Roms built using the ArchiDroid Optimisations
Disclaimer:- I am not responsible for anything that you do to your device by flashing my zips, i provide them as-is, anything you do is your risk and i take no responsibility, by downloading the zips you agree to this statement.
For those who do not know what the optimisations are it is just a commit that intends to increase the performance of a ROM by using different optimisations at code level, more information on that can be found Here It boasts a supposed increase in performance by up to 6x.
Click to expand...
Click to collapse
I'll be building updates when i have the time too (make a request if you want a certain ROM added) The builds will be much larger then the normal versions as they are odex'd etc. I am using the Unofficial P880-Dev sources only unless specified otherwise and using 4.8-sm to build the Rom, and 4.7-sm to build the kernel.
Click to expand...
Click to collapse
Downloads (Can make mirrors available on request)
LiquidSmooth
Code:
[url]https://s.basketbuild.com/devs/Absol/Liquid%20Smooth%20-%20AD/[/url]
PacMan
Code:
[url]https://s.basketbuild.com/devs/Absol/PacMan%20Rom%20-%20AD/[/url]
Paranoid Android (AOSPA-Legacy)
Code:
[url]https://s.basketbuild.com/devs/Absol/Paranoid%20Android%20-%20AD/[/url]
Omni-Rom
Code:
[url]https://s.basketbuild.com/devs/Absol/Omni%20Rom%20-%20AD/[/url]
CyanogenMod 11.0
Code:
[url]https://s.basketbuild.com/devs/Absol/CyanogenMod%2011.0%20-%20AD/[/url]
Official Sources - Pending
CarbonRom
Code:
[url]https://s.basketbuild.com/devs/Absol/Carbon%20Rom%20-%20AD/[/url]
NamelessRom
Code:
Pending
Team Win Recovery 2.7.1.0 MultiRom & Normal
Code:
[url]https://s.basketbuild.com/devs/Absol/Team%20Win%20Recovery%20Project/[/url]
http://forum.xda-developers.com/showthread.php?t=2754997 - OT of Commit
https://github.com/P880-dev/android_kernel_lge_x3 - Kernel Source
https://github.com/P880-dev/ - All Sources
Click to expand...
Click to collapse
Hid3away said:
Roms built using the ArchiDroid OptimisationsDownloads (Can make mirrors available on request)
LiquidSmooth
Code:
[url]https://s.basketbuild.com/devs/Absol/LiquidSmooth-AD/[/url]
Click to expand...
Click to collapse
Is the ROM of this post is no longer valid?
I downloaded yesterday. However, there is now a file to download.
ze7zez said:
Is the ROM of this post is no longer valid?
I downloaded yesterday. However, there is now a file to download.
Click to expand...
Click to collapse
That's still fine, it's just the next one is more up-to-date and odex'd.
The build from yesterday was not odex'd.
Sorry for the inconvenience..
Sooo just read arch's post about this improovements and i am interested in testing this builds (liquid is my personal pick),however i am also interested in how did u build it since on his thread i read that there is 2 versions O2 and O3 so witch one did u use.Is there any stability issues or any other rom problems when u build it this way ?
BTW thank you for your effort to bring us this
dimi89 said:
Sooo just read arch's post about this improovements and i am interested in testing this builds (liquid is my personal pick),however i am also interested in how did u build it since on his thread i read that there is 2 versions O2 and O3 so witch one did u use.Is there any stability issues or any other rom problems when u build it this way ?
BTW thank you for your effort to bring us this
Click to expand...
Click to collapse
I used O3 optimisations
EDIT: CM-11 build is up with the ArchiDroid Optimisations, -O3 and 4.8-sm Rom and 4.7-sm Kernel
root apps could not get root permission on your cm11 rom
~MaX~ said:
root apps could not get root permission on your cm11 rom
Click to expand...
Click to collapse
Have you tried flashing a SU zip? Setting root perms to Apps and ADB? Setting auto response to Allow?installing SuperSU from playstore and using that to install/manage root? Google'd the problem to see if other devices had that issue? Did you try clean flashing? Did you try a custom kernel?
no?
