Hi,
My Razr I got stuck at the Red boot animation a few days ago. Its the animation of the red logo and intel logo and not the static M logo that comes at the start.
In detail, the phone shows the M animation where the waves are shown, sometimes it even shows the the intel animation and then returns to the animated M logo (Please note that it does not reboot and the static red logo does not appear). The phone keeps on doing this until I turn off the phone using the fastboot menu. Sometimes the phone passes the boot animation and turns on for about a couple of minutes until it starts happening again.
The phone has a locked boot-loader and is unrooted. Its on Stock 4.1.2 unrooted rom. Previously the phone used to have the problem of being stuck at the static M logo but @skupi20 found a workaround which was to use RSD lite and the stock rom and flash the system_signed file by editing the xml file. This used to fix the problem whenever it occurred. but flashing system_signed does not fix this problem. I have even tried flashing everything except for the erase_userdata phrase(I do not want to lose the data). The link to the previous problem's solution is http://forum.xda-developers.com/showthread.php?t=2420032
I think the problem is not in the system files anymore thats why flashing it does not work. And as the phone does work sometimes it means something is causing the system to be stuck at the animation most of the time.
I would also like to mention that the phone has also booted to safemode a few times but it kept on saying Homescreen has stopped working so I couldn't do anything. I tried opening the settings and it said Sattings stopped working and closed it too.
Any help would be greatly appreciated and I would be really thankful. Ihave tried to explain everything in detail but ask me if there is any other question.
Can anybody maybe help me understand what each of the partitions are for in the stock rom's xml file. Or maybe direct me to another thread where it is already explained. Thanks.
Since nobody said anything. I erased userdata(So had to lose all data) as well and it works fine now. I flashed a complete stock version of the Rom.
Was on vacation, so i would not reply to it. But the userdata erase was the only solution
Okay then you can take a pass since you were on vacation.
I Got The same problem my device is stuck on boot loop
i flashed the theme and then my device is still on droids eye
RSD lite 6.1.4 wont recognizing my device
help ME
Coolbilal said:
I Got The same problem my device is stuck on boot loop
i flashed the theme and then my device is still on droids eye
RSD lite 6.1.4 wont recognizing my device
help ME
Click to expand...
Click to collapse
hmm, i am wondering, do u have a xt890. This device doesn't have a droid eye But it has a red motorola logo or a unlcok message.
Anyway, can u access fastboot? Do u have an unlocked bootloader? If u can access fastboot, can u boot in recovery.
Hazou said:
hmm, i am wondering, do u have a xt890. This device doesn't have a droid eye But it has a red motorola logo or a unlcok message.
Anyway, can u access fastboot? Do u have an unlocked bootloader? If u can access fastboot, can u boot in recovery.
Click to expand...
Click to collapse
yes i can access fastboot and also have unlocked bootloader
i have xt907
Coolbilal said:
yes i can access fastboot and also have unlocked bootloader
i have xt907
Click to expand...
Click to collapse
Ah, that explains it a bit.
This is the xda forum for your device (Razr M). For a better fix to your problem u should ask there
http://forum.xda-developers.com/droid-razr-m
If u can't get any answer from there, i will try to help you further. But i don't have your device.
Contact me here again then
Hazou
Hazou said:
Ah, that explains it a bit.
This is the xda forum for your device (Razr M). For a better fix to your problem u should ask there
http://forum.xda-developers.com/droid-razr-m
If u can't get any answer from there, i will try to help you further. But i don't have your device.
Contact me here again then
Hazou
Click to expand...
Click to collapse
Ok thanks
Hazou said:
Ah, that explains it a bit.
This is the xda forum for your device (Razr M). For a better fix to your problem u should ask there
http://forum.xda-developers.com/droid-razr-m
If u can't get any answer from there, i will try to help you further. But i don't have your device.
Contact me here again then
Hazou
Click to expand...
Click to collapse
He did post over there in a few places also... Provided the same almost "details"... Just waiting on his reply
We cannot teach people anything; we can only help them discover it within themselves.
Related
Hello, folks!
I have a Milestone with stock android (2.1 I guess, after an OTA update from the provider) that was in the drawer for ca. 2 years because the POWER/VOL/CAM flat cable was bad. I changed the cable, was able to boot normally one or twice.
