Database Develop

[KERNEL] [CM-11] [7-3-2014] Moretz Kernel - Galaxy Note 8 Edition (N5100 & N5110)

Moretz Kernel 0.2.2 - Galaxy Note 8.0 Edition​GT-N5110 & GT-N5100​​
Features:
Linux 3.0.101
Frandom
Network speed enhancements
Dynamic read ahead
CPU OC to 1.8GHz
GPU OC to 533MHz
CPU Voltage Control (OV/UV)
Tuned ZZMoove CPU governor (removed all other governors)
Intelligent CPU core hot plugging
Touchboost control, set to 800MHz
ARM CPU topology
LCD frequency switching (40Hz on screen dim, 60Hz on active)
Intelligent GPU scaling (Mali GPU control)
Lots of other fixes/tweaks
Intelligent zipalign at boot (init.d)
Intelligent sql db optimization at boot (init.d)
So, what's so special here?
A few things actually. I grabbed various code bits from many well known developers and worked some of my own magic on this build. First, I bumped the kernel up to 3.0.101 (FINAL) form kernel.org as a base on top of the stock CM 11.0 kernel. Once I pushed all of the enhancements listed above, I focused on tuning ZZMoove to balance performance and battery. I believe I've succeeded in that realm, so all other governors have been removed. This is a flash and forget kernel package. That's what makes it special ... the users do not have to do any tuning, it works, and it works well.
Credits:
Faux123, Andy P, googyanas, psndna88, ryukuri, sbrissen, Cyanogenmod team and may others. Please let me know if I missed you.
Source Code:
https://bitbucket.org/carvsdriver/android_kernel_samsung_smdk4412 (Moretz-New Branch)
Standard Disclaimer:
By flashing this you hold the developer (car vs driver) and anyone else not responsible or liable for any damage to your device, up to and including hard bricking. Basically, there's no warranty - flash at your own risk.
This release is not affiliated to CyanogenMod or Cyanogen Inc. This is my own personal work with lots of kangs from others.
This was tested with CM-11 on a GT-N5110 device. Any other devices or ROMs may not work or exhibit poor behavior. That being said, I only support use of this kernel with CM-11 and the GT-N5110.
Requirements:
Device - Samsung GT-N5110
ROM - CyanogenMod 11.0​
XDA:DevDB Information
Moretz Kernel - Galaxy Note 8 Edition (N5110 & N5100), Kernel for the Samsung Galaxy Note 8.0
Contributors
car vs driver, psndna88, faux123, googyanas, AndiP, sbrissen
Kernel Special Features: GPU/CPU OC, UV/OV, UKSM, HotPlug, ARM Topology, LCD Freq Scaling, Linux 3.0.101
Version Information
Status: Stable
Current Stable Version: 0.2A
Stable Release Date: 2014-03-21
Created 2014-03-21
Last Updated 2014-07-03

Change Log:
Moretz 0.2.2 -- Upstream CM11.0 Changes Merged -- 7.4.2014
98865a3: n_tty: Fix n_tty_write crash when echoing in raw mode
7735075: mc1n2: Allow swapping of microphone ADC channels
ed8b659: smdk4412: update sound soc and codecs
5e96596: d710: build stage2 initramfs into kernel
8a5d38c: Fix CVE-2014-3153
6922ae0: Merge "synaptics_s7301: add disabling keypad" into cm-11.0
daf9635: Merge "smdk4412: cypress-touchkey - add keydisabler" into cm-11.0
fd94358: n_tty: Fix n_tty_write crash when echoing in raw mode
969b384: mc1n2: Allow swapping of microphone ADC channels
eba4e20: smdk4412: update sound soc and codecs
Moretz 0.2.1 -- Upstream CM11.0 Changes Merged -- 4.8.2014
c0dce37: dm crypt: optionally support discard requests
15b6c83: dm table: share target argument parsing functions
1886fef: dm: ignore merge_bvec for snapshots when safe
2b791d9: dm: suppress endian warnings
Moretz 0.2a -- Initial Release -- 3.21.2014
Instructions:
1. Download the flashable zip
2. Reboot into recovery
3. Flash the zip
4. Reboot
5. Done
I like to make things simple. Let your device boot up and that's it. No configuration necessary. But, if you want to screw with the CPU governor and ZZMoove settings, I made that easy for you. Just edit the zzmoove file in your init.d directory with the settings you want and reboot.​
Click to expand...
Click to collapse
Code:
[CENTER][SIZE="5"][COLOR="Magenta"][B]GT-N5110 Download link:[/B][/COLOR][/SIZE]
[url]http://d-h.st/Gkd[/url]
[B]Version[/B]: Moretz-0.2.2
[/CENTER]
Code:
[CENTER]
[SIZE="5"][B][COLOR="magenta"]GT-N5100 Download link:[/COLOR][/B][/SIZE]
[url]http://d-h.st/ZyZ[/url]
[B]Version[/B]: Moretz-0.2.2
[/center]
Just a couple more things ...
Please do not post mirrors, if one is needed just let me know and I'll post one.
Please leave a review on this project by clicking here.
If you like my work, feel free to buy me a beer or pack of guitar strings by donating.
Click to expand...
Click to collapse
[/CENTER]