Anyways, Omni is built Gonna build TWRP 2.7.1 whilst i have it synced anyways.. Don't know if Adam has or not already, links in OP for OmniRom.
Could you please try to build an AD cm11 official version?
Sent from my LG-P880 using XDA Free mobile app
:good: Downloading OMNI
KrisJoe said:
Could you please try to build an AD cm11 official version?
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah sure thing guys, let me finish with initial PA and PAC, and then i will be able to build it! In the meantime, I built TWRP 2.7.1.0 both normal and MultiRom versions, but i'm not too sure if @Adam77Root is okay with me releasing those as he has the main thread kind of thing? I'll add to OP thou anyways but if you want me to remove i will ASAP!!
PA (AOSPA-LEGACY) is sync'd and building now thou
Normal AOSPA, like pure PA builds, but it has camera and Audio Issues /: Not sure which adds and removes i need, i followed the tutorial but it's outdated i think?
Hid3away said:
I used O3 optimisations
EDIT: CM-11 build is up with the ArchiDroid Optimisations, -O3 and 4.8-sm Rom and 4.7-sm Kernel
Click to expand...
Click to collapse
From JustArchi
"... O3 enables all O2 optimizations and some extra optimizations that like to increase code size and may, or may not, increase performance. ..."
So... increase performance or not? Did you test if it actually improve performance?
devilozzo said:
From JustArchi
"... O3 enables all O2 optimizations and some extra optimizations that like to increase code size and may, or may not, increase performance. ..."
So... increase performance or not? Did you test if it actually improve performance?
Click to expand...
Click to collapse
The thread has [TESTING] in the title for a reason
In all honesty, i can't tell if it does make a difference, but it's all down to the feel of the ROM...
O3 makes file bigger with chance of increased performance
O2 makes file smaller with chance or worse performance.
O3 is clear choice.
It's testing phase, you tell me if it's faster or slower
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Kanad said:
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
Try using this app. Very usefull in your case.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Sent from my LG-P880 using XDA Premium 4 mobile app
---------- Post added at 05:10 PM ---------- Previous post was at 05:01 PM ----------
Twrp 2.7.1.0 works.
Sent from my LG-P880 using XDA Premium 4 mobile app
Kanad said:
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
No i can't be bothered haha
there is a great free Root app called Flashify hat allows flashing .img files on the device, search it up on the playstore, works with boot and recovery images, and it's working perfect on our p880
Here's the link if your still too lazy to search it up on play
https://play.google.com/store/apps/details?id=com.cgollner.flashify
Can you add Carbon ROM, please ?
SpyKnife said:
Can you add Carbon ROM, please ?
Click to expand...
Click to collapse
Of Course i can mate, it's in the queue now, once PA's finished, it's gonna be Pac-Man, and then it's CyanogenMod Official, and then it will be Carbon for you mate
for those who want to install recovery without pc you can always use terminal emulator:
rename your image to TWRP_2.7.1.0.img and have it placed in Download folder
su
cat /sdcard/Download/TWRP_2.7.1.0.img >/dev/block/mmcblk0p1
sync
EDIT: Forgot the one in the end.
Should be fine now, sorry.
Sent from my LG-P880 using XDA Premium 4 mobile app
Hid3away said:
Yeah sure thing guys, let me finish with initial PA and PAC, and then i will be able to build it! In the meantime, I built TWRP 2.7.1.0 both normal and MultiRom versions, but i'm not too sure if @Adam77Root is okay with me releasing those as he has the main thread kind of thing? I'll add to OP thou anyways but if you want me to remove i will ASAP!!
Click to expand...
Click to collapse
Sure, I'm perfectly fine with it. Keep up the good work!
Adam77Root said:
Sure, I'm perfectly fine with it. Keep up the good work!
Click to expand...
Click to collapse
Thankyou!
Also, PA is now built and uploaded! 400MB/s upload
Gigabit connection or something like that, it's so quick :3
Download link is in OP
If anyones interested, i'm using this company until i find a free alternative: https://www.digitalocean.com/?refcode=1a1e82c1521c
Very good service
Related
This is not visual mod or theming and so posted in Android Development section.
