Incompetence has indeed been displayed. Issue was unrelated to Xposted: Twilight overlay (screen filter for eye strain at night) was conflicting with apk installer.
-----
Disclaimer: I am new here and may display incompetence.
Since updating to version 2.6.1 today, I have been unable to install modules (or re-install the old framework). Downloading works fine, unknown sources is enabled, but upon tapping install I am unable to proceed past the permissions list page; tapping "Install" in the bottom right does nothing. The cancel button works fine.
Disabling all modules and rebooting did not solve the problem. Might this be related to the "UI Improvements" in 2.6.1? Is it some other issue?
If it is a UI issue, what would be the best course of action here other than a backup restore (seems like overkill) seeing as I am unable to tap install to downgrade to 2.6?
Running Sense 5 based 4.2.2 ROM on an HTC One X+
Thanks!
Related
I've Samsung galaxy note 2. Updated to 4.4.2. Rooted. Response screen of root checker attached for reference.
When I try to install the framework on clicking the apk file, the installer starts and shows the warning messages. However, the install button at the bottom does not click - seems to be disabled. The cancel button cancels the process. Screen shot is attached for reference.
I've enabled unknown sources under security. I've tried with stopping and disabling the anti virus programmes - Avast and AVG.
What am I missing?
Thanks,
Vikas Garud.
vdgarud said:
I've Samsung galaxy note 2. Updated to 4.4.2. Rooted. Response screen of root checker attached for reference.
When I try to install the framework on clicking the apk file, the installer starts and shows the warning messages. However, the install button at the bottom does not click - seems to be disabled. The cancel button cancels the process. Screen shot is attached for reference.
I've enabled unknown sources under security. I've tried with stopping and disabling the anti virus programmes - Avast and AVG.
What am I missing?
Thanks,
Vikas Garud.
Click to expand...
Click to collapse
the problem is not for framework installer but an App that control screen display.
solution is kill any App with a simple task manager before launch installation Apk.
it's tested, I have a note2
Which app?
Thanks fixfast.
I'm pretty sure that the framework works on Note 2!
Where should I start looking for "Apps that control the screen"? Don't all Apps control screen in some manner?
I may be wrong, but I doubt if its an app controlling screen is causing the problem. Only the "Install" button is disabled, the "Cancel" button is working fine. So installation of the apk is disabled, even though I've enabled unknown sources under security.
I've taken this question to general Note 2 help thread as I realised that this problem is only not with Xposed installer apk, but other apk's as well. I don't know when this behaviour started as I have installed apk's in the past.
Any pointers on how to proceed?
Thanks,
Vikas Garud
SOLVED
Thanks everybody. "Copy Bubble" APP was the culprit. After disabling it, the install button was enabled.
Incidentally, I searched for "Screen Filter" in play store. This APP was not in the search results.
Vikas Garud
Installation Issue on Note 2
Gents,
I've another issue installing Xposed by its installer.
I have a galaxy note 2 (GT-N7100) rooted (Super Su Free version), with TWRP recovery.
After running the installer the attached message appeared.
I tried to change the permissions of the /systme/bin manually by root explorer but failed.
Would appreciate your support.
Up!
Gents,
How could I install a recovery .zip version of Xposed Framework 2.6.1 ?
Can someone help me plz.
Pulling my hair on this one; I have rooted the tab successfully, flashed cAndroid 5.01 and it runs great, but won't accept any of the dozen version of Gapps (GPS stop, AOSP keyboard fail, Play Store Hangs, etc.) I have tried, so I thought, let's just try AOSP or cAndroid Nougat, which I have successfully flashed to my Nexus 7 2012 (note re-purpose addiction). Various sideloaded apks work with no issue on the 5.0 ROM, no google apps or services.
I am running CW Mod for flashing and SR5-SuperSU 2.8 for root and the AOSP Rom exits with Status 0, and the cAndroid exits with Status 7, and I am hesitant to edit the install script. Rootcheck show device rooted successfully.
Any help with either would be appreciated, ultimate goal is getting Onenote to run, again, which I have done for both 5.x and 7.x on nexus, using old APKs
Upate your Recovery to the TWRP Version >= 2.8.7.0..
