Introduction:
This is a restore zip for restoring/debricking a molly device (ADT-1).
The contents are as close to stock as possible, and is intended to fix broken otas.
Click to expand...
Click to collapse
File List:
update-molly-Stock-LPV79-1.zip
Click to expand...
Click to collapse
FAQ:
Will this fix my <non molly device>?
No, this rom is only for mollys, it will brick any other device.
Will OTAs work after flashing this?
Yes, that is the purpose of this
Do I need to be on a certain bootloader to use this?
No, it includes the original bootloader.
Do I need a custom recovery to flash this?
Yes, the stock recovery will not accept update zips that are not signed by google
Is this rooted?
No, the stock rom is not rooted, neither is this
My device won't finish booting after flashing.
If you were not originally on the same rom, you may need to do a factory reset to finish the process. Android does not like rom downgrades without a factory reset
Click to expand...
Click to collapse
Changelog:
Nov 3, 2014: Initial Page
Click to expand...
Click to collapse
2char
I made a gallery of it because I felt like it: Update - Imgur
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
death2all110 said:
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
Click to expand...
Click to collapse
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
TheManii said:
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
Click to expand...
Click to collapse
Duh. Didn't think of that... Haha. Thanks!
Could someone who has updated to LPX13D please post a system dump? Im needing it for an OUYA port that im working on. Thanks
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
death2all110 said:
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
Click to expand...
Click to collapse
Thanks, never would have found it there.
TheManii said:
2char
Click to expand...
Click to collapse
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
ScubaXsays said:
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
Click to expand...
Click to collapse
Yes a USB keyboard is needed to move around CWM on the ADT-1
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
Thanks so much for the quick response, you're the best.
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
No problem. I had the same problem initially
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
TheManii said:
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
Click to expand...
Click to collapse
Thanks for the articulate follow-up. I started to do things manually via ADB. :good:
anyone can post a complete lpx13D CWM backup , stock recovery or at least system.img
I've messed up my ADT1 and it can't seem to take the image I've found yet
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Unjustified Dev said:
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Click to expand...
Click to collapse
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
halfluck said:
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
Click to expand...
Click to collapse
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Unjustified Dev said:
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Click to expand...
Click to collapse
Wow that is really impressive work, The current build on the ADT-1 is flaky at best for me, i'd love to see how a more recent build performs and if it prevents me from having to do a daily reboot.
Cheers Rob.
@Unjustified Dev just got mine on Tuesday. are you thinking releasing sources on your team github. i saw that a device and kernel repository was created but they are empty.
PS: nice to talk to you again been a while.
Related
BUGS
Wired headset/headphone is not working.
CM Bugs - Boot Animation disappears.
Torch - Hangs/Causes FC
Camera - Freezes after a snapshot. (Possible Fix)
Click to expand...
Click to collapse
DOWNLOAD
v3.8.2
This is a completely different port and all previous fixes will be invalid. And you will have to erase data and cache and dalvik-cache completely!
Do a factory wipe.
Flash this ROM.
ROM
Boot into the ROM.
Then, reboot into recovery and flash Gapps.
GApps
Boot into the ROM. Setup your Google Account.
Reboot into the recovery and flash this fix.
Fix-2 for 3.8.2
Click to expand...
Click to collapse
SCREENSHOTS will come soon.
For now, please flash this and provide us with some feedback. Let's get this thing up and running. :highfive: :laugh:
CREDITS
@fareeed
@Taylor_Swift
@Everyone who worked on getting MIUI running
Click to expand...
Click to collapse
Omar! This is for you lol :good:
I shall take this.
And this last one.
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
alnikki25k said:
Omar! This is for you lol :good:
Click to expand...
Click to collapse
Thanks bro. I'll be posting fixes and also Sony based builds too
Sent from my C6603 using xda premium
theminigame said:
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
Click to expand...
Click to collapse
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Thanks a lot for what all of you did to getting MIUI on the Xperia Z !
I will be following this thread to give you feedback.
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
The MIUI V5 Rom work very well. Unfortunately, there is the SD Card problem who cause a lot of ForceClose. But i'm sure you will get it work.
Keep the good work guys !
PS: Sorry for my bad english speaking, i'm french.
EmryX said:
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
Click to expand...
