[ROM][DEV][WIP] CyanogenMod 11 for the LG G Flex - LG G Flex

DISCLAIMER: This is a CUSTOM' ROM! Use at YOUR OWN RISK!!! By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT. Use at your own risk!
At this time, this is only for Devs and/or people who think they can assist in fixing the issues. It is in no way ready to be a daily driver!!!
Also, you need to make sure you know how and are comfortable with flashing, restoring, fixing any mishaps that might occur on your own. At this time is a development thread, not a hold anyones hand on how to install etc, etc, etc. This statement isnt meant to be mean, just no general support will be offered at this time. That will come when the builds are in beta or stable.
Here ya go folks, CyanogenMod 11 for the G Flex (zee)!!! Well, let's be honest, unless you're living under a rock, you probably know what Android 4.4 (kitkat) is. Furthermore, you should know what the CyanogenMod project is. However, if a rock is really your home and you'd like to learn more, please visit their site: CyanogenMod | Android Community Rom based on KitKat.
Version: 20140709
Developer: PlayfulGod
Description: CyanogenMod 11 for LG G Flex
Source: github
Status: WIP/Testing
CyanogenMod 11
What is this?
This is a build of the popular CyanogenMod 11 for the LG G Flex. This is built from source.
People to Thank
CyanogenMod - Do I need to state why we owe thanks to these guys?
koush - for his wonderful recovery.
the G2 Devs - for all the work on the g2 which this is all based off of.
savoca - for kernel patches.
[vertigo] - for vendor blob experimenting!!!
Whats Working??
It boots
Wifi
calls/sms/data
Bluetooth, sorta!!!
Whats Not Working??
calls/sms/data
camera
bluetooth, crashes when pairing.
sound
Changelog
How do I install this?
NOTE: Need to be on the latest version of CWM or TWRP Recovery, and have the f340k aboot installed.
Download the .zip & copy to phone (make sure wifi is enabled if dl'd from phone).
Zip can be installed from either sdcard or with sideload (No need to copy zip to phone if using sideload, see instructions for sideload below).
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-11-xxxxxxxxxx-UNOFFICIAL-xxxx.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
If using sideload:
Download zip on PC
boot to recovery
install zip from sdcard
install zip via acb sideload
Connect to PC via USB (make sure to have USB drivers if using Windows)
Open a terminal or cmd window and type:
Code:
adb sideload cm-11-xxxxxxxx-UNOFFICIAL-xxxx.zip
Repeat for Gapps.
Reboot
Downloads
Build - 07092014
Gapps
4.4.3 Gapps
XDA:DevDB Information
CyanogenMod 11, ROM for the LG G Flex
Contributors
PlayfulGod, savoca
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: f340k 4.2.2 aboot, latest CWM or TWRP.
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-06-12
Last Updated 2014-07-10

Reserved

Wooohooo!! Hopefully this breaks the ice ?
Sent from my LG-D958 using XDA Premium 4 mobile app

Well I'm flashing when I get home?
Sent from my LG-D950 using XDA Premium 4 mobile app

I'll help you build, what device tree did you use? I just picked up my flex today.
Sent from my LG-D950 using Tapatalk

Once all the stuff listed under whats not working, works, ill try this out.

Where do we get the OK modem you speak of.
Sent from my LG-D959 using Tapatalk

mattwheat said:
Where do we get the OK modem you speak of.
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
In most cases it will need to be pulled from a device running 4.4.2
for your D959, you can get it here tho.
I have the kk modem for the D950 on codefire too.

My hat of to you sir. Are you using the same jb aboot as before
Sent from my LG-D959 using XDA Premium 4 mobile app

sickkside13 said:
My hat of to you sir. Are you using the same jb aboot as before
Sent from my LG-D959 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks. Yea same aboot and recoveries are being used.

PlayfulGod said:
thanks. Yea same aboot and recoveries are being used.
Click to expand...
Click to collapse
You using Sprint device tree? Hit me up on hangouts if you need help dude, I'm gonna try to have mine built by early next week
Sent from my LG-D950 using Tapatalk

didnt know there was a TWRP or CWM for kitkat and this phone, but its great to see work on this evolving!
Thanks!

eZdubzitmk4 said:
You using Sprint device tree? Hit me up on hangouts if you need help dude, I'm gonna try to have mine built by early next week
Sent from my LG-D950 using Tapatalk
Click to expand...
Click to collapse
I'm using d959
wase4711 said:
didnt know there was a TWRP or CWM for kitkat and this phone, but its great to see work on this evolving!
Thanks!
Click to expand...
Click to collapse
there isnt, using the same ones we been using.

