Database Develop

[Recovery]Twrp v3 for Galaxy J700T/T1

Twrp Recovery v3 For Samsung Galaxy J7 (SM-J700T/T1) Variants​This recovery is ported from j700f/h twrp recovery , my kernel and stock dt images were included to get it to work
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Warning : if it didn't work for you , you should use my kernel to get it to work
HTML:
http://forum.xda-developers.com/galaxy-j7/j700t-development/kernel-mina-kernel-v1-j700t-t3427446
How to flash [no need to have root] :
Code:
* Download the odin format recovery zip *
* Extract it *
* Enable oem unlock in the developer options *
* Enter download mode *
* Flash the extracted [recovery.tar.md5] file using odin *
* Enjoy *
-if you want internal storage or data to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
-If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
HTML:
https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
-If you only want a bootable system partition or writable data in TWRP:
Download dm-verity and force encryption disabler.
HTML:
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
Without exiting TWRP, transfer no-verity-opt-encrypt.zip to your device over MTP* and flash it using [Install] in TWRP
-Source
HTML:
http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Click to expand...
Click to collapse
Downloads :
twrp v3 image format
https://www.mediafire.com/download/ehygrybdq7a2j8e
twrp v3 odin format [extract zip then flash (recovery.tar.md5) using odin]
https://www.mediafire.com/download/4f5sz13cz5gy466
Thanks to my testers:
@OriginalShinken1 @!Led*Eyes!
Please Conider donating if you appreciate my work, Ty :highfive:
Paypal donation link: https://paypal.me/messi2050

Thanks again for your work here.
Bring on the ROMS!!!!!!
That was just out loud in general.....not aimed anywhere in particular.
---------- Post added at 09:43 PM ---------- Previous post was at 09:32 PM ----------
@messi2050
This also works for J700T (T-Mobile). May need to add to op.
-sent from this device using this app.

OriginalShinken1 said:
Thanks again for your work here.
Bring on the ROMS!!!!!!
That was just out loud in general.....not aimed anywhere in particular.
---------- Post added at 09:43 PM ---------- Previous post was at 09:32 PM ----------
@messi2050
This also works for J700T (T-Mobile). May need to add to op.
-sent from this device using this app.
Click to expand...
Click to collapse
You are welcome , ok ty i will add it

Only because this isn't obviously stated:
TWRP does see your external sd card. That being said, those of you who are already rooted can download these files (su and twrp fix zip) to your external sd card. Also use titanium backup for your apps and save to that same sd card. When you format storage, you can install fix and su from the untouched sd card. Once you're booted and set up, use titanium backup to restore your apps.
-sent from this device using this app.

After using flashify to install your kernal, flashify says that i do not have root and cant flash twrp. What do i do from here?

SallySalad said:
After using flashify to install your kernal, flashify says that i do not have root and cant flash twrp. What do i do from here?
Click to expand...
Click to collapse
I'm gonna make an odin flashable twrp so you can flash it directly with odin

SallySalad said:
After using flashify to install your kernal, flashify says that i do not have root and cant flash twrp. What do i do from here?
Click to expand...
Click to collapse
odin flashable file added but it's not tested yet please test and report here

messi2050 said:
odin flashable file added but it's not tested yet please test and report here
Click to expand...
Click to collapse
thank you so much it works in odin

brandonlee96 said:
thank you so much it works in odin
Click to expand...
Click to collapse
I'm Happy to know that it worked for you , thank u for reporting

I put it under AP on Odin, yeah? Sorry about all of this still trying to learn.

messi2050 said:
I'm Happy to know that it worked for you , thank u for reporting
Click to expand...
Click to collapse
is there any way to get rid of the red text about the kernal and the recovery on boot up?
just wondering

brandonlee96 said:
is there any way to get rid of the red text about the kernal and the recovery on boot up?
just wondering
Click to expand...
Click to collapse
No it also appear on j700h/f/m ,it reports the selinux status

messi2050 said:
No it also appear on j700h/f/m ,it reports the selinux status
Click to expand...
Click to collapse
im sorry to bother you. but how exactly can i access the internal storage in TWRP recovery. i did what you said above but it seems like it doesn't work on the next restart to recovery?

TWRP_Internal_Access
brandonlee96 said:
im sorry to bother you. but how exactly can i access the internal storage in TWRP recovery. i did what you said above but it seems like it doesn't work on the next restart to recovery?
Click to expand...
Click to collapse
--So you flashed the Mina kernel image
--booted into Download mode
--Flashed the TWRP.tar via ODIN
--Booted into TWRP
-- Choose WIPE --> Format DATA --> type YES
-- Go back to HOME screen in TWRP and select REBOOT -----> RECOVERY
I was able to access the internal storage in TWRP at this point. You can check it by going to Install ---> Select Storage ---> Internal Storage.
EDIT: Do you mean how can you copy the zip files to the Internal Storage while still inside of TWRP?

brandonlee96 said:
im sorry to bother you. but how exactly can i access the internal storage in TWRP recovery. i did what you said above but it seems like it doesn't work on the next restart to recovery?
Click to expand...
Click to collapse
check this thread
http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770

Working great for me, on the J700T just a few questions what are the new icons in the bar one looks like the Carolina Hurricanes logo and the other says Vo))LTE?
---------- Post added at 10:46 AM ---------- Previous post was at 10:05 AM ----------
Im sorry but one last stupid question is the J700T ARM or ARM64?