As we all are aware there is memory leak issue with JB Roms (may not be experienced in some case), so I decided to play with framework jars and mod them to optimize RAM management.
I had used Advanced Task Killer on JB Rom and problems became grave, I needed to restart device after every hour.
So freeing the RAM in that way didn't work at all.
So, I decided to try reverse and let maximum multitasking take place (ofcourse, with optimal RAM free for launching new activities)
This can be done customizing ADJ parameters.
ICS or JB doesn't read ADJ values from build.prop or local.prop - so they are hardcoded into services.jar!
Moreover, after patching the services.jar for OOM priority... kernel overrides few needed parameters and even init.d wont help in such case.
So, I have created APK file which will do all the dirty work for you
Click to expand...
Click to collapse
Ninja Mode features:
Maximum Overdrive:
As mentioned earlier, it's optimal usage of RAM for maximum multitasking intended to control memory leak.
The ROM experience will get much snappier than before even with too many apps!!
Optimized Framework:
The framework of the ROM is now PNG optimized. This will increase performance as load time should decline.
Fastest ZipAlign:
The normal zipalign option in ROM is slow as it zipaligns all apps everytime.
The method used here is different and it checks new apps if available and zipaligns!
Database Optimization:
The database files are reindexed and vaccumed. This may fasten your overall app experience.
3G Booster:
Lot's of tweak for data connection!
SdCard Read Ahead value boost
Dalvik Heap Size limit increased
Least of ads in any app (latest 'hosts')
... and many other minor tweaks...
Caution:
This mod is only for BlackCNA and is under testing.
First flash the CWM and then install the app manually.
First reboot will take little longer time as it will zipalign all apks and fix permissions.
Using this app on other ROM is not recommended as framework needed to be patched.
To uninstall this mod, uninstall the app and you will need to flash the ROM again (without wipe will do.)
Installation:
Make sure you are on BlackCNA v1.2 ROM
Flash the base via CWM and reboot.
Install the "Ninja Mode" apk manually and activate it!
Reboot one time...
Planned updates:
Customizable tweaks
Better UI for APK (This is my first app with code from scratch!! :silly
Support for other ROMS ?
Remember, this mode is under TEST and under development!
Download Links for BlackCNA 1.2:
CWM Flashable base for BlackCNA(no APK included):
http://www.mediafire.com/?xuy882qr2k9bhqt
APK File for BlackCNA:
http://www.mediafire.com/?arnv2o26whjdsjo
Download Links for ParanoidAndroid - utacka - 18Sept:
CAUTION: I have not tested on PA. It's build in same way as for BlackCNA.
Results may vary on different ROM as different factors may affect in other way as well as ROM developer effort's is considered.
Click to expand...
Click to collapse
CWM Flashable base for ParanoidAndroid (no APK included) Release 2:
http://www.mediafire.com/?cc88x8gtdta5583
APK File for ParanoidAndroid:
http://www.mediafire.com/?heb9yoqr7mwkt9q
Interesting! Will give a try.
Send from GT-N7000 using XDA Premium on Asylum ICS AOKP
Again reserved...
Great Mod my friend memory management is much better and rom is snappier. Great work... Try this out guys... Will add this to my BlackCNA thread...
i jst flashed this.....its actually snappier..!! thanx
This has fixed all force close and memory leaks I experienced . I can now used black cna as a daily driver.
Many thanks for this!!!!!!
Looks good! Would you consider adding support for Utacka's Paranoid Android builds?
Thanks for the great work!
Sent from my GT-N7000 using Tapatalk 2
Extraordinairy!!!
OMG
I cannot believe it! I did what I usually do (tons of tasks and open apps) and the RAM stayed at 220-290mb all the time!!!
YOU DID IT neobuddy89!!! You fixed the memory leak problem!!! :highfive:
R E S P E C T . _
:good::good::good::good::good::good::good::good:
apascual89 said:
Looks good! Would you consider adding support for Utacka's Paranoid Android builds?