Now the phone freezes with the white motorola symbol.
When I turn it on with PWR + D-pad UP, I get into the bootloader v. 90.73.
Werid thing is that when I try to boot into recovery (PWR + CAMERA), I still get into the bootloader, so I can't get into recovery to try installing another rom to circumbent the boot lock-up.
Ideas to solve this?
Thanks!
It seems like your bootloader is corrupted.
If i were you, i would upgrade it to the latest version (90.78) and try with it.
(Also you should consider using CM7 or even CM10.)
Thanks!
How can I upgrade the bootloader? Is there a zip or an img file somewhere to push?
I dont know exactly, i didnt have to do it before.
I'm pretty sure, you can brick your device with this if something goes wrong.
I think you will need the following:
-Drivers
-RSDLite
-proper SBF file from here
But i dont know if you need to boot into bootloader mode or something.
Please, be very-very careful, maybe you should wait if someone with more knowledge gives you any advice.
Erovia said:
-proper SBF file from here
Click to expand...
Click to collapse
Thanks! I'll try to flash a newer bootloader.
Nope, Didn't work.
Still freezing on boot.
Sorry, but i'm out of ideas.
Maybe someone with more knowledge could help.
Good luck.
Erovia said:
Sorry, but i'm out of ideas.
Maybe someone with more knowledge could help.
Good luck.
Click to expand...
Click to collapse
Well, thanks anyway.
Did you manage to get the Device manage to take the new boot loader via usb?
If it did load the SBL try loading the vulnerable recovery sbf then put open recovery on to your SD card. If you can get that fair then I'd imagine you could load a new OS on to it without much issue. Lots of guides out there.
motorola xt3
motorola xt3 usb diver win xp plz
recently after i flashed a rom, i press reboot, then the screen shows nothing, not even the HTC logo (it might have booted, just not showing anything, i hear it vibrate), i wait for 20 mins but screen still doesn't show anything, tried flashing different roms but still the same! Any idea why?
also the bootloader doesn't show up on the screen, i have to guess whether recovery might be selected and only recovery shows up..
.jRay. said:
recently after i flashed a rom, i press reboot, then the screen shows nothing, not even the HTC logo (it might have booted, just not showing anything, i hear it vibrate), i wait for 20 mins but screen still doesn't show anything, tried flashing different roms but still the same! Any idea why?
also the bootloader doesn't show up on the screen, i have to guess whether recovery might be selected and only recovery shows up..
Click to expand...
Click to collapse
Your device s-off? If not you have to
fastboot flash boot boot.img on command prompt pc.
Yoo Momma Ass!!
OH，if you can not even get your screen on,then there may be something wrong with the hardware
I dont know but somehow its working now, though i cannot see the boot anim and sometimes doesnt boot, scared as **** to flash another rom
[email protected] said:
OH，if you can not even get your screen on,then there may be something wrong with the hardware
Click to expand...
Click to collapse
display works in revovery, so not a hardware issue!
zulmajdi said:
Your device s-off? If not you have to
fastboot flash boot boot.img on command prompt pc.
Yoo Momma Ass!!
Click to expand...
Click to collapse
Its soff
Sent from my HTC Incredible S
U can check unbrick project post using linux...may be that can do the magic..
Sent from my HTC Incredible S using xda app-developers app
link to the unbrick project please?
please help me to get rid of this problem i am facing this problem third time my phone stuck in bootloop just show htc logo and again reset with vibrate.
unable to go to recovery unable to factory reset when try to go in recovery again stcuk at boot loop showing htc logo same at factory reset. but able to go in boot loader i install stock rom.. installed successfully but again stuck at bootloop..
before this phone stuck at startup many time but automatically become normal after one or two days. now its stucked again at bootloop..
is this problem can solve with j-tag or sme hardware problem i have tried another battery but same problem..
tauqeer512 said:
please help me to get rid of this problem i am facing this problem third time my phone stuck in bootloop just show htc logo and again reset with vibrate.
unable to go to recovery unable to factory reset when try to go in recovery again stcuk at boot loop showing htc logo same at factory reset. but able to go in boot loader i install stock rom.. installed successfully but again stuck at bootloop..
before this phone stuck at startup many time but automatically become normal after one or two days. now its stucked again at bootloop..
is this problem can solve with j-tag or sme hardware problem i have tried another battery but same problem..