How to properly report bugs:
When reporting a bug, you must provide me with some very specific information so that I am able to either reproduce the problem or diagnose it based on logs. If you cannot provide information that I need, I cannot attempt fix the issue.
If the device is crashing:
Please make a copy of your last_kmsg immediately after rebooting the device.
Please make a copy of your logcat for the subsequent reboot.
Attach both files to your bug report and specifically state exactly what happens (are there steps to reproduce it?).
In all cases, please provide a logcat of when the issue occurs or specifically describe what is happening and how you can reproduce the error.
If you have any current issues prior to flashing my kernel, don't expect me to fix them.
The more detail you provide, the more helpful your bug report will be for me.
Feature Requests:
I'll make this one easy, I don't do feature requests. I used to do that, it became a real pain in the ass to keep everyone happy and the project I was working on bug free. Put simply, I put this together to work specifically for me and then decided to share it here. If at some point I decide to add new features, then I'll release new versions to you.

car vs driver said:
Reserved just in case.
Click to expand...
Click to collapse
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.

ztotherad said:
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
Click to expand...
Click to collapse
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app

car vs driver said:
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
freakin' nice. definitely can't wait then! thanks again for your awesome gift to the Note 8.0 family.

is n5100 model will be supported in next future ?

messi2050 said:
is n5100 model will be supported in next future ?
Click to expand...
Click to collapse
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.

as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it

redukt said:
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
Click to expand...
Click to collapse
I suppose it should, I did a quick check and looks like that ROM uses the same base 3.0.y kernel that CM 11.0 does. The partition scheme on the devices is the same too (both devices us /dev/block/mmcblk0p5 for the boot partition) ...
There's only one real way to find out though, someone has to flash it - worst case is that it doesn't boot up.
Go ahead and give this a rip and let me know how it goes. It's the same build as the OP with the 5100 defconfig updated to include the features that I added for the 5110.
Download:
REMOVED ... SEE OP FOR DOWNLOADS
MD5:
7864a8e5eb18321c2201cba314fc7a06
If it doesn't boot, just reflash your previous ROM - that'll replace this kernel with whatever one is included there.

Yeah, kernel runs nice So I`ll kept my device on standby, make a wow raid and check the battery stats
Thx for your hard work

Assuming all goes well, I'll update the op to state that both devices are supported and working.
Sent from my Nexus 5 using XDA Premium 4 mobile app

car vs driver said:
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
Click to expand...
Click to collapse
i'm using original rom 4.1.2 now so i can't test it sorry

3,5 h standby time loosing NOTHING in battery percentage - full 100% So I`ll check this tomorrow and report my results
edit: very nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit: bug: no 3g network :/

Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>

car vs driver said:
give this one a rip:]
Click to expand...
Click to collapse
3G runs now
Many thanks for your quick reply

Excellent. I'm going to update the OP and support both devices then. Thanks for the quick turn around with testing, I appreciate it.

does anybody tested it on AOSB rom?

lolek2382 said:
does anybody tested it on AOSB rom?
Click to expand...
Click to collapse
yeppp, runs with AOSB 1.3.2

car vs driver said:
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
Click to expand...
Click to collapse
3G is working on my N5100 did I download the updated file just install a few minutes ago oh thankyou for supporting our tab the the Devs on the the better