Thanks for the link playful. Got a question though. I did the three wipe method (dalvik, cache, and system) like you said and flashed the cm11 both downloads I download numerous times ,I thought maybe I got a bad download. And both downloads every time I flash comes up "failed" I'm on 4.2.2 rooted with twrp installed. I reran your freedom apk to make sure the f340 aboot was installed. And still nothing. About 10 sec after the "updating partitions" line comes up it pops up in twrp "failed". Any suggestions? Hints?
Sent from my Nexus 7 using Tapatalk
---------- Post added at 10:46 PM ---------- Previous post was at 10:42 PM ----------
Your instructions I see don't actually say to wipe system does that make a difference? And also your instructions describe the cwm recovery options. Should I be using cwm instead?
Sent from my Nexus 7 using Tapatalk

mattwheat said:
Thanks for the link playful. Got a question though. I did the three wipe method (dalvik, cache, and system) like you said and flashed the cm11 both downloads I download numerous times ,I thought maybe I got a bad download. And both downloads every time I flash comes up "failed" I'm on 4.2.2 rooted with twrp installed. I reran your freedom apk to make sure the f340 aboot was installed. And still nothing. About 10 sec after the "updating partitions" line comes up it pops up in twrp "failed". Any suggestions? Hints?
Sent from my Nexus 7 using Tapatalk
---------- Post added at 10:46 PM ---------- Previous post was at 10:42 PM ----------
Your instructions I see don't actually say to wipe system does that make a difference? And also your instructions describe the cwm recovery options. Should I be using cwm instead?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Twrp doesn't like 4.3 and higher. Don't have a clue why. Cwm Will do the trick. Which is a bummer for me because I really prefer twrp.
Sent from my LG-D950 using XDA Premium 4 mobile app

brandonhatty said:
Twrp doesn't like 4.3 and higher. Don't have a clue why. Cwm Will do the trick. Which is a bummer for me because I really prefer twrp.
Sent from my LG-D950 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
me too me too. is the cwm touch or use hard keys to navigate ?
Sent from my LG-D959 using Tapatalk

mattwheat said:
me too me too. is the cwm touch or use hard keys to navigate ?
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
It's old school button style but it has the swipe left or right for back and enter. Doesn't work that great though.
Sent from my LG-D950 using XDA Premium 4 mobile app

Cool I'm about to install cwm to try this ROM out
Sent from my LG-D959 using Tapatalk
---------- Post added at 09:06 AM ---------- Previous post was at 08:20 AM ----------
Still didn't work. Gave me "error 7". "Wrong boot.IMG this software is for d950, f340, and d959. Your device is ls800"
Sent from my LG-D959 using Tapatalk

ummm, cwm should be touch now and I'll have to check my imgs, purdy sure I had fixed and updated twrp to work too. Will check and test those.
@mattwheat WTF do you have installed for it to say its a ls800?

PlayfulGod said:
ummm, cwm should be touch now and I'll have to check my imgs, purdy sure I had fixed and updated twrp to work too. Will check and test those.
@mattwheat WTF do you have installed for it to say its a ls800?
Click to expand...
Click to collapse
thanks man, if we could get twrp to work, I would feel much safer testing and trying different things out, but, with no custom recovery, and after already bricking this thing once, I prefer to leave well enough alone...