Click to expand...
Click to collapse
i guess might be issue with boot image...
u need to flash that through command window... that's what i believe is the issue... have had that thing happen to me earlier on an HTC Inspire.. needed to flash the image file separately infact...
alokated said:
i guess might be issue with boot image...
u need to flash that through command window... that's what i believe is the issue... have had that thing happen to me earlier on an HTC Inspire.. needed to flash the image file separately infact...
Click to expand...
Click to collapse
Dear alokated!
bundle of thanks for your quote on my post i post this 2nd time....but on first postno reply....Thanks Again//
i will flash the boot image hope this will solve the problem..
i will get back to you after flashing....
Thanks
Tauqeer
tauqeer512 said:
please help me to get rid of this problem i am facing this problem third time my phone stuck in bootloop just show htc logo and again reset with vibrate.
unable to go to recovery unable to factory reset when try to go in recovery again stcuk at boot loop showing htc logo same at factory reset. but able to go in boot loader i install stock rom.. installed successfully but again stuck at bootloop..
before this phone stuck at startup many time but automatically become normal after one or two days. now its stucked again at bootloop..
is this problem can solve with j-tag or sme hardware problem i have tried another battery but same problem..
Click to expand...
Click to collapse
If your phone isn't s-off you will need to flash kernel from fastboot. Well sometimes it works without and sometimes it doesn't
Sent from my Find 5 using XDA Premium HD app
anders3408 said:
If your phone isn't s-off you will need to flash kernel from fastboot. Well sometimes it works without and sometimes it doesn't
Sent from my Find 5 using XDA Premium HD app
Click to expand...
Click to collapse
i tried stating the same, but not quite efficiently
if the phone is s-on,, you need to flash boot.img separately via fastboot
anders3408 said:
If your phone isn't s-off you will need to flash kernel from fastboot. Well sometimes it works without and sometimes it doesn't
Sent from my Find 5 using XDA Premium HD app
Click to expand...
Click to collapse
Dear!
my phone's S-off boot-loader unlocked.....
tauqeer512 said:
Dear alokated!
bundle of thanks for your quote on my post i post this 2nd time....but on first postno reply....Thanks Again//
i will flash the boot image hope this will solve the problem..
i will get back to you after flashing....
Thanks
Tauqeer
Click to expand...
Click to collapse
I sent you a PM Tauqeer. Read and respond mate.
anders3408 said:
If your phone isn't s-off you will need to flash kernel from fastboot. Well sometimes it works without and sometimes it doesn't
Sent from my Find 5 using XDA Premium HD app
Click to expand...
Click to collapse
Hell sir! i install ruu ICS for Europe - 2.31.401.2 from the list of stock rom that you provide http://forum.xda-developers.com/showthread.php?t=2128104 on advice of "farahassankhan"
my phone is SuperCID 11111111
s-off and bootloader is relocked..
now its not on boot-loop phone stuck on only green htc logo on white screen what possible solution for this...
Looking forward
Thanks
Tauqeer
There was no s-off for the sxl
From the past
JustPlayingHard said:
There was no s-off for the sxl
From the past
Click to expand...
Click to collapse
sxl has s-off. juopunut bear has provided it long ago.
Hello... I seem to have bricked my phone but it's a weird brick. I tried a new ROM since I was having problems with my old one, and it got stuck on a reboot loop. I just didn't know what to do and (very stupidly, in retrospective...) just wiped the system partition. Now of course I can't access xRecovery (to be fair, they warned against doing that) and I don't remember if I had CWM installed at the time.
The phone was rooted, stock kernel.
Now, I can boot the phone and get stuck on Sony Ericsson logo... so far so good. But when I try to get it into flash mode, it won't boot. Is there anything I can do to un-brick it?
I tried Flashtool, PCC and SEUS. But since I can't boot into flash mode, it doesn't work.
If there's any more info I can provide please tell me and I will.
Thanks a lot.
