[Q] Battery drain problem in cm 11 build m10 - Captivate Q&A, Help & Troubleshooting

After i recently updated to cm 11 SNAPSHOT M10,my battery was draining very fast and cpu only ran at max frequency mostly , even when not using ,but this drain was not seen when not connected to wifi.Is it the roms fault or somethingelse?? PLs help

M7 to M10 was an improvement for me
Tripler12 said:
After i recently updated to cm 11 SNAPSHOT M10,my battery was draining very fast and cpu only ran at max frequency mostly , even when not using ,but this drain was not seen when not connected to wifi.Is it the roms fault or somethingelse?? PLs help
Click to expand...
Click to collapse
When I upgraded from 10.2 to 11/M7, the battery drain was terrible. But after going from M7 to M10, it is MUCH better.

ssurell said:
When I upgraded from 10.2 to 11/M7, the battery drain was terrible. But after going from M7 to M10, it is MUCH better.
Click to expand...
Click to collapse
But i am losing 1percent each with 1min 45sec of use

Tripler12 said:
But i am losing 1percent each with 1min 45sec of use
Click to expand...
Click to collapse
Have you tried going to cm10 instead? The guy above said that cm11 drained his battery as well.

BWolf56 said:
Have you tried going to cm10 instead? The guy above said that cm11 drained his battery as well.
Click to expand...
Click to collapse
But that makes the device quite slow and some apps like facebook dont work

Tripler12 said:
But that makes the device quite slow and some apps like facebook dont work
Click to expand...
Click to collapse
From a clean flash?
Also, did you try using different kernel settings and/or another kernel?

BWolf56 said:
From a clean flash?
Also, did you try using different kernel settings and/or another kernel?
Click to expand...
Click to collapse
which kernal do you suggest for my i897

Tripler12 said:
which kernal do you suggest for my i897
Click to expand...
Click to collapse
I haven't kept up with the cappy's dev but NeatKernel seems popular. Check its features and see if it fits your needs (that goes for ROM as well).

Maybe flashing twice does the trick
Tripler12 said:
But that makes the device quite slow and some apps like facebook dont work
Click to expand...
Click to collapse
No I didn't care for cm10. If I didn't see any improvement with the latest milestone I was going to go back to the gingerbread kernel and cm7. I would expect there to be more battery consumption with KitKat then gingerbread due to the mere work load on the processor. But its running more conservative than my dual core phone with ICS ever did even with this amoled screen.
The second flash of cm11 fixed my issues. From CWM recovery I first wiped the cash, installed the cm11 zip file on the SD, then wiped dalvik cache. After up and running I did remove some Google Apps that suck battery and bandwidth like Chrome and Google Play sound recorder (which seems to be running all the time searching for music or something).

