Stock Camera HDR Brightness Settings - One (M7) Q&A, Help & Troubleshooting

I have my One since some time and I'm quiet happy with it. Only the HDR camera mode drives me crazy. Maybe some of you have already noticed that once the (stock) camera app is put to HDR mode it increases the overall brightness of the picture. I hate that cause it makes most HDR pictures too bright and I do have to manually find a really bright spot so the camera lowers the brightness again(and then fix ae and af(which is blocking a refocus...)). Now since I'm quiet sure someone already tried to modify the stock camera app(4.4.2 Sense6) I would like to know wether it's possible to lower the brightness or even turn this modification of without completely recompiling the camera app. Any suggestions are appreciated. Thanks.
Binux-project

Related

TyTN II choppy/laggy main camera but fast/quick 2ndary camera?

So I was playing around and I noticed that when using the main camera it was really choppy, but when I used the secondary camera it was fine, this is for both photos and videos. But out of fluke one time today the main camera had no lag...
So when recording video it's really choppy and photos if I move even the slightest it blurs =/ it's not quick refresh at all.
Using the secondary camera it seems to be very quick and recording videos is fast, not choppy at all.
Any solutions?
After some quick searches I Found this is a common problem...but doesn't answer my question how I got it to work perfect under the same conditions (I was inside the whole time same light conditions)
*shrugs*
The primary camera lags because it shifts into night mode when there is low light so as to get as much light into the lens. Trust me, try going outside when it's quite bright or something and the camera will be sooth as silk
Some people hate this feature though. Not sure if you can switch this "quirk" off so it only happens manually.
LeShin said:
The primary camera lags because it shifts into night mode when there is low light so as to get as much light into the lens. Trust me, try going outside when it's quite bright or something and the camera will be sooth as silk
Some people hate this feature though. Not sure if you can switch this "quirk" off so it only happens manually.
Click to expand...
Click to collapse
That's the funny thing though...it was perfectly fine after this 'glitch' happened haha...in the same light conditions, I'm trying to make that happen all the time

Camera Temp Fix Issue

So i updated to the my tilt to Duttys Apr 1st rom, and since then, my camera is very slow on the FPS. I reinstalled the Camera 5.0.4.2915 fix, but no luck. So in reading, i found that if i turned on the camera, then hit the power button, then placed my hand over the camera lense, then hit the power button, i get much better FPS. But after i turn off the camera, the FPS goes back to very poor (so where everything is blurry). Does anyone have any ideas for a fix for this?
Thanks
This has been around for ages. All it does is stop the cameras light meter working, so it is locked to one exposure. It means you might get a dark picture, rather than a blurry one.
I wonder if the root of the problem is that the camera doesn't support a variable ISO speed? On my k750i, as it got darker the camera boosted the ISO resulting in grainier (but lighter) images. Looks like the our TYTN IIs might be locked to a single ISO speed, with only adjustments to the exposure time being made to compensate for darkness.

[Q] How to disable focus flash light?

Hi, is there any way to disable the pre-focus flash light on the S3 Mini? I'm referring to the feature of the flash light being activated while the camera get focus.
The problem is that the light is too bright and people get blind after being lighted for about 2 seconds while the camera focus.
I can only see 3 settings for the flash: disabled, enabled, automatic
'Disabled' works but, of course, it also disables the flash when actually taking the picture and this is bad on low light conditions.
I don't want to give up the whole flash, just the focus flash light. For me, the best solution would be a setting for "Enable/disable focus light". This way I can decide to turn it off when taking front-facing pictures of people, so the flash light only activates for an instant when actually taking the picture. For taking pictures of objects, the focus light is fine.
Any ideas, suggestions? Thank you.
I think the focus light is required by camera itself in order to make a decision of what object that needs to be focused in low bright environment.
Dikirim dari GT-I8190