Have you tried with flashtool as described in this post: http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2 ?
stamatis said:
Have you tried with flashtool as described in this post: http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2 ?
Click to expand...
Click to collapse
Yes, I tried Flashtool, SEUS and PCC. I un-bricked it from soft bricks quite a few times. But I can't now because I can't boot on flash mode.
TheDogWithoutFear said:
Hello... I seem to have bricked my phone but it's a weird brick. I tried a new ROM since I was having problems with my old one, and it got stuck on a reboot loop. I just didn't know what to do and (very stupidly, in retrospective...) just wiped the system partition. Now of course I can't access xRecovery (to be fair, they warned against doing that) and I don't remember if I had CWM installed at the time.
The phone was rooted, stock kernel.
Now, I can boot the phone and get stuck on Sony Ericsson logo... so far so good. But when I try to get it into flash mode, it won't boot. Is there anything I can do to un-brick it?
I tried Flashtool, PCC and SEUS. But since I can't boot into flash mode, it doesn't work.
If there's any more info I can provide please tell me and I will.
Thanks a lot.
Click to expand...
Click to collapse
Dude looks like it just a soft brick ... u can download the official firmware for this model and try to flash it from flashtool..power off phone, hold back button key left on right side and connect the USB to PC at the same time,... PC will detect your phone and turns to blue light..
In my case i totally ****ed up when i tried to unlock the bootloader. Now my phone is totally dead.. can't go to falshmode, phone won't start at all... but in your case at least your phone is turning on in sony ericsson logo which means its just a soft brick ...
heerarana said:
power off phone, hold back button key left on right side and connect the USB to PC at the same time,... PC will detect your phone and turns to blue light..
Click to expand...
Click to collapse
That is called booting to flash mode, and that's what my phone can't do... the main reason I'm posting here.
TheDogWithoutFear said:
Hello... I seem to have bricked my phone but it's a weird brick. I tried a new ROM since I was having problems with my old one, and it got stuck on a reboot loop. I just didn't know what to do and (very stupidly, in retrospective...) just wiped the system partition. Now of course I can't access xRecovery (to be fair, they warned against doing that) and I don't remember if I had CWM installed at the time.
The phone was rooted, stock kernel.
Now, I can boot the phone and get stuck on Sony Ericsson logo... so far so good. But when I try to get it into flash mode, it won't boot. Is there anything I can do to un-brick it?
I tried Flashtool, PCC and SEUS. But since I can't boot into flash mode, it doesn't work.
If there's any more info I can provide please tell me and I will.
Thanks a lot.
Click to expand...
Click to collapse
if you have unlocked bootloader.
try this. it should go into flash mode this way.
launch flashtool. select some kernel. alfs or nAa.
take the phone battery out. connect the usb and then put in the battery immediately.
it should start flashing the kernel. then you can use the cwm integrated in the kernel
CnC-ROCK said:
if you have unlocked bootloader.
try this. it should go into flash mode this way.
launch flashtool. select some kernel. alfs or nAa.
take the phone battery out. connect the usb and then put in the battery immediately.
it should start flashing the kernel. then you can use the cwm integrated in the kernel
Click to expand...
Click to collapse
Thanks! But I don't have unlocked bootloader, mine is one of the ones you can't unlock safely
TheDogWithoutFear said:
Thanks! But I don't have unlocked bootloader, mine is one of the ones you can't unlock safely
Click to expand...
Click to collapse
try the same method with seus instead of flashtool
CnC-ROCK said:
try the same method with seus instead of flashtool
Click to expand...
Click to collapse
Well... I don't know how since it wasn't working, but I got it to boot in flash mode with SEUS... but it says it doesn't have any software available for my device? Both in SEUS and PCC.
TheDogWithoutFear said:
Well... I don't know how since it wasn't working, but I got it to boot in flash mode with SEUS... but it says it doesn't have any software available for my device?
Click to expand...