Why is it that i still can't make a nandroid backup with this twrp i flashed everything and i am still rooted.

Krumplife4400 said:
Why is it that i still can't make a nandroid backup with this twrp i flashed everything and i am still rooted.
Click to expand...
Click to collapse
those are new samsung restrictions and security , i can't do anything towards it , this restriction is found on s7 too , check this thread and u will understand
http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770

O ok i see now... Is there anyway to get xposed framework to work on this phone?

messi2050 said:
I'm Happy to know that it worked for you , thank u for reporting
Click to expand...
Click to collapse
Testing now. Thank u. I love u for this mate

Help a Noob: Rooting and installing ROMs

I recently started playing pokemon go and I am getting really frustrated while playing because it lags soo much and my phone is generally quite slow now. I have been told rooting and installing a good ROM can help with this and I have never attempted this, could someone please explain what rooting and ROMs are and their benefits and a how to guide for this phone and also the best ROM?
I know there are loads of threads on this but if someone could link me best threads I would be eternally gratefull!!

First of all, which variant of LG L90 is your phone (D4xx)? And could you go to Menu > General > About Phone > Software Information and tell me your "version" (v10x or v20x)?
Root is the ability for the user to take total control of his phone, from doing as little as automate 3G activation when an app is open to instaling custom ROMs, which are custom firmwares that you can install in your device, just like the stock one you're currently in, but with some modifications made by its creators. As for advantages, with root you have more freedom over your device, and with Custom ROMs you have some tweaks, which change depending on the ROM you choose to install, going from just porting newer firmwares to older devices to being an entire new OS (Operational System, in case you don't know).

Hyoretsu said:
First of all, which variant of LG L90 is your phone (D4xx)? And could you go to Menu > General > About Phone > Software Information and tell me your "version" (v10x or v20x)?
Root is the ability for the user to take total control of his phone, from doing as little as automate 3G activation when an app is open to instaling custom ROMs, which are custom firmwares that you can install in your device, just like the stock one you're currently in, but with some modifications made by its creators. As for advantages, with root you have more freedom over your device, and with Custom ROMs you have some tweaks, which change depending on the ROM you choose to install, going from just porting newer firmwares to older devices to being an entire new OS (Operational System, in case you don't know).
Click to expand...
Click to collapse
Thank you soo much for your reply and sorry about my late reply. My variant is LG-D405n and software version is V20c-234-30. I think I understand what Root and ROM is thx.
So could you link me to the best method to root and install ROM on my phone?
And what is the best ROM for my device to free up the RAM and CPU used on my device to increase my phone speed?

First of all, install these required apps:
http://king.myapp.com/myapp/kdown/img/NewKingrootV4.9.6_C151_B309_en_release_2016_08_18_105203.apk (For rooting)
https://play.google.com/store/apps/details?id=com.cgollner.flashify (For flashing the Custom Recovery)
https://play.google.com/store/apps/details?id=jackpal.androidterm (For terminal emulation)
Custom Recovery:
TWRP: http://forum.xda-developers.com/devdb/project/dl/?id=18679&task=get
Personally recommended Custom ROM, CyanogenMod (Ports Android updates to older phones plus some tweaks) and Gapps (Google Apps, it's needed to have things like calculator, play store, etc):
CM13: https://download.cyanogenmod.org/get/jenkins/175208/cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J8-w7.zip
Gapps: http://opengapps.org/ (Go to this link, select ARM in platform, 6.0 in android and Nano in variant, then just click the download image button)
Put the TWRP img, the CM13 rom img and gapps on microSD or internal storage. Open Kingroot and click on the green button after the 3 introduction images. After a few minutes, your device will be rooted. Grab this file: http://forum.xda-developers.com/lg-...0w7xxshoxx-t2826150/post54358527#post54358527 (D405n_v20a_patched_aboot, don't worry, it's okay if you flash a different software version aboot as long as it's the same device as yours. The only "problem" you can have is to have your software version changed to v20c, which if I remember correctly, can be fixed using Bootstacks), transfer it to your phone and open Terminal Emulator. Then input the following commands:
su
dd if=(aboot.bin storage directory) of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Then, go to flashify and flash your custom recovery image (TWRP or CWM) in the flash recovery img option. After this, reboot into recovery by pressing Volume Down + Power and when you see the LG Logo, let go of the Power button and press it again. Then select yes two times with the volume keys for selection and power button to actually select the options (Don't worry, your device won't be factory resetted if you successfully installed custom recovery). Then, if you want, make a backup of your entire phone (recommended, just in case something goes wrong or if you just want your apps back when the process is done) in the Backup section and then do a factory reset through the Wipe option (Don't select anything, just swipe the bar). Select the Install option and select your ROM zip. After this, do the same process as the ROM installation but this time with Gapps zip. There you go, now you have CM13 installed. If you want root again, you don't have to install Kingroot again this time, as CM13 has built-in root, just enable Developer options and activate root and you're ready to go. Also, if you want the apps you had before the installation, just restore your backup (ONLY THE DATA PARTITION, otherwise CM13 will be uninstalled and replaced with stock ROM). If something goes wrong and you accidentally brick your device, just reply and I'll help you fix it. (If helped, click the Thanks! button)

