dear
The lastest "MaxFu_HydraCoreNirvana_n5.JBT.STD" kernel is it compatible with galaxy note on ICS Sotck ROM 4.0.4 ?
Or is only the older version "hydracore v7.6.2" ?
Thancks
(Sorry for my bad english).
tonio83 said:
dear
The lastest "MaxFu_HydraCoreNirvana_n5.JBT.STD" kernel is it compatible with galaxy note on ICS Sotck ROM 4.0.4 ?
Or is only the older version "hydracore v7.6.2" ?
Thancks
(Sorry for my bad english).
Click to expand...
Click to collapse
Please read the first post in MaxFu's thread. Especially chapter 4. Technical Description.
But you are really sure what you want to do? New member, first post - so I guess not very experienced.
You should know and read about the possibility to brick your device with ICS 4.0.4 stock. Please be careful.
Or better: switch to one of the Custom Roms (GB, ICS or JB, or CM or...). These are safe, you'll get good instructions how to install and excellent Roms to play with.
Hello everyone After selling my xperia u I got this cellphone which is At&T branded .... I was running gingerDX on my xperia x8 a long time ago then I installed some custom roms on xperia U as well after unlocking it's bootloader and installing custom kernels etc. I sold xperia U as it was a bit slow for me....
Now the question I want to ask is : what are some good roms (without any bugs) fast and stable for this cellphone ? right now I'm on Android 4.1.1 official ... is it good enough if I only root it or should I go for a custom kernel / Rom and what is the easiest method to root it ?
Reagrds...
orangzeb said:
Hello everyone After selling my xperia u I got this cellphone which is At&T branded .... I was running gingerDX on my xperia x8 a long time ago then I installed some custom roms on xperia U as well after unlocking it's bootloader and installing custom kernels etc. I sold xperia U as it was a bit slow for me....
Now the question I want to ask is : what are some good roms (without any bugs) fast and stable for this cellphone ? right now I'm on Android 4.1.1 official ... is it good enough if I only root it or should I go for a custom kernel / Rom and what is the easiest method to root it ?
Reagrds...
Click to expand...
Click to collapse
Arrgh kernel for photon Q LTE works for our phone too, best and only(?) custom kernel we have besides N8 (only for 4.2.2 ROMs). Carbon, CM 10.2, PACman, and HoloBlur are my personal best experiences with this phone.
Sent from my MB886 using xda app-developers app
Carbon 4.3 nighlies by far the best and most stable
Sent from my MB886 using Tapatalk now Free
As for rooting and unlocking bootloader plus flashing a custom recovery, the Myth Tools program for Atrix HD has all those 3 things wrapped into one easy executable.
Here: http://forum.xda-developers.com/showthread.php?t=2262726
Sent from my MB886 using xda app-developers app
ignore this.
Thank Neighbor808 if you provide 2, 3 links for roms and the link to kernel I'll be thankful to you.. as I don't want to risk anything here as I'm new to Motorola world
Generally, look for files under mb886. Anyways, here ya go.
CM: http://get.cm/?device=mb886
Carbon: http://goo.im/devs/carbon/mb886/nightly
PACman: http://forum.xda-developers.com/showthread.php?t=2398627
HoloBlur (Stock based): http://forum.xda-developers.com/showthread.php?t=2356624
Argh Kernel: http://forum.xda-developers.com/showthread.php?p=31708952
Make sure you get CM 10.2 kernel for non stock based. Don't flash the kernel of the date of your nighty is later than the kernel (Oct 2 so far). It gets updated regularly.
Sent from my MB886 using xda app-developers app
I can't figure out which kernel to download ASA / FFW ? I've downloaded Oct 2 version of carbon ROM, any thread with it's screenshots and features etc ?
Please also tell in which sequence I should do the procedure ? like : root > recovery > Unlock Bootloader > kernel and then rom ?
Root, unlock bootloader, recovery, backup current rom, wipe data and system, flash rom then kernel.
Sent from my PACMAN MATRIX HD MAXX
Deeje is spot on. As for which kernel to download, Post #2 contains the kernels for STOCK or Stock-based ROMs. All of the ROMs I linked to you are CM-Based except for HoloBlur, which is stock based (but it already comes with Arrgggh kernel so don't worry about that). The thread clearly states:
ASA-36 (Original 4.0.4 ICS firmware)
ASA-14 (Final 4.0.4 ICS firmware)
FFW-5 (Latest 4.1.2 JB firmware)
Pretty much the only stock kernel you're ever going to need unless you fastboot flash back to ICS is FFW-5.
Post #5 contains the kernels for CM-Based ROMs (Pretty much all the ROMs out there that aren't stock based). The CM 10.1 Kernel is for Android Version 4.2.2 ROMs, while the CM 10.2 kernel is for Android Version 4.3 ROMs. If you are flashing Carbon October 2 nightly, that is Android 4.3, so you will flash the CM 10.2 edition.
Here's links for the standalone posts to make sure you know where you're going...
-------------------------------------------------------------------------------------------------------------------------
Stock Kernel: http://forum.xda-developers.com/showpost.php?p=31708970&postcount=2
CM Kernel: http://forum.xda-developers.com/showpost.php?p=31717152&postcount=5
By the way, check Atrix HD Development section, has all of our ROMs + screenshots and explains features.
