ALPHA KERNEL
Praise be to God
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
#include <alpha_std_disclaimer.h>
/*
* i'm not responsible for any dicomfort and hardship faced by you with your phone , by using my works.
*This is purely a development section , great things are made by developing and it surely is a step by step
*process. If you dont like it , i'm aint forcing to install it on your device
*/
Here are the compileable sources :
https://github.com/goutamniwas/android_kernel_motorola_msm8610
-config = cm_condor_defconfig , source contains boot image pack tools ,branch =lollipop
Download ALPHA Kernel 2.0.3 (lollipop)-stable
Features :
(use Trickster mod kernel to avail some of the features)
-TAP2UNLOCK V3.0
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
- Ram OC to 400mhz from 333mhz and UV upto 50mhz
-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
-Vibrator intensity control (a little bit over volt)
-Alpha governor, intellidemand, intelliactive governor tweaked for moto E.
-exFat ,NTFS , f2fs support.
-little improvements in sound
-zRAM
-dtw/s2w/s2s (fully working )
-cpu-boost
-Quickwake
-Ksm -enabled
-Optimized linaro 4.9(2014.10)
-linux version 3.4.106
-updated wifi prima drivers to v3.2.3.172 thanks to [email protected]
-frandom
-sysfs to disable kernel logging
-And all other that usual cm kernels include and some minor improvements
Instructions :
For T2U :
tap your pattern 1 2 3 4 in the switched off screen (click - you must read this)
1 | 2
-------
3 | 4
-opening it with powerbutton will show u a t2u lockscreen
-You can either input with screen off or on
-You definitely need the app provided for tap2unlock in post no. 2 for version 1.1.0 t2u fix needs 0.6 app from second post
Keeping dt2w/t2u/s2w on may cause sometimes the touch screen to freeze . otherwise there is no freezes
If ur lazy enough to turn ur d2w off during nights like me , keep ur phone facedown during nights for battery's sake
Never turn off intelli plug
Just flash it via a custom recovery.
Do a wipe . Sometimes it gets unstable without a wipe
flash on any kk rom-cm based ,aosp ?(need report)
Bugs :
Tell me if any ...
Any help with the source is welcomed
FAQ :
You pay me nothing
feature ? request it
problem? report it(with logcat)
got a solution? help us out
wanna shout? get out
dont like the features? use some other kernel or request
Credits :
Linux for its open source kernel
Kernel.org for the linux update patches.
percy-g2 and scritch007 for his cm kernel source .
xperiafan for flashable zip help for lollipop.
ashwin007 for some considerable work on cm12 sources.
[email protected]/[email protected] for his open projects.(whenever i have problem i go to his threads)
[email protected] (for his open projects)
savoca for porting sound control to msm8610 and his awesome lcd kcal
faux123 for almost every feature in the kernel thats implemented by him.
[email protected] for usb mouse keyboard.
-
Developing a custom kernel requires high commitment and hardwork , if not a donation , press thanks ,that encourages
XDA:DevDB Information
ALPHA Kernel, Kernel for the Moto E
Contributors
goutamniwas, Savoca,Teammex,BrateloSlava,showp-1984
Source Code: https://github.com/goutamniwas/android_kernel_motorola_msm8610
Kernel Special Features: T2U,Intelli plug,Intelli thermal , Ram oc , DTW/s2w ,Alpha governor , CPU underclock .
Version Information
Status: Stable
Current Stable Version: v 1.0.2
Stable Release Date: 2014-12-14
Created 2014-11-12
Last Updated 2014-12-18
XDA:DevDB Information
ALPHA Kernel, Kernel for the Moto E
Contributors
goutamniwas, Percy-g2,Savoca,Teammex,BrateloSlava,showp-1984
Source Code: https://github.com/goutamniwas/android_kernel_motorola_msm8610
Kernel Special Features: T2U,Intelli plug,Intelli thermal , Ram oc , DTW/s2w ,Alpha governor , CPU underclock .
Version Information
Status: No Longer Updated
Current Stable Version: v 2.0.3
Stable Release Date: 2015-03-15
Created 2014-11-12
Last Updated 2015-04-26
Reserved
Application for T2u control : (current version is 0.5)
You need 0.6 app for alpha kernel v1.1.0
Click here
The applications is updated to v 0.6
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video description : for tap 2 unlock v1.0 only you need the application for above versions
Changelogs
https://github.com/goutamniwas/android_kernel_motorola_msm8610/commits/lollipop
or
Code:
version 2.0.3
-Update linux kernel version to 3.4.106
-Implement motorola's lollipop changes for F2FS
version 2.0.2
-Fix screen freeze atleast for non uers of screen wake features like t2u,dt2w,s2w(need report)
-attempts to fix screen freezes on the whole
version 2.0.1
-Fix auto rotation
version 2.0
-lollipop support (Thanks to percy and scritch 007)
version 1.1.0
-Reclaim some RAM from loggers
-Try fixing intellidemand
-Merge lots of commits from percy-g2
-Including lcd kcal (untested) - many thanks to [email protected]
-Increase battery level check interval.
-Make lzo compression very fast with unaligned access
-Make btrfs and ext4 partition much faster by making context readahead more conservative
-Suspend: enable freeze timeout configuration through sysfs (faster deep sleep)
-int_sqrt: Improve 3x faster integer sqrt. (faster cpu computations)
-Update t2u version to 3.0 stable (t2u is stable , reliable and secure now)
version 1.0.2 t2u fix
-Fix t2u switch not standing after boot(to me it does -need report)
-Now no touch freeze during incoming or outgoing calls whatsoever
version 1.0.2
-All changes of t2u v2.0
-T2u app updated for t2u 2.0
-Incoming call is now allowed without entering pin
vesion 1.0.1
-make t2u absolutely flawless with better algorithm
-t2u now checks the time gap btw 2 knocks (max = 0.6s)
-fix the init.d not working problem (check if the init.d/77AlphakernelConf has rwx-rx-rx and user root group shell)
-fix the autorotate bug caused by 1.0
version 1.0
-New Tap2Unlock 1.0(wip)( http://forum.xda-developers.com/android/software-hacking/kernel-tap2unlock-tap2wake-feature-t2965344)
-upgrade linux to 3.4.105
-fix force usb fast charge
-working init.d script to set default settings on boot time (init.d/77AlphakernelConf)
version 1.0 prerelease
-Allow aac audio recording at 320 kbps
-Video recording to 960x540(24fps ) bit rate increased(no way related to kernel alone)+audio rec aac format(256kbps)(kernel oriented)
-power efficient workqueues
-exFat and NTFS support
-Implement intelliactive governor
-Remove usage of swp which is deprecated
-Fix some warnings
-D2w is disabled by default
-Mp-decisions is removed
version 0.9
-compile with linaro 4.9(2014.10)
-Implement Intellidemand 5.5 governor replacing the buggy ondemand and make it appropriate for moto e
-Ability to use the phone as keyboard or mouse
-Implement Usb Force Fast charge
-lowmemory killer moves to kill the next task when sigkill takes time instead of killing the same
process over and over
-Implement powersuspend in wlan also
-Some code structure improvements in ext4 (refer gits)
version 0.8
-Backport 'random' updates from kernel 3.13 rc1
-Added frandom support
-Use more random in hwrng
-Pulled some lollipop references from percy-g2
-More efforts on power conservation
-Sysfs to disable logging
version 0.7(big update)
-linux version 3.4.104 patch from kernel.org
-updated wifi prima drivers to v3.2.3.172 thanks to [email protected]
version 0.6
-Fix intelli plug update it to 3.8 (Thanks to [email protected] and [email protected])
(this also seems to have fixed the screen freeze issue during wakeup -to my knowledge)
version 0.5
-Intelli hot plug v.3.7 for better battery performance
-Ksm enabled
-sysfs for zRam added
version 0.4
-Add Intelli thermal v2 as thermal manager instead of msm thermal manager.
-Added Alpha governor based on smartass v2.
-Added Interactive,performance gov back.
-Implement support for Sound control v3.4
-Make some frequencies of gpu and ram to right values
-Remove unwanted led flash drivers
-gpu freq oc changed to 450mhz
-Enable Quickwake
version 0.3
-fixed auto rotate
version 0.2
-fixed dtw/s2w completely
is this limited to cm11 only???
AshuGite said:
is this limited to cm11 only???
Click to expand...
Click to collapse
Dont have aosp , theoretically it should work , u can try and report
goutamniwas said:
Dont have aosp , theoretically it should work , u can try and report
Click to expand...
Click to collapse
AshuGite said:
is this limited to cm11 only???
Click to expand...
Click to collapse
If percy's tree was used as base.....it will surely work.....btw good work
Is this work on carbon rom...
Sent from my XT1022 using XDA Premium 4 mobile app
goutamniwas said:
Dont have aosp , theoretically it should work , u can try and report
Click to expand...
Click to collapse
WiFi driver is not working..
AshuGite said:
WiFi driver is not working..
Click to expand...
Click to collapse
I see it working , what do u mean by wifi driver ? i could use hotspot
goutamniwas said:
I see it working , what do u mean by wifi driver ? i could use hotspot
Click to expand...