Hyoretsu said:
Grab this file: http://forum.xda-developers.com/lg-...0w7xxshoxx-t2826150/post54358527#post54358527 (D405n_v20a_patched_aboot, don't worry, it's okay if you flash a different software version aboot as long as it's the same device as yours. The only "problem" you can have is to have your software version changed to v20c, which if I remember correctly, can be fixed using Bootstacks), transfer it to your phone and open Terminal Emulator. Then input the following commands:
su
dd if=(aboot.bin storage directory) of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Click to expand...
Click to collapse
Hi, thank you so much, I finally rooted my device but I am having problems with the script part of the terminal emulator.
I wrote upto msm_sd and then this happen automatically:
View attachment 3865360
View attachment 3865361
View attachment 3865362
View attachment 3865363
I don't know what to do here..
EDIT: Also am I meant to have the SuperSU/SuperUser app installed once rooted? Then get a popup in the terminal emulator for permission for its root access?

Firebird3334 said:
Hi, thank you so much, I finally rooted my device but I am having problems with the script part of the terminal emulator.
I wrote upto msm_sd and then this happen automatically:
View attachment 3865360
View attachment 3865361
View attachment 3865362
View attachment 3865363
I don't know what to do here..
EDIT: Also am I meant to have the SuperSU/SuperUser app installed once rooted? Then get a popup in the terminal emulator for permission for its root access?
Click to expand...
Click to collapse
You have to change "(aboot.bin storage directory) with the directory in which aboot.bin is stored. And no, you don't need SuperSU, when you use the su command, a KingRoot window will open, just say yes.

EDIT: Wahay! It works! Thank you soo much for your help!
EDIT 2: I can't seem to find the option to edit my recent button in settings. What can I do?

Firebird3334 said:
EDIT: Wahay! It works! Thank you soo much for your help!
EDIT 2: I can't seem to find the option to edit my recent button in settings. What can I do?
Click to expand...
Click to collapse
If it's the menu button, I don't know of any way to change them, as Android updates change them. For example, my phone in KitKat used the home button for recent apps, in Lollipop it used the menu button for recent apps, and when I installed CM13, it used the home button again.
EDIT: Browsing LG L90 xda, I found this: http://forum.xda-developers.com/lg-l90/themes-apps/mod-button-remaps-l90-t3145146

Hyoretsu said:
If it's the menu button, I don't know of any way to change them, as Android updates change them. For example, my phone in KitKat used the home button for recent apps, in Lollipop it used the menu button for recent apps, and when I installed CM13, it used the home button again.
EDIT: Browsing LG L90 xda, I found this: http://forum.xda-developers.com/lg-l90/themes-apps/mod-button-remaps-l90-t3145146
Click to expand...
Click to collapse
You have helped me out so much already! Thank you so much!
But just one more thing though, could you explain how to install magisk and xposed in layman's term so I can use Android Pay?

I don't know what magisk is nor layman's term, but to install Xposed just go to this thread: http://forum.xda-developers.com/showthread.php?t=3034811, download both Xposed installer apk and xposed zip. Install xposed apk and flash xposed zip

Hello,
Help me please I'm getting Error 7 and after twrp reflash Error executing updater binary in zip
I did all the previus steps phone LG L90 d405n is rooted and bootloader is unlocked and rom downgraded to KK v10b
Now I want to flash CM or RR rom but I simply can't!
First I was getting error 7 when flashing I found out that I need TWRP 2.8.7 build 2 to flash so I found it and flashed. Now I'm getting ''error executing updater binary in zip twrp'' and I can't flash any rom.?*
I tried deleting first assert lines in updater-script from this?*thread?*but It didn't helped in any way...
Any ideas? Why the hell it is so ****ing complicated to flash custom on this ****ty device? Can't it work like Nexus4 or any other normal device??*
Thanks in advance for any tips&trics
PS. I can't open new thread dunno why...

