Hello everyone. It is my first time on this forum, so please be patient.
On Saturday I received my new HTC One 802d dual sim. Following in the steps of this and other forums I could root it and unlock the bootloader.
Then I wanted to get S-Off for putting on a new ROM but while the Moonshine was running, in one of the many resets, the phone can't start the OS (obviously cmd window showed an error).
From there on I tried a myriad of things but with no success. I could not find the original RUU to flash it either.
I am truly desperate!!!! can anyone help ???
I leave data from my HTC One:
l
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 1.01.32.0917
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.35.707.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: A********************66
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4330mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-8076a49a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Android 4.2.2
HTC Sence 5.0
Soft Number 2.35.707.2
HTC SDK API level 5.34
PRI Version 4.20_09A
PRL Version 10014
Kernel 3.4.10-g8914e14
Baseband Version 1.01.32.0917-1237.25.32.0717
Biuld Number 2.35.707.2 CL257405
Browser version WebKit/534.30
THANKS YOU!!!!!
pdelmazo said:
Hello everyone. It is my first time on this forum, so please be patient.
On Saturday I received my new HTC One 802d dual sim. Following in the steps of this and other forums I could root it and unlock the bootloader.
Then I wanted to get S-Off for putting on a new ROM but while the Moonshine was running, in one of the many resets, the phone can't start the OS (obviously cmd window showed an error).
From there on I tried a myriad of things but with no success. I could not find the original RUU to flash it either.
I am truly desperate!!!! can anyone help ???
I leave data from my HTC One:
l
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 1.01.32.0917
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.35.707.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: Remove
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4330mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-8076a49a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Android 4.2.2
HTC Sence 5.0
Soft Number 2.35.707.2
HTC SDK API level 5.34
PRI Version 4.20_09A
PRL Version 10014
Kernel 3.4.10-g8914e14
Baseband Version 1.01.32.0917-1237.25.32.0717
Biuld Number 2.35.707.2 CL257405
Browser version WebKit/534.30
THANKS YOU!!!!!
Click to expand...
Click to collapse
You might want to remove your meid from your first post.
Assuming you have a custom recovery installed, you might try to install Maximus HD for dual sim. I found these instructions in his other thread for the single sim rom. Why don't you think you have a rom installed? Are you stuck in bootloader? You can follow these instructions by alray but you must use a custom recovery for your variant and the Maximus HD rom for your variant.
If you get the rom installed and working, I would try rumrunner S-OFF, since you have a lower hboot. Since you have such a unique phone, I would make nandroid backups to I could recover from issues easier. I hope it helps.
majmoz said:
You might want to remove your meid from your first post.
Assuming you have a custom recovery installed, you might try to install Maximus HD for dual sim. I found these instructions in his other thread for the single sim rom. Why don't you think you have a rom installed? Are you stuck in bootloader? You can follow these instructions by alray but you must use a custom recovery for your variant and the Maximus HD rom for your variant.
If you get the rom installed and working, I would try rumrunner S-OFF, since you have a lower hboot. Since you have such a unique phone, I would make nandroid backups to I could recover from issues easier. I hope it helps.
Click to expand...
Click to collapse
Thank you very much!!!! I'll try to flash Maximus HD, but I have a few questions:
The phone has to be unlocked?
What would be the details to consider the rom to choose?
Thanks!!!!
pdelmazo said:
Thank you very much!!!! I'll try to flash Maximus HD, but I have a few questions:
The phone has to be unlocked? Yes, the phone has to be unlocked!
What would be the details to consider the rom to choose? The rom must be for your variant, if you flash a rom that is not designed for your variant you can brick your phone. There are not a lot of choices for your variant!
Thanks!!!!
Click to expand...
Click to collapse
See answers in Magenta. You should check out the Mega-Guide All about HTC One Dual Sim and the Collection of HTC One Dual Sim RUU, OTA, Firmware, etc..
majmoz said:
See answers in Magenta. You should check out the Mega-Guide All about HTC One Dual Sim and the Collection of HTC One Dual Sim RUU, OTA, Firmware, etc..
Click to expand...
Click to collapse
hello again.
Yesterday I could finally install the maximushd 1.0 as the 3.0 but in both cases when phone restarted, it made a boot loop again. Might be corrupt the hboot? There is way to fix it? another idea? Thank you
majmoz said:
See answers in Magenta. You should check out the Mega-Guide All about HTC One Dual Sim and the Collection of HTC One Dual Sim RUU, OTA, Firmware, etc..
Click to expand...
Click to collapse
pdelmazo said:
hello again.
Yesterday I could finally install the maximushd 1.0 as the 3.0 but in both cases when phone restarted, it made a boot loop again. Might be corrupt the hboot? There is way to fix it? another idea? Thank you
Click to expand...
Click to collapse
Hi...
Finally I flash the boot.img boot with a RUU for my HTC.
Now the phone starts, passes the first HTC screen and tries to show the desktop but goes black .... can only see the top bar with the time and the GSM signal ... then it reboots again.
I dont know what else to do....
Plaese Help Me!!!!
Thanks
pdelmazo said:
Hi...
Finally I flash the boot.img boot with a RUU for my HTC.
Now the phone starts, passes the first HTC screen and tries to show the desktop but goes black .... can only see the top bar with the time and the GSM signal ... then it reboots again.
I dont know what else to do....
Plaese Help Me!!!!
Thanks
Click to expand...
Click to collapse
This is a long shot but first I would try to flash the stock firmware 4.22.707.3. You will need to lock your bootloader first. This firmware will wipe your personnal data from the phone.
First, download the firmware file and rename it firmware.zip and place in your adb/fastboot folder.
Second, relock you phone using this command:
Code:
fastboot oem lock
Third, use the following procedure to flash the stock firmware to your phone:
Code:
fastboot reboot-bootloader
After that, type:
Code:
fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
fastboot flash zip firmware.zip[/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
fastboot reboot
majmoz said:
This is a long shot but first I would try to flash the********* You will need to lock your bootloader first. This firmware will wipe your personnal data from the phone.
First, download the firmware file and rename it firmware.zip and place in your adb/fastboot folder.
Second, relock you phone using this command:
Code:
fastboot oem lock
Third, use the following procedure to flash the stock firmware to your phone:
Code:
fastboot reboot-bootloader
After that, type:
Code:
fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
fastboot flash zip firmware.zip[/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
fastboot reboot
Click to expand...
Click to collapse
that was amazing !!!!!
It really works !!! I only doubt is .... I can not seem to turn on the wifi .... how do I fix it? or you install the MaximusHD now ....?
Can I pay you for your help? I would like to do
I will waiting
pdelmazo said:
that was amazing !!!!!
It really works !!! I only doubt is .... I can not seem to turn on the wifi .... how do I fix it? or you install the MaximusHD now ....?
