I did a restore with JB on my p1010 from the android development forum
now my tab has got a logo that's like (mobile phone..triangle..computer)
wont go into recovery or download mode just that logo keeps on popping up
aint got a back up but have a ROM on my SD card but cant get into recovery
please help
thanks in advanced
Hi,
If you can see the triangle it is not bricked.
Just flash the safe GB rom using odin, and you can start again.
Regards
In my desire c when I go to install custom ROM it boots into recovery and instantly an error comes showing a phone with an exclamation mark.
Please help . Then I seen somewhere what to do after that I pressed up volume key and then power button , then an error came E:not found /system/cache/recovery/ . Then i went to install zip from sd card , it says , "error invalid keyword , rebooting success " and then phone turns on .
But I wanna install http://forum.xda-developers.com/showthread.php?t=2190799
this is revolution mod v3.3.
Please help me !!!!
Have you installed a custom recovery? Clockwork mod or twrp?
The red exclamation warning usually occurs with stock recovery.
Here's a link for twrp recovery: http://forum.xda-developers.com/showthread.php?p=37985010
And link for clockwork mod recovery: http://forum.xda-developers.com/showthread.php?p=40196574
Sent from my HTC One X
@intel007
Thanks for help dude. But I just again tried with Hasoon's 2000 toolkit by extracting in to c drive and it flashed the Recovery , 2ndly I have got some Modwin Recovery which was placed in the data folder of the toolkit.
and I would be happy if u help me in flashing the awesome ReVoLuTioN Mod v3.3 . I want a working wi-fi but I am not able to understand the steps.
and for ur reply:good:
Maybe this article can help you http://forum.xda-developers.com/showthread.php?t=1947613
@
Thanks a lot , this guide helped.:good::good::good:
Hello.
I have Bought Xolo A500S before 2 Weeks.
Everything was Perfect and in well manner.
I have tried to install chainfire 3d on it. A dumb step cos it doesn't support Jellybean.
My Phone hanged at Boot logo. The Device Gone into softbrick.
However, I found Stock Rom to Flash over my Phone. I flashed Stock Rom of Xolo A500S but then It gone into Hard Brick. It doesnt even boot up and show logo.
I found a thread somwhere over XDA that I can install ROM that is similar to my Phone Specs.
I searched around Net and Found that Xolo A500L have same Specs but camera.
I Flashed Xolo A500L Rom on my Xolo A500S.
Voila, It started like charm.
Then, I tried to Flash my Xolo A500S Rom back but without Preloader.bin as I thought it was causing Problem.
So I Flashed it using SP Flash tool and deselected Preloader.bin, and Flashed it.
And My Device Started Working again.
So, The Current state is My Xolo A500S have Preloader.bin of Xolo A500L but everything else is of my Phone.
The Only Problem I facing is The Bluetooth, Gps, Wifi, FM Radio doesn't working after The Phone started.
Looks Like everything that is Controlled Wirelessly that Doesn't working.
When I click on Wifi or Bluetooth to Start, It slides to On Stage, But in second it Returns back to Off stage.
Please Help Guys, I want my Bluetooth, GPS, WIFi, FM Back.
Thx In Advance,
DKill
Baseband
I found that there is mismatch of baseband and my RIL, Can you please help out to find my matchig RIl and Baseband?
It will be very helpful.
Please Provide modem.zip file for my Phone. It will workout too.
Update
I have Installed Stock ROM back and Everything started working but not as I wanted.
The Phone hangs at boot logo, BUT BUT BUT,
The Wifi, GPS, Bluetooth, Radio works when tested on Factory mode.
Now Everything is working but phone isn't starting.
Any Suggestion?
If I Factory Reset from Recovery Menu, Phone does start but all 4 features listed above stops working.
Help Needed. I am new to Android.
I guess something is wrong with /data /cache.
What do you think?
Please Advice something how I can fix it?
Please...
Fixed
Problem got fixed by Hard Reset.
DKillWorld said:
Problem got fixed by Hard Reset.
Click to expand...
Click to collapse
how to make hard reset ??please help even im facing same problems like wifi,bluetooth,gps n radio ...please help
rak1610 said:
how to make hard reset ??please help even im facing same problems like wifi,bluetooth,gps n radio ...please help
Click to expand...
Click to collapse
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
plz upload userdata xxxxx backup
wifi blutooth not working
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
after flashing through cwm my wifi and blutooth is not working, even there's problem in factory board test.
what to do??
will your userdata file can help?
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
broo pls upload that userdata backup for me pls ...
I will b very helpful if u do it for me ...
DKillWorld said:
Hello.
I have Bought Xolo A500S before 2 Weeks.
Everything was Perfect and in well manner.