Click to collapse
sorry my mistake I meant in the stock earlier it wasn't mentioned cm kernel only... in cm its working but custom setting do not stick after reboot also interactive governer is missing...
AshuGite said:
sorry my mistake I meant in the stock earlier it wasn't mentioned cm kernel only... in cm its working but custom setting do not stick after reboot also interactive governer is missing...
Click to expand...
Click to collapse
custom settings need to be reapplied after every boot.
goutamniwas said:
ALPHA KERNEL
Praise be to God
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here are the compileable sources :
https://github.com/goutamniwas/android_kernel_motorola_msm8610
-config = cm_condor_defconfig , source contains boot image pack tools
ALPHA 0.1 Flashable zip download
Features :(use Trickster mod kernel to avail some of the features)
- Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
-cpu underclock upto 91mhz (good battery life)
-vibrator intensity control (a little bit over volt)
-little improvements in sound
-zRAM
-s2s (works well)
-dtw/s2w (wip)
-Optimized linaro 4.9
-And all other that usual cm kernels include and some minor improvements
Instructions :
Just flash it via a custom recovery.
Do a wipe . Sometimes it gets unstable without a wipe
flash on any kk rom-cm based ,aosp ?(need report)
Bugs :
s2w/dtw is a wip , its working but sometimes not
Any help with the source is welcomed
FAQ :
You pay me nothing
feature ? request it
problem? report it(with logcat)
got a solution? help us out
wanna shout? get out
dont like the features? use some other kernel or request
Credits :
percy-g2 for his cm kernel source
-
Click to expand...
Click to collapse
can you make to stock 4.4?
(Sorry my bad english im from Brazil)
Sent from my Moto E using tapatalk
DAVI FELICIANO said:
can you make to stock 4.4?
(Sorry my bad english im from Brazil)
Sent from my Moto E using tapatalk
Click to expand...
Click to collapse
Never reply the entire OP, please.
Now, to use this post: If I install the custom kernel, see a error or bug, how do I remove/revert back? There are any place with the stock/original kernel?
marceloterorist said:
Never reply the entire OP, please.
Now, to use this post: If I install the custom kernel, see a error or bug, how do I remove/revert back? There are any place with the stock/original kernel?
Click to expand...
Click to collapse
Before you install it make a backup of your current boot IMG in recovery and when you want to revert to old one just restore it.
Sent from my XT1022 using XDA Free mobile app
---------- Post added at 04:35 AM ---------- Previous post was at 03:48 AM ----------
Test results when flashed on cr droid fresh install, moto e xt1022
Sweep to wake,Double tap to wake sometimes works and sometimes does not as said by op
Auto rotate not working
WiFi works fine no problems
Bluetooth,Mobile network works fine
90mhz working
Logs---> http://d-h.st/Lln
Thanks
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
@SidDev said:
custom settings need to be reapplied after every boot.
Click to expand...
Click to collapse
No need to reapply after every boot , in trickster mod set it on boot and it will be automatically applied on boot
updated
s2w/dtw fully fixed
s2w/dtw works well with pac now.
goutamniwas said:
s2w/dtw fully fixed
Click to expand...
Click to collapse
Thanks for the fix and is auto rotate bug fixed?
Prashanth Meesara: said:
Thanks for the fix and is auto rotate bug fixed?
Click to expand...
Click to collapse
no not yet...
AshuGite said:
no not yet...
Click to expand...
Click to collapse
Okay , thanks for reply
Sent from my XT1022 using XDA Free mobile app
update
auto rotate fixed
for developers :
if u use my repo
add in ramdisk to init.rc
Code:
chown system system /sys/class/input/event3/device/device/enable
There wasnt enough permission set for auto rotate to be enabled
Related
*** NOTE: All kernels are now officially end-of-life (EOL).
Please do not expect any more updates for them in future, no maintenance and no bugfixing. ***
Hi all,
this is the thread about the well-known Boeffla-Kernel for the Samsung Galaxy S3 international.
Compatibility
Important: This kernel is only meant to be compatible with official Samsung Stock firmware and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Notes:
Never install it on CM or AOSP based roms!!!
Kernel version 5.x are only for Samsung based Jelly Bean 4.3.x roms!!!
Kernel version 6.x is only for ported Samsung based Kitkat 4.4.2 roms (e.g. Archiport) !!!
Kernel version 7.x is only for ported Samsung based Kitkat 4.4.4 roms (e.g. back-to-n00t) !!!
Kernel versions 1-4 are only for Samsung based Jelly Bean 4.1.x roms!!! (no development anymore)
For the CM Boeffla-Kernel, please go HERE.
If you have questions to settings, presets, others configuration and wanna share your configuration, head over to the unofficial Boeffla-Config App Config sharing thread:
http://forum.xda-developers.com/showthread.php?t=2621308
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app.
Click here to learn about using the config app.
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for Android 4.3 kernels: KLICK HERE
Change log for Android 4.4.2 kernels: KLICK HERE
Change log for Android 4.4.4 kernels: KLICK HERE
Features
* To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from here: DOWNLOAD
* Upstreamed to Linux 3.0.101 (www.kernel.org)
* Based on Samsung source code GT-I9300_JB_Opensource_Update13
* Initramfs from xxugml2 kernel
* CPU "soft" overclocking to 1500 or 1600 MHz
* CPU undervolting interface
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Configurable zRam (Turbo zRam with up to 4 devices)
* Configurable touch-to-wake
* Configurable touch boost frequency
* Configurable early suspend time (for screen off animations, 100ms default)
* Configurable LED for fading mode, speed and brightness
* Configurable charger rate for AC, USB and wireless (default increased to 1100 mA for ac charging)
* Charging logic supports ignore unstable power and remove safety margin
* Charge information display support via Boeffla-Config V2 app
* Boeffla-Sound engine V1.6.5 to unleash the power of the Galaxy S3 audio chip
* Additional governors: zzmoove 0.7d, pegasusqplus, smartassv2 and lulzactiveq
* Governor profiles for pegasusq, pegasusqplus and zzmoove for performance, battery saving etc.
* Additional schedulers: ROW, ZEN, BFQ (v6r2) and SIO
* Schedulers configurable separate for internal and external SD memory
* Hardcore speedmod sharpness fix implemented (default is off)
* Black crush fix for better balanced display
* SD card read ahead buffer configurable separate for internal and external SD memory (default increased to 256 kB)
* Ext4 File system tweaks (default to on, can be disabled)
* System Tweaks predefined supported (default is off, new Mattiadj tweak set included)
* WIFI Multicast filter for better battery life
* WIFI wakelock times reduction
* Proportional rate reduction for TCP
* TCP congestion changed from Cubic to Westwood
* Wifi mac address change support
* Dynamic fsync 1.2 implemented
* Timeout for external SD card changed to improve handling of crappy SD cards
* Custom boot animation support
* Swap supported (but not recommended, use zRam instead)
* init.d support (in /system/etc/init.d - set correct permissions!)
* exFat opensource (Samsung OSRC) instead of proprietory modules
* NTFS (read-only access only!) compiled as a module
* CIFS compiled as a module
* NFS compiled as a module
* XBox controller support as module
* exFat support switchable (switch it off if you do not need it)
* Battery monitor wakelocks reduced
* Kernel can root if required (create file "autoroot" on internal sd and reboot)
* Android logger can be disabled
* Kernel logger can be disabled
* Disabled various debug logs and traces
* Frandom compiled as a module (for mods like Crossbreeder)
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback) - now compatible with tools like kTool
* Kernel initialisation log file (with history of 3 log files)
* Exynos vulnerability and sudden dead issue fixed
* Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* EFS V1 modem supported (also on Android 4.3)
* Compiled with Google arm 4.7 toolchain
* Internal kernel busybox version 1.21.1
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History
Basically I created Boeffla-Kernel as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
This said, I will definitely NEVER implement:
dual boot (I do not need it)
color "calibration" (I do not like it, but I like the crispy stock colours)
real hard overclocking higher than 1600 MHz as this is outside of Exynos specs
f2fs - it is known to cause various issues and compatibility problems
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it. Everything else I am happy to check and decide.
Compatibility
To reiterate it again: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) firmwares. It is not designed to run on AOSP based roms!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
Donation
If you like my work, feel free to donate: Donation-Link
You will receive a personal donation code which unlocks some nice comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* Yank555
* ZaneZam
* Hardcore
* Chainfire
* Harunjo
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Supercurio
* Mialwe
* Entropy512
* Faux
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
reserved1
--- reserved for future usage ---
reserved2
--- reserved for future usage 2 ---
nice new kernel good luck
Sounds very promising. Glad to see some people will keep their s3. Sending u a beer soon installing now
Ps. Fix the links
Sent from my GT-I9300 using Tapatalk 2
This is weird. I just tried on PC and Phone, both working for me...
Can you maybe try again? What browser are you using?
Cheers
Andi
Jack Barrett said:
Sounds very promising. Glad to see some people will keep their s3. Sending u a beer soon installing now
Ps. Fix the links. Redirects to downloading html page.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Tried stock & chrome. Downloads html page (same page)
Sent from my GT-I9300 using Tapatalk 2
Very weird, but ok. As a quick fix I will upload the kernel to the OP now.
Stay tuned, you will find in a vew minutes.