Related

[MiniTool] [Flashable Zip] [CASUAL] [4.3+] Nexus 4 Stock Recovery Flasher v0.6

Nexus 4 Stock Recovery Flasher v0.6
Have you ever get into a situation where you have a custom recovery on a stock rom and then get a OTA update then you find out that you need to flash the stock recovery to flash?, well this Nexus 4 Stock Recovery Flasher will sort it all out.
DISCLAMER: I am not responsible for ANY damage to your device what so ever, if your device flies away then that is not my problem.
NOTICE: This will flash the Android 4.3 and above stock recovery so if you have issues with the recovery just by having anything that is suppose to be running on Android 4.2.2 or below then that is your problem, it is possible to get the Android 4.2.2 recovery but it is pointless really since Android 4.3 is the latest version.
Also, PLEASE make sure you flash the recovery which is intended for that Android version so for example 4.3 recovery for 4.3 and 4.4 recovery for 4.4.x.
Be sure to donate to me if I really helped you.
Starts from Android 4.3 Stock Recovery
Windows, Linux and CASUAL Version is available.
DOWNLOAD MINITOOL/CASUAL
Flashable Zip here:
DOWNLOAD FLASHABLE ZIP
Nexus 4 Stock Recovery Flasher for Linux v0.2 Video
https://www.youtube.com/watch?v=U8mQboJt2iE
Nexus 4 Stock Recovery Flasher CASUAL v0.2
https://www.youtube.com/watch?v=cZRYODympaA
Operating Systems Tested on:
Windows 8 Pro X64
Windows 8.1 X64
Ubuntu 13.10 X86
Site Status: Online
If Offline, having issues downloading or the site then use the mirror post:
http://forum.xda-developers.com/showpost.php?p=47726527&postcount=71
​
Minitools:
Version 0.1: Initial Release
Version 0.2: Fixed Echo commands and added a command that I forgot to add. [Last 4.3]
Version 0.3: 4.4 KitKat recovery added (Replaces 4.3 Recovery)
Flashable Zip:
Version 0.1: Initial Release
Version 0.2: Unknown, I forgot to add that "minor" incremental changelog ages ago. :S
Version 0.3: Now works in all recoveries thanks to Flintburg. [Last 4.3]
Version 0.4: 4.4 KitKat recovery added (replaces 4.3 Recovery)
CASUAL:
Version 0.2: Initial Release (based on the minitool).
Version 0.3: Added banner.
Version 0.4: Fixed commands, this will fix the execution issues so I would upgrade unless you want to have a broken version, turns out that the CASUAL I am currently using is missing Fastboot, I will look at this and try fixing it in a certain future version.
This will set a new requirement which is to have a custom recovery as it is the only way to replace the recovery that way (this uses the Flashable zip since there are no other methods), it will remain like this until CASUAL supports Fastboot.
Version 0.5: Added the latest Flashable Zip (as of this date which is v0.3), should work in all recoveries now.
Version 0.6: 4.4 KitKat recovery added
What features/files does the minitool contain?, well...:
The Stock Recovery Flasher (obviously), batch file updater to update the file itself so you don't need to waste your time downloading the file again as an update, ADB files, Fastboot, wget for Windows to download the file which is required for the updater and of course the stock Android recovery.
If you want I can give you the Android 4.2.2 recovery.img image for the tool.
The updater was introduced from the Soft-Brick Recovery Project for the LG GT540 which I created myself.
Anyway post your results below so I know if it works or anything like that.
By the way in case you where wondering why all the files are in one place its because that I cannot find out a CMD command to move a file back one directory for the updater, if I do my method then it has to be in a certain directory so unfortunately that's how it is going to be until I find out the command.
First!
Can be really helpful!
Thanks alot and also post it in the Developement section maybe!
Sent from my Nexus 4 using xda app-developers app
failly said:
First!
Can be really helpful!
Thanks alot and also post it in the Developement section maybe!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I was thinking about it but looking at the rules of posting or whatever it did not mention anything or any part of this simple tool.
EDIT: Just PMed Mike, now we will have to just wait for the options...
EDIT 2: Moved!
Sent from my Nexus 4 using Tapatalk 4
Bump for being the easiest place to find the .img for the stock recovery. Thanks man! And if you're looking to move up a directory, it's just
Code:
cd ..
karasuhebi said:
Bump for being the easiest place to find the .img for the stock recovery. Thanks man! And if you're looking to move up a directory, it's just
Code:
cd ..
Click to expand...
Click to collapse
Yeah that is the problem, I can't move the file like that unfortunately, I guess I will have to leave it to that.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
Version 0.1: Initial Release
Version 0.2: Fixed Echo commands and added a command that I forgot to add.
Click to expand...
Click to collapse
what echo commands are you referring to?
detdett said:
what echo commands are you referring to?
Click to expand...
Click to collapse
The ones that echo the input text to output text like within the batch script.
Sent from my Nexus 4 using Tapatalk 4
Can you make a flashable zip to flash in recovery?
Sent from my Nexus 4 using Tapatalk
Zehlek said:
Can you make a flashable zip to flash in recovery?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yeah sure, I will just create it "quickly".
Sent from my Nexus 4 using XDA Premium 4 mobile app
Thanks man. I'll use this soon.
Sent from my Nexus 4 using xda app-developers app
zerosource said:
Thanks man. I'll use this soon.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
It is now in the OP.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Thank you very much, I really appreciate it.
Thank you for your contribution.
But unfortunately, the flashable zip file does not work.. The file is corrupted.. I even tried downloading it few times..
Thanaya said:
Thank you for your contribution.
But unfortunately, the flashable zip file does not work.. The file is corrupted.. I even tried downloading it few times..
Click to expand...
Click to collapse
Got the same, try it now.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Thanaya said:
Thank you for your contribution.
But unfortunately, the flashable zip file does not work.. The file is corrupted.. I even tried downloading it few times..
Click to expand...
Click to collapse
Worked for me when I flashed it
Sent from my Nexus 4 using Tapatalk
Zehlek said:
Worked for me when I flashed it
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
It works now because I have recompressed and uploaded it, it was around 6MB when it should be around 12MB.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Ok, today I am just going to create the Linux version of the flasher so stay tuned.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Hey andyanc keep up the good work. I have a suggestion though. I'm not sure if the recovery has changed since the initial 4.3 release for the Nexus 4 but if it has, I suggest you note in the OP which version of the recovery is included in your tools. Cheers!