Related

[Q] Deep Sleep with Bluetooth not working

Hello Community!
I've got a problem with my Galaxy Ace. I've installed the latest CM7 nightly (2012-10-14) and installed CronMod INT2EXT+ script.
In addition i've installed the newest Firekernel (2012-10-09) OC, official.
I've encountered a problem while using Bluetooth. With enabled Bluetooth the phone won't go into Deep Sleep mode. Is it a Kernel problem, or has it something to do with CM7?
Hoping to find a solution for my problem.
Cheers
Alex
Hello
I have the same problem
Did you find a solution ?
Maybe it's normal behaviour ?
acca said:
Hello
I have the same problem
Did you find a solution ?
Maybe it's normal behaviour ?
Click to expand...
Click to collapse
Nope, no solution till now... I think i will try it with the stock kernel of CM7... Maybe it's because of the Firekernel...
Hubrrr said:
Nope, no solution till now... I think i will try it with the stock kernel of CM7... Maybe it's because of the Firekernel...
Click to expand...
Click to collapse
I installed stocklite v7.1 and no deep sleep problem.
I'll try to find from were comes the problem in the following days.
I'll update you
Stock CM Kernel
I've just tried the stock CM7 Kernel, but also no Deep Sleep while Bluetooth is enabled.
The rom with wich i encoutered this problem is based on cm7.
Maybe we are not alone in this case but nobody else care about it.
acca said:
The rom with wich i encoutered this problem is based on cm7.
Maybe we are not alone in this case but nobody else care about it.
Click to expand...
Click to collapse
Jep, i think so too.. I am not allowed (min. 10 posts) to post in the DEV section till now...
I've bought a SmartWatch, but without Bluetooth connection it's not that smart but i dont want to charge my Phone every day... And also Stock for the Ace is not really an option for me... I prefer CM7...
Hubrrr said:
Jep, i think so too.. I am not allowed (min. 10 posts) to post in the DEV section till now...
I've bought a SmartWatch, but without Bluetooth connection it's not that smart but i dont want to charge my Phone every day... And also Stock for the Ace is not really an option for me... I prefer CM7...
Click to expand...
Click to collapse
You should try Stocklite 7.1
http://forum.xda-developers.com/showthread.php?t=1703094
It has a very good battery life
I added int2ext+ to extend internal memory to sdcard
adrenaline engine to speed up the phone
firekernel
and ICS MOD http://forum.xda-developers.com/showthread.php?t=1926596
now my rom is pretty close to CM7
acca said:
You should try Stocklite 7.1
http://forum.xda-developers.com/showthread.php?t=1703094
It has a very good battery life
I added int2ext+ to extend internal memory to sdcard
adrenaline engine to speed up the phone
firekernel
and ICS MOD http://forum.xda-developers.com/showthread.php?t=1926596
now my rom is pretty close to CM7
Click to expand...
Click to collapse
Okay, seems to be a nice combination of mods...
But Firekernel with a Stock ROM? Is everything working properly then (WiFi, Bluetooth)?
Hubrrr said:
Okay, seems to be a nice combination of mods...
But Firekernel with a Stock ROM? Is everything working properly then (WiFi, Bluetooth)?
Click to expand...
Click to collapse
Like a charm
I tried many roms, for me its the best in terms of battery life/reactivity (i don't play games).
I had strange behaviour after installing one of those mods (on don't remember wich one) but after a restart everithing is ok.
In this configuration mi battery is at 60% after a day of work (about 12 hours), my average use is half an hour of call, bluetooth always on and connected during one hour, wifi and 3g always on.
I use Juice defender but never compared with and without
Nice, but when i tried the ROM yesterday i was not able to see my SmartWatch...
Neither with the ROMs Kernel, nor with the Firekernel... I tried only the ROM without any modification but also the same result!
I was able to connect to my Notebook and to other Phones but i was not able to see my Smartwatch.
Very strange behavior and i don't know why... My Notebook and other Phones could connect to the Watch... Now i switched back to CM7 and it's working again...
Hubrrr said:
Nice, but when i tried the ROM yesterday i was not able to see my SmartWatch...
Neither with the ROMs Kernel, nor with the Firekernel... I tried only the ROM without any modification but also the same result!
I was able to connect to my Notebook and to other Phones but i was not able to see my Smartwatch.
Very strange behavior and i don't know why... My Notebook and other Phones could connect to the Watch... Now i switched back to CM7 and it's working again...
Click to expand...
Click to collapse
Sorry but i don't know why !
please tell me if you find the solution to deep sleep with CM7
acca said:
Sorry but i don't know why !
please tell me if you find the solution to deep sleep with CM7
Click to expand...
Click to collapse
Did you try this : http://forum.xda-developers.com/showthread.php?t=1817424 ?
It didn't work for me
Regards
acca said:
Did you try this : http://forum.xda-developers.com/showthread.php?t=1817424 ?
It didn't work for me
Regards
Click to expand...
Click to collapse
Yes, I tried it but it's not working for me either... Damn Deep Sleep problem...

[Q] Jelly Bean 4.1.2 hangs a lot!

Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Одг: [Q] Jelly Bean 4.1.2 hangs a lot!
camtista said:
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Click to expand...
Click to collapse
Use latest xxlq4 version, and some of custom kernel. I do not have lag at all with it.
Sent from Galaxy S Advance
Mine hangs a lot tok when i open the YouTube app in the first video, i must be tapping the first 10 seconds the screen to respond and if i have luck it doesn't hangs, and if it does, for me there is no other way out than a hard reset...
Sent from my GT-I9070 using xda app-developers app
even my phone used to lag a lot.
just root ur phone, use a custom kernel like cocre or thunderzap.
i use cocore 3.3 and in no frills, set governor to pegasusq and i/o to sio.
it will work smoothly. i play gta vice city just fine
---------- Post added at 10:48 AM ---------- Previous post was at 10:44 AM ----------
camtista said:
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Click to expand...
Click to collapse
i am using stock rom XXLQ4 with cocore 3.3 kernel and no frills config: governor-pegasusq and i/o-sio
still if u feel the phone lags which i dont think it will, u can enable forced gpu rendering in developer options, although u may experience screen flickering.
try Thunderzap 4.1 kernel and wipe cache/dalvik. See if there's any difference. It worked for me.
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
mjz2cool said:
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
Click to expand...
Click to collapse
It has been a long time since we have custom kernels and roms. Use CoCore E kernel and some custom ROM. Or some CM ROM.
shut_down said:
It has been a long time since we have custom kernels and roms. Use CoCore E kernel and some custom ROM. Or some CM ROM.
Click to expand...
Click to collapse
i'm using cocore 8.8, and deodexed stock lqe, and i added some mods like ink effect, aosp lockscreen toggle and crt-off
mjz2cool said:
i'm using cocore 8.8, and deodexed stock lqe, and i added some mods like ink effect, aosp lockscreen toggle and crt-off
Click to expand...
Click to collapse
Debloat, remove apps from system that is not of use. Like that Samsung Chat etc...
http://forum.xda-developers.com/showthread.php?t=2200954
shut_down said:
Debloat, remove apps from system that is not of use. Like that Samsung Chat etc...
http://forum.xda-developers.com/showthread.php?t=2200954
Click to expand...
Click to collapse
already done, when i deodexed it i made a flashable zip that removes all files from /preload/symlink/system/app, /system/app and /system/framework, and then copies all the deodexed files to these locations, and roots it and adds dsp manager.
mjz2cool said:
already done, when i deodexed it i made a flashable zip that removes all files from /preload/symlink/system/app, /system/app and /system/framework, and then copies all the deodexed files to these locations, and roots it and adds dsp manager.
Click to expand...
Click to collapse
If that hangs to you, try CM10.1 with PegasusQ/SIO gevernor/scheduler.
shut_down said:
If that hangs to you, try CM10.1 with PegasusQ/SIO gevernor/scheduler.
Click to expand...
Click to collapse
does cm 10.1 have a better battery life than cm 10.2? cause in cm 10.2 it was quite terrible, only about half a day with wifi off (i never use data connection, always turn that of ) and in standby most of the time.
edit- the battery is fine, it's almost new, and in stock rom i can get about 1 and-a-half day with wifi almost constantly on
mjz2cool said:
does cm 10.1 have a better battery life than cm 10.2? cause in cm 10.2 it was quite terrible, only about half a day with wifi off (i never use data connection, always turn that of ) and in standby most of the time.
Click to expand...
Click to collapse
Yeeees. I think similar to stock. I am on CM10.2 based ROM now, and CM10.1 was better for me.
shut_down said:
Yeeees. I think similar to stock. I am on CM10.2 based ROM now, and CM10.1 was better for me.
Click to expand...
Click to collapse
i think i'm gonna try that one for a day or so, see if the battery life is indeed better than cm 10.2.
only downside other than that is the high vibration strength, is there anyway to lower that? (only for buttons and certain onscreen things)
and is there much difference in battery life between 10.2 and 10.1?
edit- just installed it, but wifi always takes about 2 minutes to turn on, so i'm back to stock based
mjz2cool said:
i think i'm gonna try that one for a day or so, see if the battery life is indeed better than cm 10.2.
only downside other than that is the high vibration strength, is there anyway to lower that? (only for buttons and certain onscreen things)
and is there much difference in battery life between 10.2 and 10.1?
edit- just installed it, but wifi always takes about 2 minutes to turn on, so i'm back to stock based
Click to expand...
Click to collapse
I did not have that problem on 10.1. Did you use 1117 version? Use 1117+phone.apk from newest one.
shut_down said:
I did not have that problem on 10.1. Did you use 1117 version? Use 1117+phone.apk from newest one.
Click to expand...
Click to collapse
where can i find 1117? the only one i can find is 1116 (except for the 0xxx ones in the archive)
mjz2cool said:
where can i find 1117? the only one i can find is 1116 (except for the 0xxx ones in the archive)
Click to expand...
Click to collapse
http://d-h.st/168
R_a_z_v_a_n said:
http://d-h.st/168
Click to expand...
Click to collapse
so that one hasn't got the wifi problem? that would be great thanks for the link
and if so, is it also fixed in 10.2? that would be even better
edit- still the same problem, most of the time it takes around 2 minutes to turn on wifi, and sometimes it doesn't even turn on and i have to reboot.
JB 4.1.2
mjz2cool said:
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
Click to expand...
Click to collapse
If you haven't done yet, root your phone. Then flash a custom recovery. CWM or TWRP. Then flash a custom kernel or a custom rom.
I think the Jelly Bean stock-rom isn't recommended for this phone. It didn't use to lag, when I used Gingerbread 2.3. After flashing Jelly Bean it hanged a lot!
Now, i rooted it, installed CWM and the custom rom Pure Vanilla. It doesnt lag anymore!
Greetings and nice luck
camtista said:
If you haven't done yet, root your phone. Then flash a custom recovery. CWM or TWRP. Then flash a custom kernel or a custom rom.
I think the Jelly Bean stock-rom isn't recommended for this phone. It didn't use to lag, when I used Gingerbread 2.3. After flashing Jelly Bean it hanged a lot!
Now, i rooted it, installed CWM and the custom rom Pure Vanilla. It doesnt lag anymore!
Greetings and nice luck
Click to expand...
Click to collapse
it always froze even when using a custom kernel, but now i'm using cm11 it's not freezing anymore