Thanks
Andi
Jack Barrett said:
Tried stock & chrome. Downloads html page (same page)
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I had no problem getting into your homepage or dl both kernel and cleaner script..
Will flash your kernel tomorrow..
Anyway welcome to gs3
Downloaded via PC. 5 min on it and I love it. Keyboard seems faster than before. Cleaned RAM twice, no redraw. Maybe launcher is locked in memory?
Here's your beer. Cheers and best of luck!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9300 using Tapatalk 2
Download links now avaialbe in OP
EDIT: Have done some setting changes to the homepage, it should be working now also from your mobile devices. If not, please PM me...
For all those having trouble to download from the homepage to the mobile device: I have temporarily added download links into the OP as well.
Sorry for the inconvenience.
Thanks
Andi
i m testing this kernel since first betas quietly with my rom builds and i can say nothing but only best words.
This is the best kernel i ve ever had.
I m not going to say that other kernels are bad, not at all.
But for me stability and dailly use comes first and i cannot see lag anywhere......everything seems fast and it dont need overclock for sure....it is perfect out of the box
testing now and will announce the results after !
This is nice....
) ) ) over the air on Galaxy SIII ( ( (
sotmax said:
i m testing this kernel since first betas quietly with my rom builds and i can say nothing but only best words.
This is the best kernel i ve ever had.
I m not going to say that other kernels are bad, not at all.
But for me stability and dailly use comes first and i cannot see lag anywhere......everything seems fast and it dont need overclock for sure....it is perfect out of the box
Click to expand...
Click to collapse
I am also testing it till beta. I know for sure that this Kernel for me is the BEST. Very Smooth ,no lags..
Thank you Andi
This looks great man!
Nice to see new kernels here...
Is there a possibility to add cpu/gpu oc mate?
Thank you for contributing to the community.
Cheers,George.
nfsmw_gr said:
This looks great man!
Nice to see new kernels here...
Is there a possibility to add cpu/gpu oc mate?
Thank you for contributing to the community.
Cheers,George.
Click to expand...
Click to collapse
You need to read the first post about OC
good luck mate will test it
Exactly... OC is really not on my roadmap for the time being.
I see not a big point in it, the device is also fast enough for daily usage without OC.
But if you insinst on OC, there are plenty of other absolutely great kernels around for it
Thanks
Andi
efegue said:
You need to read the first post about OC
Click to expand...
Click to collapse
Download from homepage now working fine
Hi,
just a small update on the download issue from the homepage yesterday:
I completely swapped out the old download component in the CMS and replaced it by a different one. Now it has been confirmed (Thanks to Jack Barrett) to be working fine.
By the way - there is a known issue with auto root reported (in both 1.0 and 2.0-beta1 versions), I am currently working on it and expect a new beta version very soon.
Cheers
Andi
CyanogenMod 10.1.2 Jellybean 4.2.2 - KANG
CyanogenMod is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, an enhanced reboot menu, support for Wi-Fi, Bluetooth, and USB tethering, CPU overclocking and other performance enhancements, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as wi-fi, Bluetooth and GPS), app permissions management, as well as other interface enhancements. CyanogenMod does not contain spyware or bloatware. In many cases, CyanogenMod may increase performance and reliability compared with official firmware releases.
Source: CyanogenMod Wiki
Screenshots
Installation Instructions
Requirements
* Rooted (obviously)
* A brain
Installation
1: If you are coming from another ROM do a full wipe
1a: if this is just an update to THIS ROM BASE you can simply wipe cache and dalvik cache
1b: if your device is S-ON you must flash your boot.img either with fastboot or some type of GUI program EVERY FLASH (google is your friend)
2: Flash gapps (download below)
3: Reboot
4: Enjoy CyanogenMod 10.1
Please read the whole post for changelog, Download links, and other important info
Updates:: First build since initial release, mainly cosmentic changes. although a couple important fixes. Anyways please take the time to read the whole post, as well as post #2
. As always: remember it takes a FULL charge from AC, and a full discharge then re charge batteryt to be accurate. Also leave it plugged in for up to an hour at 100%, Another thing i find helps battery life is to make custom auto-adjustment values if you use auto-brightness. Check below for full changelog Feedback always welcome Please read the Kernel section for more info and full config options for the kernel.
Albinoman887
Working
SMS/MMS
Wi-FI
Data
GPS
Audio
Radio
Camera
Google Now
Internal/External SD card
Bluetooth
H/W Accelerated Video Playback
Native Wi-Fi Tethering
1080p Video Recording
Not Working
????????????
Changelog
Aug-19
* Here is a test CM-10.2 build. please post your results. if they are good i will open a new thread...
Aug-6
* Synced with upstream
* Kernel updated to Linux 3.0.85
* One more go at the low mic in call issue
* Build is now on a new super fast server. i will still use goo.im due to the OTA update function but the new server will be the main download link
July-23
* Fixed a few rare graphical glitches (no not with Maps 7)
* Any and all upstream changes at time of compile
* Disabled Sweep2wake since it doesnt work (it does on pyramid and shooter so will revisit this bug one day)
July-15
* CM tagged 10.1.2 (security fixes)
* 2nd go at fixing sim card message
* Fixed torch turning off with screen
* Fixed soft reboots!!
* Enabled FauxSound
* General cleanup
* Any upstream updaes to CM at time of compile
July-2
* Fixed all the issues with the last release and black screen
* Really fixed video recording - NOTE!: if dirty flashing you must clear data and cache of Gallery app
* Kernel: Enabled mpdecision (I forgot)
* Fixed "SIM card inserted" message on boot
* Fixed issue where some people had to toggle airplane mode to get service
* General cleanup of code, seems more stable
* Kernel: Changed version string to ChronicKernel to conform with my pyramid/GS4/glacier kernels
* Added qcom-post-boot service to startup (was missing)
* Upstream CM Changes
June-30
* Fixed Low volume
* Fixed LED flashlight toggle not being selectable for notification drawer
* Fixed Video recording
* Fixed Dock options not showing in settings
* Fixed volume rocker wake not showing in settings
* Fixed issue with soft-reboots during heavy usage
* Added init script for configuring some kernel settings (GPU OC, fsync, etc) (located:/system/etc/init.d/99kernel)
* Set min CPU freq to 384mhz like on other msm8660 devices (192mhz is a buggy freq)
* Fixed big margins on homescreens with trebuchet after clean install
* Upstream CM changes
June-29 - initial build
notable changes since cm10
* Kernel: GPU drivers updated to jb-chocolate from CAF
* Kernel: Genlock updated to jb-chocolate from CAF
* Kernel: vidc updated to jb-chocolate from CAF
* Kernel compiled with linaro and -o3 optimizations
* Kernel: updated to Linux 3.0.80
* All issues from development builds squashed
Kernel
ChronicKernel
* Compiled with linaro
* Set flash to disable if battery is below 10% to prevent the random shut-off when taking a pic
* Removed/Disabled KSM
* Removed ZRAM
* User-configurable GPU OC (Not OC'd by default)
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* Reverted CRT hack to smooth animation in Android 4.2.2
* Increased PMEM_MDP as it is needed in Android 4.2.2 to fix soft-reboots
* PM_FAST enabled by default (high power wi-fi when screen is off)
These settings were changed by me to help make the kernel more stable with our ROM, observed with tests by me. If you want more features of the Sultan kernel feel free to flash it, but support will not be provided in this thread.
Other Features of the kernel include:
* OC to 1866Mhtz (default 1566Mhtz)
* Undervolted
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = SIO)
* User-configurable badass gonvernor (default = balanced)
* Sweep2Wake
You can edit many of the settings in /system/etc/init.d/99kernel, here is a snippet of the script with all the config options
Kernel init script: Click Show Content to expand
Code:
#Script originally made by Axetilen. Modified by Sultan (android1234567)
#Updated for albinoman887's ChronicKernel (98% of the credit goes to android1234567. Thanks so much man :)
# Configure your options here #
# Config default CPU Gonvernor (Disabled by default: When disabled uses internal Kernel setting)
# For better battery life switch to badass
# Kernel Default: ondemand
# Possible values
# badass
# ondemand
# interactive
#= lagfee
# performance
GOV=ondemand;
# Config I/O scheduler
# deadline
# cfq
# noop
# vr
# sio (default)
IO=sio;
# Config CPU max frequency
# Default: 1566000 (1566Mhtz)
# Overclockable to - 1836000 (1836Mhtz)
# for badass set to 1566mhtz (best performance/battery life)
MAXFREQ=1566000;
# Config CPU min frequency
# Default: 384000 (384Mhtz)
# Range 384000 - 1944000 (384Mhtz - 1944Mhtz)
MINFREQ=384000;
# Config 3D GPU clock
# 228571000 = 228mhz
# 266667000 = 267mhz (default)
# 300000000 = 300mhz (Recomended For balance of Performance and Battery life)
# 320000000 = 320mhz
GPU=266667000;
# Config 2D GPU clock
# 145455000 = 145mhz
# 160000000 = 160mhz
# 200000000 = 200mhz (default)
# 228571000 = 228mhz (Recomended For balance of Performance and Battery life)
# 266667000 = 267mhz
DD=200000000;
# Badass
# possible values
# 1 = performance
# 2 = balanced
# 3 = battery saving
BADASS=2
# Enable Sweep2Wake
# 0 = disabled (default)
# 1 = enabled
# 2 = enabled (with no button backlight during sweep)
SWEEP=0
# Enable Fastcharge
# 0 = disabled
# 1 = substitute AC to USB charging always
# 2 = substitute AC to USB charging only if there is no USB peripheral detected
FASTCHARGE=0;
# Fsync Control
# Disabled by default (recomended)
# 2 = Fsync disabled
# 1 = Fsync enabled
FSYNC=2;
# TUN
# Disabled by default
# 0 = Disabled
# 1 = Enabled
TUN=0
# End of configurable options #
Please note this is not the full script just a small portion, Check /system/etc/init.d/99kernel for the full script
Bugs
* MHL doesn't work
* Sweep2wake sometimes causes issues with the proximity sensor during calls
Notes
Most vivid users are S-ON, if you don't know what this is you are. This means you must flash the boot.img EVERY FLASH either with fastboot or similar, if you fail to do this you WILL have problems, including broken wifi and instability
* As of Feb-19 CyanognMod changed the way the reboot menu works. To enable the "Advanced Reboot" menu with recovery and bootloader go to Settings>Developer Options and Check Advanced Reboot
* As of AOSP 4.2.2 ADB now has a whitelist feature. On first connect with adb it will say device offline You need to update your ADB then with the phone connected. Disable and Re-Enable Android Debugging in the Developer Options menu. It will ask if you want to accept and show the PC's RSA key. Select Yes and it will now work as expected
* If your homescreen does not look right (big margins) go to System Settings>Launcher>homescreen[/B] click Stretch screens. Then choose grid size and set rows to 5.