Thanks alot homie this explains everything now tell me some good features of Carbon / Pacman Roms so I consider flashing ?
Carbon is basically CyanogenMod with some great Paranoid Android features added in (like Halo, PIE, navbar customization, etc.) . Smooth, reliable, great battery. PACman is a combination of 3 popular ROMs (Paranoid Android, AOKP, CyanogenMod) and has pretty much every feature you can think of. Highly customizable, but has a few minor bugs and slightly worse battery. Carbon is more stable but not by a whole lot.
Official Carbon thread: http://forum.xda-developers.com/showthread.php?p=42183613
[ROM][AOSP] [Nightly/Release] CarbonRom JB [MB886]
Sent from my MB886 using xda app-developers app
Make sure you get CM 10.2 kernel for non stock based. Don't flash the kernel of the date of your nighty is later than the kernel (Oct 2 so far). It gets updated regularly.
Click to expand...
Click to collapse
didn't understand this line...
Can I flash latest carbon nightly builds if my kernel date is earlier?
orangzeb said:
didn't understand this line...
Can I flash latest carbon nightly builds if my kernel date is earlier?
Click to expand...
Click to collapse
Yes, you can. Just take latest kernel currently - Oct 23 2013 CM10.2 and latest Carbon rom from here (*Currently there are some problems on goo.im*) or here.
Kernel and rom date should be close as possible to avoid problems.
If there will be newer kernel then it might not work if rom is older than kernel but even then if there are any problem you can just re-flash earlier kernel. Although you don't really have to mess with kernel at first. Carbon actually come with a working kernel (latest build have mattmanwrx kernel) but it doesn't support overclocking/undervolting.
Ohh, and don't forget to flash gapps if you need them..
Thanks mate... for me most stable versions of kernel and roms are : 7 oct 2013..... I don't want to change them untill something really big comes out....I don't like overclocking as ATRIX HD is fast enough already with or even without pureperformance mod but I see battery improvements via that mod or maybe that's "Greenify" app that I'm using...
Hi all, i'm searching for a stable ROM for my new GT-8910N, possibly with NFC support.
I've read about Maclaw's ROM, but i don't know what to choose, i need your help.
I'm coming from Nexus HD2 by tytung CM 10.2, and now the stock ROM 4.1.2 is a back step.
I want to upgrade to a stable ROM for a daily use, also for my wife's phone.
My phone details:
GT-8910N
ANDROID 4.1.2
BASE BAND I8910NXXALL6
KERNEL 3.0.31-742346
BUILD JZO54K.I8910NXXALL6
Thanks in advance from Italy.
Hi bud, look if you want a ROM receiving the NFC support you better stick to stock rom or a custom one based in stock 'cause Maclaw's roms don't support NFC feature yet, well, that being said I've been since the beginning only with AOSP based roms so I don't really know which customs roms are out there that support the NFC feature but I think Dmod, Benz and Virginity roms support it you can check them out in the Android Development section, greetings man.
Sent from my GT-I8190 using xda app-developers app
Thread closed as its a Best ROM thread.
Hi,
I've used my Note 1 for quite a while now and have tested various custom ROMS on it. I now want to take it back to stock ROM and from what I can gather it should be pretty simple to accomplish. However I have a couple of concerns:
There are so many stock ROMS out there... How do I determine which one I should use? Does it matter or will all work?
I read in a comment somewhere that I should not "downgrade" to a ROMS with an earlier Android version. Is this true?
I am currently running Mokee version MK44.4-n7000-141219-RELEASE with Android version 4.4.4
Baseband version N7000XXLT3
Hope you can help!
Thanks!
Jobajean said:
Hi,
I've used my Note 1 for quite a while now and have tested various custom ROMS on it. I now want to take it back to stock ROM and from what I can gather it should be pretty simple to accomplish. However I have a couple of concerns:
There are so many stock ROMS out there... How do I determine which one I should use? Does it matter or will all work?
I read in a comment somewhere that I should not "downgrade" to a ROMS with an earlier Android version. Is this true?
I am currently running Mokee version MK44.4-n7000-141219-RELEASE with Android version 4.4.4
Baseband version N7000XXLT3
Hope you can help!
Thanks!
Click to expand...
Click to collapse
You can flash whichever 4.1.2 ROM you prefer. Go to samsungupdates.com and flash via PC of mobile Odin. Read up on how to do it properly. Guides already exist.
Sent from my GT-I9205 using Tapatalk
I am finding a rom for my s5830.
I find the newest android version ( for example "kitkat")...but i need the relatively stable rom.
Can you help me?
Thx
Sent from my Nexus 5 using XDA Free mobile app
giobbe314 said:
I am finding a rom for my s5830.
I find the newest android version ( for example "kitkat")...but i need the relatively stable rom.
Can you help me?
Click to expand...
Click to collapse
Hi,
KitKat it is not for S5830.
Each custom ROM, improvising some of the new versions of Android, but actually improved Gingerbread remains the same.
A custom ROM stable it's RAINBOW SGA v3.2.
You can find it at this address: http://forum.xda-developers.com/galaxy-ace/s5830-develop/rom-sga-rainbow-rom-t3086842
I hope this help you.
Good luck.
You can try my rom (based on kitkat 4.4.4)
Forum link http://forum.xda-developers.com/galaxy-ace/s5830-develop/rom-cyanogenmod-11-t3194339