[KERNEL][AOSP/STOCK][3.4.104][03/10/14] Phantom Kernel r5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Some stuff to know about-!
Based on latest sources.
Updated to latest 3.4.104 upstream patches.
CPU Underclock up to 96 mhz.
Doubletap2wake bidirectional sweep2wake.
Universal KitKat rom support through anykernel updater script.
Merged many upstream patches.
Kexec hardboot support.
Patches to unix.
Powersuspend driver.
Stereo call recording support.
Use your Moto g as a USB keyboard or mouse. App- Play Store link
Sound Control.
Added high performance mode for headset.
Sweep2Dim driver.
Conservative devfreq driver.
Lots of other patches to devfreq and kgsl drivers.
Enabled hell load of more TCP congessions:
HTML:
* .westwood (default)
* .reno
*. bic
*. highspeed
*. hybla
*. htcp
*. vegas
*. veno
*. scalable
*. yeah
*. lp
*. illinois
Added frandom.
Added optimized ARM RWSEM algorithm.
System wide high priority power efficient workqueues for workqueue/PHYLIB/block/ASoC/regulator..
Compiled using latest Cortex A15 optimized Linaro 4.9 toolchain(smoothness redefined).
O4 optimizations.
Cortex A15 optimization flags.
Increased MM readahead to 256 kb.
LCD_KCAL with configurable kcal_min.
Vibrator intensity control.
Governors-
HTML:
interactive (default)
intelliactive (new)
conservative
ondemand
lionheart (new)
performance
ondemandplus (new)
intellidemand (new)
smartmax(new)
I/O Schedulers-
HTML:
row (default)
noop
deadline
cfq
bfq (new)
fiops (new)
sio (new)
tripNdroid
Added optimized AES and SHA1 routines.
....and much more stuff which I probably forgot. I am done with long and never ending features list, go ahead and check github.
P.S.S. Camera not working? No worry! Flash this- http://d-h.st/vHp
Toggles and controls for everything can be found in Trickster MOD app.
Issues-
-You tell.
Download link- http://forum.xda-developers.com/devdb/project/?id=5025#downloads
Instructions-
First flash a ROM if you haven't already as AOSP kernel is not provided in form of a boot.img
Flash zip through recovery
P.S. DO NOT POST BUG REPORTS IF YOU DIDN'T FLASH KERNEL ON A CLEAN INSTALL.
It is my request to you all that please do not spam the thread with general queries and Q&A. It is a development thread and only development related posts should be there.
GPL Compliance: https://github.com/shivamk11/android_kernel_motorola_msm8226/
Just a statement regarding kernel source: The Kernel Source is of course covered under GPL version 2. Free software does NOT mean no work or time was spent working on it. I have donated a large sum of my free time to this kernel. If you want to include my kernel in your project or use my source code, please mention it in your post, give proper credits.
Opensource does not mean 'Out-of-credit'
Thank you.
I would like to mention much more things but I don't like bloated OP's so I am keeping it short.
XDA:DevDB Information
Phantom Kernel, Kernel for the Moto G
Contributors
Shivam Kuchhal
Kernel Special Features: Stability is the best feature nowadays
Version Information
Status: Stable
Created 2014-07-19
Last Updated 2014-10-16

Reserved
Don't bother about asking these questions as I will ignore them:
What about CPU/GPU OC/UC/UV?
Useless patches.
Placebo effects.
Custom drivers.
Credits:
@RenderBroken @alin.p for their work on dt2w/s2w.
@savoca for his work on LCD_KCAL.
@skad00sh for banner.
Changelog:
v1:
Initial Release.

Reserved

Awesome...is there any plan of implementing cpu and gpu overclock along with fast charge?

I know you told all KitKat Roms are compatable I'm just still asking will it work with the official Paranoid Android

doomwithdon said:
Awesome...is there any plan of implementing cpu and gpu overclock along with fast charge?
Click to expand...
Click to collapse
Surprises are coming but can't confirm anything. Only features which prove to be stable in my testing will be there in final release of kernel.
siddharthnair96 said:
I know you told all KitKat Roms are compatable I'm just still asking will it work with the official Paranoid Android
Click to expand...
Click to collapse
Yep it works but make sure you're on latest build.

Thanks a lot mate...
Sent from my Moto G using XDA Free mobile app

will it work on stock 4.4.4 moto g rom?

siddharthnair96 said:
Thanks a lot mate...
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Do post a review after trying.
OldYellowBricks said:
will it work on stock 4.4.4 moto g rom?
Click to expand...
Click to collapse
Nope, BTW thanks for reminding me. Added about it in OP.

Shivam Kuchhal said:
Do post a review after trying.
Sure once I reach home I'll flash use it for an hour and let you know... What's the normal battery drain ??
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse

Shivam Kuchhal said:
Do post a review after trying.
Nope, BTW thanks for reminding me. Added about it in OP.
Click to expand...
Click to collapse
Has anyone tried with stock 4.4.4?
Sent from my XT1033 (Brazilian stock on Indian purchase, updated to 4.4.4)

Seems good, gonna give a try on crDroid- B10 XT1033
Sent from my Moto G using Tapatalk

jigar.in said:
Has anyone tried with stock 4.4.4?
Sent from my XT1033 (Brazilian stock on Indian purchase, updated to 4.4.4)
Click to expand...
Click to collapse
Seems not for stock :good:

Installing a virus :laugh: It doesnt seem to work with c-rom (ver 7.1)...when i flash it and reboot, it is stuck at the google bootloader screen (I have the asian dual sim version converted to gpe):crying:

pfufle said:
Installing a virus :laugh: It doesnt seem to work with c-rom (ver 7.1)...when i flash it and reboot, it is stuck at the google bootloader screen (I have the asian dual sim version converted to gpe):crying:
Click to expand...
Click to collapse
Yeah C-ROM isn't updated from long time. Not my fault. Use any recently updated ROM.

Shivam Kuchhal said:
Yeah C-ROM isn't updated from long time. Not my fault. Use any recently updated ROM.
Click to expand...
Click to collapse
Okay i think ill flash cr droid and then post my thought on the kernel...But i have a noob question...(pardon me for that ): How does the C-ROM update have anything to do with the compatibility of the kernel?