* As of AOSP 4.2.1 Developer Options and Performance setting menu options are hidden until you go into about phone and tap build number repeatedly (aprox. 6 times) this only needs to be done once
* If you are having a lot of soft reboots when waking the device set you min CPU freq. to 384htz in Performance settings. (What? no Performance settings? ummm look up hehe)
* If you are coming from another ROM i highly recommend you perform and Wipe Date/Factory Reset in recovery menu when applying this ROM.
* The gapps linked to does not have photosphere. As far as i know it's not supposed to. If you want photophere search for the flashable zip
* If you can't get MMS to work. Send yourself a MMS. or just wait a day. eventually they will work again
* For the best battery life I suggest the stock settings with the exception of the ONDEMAND governor. Switching to BADASS will yield best battery results
DOWNLOAD
ROM : cm-10.1-20130806-Albinoman887-holiday.zip
Gapps : gapps-jb-20130301-signed.zip
Goo.im Repo : CLICK HERE
* This ROM can also be downloaded directly with GooManager *
Source Code
Team Hydra Github (main): https://github.com/Team-Hydra
CyanogenMod Github: https://github.com/CyanogenMod
Credits
* android1234567 for getting this porting project going, it was a joint effort between us to get this going
* billibox for his relentless testing
* of course cyanogen, the CyanogenMod project and all who contribute.
* Bruce2728 for doing all the leg-work originally to get get CM-10 on our Sensation, most of which was used for CM-10.1
* Evervolv Team for their device tree. This was largely what was needed to get the build going.
* mikez for all his work on the Evervolv/pyramid tree.
* NLJ for making the diff patch of Evervolv's frameworks_av repo to get camera working
* jiggs82 for all his helpful hints.
* And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
* dastin1015 for answering all my n00bish questions, and providing helpful hints and solutions
* android1234567 for all the help with the kernel, without you we wouldn't have new kernel
* tarfu for fixing camera p2z
* blahb14hblah for his hint to the extra scrolling tweak in frameworks/base
* NLJ for fixing the Sweep2Wake proximity sensor issue
* Skipjacks for maintaining the Q&A thread
* A bunch of thanks to arco, for all his updates to our kernel, our display libs, our media libs, and for fixing the video playback glitching, and for being a good friend and dev mentor.
Donations
I really didn't want to do this but people keep asking so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the paypal account may say patricia, this is because it's a family paypal account.
For more information, like kernel info (and possibly newer kernel builds) from our kernel chef android1234567 read the 2nd post
Happy Flashing
Albinoman887
Reserved
Reserved for future kernel fun
Awesome job guys, it was great to see this in development and finally finished. And THANK YOU for the DevHost mirror, its way faster than too... I'm getting between 5-10Mb/s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my CyanogenMod Vivid using Tapatalk 4
Hey I'm downloading it right now and I'm wondering if the ROM still has low call volume problems?
Wooow, I really thought this phone had no more hope (excluding the dev thread). And here it is...nice work everyone that put in the time. We all GREATLY appreciate it.
Time to test this out and report some bugs.
Thank you again!!!
HTC_Vivid said:
Hey I'm downloading it right now and I'm wondering if the ROM still has low call volume problems?
Click to expand...
Click to collapse
Seems like I can barley hear voicemail so I would say yes...
I'm assuming that's being dealt with in those kernel changes that were hinted about in the OP. Can't wait to test this out.
switchy85 said:
I'm assuming that's being dealt with in those kernel changes that were hinted about in the OP. Can't wait to test this out.
Click to expand...
Click to collapse
It hasn't been fixed the entire time CM10 has been out... So if these guys find a fix I would be amazed!
switchy85 said:
I'm assuming that's being dealt with in those kernel changes that were hinted about in the OP. Can't wait to test this out.
Click to expand...
Click to collapse
Don't get your hopes up I've already tried fixing it many times in the kernel without any luck.
Excellent news! Going to bed to word of "I don't know what else to try" and waking up to a new thread and a fully functional ROM!!!
May I be so bold and ask what the last missing but was for getting WiFi working?
Big thanks in any case to all, known and unknown, that participated so far.
François
frankieGom said:
Excellent news! Going to bed to word of "I don't know what else to try" and waking up to a new thread and a fully functional ROM!!!
May I be sobold and ask what the last missing but was for getting WiFi working?
Big thanks in any case to all, known and unknown, that participated so far.
François
Click to expand...
Click to collapse
Some firmware was missing for it. As far as I know.
bilibox said:
Some firmware was missing for it. As far as I know.
Click to expand...
Click to collapse
Thanks
Well flashed it on my phone and it is awesome. Get ready for the flood of 4.2 ported roms. Already working on two rom ports from the HTC Sensation just need to finalize and get permission from the devs hopefully will have booting roms up by Friday as I am going on a holiday.
Sent from my HTC One using Tapatalk 4
After some quick initial testing, it appears everything in OP WORKING list, WORKS .
Data, SD, Wifi, Sound, and more. Seems VERY snappy too. Ohh some really good work
Thanks guys for your great work :thumbup:
One question 1080p video can be played with hardware playback ? Cm10 can't do this
Sent from my HTC Holiday using xda app-developers app
Only bug that I find is that it takes quite a long time to wake up the screen compared to cm10.
Sent from my HTC One using Tapatalk 4
Since this is 4.2.2, will BaNkS Gapps will work OK?
Sent from my Vivid 4G using Tapatalk 2
Can't wait to flash
Sent from my Vivid 4G using xda premium
bruce7373 said:
Since this is 4.2.2, will BaNkS Gapps will work OK?
To answer myself: yes, so far so good.
Click to expand...
Click to collapse
I see there's still the issue of CM not mounting the external sdcard when USB connected that exists with CM 10. I was hoping things would be different with 4.2.2, but apparently not. The workaround is to go into Recovery and mount it there, then connect. So this must be a CM issue, since the problem doesn't exist with PAC (4.1.2). Or maybe how CM works with the Vivid. Anyone have any idea?
Sent from my Nexus 10 using Tapatalk HD
★★★BlackBox-Kernel★★★
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Kernel Is Based Off Latest Sources From Google! This Kernel Has Been Made To Balance Perfectly Between Performance And Battery Backup. This Kernel Will Get Updates Periodically And Will Get Updated With New Features On Every Update. This Kernel Is Made For Android One Devices Running 5.1 Stock ROM and Also CM-12.1 Custom ROM. And Will Also Be Compatible With Any Other CM Compatible ROM's
Features :
init.d support
Always Updated Linux Kernel
Tap2Wake And Sweep2Wake Functionality
Various Patches to mm, idleslee
Added Various I/O Tweaks *new
Tweaks For Better Battery (smp.c) *new
Compiled With Linaro 4.9.3
Dirty Ratio Tweaks
Disabled noatime and nodiratime
Added Dynamic FSync (Thanks To @faux123)
Multicore Scheduler Support
IO BlockPlugs Removed For Performance Improvements
Network Tweaks For Lower Ping And Higher Output Speeds
MMC: disable crc check for 30% extra performance
Mali GPU cache Optimizations And Various GPU Tweaks
Optimized Various Files
IO Scheduler Added : ROW
Incompatibility Issues Fixed
Added Block Patches!
Reduced Cache Pressure
GFS Sleepers Disabled
Governer : InteractivePlus, Interactive, Conservative, On Demand, UserSpace, PowerSave, HotPlug, Performance.
And Various New. Check Changelog Below
Flashing Instructions :
Download The Zip File.
