Database Develop

[Q] Want To Turn AT&T HTC One Into Developer's Edition

Hello everyone!
I have an AT&T HTC One that is S-Off, relocked, SuperCID, black HBoot 1.54, currently on ViperOne 2.7 with stock kernel. I've been trying for the past day and a half to get the 3.22.1540.1 Brightstar WWE to run so I could have it back to stock with the most current OS. I also want to fully convert it to a Developer's Edition phone as well. I thought that with SuperCID you could run any RUU but so far every single time it ends in an error. I also tried changing the CID to the Developer's Edition CID (BS_US001) and still came back with the same error. So here I am on the greatest place in the world for Android phone assistance and advice asking for help in getting my phone converted to a Developer's Edition and/or on the 3.22 RUU. Thanks in advance for any help.
P.S. I already did try to search like crazy for the answers to my questions.!

Well you may need a stock recovery to run an ruu.exe. And I'd recommend going back to super-cid and then running the ruu as well. Be sure you back up all your information that you do then wish to lose, as the ruu will format the entire phone.
Sent from my HTC One using Tapatalk 4

Willieumm said:
Hello everyone!
I have an AT&T HTC One that is S-Off, relocked, SuperCID, black HBoot 1.54, currently on ViperOne 2.7 with stock kernel. I've been trying for the past day and a half to get the 3.22.1540.1 Brightstar WWE to run so I could have it back to stock with the most current OS. I also want to fully convert it to a Developer's Edition phone as well. I thought that with SuperCID you could run any RUU but so far every single time it ends in an error. I also tried changing the CID to the Developer's Edition CID (BS_US001) and still came back with the same error. So here I am on the greatest place in the world for Android phone assistance and advice asking for help in getting my phone converted to a Developer's Edition and/or on the 3.22 RUU. Thanks in advance for any help.
P.S. I already did try to search like crazy for the answers to my questions.!
Click to expand...
Click to collapse
No need to relock boot loader because the developer edition comes by default unlocked. Unlock it to continue. You need to change your CID to 11111111 (super CID) and you need to flash the 1.44 hboot (I believe) the black hboot may be causing the problem.

Downgrade to the lowest firmware you can find for the Developers edition.
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
(Yes, twice.)
Check to be sure everything was successful.
fastboot reboot-bootloader
Make sure the bootloader is locked.
Run the ruu.
Let it do its thing.
Boot the phone and set it up.
Go to settings - about phone - software information - system update.
Allow it to download and update.
Repeatedly check for update until you reach 4.3
Sent from my HTC One using XDA Premium 4 mobile app

Hi there,
Did you get it work 3.22.1540.1 dev edition on your phone?, im still stuck in the same problem, got an HTC One AT&T, i got working the RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (dev edition), when i check for updates, there's an update of 17mb, after updating that one, i check again and found the 3.22.1540.1 OTA (around 550mb), i downloaded and agree to install it, but when reboot the phone, it got stuck in the HTC logo screen, did not go further, even trying to get into recovery, same thing, got stuck in HTC logo screen.
Another test i did, was installing RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe and even the zip version, both of them install correctly but same problem, got stuck in HTC Logo screen, right now my phone is Unlocked bootloader, S-off with supercid (also tried the BS_US001 CID, same problem), hboot 1.55, is there any chance someone can help me with it? thanks a lot

leca27 said:
Hi there,
Did you get it work 3.22.1540.1 dev edition on your phone?, im still stuck in the same problem, got an HTC One AT&T, i got working the RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (dev edition), when i check for updates, there's an update of 17mb, after updating that one, i check again and found the 3.22.1540.1 OTA (around 550mb), i downloaded and agree to install it, but when reboot the phone, it got stuck in the HTC logo screen, did not go further, even trying to get into recovery, same thing, got stuck in HTC logo screen.
Another test i did, was installing RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe and even the zip version, both of them install correctly but same problem, got stuck in HTC Logo screen, right now my phone is Unlocked bootloader, S-off with supercid (also tried the BS_US001 CID, same problem), hboot 1.55, is there any chance someone can help me with it? thanks a lot
Click to expand...
Click to collapse
go into stock recovery and do a factory reset ..it should boot then