amonlb said:
Hello,
Help me please I'm getting Error 7 and after twrp reflash Error executing updater binary in zip
I did all the previus steps phone LG L90 d405n is rooted and bootloader is unlocked and rom downgraded to KK v10b
Now I want to flash CM or RR rom but I simply can't!
First I was getting error 7 when flashing I found out that I need TWRP 2.8.7 build 2 to flash so I found it and flashed. Now I'm getting ''error executing updater binary in zip twrp'' and I can't flash any rom.?*
I tried deleting first assert lines in updater-script from this?*thread?*but It didn't helped in any way...
Any ideas? Why the hell it is so ****ing complicated to flash custom on this ****ty device? Can't it work like Nexus4 or any other normal device??*
Thanks in advance for any tips&trics
PS. I can't open new thread dunno why...
Click to expand...
Click to collapse
First of all, you don't need to use that TWRP build, you can use the latest one. To fix the only errors that should appear (Updater error 7 and 6), delete the first lines of updater-script until you reach the ui_print part (the first line of your file should be "ui_print("Target: 1471683591");"). Also, delete any double spaces that exist (there should be two, one before "abort" at line 27 and the other before "abort" at line 30). If it still gives the same error, try wiping Cache, data, system and dalvik-cache partitions, try to install the ROM, it'll give the error. Now, reboot your phone and try to install without wiping anything. (To properly see the line indications, open the file using Notepad++)

TWRP, ROOT and disable Encryption for Yoga Tab 3 Plus (YT-X703F/L)

TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
Click to expand...
Click to collapse
WARNING!!! Be careful what you do here. One mistake and the device is soft-bricked. I take no responsibility for bricked devices, lost warranty or even OTAs not working!! Booting and/or flashing files from this post is on your own risk.
Requirements
Unlocked bootloader
Yoga Tablet 3 Plus with and without LTE (YT-X703L and YT-X703F) are supported
Known Issues
WARNING! Our device uses dm-verity (verified boot). The system partition should remain read-only. Otherwise a bootloop will occur. You can flash my modified kernel or SuperSU to resolve this but OTA's are no longer possible! You have to restore a factory image or clean system backup to receive OTAs
Potentially DRM keys are lost! Pure unlocking and rooting does not cause the issue. However, there have been reports of lost DRM keys by some unknown action. It is advised to act with caution. Losing your DRM keys can lead to issues with some apps which use DRM which could then have limited or no functionality. E.g. Netflix will only stream in SD (480p). You can check with DRM info if you still have L1 security level which means DRM keys are intact.
Download
Official TWRP for YT-X703F (Wifi): twrp.me
Official TWRP for YT-X703L (LTE): twrp.me
Instructions
Install fastboot and adb on your PC, e.g. from here
Enable developer options and in there select to unlock your bootloader by enabling OEM unlock and enable USB debugging
Connect your PC to your tablet and run
Code:
adb reboot bootloader
using adb on command line. The tablet will reboot into bootloader mode where you will only see the Lenovo logo. Now you use
Code:
fastboot oem unlock-go
to unlock. This will factory reset your device
Setup the tablet again and reboot again to the bootloader
Then run
Code:
fastboot boot twrp-3.2.1-0-yt_x703f.img
to temporarily boot into TWRP. You can also flash if you are sure
Select to keep system read only when TWRP starts to avoid modification which will make OTAs impossible
Optionally flash SuperSU or Magisk in TWRP which should install system less. Keep OEM unlock enabled if you flash or modify anything
Additional Downloads
Backup of original boot, recovery and system image for YT-X703F S000936: MEGA
Modified Boot image with forceencrypt disabled and it switches off CABC fully. You need to factory reset after flashing to format data without encryption boot_yt_x703f_s000963_noforceencrypt_cabc.img (YT-X703F S000963) / boot_yt_x703l_s000963_noforceencrypt_cabc.img (YT-X703L S000963) . Use
Code:
fastboot flash boot boot_yt_x703f_s000963_noforceencrypt_cabc.img
to flash the kernel in fastboot. SuperSU or Magisk should be flashed afterwards if root is desired.
Full factory images with flash tool and instructions YT_X703F_S000689, YT_X703L_S000704, YT_X703F_S000725, YT_X703L_S000725, YT_X703F_S000734, YT_X703L_S000734, YT_X703L_S000744, YT-X703F_S000744, YT-X703L_S000963, YT-X703F_S000963 and OTA updates: MEGA (These images contain the individual boot, recovery and system images that you need to restore from any modification mentioned above)
System Updates (OTA)
In order to successfully apply Lenovo system updates after root you have to restore the original boot, recovery (if you flashed TWRP) and system partitions from your current installed version (e.g. S000744) for your variant of the tablet. This will NOT delete your apps and data but will unroot. Note that OTAs are block based and always check the contents of most of the partitions. This means that all of these partitions (except your data) have to be original and have to be on the exact same version (e.g. S000734) for the update to succeed.
See here for instructions how to restore the partitions with fastboot.
Credits
@pogo1975 - for providing the factory images and fixing the AV sync issue
@launcher20 and @deecept - for testing the LTE version
TeamWin
Changelog
v4:
Now official TWRP with version 3.0.3-0
v3:
enable full disk encryption for access to the encrypted data partition
update TWRP kernel to latest S000725 version
v2:
add support for LTE variant (YT-X703L)
add further mount points to be able to backup more data

Thanks buddy! You are an absolute champion! Tell me what you need me to do and I'll do it before rooting and up load what you need.