Copy To SD Card & Enter Recovery.
Flash The Kernel And That Will Be it!
Download : Downloads Here
XDA:DevDB Information
[KERNEL][LP][3.10.80+] ★BlackBox-Kernel-9.0★ [SPROUT], Kernel for the OEM Cross Device Development
Contributors
Kunal.Kene.1797
Source Code: https://github.com/BlackBox-Kernel/blackbox_sprout
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: LP-9.0
Stable Release Date: 2015-06-13
Created 2015-04-09
Last Updated 2015-06-13
To do list and changelog will be added here!
ChangeLog :-
$$ Twelfth Major Update Release(13/6/15) $$
-Kernel Version Updated to 3.10.80 From 3.10.79.
-Added Tap2Wake And Sweep2Wake | Enabled T2W_only by Default. thanks to @thwisenerd
-Governor Reboots Fixed.
-Various cpuIdle Patches/Tweaks.
-Workqueue, mm and memblock and power patches.
-Various other patches for kernel (as linux kernel updated to 3.10.80).
$$ Eleventh Minor Update Release(18/5/15) $$
-Kernel Version Updated to 3.10.79 From 3.10.78.
-Now Optimized for CM12.1 Beta 4 and further official releases.
-Fixed All The Governors Efficiently (Reboot Issue Fixed) (Thanks to @intersectRaven for the patch)
-Selinux mode set to Permissive from Disabled Previously.
-various new patches for kernel (as linux kernel updated to 3.10.79 Stable Release)
-and several tweaks check sources for the same...
$$ Tenth Successful Release(18/5/15) $$
-Kernel Version Updated to 3.10.78 From 3.10.77.
-ASoC: compress: Use power efficient workqueue
-ASoC: jack: Use power efficient workqueue
-regulator: core: Use the power efficient workqueue for delayed powerdown
-ASoC: pcm: Use the power efficient workqueue for delayed powerdown
-fbcon: queue work on power efficient wq
-block: queue work on power efficient wq
-PHYLIB: queue work on system_power_efficient_wq
-workqueue: Add system wide power_efficient workqueues
-workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented …
-various new patches for kernel (as linux kernel updated to .78)
-and several tweaks check sources for the same...
.
$$ Ninth Release(12/5/15) $$
-Kernel Has Been Updated to 3.10.77+
-ThunderQuake Engine Added (Viberation Intensity). thanks to @varunchitre.15
-Native NTFS Support Added.
-EnabledZSWAP, FRONTSWAP, VNSWAP and disabled ZRAM.
-Power: make sync on suspend optional.
-Hotplug optimizations.
-Cpufreq: Introduce new relation for freq selection.
-Various other minor patches check source for the same....
$$ Eihth Release(8/5/15) $$
-Add frandom(/dev/frandom) -Fast kernel number generator.
-Remove '+' symbol from kernel version string.
-block: sysfs: allow non superusers to change i/o scheduler.
-Compiled with linaro 4.9.3.
-Enabled Interactive Governor.
$$ Seventh Release(5/5/15) $$
-binfmt_elf.c: use get_random_int() to fix entropy depleting.
-block: cfq: merge tweaked tunable.
-XZ: Optimized XZ Compression.
-Will Be Introducing Experimental Features In X Version.
-Compiled With Linaro 4.9.3.
-Overall Battery Performance Improved And Performance Tweaked.
$$ Sixth Release(23/4/15) $$
-nohz_full: Add Kconfig parameter for scalable detection of all-idle state.
-ARM Patches:-
-ARM: prefetch: remove redundant "cc" clobber.
-ARM: atomics: prefetch the destination word for write prior to strex.
-ARM: 7983/1: atomics: implement a better __atomic_add_unless for v6+.
-Apply frequency calculation change from ondemand to hotplug. (Thanks to intersectraven)
-Apply frequency calculation change from ondemand to hotplug. ~~
-Do not scale to max frequency when hotplugging CPUs. ~~
-Ramped Up To Minor Version Update 4.5.
$$ Fifth Release(18/4/15) $$
-Enhance power efficiency: Series of patches from NVIDIA.
-sched/idle: Avoid spurious wakeup IPIs
-Prevent reschedule on offline CPU.
-Use built-in byte swap function.
-Optimizations For Modern Arm Platform.
-Optimized ARM memset and memzero functions.
-lib/string: use glibc version.
-lib/memcopy: use glibc version.
-Various Patches For ARM Platform.(Thanks To Khilman)
-Disabled deferment during full tickless mode.(Thanks To IntersecRaven)
$$ Fourth Release(16/4/15) $$
-IO Scheduler Added : ROW
-Incompatibility Issues Fixed
-Added Block Patches!
-Made IO Tweaks!
-Bumped Up To Version "3.0"
-Compiled With Linaro 4.9.3
$$ Third Release(14/4/15) $$
-I/O Schedulers Removed*new (they have issues with mediatek so won't work)
-Unstable Governors Fixed, Interactive Governors Removed
-Made Small Tweaks
-Bumped Up To Minor Update Version "2.5"
-Compiled With Linaro 4.9.3
$$ Second Release(10/4/15) $$
-I/O Schedulers Added :- ROW, SIO, VR, ZEN *new (they have issues with mediatek so won't work)
-Kernel Version Bumped up to 3.10.73+ *new
-Added Various I/O Tweaks *new
-Tweaks For Better Battery (smp.c) *new
-Compiled With Linaro 4.9.3
$$ Initial Release(9/4/15) $$
To Do List :-
* Add I/O Schedulers. (DONE-Worthless on MTK)
* Add More Governers.
* OverClock (HardPlay).
* Tap To Wake & Sweep To Wake.(DONE-Successfully Implemented)
kunal.kene.1797 said:
blackbox-kernel
this kernel is based off latest sources from google! This kernel has been made to balance perfectly between performance and battery backup. This kernel will get updates periodically and will get updated with new features on every update. This kernel is made for android one devices running 5.1 stock rom and also cm-12.1 custom rom. And will also be compatible with any other cm compatible rom's
features :
init.d support
compiled with linaro 4.9.3
dirty ratio tweaks
disabled noatime and nodiratime
added dynamic fsync (thanks to @faux123)
multicore scheduler support
io blockplugs removed for performance improvements
network tweaks for lower ping and higher output speeds
mmc: Disable crc check for 30% extra performance
mali gpu cache optimizations and various gpu tweaks
optimized various files
reduced cache pressure
gfs sleepers disabled
compatible with both stock lp and cm12.1 rom (all cm based rom's too)
governer : Interactiveplus, interactive, consetvative, on demand, userspace, powersave, hotplug, performance.
flashing instructions :
download the zip file.
copy to sd card & enter recovery.
flash the kernel and that will be it!
download : https://kunalkene1797.in/downloads
xda:devdb information
[kernel][lp] blackbox-kenel [v-1.0][sprout] | from the darkest places, kernel for the oem cross device development
contributors
kunal.kene.1797
source code: https://github.com/blackbox-kernel/blackbox_sprout
kernel special features:
version information
status: stable
current stable version: 1.0
stable release date: 2015-04-10
created 2015-04-09
last updated 2015-04-09
Click to expand...
Click to collapse
file not found ??
Would OC really be possible?
Sent from my Micromax AQ4501 using XDA Free mobile app
File not found (404 error)
Kunal.Kene.1797 said:
BlackBox-Kernel
This Kernel Is Based Off Latest Sources From Google! This Kernel Has Been Made To Balance Perfectly Between Performance And Battery Backup. This Kernel Will Get Updates Periodically And Will Get Updated With New Features On Every Update. This Kernel Is Made For Android One Devices Running 5.1 Stock ROM and Also CM-12.1 Custom ROM. And Will Also Be Compatible With Any Other CM Compatible ROM's
Features :
init.d support
Compiled With Linaro 4.9.3
Dirty Ratio Tweaks
Disabled noatime and nodiratime
Added Dynamic FSync (Thanks To @Faux123)
Multicore Scheduler Support
IO BlockPlugs Removed For Performance Improvements
Network Tweaks For Lower Ping And Higher Output Speeds
MMC: disable crc check for 30% extra performance
Mali GPU cache Optimizations And Various GPU Tweaks
Optimized Various Files
Reduced Cache Pressure
GFS Sleepers Disabled
Compatible With Both Stock LP And CM12.1 ROM (All CM Based ROM's Too)
Governer : InteractivePlus, Interactive, Consetvative, On Demand, UserSpace, PowerSave, HotPlug, Performance.
Flashing Instructions :
Download The Zip File.
Copy To SD Card & Enter Recovery.
Flash The Kernel And That Will Be it!
Download : https://kunalkene1797.in/downloads
XDA:DevDB Information
[KERNEL][LP] BlackBox-Kenel [V-1.0][SPROUT] | From The Darkest Places, Kernel for the OEM Cross Device Development
Contributors
Kunal.Kene.1797
Source Code: https://github.com/BlackBox-Kernel/blackbox_sprout
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-04-10
Created 2015-04-09
Last Updated 2015-04-09
Click to expand...
Click to collapse
Bro... It shows "file not found" error...
I downloaded
And guess what it bootlooped my roar A50 with cm12.1
ammuuu08 said:
View attachment 3254045
file not found
Click to expand...