Great, another awesome kernel, we have more and more concurrency here
BTW. Can u please share your github in first post? would be nice to see what magic was put into ur code
Cheers.

pfufle said:
Okay i think ill flash cr droid and then post my thought on the kernel...But i have a noob question...(pardon me for that ): How does the C-ROM update have anything to do with the compatibility of the kernel?
Click to expand...
Click to collapse
@dhacker29 recently updated adreno and GPS blobs and made changes in kernel for their compatibility. That's why old ROMs aren't booting with latest up to date kernels.
fabus said:
Great, another awesome kernel, we have more and more concurrency here
BTW. Can u please share your github in first post? would be nice to see what magic was put into ur code
Cheers.
Click to expand...
Click to collapse
You can find it in downloads tab, dev-db uses different layout for everything.

You can find it in downloads tab, dev-db uses different layout for everything.
Click to expand...
Click to collapse
No downloads tab (yet)
Downloading to test...
edit: bootloop on my build. (synced yesterday)
edit2: tried flashing Pink Kernel over it, same result.
Putting back my backup and will look at it later....

martinusbe said:
No downloads tab (yet)
Click to expand...
Click to collapse
Oh now I see whats going on. It was a mistake on my part, anyways here's the link- https://github.com/shivamk11/android_kernel_motorola_msm8226/

[KERNEL] [3.0.8] [22/03/15] DISCONTINUED ZEN-Kernel v1.0 (EMUI 2.3)

ZEN-Kernel for Huawei P7 Emui 2.3
Features:
Based on surdu_petrus hwp7 sources
Compiled with Sabermod 4.7
no set_immutable.list
init.d support enabled into ramdisk
zipalign all apps on every boot
tweaks database using sqlite3
Added Governors:
conserative, ondemand, powersave, interactive, performance
Added I/O Schedulers:
Sioplus, Zen
How to install:
Custom recovery is recommend! (CWM, TWRP)
Install via recovery and reboot
Download
MEGA
MD5:3fd691161f31a9c9f4dc2968aba0994f
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
GOOGLE
HUAWEI
XDA
Surdu_Petru
SaberMod
Source:
GitHub

What's the point to add cpu governors without hotplug support?
And by the way, Huawei has published newer kernel sources.

Kostyan_nsk said:
What's the point to add cpu governors without hotplug support?
And by the way, Huawei has published newer kernel sources.
Click to expand...
Click to collapse
For Wmui 2.3 or 3.0 ??

Kostyan_nsk said:
What's the point to add cpu governors without hotplug support?
And by the way, Huawei has published newer kernel sources.
Click to expand...
Click to collapse
because i don't like the hotplug governors and maybes others to, my battery life and performance is great with interactive
where did you find them? i only find the one that surdu_petru use...

andromodgod said:
For Wmui 2.3 or 3.0 ??
Click to expand...
Click to collapse
For 3.0
---------- Post added at 18:02 ---------- Previous post was at 17:48 ----------
Araca said:
because i don't like the hotplug governors and maybes others to, my battery life and performance is great with interactive
Click to expand...
Click to collapse
I was comparing stock pwrctrl_hotplug and interactive. Interactive drains more battery than stock.
Araca said:
where did you find them? i only find the one that surdu_petru use...
Click to expand...
Click to collapse
On official site, actually...
http://www.emui.com/nsp/geturl.php?path=P7.kernel.[Android4.4.2_EMUI3.0].tar.gz

Kostyan_nsk said:
For 3.0
---------- Post added at 18:02 ---------- Previous post was at 17:48 ----------
I was comparing stock pwrctrl_hotplug and interactive. Interactive drains more battery than stock.
On official site, actually...
http://www.emui.com/nsp/geturl.php?path=P7.kernel.[Android4.4.2_EMUI3.0].tar.gz
Click to expand...
Click to collapse
i got a link error on this ?

Don't click on link, copy whole string and paste in your browser.
Forum can't handle link properly because of [ ] symbols.

Kostyan_nsk said:
Don't click on link, copy whole string and paste in your browser.
Forum can't handle link properly because of [ ] symbols.
Click to expand...
Click to collapse
got it :
I got some compiling bugs but i had fix them . but build breaks every time with no error or something....

Araca said:
got it :
I got some compiling bugs but i had fix them . but build breaks every time with no error or something....
Click to expand...
Click to collapse
Some error is gonna be anyway.

Kostyan_nsk said:
Some error is gonna be anyway.
Click to expand...
Click to collapse
yes.... there where a lot but i have managed to fix them build a Custom-Kernel for EMUI 3.0
from the sources ! :highfive:
first release:
*Compiled with Sabermod 4.7
*no set_immutable.list
*init.d support enabled into ramdisk
*zipalign all apps on every boot
*tweaks database using sqlite3
Not booting now ! Will be fixed!
source goes up tomorrow on Github!