Doing good work here.
Who wants to bet on a race between matshias and Lenovo support for who can fix the issues with this device first?

That's great and fast, I'm thinking tab 3 plus is getting hot now.

Great to see there is something moving for the yoga now. You think it will support the lte Version anytime? Or maybee even lineageos?

so you know, i've managed to install xposed thanks to this thread https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and is working well.

wayney said:
Thanks buddy! You are an absolute champion! Tell me what you need me to do and I'll do it before rooting and up load what you need.
Click to expand...
Click to collapse
Well if you haven't modified anything yet then it'd be great if you can boot into TWRP with system read only and then connect via ADB to the tablet with a big SD card inserted which has enough free space (4 GB).
The run the following command
Code:
dd if=/dev/block/bootdevice/by-name/system of=/sdcard1/system.img
This will take a while. Then copy the file system.img from your SD card to a PC and zip it (or 7z, rar). Then upload it

Gogoho said:
Great to see there is something moving for the yoga now. You think it will support the lte Version anytime? Or maybee even lineageos?
Click to expand...
Click to collapse
The LTE variant is probably very similar and it wouldn't be much work. But I don't own the device, so I would need some help. So someone with the LTE variant who is not afraid to experiment with fastboot and adb and who can provide me with the details needed I am happy to compile a TWRP for it.
LineageOS is much much more work than TWRP. For an experienced cyanogenmod/LineageOS dev it is not much of a thing and would take only a few days, especially since it is a Qualcomm device and there are already ports for devices with SD 652. But for me this is new as well so it'll take much longer. As soon as I have time I'll look into it.

matshias said:
Well if you haven't modified anything yet then it'd be great if you can boot into TWRP with system read only and then connect via ADB to the tablet with a big SD card inserted which has enough free space (4 GB).
The run the following command
Code:
dd if=/dev/block/bootdevice/by-name/system of=/sdcard1/system.img
This will take a while. Then copy the file system.img from your SD card to a PC and zip it (or 7z, rar). Then upload it
Click to expand...
Click to collapse
You forgot to tell me to go to adb shell :silly:
DD is currently doing a dump, non interactive so I hope it is still alive, it has been close to 1 hour so far. I will upload the clean image once it is done and await further instructions from you. :good:
I'm in Perth, Western Australia (UTC +8:00), so we might be playing timezone tag.

wayney said:
You forgot to tell me to go to adb shell :silly:
DD is currently doing a dump, non interactive so I hope it is still alive, it has been close to 1 hour so far. I will upload the clean image once it is done and await further instructions from you. :good:
I'm in Perth, Western Australia (UTC +8:00), so we might be playing timezone tag.
Click to expand...
Click to collapse
I think I forgot one more thing. The external SD card needs to be mounted in the TWRP menu. I believe it's not mounted automatically. So the DD command does nothing. It shouldn't take that long. Sorry about that!
It's UTC +1:00 here in Germany

matshias said:
Well if you haven't modified anything yet then it'd be great if you can boot into TWRP with system read only and then connect via ADB to the tablet with a big SD card inserted which has enough free space (4 GB).
The run the following command
Code:
dd if=/dev/block/bootdevice/by-name/system of=/sdcard1/system.img
This will take a while. Then copy the file system.img from your SD card to a PC and zip it (or 7z, rar). Then upload it
Click to expand...
Click to collapse
matshias said:
I think I forgot one more thing. The external SD card needs to be mounted in the TWRP menu. I believe it's not mounted automatically. So the DD command does nothing. It shouldn't take that long. Sorry about that!
It's UTC +1:00 here in Germany
Click to expand...
Click to collapse
I was wondering why nothing was happening after 3 hours.
I have rared it and it is uploading at the moment, it is going to take 5 hours.

wayney said:
I was wondering why nothing was happening after 3 hours.
I have rared it and it is uploading at the moment, it is going to take 5 hours.
Click to expand...
Click to collapse
Wow ok. Well thanks a lot for your efforts. This will not just help me but anyone with modified system partition to get OTAs.