Click to collapse
bowo3 said:
File not found (404 error)
Click to expand...
Click to collapse
Rino Appus said:
Bro... It shows "file not found" error...
Click to expand...
Click to collapse
Those who were haveing file not found issue, the only thing that has to be done was reove the https:// from the link, i've made the changes in the OP now you can download the kernel
Okkk..
Eager to test and tested it also but cant boot up after installing it
Firstly i was installed it on Thunderzap kernel and then (thought that it may be overlapping) tried to install over stock CM 12.1 kernel also but same problem.
Hope get it running soon
working
working like a charm in Roar A50 :fingers-crossed:
Thedifferent said:
And guess what it bootlooped my roar A50 with cm12.1
Click to expand...
Click to collapse
hjmodi said:
Eager to test and tested it also but cant boot up after installing it
Firstly i was installed it on Thunderzap kernel and then (thought that it may be overlapping) tried to install over stock CM 12.1 kernel also but same problem.
Hope get it running soon
Click to expand...
Click to collapse
With BlackBox-2.0 All Your Issues Are Solved Now!
Thanks a lot.. Working great loved it. But whenever i'm using governers other than hotplug and turn screen off its getting CPUstoo low that its getting switched off...
Same problem is there in Thunderzap Kernel by @varun.chitre15
I hope you will not mind a feature request...
I can't list each and every feature so i'll just point to Boeffla kernel... With almost every feature
Especially i just love PegasusQ governer
Thanks
hjmodi said:
Thanks a lot.. Working great loved it. But whenever i'm using governers other than hotplug and turn screen off its getting CPUstoo low that its getting switched off...
Same problem is there in Thunderzap Kernel by @varun.chitre15
I hope you will not mind a feature request...
I can't list each and every feature so i'll just point to Boeffla kernel... With almost every feature
Especially i just love PegasusQ governer
Thanks
Click to expand...
Click to collapse
Its Strange i've been using interactive plus for a day now and i haven't encountered any issues, even on thunderzap kernel used them and working fine! if u r sure its something other than your device a logcat will be appriciated as no one else in encountering this issue . I'll taka a look:fingers-crossed:
Kunal.Kene.1797 said:
Its Strange i've been using interactive plus for a day now and i haven't encountered any issues, even on thunderzap kernel used them and working fine! if u r sure its something other than your device a logcat will be appriciated as no one else in encountering this issue . I'll taka a look:fingers-crossed:
Click to expand...
Click to collapse
Thanks for your response but i don't know how to take proper logcat (whenever i'm using adb logcat its just showing too much command going on and keep going )
Hope you can point me and in the next reply i'll provide you the logcat :victory:
EDIT:- tried logcat > output/dir/lol.txt and this is what i got....
Same issue with this guys also here
I too encounter this issue :/
Sent from my Micromax AQ4501 using XDA Free mobile app
hjmodi said:
Thanks for your response but i don't know how to take proper logcat (whenever i'm using adb logcat its just showing too much command going on and keep going )
Hope you can point me and in the next reply i'll provide you the logcat :victory:
EDIT:- tried logcat > output/dir/lol.txt and this is what i got....
Same issue with this guys also here
Click to expand...
Click to collapse
xdaisntfornoobs said:
I too encounter this issue :/
Sent from my Micromax AQ4501 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the reports, i'll take a look and make changes update fix and imrove the next version of kernel! Meanwhile as of i know these governors and io schedulers have issue with mediatek and thus causing all this issue! also the reason why varun disabled those governers!
Warm Regards!
Thanks a lot! Eagerly waiting for your next build!
You're the only dev who actually interacts with the users and not ignore the problems!
Sent from my Micromax AQ4501 using XDA Free mobile app
Please add FM drivers in kernel so that we can run best xda community app spiritF
Sent from my Sparkle V using XDA Premium 4 mobile app
Awesome work bro. Looking forward to some ROM ports by you.[emoji12] [emoji12] [emoji12] [emoji12] [emoji12] [emoji12] [emoji13]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Never skip LAG-day - Live on the EdgeCurrently supported: G925F, G925I, G925T & G925W8New Unified-Testbuild for Flat & Edge (5.1.1 Only):
CLICK HERE
Previous 5.1.1 build for G925F is in the second post below the OP
Code:
###Disclaimer###
Your warranty is now void.
We are not responsible if your phone will be damaged, broken, bootlooping or detonating in a thermonuclear reaction.
YOU are choosing to make these modifications and accept the fact that something might go wrong.
Introduction
SimplKernel is developed by SimplTeam. We originate from the Note4 and have a long story of success there. Our builds are known for being close to stock, yet full of useful features and enhancements. The aim is to provide maximum performance and maximum batterylife. No compromises.
Features
# Based on latest G925FXXU1AOE3
# NightClock fully fixed
# Compiled with AARCH64-Android-4.8 toolchain - Kudos Google, this is one is awesome
# Replaced CPU_FREQ_RELATION_L with C for Interactive -> selects freq with min euclidean distance to target freq, should be more efficient
# MDNIE ColorControl fixing it...
# VoltageControl (CPU, GPU, HPM, BUS)
# Underclocking by default
# Full Synapse Support
# SELinux mode set to Permissive
# Governors added: powersave, intellidemand, ondemand, bluactive and intelliactive
# busybox and init.d
Click to expand...
Click to collapse
--> More will be added, this is just the start :angel:
Changelog
Code:
RXF
- Removed mDNIE Control + switchback to mDNIE Lite
- Some AOE5 cherry-picks
- Sensorhub, MemoryManagement etc.
- Added and configured Direct_Memory_Access (Thanks to Samsung Japan)
- Tons of patches (see Github)
- Disabled the OOM-Killer (out-of-memory-killer) (Samsung Japan)
- We're still testing whether this actually has a practical purpose in daily usage or not
R4.1F/I
- Removed mDNIE ColorControl (working on it)
- Added Support for AOE6 based Roms (in-call audio fix)
R4T/W8 - Same as R4F
R4F
- Based on G925FXXU1AOE3
- Busybox updated to 1.23.2
- NightClock fixed
- GPS Fix for AOE3 based Firmwares
- Synapse included
- Enabled Synapse Support
- mDNIE Control -> Control your DisplayColors! Will be expanded.
- Governor selection for individual cluster (A53 & A57)
- Full CPU VoltageControl for both A53 & A57
- Underclocking to 200mhz enabled by Default
- HPM VoltageControl
- GPU VoltageControl
- Memory Bus, Internal Bus & Image Signal Processor VoltageControl
- mDNIE Tab in Synapse (name is Screen)
- I/O Scheduler settings (Tunables + Definable Read-Ahead)
- BFQ and Deadline I/O scheds added*
- BFQ as default
- VirtualMachine Tweaks
- Full Synapse Settings Backup added
- Fixed 2 GPIO memory leaks + 3rd probable leak
- Memory-killer enhancements (see Github)
- GPU Throttling Levels smoothened
- more stuff I forgot
R2.9F
- Added Overclock and Underclock (@ktoonsez) - Only in Ktweaker for now!
- Added VoltageControl
- Fixed the NightClock - Display is now fully turning off (Switch from MDNIE_LITE to MDNIE)
- DynamicMemoryAllocation: Reduce max PAGE_SIZE to 4 and CMA areas to 4
- Minor tweaks here and there, check my github :D
- Synapse support for 2.9F withdrawn - This build is a patch for NightClock users! R3F coming soon too..
- Added KTweaker for this build - @Ktoonsez ;)
v1.2F/T/W8
- Added T-Mobile, Canadian and I variants (T, W8 & I)
- Added Synapse Support
- Automatized Wifi-Forgetting fix in the ramdisk
- Ported MDNIE HIJACK (ColorControl) - Basic settings for now
- Reverted previous DeepSleep workaround and applied proper patch
- Added awesomeness
v1.1F
- Patched the DeepSleep problem / thanks to @HomerSp for this
- Added governors: Bluactive, Intelliactive, MythX (disabled) and enabled powersave + ondemand
- Added busybox and init.d
- CPU_FREQ_RELATION_C: When scaling freqs, it selects the freq with the minimum euclidean distance to target.
How to install
Via recovery
You have to have a custom recovery like TWRP, Philz or CWM installed.
- Download the kernel
- Reboot to recovery
- A backup is always recommended
- Flash the zip file
- You're done! Reboot and enjoy.
Via Flashify
- Make sure that you are rooted.
- Download the zip and extract the boot.img
- Download the free app Flashify (Caution: Free Version only allows 3 flashes per day!)
- Grant Flashify Root permissions.
- In main screen, select Boot image and navigate to the previously extracted boot.img
Downloads
Al Builds below are for 5.0.2 and for NO OTHER version.
International (G925F & G925I) (RXF) (Android 5.0.2)
Latest RXF - click here
Click to expand...
Click to collapse
International (G925F and G925I) (Android 5.0.2) Archive
Archive
Click to expand...
Click to collapse
T-Mobile, Canadian (T & W8): (R4T/W8) (Android 5.0.2)
Latest R4T/W8 click here (version with MDNIE and possible viewfinder distortion
Click to expand...