Nexus 4 Android 4.4 Kitkat Zip Image

Note: I've posted a flashable factory image and radio posted by Imparticus in the Stock Kitkat thread over the Nexus 4 development section.
Hey everyone, I've seen people post instructions on where to download the 4.4 update for the Nexus 4 but I haven't seen anyone post the .zip version of it yet.
Another user, Imperticus, posted these flashable zip files of the rom and radio respectively.
Here's the Kitkat ROM: https://mega.co.nz/#!eJEh0SpT!TERt-SwkNKuAYgVCEvX1NmmxR_R8MFET15uhjAB-9tM
And here's the radio, which you should flash AFTER flashing the ROM above: https://mega.co.nz/#!iRcgEZJB!YBn6d1jE9OGesABJ8OaKyH34o9QStz1OlO6OUJCf6dI
-Sincerely, bobofosho123
Hey, Benn waiting for this. You the man! Quick question, will this update radio, binary, etc?
Sent from my Nexus 4 using Tapatalk 2
Can I flash your .zip over a custom ROM? I'm using that previous build that PA made over KitKat's source.
Rooted, stock 4.3, TWRP recovery.,stock kernel.
Try to flash through recovery and it fails without any informative error message. Any thoughts on what I'm doing wrong?
Sent from my Nexus 4 using xda app-developers app
chrisrozon said:
Rooted, stock 4.3, TWRP recovery.,stock kernel.
Try to flash through recovery and it fails without any informative error message. Any thoughts on what I'm doing wrong?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Reboot to bootloader then go to recovery. If this doesn't work (seems odd but some people have gotten it working after rebooting to bootloader first), just boot to bootloader and then:
fastboot erase recovery
Click to expand...
Click to collapse
fastboot flash recovery nameofrecovery.img
Click to expand...
Click to collapse
+1 on the failed flash.
Sent from my Nexus 4 using Tapatalk 2
---------- Post added at 10:58 PM ---------- Previous post was at 10:45 PM ----------
Mercado_Negro said:
Reboot to bootloader then go to recovery. If this doesn't work (seems odd but some people have gotten it working after rebooting to bootloader first), just boot to bootloader and then:
Click to expand...
Click to collapse
Still a no-go. Time to try the factory image I suppose. Thanks anyway
Sent from my Nexus 4 using Tapatalk 2
jto101680 said:
+1 on the failed flash.
Sent from my Nexus 4 using Tapatalk 2
---------- Post added at 10:58 PM ---------- Previous post was at 10:45 PM ----------
Still a no-go. Time to try the factory image I suppose. Thanks anyway
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Go for it. Seriously, flashing the images takes about three minutes or so and it's safer. Just remember to boot to recovery afterwards to do a factory reset and wipe cache to prevent a bootloop (this will wipe your storage so make a backup first).
For both zip files that have come up tonight I can't flash them, ended up just flashing back to my CM 10.2 nightly. Just gives the same error.
Jasperov said:
For both zip files that have come up tonight I can't flash them, ended up just flashing back to my CM 10.2 nightly. Just gives the same error.
Click to expand...
Click to collapse
What recovery (version) are you using?
I've confirmed this isn't working
Deleted.
This could be wrong but wouldn't this need to be flashed via stock recovery or ADB?
Sent from my Nexus 4 using XDA Premium HD app
AgentCherryColla said:
This could be wrong but wouldn't this need to be flashed via stock recovery or ADB?
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
I'm downloading the new ROM posted by Imperticus right now, so I'll report back once I know.
I was using twrp 2.6.3.3
Sent from my Nexus 4 using Tapatalk 2
Flash Stock Image
jto101680 said:
I was using twrp 2.6.3.3
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Hi there, use CWR latest.......But take note that it will be a clean Boot ( pls back up your data )......which mean when you boot up...everything is stock ( root remains). ..flash radio and super su after you let the rom running for a while.:good:
Does someone flash the flashable zip of KitKat over stock 4.3 with custom kernel and root and can confirm it will boot without wipe?
Sent from my Nexus 4 using Tapatalk
ADB Sideload
bobofosho123 said:
Note: I've posted a flashable factory image and radio posted by Imparticus in the Stock Kitkat thread over the Nexus 4 development section.
Hey everyone, I've seen people post instructions on where to download the 4.4 update for the Nexus 4 but I haven't seen anyone post the .zip version of it yet.
Another user, Imperticus, posted these flashable zip files of the rom and radio respectively.
Here's the Kitkat ROM: https://mega.co.nz/#!eJEh0SpT!TERt-SwkNKuAYgVCEvX1NmmxR_R8MFET15uhjAB-9tM
And here's the radio, which you should flash AFTER flashing the ROM above: https://mega.co.nz/#!iRcgEZJB!YBn6d1jE9OGesABJ8OaKyH34o9QStz1OlO6OUJCf6dI
-Sincerely, bobofosho123
Click to expand...
Click to collapse
Is it possible to sideload this update zip to a stock Nexus 4????
I got this working with a stock ROM with CWM recovery installed and an unlocked bootloader. Thank you.
Tried to install, but got an error. Cwm 6.0.3.2
Warning no file contexts/metadata/recursive somw changes failed...
Status 7
Stuck in bootloop now.
hi, which version it is? thank you
Hello guys, my wifi is broken, I missed something? I came from AOSPA Alpha.

