Related
For some reason my compass seems to be poorly calibrated and when I use Google Maps the navigation works, but I sometime lose direction. In order to fix I need to rotate my phone in all different ways. But after a reboot the compass goes back to being off. Does anyone else have this issue? Is this a defect or software?
I found exactly the same issue yesterday trying to navigate around London. Google maps has been dodgy lately on my note 3, xperia z and my girlfriends HTC one s so I put it down to a bug, I might try another navigation app to see if it's the phone
BrandonPrice31 said:
For some reason my compass seems to be poorly calibrated and when I use Google Maps the navigation works, but I sometime lose direction. In order to fix I need to rotate my phone in all different ways. But after a reboot the compass goes back to being off. Does anyone else have this issue? Is this a defect or software?
Click to expand...
Click to collapse
Are you using a case? Particularly one with metal in it such as an s-view case. If so, you have to recalibrate the compass after every reboot.
jonstatt said:
Are you using a case? Particularly one with metal in it such as an s-view case. If so, you have to recalibrate the compass after every reboot.
Click to expand...
Click to collapse
this is not dependant on cases etc., same here as on note3, ... : with each reboot the calibration resets. maybe this is how samsung wants it to be!
jonstatt said:
Are you using a case? Particularly one with metal in it such as an s-view case. If so, you have to recalibrate the compass after every reboot.
Click to expand...
Click to collapse
I'm using the s view case hmmm
TML1504 said:
this is not dependant on cases etc., same here as on note3, ... : with each reboot the calibration resets. maybe this is how samsung wants it to be!
Click to expand...
Click to collapse
Do you have same issue?
This has been an ongoing issue with Samsung Phones. This is my 3rd and and none of them have worked correctly in Maps, without navigating.
When you are just driving around (not navigating) you are using the compass....
When you are navigating, Maps is using the GPS and comparing your last point to your current point to determine your direction of travel. This causes navigating to work right and non-navigating to be wrong.
I have not found a consistent solution. Also on Google Skymap, with the AR type view, it is nearly useless for this same reason. It can't seem to sense your proper orientation due to the compass issue. (though I admit to not trying skymap on the Note 4)
Its not so much a bug, as it is Samsung and Google doing things differently.
boufa said:
This has been an ongoing issue with Samsung Phones. This is my 3rd and and none of them have worked correctly in Maps, without navigating.
When you are just driving around (not navigating) you are using the compass....
When you are navigating, Maps is using the GPS and comparing your last point to your current point to determine your direction of travel. This causes navigating to work right and non-navigating to be wrong.
I have not found a consistent solution. Also on Google Skymap, with the AR type view, it is nearly useless for this same reason. It can't seem to sense your proper orientation due to the compass issue. (though I admit to not trying skymap on the Note 4)
Its not so much a bug, as it is Samsung and Google doing things differently.
Click to expand...
Click to collapse
So you have this issue with the Note 4 when using Google Maps while driving? Moving my note in all directions calibrated it but then reboot forgets.
BrandonPrice31 said:
So you have this issue with the Note 4 when using Google Maps while driving? Moving my note in all directions calibrated it but then reboot forgets.
Click to expand...
Click to collapse
I dont mess with the recalibration process. Its annoying and i hate it, but its not so bad that i recalibrate. I also dont reboot very often, but in the past, the recalibration doesnt stick for long even when not rebooting.
I love google maps for navigating, but it sucks for driving around. The biggest issue is that the screen turns off on its own when not navigating. Waze is great for driving around, it doesnt shut off the screen, and gives you all the traffic info you need. It also routes the voice through the phone regardless of if you are connected to the car by bluetooth. The biggest complaint with waze is that it isnt multi window compatible. On my rooted note 2 i used waze on the left of the screen for traffic issues, and maps on the right side of the screen for navigation.
I imported a Korean G Watch R to US. Everything works fine with the exception that I keep getting the compass calibration message 3-4 times a day.
And I don't really know how to calibrate the compass. Screen says to wave the watch in an 8 pattern but I wave it for about 5 minutes and it wouldn't calibrate....
Anyone else?