Click to collapse
T-Mobile, Canadian (T & W8): (Archive) (Android 5.0.2)
Archive
Click to expand...
Click to collapse
NO MIRRORS. If I see one it will be reported straight away without any mercy and builds will be suspended. Have some respect and read and follow this please. If you need a mirror, please tell my why and we'll take a look.
If you apply Interactive in Synapse, ALWAYS enable it for both clusters. Enabling it for only one will cause funny effects, perhaps even a solid chaos, batterydrain and other unpleasant things. You've been warned.
Credits
S6 Edge Tester-Team: For doing what no one did before, flashing a never tested build and going through huge pains to help me. It wouldn't be possible without any of you! :angel:
@strikerdj2011
@jaytehnut
@Briz0wn
@charlypaez
@sswagonman
@ShermCraig
@beats4x
@ktetreault14
@nvict
@skivnit
@leoaudio13
@xadidas4lifex
@reesedizan
@Daxxer2007
@faultlog
@techenthusiast
@koko115
XDA:DevDB Information
SimplKernel, Kernel for the Samsung Galaxy S6 Edge
Contributors
mythos234, Psycho_666, Hani K.
Source Code: https://gitlab.com/mythos234/SimplKernel-LL-G925F
Kernel Special Features:
Version Information
Status: Snapshot
Current Stable Version: R4.1F
Stable Release Date: 2015-05-20
Created 2015-04-24
Last Updated 2018-06-05
Known Issues / Fixes & Changelog Monitor
Changelog Monitor
I can't keep up with my own speed :angel:
Fixes
Knox Popups and Warnings
Apparently Samsung decidedadd some Knox-Upgrades, which will not be so happy about my change to Permissive and tell you about this in even more annoying ways. The best solution would be a custom Rom which ships de-knoxed, but since this phone is brand-new, and you likely run stock, here is the manual way:
- Download TitaniumBackup (yet again, the Pro version is great, so please support the dev for the awesome work)
- Remove the app "Security Log" (thanks for reporting this @Cr4z33)
Wifi settings forgotten after reboot
- Go to build.prop
- Find: ro.securestorage.support
- Replace the default true value with false
- Attention: Might break PrivateMode, not tested on the S6 yet
//Automatic Fix will be added in v1.2
AMOLED CinemaMod in Display settings has distorted colors! :crying:
Flash the normal R4F. This only happens with the ViewFinderFix build. Choose the lesser of both evils.
Great, but not my Viewfinder is distorted..
Pull down the statusbar or flash the regular build.
Help, I can't edit the A53 Maximum Frequency!
Welcome to the club. We're having permission problems and weren't able to fix them yet. Rest should work fine.
Synapse is covered in Red.. Errors everywhere.. What did you do now?
No worries, just install the following Busybox to xbin (should be default) and reboot:
https://play.google.com/store/apps/details?id=stericson.busyboxSome settings aren't sticking for me..
We are aware of this and are trying to figure out a fix. For now this problem should mostly be limited to the A53 max frequency.
No GPS? Try this:
https://www.androidfilehost.com/?fid=23991606952608763
Advisory to Kangers:
We all value and keep the spirit of OpenSource alive here at XDA. Please work clean and use Cherry-Picks or otherwise provide information about the origin of changes. SimplTeam is watching XDA with hawk-eyes and will report Kanging and Ripoffs to the XDA team, where it will be dealt with accordingly. Please don't make this neccesary and behave like a grown up. Lets keep the fairness and developer-spirit in our heart, since this is what drives us here.
SimplKernel 5.1.1 / Only for G925F
Only for G925F (5.1.1 BOFJ), NO OTHER variant
This applies especially here:
Code:
###Disclaimer###
Your warranty is now void. We are not responsible if your phone will be damaged, broken, bootlooping or detonating in a thermonuclear reaction.
YOU are choosing to make these modifications and accept the fact that something might go wrong.
Not quite ready yet, but it should mostly work..
This is NOT a stable build. No proper stability tests have been run, besides me using it all day long.
changelog
Code:
- Based on BOFJ 5.1.1
- Removed Bluactive and Intelliactive / Not exactly due to my free will
- Rest almost identical to previous RXF
Read this!!!
Okay. This is an earlier build which I ran for testing. Synapse is working and just about everything that ran on RXF does as well.
I have no proper changelog, since I spent all day on fighting the new SBoot.. No idea if my Zone_DMA is inside, my Git History is weird and this
was just supposed to be a testbuild...
Known Issues
Opening Synapse will lead to random vibration. Might go away after a while, did for me. This vibration might carry on randomly onwards, altough it only happened to me like once. I haven't seen random reboots, but that doesn't mean that there won't be any. But I don't think that there will be, but you never know.
Better safe than sorry
Having said this, I'm running this build all day long and haven't felt the need to throw it away yet.
This is not the final version, but it should be a mostly good running snapshot for those of you who can't wait anymore.
As this is more experimental than other builds, please report issues asap.
Only for G925F, running 5.1.1 BOFJ. NO OTHER phone or earlier version.
Download
https://www.androidfilehost.com/?fid=24052804347765849
Click to expand...
Click to collapse
What about W8 Canadian S6 edge?
brar.arsh said:
What about W8 Canadian S6 edge?
Click to expand...
Click to collapse
Hi. If you are willing to beta test, I'll happily add support for it
I can only publish tested builds, and I don't have a S6 Edge yet, so the more testers help me, the more versions I can add
Powered by SimplRom and SimplKernel.
I will happily test a tmobile build.
Testing on T-Mobile so far every thing works
mythos234 said:
Hi. If you are willing to beta test, I'll happily add support for it
I can only publish tested builds, and I don't have a S6 Edge yet, so the more testers help me, the more versions I can add
Powered by SimplRom and SimplKernel.
Click to expand...
Click to collapse
I'm open for a test build as well for the W8( Canadian variant).
Working well on G925T , I'm going to charge it and see how it does tomorrow
nxsone said:
Working well on G925T , I'm going to charge it and see how it does tomorrow
Click to expand...
Click to collapse
This is great news.
Thanks op working good here
Upp +1
Sent From By Lovelesss Galaxy S6 EDGE SM_N925F
Hopefully will working on the g925i when we get custom recovery
Is it possible to flash this kernel through Flashfy? I don't have TWRP installed.
PS. Sorry, look into zip and find some folders in /system with modules etc. There's no way to use flashify as I see((
mythos234 said:
Hi. If you are willing to beta test, I'll happily add support for it
I can only publish tested builds, and I don't have a S6 Edge yet, so the more testers help me, the more versions I can add
Powered by SimplRom and SimplKernel.
Click to expand...
Click to collapse
I can beta test for the Canadian model.
Don't bother me but getting this after install
Remove knox apps.
koko115 said:
Remove knox apps.
Click to expand...
Click to collapse
That got it thanks
jaythenut said:
Don't bother me but getting this after install
Click to expand...
Click to collapse
Knox and root Permissive don't go well together. So Sammy added new security measures again.. Until there is a custom Rom witj removed Knox, you'll need to do that manually. Can you tell me how you deleted it? I'll add it to the second post
Powered by SimplRom and SimplKernel.
mythos234 said:
Knox and root don't go well together. So Sammy added new security measures again.. Until there is a custom Rom witj removed Knox, you'll need to do that manually. Can you tell me how you deleted it? I'll add it to the second post
Powered by SimplRom and SimplKernel.
Click to expand...
Click to collapse
I removed Knox with titanium backup has worked
Hi,
Presenting My 2nd kernel for Condor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
..Features..
[*]Based on CM latest Source
[*]Linaro cortex a7 toolchains help to reduce lag
[*]exfat support [OTG][untested]
[*]Disabled CRC check
[*]Optimized SLUB
[*]Aggressive multi-core power savings
[*]Enabled ARCH_POWER
[*]lowered latency
[*]Fastcharge
[*]Added Simple Gpu Algorithm Thanks to @faux123
[*]Governor Added
Code:
Lionheart
Smartmax
ZZMOVE
[*]kcal by @savoca
[*]Double tap to wake fixed
[*] fs: Add fsync control
[*] block/deadline: tweaked for better performance
[*] I/O Schedulers added
Code:
zen
vr
sio
fifo
[*] fs/dyn_sync_cntrl: dynamic sync control
[*]Powersuspend: new PM kernel driver
[*] HotPlug
Code:
Intelliplug thanks to [user=3332811]@faux123[/user] again :D
AutoSMP hotplug driver thnx to [user=4203114]@mrg666[/user]
[*] Can be boot with Anyrom.zip only [cm13/aosp]
[*] kernel version upgrade to 3.4.110 NEW
[*] Vibration Intensity Control: Let’s you adjust the intensity at which your phone vibrates
NOTE: -I have Worked this project. For that I dont want money . but you should respect my project and also if you use my commit or source please feel free to it. Will be glad for that. Just include me in the credit list and thats all. If i am forgetting someone name the feel free to PM me
lasted antutu score is 31000+
Download link with changelogs
Screenshoot- [updated]
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
You can contribute by commit, rate the thread 5 star ,Donating me or by simple pressing thanks...
Source
Help me To pay my Internet bill
Note:-
Don't me stupid thing like what is this? use Google for it. i will clarify it as much as I can but everything has its own limitation . So please use Google .