htc one cyanogenmod

Can anyone tell i recently flash cyanogenmod on my htc one..now the cyanogenmod android 4.4 is available through cyanogenmod OTA..if i update my phone so i hve to reflash gapps for 4.4 and if i re flash 4.4 gapps my all previous data on google apps would be deleted or its remain in my phone???
Aisfkhan said:
Can anyone tell i recently flash cyanogenmod on my htc one..now the cyanogenmod android 4.4 is available through cyanogenmod OTA..if i update my phone so i hve to reflash gapps for 4.4 and if i re flash 4.4 gapps my all previous data on google apps would be deleted or its remain in my phone???
Click to expand...
Click to collapse
This is like a three part question. But first never flash any ROM without backing up all your installed apps data. Unless you don't care about data loss. So basically the ota is a new ROM. Yes it will erase your data. However it won't touch the data on your sdcard. Only the ROM data. Such partitions of /data, /system, & /cache. You would need to reflash gapps as a
cm ota wont have gapps preinstalled. Also you would need to make sure you have the latest recovery. Some 4.4 ROMs don't flash properly without the correct recovery.
Sent from my SAMSUNG-SGH-T999 using xda premium
da-pharoah said:
This is like a three part question. But first never flash any ROM without backing up all your installed apps data. Unless you don't care about data loss. So basically the ota is a new ROM. Yes it will erase your data. However it won't touch the data on your sdcard. Only the ROM data. Such partitions of /data, /system, & /cache. You would need to reflash gapps as a
cm ota wont have gapps preinstalled. Also you would need to make sure you have the latest recovery. Some 4.4 ROMs don't flash properly without the correct recovery.
Sent from my SAMSUNG-SGH-T999 using xda premium
Click to expand...
Click to collapse
OMG
So if i update i have to install all my apps again???
And if gapps is not available for 4.4 then???
Aisfkhan said:
OMG
So if i update i have to install all my apps again???
And if gapps is not available for 4.4 then???
Click to expand...
Click to collapse
That's the nature of updating. And if there wasn't gapps avail then it would mean it came out five minutes ago and just wait a hour or two and folks will create some. I take it your new to this. So lots of reading helps.
Sent from my SAMSUNG-SGH-T999 using xda premium
da-pharoah said:
That's the nature of updating. And if there wasn't gapps avail then it would mean it came out five minutes ago and just wait a hour or two and folks will create some. I take it your new to this. So lots of reading helps.
Sent from my SAMSUNG-SGH-T999 using xda premium
Click to expand...
Click to collapse
no.. i flash new 4.4 cyanogenmod rom with pa-gapps 4.4 but gapps not working perfectly
Can u plz suggest better recovery for flashing 4.4 roms ..I previously used TWRP 2.6.3.0 but it gives error when i try to flash 4.4 based roms
Sent from my HTC One using xda app-developers app
vaibhav satam said:
Can u plz suggest better recovery for flashing 4.4 roms ..I previously used TWRP 2.6.3.0 but it gives error when i try to flash 4.4 based roms
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Before i use twrp 2.6.3.0 but failed
then i flash twrp 2.6.3.3 then its work
Aisfkhan said:
Before i use twrp 2.6.3.0 but failed
then i flash twrp 2.6.3.3 then its work
Click to expand...
Click to collapse
Can you plz provide me link for new recovery i looked for TWRP Thread but its showing link for 2.6.3.0 only
Sent from my HTC One using xda app-developers app
vaibhav satam said:
Can you plz provide me link for new recovery i looked for TWRP Thread but its showing link for 2.6.3.0 only
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.6.3.3-m7.img
i downloaded from here
I wouldn't use any of the unofficial CM 11 builds if you need to use GPS. It was all over the place so I went back to 10.2 official. There isn't much to be excited about in 4.4 anyway. I didn't notice much of a difference.
FXOjafar said:
I wouldn't use any of the unofficial CM 11 builds if you need to use GPS. It was all over the place so I went back to 10.2 official. There isn't much to be excited about in 4.4 anyway. I didn't notice much of a difference.
Click to expand...
Click to collapse
yeah i also dwongrade to 4.3 cm 10.2.
but i will flash later when the stable and gapps of 4.4 will release
Aisfkhan said:
yeah i also dwongrade to 4.3 cm 10.2.
but i will flash later when the stable and gapps of 4.4 will release
Click to expand...
Click to collapse
Who is your carrier? Att by chance?
Sent from my SGH-T999 using xda premium
da-pharoah said:
Who is your carrier? Att by chance?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
No i hve international version of htc one m7ul..
Gotcha
Sent from my SGH-T999 using xda premium
What??
Sent from my HTC One using XDA Premium 4 mobile app
Aisfkhan said:
What??
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nothing. I have a ROM for the att version of your phone. Was going to tell you to try it if you were on att. But no worries.
Sent from my SGH-T999 using xda premium
da-pharoah said:
Nothing. I have a ROM for the att version of your phone. Was going to tell you to try it if you were on att. But no worries.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Ohh att is for US only and i live in Pakistan
Sent from my One using xda app-developers app
da-pharoah said:
Nothing. I have a ROM for the att version of your phone. Was going to tell you to try it if you were on att. But no worries.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Can u please send me apk of xda premium if u dont mind
Sent from my One using xda app-developers app