Can I pay you for your help? I would like to do
I will waiting
Click to expand...
Click to collapse
Thanks is enough for helping you out.
Wifi might be a software issue, with the new firmware you got the latest radio for your phone. If you still have the stock rom installed you could try the OTA update? If the rom is stock and the recovery is stock you could rename (to shorten it) and move the OTA to your sdcard. When it is on your sdcard, follow these steps for installing the OTA manually. It may or may not run, but if it fails it will tell you why it failed and maybe we can fix it.
majmoz said:
Thanks is enough for helping you out.
Wifi might be a software issue, with the new firmware you got the latest radio for your phone. If you still have the stock rom installed you could try the OTA update? If the rom is stock and the recovery is stock you could rename (to shorten it) and move the OTA to your sdcard. When it is on your sdcard, follow these steps for installing the OTA manually. It may or may not run, but if it fails it will tell you why it failed and maybe we can fix it.
Click to expand...
Click to collapse
Hi....
The phone has installed Android 4.4.2, HTC Sence 6.0 from MaximusHD 3.0
Should I also install this OTA?
pdelmazo said:
Hi....
The phone has installed Android 4.4.2, HTC Sence 6.0 from MaximusHD 3.0
Should I also install this OTA?
Click to expand...
Click to collapse
No, there is no stock rom for your phone! So, you can not go back to stock to get the OTA. Make a nandroid backup while in recovery and save it to your computer should something go amiss in the future. Glad to see you are back up and running.
Go to your first post and edit the title with "[Solved]".
majmoz said:
No, there is no stock rom for your phone! So, you can not go back to stock to get the OTA. Make a nandroid backup while in recovery and save it to your computer should something go amiss in the future. Glad to see you are back up and running.
Go to your first post and edit the title with "[Solved]".
Click to expand...
Click to collapse
Ok I'll do it ... thank you very much for everything.
So I can not do anything to solve the problem wifi?
pdelmazo said:
Ok I'll do it ... thank you very much for everything.
So I can not do anything to solve the problem wifi?
Click to expand...
Click to collapse
What specifically is wrong with wifi?
Are you getting data?
Does SMS/MMS work?
No issues with calls?
Have you tried rebooting the phone?
majmoz said:
What specifically is wrong with wifi?
Are you getting data?
Does SMS/MMS work?
No issues with calls?
Have you tried rebooting the phone?
Click to expand...
Click to collapse
Yes, I have restarted the phone twice but no Wifi on when I touch the button. Nor have 3G / H + data.
Calls and SMS work fine.
Should I reinstall ROM?
pdelmazo said:
Yes, I have restarted the phone twice but no Wifi on when I touch the button. Nor have 3G / H + data.
Calls and SMS work fine.
Should I reinstall ROM?
Click to expand...
Click to collapse
Yes, re-install the ROM and while in recovery wipe cache/dalvik. And check your APN settings against the APN settings for your carrier.
majmoz said:
Yes, re-install the ROM and while in recovery wipe cache/dalvik. And check your APN settings against the APN settings for your carrier.
Click to expand...
Click to collapse
Hi friend, i'm here again.
I had to reflash my phone with help from llabtoofer.com
We were able to fix the Wifi but the phone does not work on 3G network... only on EDGE.
Could be a problem with the Firmware or with the Radio?
I just called the telephone's company and they said that APN configuration was ok. If you want, I can send you a copy.
I'm in Argentina, Latin America.... perhaps the ROM installed is from Europe or perhaps is not compatible with my M7C_DWG.
Can you help me one more time?
Thanks.... I will waiting.
pdelmazo said:
Hi friend, i'm here again.
I had to reflash my phone with help from llabtoofer.com
We were able to fix the Wifi but the phone does not work on 3G network... only on EDGE.
Could be a problem with the Firmware or with the Radio?
I just called the telephone's company and they said that APN configuration was ok. If you want, I can send you a copy.
I'm in Argentina, Latin America.... perhaps the ROM installed is from Europe or perhaps is not compatible with my M7C_DWG.
Can you help me one more time?
Thanks.... I will waiting.
Click to expand...
Click to collapse
An earlier post stated that you had MaximusHD 3.0 installed. According to the website it doesn't support your phone! However, your software information has just the stock rom not MaximusHD 3.0. I don't thing there is an RUU for your phone so if you can find someone with a nandroid backup that you could use it would help. If you could get the stock firmware and flash it. Sorry, I'm not much help.
majmoz said:
An earlier post stated that you had MaximusHD 3.0 installed. According to the website it doesn't support your phone! However, your software information has just the stock rom not MaximusHD 3.0. I don't thing there is an RUU for your phone so if you can find someone with a nandroid backup that you could use it would help. If you could get the stock firmware and flash it. Sorry, I'm not much help.
Click to expand...
Click to collapse
Ok, thank you very much.
I will keep looking for a solution.... When I have it, I'll let you know.
Thaks.
Related
I put stock back on my phone "Guru_Reset_M7_2.24.771.3.zip" which I have done before without any problem.
Stock rom flashed fine, boots up fine and start reinstalling apps etc, OTA firmware starts downloading sense 5.5 etc
Install OTA update and then restart then phone just shows white background with htc logo then bootloops.
Tried going into recovery, restarting, power down, factory reset etc, doesn't work so I do fastboot oem relock to see if it helps.
So basically it's boot looping and now I have no idea how to fix it
EDIT: - I Wiped, reinstalled stock rom and tried again, SAME PROBLEM.
Anarchy89 said:
Hey guys I'll try and keep it short and sweet.
So here's what happened.
I installed android revolution HD 71.1 no problems, notice mobile signal is weak 1-2 bars I normally have 4-5 so I searched and someone said maybe firmware is not up to date.
So I wipe the rom and put stock back on there "Guru_Reset_M7_2.24.771.3.zip" which I have done before without any problem.
Stock rom flashed fine, boots up fine and start reinstalling apps etc, OTA firmware starts downloading sense 5.5 etc
Install OTA update and then restart then phone just shows white background with htc logo then bootloops.
Tried going into recovery, restarting, power down, factory reset etc, doesn't work so I do fastboot oem relock to see if it helps.
So basically it's boot looping and now I have no idea how to fix it, please help, it will be so appreciated
Click to expand...
Click to collapse
If you can flash and access custom recovery, adb push or adb sideload a custom rom..
thanks, I'm making progress, I unlocked the bootloader again and am reflashing the stock firmware...
I flashed stock firmware and stock recovery and downloaded and installed the OTA update and it's doing the same thing!! why?
Just bootlooping
Anarchy89 said:
I flashed stock firmware and stock recovery and downloaded and installed the OTA update and it's doing the same thing!! why?
Just bootlooping
Click to expand...
Click to collapse
Links to stock firmware and stock recovery?