[Q] I need a stable AOSP room with good battery life, can you help?

THIS IS URGENT
I'm in dire need of help, this is for my gf's phone,
It all started when she was suffering with lack of space on her phone, so I tought well, AOSP roms occupy less space so I went and installed a Maclaw's rom, the one with CM10.2, she says it phone have a battery life of 1 to 3 hours with this rom, so I tried a CM11 rom and she now has a decent battery life but with constant reboots.
The thing is she is going on a 20 day trip tomorrow with her family and I wanna give her something stable with a good battery life, I dont care if its AOSP or stock based actually, I just want something stable until she gets back and I can deal with that situation. If its an AOSP based better, but I need a stable one with a good batery life, something that wont leave her hanging by a thread when she is on the road, please help!
Soy_Filipo said:
THIS IS URGENT
I'm in dire need of help, this is for my gf's phone,
It all started when she was suffering with lack of space on her phone, so I tought well, AOSP roms occupy less space so I went and installed a Maclaw's rom, the one with CM10.2, she says it phone have a battery life of 1 to 3 hours with this rom, so I tried a CM11 rom and she now has a decent battery life but with constant reboots.
The thing is she is going on a 20 day trip tomorrow with her family and I wanna give her something stable with a good battery life, I dont care if its AOSP or stock based actually, I just want something stable until she gets back and I can deal with that situation. If its an AOSP based better, but I need a stable one with a good batery life, something that wont leave her hanging by a thread when she is on the road, please help!
Click to expand...
Click to collapse
did you turn off some setting?like location?google location setting? and try slimrom from maclaw,i have use that rom and it stable and battery life so good
masjack said:
did you turn off some setting?like location?google location setting? and try slimrom from maclaw,i have use that rom and it stable and battery life so good
Click to expand...
Click to collapse
What are you using right now? Are you still using it?
Soy_Filipo said:
What are you using right now? Are you still using it?
Click to expand...
Click to collapse
yep im still using slim rom,never had random reboot,battery life good almost 8-10 hours without charging with 3G signal,play some game,using some media social and other XD.
Soy_Filipo said:
What are you using right now? Are you still using it?
Click to expand...
Click to collapse
Ok I'm going to use that one, latest one right? It has no bugs? I've read that one has some weird screen glitches
Sent from my Galaxy Nexus using xda app-developers app
Soy_Filipo said:
Ok I'm going to use that one, latest one right? It has no bugs? I've read that one has some weird screen glitches
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
idk i dont feel that glitch just a normal rom XD.
CM 10.2 and CM 11 are working flawlessly and completely bug-free. You shouldn't get any reboots nor a poor battery life. I'm getting about 12-14 hours of intense use with kitkat.
Slimrom is not so optimized as cm 11, which is actually the last and more up-to-date rom that maclaw realeased. Try again. Are you following all the steps? Try a clean install, format system, data, cache, and dalvik-cache. Or you could just simply flash odin. Tell us how it went later
agusaon said:
CM 10.2 and CM 11 are working flawlessly and completely bug-free. You shouldn't get any reboots nor a poor battery life. I'm getting about 12-14 hours of intense use with kitkat.
Slimrom is not so optimized as cm 11, which is actually the last and more up-to-date rom that maclaw realeased. Try again. Are you following all the steps? Try a clean install, format system, data, cache, and dalvik-cache. Or you could just simply flash odin. Tell us how it went later
Click to expand...
Click to collapse
Thanks, I will try the latest cm11 then, I'm gonna format everything again

Any stable ROM?