[rom][port][semi nightlies] mokee os for vs980

This is a port of the awesome mokee os ROM I put together for myself and figured I'd share since the mokee os team has yet to release for the vzw g2
The main thread for the team on the g2 forum is here: http://forum.xda-developers.com/showthread.php?t=2624235. check it out for more info on the ROM. Specifically, this is a port of the d800 version where I changed some things around just to get it to flash. The real heavy lifting is done by dr87's awesome vs980 patch from the also awesome mahdi ROM thread. So go thank him, savoca, (for furnace kernel) and ryuinferno (the mokee g2 maintainer) for all their work for our community. Also I'm no dev so I obviously can't provide support or what not, and don't crowd up the devs threads with support questions as they don't support our phone. so basically this is provided as is. Also if anyone wants a different ROM ported to the vs980 just pm me and I'll give it a shot. Anyways on to the deets.
Install instructions:
wipe everything. system,cache,dalvik and data 3x
Flash ROM.
Flash gapps (optional)
Flash vs980 patch
Flash vs980 kernel (I used furnace kernel. Also idk if this is necessary but I did it just to be safe.)edit: it is required for odex builds
Profit.
Bugs: for now it says d800, I may fix it next time but it doesn't hurt nothing. (fixed i think someone wanna confirm?)
Do not use the in ROM ota update.
It says tcdma 64
If you have rotation issues download the fix from my drive then boot to recovery and flash the fix then reflash your kernel of choice (credit tangjun269)
What ever bugs mokee has
Other?
Download link: https://docs.google.com/folder/d/0B0lbyXDReetfSVh5MFA2M3RyMGs/edit
Might be missing something, but I don't see the ROM? Unless its probam?
Sent From My Vs980
blazewit said:
This is a port of the awesome mokee os ROM I put together for myself and figured I'd share since the mokee os team has yet to release for the vzw g2
The main thread for the team on the g2 forum is here: http://forum.xda-developers.com/showthread.php?t=2624235. check it out for more info on the ROM. Specifically, this is a port of the d800 version where I changed some things around just to get it to flash. The real heavy lifting is done by dr87's awesome vs980 patch from the also awesome mahdi ROM thread. So go thank him, savoca, (for furnace kernel) and ryuinferno (the mokee g2 maintainer) for all their work for our community. Also I'm no dev so I obviously can't provide support or what not, and don't crowd up the devs threads with support questions as they don't support our phone. so basically this is provided as is. Also if anyone wants a different ROM ported to the vs980 just pm me and I'll give it a shot. Anyways on to the deets.
Install instructions:
wipe everything.
Flash ROM.
Flash patch
Flash vs980 kernel (I used furnace kernel. Also idk if this is necessary but I did it just to be safe.)
Profit.
Bugs: for now it says d800, I may fix it next time but it doesn't hurt nothing. (fixed i think someone wanna confirm?)
Do not use the in ROM ota update.
It says tcdma 64
What ever bugs mokee has
Other?
Download link: https://docs.google.com/folder/d/0B0lbyXDReetfSVh5MFA2M3RyMGs/edit
Click to expand...
Click to collapse
Is it the probam
Sent from my LG-VS980 using XDA Premium 4 mobile app
Lawlrus said:
Might be missing something, but I don't see the ROM? Unless its probam?
Sent From My Vs980
Click to expand...
Click to collapse
rayraycarter4 said:
Is it the probam
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Your right the upload some how got paused. Should be done in a few mins, my fault
Lawlrus said:
Might be missing something, but I don't see the ROM? Unless its probam?
Sent From My Vs980
Click to expand...
Click to collapse
rayraycarter4 said:
Is it the probam
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Should b ready now
Gapps?