Maybe something is wrong with the phone??
Your best start will be to flash a custom recovery and then flash a custom rom. What is the output of your fastboot getvar all ? (remove IMEI)
SaHiLzZ said:
Links to stock firmware and stock recovery?
Maybe something is wrong with the phone??
Your best start will be to flash a custom recovery and then flash a custom rom. What is the output of your fastboot getvar all ? (remove IMEI)
Click to expand...
Click to collapse
He is using this correct ?: http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
He is having exactly the same problem as someone I was trying to help out who is having exactly the same issue and may join in this thread.
The guru reset puts them on 4.2.2 which works fine then they get a small OTA which installs fine, then a big update to 4.3 which installs, but upon restart for some reason gives a boot loop, doesn't get past the HTC quietly brilliant logo, im at a loss.
Seanie280672 said:
He is using this correct ?: http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
He is having exactly the same problem as someone I was trying to help out who is having exactly the same issue and may join in this thread.
The guru reset puts them on 4.2.2 which works fine then they get a small OTA which installs fine, then a big update to 4.3 which installs, but upon restart for some reason gives a boot loop, doesn't get past the HTC quietly brilliant logo, im at a loss.
Click to expand...
Click to collapse
yes that's the exact one I am using
Seanie280672 said:
He is using this correct ?: http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
He is having exactly the same problem as someone I was trying to help out who is having exactly the same issue and may join in this thread.
The guru reset puts them on 4.2.2 which works fine then they get a small OTA which installs fine, then a big update to 4.3 which installs, but upon restart for some reason gives a boot loop, doesn't get past the HTC quietly brilliant logo, im at a loss.
Click to expand...
Click to collapse
Oh ok.. Interesting.
S-OFF, and move to .401 base perhaps?
SaHiLzZ said:
Oh ok.. Interesting.
S-OFF, and move to .401 base perhaps?
Click to expand...
Click to collapse
I did suggest that, but, somehow he never got the sense 6 update but is on hboot 1.57 and cant s-off
SaHiLzZ said:
Oh ok.. Interesting.
S-OFF, and move to .401 base perhaps?
Click to expand...
Click to collapse
Sorry I don't understand.
Also couldn't I circumvent this hassle just by installing this ROM?
http://forum.xda-developers.com/showthread.php?t=2224752
Seanie280672 said:
I did suggest that, but, somehow he never got the sense 6 update but is on hboot 1.57 and cant s-off
Click to expand...
Click to collapse
ODD! 4.2/4.3 should be on 1.55 Hboot..
@OP.. whats your fastboot getvar all ?
C:\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *******************
(bootloader) imei: *******************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3838mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
couldn't I circumvent this hassle just by installing this ROM?
http://forum.xda-developers.com/showthread.php?t=2224752
Its strange that you too have HBOOT 1.57, did you get the sense 6 update ?
Seanie280672 said:
Its strange that you too have HBOOT 1.57, did you get the sense 6 update ?
Click to expand...
Click to collapse
nope
Anarchy89 said:
couldn't I circumvent this hassle just by installing this ROM?
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
Yes... You have 1.57 HBOOT.. you should NOT be using 2.x.771.x files. It does NOT gel well.
You have to stick with custom roms, just use adb push or adb sideload..
Anarchy89 said:
nope
Click to expand...
Click to collapse
Well you could try flashing twrp 2.6.3.3 and then flash that ROM your interested in, but it could make things worse, you have a very strange problem, I would love to know why custom rom's work and the guru-reset file, but the OTA's pretty much kill your phone.
SaHiLzZ said:
Yes... You have 1.57 HBOOT.. you should NOT be using 2.x.771.x files. It does NOT gel well.
You have to stick with custom roms, just use adb push or adb sideload..
Click to expand...
Click to collapse
Okay, well I don't know a lot about all this stuff, for example I don't know what HBOOT is, S-OFF/ON etc, I just look for ROMs I'm interested in, optimizing my phone, I just read guides and 99% of the time I don't have a problem.
Do you think my problem would go away if I had HBOOT 1.55? Is it even possible to downgrade?
I'll just flash the ROM I mentioned...but doesn't that mean I won't be able to get OTA updates? (because of the nonstock recovery)
IDFK
Don't know why your HBOOT is 1:57 while your device is not OTA to Sense 6.0. Certainly you can't downgrage HBOOT to 1:55 without S-OFF. You should flash TWRP 2.6.3.3, then adb sileload a custom rom to install
I just wiped and put android revolution hd 71.1 on there and it seems fine now, the other stock rom I mentioned earlier I flashed and I kept getting errors "unfortunately updater has stopped working" every 3 minutes.
I had a go at S-OFF with rumrunner but it didn't work on two ROMs, someone said to try it on linux as it's more reliable, any suggestions for how I can easily S-OFF? thanks :good:
Hi, i run an HTC One M7 that was originally from AT&T. I unlocked it and use it in my country. Few days ago i wanted to install the stock Android and try it. I did everything as was said - unlocked the bootloader, s-off, recovery etc. after a few hours of the stock Android experience i wanted to change it to ARHD. As i changed it a question popped out asking if i want to root my device. I answered "yes", not knowing what it means. My phone was bricked and stuck on the HTC welcome screen since yesterday. I tried a lot of differend ways of fixing it and still no results. I locked and unlocked the bootloader again, tried to install the official RUU, but it doesn't want to. I get MTP driver error when connecting to my computer.
I have "can't mount SD card" on my phone. I'm pretty desperate, but i want to fix this issue and get back my phone. This will be a lesson for me.
Skyrocker94 said:
Hi, i run an HTC One M7 that was originally from AT&T. I unlocked it and use it in my country. Few days ago i wanted to install the stock Android and try it. I did everything as was said - unlocked the bootloader, s-off, recovery etc. after a few hours of the stock Android experience i wanted to change it to ARHD. As i changed it a question popped out asking if i want to root my device. I answered "yes", not knowing what it means. My phone was bricked and stuck on the HTC welcome screen since yesterday. I tried a lot of differend ways of fixing it and still no results. I locked and unlocked the bootloader again, tried to install the official RUU, but it doesn't want to. I get MTP driver error when connecting to my computer.
I have "can't mount SD card" on my phone. I'm pretty desperate, but i want to fix this issue and get back my phone. This will be a lesson for me.
Click to expand...
Click to collapse
post your fastboot getvar all minus the serial no and IMEI so we can find the files you'll need to restore you phone
clsA said:
post your fastboot getvar all minus the serial no and IMEI so we can find the files you'll need to restore you phone
Click to expand...
Click to collapse
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: --------------------
(bootloader) imei: -------------------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.120s
Here we go! thanks a lot!!
Skyrocker94 said:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: --------------------
(bootloader) imei: -------------------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.120s
Here we go! thanks a lot!!