Click to collapse
The recovery is built into the kernel. If you want me to post CWM, I shall post another boot.img. However, I do suggest you to try TWRP. It's much faster and easier.
The recovery is built into the kernel
Click to expand...
Click to collapse
Oh, i didn't know that. Sorry
I don't want to bother you with this. But if you could teach me how i can put my recovery on your build, i will be happy
And keep Mega.Co for the build upload, it's awesome and fast !
Fix-1 By lzyllp.
Fix google pinyin input FC
remove unused settings option from One
add customize screen key positions
fix wrong storage list in framework-res but storage still not work now
http://www.mediafire.com/download/0q3vn350kq0v3mh/Fix-1.zip
for google aosp input FC.
U only need take the lib from input apk and put it into system lib
Some screenshots
Perfect !!!miui are the best rom ever!!!!
alnikki25k said:
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Click to expand...
Click to collapse
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Crashes in Permission manager, so I can't get root.
[email protected] said:
Crashes in Permission manager, so I can't get root.
Click to expand...
Click to collapse
SuperSU. Just got Settings/About to work as well
Sent from my C6603 using xda premium
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Alhaddad said:
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The storage maybe the services.jar problem.
In services.jar.out\smali\com\android\server the all filename start with MountService
I think we need patch some code from yuga
this services mount the usb storage
Taylor_Swift said:
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I was actually thinking about this as well. If we could get Sense 5 to work somehow, it would be fantastic! And go ahead and steal lol. I am working on mounting the storage now.
I've just built AOSP from master branch.
The most interesting thing is the optimized ART runtime. It's enabled by default and works with much more apps now.
I didn't try it on N4 yet, but on a similar device which basically is hardware compatible.
2014-05-22:
update
2014-05-21:
first build
Click to expand...
Click to collapse
Download:
http://d-h.st/s9Q
Screenshot:
First
My dear @zelendel , just to let you know. The similar device is a Xiaomi Mi2, are u sure there's still
Not enough development
Click to expand...
Click to collapse
?
4.4.3? Did I miss something?
Dark Emotion said:
4.4.3? Did I miss something?
Click to expand...
Click to collapse
Still a preview. Nothing official yet
Sent from my mi²s
Dark Emotion said:
4.4.3? Did I miss something?
Click to expand...
Click to collapse
it's from master branch.
basically it's a mix between 4.4.3 and 4.5.
Google pushes core changes to master branch and hobby devs can use gerrit to merge changes into that branch.
The new features and UI changes are still closed source until google releases a new android update.
something that stands out in this rom? Thanks for the work @m11kkaa
slipknot31 said:
something that stands out in this rom? Thanks for the work @m11kkaa
Click to expand...
Click to collapse
mainly ART, because it should work with much more(maybe all) apps now.
And many small optimizations.
m11kkaa said:
I've just built AOSP from master branch.
The most interesting thing is the optimized ART runtime. It's enabled by default and works with much more apps now.
I didn't try it on N4 yet, but on a similar device which basically is hardware compatible.
Click to expand...
Click to collapse
Unknown Baseband
snak3ater said:
Unknown Baseband
Click to expand...
Click to collapse
Mi2 is not a nexus 4, but just similar, here's why the screenshot says this
Sent from my mi²s
snak3ater said:
Unknown Baseband
Click to expand...
Click to collapse
It will work on n4 but it would be great if someone could confirm it and post a screenshot so I can update the OP
Sent from my MI 2 using Tapatalk
m11kkaa said:
It will work on n4 but it would be great if someone could confirm it and post a screenshot so I can update the OP
Sent from my MI 2 using Tapatalk
Click to expand...
Click to collapse
i have flash this rom,but i lost my recovery,so how can i flash a recovery?thanks..
aliver.dun said:
i have flash this rom,but i lost my recovery,so how can i flash a recovery?thanks..
Click to expand...
Click to collapse
CWM should have asked you to disable recovery flash.
anyway. you can easily flash recovery from fastboot
m11kkaa said:
CWM should have asked you to disable recovery flash.
anyway. you can easily flash recovery from fastboot
Click to expand...
Click to collapse
thanks for your quick reply,can you teach me as my computer can't find adb..