[Q] No cellular signal - HTC One

Hello, I have a HTC One.
I was trying to upgrade my radio after installing a new custom rom using twrp. I accidently tried to install the fastboot version of the baseband instead of the recovery flashable version with twrp. The install failed. When I rebooted my phone I was not picking up any cellular signal. In the settings under Baseband version it says “unknown”, also says “unknown” for my IMEI.
I have tried:
- installing the correct recovery flashable version with twrp.
- restoring to my backup that was made before making any changes.
- restoring back to a stock Rogers rom.
I am still not picking up any cellular signal. I also, tried to do a full firmware/radio flash using fastboot, but I received a “remote: 41 model id check fail” error.
I got the radio files from the follow link:
http://forum.xda-developers.com/showthread.php?t=2485319
If anyone has any suggestions or know what else it can try it would be appreciated.
Device info:
- Rogers htc one that is carrier unlocked running Bell SIM
- Bootloader unlocked, Rooted, S-OFF
- TWRP version 2.6.3.3
- CID = ROGER001, HBOOT = 1.44.0000
- trying to install rom from http://forum.xda-developers.com/showthread.php?t=2531235

If you have S-OFF, you have probably saved your bum
Have you tried flashing a full RUU yet? You will need to find a RUU with a CID of ROGER001
It is also *possible* that you could change your CID to 1111111.
Let me see what I can find for you.
---------------------
Quick search didn't turn up anything for the ROGER001, have you ever changed CID? I would change it to the brightstar one and flash that...
---------------------
Here we go!
http://forum.xda-developers.com/showthread.php?t=2636103
Read the guide for flashing RUU's and you should be good to go!

Change your CID to BS_US001 and run the RUU listed here: http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_brightstarus_wwe_1-29-1540-16-exe/
There is no RUU for Rogers/Bell/Telus.

Thanks
Thank you guys. Changing my CID and flashing with the brightstar RUU fixed my cellular signal issues. You guys are the best.
The RUU has made my phone close to stock. I am back to HTC sense software and I was able to do an OTA update. The only thing I still have is S-OFF. Also, upgraded my HBOOT to 1.56.
What I would like to know, is it possible to make my phone seem like the GPE version HTC One and get OTA updates from Google and have no HTC sense software. My dream is to be able to pick any hardware and run vanilla android, and receive the updates right away. Please let me know if there is a way.
Once again thanks for the help you guys saved a phone.

[FIX/WORKAROUND] Applying RUU.exe causing fastboot-htc.exe has been stopped.

Hey xda,
i recently turned my HTC One into a Google Play Edition with the Conversion RUU Zips and just wanted to get back to WWE Stock and used a RUU from HTC for this, but everytime and on multiple devices I was getting the error:
"fastboot-htc.exe has stopped working..." and the whole program just crashed. (the phone wasnt bricked, even after many times.)
at the Beginning of flashing the RUU.
I solved it by flashing a Combined TWRP Custom Firmware Package from this thread (use Combined, NoWipe ZIP's with same version of ruu) and then repeat the RUU.. and this time it worked. (List of all Firmware)
I select the version that the RUU was going to flash (for example at mine: 4.19.401.9 for the same RUU version)
[* also with unlocked bootloader and S-OFF, no need to change that!]
Maybe the RUU doesnt like the GPE Firmware, but this was the solution.
Cheers.

Thanks! Worked like a charm.

darkarvan said:
Hey xda,
i recently turned my HTC One into a Google Play Edition with the Conversion RUU Zips and just wanted to get back to WWE Stock and used a RUU from HTC for this, but everytime and on multiple devices I was getting the error:
"fastboot-htc.exe has stopped working..." and the whole program just crashed. (the phone wasnt bricked, even after many times.)
at the Beginning of flashing the RUU.
I solved it by flashing a Combined TWRP Custom Firmware Package from this thread (use Combined, NoWipe ZIP's with same version of ruu) and then repeat the RUU.. and this time it worked. (List of all Firmware)
I select the version that the RUU was going to flash (for example at mine: 4.19.401.9 for the same RUU version)
[* also with unlocked bootloader and S-OFF, no need to change that!]
Maybe the RUU doesnt like the GPE Firmware, but this was the solution.
Cheers.
Click to expand...
Click to collapse
Man....:good:
You just saved my 300 US$
Hats off to you.
Regards,

Geez, you really saved it - thank you so much!!