Araca said:
yes.... there where a lot but i have managed to fix them build a Custom-Kernel for EMUI 3.0
from the sources ! :highfive:
first release:
*Compiled with Sabermod 4.7
*no set_immutable.list
*init.d support enabled into ramdisk
*zipalign all apps on every boot
*tweaks database using sqlite3
Download:
MEGA
source goes up tomorrow on Github!
Click to expand...
Click to collapse
Flashed ....
After Recovery Stuck for a few seconds at boot logo then reboots and shuts down ..... Good Luck

andromodgod said:
Flashed ....
After Recovery Stuck for a few seconds at boot logo then reboots and shuts down ..... Good Luck
Click to expand...
Click to collapse
Sry ..i will later fix that btw. Can someone upload b609 Boot.IMG?
Sent from my p7_l10 using XDA Free mobile app

Araca said:
Sry ..i will later fix that btw. Can someone upload b609 Boot.IMG?
Sent from my p7_l10 using XDA Free mobile app
Click to expand...
Click to collapse
http://www58.zippyshare.com/v/l3N0UM0A/file.html
Sent from my HUAWEI P7-L10 using Tapatalk

I can not test this now because i'am on EMUI 2.3 , up- downgrading take to mush time so if someone is willing to test this here is the new boot.img. install via CWM.
zImage is compiled correct with no errors but maybe i need the right boot.img for this so we must test this! This was really hard work to fix all bugs i have spend about 3 hours for this
NOTICE: NO INIT.D SUPPORT AND SET.IMMUTABLES IS PRESENT! THIS A TEST!
CUSTOM KERNEL EMUI 3.0 (B609)
STOCK KERNEL EMUI 3.0 (B609)

is there any possibility to use the new kernel package for CM 12 (or 11) on P7 ?

l.capriotti said:
is there any possibility to use the new kernel package for CM 12 (or 11) on P7 ?
Click to expand...
Click to collapse
No, the old one is working
Today i was able to build CM 11 without errors for the p7. But it is bootlooping because of the sound problem what surdu_petru was talking about.
So I must search for the problem and maybe ask some one with more knowledge about huawei as @codeworkx
But when the build is booting we can then finally see how the system is running and how many bugs are in it.
Sent from my p7_l10 using XDA Free mobile app

Thank you for using your brain and your free time for our p7. Good work:thumbup:
Sent from my HUAWEI P7-L10 using XDA Free mobile app

Stoked!!
Seriously if anyone is able to build cm for our device I would travel to their house and ask that person te marry me!!! can't wait to see the development of this device start to bloom

Hi, i really like this kernel but...can you add overclocking, please? Thank You

luca3011 said:
Hi, i really like this kernel but...can you add overclocking, please? Thank You
Click to expand...
Click to collapse
i must look into this and this not without risk to oc the cpu....
Today i was able to boot into CM11:highfive:
but many bugs.......
systemui and mediaservice stops
no wlan, no signal, some app are forceclosing maybe because of systemui
and more that i have not testet now..
But SOUND
thx @codeworkx who helped me with my logcats :good:

[KERNEL][Stock 224/253][Z5C][6.0.x]OM5Z Kernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT responsible for any damage done to your device, your neighbor, or any other things you like/hate.​
Introduction:
@myself5 and I were in need for a custom stock kernel to mess with. Since all the available Options were not fitting our needs, or gave us bad experience on some aspects, and we knew about Zombie Kernel from Tom, we decided to start working on that. So I brought up support for the Z5, we ported Kexec to it, updated it to 224 and added various things. Since the kernel gave us very good experiences, we decided to make it accessible to the public.
About:
This Kernel is based on @Tommy-Geenexus Zombie Kernel. He was ok with us continuing/porting his projects, so myself5 and I started to create the "oshmoun Myself5 Zombie Kernel" aka OM5Z Kernel.
Features and Commit History:
Check 2nd Post!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
You can either flash the provided boot.img via fastboot, or flash the zip in recovery.
Additional Information:
The Kernel is underclocked by default. Both Cluster are underclocked to 1,344/1,536 GHz respectively, resulting into HUGE Temperature improvements. However, due to public demand, V2 features the ability to disable the underclock (in case you need to make some baked Eggs real quick, whatever). All you need to do is run this code after boot (Kernel Adiutor has the abilty to execute scripts at startup, just a reminder).
Code:
echo "0:4294967295 1:4294967295 2:4294967295 3:4294967295 4:4294967295 5:4294967295 6:4294967295 7:4294967295" > /sys/module/msm_performance/parameters/max_cpu_freq
What it effectively does, is resetting the max clock limit for each core to the default (unset) values, allowing you to set whatever frequency (from the ones available ofc) you want.
Download:
OM5Z Kernel (Release Versions)
dl.myself5.de
OM5Z Kernel (Testing Versions)
testing.myself5.de
Thanks/Credits:
Tommy-Geenexus - You can guess why
myself5 - for obvious reasons
FreeXperia Team (especially Jerpelea) - for too many things!
CarbonRom Team - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
infected_ - for help with SM!
If I forgot you, please tell me.
If you think we deserve a donation, I won't stop you
To Donate to Tommy-Geenexus:
To Donate to Myself5:
Thanks a lot to those who have donated!​
Additional Information:
Some stock kernels require different Recovery Images than AOSP Kernels. We set an end too this, and fixed init_sony, rather than using some very outdated software which somehow works. This means, you might need to use a different recovery with this kernel if you're currently on a "stock" recovery. We're hoping that other stock kernel devs adapt our solution, so we can set an end to the old scripts.
XDA:DevDB Information
OM5Z Kernel, Kernel for the Sony Xperia Z5 Compact
Contributors
oshmoun, Myself5, Tommy-Geenexus
Kernel Special Features:
Version Information
Status: Stable
Created 2016-06-25
Last Updated 2016-07-16