Do you have a link for the twrp build for the gt-p7310, can't find it listed under twrp supported devices
thanks
Searched with every criteria I can come up with, can't find a .zip for GT-P7310 or p5wifi for >2.7
SOLVED
Found right copy of TWRP, installed and now running Nougat on the tab, thanks for the assist
Spoke to soon , update to 7.1.2 goes fine, but no keyboard works none of them will activate when a text field is tapped
You can actives the keyboard under setting, language and inputs , vituelle keyboards
Thanks for the update ; I have the device working properly now with 7.1.2 AOSP thanks to updating my TWRM ; everything works but anything Google or Microsoft - I have tried every version of GApps Zips, APKs GPS back to 10.0.8, Gmail, Play, Gboard, etc. and everytime I introduce anything Google , it flakes out, get service stopped messages from Play Services, Gboard stops, etc. Oddly enough GHandwriting works which i use alot on m other tabs with Onenote, which also won't run, I am assuming b c of GPS; Onenote installs passively, but errors out 8000400 evertime, which seems to be some kind of sign in error, but TS steps I have found have not worked. OTher than the Google and MS snafus, device runs better than ever and i am resolved to using Evernote and exporting over to one note when i need to, any ideas would be appreciated , I like the size of this device and hate to trash anything useful - Thanks for the reply
DESCRIPTION
If you have the Pixel Experience module installed on your phone and installed Google Phone from the Play Store or ever tried to use a patched Google Phone version (such as this one), you may have noticed that Google Phone force closes when you try to search for a contact or while opening the keypad. This Magisk module attempts to fix that and it works by replacing your non-AOSP contacts storage with Google's own version, the one supported by Google Phone.
IMPORTANT NOTES
Supports Android versions from Android 7 (Nougat) to Android P.
It will remove any phone/dialer/contacts/people applications from your phone (if supported) because they are incompatible with Google's Contacts Storage.
You should only install this module if you want/need to use Google Phone and Google Contacts.
TESTED/SUPPORTED DEVICES
HTC 10 (Sense based ROMs).
Note: It should work with other devices but I have no means no test them myself, I can only rely on the community to test this for me.
SPECIAL INSTRUCTIONS
Install the Magisk module as usual but DO NOT reboot your device just yet.
Go into "Settings » Accounts & Sync" and disable "Automatically sync data".
Go into "Settings » Apps" a, look for "Contacts Storage" (it's a system app) and clear application data.
Reboot your device now!
Go into "Settings » Accounts & Sync" and enable "Automatically sync data".
Google Phone should now work without force closing, hopefully.
Note: If you ever want/need to disable this module, you should also follow the procedure above (disable module, disable data synchronization, clear contacts storage data, reboot, and re-enable contacts synchronization).
DISCLAIMER
Install this module at your own risk.
Developer is not responsible for what you do on your device.
Please take all necessary precautions (like a nandroid backup) before installing this module.
DOWNLOADS
Google-Contacts-Storage-v0.0.0-TESTING.4.zip
XDA:DevDB Information
Google Contacts Storage, Tool/Utility for the XDA Community Apps
Contributors
rfgamaral
Version Information
Status: Testing
Current Beta Version: v0.0.0-TESTING.4
Beta Release Date: 2018-08-02
Created 2018-08-01
Last Updated 2018-08-02
@rfgamaral after installing magisk module and rebooting i keep getting android.process.acore has stopped.
I cannot get rid of it. By pressing ok all the time i managed to arrive to Apps but there is no Contact Storage app to clear data/cache after the reboot.
stathis95194 said:
@rfgamaral after installing magisk module and rebooting i keep getting android.process.acore has stopped.
I cannot get rid of it. By pressing ok all the time i managed to arrive to Apps but there is no Contact Storage app to clear data/cache after the reboot.
Click to expand...
Click to collapse
I also got that error when developing this module but I never got it after installing/enabling it, only after disabling it.
For some reason, the system does not recognize the /system/priv-app/ContactsProvider/ContactsProvider.apk (although the file is there). I'm not sure how to fix this to be honest, so I recommend you restore your backup to get you back to a working state. Maybe try the whole process again (makre sure you follow every single step) and instead of rebooting the system after installing the module, reboot to recovery and wipe dalvik/ART and cache. If that doesn't help, restore the device again until a solution for this problem is found.
Like I said, I also had this problem and because I live on the edge, I didn't make a backup of my system (idiot me). I had to make the system recognize the ContactsProvider.apk file and wen into recovery, deleted, copied it back from my ROM, set proper folder/file permissions, wiped dalvik/ART and cache and rebooted, the problem was gone. I installed my module again and it worked. But I'm honestly afraid to disable it and get that error back.
Which is weird because I'm replacing this file systemlessly, that's the whole point of Magisk. Maybe I'm doing something wrong, I'm no expert... We'll probably need help from someone with more knowledge on the whole Android system. But for the record, I currently have the version available on this thread installed on my phone. I have the Pixel Experience module installed and installed Google Phone from the store, it doesn't force close and all features seem to be working. I just need to get this module stable.
@stathis95194 Were you able to restore your device? I hope so... I've uploaded a new test version, didn't change much, not sure if it fixes anything.
rfgamaral said:
@stathis95194 Were you able to restore your device? I hope so... I've uploaded a new test version, didn't change much, not sure if it fixes anything.
Click to expand...