You saved my bacon as well! The husbando is trying to go another month or two with his M7 Dev Edition that I converted to GPE and wanted to convert back to stock! <3 <3 <3
Thanks a bunch!

htc m7 serious help needed

hello all,
i am having problem with m7_ul cid tmob101
according to customer he tried to unlock it with sieempi methos and installed philz recovery and accidentaly format the system partition of phone
now the problem is phone is at latest version 4.4.2 i think. No ROM available for this version i think
i tried all possible things to recover the phone like bootloader unlock, custom recovery, sideload rom installing etc etc
always signature error, may be CID missmatch or hboot lower version...
need serious help in this phone
phone original info is:
HBOOT:1.57.000
MAIN OS: 5.14.531
RADIO: 4T.XXX.
TMOB USA BRANDED
NEED GUIDANCE TO REVIVE MY PHONE...
gurinder

If you're trying to return to stock, here is a complete stock tutorial. youtube.c om/watch?v=uEBAKSDxbkI. I hope that helps.

@gurinder Go to the T-Mobile HTC One forum and search for the latest RUU 5.14.531. Then run the RUU. I would provide the link but I'm not at the computer.

i have not found this firmware as RUU or zip.. i think this verison is OTA and none of other version installing on phones coz of hboot higher version.. need help in this.. i tried those both tmob firmware available on forum. always signature error or error 155 ( tries in both ways) bootloader unlocked and locked with cutom recovery and original stock recovery
any help guys

thanu guys i found the stock rom and paid for and my phone ok now.. thnx all for help

[Q&A] [RUU] Google Edition Conversion. 4.4.2 RUU Zip pre-rooted/non-rooted + Firmwar

[Q&A] [RUU] Google Edition Conversion. 4.4.2 RUU Zip pre-rooted/non-rooted + Firmwar
Q&A for [RUU] Google Edition Conversion. 4.4.2 RUU Zip pre-rooted/non-rooted + Firmware
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RUU] Google Edition Conversion. 4.4.2 RUU Zip pre-rooted/non-rooted + Firmware. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

s_off question
liam_davenport said:
I had no problem with receiving update with the stock recovery installed
---------- Post added at 10:49 AM ---------- Previous post was at 10:47 AM ----------
Don't go from 4.x.xxx.xx to 5.xx.xxx.xx I've had the firmware bug that bricks you're device, it's a pain have to set up linux and run some commands
Click to expand...
Click to collapse
will the process retain s off? Thanks in advance

crazyandroid said:
will the process retain s off? Thanks in advance
Click to expand...
Click to collapse
the only way your phone can turn back to s-on is if you enter the right command manually "fastboot writesecureflag 3"
S-OFF will never turn back to S-ON by itself

alray said:
the only way your phone can turn back to s-on is if you enter the right command manually "fastboot writesecureflag 3"
S-OFF will never turn back to S-ON by itself
Click to expand...
Click to collapse
Thank you for the quick reply.

running into a problem
First time back with an HTC since the nexus one. so bear with my on the of the HTC exclusive setting, options and what not.
I keep getting an error code "FAILED (remote: 99 unknown fail)" when i try and flash the ROM, I get the error code in the same spot i would get an error the first time I ran the code. this is a different code than what he said I would get. any direction on what i need to change is greatly appreciated!
Here is the code i get --------------------------------
Tanners-MacBook-Pro:Mac Tanner$ ./fastboot flash zip RUU-HTC_One_GE-4.4.2-3.62.1700.1_Rooted.zip
sending 'zip' (514596 KB)...
OKAY [ 20.864s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 21.109s
Tanners-MacBook-Pro:Mac Tanner$
--------------------------------------------------------------
sOther Information:
Build Number 4.18.502.7 CL302626
Baseband Version "Unknown"
HBOOT 1.44
Radio 4A.17.3250.20

That might be a corrupted download. Did you try redownloading it?