I am currently running ancient cm10.1 20130604 nightly for last several months. I tried to upgrade a few times to 4.3 but had stability issues and went back to this ROM, which is more stable than others though power loss in sleep is still a concern along with BT.
Any recommendation on a more stable ROM? The Kitkat build looks juicy but my kid uses this tablet mainly and he gets upset if the battery dies too quickly or the system crashes
Thanks for any comments.
By the way, any way to see the partition sizes? I think I increased the system partition to 512MB before installing 4.3 but don't remember now.
Found Partition in Play store. Worked like a charm. I only have 393MB in /system and /data 3527MB. I guess going back to 10.1 restored the partition table as well.
I'd say just grab the latest version of 10.1 (2014-01-13). There's not too much of an advantage for 10.2 or 11. The cm11 3.0 kernel version is also close, but things like mic and camera are still broken.
scy1192 said:
I'd say just grab the latest version of 10.1 (2014-01-13). There's not too much of an advantage for 10.2 or 11. The cm11 3.0 kernel version is also close, but things like mic and camera are still broken.
Click to expand...
Click to collapse
Is bluetooth suppost to be working in that version? I can't seem to get it to turn on...
Update from CM9
Hi @scy1192,
I'm using CM 9 should i format to update to CM10.1 or just a flash?
Does the battery lasts long compared to CM 9?
Prasanna_bng said:
Hi @scy1192,
I'm using CM 9 should i format to update to CM10.1 or just a flash?
Does the battery lasts long compared to CM 9?
Click to expand...
Click to collapse
I'd say flash it and if you have any problems, do a factory reset. No use getting rid of all your data if it's not harming anything, but then again there might be some odd thing that breaks when upgrading.
As for battery, I personally found it better on CM10.1 than CM9.
Thanks
scy1192 said:
I'd say flash it and if you have any problems, do a factory reset. No use getting rid of all your data if it's not harming anything, but then again there might be some odd thing that breaks when upgrading.
As for battery, I personally found it better on CM10.1 than CM9.
Click to expand...
Click to collapse
Thanks scy1192. I'll try it tonight.
I'm using cm11 by milaq. Its very stable and I use it as my work tablet
Sent from my TouchPad using xda app-developers app
How do you think 10.1's battery life? The wifi can wake up by itself after sleep? (it cannot in CM9)
frostysnowman said:
I'm using cm11 by milaq. Its very stable and I use it as my work tablet
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Using Flintmans nondata cm11, runs fine but BT support isn't complete yet, keyboards work though
rexian said:
I am currently running ancient cm10.1 20130604 nightly for last several months. I tried to upgrade a few times to 4.3 but had stability issues and went back to this ROM, which is more stable than others though power loss in sleep is still a concern along with BT.
Any recommendation on a more stable ROM? The Kitkat build looks juicy but my kid uses this tablet mainly and he gets upset if the battery dies too quickly or the system crashes
Thanks for any comments.
By the way, any way to see the partition sizes? I think I increased the system partition to 512MB before installing 4.3 but don't remember now.
Click to expand...
Click to collapse
I am using http://forum.xda-developers.com/showthread.php?t=2450358, no problems for me
stable rom
HI
I'm using CM11 Milaq and its very stable. There's still some things that aren't working. Like camera,Netflix version 3.x..etc. Buts its a very stable build. The best build I ever had installed that was really stable and ever thing worked, was evervolv CM10.2. This ROM was really good and stable I don't remember ever having any problems with it at all.