Click to expand...
Click to collapse
download this ruu and run it, its the same version you already have / had on your phone, if you bootloader is unlocked then you will need to re-lock it first.
http://www.htc1guru.com/dld/ruu_m7_...9_10-26-1718-01l_release_356565_signed_2-exe/
with regards to your drivers problem, see FAQ 2 here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Thanks a ton!!! i hope it works!!!
Skyrocker94 said:
Thanks a ton!!! i hope it works!!!
Click to expand...
Click to collapse
fastboot oem lock
relocks the bootloader to run the RUU
if you have problems with the RUU
try this / unlocking the bootloader / flashing TWRP 2.6.3.3 and sideload this Guru Reset >> http://www.androidfilehost.com/?fid=23501681358545274
It worked. Thank you very much!
"Ask and it shall be given to you"
same issue here, no more SO and stuck in HTC log
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.27.3218.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__402
INFObattery-status: good
INFObattery-voltage: 4102mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-1f512bb6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Thanks a lot for help, sorry for my English.
vanito said:
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
Thanks a lot for help, sorry for my English.
Click to expand...
Click to collapse
another H3G__402 you need help from @Danny201281
he has the same phone
vanito said:
Hello, help me please, i've search the RUU for restore my HTC but not are sure where's the right.
Here Original "fastboot getvar all" when device was working also w/o SO.
Thanks a lot for help, sorry for my English.
Click to expand...
Click to collapse
Well I'm H3G__001 UK. H3G__402 is Italy right? Not that it makes a difference the software is all the same.
Unfortunately there is no ruu for H3G. What exactly happened with your phone it can hopefully be fixed without the need for an ruu.
Bad flash, wiped your os? Can you access bootloader or recovery?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Danny201281 said:
Well I'm H3G__001 UK. H3G__402 is Italy right? Not that it makes a difference the software is all the same.
Unfortunately there is no ruu for H3G. What exactly happened with your phone it can hopefully be fixed without the need for an ruu.
Bad flash, wiped your os? Can you access bootloader or recovery?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
this phone was w/o SO since i've buyed of 2 handle. was installed only a Custom Rom. i want make it S-OFF for installl anythingh for error from TWRP have done advanced wipe and have erase also this Rom whith all partition and BKP.
Phone enter in Recovery, hboot, fastboot and can flash RUU signed, (have tried with an BOX to flash Guru reset but Error becouse No signature), or if you have other Rom or other for fix this issue and after i want make S-OFF for change this Bad cid, if can help me please
vanito said:
this phone was w/o SO since i've buyed of 2 handle. was installed only a Custom Rom. i want make it S-OFF for installl anythingh for error from TWRP have done advanced wipe and have erase also this Rom whith all partition and BKP.
Phone enter in Recovery, hboot, fastboot and can flash RUU signed, (have tried with an BOX to flash Guru reset but Error becouse No signature), or if you have other Rom or other for fix this issue and after i want make S-OFF for change this Bad cid, if can help me please
Click to expand...
Click to collapse
Hi and sorry for the delayed reply, as I say there is no ruu for h3g, but it sounds as if you just need to push a compatible Rom to the phone, what is you current version of TWRP.
I do have some h3g stock nandroids, one for jb 4.3 and one for kk 4.4.2. I'll need to upload them for you and I can't do that until later this evening as I'm in work now. If you want to go s-off the jb 4.3 nandroid has worked for me everytime so would be worth a try. I'll upload it tonight and send you a link as soon as it's available.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
You're such a nice and friendly forum mate, @Danny201281
tetakpatalked from Nexus 7 flo
Danny201281 said:
Hi and sorry for the delayed reply, as I say there is no ruu for h3g, but it sounds as if you just need to push a compatible Rom to the phone, what is you current version of TWRP.
I do have some h3g stock nandroids, one for jb 4.3 and one for kk 4.4.2. I'll need to upload them for you and I can't do that until later this evening as I'm in work now. If you want to go s-off the jb 4.3 nandroid has worked for me everytime so would be worth a try. I'll upload it tonight and send you a link as soon as it's available.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
Not worry, important i can fix with you help this problem.
My version of TWRP installed now is "twrp-2.7.1.0a-m7" this device first of i Erase all had installed an VENOM Rom, not remember wich ViperOnes version, my Getvar All you have seen, i want listen to you becouse not understand good about these HTC w/o sd card.
If you can send to me this nandroid jb 4.3 and if please write also if i can flash how normal rom/Ruu or how do.... you help is very good for me :good:
wait for you link to download, please if cannot use Mega.co is good becouse here is blocked and impossible open this, Ciao:good:
vanito said:
Not worry, important i can fix with you help this problem.
My version of TWRP installed now is "twrp-2.7.1.0a-m7" this device first of i Erase all had installed an VENOM Rom, not remember wich ViperOnes version, my Getvar All you have seen, i want listen to you becouse not understand good about these HTC w/o sd card.
If you can send to me this nandroid jb 4.3 and if please write also if i can flash how normal rom/Ruu or how do.... you help is very good for me :good:
wait for you link to download, please if cannot use Mega.co is good becouse here is blocked and impossible open this, Ciao:good:
Click to expand...
Click to collapse
Ok sorry I was very busy last night. I am on this for you now, I'll post link as soon as it's ready but my upload seed is very poor
I created this nandroid using TWRP 2.6.3.3 but it should restore fine using other versions of TWRP.
Do you have adb working when in recovery mode? You will need it to push the nandroid to the device.
Danny201281 said:
Ok sorry I was very busy last night. I am on this for you now, I'll post link as soon as it's ready but my upload seed is very poor
I created this nandroid using TWRP 2.6.3.3 but it should restore fine using other versions of TWRP.
Do you have adb working when in recovery mode? You will need it to push the nandroid to the device.
Click to expand...
Click to collapse
Hello, can leave this version of TWRP: "twrp-2.7.1.0a-m7", that i've or you can suggest another version?
System not Mount, i've tryed to push in fastbootRUU but fail anythinghs i want push.
I've tryed putting phone in Recovery mode and i can see from "device manager" that have "adb android" or similar then if open can see "My Htc", if i put in normal mode, (is w/o Boot.img), i can see MTP that install/uninstall and phone how "Cd Unit external", (cannot open).
Not warry where upload it, important not use Mega.co becouse in Italy is Blocked, any other site is ok.
Please can send to me also Command for Push this Nandroid 4.3 in Recovery mode?, (i've also one dongle + sw but for Flash anythinghs requiere fastboot RUU mode), anyway i'm looking forward this Nandroid Bkp and how push in phone hooping that i can fix the phone
@vanito backup done with TWRP 2.6.3.3 is compatible with 2.7.1.0
He is asking you about ADB and using command line of your PC to push the files. Do you know how to do it? Do you have SDK installed on your PC?
tetakpatalked from N7100
vanito said:
Hello, can leave this version of TWRP: "twrp-2.7.1.0a-m7", that i've or you can suggest another version?