Thanks for the great work!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
You can test that for me if I build one.
Send me framework-res.apk and services.jar from his latest build.
We can have a test drive.
EDIT: And even build.prop
2. Flash via CWM and reboot means the recovery right? I dont quite get it there ...
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
2. Flash via CWM and reboot means the recovery right? I dont quite get it there ...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes correct.
neobuddy89 said:
Yes correct.
Click to expand...
Click to collapse
We need this on every ROM mate. Puts black cna on steroids it really does. Instant
Sent from my GT-N7000 using xda app-developers app
neobuddy89 said:
You can test that for me if I build one.
Send me framework-res.apk and services.jar from his latest build.
We can have a test drive.
EDIT: And even build.prop
Click to expand...
Click to collapse
Pm sent. I'll definitely test it if you want seems to be working for everyone!
Sent from my GT-N7000 using Tapatalk 2
apascual89 said:
Pm sent. I'll definitely test it if you want seems to be working for everyone!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I don't know how it will turn out on PA.
Will post in next couple of minutes.
Posted for ParanoidAndroid. Please read the caution.
neobuddy89 said:
Posted for ParanoidAndroid. Please read the caution.
Click to expand...
Click to collapse
I get an error when flashing the PA test. It says installing update..... Set permissions-> some changes failed.
Any ideas?
Sent from my GT-N7000 using Tapatalk 2
apascual89 said:
I get an error when flashing the PA test. It says installing update..... Set permissions-> some changes failed.
Any ideas?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
You are on Hydracore kernel right ? If no, I suggest use it.
If yes, try this one:
http://www.mediafire.com/?cc88x8gtdta5583
neobuddy89 said:
You are on Hydracore kernel right ? If no, I suggest use it.
If yes, try this one:
http://www.mediafire.com/?cc88x8gtdta5583
Click to expand...
Click to collapse
OK that one flashed fine I'll install the apk, reboot and will report back . Thanks
After installing the apk, and clicking on the "Activate Ninjutsu" button, I'm getting the following error - " Ninja mode not correctly installed. Press back to exit". Running Black CNA v1.2.
Edit: Sorry, I had forgotten to flash the base! Fixed Now!
................................................................DARKNESS ROMS....................................................................................
This rom is compiled from source and most of the color has been greyed out. I made this rom because i was tired of the blues and other colors so made this for my personal use. Decided to share the rom for others who might find it usefull. I will most likely update once a week.
build from cm10.2 source
working pie controls
mms moded for unlimited size messages to be sent
some init.d tweaks
SystemUI tweaks
mms.apk and contacts.apk partly themed ( work in progress more to come)
added adaway for those who want it (must be activated by app in app drawer)
some graphic glitchs in browser and when scrolling
IF ROOT IS LOSS ENABLE IN DEVELOPER SETTINGS ROOT ACCESS SELECT APPS & ADB THEN REBOOT
added raw-kernel-r2 (thanks for new kernel @GeeckoDev stop by his thread and say thanks kernel thread
ROM DOWNLOAD (4.3):DARKNESSROM(9/17)
DARKNESS-(9/22)
GAPPS 4.3: http://goo.im/gapps/gapps-jb-20130813-signed.zip
MIRROR (4.3):http://www.mediafire.com/download/f1655qox33y3j5v/gapps-jb-20130813-signed.zip
flashing rom
download rom and gapps
full wipe
flash rom then gapps
reboot
rom can be flashed over 10.1 with no wipes but any problems try full wipe and retest
changelog for cm10.2:http://changelog.bbqdroid.org/#/n7000/next
Nice Icons.. great
Sent from my GT-N7000 using Tapatalk 2
welcome dude
whats the kernel?
Kernel is stock with ROM
sent from the DARKNESS
Well done. Very good see a another CM10.1 roms. Congrats . Will test it out :good:
But you should consider some other source for downloads. Why don't you register in goo.im
Galaxtus said:
Well done. Very good see a another CM10.1 roms. Congrats . Will test it out :good:
But you should consider some other source for downloads. Why don't you register in goo.im
Click to expand...