tips for clearer shooting in low light to dark, night shots

As we all know by now, all camera reviews say our S5 has sub par night shooting. The thing is if we have our default settings on, this is absolutely true. I believe default has ISO on Auto and image stabilization ON. If you notice night shots are blurry as hell and we lose lots of detail even if we hold the phone absolutely still. This is because Auto ISO, I believe, is digitally ramped super high past ISO 800 in order to have a quick shutter speed. This causes less details to be taken in, in trade for brighter night shots.
This is the easiest way to get much better night shots and I wish reviewers tried this in their camera reviews for smartphones. See examples below of:
1. auto image stabilization with auto ISO
2. ISO 800
MUCH BETTER. notice that with auto settings on, it artificially brightens the entire shot, the night sky is forced to be brighter and you notice lots of noise near the horizon. the carnival lights are over exposed and details are not present.
notice the manual ISO shot, the night sky is correctly a pure black, and the lights are not over exposed so it leaves a crisp detail.
TL;DR: deactivate image stabilization so you can manually adjust ISO. Instead of Auto ISO, choose 800 for crisper, more detailed night shots.
next tip in the near future: shooting people in dark lighting
chillsen said:
As we all know by now, all camera reviews say our S5 has sub par night shooting. The thing is if we have our default settings on, this is absolutely true. I believe default has ISO on Auto and image stabilization ON. If you notice night shots are blurry as hell and we lose lots of detail even if we hold the phone absolutely still. This is because Auto ISO, I believe, is digitally ramped super high past ISO 800 in order to have a quick shutter speed. This causes less details to be taken in, in trade for brighter night shots.
This is the easiest way to get much better night shots and I wish reviewers tried this in their camera reviews for smartphones. See examples below of:
1. auto image stabilization with auto ISO
2. ISO 800
MUCH BETTER. notice that with auto settings on, it artificially brightens the entire shot, the night sky is forced to be brighter and you notice lots of noise near the horizon. the carnival lights are over exposed and details are not present.
notice the manual ISO shot, the night sky is correctly a pure black, and the lights are not over exposed so it leaves a crisp detail.
TL;DR: deactivate image stabilization so you can manually adjust ISO. Instead of Auto ISO, choose 800 for crisper, more detailed night shots.
next tip in the near future: shooting people in dark lighting
Click to expand...
Click to collapse
What park is that? Looks like the one near me, is that roller coaster the crazy mouse? Lmao.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Impressive, that's a nice shot.
not bad
thanks for the tip the delay sucks anyway to get rid of that?
What about during the day, I have it on auto but imagine stabilization off. would 800 iso be fine for the day? Or is there a better setting for the day, I just leave it on auto b/c I don't want deal with remembering to change it back and forth lol.
surf1 said:
What about during the day, I have it on auto but imagine stabilization off. would 800 iso be fine for the day? Or is there a better setting for the day, I just leave it on auto b/c I don't want deal with remembering to change it back and forth lol.
Click to expand...
Click to collapse
for the day, auto is fine because there is so much bright light it will automatically be able to keep the iso low like 100-400 and still have a quick shutter. if you want super clear crisp pictures, try ISO 100 but depending on how bright it is, you might get blurry photos because the shutter will have to compensate by being open longer.
if you know the basic relationships between shutter speed and aperture, you'll know that our aperture is only 1 setting. so the only thing we can do to brighten pictures is to have a long shutter time (which is bad bc if you move it will get blurry) or change the ISO speed (higher iso, enables quicker shutter speed but sacrifice details).
galaxy s4 nutjob said:
thanks for the tip the delay sucks anyway to get rid of that?
Click to expand...
Click to collapse
the delay isn't actually a delay but its how long the shutter of the camera is open for (taking in enough light to form the picture). Since it's dark and the ISO is at 800 there will be a longer shutter speed. if you listen carefully you will hear 2 noises, one at the beginning, then the delay, then another sound. those two sounds are when the shutter is opening and when it closes back after it has enough light to create a picture.
another way for you to understand this is try iso 100, it will be a longer delay and the picture will come out way too underexposed (darker) because it can't capture enough light while the shutter is open.
however if you have a nice digital camera you can take great night shots with a tripod at low ISO speeds, since you can manually set how long you want the shutter to be open for.
Br4nd3n said:
What park is that? Looks like the one near me, is that roller coaster the crazy mouse? Lmao.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
this was at the annual fair in virginia

Notification Light

The Realme 6 pro does not have a dedicated notification light but maybe we can use the light that flashes when we switch from the back camera to the front camera from the camera app. Any way this can be achieved ?
Yes.. but it would be pointless due to the fact that it is a LCD screen which will cause the whole screen to light up everytime you receive a notification and thus draining your battery a lot faster.. same reason this phone doesn't have an Ambient display..
I agree. But atleast those who want to use they feature they could.
Man, this IS an idea!
You know i never noticed that nice ring of light around selfie cam?
I fastly tried with "automate" app but I didn't find a way...
Any update on this?

Categories

Resources