System not Mount, i've tryed to push in fastbootRUU but fail anythinghs i want push.
I've tryed putting phone in Recovery mode and i can see from "device manager" that have "adb android" or similar then if open can see "My Htc", if i put in normal mode, (is w/o Boot.img), i can see MTP that install/uninstall and phone how "Cd Unit external", (cannot open).
Not warry where upload it, important not use Mega.co becouse in Italy is Blocked, any other site is ok.
Please can send to me also Command for Push this Nandroid 4.3 in Recovery mode?, (i've also one dongle + sw but for Flash anythinghs requiere fastboot RUU mode), anyway i'm looking forward this Nandroid Bkp and how push in phone hooping that i can fix the phone
Click to expand...
Click to collapse
twrp 2.7.1.0 should work fine :good:
adb will only work in recovery mode. Put phone in recovery and connect usb. Then in the adb/fastboot command line type
Code:
adb devices
You should see an output of your phone's serial no. If you did it's working. You can test adb push with a Rom if you have one. Rename the Rom file to "rom.zip" and put it in your adb/fastboot folder. Then in the command line type
Code:
adb push rom.zip /sdcard
The push will take several minutes the command window will be unresponsive until it's done. When it's finished the push you should be able to Install the Rom using TWRP.
P.S. The stock nandroid is uploading to dropbox. This is ok for use in Italy?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
@vanito you have got a real little guide for Windows by @Danny201281
In the case that you are a Linux user, it works just slightly different: in such case check my little thread about running fastboot & ADB in Ubuntu. It is posted in the Nexus 7 section but ADB works for Samsung just the same way.
tetakpatalked from Nexus 7 flo
Danny201281 said:
twrp 2.7.1.0 should work fine :good:
adb will only work in recovery mode. Put phone in recovery and connect usb. Then in the adb/fastboot command line type
Code:
adb devices
You should see an output of your phone's serial no. If you did it's working. You can test adb push with a Rom if you have one. Rename the Rom file to "rom.zip" and put it in your adb/fastboot folder. Then in the command line type
Code:
adb push rom.zip /sdcard
The push will take several minutes the command window will be unresponsive until it's done. When it's finished the push you should be able to Install the Rom using TWRP.
P.S. The stock nandroid is uploading to dropbox. This is ok for use in Italy?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
@Danny201281, ok i have this twrp 2.7.1.0 also and can install replace the other one i've installed:good:
Yes i've installed adb&fastboot in C: (principal directory), i use Win7 32 bit and can use also win Xp in the 2 pcs i've adb&fastboot installed.:good:
Yes, i know a little about use of these adb or fastboot, specific command for this case i can copy from this you good guide:good:
I've tested pushing "guru reset..." from fastboot yesterday but have get one Error 24, not have tested pushing via Adb command, but now i see you command above and can test this.
Sorry, i not know which Rom can push and if you can advise me about wich push is big help, (if you can post only link to Rom) for me, if possible any Rom for to make S-Off after that i fix this phone.
Yes, Dropbox i can use here if you give me access for download the Nandroid Bkp 4.3.
Last question, if push of Rom goes all ok, after i open phone in recovery and find this Rom in Sd Card, right?...then from "Install>Sd Card>Rom" swipe and will be installed right?
Ok, after i install this Rom always from recovery can install you nondroid bkp 4.3, ok?, :good:
I'm ready if can send to me link for this Rom and Link of dropbox i want try to ceck anythinghs.
Hi Guys,
Bought an m7 cheap on ebay. I don't know anything about the history, except to say it's been fiddled with...
It powers up but it won't boot up; it hangs on the HTC logo.
Bootloader's unlocked, it's been rooted... S-ON
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ** edited out **
(bootloader) imei: ** edited out **
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4297mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm thinking I should try and take it back to stock, but I don't know where I should go from here and I'm worried I might screw it up.
Any help would be greatly appreciated
Thanks in advance!
Go to RUU mode and flash an RUU. There's a lot of threads explaining how to go to back to stock on this forum. If it still doesn't work, it might be an internal issue like the motherboard.
Can someone please recommend an RUU to go to... I'm just worried if I use the wrong one it will cause more issues. I thought RUUs were dependent on the CID num and as that's been changed to allow custom roms... I'd be happy taking it back to a plain old vanilla HTC / Google - just something to get it back alive.
Thanks
Should also add I can't get s-off... adb devices doesn't show anything... I'm guessing usb debugging wasn't set up
mdb said:
Can someone please recommend an RUU to go to... I'm just worried if I use the wrong one it will cause more issues. I thought RUUs were dependent on the CID num and as that's been changed to allow custom roms... I'd be happy taking it back to a plain old vanilla HTC / Google - just something to get it back alive.
Click to expand...
Click to collapse
There is no ruu we can recommend because your version-main is blank the fact that you also have superCID doesn't help identifying which ruu you'll need to use.
mdb said:
Should also add I can't get s-off... adb devices doesn't show anything... I'm guessing usb debugging wasn't set up
Click to expand...
Click to collapse
You'll have to unlock the bootloader, flash a custom recovery (twrp preferred), flash a rom and use your phone like that or, if you want, from there you will be able to achieve s-off again and convert your phone to wherever you want (Stock Sense or stock GPE) by flashing a RUU.
alray said:
There is no ruu we can recommend because your version-main is blank the fact that you also have superCID doesn't help identifying which ruu you'll need to use.
You'll have to unlock the bootloader, flash a custom recovery (twrp preferred), flash a rom and use your phone like that or, if you want, from there you will be able to achieve s-off again and convert your phone to wherever you want (Stock Sense or stock GPE) by flashing a RUU.
Click to expand...
Click to collapse
Thanks so much for this... I've been learning more all day (traditionally an iOS guy)...
Am I right in thinking I would need to sideload a custom rom through twrp and then install it? If so, I'm having an issue getting my laptop to talk to the phone - "adb devices" is pretty flakey to say the least, sometimes it works sometimes it doesn't... I've read various things about Windows 8 and that adb works best on Windows 7, can you please confirm I'm on the right track here. I'd like to put the Viper rom on it.
Thanks again
In order to flash custom recovery you need to be booted to bootloader menu, and use fastboot commands. If you flash TWRP 2.8.6.0 or later, there's no need to sideload a ROM because newer TWRP recoveries have MTP option, so you use that. Try to go to bootloader, connect your phone to your laptop or PC, and issue a command fastboot devices. If it shows your phone, you're good to go
Thanks donkeyking1...