Click to collapse
yep i second that.
maybe even dev host..
regards
Ask bangsti for mirrors
Downloading now
Sent from my GT-N7000 using xda premium
I will be looking in to new host sites just had that one
sent from the DARKNESS
added mediafire host much faster download
Nice rom so far. Love those greys. But found small bug. Take a look at the Google now app. Its has major graphical glitches more update will come soon.
#Galaxtus#
I well look into that
sent from the DARKNESS
OP updated with lasted cm merges and gapps updated with google search fix
There is a major problem. The current version. It seems this ROM is not establishing any network. I thought it was at my end. Tried to install this from past 3 days but exact same problem. There is always unknown baseband in About phone menu. See screenshot. Please see through.
#Galaxtus#
redownload rom and try. i just uploaded fixed rom and flashed on two phones and is working i belive there was a problem with phone.apk that was giving this problem. let me know if it is fixed or not
do you really name it DARNESS_[4.2.2]_CM10.1_V1.0?? missing k here (in build number)... without this k everything will be a mess..... k is very important you know...
ps: nevermind me...just boring waiting for it to download. thanks for the rom.
Didn't even notice that the whole ROM may fall apart hahaha will pay more attention in following builds
Sent from my GT-N7000 using XDA Premium HD app
I am Mithun46 - not mithun64 lol
mithun46 said:
I am Mithun46 - not mithun64 lol
Click to expand...
Click to collapse
Ops fixed
sent from the darkness
Thanks for the ROM
mithun46 said:
mithun46 - not Mithun46
Click to expand...
Click to collapse
Dude really ...be grateful that the dev has mentioned your name in the first place ...are your posts helping in development? No ...so please don't post stuff like case sensitive mistakes....
Sent from my GT-N7000 using xda premium
Supports all AOSP / CM based KitKat ROMs (Be sure to download the correct version)
WARNING!: Only flash the kernel for your device, flashing the wrong kernel can/will lead to hard brick. Never try to install the 5110/5100 on to the 5120 and never install the 5120 on to the 5110/5100.I recommend Trickster MOD and No-frills CPU Control to customize the kernel.
Use at your own risk.
Be sure to make a full nandroid backup before flashing.I am not responsible for any damages that may occur.
Features:
Linux 3.0.71
OC & UV support for CPU and GPU
Max CPU speed is 1920MHz
Max GPU speed is 700MHz
Exfat support
DynamicFSYNC
Governors: Adaptive, Pegasusq(default), Interactive, Powersave, Performance, Ondemand, Userspace, LulzActivQ, SmartassH3, ZZmoove.
ARCH-Power enabled
ZRAM
Dynamic read-ahead
Hotplugging enable/disable
TriangleAway Support
j4fs support
Frontswap Support
Click to expand...
Click to collapse
Downloads: DracoKernel
You will see two folders "Normal ROMs" and "Alternate ROMs"
Use the normal one if you are running: CM, AOSB, Slim, or Beanstalk.
Use alternate if you are running: Carbon or Omni
Since PAC adds its own custom frameworks, it will have its own version.
If you flash the wrong one, you will be stuck on the bootanimation. Easy fix, just go flash the other one.
Installation:
Flash in recovery.
Then flash SuperSU
Goals of this kernel:
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end. With that being said, I am open to any suggestions and contributions, but I will only implement it in if it makes sense to me and does not hinder one's experience using this as a daily driver. Also, try to limit talk of benchmark scores because they do not accurately depict real life experience.
Source: https://github.com/ryukiri/DracoKernel
XDA:DevDB Information
[Kernel][N5110 / N5120 / N5100] DracoKernel, a Kernel for the Samsung Galaxy Note 8.0
Contributors
ryukiri
Kernel Special Features:
Version Information
Status: Testing
Created 2014-02-23
Last Updated 2014-05-03
Reserved
Changelog:
2.22.2014
Initial Release
Reserved
To Do:
Make sure it compiles with linaro and -O3 optimizations
BLN support
Check Boeffla sound problem
Doubletap2wake (low priority since our hardware limitations will cause it to have massive battery drain)
USB OTG
Touchwake(?)