I am going to try right now...give me sometime and I post my screenshot
and BTW thanks for your work on this !
aliver.dun said:
thanks for your quick reply,can you teach me as my computer can't find adb..
Click to expand...
Click to collapse
I can't explain you in detail. especially not for windows.
But this could help you: http://forum.xda-developers.com/showthread.php?t=2266638
Installed and working ok
Installed on my Nexus 4 and everything works ok. Installed Banks' latest Gapps too. TWRP still working.
One weird thing is there's a red square flashing around the edge on some screens.
Have to go out so didnt have time to mess around any more.
divvykev said:
Installed on my Nexus 4 and everything works ok. Installed Banks' latest Gapps too. TWRP still working.
One weird thing is there's a red square flashing around the edge on some screens.
Have to go out so didnt have time to mess around any more.
Click to expand...
Click to collapse
thx.
That's because this is a engineering build.
I can make a userdebug build next time.
divvykev said:
One weird thing is there's a red square flashing around the edge on some screens.
Click to expand...
Click to collapse
Just edit build.prop (/system/build.prop) look for ro.build.type=eng and change it to ro.build.type=userdebug
Sent from my mi²s
linuxxxx said:
Just edit build.prop (/system/build.prop) look for ro.build.type=eng and change it to ro.build.type=userdebug
Sent from my mi²s
Click to expand...
Click to collapse
Thanks for this. Had a moment when I thought, Oh oh!
Any noticeable changes? The dialer?
Hello.
i have a question if there is possible to enable led control on Nexus stock M 6.01 MMB29V without TWRP and root.
Thanks and rgds.
semail00 said:
Hello.
i have a question if there is possible to enable led control on Nexus stock M 6.01 MMB29V without TWRP and root.
Thanks and rgds.
Click to expand...
Click to collapse
Without Root - yes (you can use this > http://forum.xda-developers.com/nexus-6/general/led-control-stock-xposed-t3146814
Without TWRP - no
cam30era said:
Without Root - yes (you can use this > http://forum.xda-developers.com/nexus-6/general/led-control-stock-xposed-t3146814
Without TWRP - no
Click to expand...
Click to collapse
I would not advise doing that. As the file is from 5.1.1 there is no telling what changes to the system that has been done.
zelendel said:
I would not advise doing that. As the file is from 5.1.1 there is no telling what changes to the system that has been done.
Click to expand...
Click to collapse
You are correct. I should have been more specific. Post #95 includes file download from CM13 (Android 6.0). Working fine for me on MMB29V.
cam30era said:
You are correct. I should have been more specific. Post #95 includes file download from CM13 (Android 6.0). Working fine for me on MMB29V.
Click to expand...
Click to collapse
Even then that is for that build. It may cause other issues on different builds.
zelendel said:
Even then that is for that build. It may cause other issues on different builds.
Click to expand...
Click to collapse
I agree. It could. But isn't that what we all do here about that? Modifications that are not necessarily 100% bullet proof? And looking for feedback from others who are using it..?
semail00 said:
... possible to enable led control on Nexus stock M 6.01 MMB29V without TWRP and root....
Click to expand...
Click to collapse
It seems to me that you already know the answer. You are familiar with the terms TWRP and root.
Beside the question you need to give a motive.
NLBeev said:
It seems to me that you already know the answer. You are familiar with the terms TWRP and root.
Beside the question you need to give a motive.
Click to expand...
Click to collapse
Hello,
I just wanted to see if it was possible activate led notification without changing the original system, even with some apks ( I do not know but that someone could know ). This was the meaning of my request ..... I apologize if I have not been able to explain.
rgds.
semail00 said:
Hello,
I just wanted to see if it was possible activate led notification without changing the original system, even with some apks ( I do not know but that someone could know ). This was the meaning of my request ..... I apologize if I have not been able to explain.
rgds.
Click to expand...
Click to collapse
Understood. It is nice to know the 'why' behind questions.
On my N6 I've LED control, but with a Lite rom of Danvdh and the cataclysm mod. Works good, but .......root and TWRP.
Welcome to a world of new they called me walker or walkerblue
FLASH AT YOUR OWN RISK!!