Lolento said:
I imported a Korean G Watch R to US. Everything works fine with the exception that I keep getting the compass calibration message 3-4 times a day.
And I don't really know how to calibrate the compass. Screen says to wave the watch in an 8 pattern but I wave it for about 5 minutes and it wouldn't calibrate....
Anyone else?
Click to expand...
Click to collapse
You need to go outside really tos ort it, PCs, desks and things cause it to lose calibration
Yes, apparently, I have been doing the calibration wave wrong. You have to wave the 8 in a 3D manner such that the watch face up and face down, face left and face right. Then re-cal only takes a second.
But yes, requires re-cal quite often...
Lolento said:
Yes, apparently, I have been doing the calibration wave wrong. You have to wave the 8 in a 3D manner such that the watch face up and face down, face left and face right. Then re-cal only takes a second.
But yes, requires re-cal quite often...
Click to expand...
Click to collapse
Any idea how to force calibration? I've done a reset, but that didn't help. My compass just seems to want to point North/ North West. Can't work out how to recalibrate it.
Install compassx app then in the watch enter in the app and do the 8 figure to calibrate... Then is calibrated.
That is the solution (copy from another post).
I took it off and tried moving it in an 8 pattern like i do with the phone when it asks for the same thing, that did not work.
Then i left it on the wrist and flailed wildly with my arms, everything from bowling motions to scratching behind your ear or dribbling a basket ball kind of moves wildly stitched one to the next. After like 10 seconds of that it said its calibrated, and worked ever since...
(just imagined, good thing these smartwatches do not automatically send an emergency message for a pretended seizure..)
---------- Post added at 07:26 AM ---------- Previous post was at 07:22 AM ----------
this video can help
https://youtu.be/vj26yPM6c7s
Hello all,
Today it's the third day with my LG Watch R. All in all I like it very much, although I think that the usability of the Samsung Gear 2 Neo (which I had before) is slightly better. After three days of using, I experienced some annoying bugs. Maybe it's just my fault, so maybe you are able to help me?
1. Sometimes the Watch doesn't receive any notifications. In this case my phone (Galaxy S 5) is blinking green because I received a Whatsapp message, but I got no notification on my watch...
2. Sometimes my watch doesn't vibrate, when I get a notification. (Although it worked before)
3. I don't understand, when the notification will be displayed in "fullscreen" and when it's just a small card on the display of the watch. I liked it very much on my Gear 2 Neo, that the notification are displayed in fullscreen while vibrating. Sometimes the LG Watch R does it similar, but the most of the time it only displays it as a card.
4. I can't turn the watch off, while charging it??
5. A Facer watchface stucks after several seconds. It only goes on, when I touch the monitor. Then it stucks again.
6. Is there a wear App, with which I'm able to read whatsapp messages at any time (and not only when I get a notification)?
7. Whatsapp again: Sometimes I see the pictures someone sent me in the background, sometimes not. I'm never able to see them as a real picture on the display at all.
I would be very happy, if someone is able to help me in some points. Maybe there are more people having these problems?
Many thanks in advance!!
Welcome to the Wear World
Same for me, my SW2 is more usefull than my LG-R and very very ..... better for all notifications. Notification are not the the highlight of wear.
Completely right Dersie, AWear has a very long way to go.
S-Treffi said:
Hello all,
....
Click to expand...
Click to collapse
1. It only happens to me with WhatsApp ... not always though
2. Never happened .. maybe the vibration was weak and you've missed it.
3. The notification that will be pushed by the phone (like a message) will be first displayed full screen for few seconds, then it will become small for you to pick up when you want. The GNow cards that are informational only (stocks, weather) are generated by the GNow daemon in the watch itself (based on your GNow activity on the watch) and those will be displayed directly as small, informal cards.
4. The watch face is turning black by itself if the watch is not moving (I have no idea if it's related also to the horizontal position). This behaviour is independent of the charging status. So, leave it laying down on the table and you will see that it will go into a save power mode by itself (also when you put it to charge). Is taking few minutes to get into that state.
5.That is a purely Facer problem. Not watch's fault. I've bought Facer as well as WatchMaker and both had hiccups. Watchmaker is my option so far and is my daily driver for weeks, w/o any problem.