Click to collapse
Yeap I always take a nandroid before messing with the phone. Let me try the new version and report
Sent from my HTC 10 using Tapatalk
@rfgamaral soooo after flashing 0.0.4 i faced the same issue with android.process.acore has stopped popping all the time.
This time i took a different approach and didn't restore my nandroid. Instead i dirty flashed my LeeDroid rom.
Rebooted and lo and behold, stock dialer and contacts were missing and google phone was working perfectly. No crashing on searching (nearby places is working)
Now i need to test caller id and spam filter
I will keep testing and let you know.
stathis95194 said:
@rfgamaral soooo after flashing 0.0.4 i faced the same issue with android.process.acore has stopped popping all the time.
This time i took a different approach and didn't restore my nandroid. Instead i dirty flashed my LeeDroid rom.
Rebooted and lo and behold, stock dialer and contacts were missing and google phone was working perfectly. No crashing on searching (nearby places is working)
Now i need to test caller id and spam filter
I will keep testing and let you know.
Click to expand...
Click to collapse
Awesome, glad you got it working.
Now I just need to understand why installing this module crashes android.process.acore... But it's a bummer that this is happening, a little price to pay, I guess? At least until a fix is found... That and that whole install procedure which is required to avoid other different crashes because of incompatible storages.
Hi
I'm running 2.42.400.3 on U11.
I installed this and google phone from
https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Dialer kept crashing so I installed your mod.
After that,com.android .phone keeps crashing.
I unistalled it and then I got acore crashing.
I restored feom nandroid but for some reason kept getting the acore crash, so I completely uninstalled magisk.
Now.... everything works. Even the dialer.
I'm really not sure what happened but.... thanks
gunnerhk said:
Hi
I'm running 2.42.400.3 on U11.
I installed this and google phone from
https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Dialer kept crashing so I installed your mod.
After that,com.android .phone keeps crashing.
I unistalled it and then I got acore crashing.
I restored feom nandroid but for some reason kept getting the acore crash, so I completely uninstalled magisk.
Now.... everything works. Even the dialer.
I'm really not sure what happened but.... thanks
Click to expand...
Click to collapse
That's really weird, on so many levels... :/
Screenshot as proof :laugh:
Hi, first time posting to XDA and I'll try to be concise, but I am tremendously confused and quite frightful of having to reflash/factory reset my entire device.
I got Magisk 6.1.0(165) after my Xposed Framework became more of a problem than a solution a long time ago, with a basic desire of rooting my device to control what apps boot at launch and examine Wakelocks and run an ad blocker.
For a long time, I did not update after the headache of clearing Safetynet and getting things functional.
Magisk prompted me to update, and I decided to after I had installed a few new apps that I now wanted to block from running on boot, but I never got around to finding a method to prevent apps from loading at startup like I desired with Xposed, i previously just disabled or uninstalled the problematic apps.
Before updating, I used TWRP to run a backup and rebooted.
After the update, Magisk informed me that the latest version i had updated to, was not supported and that it would behave asif it wasn't installed at all... Great...
I downloaded the zip to my device's SD card, and after a reboot noticed that I had Two installs of Magisk. When I held the icon to view app info, one of them would behave as I expected, and the other would show me additional options like modules, downloads, superuser and hide.
When I opened the second copy of Magisk, the first one vanished from my applications tray and cannot be found anymore, and Magisk now shows it's green checkmark next to Latest Version v20.4 and Installed Version 17.1 but Safetynet gives me an API error.
Clicking Update Magisk Manager from the menu offers to install v7.5.1(267) but I am wary enough that I am unsure if I should proceed and am not even sure if Magisk has a module that I am looking for-- Something to control what apps launch on startup.
Will updating Magisk Manager show a new list of additional modules to be downloaded and perhaps something that I am looking for? Should I be worried about bootlooping my device and needing to reset it?
I once used the Boot Manager found on the Xposed Framework, but it's long since become non-functional and became the reason why I simply uninstalled what was bothering me, but now I want to keep the new applications that I have and disable their bootup on start.
Is Magisk the place that I should be looking for such a feature?
Running a Samsung GalaxyS5.
Has anyone managed to update or replace the system Webview? I am trying to use the home assistant Wallpanel app and it works fine except custom cards fail to function, all the info I've found so far lead me to believe it's to do with the webview, maybe because it's V74 and I need a newer one, I've not managed to download one that will install, the latest one fails to install, and I've tried installing an older one (89.0.4389.86) which said it installed but checking in dev options it's still showing V74.
Anyone have any ideas?
The easiest way would be to root your device and use a Magisk Module like the Webview Manager I have attached here.
The other method is to try to change/update your framework.apk but that's really hard to do (especially with the newer android versions) without causing a bootloop.
I've been looking but not found a way to root the device yet, might just work around the limitations of the webview issue