Unmodified System Image
Here is the vanilla image via DD of the system partition.
Software Version : YT-X703F_160817
Android Version : 6.0.1
Security Patch Level : 1 September 2016
Kernel Version : 3.10.84-perf
Build Number : YT-X703F_S000689_161105_ROW
Tablet purchased retail from Australia.
https://mega.nz/#!bos0GIjI!vcO9dpSJX...Grjb7k3z6mjnqA

wayney said:
Here is the vanilla image via DD of the system partition.
Software Version : YT-X703F_160817
Android Version : 6.0.1
Security Patch Level : 1 September 2016
Kernel Version : 3.10.84-perf
Build Number : YT-X703F_S000689_161105_ROW
Tablet purchased retail from Australia.
https://mega.nz/#!bos0GIjI
Click to expand...
Click to collapse
Perfect!!
Can you send me the key for the download via PM or post it?

matshias said:
Perfect!!
Can you send me the key for the download via PM or post it?
Click to expand...
Click to collapse
Let's try that again.
https://mega.nz/#!bos0GIjI!vcO9dpSJXp6cKtdH07Kt0RSaqpqQ7Grjb7k3z6mjnqA

matshias said:
Wow ok. Well thanks a lot for your efforts. This will not just help me but anyone with modified system partition to get OTAs.
Click to expand...
Click to collapse
Thank you guys for spending times on it, it would be wonderful if Lenovo people do thing like this way, too.

In the depths of the Russian Internet i have found this
YT-X703F_USR_S000689_1611051146_Q00237_ROW.zip
https://drive.google.com/drive/folders/0B_jGuhC9WsNfYUZzZmhRY2NhQlU?usp=sharing
it is supose to be complete image to Wifi-Version.
I HAVE NOT FLASHED THIS YET. Do it on your risk.

pogo1975 said:
In the depths of the Russian Internet i have found this
YT-X703F_USR_S000689_1611051146_Q00237_ROW.zip
https://drive.google.com/drive/folders/0B_jGuhC9WsNfYUZzZmhRY2NhQlU?usp=sharing
it is supose to be complete image to Wifi-Version.
I HAVE NOT FLASHED THIS YET. Do it on your risk.
Click to expand...
Click to collapse
Hahaha got to love the dark corner of the Russian internets :laugh:

pogo1975 said:
In the depths of the Russian Internet i have found this
YT-X703F_USR_S000689_1611051146_Q00237_ROW.zip
https://drive.google.com/drive/folders/0B_jGuhC9WsNfYUZzZmhRY2NhQlU?usp=sharing
it is supose to be complete image to Wifi-Version.
I HAVE NOT FLASHED THIS YET. Do it on your risk.
Click to expand...
Click to collapse
If that's real it would have saved me a lot of time finding the loophole in the system to extract the boot and recovery image. But still a great find which will rescue some soft-bricked devices.

matshias said:
If that's real it would have saved me a lot of time finding the loophole in the system to extract the boot and recovery image. But still a great find which will rescue some soft-bricked devices.
Click to expand...
Click to collapse
so long as it's safe and not loaded with malware...

[Guide] [SM-T515] android 9 Install custom ROM'S and ROOT

SIZE="6"]Use this guide if your tablet is running on android 9. Android 10 is not covered in this guide[/SIZE]
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.

one last question
massivekind said:
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.
Click to expand...
Click to collapse
you have been very kind. I'd like to ask you one last question. for the t515 (since the lineage os is generic) do you also use a particular kernel (which optimizes performance maybe) ?. thanks

gcomunale71 said:
Instructions:
you have been very kind. I'd like to ask you one last question. for the t515 (since the lineage os is generic) do you also use a particular kernel (which optimizes performance maybe) ?. thanks
Click to expand...
Click to collapse
No I don't have any, but if there is one for the 510 give it a try.
Of course backup before flashing

Hi,
Thanks for the guide. Which ROM you recommend? Everything working for you (LTE modem etc)?
Can you now install 64bit apps from Google Play? Any chance you can check if the DJI Fly app is working on your SM-T515?
https://play.google.com/store/apps/details?id=dji.go.v5
Thanks

liamR said:
Hi,
Thanks for the guide. Which ROM you recommend? Everything working for you (LTE modem etc)?
Can you now install 64bit apps from Google Play? Any chance you can check if the DJI Fly app is working on your SM-T515?
https://play.google.com/store/apps/details?id=dji.go.v5
Thanks
Click to expand...
Click to collapse
Well, It's still a 32bit rom. I've tried to install the app but I'm unable (prob because the app is 64bit)
Everything works fine, I'm running the lineageOS ROM. I have a data bundle and I'm able to internet with it (if I want )

massivekind said:
Well, It's still a 32bit rom. I've tried to install the app but I'm unable (prob because the app is 64bit)
Everything works fine, I'm running the lineageOS ROM. I have a data bundle and I'm able to internet with it (if I want )
Click to expand...
Click to collapse
I thought that this custom ROM is 64bit
When I bought the TAB A I thought it's a bargain, I didn't know that I wouldn't be able to install 64bit apps.