6. -------
7. Works for me but I saw it depends on the size of the picture (the large ones take more to be transferred via BT on the watch, for viewing).
S-Treffi said:
Hello all,
Today it's the third day with my LG Watch R. All in all I like it very much, although I think that the usability of the Samsung Gear 2 Neo (which I had before) is slightly better. After three days of using, I experienced some annoying bugs. Maybe it's just my fault, so maybe you are able to help me?
1. Sometimes the Watch doesn't receive any notifications. In this case my phone (Galaxy S 5) is blinking green because I received a Whatsapp message, but I got no notification on my watch...
2. Sometimes my watch doesn't vibrate, when I get a notification. (Although it worked before)
3. I don't understand, when the notification will be displayed in "fullscreen" and when it's just a small card on the display of the watch. I liked it very much on my Gear 2 Neo, that the notification are displayed in fullscreen while vibrating. Sometimes the LG Watch R does it similar, but the most of the time it only displays it as a card.
4. I can't turn the watch off, while charging it??
5. A Facer watchface stucks after several seconds. It only goes on, when I touch the monitor. Then it stucks again.
6. Is there a wear App, with which I'm able to read whatsapp messages at any time (and not only when I get a notification)?
7. Whatsapp again: Sometimes I see the pictures someone sent me in the background, sometimes not. I'm never able to see them as a real picture on the display at all.
I would be very happy, if someone is able to help me in some points. Maybe there are more people having these problems?
Many thanks in advance!!
Click to expand...
Click to collapse
1. The App needs to support it (or at least use a compatible notification type) - I also use a handful of apps that don't work (most notably those that have persistent notification to keep service alive and just change the content - this will not work with Wear)
2. For me it works flawlessly, but it's possible the watch "misses" a notification for some reason. Some apps also don't vibrate until you dismiss a previous notification from them.
3. Not sure what you mean, but card behaviour depends in part on the watchface you use - try Pujie or Watchmaker, it can be customized on both
4. Yes, this is impossible, the watch will always turn on. Maybe you can try charging it in recovery or bootloader, but that would burn the screen. You can put it in airplane mode while on charge, though. Also, if you have "Mute connected phone" selected, this will be disabled while on the charger, so no need to worry about missing something. Why would you want to do that, anyway?
5. This is normal, there are two modes for watchfaces - the "active" mode where everything is moving and shining, and "ambient" which is a lighter mode to save battery life - you want this mode to light up as few pixels as possible and there are no animations - you want this Avoid watch faces that have thick non-moving elements (like a center of a crown) - best is just a thin font with digital clock.
6&7. I don't use whatsapp, but this mostly depends on whatsapp and less on the watch.
Zviratko said:
....
Click to expand...
Click to collapse
ro_explorer said:
...
Click to expand...
Click to collapse
Hi all,
First of all thank you very much for your answers so far!
1.
@ro_explorer: Yes, thats right, it's mostly whatsapp, but I think I experienced also this problem on e-mails
@Zviratko: I see. But it's very confusing in the first days of using the watch
I uninstalled Mini Launcher for Wear yesterday und now I don't have any missed notifications. Maybe it has something to do with Mini Launcher and Lollipop?
2.
See point 1. After uninstalling it, the watch vibrates as it should.
3.
This is the point I still don't understand. For example on my Samsung Gear 2 a notification stay in fullscreen for 5 seconds and then the watch is shown again and I can see this notification in the notifications tab. It's very random on my LG Watch R, when the notification is being showed in full screen (not a "big" card, it was full screen, like swiping to this card).
But, also here, I never saw a fullscreen notification after uninstalling Mini Launcher?!