Today im bringing you guys a twrp that still in works
If any devs that would like to help to get all working make our Z2 force page grow faster
I'll be making a hangout chat for devs only!
https://hangouts.google.com/group/ksHPFhZPgjPZBd292
TWRP boots so far for T-Mobile ,Sprint
First I want to thank these people for making everything easy and possible for us in XDA
Thanks to @shimp208 for making Minimal ADB tool easy to use and also thanks to TWRP team for making root easy
Okay now to install this recovery
First make sure you all all drives on computers installed
USB Link: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78830/p/30,2625,665
ADB Link: https://forum.xda-developers.com/showthread.php?t=2317790
Beta recovery Link: https://drive.google.com/open?id=0BxohOX1FGysPaV9ObDVFVjNZWU0
Step Two: Ones you have all your files now you need is the commond to flash this recovery img
So in ADB tools make sure you put the recovery in the folder on where you have it located in your computer
then make sure you hit cmd-here or the icon app that tool left you on your desktop
Then ones that happens make sure you have debugging check on your device
then run this on cmd "adb devies" to make sure your device is listed
then after you have done that make sure you run this commend next "adb reboot bootloader"
ones you do that then your phone should take you too bootloader page then you can flash recovery file
then you will put this commend "fastboot flash boot beta.img""
then ones you do that make sure you use your arrows on your side of your device to get into recovery
Then BOOM your have your twrp flashed
Hit the Big Thumps up for me
Five Star this page
Share Share this page
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Infect_Ed said:
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Click to expand...
Click to collapse
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
walkerblue2023 said:
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
Click to expand...
Click to collapse
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Infect_Ed said:
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Click to expand...
Click to collapse
thier is no github for it yet but for some reason i was able to get it too boot kinda weird got the stock recovery and twrp recovery made it into one and thier you go it booted up on the phone but with no root
What tree did you use?
Infect_Ed said:
What tree did you use?
Click to expand...
Click to collapse
mk is only the one that booted it up
Sweet
Sent from my SM-N930F using XDA-Developers Legacy app
All good news!!
walkerblue2023 said:
mk is only the one that booted it up
Click to expand...
Click to collapse
What do you mean mk?
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
My bad I mean mtk tool
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
Z2 play what I used
[delete]
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
How if it boots for me I might have uploaded the wrong file
shouldn't it be "fastboot flash recovery beta.img"?
FrankenDroid said:
shouldn't it be "fastboot flash recovery beta.img"?
Click to expand...
Click to collapse
Recovery is in the kernel on this phone.
Sent from my Moto Z (2) using Tapatalk
Ah, interesting. I think it's probably time to get smart on this new partitioning stuff
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Uzephi said:
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Click to expand...
Click to collapse
thank you for the information and also cant wait for your kernel
Samsung replied to my OSS request today with word that they'd shared kernel source for the 2019 Galaxy Tab A 10.1 [SM-T510/T515].
http://opensource.samsung.com
The version posted is T510XXU1ASC7, which matches the latest OEM firmware available online:
https://samfrew.com/model/SM-T510/
https://samfrew.com/model/SM-T515/
This will unblock my TWRP development and should also enable efforts to build most custom ROMs for the new hardware.
Great stuff! Just bought a T510, hope to receive the tablet today.
beta990 said:
Great stuff! Just bought a T510, hope to receive the tablet today.
Click to expand...
Click to collapse
You will not regret it
I am so happy with it after I managed to root it.
Other than using "key combo" to turn it on, everything works as it's supposed to including Titanium Backup.
There's some headache on T590 and the users cannot use Titanium Backup even it's rooted
mingkee said:
You will not regret it
I am so happy with it after I managed to root it.
Other than using "key combo" to turn it on, everything works as it's supposed to including Titanium Backup.
There's some headache on T590 and the users cannot use Titanium Backup even it's rooted
Click to expand...
Click to collapse
HI, I just got T515 to use on a project. I am very new to android and I would like to root it for the project. So far I follow "getdroidtips" but it almost break my tablet. Any suggestion on rooting?
sanhapie said:
HI, I just got T515 to use on a project. I am very new to android and I would like to root it for the project. So far I follow "getdroidtips" but it almost break my tablet. Any suggestion on rooting?
Click to expand...
Click to collapse
+1 Any one manage to root?
Pinage said:
+1 Any one manage to root?
Click to expand...