Patch up to Linux 3.0.101
Dual boot (not sure since I don't use it much, but i may implement it in the future)
Suggestions?
Click to expand...
Click to collapse
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
people could always use mobile odin though.
mobile seem not working on the current nightly, so unable to flash
Gekritzelt von meinem Note 8
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
ryukiri said:
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
:cyclops:I have a N5100 also also waiting to try out kernel
matthewtech770 said:
:cyclops:I have a N5100 also also waiting to try out kernel
Click to expand...
Click to collapse
Can you test it?
ryukiri said:
Can you test it?
Click to expand...
Click to collapse
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
matthewtech770 said:
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
Click to expand...
Click to collapse
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
ryukiri said:
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
Click to expand...
Click to collapse
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
matthewtech770 said:
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
Click to expand...
Click to collapse
I apologize for the inconvenience. Just realized that this kernel does not work on anything but PAC. Therefore, I will spend a lot more time testing before releasing again. Thread will be closed until further notice.
Thread re-opened. Figured out the problem faster than I initially expected. Downloads are up for the N5110. I have personally tested them on the ROMs we have. There are two different versions for now so please download the correct one. Enjoy!
FYI: N5100 builds will start shortly (approximately 12-24 hours from now or so), and N5120 will start a day or two after that.
Edit: N5100 should be ready now.
Using on CM 11 (cm-11-20140226-NIGHTLY-n5100.zip) .. not bootloop for me. Works perfectly. As I have installed it just now cant comment on the performance or battery life. Using GravityBox (KK) with Xposed Framework. Didnt face any issues yet.
working with AOSB 1.3.0 on N5100 from 23rd February 2014 , no problem so far.
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Kernel works good at my end (newest nightly). Good job
Gesendet von meinem Nexus 4 mit Tapatalk
rowihel2012 said:
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Click to expand...
Click to collapse
whoops, just checked the code. I forgot to enable it in the defconfigs (files and everything are all in place though). I'll enable it next release. And no its not, I'm going to change the name to DracoKernel in future releases. Currently, thats not too high on my priority list.
Edit: Boeffla sound may take a while. Enabled it but app isn't recognizing that the kernel has the feature..
EDIT! nevermind, i'm an idiot, lol. thanks for this kernel by the way! definitely kicks major ass!
This is the stock kernel LRX22C but with @stratosk's Double Tap to Wake added.
Nothing else added or taken away
Only available for Nexus 4.
Only tested with stock ROM, others may not work.
Enable DT2W with Trickster Mod
Flash dt2w_boot.img in bootloader
Source:-
https://android.googlesource.com/kernel/msm
https://github.com/stratosk/kernel_msm
Toolchain:-
https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6
Built on Ubuntu 14.04.1 LTS
Good effort. I think world seems to have forgotten s2w which was my favorite! And its not available in any modern kernels ( even if listed it doesn't work). Any works on that?
arvindgr said:
Good effort. I think world seems to have forgotten s2w which was my favorite! And its not available in any modern kernels ( even if listed it doesn't work). Any works on that?
Click to expand...
Click to collapse
Thanks. I too liked @bponury's Slide to wake from Touch Control but the source isn't available anywhere. As far as I'm aware other versions of S2W had problems.
Can u also build a stock kernel but with gamma colors added only?
Would be greatful if u can have time to do that
Without DT2W or S2W only gamma colors from Faux or Franco..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
I would totally be interested in a tutorial, from building and configuring the kernel to add the dt2w feature.
Sent from my Nexus 4 using XDA Free mobile app
Nicknoxx said:
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
Click to expand...
Click to collapse
It would be better to use the GCC 4.7 toolchain in that case because it is more optimised and is the one used in the actual stock kernel. Also, if you need help for your guide, I can help you.
Ok I'll do a 'Guide' thread and post a link here - it will take a few days. I'll have a look at using the suggested toolchain - thanks for the offer of help - I may need it.
i flashed this kernel and result in bootloop argggggggg now i have to flash this rom again n i m going to loose all my data
is there any thing i can do with it to avoid this
EDIT - problem solved i flashed rom without wiping data but this kernel is not working for me
I've only tested it with the stock ROM, which one are you using? I'll edit the op to include this.