4. Now I understand this behavior! In important things like showing notifications the watch seems so stupid but in this case, the watch is very smart. Hurray! :laugh:
5. Okay, I will try watchmaker then, thanks! @ro_explorer
7. I see, that makes sense. Maybe I was just too fast for the watch. By the way: Are the pictures on your watch in good quality @ro_explorer ? Mine are looking like 50x50 pixels or something like this
It's very sad, that the wear system still needs so much to develop. I thought it is stable, like the Gear 2 was (c'mon, it's Samsung, normally they are not the kings in developing..). Hopefully it will change in the next months, when the iwatch arrives the stores. I love the design of the watch and don't want to miss it, but these bugs and problems are driving me crazy :crying:
Hi,
I have just added a "make notifications vibration stronger" feature in last SWApp Launcher Wear version:
https://plus.google.com/+CyrilPreiss0/posts/CUX1DsHCTTw
Hi all,
I've had my Urbane for little over a week now and I'm pretty impressed. Using it for fitness tracking (steps, distance etc) and a for maps / messaging. I've replaced my Xiaomi Mi Band (£16) for this watch but I'm finding the step count to be... inconsistent.
For example. Google Fit on my phone will say 1,500 steps. The Fitness watch face will say 1,640. And Google fit on the watch will say something different too!
The Pujie watch face here https://play.google.com/store/apps/details?id=com.pujie.wristwear.pujieblack&hl=en_GB will also say some random number. Last time I used it, it was over 500 steps ahead of anything else.
They are all supposedly linked to Google Fit (You connect Pujie to fit when you first launch the app) so I don't know how there can be such a huge inconsistency.
Anyone else with experiences like this?
Yup, same here. Pujie's watch face doesn't match Watch Fit's steps and both don't match phone's steps. Holding off on resetting watch and phone.
Same here. Seems wierd.
Mine always shows the phone having a modest bit less than the watch which makes sense if the two are holding separate count as the phone sitting on the counter (at home or work) would not be counting steps while the watch still on your wrist would. For me Pujie can get both more and less than either. Been kinda wondering how that happens when you figure its getting its take from one or the other so it should match one of them.
And one more thing, google fit on watch count steps also without phone connection but after it syncs with the phone the steps on the watch is cleared and replaced with the steps written on the phone.
TheSanitarium said:
And one more thing, google fit on watch count steps also without phone connection but after it syncs with the phone the steps on the watch is cleared and replaced with the steps written on the phone.
Click to expand...
Click to collapse
This. It's garbage.
I leave my phone on my desk at work, and being in IT, I ended up walking all over the building several times a day. And those steps get lost.
I have since done a reset on the watch and the step count is a bit more consistent, but not by much,
Unfortunately this never improved and was a deal breaker for me.
Returned to Amazon for a full refund
I have a strange problem with GW5 sensors: My watch is secured with a PIN and Samsung pay is active. After I register body composition, hearth rate sensor blocks and the security lock doesn't work anymore even if I undress the watch and I put it back on. It stays unlocked. The only way to reset the situation is take a SPO2 measurememt or restart the watch.
Besides, occasionally, the watch locks without any good reason and if I enter the PIN it unlocks only if the screen stays on. When it turns off it locks again.
Somebody else notes this behavior?
I have the 2nd problem you have where the phone locks without any good reason.
Thanks for the answer RigoF. I suspect that the two malfunction are somehow related. Would you mind to make this test:
With the watch working normally take a body composition measurement. Once you get the results, go directly back to the home screen. Undress the watch and check if it locks. If it doesn't work, put it on again and go to the SPO2 widget. Take a measurement of the SPO2 and once you get the results the.watch should start working normally again.
I also noticed that doing this procedure improves the accuracy of the sensors. The other way to solve the issue is restart the watch, but in this case the sensors are not always precise.
Yes I was able to duplicate the behavior you described in post #3. It won't lock after the body composition measurement and returns to normal after the SPO2 measurement.
Thanks a lot. I already spotted this issue in two 5 pro LTE that I had the possibility to use, both brand new and with different CSCs. The BIG message to people that use Sansung pay is: If your watch locks with no good reasons when at your wrist, there is the possibility that everytime you take a body composition measurement your security PIN could malfunction leaving your card accessible even if you undress the watch.
UPDATE. I sent the watch to the Samsung service support. They found that the problem was due to the sensor working intermittently. They changed both the main board and the entire back cover. Now the watch works like a charm.
UPDATE. I sent the watch to the Samsung service support. They found that the problem was due to the sensor working intermittently. They changed both the main board and the entire back cover. Now the watch works like a charm.