Click to expand...
Click to collapse
Thanks-
@ZaneZam ,
@cm
@faux123
@rainforce279
@Carlos Arriaga, he is man of my kernel fixing i love u
@savoca, @squid2 ,@Casper1982,Motorola, xda, linux, @KazuDante for testing ..all of us
Click to expand...
Click to collapse
XDA:DevDB Information
[OTUS][CM13][KERNEL]Leno build-5 [DT2W][KCAL][HOTPLUG DRIVERs], Kernel for the Moto E 2015
Contributors
rajit
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Build-2
Created 2016-01-14
Last Updated 2016-01-19
How to Flash ??
1. Download the leest one . You can take the old one too
2. Flash it on any cm13/aosp based Rom With lesest twrp*
3. Clear cache(must or sometime the device will not work properly)
4.reboot
What is the best value to set the rom?
IDK, its depends on how u use.
Can I turn on two hotplug driver ?
-my suggestion -No
What app will be best?
use kernel aduitor and do one thing apply all value after 40sec as the kernel need to satble itself.
Any other?question?
-well ask it but searching can solve 99.9% issue
if you not like me ??
Get lost please
ZZmoove
-
ZaneZam said:
Description of how u can switch build in Profiles
Beside of the well known ones like "Yank...","Battery","Performance" etc. settings
i did some new ones for ZZMoove v0.8 in addition which can be checked out
in particular in the new profile header file provided HERE
So for those of u which have not the possibility to switch profiles with kernel dev provided tools/scripts/or what
ever but still want to switch to any of the build in settings you can do following:
use tools like Android Tuner ,SetCPU or similar tools which are supporting the change of multible tuneables on-the-fly
or just do it directly in kernel sysfs via a terminal emulator and give the tuneable "profile_number" one of the following values:
for Default (set governor defaults)
for Yank Battery -> old untouched setting (a very good battery/performance balanced setting DEV-NOTE: highly recommended!)
for Yank Battery Extreme -> old untouched setting (like yank battery but focus on battery saving)
for ZaneZam Battery -> old untouched setting (a more 'harsh' setting strictly focused on battery saving DEV-NOTE: might give some lags!)
for ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting (DEV-NOTE: recommended too! )
for ZaneZam Optimized -> old untouched setting (balanced setting with no focus in any direction DEV-NOTE: relict from back in the days, even though some people still like it!)
for ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
for ZaneZam Performance -> old untouched setting (all you can get from zzmoove in terms of performance but still has the fast down scaling/hotplugging behaving)
for ZaneZam InZane -> NEW! based on performance with new auto fast scaling active. a new experience!
for ZaneZam Gaming -> NEW! based on performance with new scaling block enabled to avoid cpu overheating during gameplay
for ZaneZam Relax -> NEW! based on moderate (except hotplug settings) with relaxed sleep settings (to react audio/bluetooth/wakeup issues)
(since version 0.9 beta4: cpu temperature threshold of 65°C enabled if exynos4 cpu temperature reading support was compiled with the governor)
after a tunebable view-refresh in the tools/console u can see the name of the currently set profile in the "profile" tuneable,
but keep in mind not every tool supports returning chars in tunebables as some of them are internally handling them as numbers,
even though in fact they are chars in kernel sysfs so u might see a "-1" then (for example with SetCPU) not so with
Android Tuner which shows (again) what a great app this is.
Some last note for the game profile: plz do not complain about ingame performance issues or lags with this setting.
i tuned it to be more aggressive in terms of bringing freq down. reference game was angy birds star wars *g* calming
down zzmoove while playing this game was really a chellange, don't know why but it stresses the system a lot more
than others and u know how 'hasty' zzmoove can be another test game was temple run 2 and here u can see a significant
improvement with this setting. it's a bit difficult to give u THE universal setting for all games as they differ too much in terms
of how much the system is stressed by them. so we have to share our experiences to further optmize it till i made scaling
blocks more "intelligent" and therefore more automatically (idea already exists!!)
Have fun with all the settings and feel free to report back how they work for you, and/or post new ones! :highfive:
Click to expand...
Click to collapse
Download link with change log
OLD
Build-1
Code:
initial release
Build-2 BIG ONE
Code:
[LIST]
[*]Quick wakeup
[*] deafualt on demand
[*] zzmoove governor added [new] Special Thnx to @ZaneZam
[*] intellidemand governor added [new]
[*] conservative governor added [new]
[*] Lionheart governor added [new]
[*] Optimize very unlikely/likely branches
[*] Optimize for size
[*] Advanced Power Management Emulation
[*] Reduced swappiness from 60 to 40
[*] Double tap to wake fixed
[*] swipe to wake removed
[*] LCD_KCAL: Color control thanks to @savoca
[*] Lionheart Governor added
[*] Smartmax Governor added
[*] Added Simple Gpu Algorithm by Faux123
[*] Fastcharging
[*] lowered latency
[*] Enabled ARCH_POWER
[*] Enabled aggressive multi-core power savings
[*] Optimized SLUB
[*] Disabled CRC check
[*] fs: Add fsync control
[*] block/deadline: tweaked for better performance
[*] I/O Schedulers added
[*] zen
[*] vr
[*] sio
[*] fifo
[*]
[*] fs/dyn_sync_cntrl: dynamic sync control
[*] Powersuspend: new PM kernel driver
[*] Intelliplug thanks to @faux123 again
[*] kernel version upgrade to 3.4.110
[*] ZZMOOVE GOV added
[*] Hotplug: Autosmp driver
[*] Touch Freeze issue fixed
[*] Now can boot with anyrom.zip [cm13/aosp]
I can remember everything ..see github
[/LIST]
USE this app for enable/disable Dt2w and
use this think for KCAL Color control
Click to expand...
Click to collapse
Rate this thread 5 Sta *****R
What is KCAL - Advanced color contro ?? see this link go and give a thank
Double tap to wake
Download link
Code:
[URL="http://forum.xda-developers.com/showpost.php?p=64929607&postcount=35"]Build-2[/URL] [22/01/2016]
Thanks for your awesome work... !!!
Thanks for this dude!
Inviato dal mio Moto E utilizzando Tapatalk
nice work, but where can we download it
this is an stupid question but... whats make on my terminal change terminal? what improves i have? please answer me
Awesome
Sent from my Moto E using Tapatalk
iTudorS said:
nice work, but where can we download it
Click to expand...
Click to collapse
Seems Like he forgot download link lol.
anyone could upload stock or cm boot.img ?? i need that will upload after that
Edit:- Need a banner can anyone make it ?
screen shoot and review is needed as i don't own the device itself
Edit2:-
No update??
rajit said:
anyone could upload stock or cm boot.img ?? i need that will upload after that
Edit:- Need a banner can anyone make it ?
screen shoot and review is needed as i don't own the device itself
Edit2:-
No update??
Click to expand...
Click to collapse
For banner, contact Adarsh1998....And as for testing, I flashed the latest build on cm13 nightly. It screwed up my phone's display settings totally. Will update a logcat soon. Anyways, good work and happy to see so much developing for our little guy!!!
Hit Thanks if I helped!!!!!!!!!!!!!!!!!!!!!!!
PoseidonKing said:
For banner, contact Adarsh1998....And as for testing, I flashed the latest build on cm13 nightly. It screwed up my phone's display settings totally. Will update a logcat soon. Anyways, good work and happy to see so much developing for our little guy!!!
Hit Thanks if I helped!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
i dont own the device so i cant see the thing you have seen. a last_kmsg and ur elaboration will help me
rajit said:
anyone could upload stock or cm boot.img ?? i need that will upload after that
Edit:- Need a banner can anyone make it ?
screen shoot and review is needed as i don't own the device itself
Edit2:-
No update??
Click to expand...
Click to collapse
I will try it in like 1hr
edit: kernel flashes correctly then when attempting to boot it goes to recovery with the message: FstBoot Reason: Fall-through from normal boot node, Boot up failed
iTudorS said:
I will try it in like 1hr
edit: kernel flashes correctly then when attempting to boot it goes to recovery with the message: FstBoot Reason: Fall-through from normal boot node, Boot up failed
Click to expand...
Click to collapse
Ahhh expecting this.. can u please upload the stock or any cm boot.img ??
rajit said:
Ahhh expecting this.. can u please upload the stock or any cm boot.img ??
Click to expand...
Click to collapse
huh now i'm on a custom kernel, can't u get it from cm13 zip?
iTudorS said:
huh now i'm on a custom kernel, can't u get it from cm13 zip?
Click to expand...
Click to collapse
As i mentioned I don't own the device...
rajit said:
As i mentioned I don't own the device...
Click to expand...
Click to collapse
but you can download the zip on the cyanogenmod page
Is anyone out their who could upload a boot.img ? Stock or cm ? Seems no one -_-
rajit said:
Is anyone out their who could upload a boot.img ? Stock or cm ? Seems no one -_-
Click to expand...
Click to collapse
Here it is
rajit said:
Is anyone out their who could upload a boot.img ? Stock or cm ? Seems no one -_-
Click to expand...
Click to collapse
Why don't you use a script to unpack boot.img,copy zImage and repack boot.img?Want the link?