Sent from my LG-VS980 using XDA Premium 4 mobile app
rayraycarter4 said:
Gapps?
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Use whatever you want. They are gapps lol
Sent From My Vs980
Okay thanks
Sent from my LG-VS980 using XDA Premium 4 mobile app
rayraycarter4 said:
Gapps?
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I used the pa modular mini zip although u can use any u like. but fyi this ROM doesn't have trds so slim gapps are kinda pointless
Oh if anyone has the bug where after your done w a call and pull it from your ear the screen won't turn back on this ROM has a setting in display that will turn the screen on when the phone hangs up. It actually works decently well, idk why every aosp ROM doesn't have that feature cuz so many of em have that bug on the g2
Orientation isn't right
Sent from my LG-VS980 using XDA Premium 4 mobile app
rayraycarter4 said:
Orientation isn't right
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It was fine for me, did u come to mokee from one of the flex roms? I no i had issues w rotation after coming from rayglobe when i was on twrp. I think it may have something to do with twrp not wiping completely, u may wanna try phillz then if u still have it try flashing a different vs980 aosp rom then wipe n flash mokee again
blazewit said:
It was fine for me, did u come to mokee from one of the flex roms? I no i had issues w rotation after coming from rayglobe when i was on twrp. I think it may have something to do with twrp not wiping completely, u may wanna try phillz then if u still have it try flashing a different vs980 aosp rom then wipe n flash mokee again
Click to expand...
Click to collapse
I came from a different aosp rom and I clean flashed it twice
Sent from my VS980 4G using XDA Premium 4 mobile app
rayraycarter4 said:
I came from a different aosp rom and I clean flashed it twice
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im gonna be uploading an update today so I'll try to figure out why you are getting the rotation bug still, cuz the patch file is supposed to fix that
blazewit said:
Im gonna be uploading an update today so I'll try to figure out why you are getting the rotation bug still, cuz the patch file is supposed to fix that
Click to expand...
Click to collapse
Okay cool
rayraycarter4 said:
Okay cool
Click to expand...
Click to collapse
Update is live
I'm about to install will check back in a few
Sent from my VS980 4G using XDA Premium 4 mobile app
blazewit said:
Update is live
Click to expand...
Click to collapse
I have trying to port this to ls980 how did you port this i got it to boot but systemiui would stop working
Thanks
Sent from my LG-LS980 using xda premium
mchlbenner said:
I have trying to port this to ls980 how did you port this i got it to boot but systemiui would stop working
Thanks
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
All I did is to take a d802 build, unzip it, change out the boot IMG to your model, edit the updater script and build prop to include your model number then rezip so it'll flash correctly, then download your device specific patch from one of dr87's ROM threads, then flash the ROM, gapps, the patch, then your kernel of choice. The patch that dr87 made is really just a script that injects all the variant specific stuff into the ROM so u can fairly easily just include it yourself but the script works well so I didn't bother.
Landscape Hell
I installed this last night and I was really liking it BUT every app/new window I opened was in landscape mode .... the home screen was the only thing that remained in proper portrait mode ... even the MK set-upo screen is in landscape ... I could not find a way to stop this annoying feature so I bailed on it .... if the screen orientation would just behave properly, I would be much happier to try it as a DD but constant landscape mode sucks BIG TIME .... any one, any one ???
***: PM sent blazewit