Nicknoxx said:
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
Click to expand...
Click to collapse
I'm here to help you too
I faced the exact same situation that you faced while starting with the kernel. It's very very hard at first but once you get familiar with all the git, cherry-pick stuff, it will be so awesome. As @zaclimon suggested you can use the STOCK toolchain if you want to stay close to STOCK or you can use THIS toolchain(2014.12 4.9.3) and THIS COMMIT which ensures you will not run into any compile errors regarding toolchain.
Nicknoxx said:
I've only tested it with the stock ROM, which one are you using? I'll edit the op to include this.
Click to expand...
Click to collapse
Bro i m using stock 5.0.1 rom but this is not working for me
tonyking said:
Bro i m using stock 5.0.1 rom but this is not working for me
Click to expand...
Click to collapse
I can't imagine why it works fit me but not you. Do you have stock recovery or root?
Nicknoxx said:
I can't imagine why it works fit me but not you. Do you have stock recovery or root?
Click to expand...
Click to collapse
No i m using twrp recovery with root
Edit- can you make a flashable zip of this kernel
tonyking said:
No i m using twrp recovery with root
Click to expand...
Click to collapse
Hmm, the same as me.
tonyking said:
Edit- can you make a flashable zip of this kernel
Click to expand...
Click to collapse
I'll try.
Edit Schoolboy error, now fixed. Will address in upcoming guide.
The first part of my guide is here
http://forum.xda-developers.com/nexus-4/general/guide-beginners-guide-to-building-t2986686
This is an unofficial SlimKat 9.1 build with patch for "Stagefright" - Bugs
CVE-2015-1538,
CVE-2015-3824,
CVE-2015-3827,
CVE-2015-3828,
CVE-2015-3829,
CVE-2015-3864,
CVE-2015-3876,
CVE-2015-6575,
CVE-2015-6602
included.
see also
- https://blog.zimperium.com/stagefright-vulnerability-details-stagefright-detector-tool-released/
Update: 2016.04.03
- clean fresh Build from SlimRoms Repo from GITHUB
Downloads
ROM: Slim-i9300-4.4.4.build.9.1-UNOFFICIAL-20160403-0846.zip - 142.48 MB UPDATE
GAPPs: LINK
Optional: Custom Kernel
Important
- You will need an current version of Google Play Services - I backed up the apk from my unpachted slimkat 9.0 system.
but you can get it also from here:
http://www.apkmirror.com/apk/google-inc/google-play-services/
Instructions- for an update from official SlimKat 9.0:
1.) Flash ROM
2.) Flash GAPPs
3.) Optional: Flash Custom Kernel
4.) Reboot - Ignore Warnings about missing Google Play Services
5.) Manual install Google Play Services - use your backed up apk!
6.) Reboot -> Ingore "GPS FC" Message, i get this warning after each reboot for a long time with slimkat ...
All credits to SlimRoms and CyanogenMod !
I'm not sure what else you did to the ROM, apart from adding the patches, but it feels significantly faster than the official Slimkat 9.0, which wasn't exactly a slouch. Good work!
This ROM is a keeper.
Sent from my GT-I9300 using XDA Free mobile app
downloading now...
acornkenya said:
I'm not sure what else you did to the ROM, apart from adding the patches, but it feels significantly faster than the official Slimkat 9.0, which wasn't exactly a slouch. Good work!
Click to expand...
Click to collapse
Alright agree wit this user. this rom feels swiftier than the official slim 9.0
Thank you so much for this! I've been using SlimKat on this device for months and it was fine as it is don't get me wrong but I'm really happy to be able to flash your updated version! I just tried SlimLP for one day and the single forced reboot I had immediately made me want to go back to SlimKat. In this case, your updated version
Vulnerable for me?
CVE-2015 6602
Nice ROM though.
Same here. CVE - 2015-6602
jikobutsu said:
Vulnerable for me?