[Q] Maclaw ROM 16 03 2014 4.4.2 KIT problems RANDOM REBOOTS

Hi, i have S3 Mini, and i have installed maclaw's rom 4.4.2 CM11, and now Carbon, all recent updates... I have the problem of random reboots when im charging or when i have a poor signal or less battery... When i'm ussing a lot of CPU, this automatly reboot.. How can i fix it? I tried to flash RIL and MODEM of STOCK rom and the reboots are less now, but, this keep going on... Some answer?
PS.: After reboot, my battery lvl was 27% and now 82% for example... When the battery shows 100% i need to restart 10 or 12 for fully charging 100%.... I think the signal is the major problem and de CPU... I'm using PEGASUS(before INTERACTIVE)
You can't do anything about the random reboots since it is a CyanogenMod bug. Did you do a clean install or a dirty flash?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
You can't do anything about the random reboots since it is a CyanogenMod bug. Did you do a clean install or a dirty flash?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
Yes, wipping ALL... For the first time, after full charge, when i wipe dalvik cache the problem was fixed, the next charge the problem persist... Now, i'm charging phone, if i dont have DATA mobile ON, or wifi ON, the phone's doesn't reboot automatly... When i switch on, the phones reboot.... I think the problem is the signal or the high cpu utilization...
certum said:
Yes, wipping ALL... For the first time, after full charge, when i wipe dalvik cache the problem was fixed, the next charge the problem persist... Now, i'm charging phone, if i dont have DATA mobile ON, or wifi ON, the phone's doesn't reboot automatly... When i switch on, the phones reboot.... I think the problem is the signal or the high cpu utilization...
Click to expand...
Click to collapse
I'm running the same ROM and I don't have any of those problems (except for a few random reboots). Did any of those problems exist on stock?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
I'm running the same ROM and I don't have any of those problems (except for a few random reboots). Did any of those problems exist on stock?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
No no no, in the stock rom everythins works fine..
certum said:
No no no, in the stock rom everythins works fine..
Click to expand...
Click to collapse
Weird. Then I'm afraid I can't help you :/.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
Weird. Then I'm afraid I can't help you :/.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
Actually, i updated the rom to new release 16 03 2014, "Updating Android", and the ROM has random reboots.... I'm very tired of this hahaha
i have the same problems I get random reboots quite often and when I receive a message on whatsapp, it reboots aswell
certum said:
Actually, i updated the rom to new release 16 03 2014, "Updating Android", and the ROM has random reboots.... I'm very tired of this hahaha
Click to expand...
Click to collapse
LMH1998 said:
i have the same problems I get random reboots quite often and when I receive a message on whatsapp, it reboots aswell
Click to expand...
Click to collapse
Those random reboots known are CM 11 bugs. Maybe you should report them to Maclaw. Maybe he can fix it, or else you'll have to wait for the CM team to fix it.
Remember, CM 11 is still under heavy development, so bugs are still present.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
Those random reboots known are CM 11 bugs. Maybe you should report them to Maclaw. Maybe he can fix it, or else you'll have to wait for the CM team to fix it.
Remember, CM 11 is still under heavy development, so bugs are still present.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
I'm very decided thats the problem is volting or CPU freq... If you doesn't have activated the internet/red signal, and you run a stability test, the phone crushs too... So, i download SetCPU and Voltage Control and i can't see the voltages of freqs!! How can i see that? You know?
I tried to disable xposed frameworks, this incresed the cycle of reboots, more stability, but this is because the CPU doesn't work at max voltage... So, the next question is:
How can i change the voltage frequencies???
certum said:
I'm very decided thats the problem is volting or CPU freq... If you doesn't have activated the internet/red signal, and you run a stability test, the phone crushs too... So, i download SetCPU and Voltage Control and i can't see the voltages of freqs!! How can i see that? You know?
I tried to disable xposed frameworks, this incresed the cycle of reboots, more stability, but this is because the CPU doesn't work at max voltage... So, the next question is:
How can i change the voltage frequencies???
Click to expand...
Click to collapse
The kernel is not capable of that. If your CPU can't run on maximum voltage, it means it is a hardware problem, so you'll have to return it to the store where you bought it.
GXGOW said:
The kernel is not capable of that. If your CPU can't run on maximum voltage, it means it is a hardware problem, so you'll have to return it to the store where you bought it.
Click to expand...
Click to collapse
I don't say that, i say the problem is in the kernel, the kernel have issues with GPU at max freq or max voltage... My phone have 6 months, and the stock ROMS works fine at 1Ghz and max. voltage... I dont concider the phones have hardware problem... Today i'll be tried to put stock kernel and test that..
certum said:
I don't say that, i say the problem is in the kernel, the kernel have issues with GPU at max freq or max voltage... My phone have 6 months, and the stock ROMS works fine at 1Ghz and max. voltage... I dont concider the phones have hardware problem... Today i'll be tried to put stock kernel and test that..
Click to expand...
Click to collapse
Installing the stock kernel over this ROM is a bad idea, since the stock kernel is made for 4.1.2 and you're running a 4.4.2 ROM. You better return to the whole stock ROM.
GXGOW said:
Installing the stock kernel over this ROM is a bad idea, since the stock kernel is made for 4.1.2 and you're running a 4.4.2 ROM. You better return to the whole stock ROM.
Click to expand...
Click to collapse
((( the stock rom is a lazy rom
certum said:
((( the stock rom is a lazy rom
Click to expand...
Click to collapse
I know, that's why I've switched to custom ROMs. I'm sorry, but I can't help you any further
Odin
I always flash the roms with odin and had never any reboots...
All right, i dont see the diference, but, i try this method so
Any update on this? I'm having the same issue (reboots, batery goes from 90% to 20%...) with Maclaw's CM11.

Categories

Resources