Latest Version: V2.0
Changelog:
Version 1:
Add kexec-hardboot
ramdisk: use init_sony, no outdated bootrec scripts
ramdisk: fix USB on Stock when using MultiROM
Remove broken Sony MHL driver
Update to 32.2.A.0.224
Merge caf/LA.BF64.1.2.2_rb4.40
Various CVE Fixes
Initial Z5 and Z5C bringup, based on Zombie Kernel with these features
Bug fixes for touchscreen / fingerprint / scheduler drivers
Stripped unnecessary debug nodes, legacy code and disabled KSM
Turquoise LED when EOC is reached (when battery is fully charged)
CPU-Speedbin visible in debugfs node (sys/kernel/debug/msm8994_cpuinfo/*Speedbin)
Calibrated JDI Novatek Panel to 6500K Color Temperature and 2.2 Gamma
Tomtom-Codec Digital Speaker-, Mic- and Cam-mic-Control
Underclocked both Cluster to 1,344/1,536 GHz respectively, resulting into HUGE Temperature improvements
Version 2:
Ability to disable the underclock (added on public demand) See OP for instructions
Removed TomTom Audio
Update to 32.2.A.0.253
Update init_sony
include DRM Fix by @tobias.waldvogel
Add support for sumire_dsds (E6633 and E6683). Thanks to @tOrNadO™ for testing
For a detailed Changelog, check the Github Commit history:
https://github.com/Myself5/android_kernel_sony_msm8994_OM5Z/commits/

[KERNEL][Stock 224][Z5C][6.0.x]OM5Z Kernel
Tried to flash this in twrp, but it fails. Downloaded again and tried to flash but still fails
I have stock rom with androplus kernel

I think that should be done a tutorial for the stock users...
Enviado do meu E5823 através de Tapatalk

mele80 said:
Tried to flash this in twrp, but it fails. Downloaded again and tried to flash but still fails
I have stock rom with androplus kernel
Click to expand...
Click to collapse
Can you please say what the error message was? also, maybe your download was corrupt. You can redownload and see if that helps.
I just tried flashing the zip in twrp and it works.

[KERNEL][Stock 224][Z5C][6.0.x]OM5Z Kernel
Zip signature verification failed
Error installing zip file
Flashing from adb worked

This kernel include pacthes from here http://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605 ?

There is any tutorial to flash this kernel?
Can i flash it up on the stock rom and stock recovery?
Enviado do meu E5823 através de Tapatalk

arhangel78ru said:
This kernel include pacthes from here http://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605 ?
Click to expand...
Click to collapse
yes "RIC off" and "DRM patch" are included.
jdcchora1533 said:
There is any tutorial to flash this kernel?
Can i flash it up on the stock rom and stock recovery?
Click to expand...
Click to collapse
As mentioned in the thread title, this is for .224, so obviously you can flash it on stock rom.
Not sure what you mean with stock recovery though.

Trying to install the zip file with TWRP 3.0.2 and got this error
Updater process ended with ERROR: 7
Error installing zip file '/external_sd/(folder where i have the zip)
What i am doing wrong?
regards

fridlack said:
Trying to install the zip file with TWRP 3.0.2 and got this error
Updater process ended with ERROR: 7
Error installing zip file '/external_sd/(folder where i have the zip)
What i am doing wrong?
regards
Click to expand...
Click to collapse
Does your folder have weird characters or spaces in the name? Please try moving the zip to another directory.

oshmoun said:
Does your folder have weird characters or spaces in the name? Please try moving the zip to another directory.
Click to expand...
Click to collapse
I try to move to internal storage root folder and same result [emoji21]

fridlack said:
I try to move to internal storage root folder and same result [emoji21]
Click to expand...
Click to collapse
Which TWRP 3.0.2 recovery are you using? I use oshmoun's MultiROM TWRP, and it works very well! (You don't need to install or use the MultiROM part of it.)

Thanks for your great work. I ran into an issue with root acting weird after kernel install. It actually messed up binary folders. I have no idea how but apps were getting root denial with this awesome kernel.
Intsallation went ok with twrp 3.0.2.0. So no issues there.
Have you guys noticed this kind of behaviuor with the kernel?
Sent from my E5823 using XDA-Developers mobile app

I see the underclocked cores and I'm curious about battery life improvement... someone?