Click to collapse
that was the point.. to boot into flash mode
:silly:
http://forum.xda-developers.com/showthread.php?t=1597268
get it to flash mode however you got it. seus or battery removal method and then
follow from step C. download the rom in post and install using flashtool
---------- Post added at 07:16 PM ---------- Previous post was at 07:13 PM ----------
or follow this now
http://forum.xda-developers.com/showthread.php?t=1356349
CnC-ROCK said:
that was the point.. to boot into flash mode
:silly:
http://forum.xda-developers.com/showthread.php?t=1597268
follow from step C. download the rom in post and install using flashtool
Click to expand...
Click to collapse
I imagined xD. I just tried with that too.
With flashtool, it gets stuck on "Reading device information" (I wanted to post edit and post this but the forum didn't let me xD). I'll let it try a little bit longer, but it's been a while.
TheDogWithoutFear said:
I imagined xD. I just tried with that too.
With flashtool, it gets stuck on "Reading device information" (I wanted to post edit and post this but the forum didn't let me xD). I'll let it try a little bit longer, but it's been a while.
Click to expand...
Click to collapse
if it fails for any reason then try flashing older baseband and then try seus. i dont remember if flashing baseband requires unlocked bootloader but its worth the effort
CnC-ROCK said:
if it fails for any reason then try flashing older baseband and then try seus. i dont remember if flashing baseband requires unlocked bootloader but its worth the effort
Click to expand...
Click to collapse
Okay, it's been stuck for about an hour. Tried flashing the older band, it gets stuck on "reading device..." too.
TheDogWithoutFear said:
Okay, it's been stuck for about an hour. Tried flashing the older band, it gets stuck on "reading device..." too.
Click to expand...
Click to collapse
try the repair option in seus if its still there.
i once got into this situation had to keep trying seus till it stopped showing the "no software update found" or whatever it is. keep trying with seus. its your only free hope.
Try different basebands...
AlchemistDS said:
Try different basebands...
Click to expand...
Click to collapse
desperate to get 10 posts? it was already suggested. please read before posting.
This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=817550096634767393 (SC02HOMU1BQC5 Nougat)
TWRP 3.1.1: https://www.androidfilehost.com/?fid=673791459329056265
HKROM V2: https://www.androidfilehost.com/?fid=817550096634771123
HKernel for hero2qltedcm V2 (June):https://www.androidfilehost.com/?fid=961840155545571333
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/test-tw-7.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969
Really amazing developer I've met!
Thank you so much @travis82
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
gAracUh said:
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
Click to expand...
Click to collapse
twrp 3.0.3 https://www.androidfilehost.com/?fid=817550096634747128
This recovery working for you? Others stated the one in the op works just fine, but since I do not have this device to test personally I can only go off of what users say.
it's working for me, after i flash the ROM i think my phone got bootloop that's why i boot again to download mode but when i tried to flash stock rom it gives a fail. now my phone stuck on led blue light and "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color). i need to wait to drain the battery and try if i can boot to download mode again.. i'm afraid if i can't access download mode again or recovery.
You guys are remembering to format data on a new twrp install or a new os version install? 6-7,7-8 get it? These roms or recoverys will not brick the devices I made them for kinda impossible.
You do know a brick right? Brick = no power nothing just a pricey paperweight.
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
gAracUh said:
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
Click to expand...
Click to collapse
did u unlock your bootloader? sounds like you did not.
it won't my phone to unlock bootloader everytime i run CROM it closes automatically. until now i can't believe my phone was bricked and i don't have any idea to fix this without download mode. even if i bring this to service center i think they will not to accept my phone because my warranty is already void.
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
ch0c0lateb0yctg said:
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
Click to expand...
Click to collapse
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
travis82 said:
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
Click to expand...
Click to collapse
shame....i was starting to like this blue coral version...still happy though...been using s7 black for a while now.
Kernel updated to V2 with June cve patches etc.. check changelogs in 1st post.
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
mavin11 said:
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
Click to expand...
Click to collapse
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
baobeatmaker said:
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
Click to expand...
Click to collapse
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
mavin11 said:
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
Click to expand...
Click to collapse
You need to let the phone boot about 15-20mins bro.
You just need more patient.
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
baobeatmaker said:
You need to let the phone boot about 15-20mins bro.
You just need more patient.
Click to expand...
Click to collapse
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
mavin11 said:
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
Click to expand...
Click to collapse
it's really normal. Mine shown that too.