[Solved] From cm11 (4.4.2 or 4.4.4) to cm9

Hi all
Simple question. Can I do it directly by formating every partition and then install cm9 or I have to get into download mode.
Sent from my GT-I9000 using XDA Free mobile app
trotos said:
Hi all
Simple question. Can I do it directly by formating every partition and then install cm9 or I have to get into download mode.
Sent from my GT-I9000 using XDA Free mobile app
Click to expand...
Click to collapse
first of all the roms from cyanogen mod is provided as installable zip
not a odin package
if you are on kitkat thats not a matter.
then you can use philz touch or twrp to make a full wipe
and install the cm9 downloaded package
Junaid1460 said:
first of all the roms from cyanogen mod is provided as installable zip
not a odin package
if you are on kitkat thats not a matter.
then you can use philz touch or twrp to make a full wipe
and install the cm9 downloaded package
Click to expand...
Click to collapse
Sorry for my misleading. By using oding I was just referring to the fact of going back to gingerbread original ROM and also doing a /512 partition.
I need to know of someone has done it successfuly. My home button is not working any more so it is not easy to get into download mod if I brick the i9000.
BTW... Best phone ever. I've changed 2 girlfriends but this phone is still with me
Sent from my GT-I9000 using XDA Free mobile app
Anyone???
Sent from my GT-I9000 using XDA Free mobile app
trotos said:
Anyone???
Sent from my GT-I9000 using XDA Free mobile app
Click to expand...
Click to collapse
I've been back and fourth between 4.4 4.3 4.2 etc.. I do full wipes including system and flash an official cm package like cm9 reboot recovery flash cm again to be sure. Full wipes again then flash whatever ROM I want. I always flash official cm before flashing another another ROM to adjust partition table.
Sent from my GT-I9000 using Xparent Skyblue Tapatalk 2
---------- Post added at 03:07 PM ---------- Previous post was at 02:32 PM ----------
trotos said:
BTW... Best phone ever. I've changed 2 girlfriends but this phone is still with me
Click to expand...
Click to collapse
+1000!
I've just fixed the motherboard of my old S1 and started using it again after using a HTC One mini for 8 months. The phone was a piece of crap and so are HTC! They have me a HTC One M7 for my troubles but was too little to late. Samsung forever!
In time I may upgrade to the S2 for the extra ram, but I'll be sticking with my trusty S1 till then.
Sent from my GT-I9000 using Xparent Skyblue Tapatalk 2
This is the information I was looking.
Excellent. Thank you very much
Sent from my GT-I9000 using XDA Free mobile app

Categories

Resources