?
Thanks again for the guide and your help - I really appreciated it
@PugRallye
Windows' command prompt has an autocomplete feature. If you want it to add the name of a file, type a couple letters and then present TAB, it's gonna complete the filename itself and if it's the wrong file you can keep tapping tab to cycle through all the options.
Really glad it worked out Btw [emoji4]
In my experience, 3.5.4 was great but 4.0 is a step up in both battery life, which IME is amazing and features, with it I almost didn't need root and certainly don't need xposed which was a first.