I got it working eventually, I needed to install new drivers for Windows 8 then adb started behaving properly. I ended up pushing the Viper ROM to the phone... The phone's alive now but currently it has no IMEI, baseband or OS - they're all blank. I'm wondering if it's because I've installed Viper 9 without upgrading the firmware first? My next goals are to try and S-OFF the device so I can install a stock rom, at which point hopefully I'll get OTA updates and then go back to Viper 9 - it looks great, I just can't use it! - no phone signal!
Does that sound like the right approach? I'm trying to flash different custom roms to hopefully find one that works with rumrunner. I've read that some folks have managed to S-OFF on hboot 1.57 with rumrunner, but it's picky on the rom that's installed. It doesn't work on Viper 9...
If anyone can add any help it would be much appreciated!
Thanks in advance
mdb said:
Thanks donkeyking1...
I got it working eventually, I needed to install new drivers for Windows 8 then adb started behaving properly. I ended up pushing the Viper ROM to the phone... The phone's alive now but currently it has no IMEI, baseband or OS - they're all blank. I'm wondering if it's because I've installed Viper 9 without upgrading the firmware first? My next goals are to try and S-OFF the device so I can install a stock rom, at which point hopefully I'll get OTA updates and then go back to Viper 9 - it looks great, I just can't use it! - no phone signal!
Does that sound like the right approach? I'm trying to flash different custom roms to hopefully find one that works with rumrunner. I've read that some folks have managed to S-OFF on hboot 1.57 with rumrunner, but it's picky on the rom that's installed. It doesn't work on Viper 9...
If anyone can add any help it would be much appreciated!
Thanks in advance
Click to expand...
Click to collapse
flash the 7.19.401.2 firmware and then the 7.19.401.2 RUU. If you still have imei problem after that, its most likely an hardware defect.
relock your bootloader if not already locked or re-locked:
Code:
fastboot oem lock
Code:
fastboot orm rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastbppt flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
fastboot reboot
*** use htc_fastboot.exe for flashing the ruu (linked below). Save all files in the same folder where you already have fastboot.exe and adb.exe on your computer.
M7_UL_Firmware_7.19.401.2.zip
PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
htc_fastboot.exe
Alray, just curious (still learning ), how do you know from the info I've given you that the firmware / RUU you've suggested is one to fix the issues - I've struggled to understand this the past few days - thanks!
mdb said:
Alray, just curious (still learning ), how do you know from the info I've given you that the firmware / RUU you've suggested is one to fix the issues - I've struggled to understand this the past few days - thanks!
Click to expand...
Click to collapse
To flash a ruu on a s-on phone there are many prerequisites:
The RUU must match your MID: 7.19.401.2 is for PN0710000
The RUU must match your CID: You have superCID so its not a problem.
The RUU must be the same version or an upgrade from your actual version, we don't know your actual version because of your blank versio-main but you have 1.57 hboot which suggest a 6.xx.xxx.x version. So 7.19.401.2 should be an upgrade.
The bootloader must be locked or re-locked.
There is no risk trying it, the worst that can happen is that the phone won't accept the ruu and nothing will be flashed.
mdb said:
Alray, just curious (still learning ), how do you know from the info I've given you that the firmware / RUU you've suggested is one to fix the issues - I've struggled to understand this the past few days - thanks!
Click to expand...
Click to collapse
Super CID + your MID. WWE firmware should work just fine. Right @alray?
donkeykong1 said:
Super CID + your MID. WWE firmware should work just fine. Right @alray?
Click to expand...
Click to collapse
:good:
Well, thanks so much for your help guys, but alas it seems the phone is k-put... Flashed the firmware and the rom no problem.... but it still shows no IMEI / IMEI SV / IMSI and it can't recognise the phone number - I'm guessing it can't read the sim. It does show the OS and IMEI in the bootloader, but once booted it's a no go.
mdb said:
Well, thanks so much for your help guys, but alas it seems the phone is k-put... Flashed the firmware and the rom no problem.... but it still shows no IMEI / IMEI SV / IMSI and it can't recognise the phone number - I'm guessing it can't read the sim. It does show the OS and IMEI in the bootloader, but once booted it's a no go.
Click to expand...
Click to collapse
Try to bend your sim tray just a little bit. Maybe your sim card is not reaching the contacts inside the phone. Or put a piece of paper under the sim and see what happens
Thanks donkeykong1, I've tried but it's not working... The fact the IMEI / IMEI SV and baseband are unknown though... they're not sim related...
It does show the baseband and IMEI in fastboot getvar all though?...
There were a lot of people with that same issue, and their phones worked fine, so I doubt it has anything to do with your sim. Your sim works in another phone?
Yeah, the sim's fine. @alray said it's likely a hardware issue if the firmware / rom didn't repair the IMEI issue, and the other threads I've looked at with the same issue are all saying the motherboard's faulty.
Although I am baffled as to why it is showing the IMEI / baseband in the bootloader, in fastboot etc. but not once the phone has booted up?...
I read on another thread (http://forum.xda-developers.com/showthread.php?t=2253514) that maybe flashing a kernal and/or radio might solve it?
Just wondering whether I should try flashing an official HTC rom? I've been in touch with the guy I got it off and he said it was originally on Orange, UK:
http://www.htcdev.com/devcenter/downloads > One M7 / v5.0.2 > Find Files : Page 6
One M7 / Orange / UK / CRC / 3.4.10 / v5.0.2 / 539.0 MB / 7.19.61.10
Was also thinking of...
http://www.htcdev.com/devcenter/downloads > One M7 / v5.0.2 > Find Files : Page 1
One M7 / HTC / EU / MR 3 / 3.4.10 / v5.0.2 / 486.0 MB / 7.19.401.22
If I did that would I need to update the firmware first like you advised originally @alray?
If I know I can revive the IMEI etc. I'll be happy to go ahead and pay to S-OFF
Thanks in advance
You need a kernel to match your firmware. If you're on 7.19.401.2, then you need 7.19.401.2 kernel. I can give you boot.img, but I don't have the whole zip, with modules. Then again, if your phone boots fine, maybe boot.img will help. I'd [email protected] to confirm my thoughts though. He's much more into this than I am
was trying to root my one for the first time. I followed someone's tutorial online, and everything was perfect at first, until I got into using TWRP for recovery. I used version 2.5. After I got into it, the touch screen is not working. I stuck in the lock screen now, not able to unlock, not able to restart, not even able to power off. After some digging, I found out that probably I should have used the version 2.6 instead in the first place. Now my question is, do I need to wait until the power drains out before I could do anything else, or if there is anything I could do to restart the phone and do this recovery process again with TWRP v2.6? Thanks.
Click to expand...
Click to collapse
have exactly the same problem.
But I can't hard reset the HTC ONE via volume down + power button...
Can't access the phone via USB attached cable and the common tools... :///
Do I have to wait till the battery is empty or is there a further solution?
vin4ester15 said:
have exactly the same problem.