massivekind said:
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.
Click to expand...
Click to collapse
first of all thanks for the great work.
Sorry if this is a stupid question , but before i brick my new SM-T515 I would rather ask the experts.
Now, i have rooted the stock ROM folowing the steps in https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root with no TWRP and want to install one of the custom ROMs you have tested.
will I lose root if flash the Legion ROM GSI?
if yes, can you please put some steps together to root and install TWRP?
i still have the “magisk_patched.tar" from the stock ROM, would that work for the Legion ROM GSI?

dj-rjay said:
Instructions:
first of all thanks for the great work.
Sorry if this is a stupid question , but before i brick my new SM-T515 I would rather ask the experts.
Now, i have rooted the stock ROM folowing the steps in https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root with no TWRP and want to install one of the custom ROMs you have tested.
will I lose root if flash the Legion ROM GSI?
if yes, can you please put some steps together to root and install TWRP?
i still have the “magisk_patched.tar" from the stock ROM, would that work for the Legion ROM GSI?
Click to expand...
Click to collapse
In theory it should work. I've already covered "root" also in the guide

I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?

Sambuca11 said:
I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?
Click to expand...
Click to collapse
Mm strange, i don't use both functions so I can't really help you.
Maybe you could format the sd card via twrp?
On my side the sd card works. Didn't format the sd card so don't really know

Sambuca11 said:
I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?
Click to expand...
Click to collapse
I have the same issue. Any solution?

zamboj said:
I have the same issue. Any solution?
Click to expand...
Click to collapse
I haven't found one yet, I'm going to try go back to Stock as I need my computer to be able to see the tablet to transfer files over. I've tried installing the Legion custom rom and it does the same thing. I'm not sure but I'd love to get an answer to this and I'd love to use a custom rom.
Are there any other Android 10 roms that I could try?

Sambuca11 said:
I haven't found one yet, I'm going to try go back to Stock as I need my computer to be able to see the tablet to transfer files over. I've tried installing the Legion custom rom and it does the same thing. I'm not sure but I'd love to get an answer to this and I'd love to use a custom rom.
Are there any other Android 10 roms that I could try?
Click to expand...
Click to collapse
I have a work app that need a little more ram: the solution is LineageOs (used 1,2gb vs 1,5gb of the stock rom) and I transfer files through recovery. I tried LegionOS but is full of bugs and file transfer doesn't work the same.

I'm back to stock and my computer and can see my table and the SD card is working fine. Its a shame as I'd love to use LineageOS but for now I'm stuck on stock.

I don’t know what I’m doing wrong so need some help please. I’ve installed TWRP and multidisabler. I’ve wiped the system cache data etc like I was flashing a custom rom.
I’ve downloaded the rom from the links flashed it via system image but I still get the message no os installed rebooted and just a bootloop saying unlocked boot loader press power button to start then nothing no booting image from linageos. Just repeats.
Can anybody tell me or guide me on what I could have done wrong and what what I should being

daljitbanga said:
I don’t know what I’m doing wrong so need some help please. I’ve installed TWRP and multidisabler. I’ve wiped the system cache data etc like I was flashing a custom rom.
I’ve downloaded the rom from the links flashed it via system image but I still get the message no os installed rebooted and just a bootloop saying unlocked boot loader press power button to start then nothing no booting image from linageos. Just repeats.
Can anybody tell me or guide me on what I could have done wrong and what what I should being
Click to expand...
Click to collapse
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.

Thanks for the reply I will try that when I get home later in the day and will post the outcome after.
Are there any other roms the we could also try.

massivekind said:
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.
Click to expand...
Click to collapse
I followed what you said but I’m stilling getting the bootloop for some reason could share links of what rom you downloaded and etc.
Because there must be a mistake in making.
Also to what I’ve been reading is that I need something of treble enabler for the device but I really don’t know.

massivekind said:
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.
Click to expand...
Click to collapse
I finally managed to get LineageOS installed. I just deleted all the files and redone loaded them, returned back to stock and did the whole process all over again.
And it worked. ? ? so maybe somewhere down the line put have been a corrupt download or something.
Custom rom has whole different feeling on the tablet now. Thanks again for tutorial, I’ve been waiting for something like this for a while.
You don’t know of any other roms there out there to try?

daljitbanga said:
I finally managed to get LineageOS installed. I just deleted all the files and redone loaded them, returned back to stock and did the whole process all over again.
And it worked. ? ? so maybe somewhere down the line put have been a corrupt download or something.
Custom rom has whole different feeling on the tablet now. Thanks again for tutorial, I’ve been waiting for something like this for a while.
You don’t know of any other roms there out there to try?
Click to expand...
Click to collapse
You've could try havoc os https://sourceforge.net/projects/ha...v3.5-20200522-Official-a64-ab.img.xz/download
Topic over here, I'm not sure if there are things not working, thats something you'd could figure out
https://forum.xda-developers.com/galaxy-tab-a/how-to/rom-havocos-v3-5-treble-guide-t4108127
I didn't tried this one, but is could be an option