I have tried to install chainfire 3d on it. A dumb step cos it doesn't support Jellybean.
My Phone hanged at Boot logo. The Device Gone into softbrick.
However, I found Stock Rom to Flash over my Phone. I flashed Stock Rom of Xolo A500S but then It gone into Hard Brick. It doesnt even boot up and show logo.
I found a thread somwhere over XDA that I can install ROM that is similar to my Phone Specs.
I searched around Net and Found that Xolo A500L have same Specs but camera.
I Flashed Xolo A500L Rom on my Xolo A500S.
Voila, It started like charm.
Then, I tried to Flash my Xolo A500S Rom back but without Preloader.bin as I thought it was causing Problem.
So I Flashed it using SP Flash tool and deselected Preloader.bin, and Flashed it.
And My Device Started Working again.
So, The Current state is My Xolo A500S have Preloader.bin of Xolo A500L but everything else is of my Phone.
The Only Problem I facing is The Bluetooth, Gps, Wifi, FM Radio doesn't working after The Phone started.
Looks Like everything that is Controlled Wirelessly that Doesn't working.
When I click on Wifi or Bluetooth to Start, It slides to On Stage, But in second it Returns back to Off stage.
Please Help Guys, I want my Bluetooth, GPS, WIFi, FM Back.
Thx In Advance,
DKill
Click to expand...
Click to collapse
how did you flashed???? the rom when phone wasent booting up????
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
upload backup file plzzzz :crying:
Upload userdata_XXXX_XXX.backup file
Please update below file file because my phone bluetooth and wifi is not working.....I am waiting for your reply.....
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
Shahed.RedaArKZ said:
broo pls upload that userdata backup for me pls ...
I will b very helpful if u do it for me ...
Click to expand...
Click to collapse
Ihave flashed oppo colors os in my xolo a500s. but now wifi and bluetooth are working.
when i turn on the wifi, it gets turned of within a second.
pls help me out.
hi friends,
A few days back i rooted my xolo a500s ips using framaroot and also installed supersu.I wanted to upgrade my android phone to lollipop so i downloaded update zip from this Download Link-https://iop.li/UTw and update zip is Android_l_v2.5_NonIPS_Pranav.zip (231M)
since i had to download cwm recovery,i downloaded recovery.img and flashed it using flashify app(got it through playstore),
cwm got installed successfully.then i booted my phone using cwm and choose to install update zip.Now it says that update is complete.then i tried to reboot but it switches on and off.xolo logo(boot logo)appears for few seconds and disappears.this continued for half a day but did not boot completely.
Now what should i do?i am dead without phone
Hello Friends,
I have xolo a500s phone. few days back the software of phone is not working and it just shows logo. I cant event switch it off. To do so i have to remove a battery. Then i tried to update to rom from SPFTools , but when i had updated it. It got stuck in downloading window.
After that the phone is not even turing on. even after pressing a power button for longer time. According to the service centers the mobile will not start again.
But when i connect the phone to PC it got detected and all MTK driver get installed.
So can you please help. what i do with it.
Is phone is completely dead? it wont start again.?
Please Help...
Thanking you in advance.
Hi there,
Please read and ask in one of this threads:
[INDEX] ALL ABOUT XOLO A500s PHONE
or
[Guide] Xolo A500S : ROOTING, ROMES ,CWM & STOCK RECOVERY,SAFE & FACTORY MODE
Good luck
i recently rooted Samsung s plus i9001 and installed TWRP recovery.. Then flashed CM12 lollipop OS to it sung twrp from sdcard.. On first boot it showed Encryption unsuccessful and reset button was given.. after clicking on reset button it never booted up just stuck in Teamwin flashing screen.. even device in not recognized in PC for odion..
XDA Visitor said:
i recently rooted Samsung s plus i9001 and installed TWRP recovery.. Then flashed CM12 lollipop OS to it sung twrp from sdcard.. On first boot it showed Encryption unsuccessful and reset button was given.. after clicking on reset button it never booted up just stuck in Teamwin flashing screen.. even device in not recognized in PC for odion..
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
I am connecting this thread to the forum your device experts can be found:
> Samsung Galaxy S I9000 > Galaxy S I9000 Q&A, Help & Troubleshooting
Please note, to respond to replies, you will need to register for an XDA account.
Hope this helps, and good luck!
Guys i have S Plus i9001. i just factory restored the custom rom 5.1.1 now phone is stuck in recory loop of twrp recovery. i tried connected to odin but in download mode it says. unrecognized device. but my vibrant T959 in connecting to same odin using same cable in download mode. i tried almost every thing on internet but no progress. reinstall drivers. even all drivers of computer. updated them. tried three cables and two versions of odin.
P.S: Odin is detecting it in RAMDUMP mode.