But I can't hard reset the HTC ONE via volume down + power button...
Can't access the phone via USB attached cable and the common tools... :///
Do I have to wait till the battery is empty or is there a further solution?
Click to expand...
Click to collapse
Try the reset with device under a bright light.
What device do you have and what twrp did you flash.
mb_guy said:
Try the reset with device under a bright light.
What device do you have and what twrp did you flash.
Click to expand...
Click to collapse
Looks like its 2.5.0.0 from the picture
mb_guy said:
Try the reset with device under a bright light.
What device do you have and what twrp did you flash.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=rRkAHw_GmIs&list=FLp-bV1_Di0EtsQXswt1FQuQ&index=2
vin4ester15 said:
https://www.youtube.com/watch?v=rRkAHw_GmIs&list=FLp-bV1_Di0EtsQXswt1FQuQ&index=2
Click to expand...
Click to collapse
? what does that tell me about your actual device, carrier, model etc.
mb_guy said:
? what does that tell me about your actual device, carrier, model etc.
Click to expand...
Click to collapse
look 2:05 https://www.youtube.com/watch?v=6fjBcnEJYbI
Ohhh, i reboot it with brith light. But now how to install a normal TWRP? Phone is unlocked. S-off
vin4ester15 said:
Ohhh, i reboot it with brith light. But now how to install a normal TWRP? Phone is unlocked. S-off
Click to expand...
Click to collapse
Why not giving us your phone info here instead of playing this "look at this youtube video" game? If you want help, please answer the questions asked above, better to post a complete "fastboot getvar all" output (excluding your IMEI/MEID/Serialno) so we know everything about your phone an can help you better.
If you have a sprint HTC one, then flash a sprint twrp recovery. You can find the file on the twrp website.
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
vin4ester15 said:
Ohhh, i reboot it with brith light. But now how to install a normal TWRP? Phone is unlocked. S-off
Click to expand...
Click to collapse
Sorry, but I'm going to let @alray help with this one. Looks like you have 5.05.651.2 rom installed. Is this a sprint device or some other m7_wls device? I have no experience with these, and see many posts with folks flashing wrong recovery or rom and bricking devices.
mb_guy said:
Sorry, but I'm going to let @alray help with this one. Looks like you have 5.05.651.2 rom installed. Is this a sprint device or some other m7_wls device? I have no experience with these, and see many posts with folks flashing wrong recovery or rom and bricking devices.
Click to expand...
Click to collapse
What of them I can install? http://www.htc.com/us/support/rom-downloads.html#unlocked
My phone is unlocked, i can use Any SIM card
vin4ester15 said:
What of them I can install? http://www.htc.com/us/support/rom-downloads.html#unlocked
My phone is unlocked, i can use Any SIM card
Click to expand...
Click to collapse
I don't think you can install any ruu, yet. I also noticed from your video that your device is s-off (security off) no problem, but also supercid (11111111), this is a problem. I don't think a ruu will flash until the cid is reverted to what ever it was initially from the installed ruu carrier. Sprint cid is SPCS_001 for example. I think you will have to rewrite this from adb, but getting out of my knowledge zone here, sorry.
mb_guy said:
I don't think you can install any ruu, yet. I also noticed from your video that your device is s-off (security off) no problem, but also supercid (11111111), this is a problem. I don't think a ruu will flash until the cid is reverted to what ever it was initially from the installed ruu carrier. Sprint cid is SPCS_001 for example. I think you will have to rewrite this from adb, but getting out of my knowledge zone here, sorry.
Click to expand...
Click to collapse
You can flash a RUU with supercid, no problem. But since his phone is a sprint variant, having supercid is somewhat useless since he can only flash RUU for sprint (SPCS_001). Having supercid on a sprint M7 won't hurt but its pretty useless imo... (unlike having supercid on a M7_U/M7_UL which will allow you to flash any RUU you want)
alray said:
You can flash a RUU with supercid, no problem. But since his phone is a sprint variant, having supercid is somewhat useless since he can only flash RUU for sprint (SPCS_001). Having supercid on a sprint M7 won't hurt but its pretty useless imo... (unlike having supercid on a M7_U/M7_UL which will allow you to flash any RUU you want)
Click to expand...
Click to collapse
ohh, i'm a really noob, i install this RUU_M7_WL_JB43_SENSE50_SPCS_MR_Sprint_WWE_3.05.651.6_Radio_1.00.20.1108_NV_SPCS_4.38_003_release_348053_signed_2 Now, i don't have GSM\3g and sim is lock :crying: how to fix?
vin4ester15 said:
ohh, i'm a really noob, i install this RUU_M7_WL_JB43_SENSE50_SPCS_MR_Sprint_WWE_3.05.651.6_Radio_1.00.20.1108_NV_SPCS_4.38_003_release_348053_signed_2 Now, i don't have GSM\3g and sim is lock :crying: how to fix?
Click to expand...
Click to collapse
Sprint M7 is a CDMA phone and will only work on the Sprint network (it can connect to other gsm networks for roaming but you won't get full connectivity), its not the result of the RUU. And btw a RUU can't sim lock a phone, its not possible. The ruu doesn't write anything to the partition where the sim lock info are stored.
can't help any further if you don't post the output of "fastboot getvar all" like asked previously. I don't have time right now to watch some youtube video to figure out what device you have etc.
alray said:
Sprint M7 is a CDMA phone and will only work on the Sprint network (it can connect to other gsm networks for roaming but you won't get full connectivity), its not the result of the RUU. And btw a RUU can't sim lock a phone, its not possible. The ruu doesn't write anything to the partition where the sim lock info are stored.
can't help any further if you don't post the output of "fastboot getvar all" like asked previously. I don't have time right now to watch some youtube video to figure out what device you have etc.
Click to expand...
Click to collapse
C:\Users\Vitalie01\Desktop\OneDrivers_Fastboot\OneDrivers_Fastboot\Fastboot>fast
boot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.16.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA36BS907523
(bootloader) imei: 355859056246580
(bootloader) meid: 99000146869492
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3976mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Before that, it worked. The phone was like out of the store without being tied to an operator. Due to the fact that I could not be updated to Android 5.0, I downloaded the firmware from the official site and set it. With the new firmware the connection was lost. Now I can not use 3G. From the beginning, radio was 1.00 and android 4.4.2. The other parameters are listed in the video at minute 2:05
I tried to install a new version via exe files and zip through. Even I tried to put ViperOne, but once it is installed, an error, TWRP and firmware is deleted. I again through fastboot TWRP load and backup. Otherwise, when you turn on it immediately goes into fastboot, and so on. Something is missing this phone for the proper installation of new versions of android.
So ive been helping out as much as i can in the Q&A threads,but alot of the resources that are usually needed are scattered around in links,so ive decided to post the latest RUUs per carrier i could find.