Click to collapse
I built NoKnox and TWRP for the SM-T515 after they posted the kernel source, but my volunteer tester couldn't get them to work. Maybe you'll have better luck?
(Unfortunately, I don't have the hardware to test myself. They're not selling them in the U.S.)
Magendanz said:
I built NoKnox and TWRP for the SM-T515 after they posted the kernel source, but my volunteer tester couldn't get them to work. Maybe you'll have better luck?
(Unfortunately, I don't have the hardware to test myself. They're not selling them in the U.S.)
Click to expand...
Click to collapse
Where is the xda url? Let me read up and see if I can help.
Pinage said:
Where is the xda url? Let me read up and see if I can help.
Click to expand...
Click to collapse
The TWRP development thread for Galaxy Tab A 10.1 (2019) is here, but the builds for SM-T515 weren't posted because they never made it through testing.
Magendanz said:
The TWRP development thread for Galaxy Tab A 10.1 (2019) is here, but the builds for SM-T515 weren't posted because they never made it through testing.
Click to expand...
Click to collapse
What happen during testing. Anyway to help? Really wish root is available.
Pinage said:
What happen during testing. Anyway to help? Really wish root is available.
Click to expand...
Click to collapse
The TWRP and NoKnox builds for SM-T515 are linked in this post, and you're welcome to give them a try. I'll build another test release when we get the next kernel source update.
I bought this tablet recently which is a Korea set but i realized it comes as t515n model. Does anyone know if this twrp will work?
BTW, the T510XXU2ASI4 kernel source was published this week.
Magendanz said:
The TWRP development thread for Galaxy Tab A 10.1 (2019) is here, but the builds for SM-T515 weren't posted because they never made it through testing.
Click to expand...
Click to collapse
I managed to install TWRP on SM-T515 and root it using Magisk Zip. I tried many files but that one worked:
https://drive.google.com/open?id=1nIqcIzNHyFiwtm7b_NL_F3X-2LWouL7t
I've also backed up rooted stock using TWRP , but cannot recover it using same app.
I've also tried to install Nexus Stock ROM but failed. I'll try to learn how to compile LineageOS on this device. Any help on compiling it would be appreciated. The missing parts as I understand are:
- some way of doing backups well, so I can recover from them and go "back in time"
- TWRP flashable zip package with Nexus ROM or LineageOS
TheCyberd3m0n said:
I managed to install TWRP on SM-T515 and root it using Magisk Zip. I tried many files but that one worked:
https://drive.google.com/open?id=1nIqcIzNHyFiwtm7b_NL_F3X-2LWouL7t
I've also backed up rooted stock using TWRP , but cannot recover it using same app.
I've also tried to install Nexus Stock ROM but failed. I'll try to learn how to compile LineageOS on this device. Any help on compiling it would be appreciated. The missing parts as I understand are:
- some way of doing backups well, so I can recover from them and go "back in time"
- TWRP flashable zip package with Nexus ROM or LineageOS
Click to expand...
Click to collapse
Is yours a Korea set?
No, from Poland
TheCyberd3m0n said:
No, from Poland
Click to expand...
Click to collapse
OK it's ok. Hope someone with a Korean set can reply here if they mange to install twrp and root it.
TheCyberd3m0n said:
I managed to install TWRP on SM-T515 and root it using Magisk Zip. I tried many files but that one worked:
https://drive.google.com/open?id=1nIqcIzNHyFiwtm7b_NL_F3X-2LWouL7t
I've also backed up rooted stock using TWRP , but cannot recover it using same app.
I've also tried to install Nexus Stock ROM but failed. I'll try to learn how to compile LineageOS on this device. Any help on compiling it would be appreciated. The missing parts as I understand are:
- some way of doing backups well, so I can recover from them and go "back in time"
- TWRP flashable zip package with Nexus ROM or LineageOS
Click to expand...
Click to collapse
You can't backup stock using TWRP because the data partition is encrpted. You can format the data partition with TWRP, but you lose EVERYTHING on the partition when you do. Not just things lost when wiping, but all saved stuff like photos, videos etc.
Hi there great to see Samsung development still going on. I had rooted a Samsung tab 2 7.0 long time ago and again have a Samsung tab A 10.1 LTE(T515). I would like to know whether your ROM builds would work with the LTE variant too? With network working too?