CVE-2015 6602
Nice ROM though.
Click to expand...
Click to collapse
@Ping_2000
Me too.
This is a new vulnerability.
https://blog.zimperium.com/zimperiu...me-new-vulnerability-processing-mp3mp4-media/
But does it apply to KK rom?
If NCAS is correct there is no need to patch 2015 - 6602 for a KitKat Rom.
I just clean flashed this ROM 3 days ago, and now i'm experiencing app freezing issues in apps like maps, and sometimes whatsapp. Does anyone else has the same issue?
Sent from my GT-I9300 using Tapatalk
ansh1996 said:
I just clean flashed this ROM 3 days ago, and now i'm experiencing app freezing issues in apps like maps, and sometimes whatsapp. Does anyone else has the same issue?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
No.
I have never had any problems with this ROM.
I use boeffla kernel.
I have Xposed installed.
I use some very heavy apps. For example watching streaming cricket test matches.
This version of boeffla
No, I've Never Experienced These Issues
ansh1996 said:
I just clean flashed this ROM 3 days ago, and now i'm experiencing app freezing issues in apps like maps, and sometimes whatsapp. Does anyone else has the same issue?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Nope. I've never had problems with this ROM. I use it 'as-is,' stock kernel and all.
Hi,
just to clear things ... I don't change anything except the Stagefright related patches.
But it's nice to hear that the ROM feels often better.
I also had no complications till now.
Bye.
baltics said:
If NCAS is correct there is no need to patch 2015 - 6602 for a KitKat Rom.
Click to expand...
Click to collapse
is it safe to use this rom with that vulnerability ?????? are you sure ?????
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
Ping_2000 said:
Hi,
just to clear things ... I don't change anything except the Stagefright related patches.
But it's nice to hear that the ROM feels often better.
I also had no complications till now.
Bye.
View attachment 3522246
Click to expand...
Click to collapse
can you please fix the last vulnerability '''' cve-2015-6602 '''' because the stagefright detector says my device is vulnerable ?????
hamza touati said:
is it safe to use this rom with that vulnerability ?????? are you sure ?????
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
can you please fix the last vulnerability '''' cve-2015-6602 '''' because the stagefright detector says my device is vulnerable ?????
Click to expand...
Click to collapse
Hi,
i did a build http://d-h.st/vwoB, please try it. I have actual no SGS III for testing.
I replaced frameworks/av with current version from cm11, last patches 26days ago ...
bye
Ping_2000 said:
Hi,
i did a build http://d-h.st/vwoB, please try it. I have actual no SGS III for testing.
I replaced frameworks/av with current version from cm11, last patches 26days ago ...
bye
Click to expand...
Click to collapse
Thanks @Ping_2000
I know you don't own this device but any chance you can update/optimize it? I can test the builds. Many i9300 still use this ROM and will appreciate this.
cokesucker said:
Thanks @Ping_2000
I know you don't own this device but any chance you can update/optimize it? I can test the builds. Many i9300 still use this ROM and will appreciate this.
Click to expand...
Click to collapse
Hi,
i'm sorry but i can't become an rom maintainer. I did patches for fixing stagefright with patch sets from cm11, and so i shared the result.
But for real maintaining / optimizing there is a lot more to do ...
Did someone tests latest build?
Bye.
Ping_2000 said:
Hi,
i'm sorry but i can't become an rom maintainer. I did patches for fixing stagefright with patch sets from cm11, and so i shared the result.
But for real maintaining / optimizing there is a lot more to do ...
Did someone tests latest build?
Bye.
Click to expand...
Click to collapse
Ok thanks, thought i would ask.
Yes the latest build is working great. Im using it now.patches seem to be in order
Ping_2000 said:
Hi,
i'm sorry but i can't become an rom maintainer. I did patches for fixing stagefright with patch sets from cm11, and so i shared the result.
But for real maintaining / optimizing there is a lot more to do ...
Did someone tests latest build?
Bye.
Click to expand...
Click to collapse
Please can you make a fix for the last liquidsmooth 3.2 kk it should be easy because it is based on slimkat ??????