[RECOVERY][OneUI-2.5][UNOFFICIAL] TWRP 3.4.0_10.0 For Samsung M51 - Final

*** WARNING ***​This version of TWRP is not compatible with Samsung android 11 (OneUI 3.1) release and it won't work if you have updated your phone to that android version
If you need more detailed steps of what do then wait for my complete guide
I'M NOT RESPONSIBLE IF YOU BRICKED YOUR DEVICE BECAUSE YOU ARE STILL NEWBIE
This is recovery won't get further updates or support​
Bugs
-Userdata decryption is not working so you should use an external SD or USB OTG for putting ZIPs and IMGs on it in order to flash them
How to Install
1. Unlock your bootloader
2. Boot to Odin mode
3. Check AP box and select TWRP tar file
3. Hit start
4. Have fun
Download
TWRP 3.4.0_10 - Stable 1
Sources
TWRP device tree: https://github.com/Lehkeda/android_device_samsung_m51_pbrp/tree/android-10_pbrp/
Kernel source: https://github.com/Lehkeda/android_kernel_samsung_m51/tree/ten

Change Log:
Stable 1 - 19th of December 2020
- Fix MTP
- Fix data partition mounting
- Fix system image flashing
Beta 2 - 16th of December 2020
- Fix ADB
- Fix mounting partitions (Except userdata)
- Fix navigation bar
- Fix CPU temperature
- Add reboot to download mode
Beta 1 - 12th of December 2020
- Initial Release

F.A.Q
How to mount system root to flash ZIPs and other stuff?
-Go to Advanced > terminal
-Type "mkdir /system_root"
-Type "mount /dev/block/mapper/system /system_root"
How to mount data partition?
-Go to Advanced > terminal
-Type "mount /dev/block/by-name/userdata /data"

Thanks man. I ll try to fix mtp , storage and scaling.

bekirakil said:
Thanks man. I ll try to fix mtp , storage and scaling.
Click to expand...
Click to collapse
Storage is partially fixed now.
For MTP, I compiled the kernel without Samsung MTP and it's Kinda working... adb can detect it now, but it still now showing on my computer
I need to add a proper init stuff for it

i was able to fix mount sdcard but i couldn't fix data im working on it

The encryption is really annoying

That was the best i could do. Data mounting is not working because of encryption. I couldn't find the key directory of the encryption. But you can flash from external sd.

Hello. Backup, Restore, running smoothly? Can I back up without problems? Thank you very much, thank you.

onurmemo77 said:
Hello. Backup, Restore, running smoothly? Can I back up without problems? Thank you very much, thank you.
Click to expand...
Click to collapse
It would be nice if you can test that for me as I'm not able to test right now!

LahKeda said:
It would be nice if you can test that for me as I'm not able to test right now!
Click to expand...
Click to collapse
Sure, I'll help.
But I couldn't download the new version of the twrp. Would you please upload to sites like media fire gdrive? Thank you very much, thank you.

onurmemo77 said:
Sure, I'll help.
But I couldn't download the new version of the twrp. Would you please upload to sites like media fire gdrive? Thank you very much, thank you.
Click to expand...
Click to collapse
Download it from a pc or activate desktop site option before downloading it or click on download it anyway link

Can you give me your email please? I need your help at my project. Maybe you can help. (Sorry for my bad english i'm german )

bekirakil said:
Can you give me your email please? I need your help at my project. Maybe you can help. (Sorry for my bad english i'm german )
Click to expand...
Click to collapse
DM me at telegram @lehkeda

The userdata decryption bug, does that mean it can't access the phone's storage in TWRP?

Camack said:
The userdata decryption bug, does that mean it can't access the phone's storage in TWRP?
Click to expand...
Click to collapse
Yes, but you can still access the data on USB device or external sdcard

@LahKeda After installing TWRP and flashing Magisk, do I need to press power and volume up button every time I restart the phone to have Magisk root or can I boot it normally without pressing anything?

swiftez said:
@LahKeda After installing TWRP and flashing Magisk, do I need to press power and volume up button every time I restart the phone to have Magisk root or can I boot it normally without pressing anything?
Click to expand...
Click to collapse
+1 would like to know too as the current root method patching boot.img with Magisk, you have to press power and volume up every time you restart the phone to keep root.

Thanks for the recovery. I have a question. Can I simply flash this via odin (no stock firmware download required) and it will work? I'm asking because in the other twrp thread there is a requirement of downloading and flashing stock firmware. The firmware for my region hasn't released yet.

Affangta said:
Thanks for the recovery. I have a question. Can I simply flash this via odin (no stock firmware download required) and it will work? I'm asking because in the other twrp thread there is a requirement of downloading and flashing stock firmware. The firmware for my region hasn't released yet.
Click to expand...
Click to collapse
Yes, no need to flash stock firmware at all.