Triflot said:
Which TWRP 3.0.2 recovery are you using? I use oshmoun's MultiROM TWRP, and it works very well! (You don't need to install or use the MultiROM part of it.)
Click to expand...
Click to collapse
I am using this revovery http://forum.xda-developers.com/showthread.php?t=3334568 and xpower 3.0 rom with stock kernel
Is the update script checking if the device is correct? Maybe xpower rom have something changed?
Enviado desde mi E5823 mediante Tapatalk

fridlack said:
I am using this revovery http://forum.xda-developers.com/showthread.php?t=3334568 and xpower 3.0 rom with stock kernel
Is the update script checking if the device is correct? Maybe xpower rom have something changed?
Enviado desde mi E5823 mediante Tapatalk
Click to expand...
Click to collapse
ok sorry about that. I think I should update the recovery thread to mention that it's not maintained anymore.
Yes there is a device check, but usually if that fails then it would tell you what it was expecting (in this case that'd be suzuran, E5823, E5803).
Could you please try the multirom recovery. It's basically TWRP only with multirom additions. The multirom recovery works pretty well regardless if you have multirom installed or not.

Good to see another kernel in the panorama! As soon as i get the latest MM update, i'll surely test it.
However i'm interested in the standby consumption during night, did you test it? every stock based kernel-rom combination seems to be plagued by high drainage even in offline mode without particular wakelocks

oshmoun said:
ok sorry about that. I think I should update the recovery thread to mention that it's not maintained anymore.
Yes there is a device check, but usually if that fails then it would tell you what it was expecting (in this case that'd be suzuran, E5823, E5803).
Could you please try the multirom recovery. It's basically TWRP only with multirom additions. The multirom recovery works pretty well regardless if you have multirom installed or not.
Click to expand...
Click to collapse
After installing the multi recovery ( via fastboot, zip file had the same problem) I install zip kernel without problems, thanks so much!
But now I have a new problem, can not update supersu binaries, got an error, I tried to install stable and beta supersu and same result with both, anyone with the same problem?

fridlack said:
After installing the multi recovery ( via fastboot, zip file had the same problem) I install zip kernel without problems, thanks so much!
But now I have a new problem, can not update supersu binaries, got an error, I tried to install stable and beta supersu and same result with both, anyone with the same problem?
Click to expand...
Click to collapse
Yep. I have exact the same issue. Su wants to update binary without success. It doesn't matter which su I use.
Sent from my E5823 using XDA-Developers mobile app

[Kernel][M205x] Gear Kernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--DISCLAIMER--
- This kernel works only on SM-M205x aka Galaxy M20. I'm not responsible for any damage if you flash on other devices.
- I am not responsible for any damage of any kind that this kernel may cause.
- You are allowed to use this kernel in your project with proper credits and links to the thread or source code.
- Bugs can be reported in XDA or via my Telegram Group. Make sure you provide detailed info when reporting bugs (device variant and logcat).
- If you like my work please hit the "Thanks" button and feel free to donate to me via my paypal.
--FEATURES--
- Built from universal7904 OSS Kernel Source
- Supports Android S and S
- Build with Proton Clang 13
- WireGuard Support
And many more....
--SUPPORTED DEVICE--
- SM-M205F (Tested)
- SM-M205FN
- SM-M205G (Tested)
- SM-M205GN
- SM-M205M
--HOW TO INSTALL--
1. - Install a Custom Recovery with Odin3
2. - Download the kernel zip
3. - Copy the kernel zip into your phone or sd card
4.- Reboot in Recovery Mode
5. - Wipe Cache/Dalvik Cache
6. - Flash the Kernel Zip
7. - Enjoy!
DOWNLOAD HERE!
--CREDITS--
- Samsung for kernel sources
- @SamarV121 for the kernel source​
Contributors
Gian Paolo Estacio
Source Code: github.com/eun0115/android_kernel_samsing_m20lte
Version Information
Status: Stable
Last Updated 2022-02-26

I am STUCK with SeLinux FORCED to enforcing after upgrade to M205FDDU8CUI1 ( my phone is SM-M205FZBDINS) . I want to make it
temp permissive || change seLinux pOlicy to permit a mounting operation to happen || if possible correct my mounting approach.
On the 3rd op - I tried everything but NOTHING works. FYI - I want to bind mount WhatsApp folder to its own ext4 partition . Wtth permissive it was poss. NOT so with enforcing. Tried bindfs all options NOT working. since u see t o no el more kernel selinux I asked u & XDA here . Do you know how to get this done ?