For some unapparent reason,the ROM downloads page on the htc website is still outdated with LP RUU links,whereas most of the usual carriers have MM available.
Sprint MM:
http://www.htc.com/us/support/htc-desire-626s-sprint/news/
Boost Mobile MM:
http://www.htc.com/us/support/htc-desire-626s-boost/news/
MetroPCS MM:
http://www.htc.com/us/support/htc-desire-626s-metro-pcs/news/
T-Mobile US MM:
http://www.htc.com/us/support/htc-desire-626s-t-mobile/news/
Virgin Mobile MM:
http://www.htc.com/us/support/htc-desire-626s-virgin-mobile/news/
At the bottom of each respective page,theres a download link for the full RUU thats specific to your device.
If anyone has any other RUUs/Carriers theyd like added please let me know.
Keep in mind,in order to run these RUUs,your Bootloader MUST be locked/Relocked via fastboot.
After the RUU,you can reunlock your bootloader using the htcdev process again.if you saved your unlocktoken great,if not just request another.
The command to relock your bootloader is "fastboot oem lock" without quotes.
awesome thank you so much, very clear, re-locked BL and RUU
Hi @GotHeart,
Can you please upload Verizon 626 RUU. Thank you.
minhajlk said:
Hi @GotHeart,
Can you please upload Verizon 626 RUU. Thank you.
Click to expand...
Click to collapse
Here is the HTC ruu download link: http://www.htc.com/us/support/rom-downloads.html
But it says that RUUs aren't available for Verizon, try using HTC sync manager.
IsaacGuti said:
Here is the HTC ruu download link: http://www.htc.com/us/support/rom-downloads.html
But it says that RUUs aren't available for Verizon, try using HTC sync manager.
Click to expand...
Click to collapse
Hi,
Thanks for your reply, Verizon is not listed in HTC link, my phone is softbricked, since its s-off I can easily recover with a RUU. I am not sure if it is possible to recover with syncmanager since the phone is in softbricked state.
minhajlk said:
Hi,
Thanks for your reply, Verizon is not listed in HTC link, my phone is softbricked, since its s-off I can easily recover with a RUU. I am not sure if it is possible to recover with syncmanager since the phone is in softbricked state.
Click to expand...
Click to collapse
I looked as well,and could not find an RUU for the verizon model.try using htc sync manager while in download/bootloader mode maybe?
i have updated my htc desire 626 virgin mobile to marshmellow 6.0.1 now i cant root it can i downgrade back to 5.1.1
Thank you GotHeart for opening this topic!
I've looked and looked but I can not find a RUU.exe for this model... ( one SIM card ), It came from uk! Any suggestion?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CC5CKYM04174
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a32_ul
(bootloader) platform: hTCBmsm8916
(bootloader) modelid: 0PKX20000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0b9a12e3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 1001
Im not entirely sure to be honest,i did some searching and came up empty as well.what carrier are/were you using?
GotHeart said:
Im not entirely sure to be honest,i did some searching and came up empty as well.what carrier are/were you using?
Click to expand...
Click to collapse
This phone is unlocked to the network.
I think that I have to wait, otherwise I will not be able to recover the operating system ...
b8engl said:
This phone is unlocked to the network.
I think that I have to wait, otherwise I will not be able to recover the operating system ...
Click to expand...
Click to collapse
If theres no RUU available for your carrier,youre better off not messing with anything.if the changes you make end you in a bootloop or something,they may not be fixable dependent upon when an RUU is available.
GotHeart said:
If theres no RUU available for your carrier,youre better off not messing with anything.if the changes you make end you in a bootloop or something,they may not be fixable dependent upon when an RUU is available.
Click to expand...
Click to collapse
That's the problem! I broke the phone when I flash a "supposed" TWRP.img for the HTC Desire 626. Now I just have access to bootloader and the original recovery.
b8engl said:
That's the problem! I broke the phone when I flash a "supposed" TWRP.img for the HTC Desire 626. Now I just have access to bootloader and the original recovery.
Click to expand...
Click to collapse
You do have the original recovery? Try flashing it under fastboot.what format is it in?and does the TWRP you flashed work?
GotHeart said:
You do have the original recovery? Try flashing it under fastboot.what format is it in?and does the TWRP you flashed work?
Click to expand...
Click to collapse
It was hard to find the original recovery... and yes, I flash thru fastboot mode.
When i flash the TWRP.img, after reboot to recovery i get a black screen. I think this is the 32-bit version.
My options are: Flash a custom recover and then a custom ROM. Or execute a RUU.exe that match my phone.
What do you think GotHeart?
b8engl said:
It was hard to find the original recovery... and yes, I flash thru fastboot mode.
When i flash the TWRP.img, after reboot to recovery i get a black screen. I think this is the 32-bit version.
My options are: Flash a custom recover and then a custom ROM. Or execute a RUU.exe that match my phone.
What do you think GotHeart?
Click to expand...
Click to collapse
Dont flash the TWRP in fastboot,flash the original recovery. "fastboot flash recovery YOURFILENAME.img" where yourfilename is the name of the original recovery.if the file is just named recovery, add the .img at the end.
GotHeart said:
Dont flash the TWRP in fastboot,flash the original recovery. "fastboot flash recovery YOURFILENAME.img" where yourfilename is the name of the original recovery.if the file is just named recovery, add the .img at the end.
Click to expand...
Click to collapse
I already flash the original recovery.img GotHeart, but the phone doesn't go past htc logo. I think the term for this is "soft-brick"
b8engl said:
I already flash the original recovery.img GotHeart, but the phone doesn't go past htc logo. I think the term for this is "soft-brick"
Click to expand...
Click to collapse
Sorry,i should have been more specific,what is the original carrier?i know you said its unlocked,but who originally sold the phone?
GotHeart said:
Sorry,i should have been more specific,what is the original carrier?i know you said its unlocked,but who originally sold the phone?
Click to expand...
Click to collapse
Don't worry! I have fault here, because i didn't explain myself.
Well... I bought this phone on ebay, is a unlocked version. The information that i have is:
Box:
HTC Desire 626 (OPKX200-BL)
Octa-Core 1.7 Cortex-A53, 1GB Ram, 16 HDD
Phone:
(bootloader) product: a32_ul
modelid: 0PKX20000
But... when the phone was ok I installed cpuz.apk and saw the qualcomm chip, and it was a quad-core. To be more i upgrade to marshmallow version using OTA update provided by the phone.
In gsmarena dot com i try to distinguish my phone but i cant.
I bought the unlocked 626 direct from HTC unfortunately I never unlocked the bootloader and recently it got stuck in a boot loop after an OTA update. I believe the firmware is the same as the ATT version however since its using a different cid (BS_US001) I am unable to load the firmware. Any chance anyone has the RRU for this?
Nice