I may have actually found the problem. This phone is all sorts of messed up, when i got it, it had a custom ROM, (Which was stuck on the HTC Logo), a CWM recovery, but still S-ON.
I have ran firewater and Revone methods to turn S-Off. The first time i ran it is said successful, but I never bothered to confirm.
I got it working and i was able to grant root access to applications but their were reboots ever 1-2 minutes. so i flashed a new ROM.
now, i have a working ROM (still have the random reboots), SuperSU tells me i need to update my binaries, and i still have S-ON.
I am sure they are all related, and my main goal is to get S-OFF, but i don't know how. i should quit messing around with HTC and just stick with what i know, the Nexus phones.

teport said:
I may have actually found the problem. This phone is all sorts of messed up, when i got it, it had a custom ROM, (Which was stuck on the HTC Logo), a CWM recovery, but still S-ON.
I have ran firewater and Revone methods to turn S-Off. The first time i ran it is said successful, but I never bothered to confirm.
I got it working and i was able to grant root access to applications but their were reboots ever 1-2 minutes. so i flashed a new ROM.
now, i have a working ROM (still have the random reboots), SuperSU tells me i need to update my binaries, and i still have S-ON.
I am sure they are all related, and my main goal is to get S-OFF, but i don't know how. i should quit messing around with HTC and just stick with what i know, the Nexus phones.
Click to expand...
Click to collapse
you indeed need s-off to flash this ruu and you'll (maybe) have to change your cid/mid to match the android-info.txt file packed in that ruu.
Achieving s-off on hboot 1.44 is simple:
flash ARHD 31.6 (this rom is pre-rooted and have the correct unsecured kernel for the s-off exploit to work)
Then follow instructions from Revone thread.
when s-off is acheived, confirm that your cid and mid match the android-info.txt file of the ruu (or change CID/MID so they match)
Flash the ruu in RUU mode:
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_file.zip
fastboot flash zip name_of_file.zip
fastboot reboot
Never s-on and relock bootloader when using GPE

Can I just flash the newest firmware? Or there is a different firmware for gpe?

htc one m7 convert GPE questions.
htc one m7
model pn07100
android 4.3
htc sense 5.0
hboot 1.55
unlocked
I want to convert my m7 to a GPE. before i do anything to my phone ,I have a few questions to ask...
i want to install the RUU-HTC_One_GE-4.4-3.62.1700.1.zip rom (non rooted) http://forum.xda-developers.com/showthread.php?t=2358781
- does that mean i dont need to root my phone if im flashing the non rooted rom?
- my device is unlocked but in the bootloader is says that its locked in the menu. does that mean i still have to unlock the bootloader? is there a difference between having an unlocked phone and having an unlocked bootloader?
- do i need to install sync manager and install drivers for my phone?
- will i be able to receive updates from google OTA? do i need to flash stock recovery in order to receive OTA updates from google?
- how would i back up my stock rom (android 4.1.2 w/ htc sense 5.0) if i decide to go back.
- after the flash will i have to re-install all my apps?
thanks.

S-off mandatory
Hello, is absolutely essential s-off? If the device is only unlocked bootloader via HTCdev? The procedure will fail completely?

duzera said:
Hello, is absolutely essential s-off? If the device is only unlocked bootloader via HTCdev? The procedure will fail completely?
Click to expand...
Click to collapse
are you asking seriously or....?
Prerequisites
S-Off, <--------
ADB knowledge
Fastboot knowledge
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=43459658&postcount=1

i installed the google play edition for htc one m7 4.4.2 rom. how do i add/remove panels? i dont see any personalize settings in the menu? i've tried a search and no results.

graphic glitches
I have successfully converted my phone to GPE4.4.2 using the exact methods. There is no problem with that. Problem started once I did an OTA to update it with 4.4.3 where there are graphic glitches on the status bar and the bottom part of the screen. Also the power off panel won't appear after pressing (holding) the power button. Anyone suffered this? any solutions?
Edited : Problem solved by changing phone's CID. I can't change the RUU android-info's CID because the glitch would be there as the OTA's CID is GOOGL001.

Sprint?
Hey guys, does this RUU work with Sprint yet?

when upgrade to lollipop
have this problem: mount failed to mount /dev/block/mmcblk0p037 at /data device or resource busy
how to solve it ?
in 4.4.4, stuck recovery, unrooted

It doesn't affect anything. Just let it keep going. The update takes a while because it is using the older patch method.

recovery
where can I find stock recovery for gpe rom 4.4.4/4.9.1700.1 thanks in advance

I get this too but I get FAILED (remote: 42 custom id check fail) when I reboot it just reboots back into cyanogenmod11

Cillian.K said:
I get this too but I get FAILED (remote: 42 custom id check fail) when I reboot it just reboots back into cyanogenmod11
Click to expand...
Click to collapse
wrong cid make sure your cid is compatible with the ruu