will it work after upgrade to latest ROM M205FDDU8CUI1. Previous kernel caused boot loop. SeLinux ? 0 or 1 Magisk rooted Y / N ? Samnsung Crapware Detox ? Y / N ? Volte Y / N THANKS buddy for your effort

sieger007 said:
I am STUCK with SeLinux FORCED to enforcing after upgrade to M205FDDU8CUI1 ( my phone is SM-M205FZBDINS) . I want to make it
temp permissive || change seLinux pOlicy to permit a mounting operation to happen || if possible correct my mounting approach.
On the 3rd op - I tried everything but NOTHING works. FYI - I want to bind mount WhatsApp folder to its own ext4 partition . Wtth permissive it was poss. NOT so with enforcing. Tried bindfs all options NOT working. since u see t o no el more kernel selinux I asked u & XDA here . Do you know how to get this done ?
Click to expand...
Click to collapse
hey there! im using the latest M205GDXU7CUI1, i think permissive isnt booting for OneUI and it requires to compile from source to make it boot

sieger007 said:
will it work after upgrade to latest ROM M205FDDU8CUI1. Previous kernel caused boot loop. SeLinux ? 0 or 1 Magisk rooted Y / N ? Samnsung Crapware Detox ? Y / N ? Volte Y / N THANKS buddy for your effort
Click to expand...
Click to collapse
Hi, this kernel is for AOSP Custom Roms only that you can found on official lineage os download site. i will release for OneUI version soon!

stuck @ androidlogo x 10 times...once started --> internal error --> immediately reboo & then stuck again t. @gianonceu How do I compile from source. For this stock ROM if I have source should I just compile just boot ( after modifying ) or entire ROM ?

sieger007 said:
stuck @ androidlogo x 10 times...once started --> internal error --> immediately reboo & then stuck again t. @gianonceu How do I compile from source. For this stock ROM if I have source should I just compile just boot ( after modifying ) or entire ROM ?
Click to expand...
Click to collapse
better yet, use this custom rom (https://download.lineageos.org/m20lte) because that kernel is meant for custom rom like LineageOS that i include.

Gear Kernel for OneUI Core 2.0 is UP! use this link below
Kernel for Samsung Galaxy M20/M30
Custom Kernel for Samsung Galaxy M20/30 codename m20lte/m30lteThis kernel aimed to be balanced, daily driver kerneland give you the best battery backup possible.
www.pling.com

Sir gaming performance sooo lagging compar to my stock kernel for (lineage OS Custom ROM)
Sir please build gaming kernel with Over Clock addition
FOR GALAXY M20

Sabnir said:
Sir gaming performance sooo lagging compar to my stock kernel for (lineage OS Custom ROM)
Sir please build gaming kernel with Over Clock addition
FOR GALAXY M20
Click to expand...
Click to collapse
hi, i already did overclocking the kernel and did a gaming test with oc kernel. i wont do it again because of how hot and unstable the phone is when it throttles. because i will be the one who will blame if the phone is broken because of overclocking, i hope you understand.

It works thanks!.

sieger007 said:
It works thanks!.
Click to expand...
Click to collapse
good to know!

gianonceu said:
hi, i already did overclocking the kernel and did a gaming test with oc kernel. i wont do it again because of how hot and unstable the phone is when it throttles. because i will be the one who will blame if the phone is broken because of overclocking, i hope you understa
Click to expand...
Click to collapse
gianonceu said:
hi, i already did overclocking the kernel and did a gaming test with oc kernel. i wont do it again because of how hot and unstable the phone is when it throttles. because i will be the one who will blame if the phone is broken because of overclocking, i hope you understand.
Click to expand...
Click to collapse
Hi thanks for your reply Sir Sir, I have a wish
Sir please build Kali nethunter kernel for monitor mode
Supported for Galaxy M20
Sir please build
I hope you seen my comment & reply...

Hi thanks for your reply Sir Sir, I have a wish
Sir please build Kali nethunter kernel for monitor mode
Supported for Galaxy M20
Sir please build
I hope you seen my comment & reply...

Sabnir said:
Hi thanks for your reply Sir Sir, I have a wish
Sir please build Kali nethunter kernel for monitor mode
Supported for Galaxy M20
Sir please build
I hope you seen my comment & reply...View attachment 5552813
Click to expand...
Click to collapse
ill try my best to make kali nethunter works for our device

Howdy PL also add ext4 on micro-sd card mounting via vold . ALL custom ROM - GSI Lineage etc support it. i.e. support ext4 FS for mounting . Then I can flip SeLinux 1 . I have to run it 0 cos of SeLinux Policy issues. Can you PL point me to some online guide of how to compile new SeLinux Policy rules ?

Gear Kernel v3 for AOSP is UP!
Download Link? (use the link in the post above)
Changelogs:
Upstream to v4.4.207
Implemented Kprofiles in 4.4 (originally came from 4.14 and 4.9 kernels)
reduced ntp wakeups
mm: swap: swap pages one at a time
Compiled using -O3 optimizations
workqueue: change permissions to allow root control of wq_power_efficiency
kernel: power: process: decrease task freezing timeout
tcp_output: set initial TCP window size to 64K (speed improvement)
tcp: introduce tcp_jiffies32
tcp_westwood: Make the RTT values static and not tunable
tcp_westwood: use tcp_jiffies32 instead of tcp_time_stamp
tcp_westwood: make 'rtt_min' and 'init_rtt' tunables
tcp_westwood : Bump minimum RTT and lower initial RTT duration

Gear Kernel v4 for AOSP is UP!
Download Link? (use the link in the post above)
Changelogs:
Upstream to v4.4.222