Thread created by hbenz2008 but now maintained by me CWGSM3VO:
Requirements:
- Unlocked JBBL/KKBL bootloader. Builds are bootloader specific.
- Updated KKBL recovery, can find one here: https://twitter.com/dhacker29/status/583847256589213696
- Updated JBBL recovery, can find one here: http://downloads.blissroms.com/Recovery/Recovery/moto_msm8960_jbbl/
Builds can be downloaded from:
- CMxlog: http://www.cmxlog.com/12.1 and choose your device.
- CyanogenMod: http://download.cyanogenmod.org/ and choose your device.
GApps:
- DHacker gapps:
4-25-2015: https://www.androidfilehost.com/?fid=96042739161893996
6-07-2015: https://www.androidfilehost.com/?fid=24052804347756927
- Delta gapps: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
What works:
- Phone
- WiFi
- GPS
- SMS/MMS
- Mobile Data
- Camera/Camcorder
- HDMI
- Bluetooth
- Call Recording
- Tethering (WiFi: Yes / USB: Yes / BT: Yes)
- USB storage
- F2FS for /data, /data/media and /cache (recovery/kernel dependant)
Known issues:
- The "calc bug". This affects some users. This is due to the GPU crashing. A fix may be hard to nail down. Workaround is to disable H/W layers + force GPU rendering via devopts.
- HDMI. Depends on TV. Works 100% on some, not others (in my testing) -- statusbar/navbar is visible and small scaling issue (statusbar cut off somewhat). Reported not working on AHD.
- Bluetooth; some reported issues with different car makes/models. For me personally, it's worked with a variety of headsets and devices (decks, etc). Tethering appears to work for me, some reports of issues. Issues reported with wearables being paired and WiFi not working or requiring BT to be activated after WiFi connected.
- MMS; most issues can be tracked to incorrect APN settings, please verify with your provider (or try searching this or CM11 threads)
- WiFi; some users have reported issues connecting to certain brands of APs and/or band-mode; most reports isolated to security protocol being used (WPA vs WPA2)
- Clock resets to 1970. Thanks to @MaicolS for using this solution successfully: http://forums.androidcentral.com/an...-update-can-t-connect-google.html#post4323256
- Snapchat crashes sending video. @VlitalityX found this solution: Developer Options->Drawing->Turn on "Force RTL layout direction" then turn it off.
- Alarms not firing or repeating. Disable Automatic Network Date & Time in Settings->Date & Time. Appears to be an issue with RTC writes and/or QCom time_daemon.
- Some reports of GPS not working, try this fix: http://forum.xda-developers.com/showpost.php?p=56659808&postcount=5264
Reporting issues:
- Please ensure your signature includes device, rom, etc to help if posting in the thread.
- Provide a logcat capture if possible, otherwise enable aplogd.
- Enable aplogd, see here: http://forum.xda-developers.com/showpost.php?p=59620294&postcount=2327 and provide logs. You can safely leave this enabled.
- Open a JIRA bug report, see here: https://jira.cyanogenmod.org and provide logs.
Notes:
- There are unofficial builds provided in this thread and should not be used when filing reports with JIRA.
- When coming from another ROM (non-CM) a clean-wipe is recommended (backup your data + internal sdcard data)
- Some users have had issues clean installing CM12.1 - one workaround known is to install CM11 first then upgrade to CM12.1
- The Xposed framework is not supported. Please uninstall/remove it and any modules before reporting issues.
Tips:
- I use TWRP
- I use DHacker's GApps package and let Google via my account update everything as need be.
- For me, a "clean wipe" is formatting the following: /system, /cache, /data and /data/media. Backup anything of value from /data and /data/media before doing this. Flash ROM, flash GApps, reboot. Authorize your PC USB connection on the phone after enabling Developer Options and test adb from the Android SDK.
- When performing a "dirty flash" (upgrade) I manually wipe /cache and dalvik-cache before rebooting to UI.
- For KKBL to JBBL issues with downgrading, see this: http://forum.xda-developers.com/showpost.php?p=63091712&postcount=4465 and this: http://forum.xda-developers.com/showpost.php?p=56963255&postcount=702
- Drained to 1% battery and boot-looping? Try this: http://forum.xda-developers.com/showpost.php?p=61728073&postcount=3754
- If your CM build is 1+ month older than what you plan to flash/upgrade, it is recommended you do a clean flash.
So far, I had some issues with network, apparently it's losing WiFi connection randomly . The Play Store takes a long time to download or update apps or get "Retry" messages.
None of those issues here,however i had some unfortunately dialer stopped,it corrected itself after couple reboots.
Downloaded es file explorer as fx explorer couldn't get into System files.
GPS still hosed in my case
I forgot to mention: during the flashing, a mount error appear, but the ROM booted, normally. Happened to you to?
No but flashing was really quick I was surprised.under a min maybe then it took bout 5 min to reboot.but no errors
Hummmm, strange... What recovery are you using? I flashed dHacker's one, before flashing the ROM.
And something happened just now: I rebooted the phone and the DPI as changed! All the things are smaller now. Weird...
Most likely need to reflash.using twrp 7.1 and flashed dhacker gapps.
note: cant write to System file yet
I know this is for KKBL, but can this be built for JBBL? How is the overall feel of the build anyways?
Sent from my ATRIX HD using XDA Free mobile app
douglasvbarone said:
I forgot to mention: during the flashing, a mount error appear, but the ROM booted, normally. Happened to you to?
Click to expand...
Click to collapse
FYI he said SD card doesnt work yet
doesnt work in what capacity?
lngwca said:
FYI he said SD card doesnt work yet
Click to expand...
Click to collapse
Well, that kills it for me then. Will have to wait. I have all my music and photos on my SD card.
doing a nandroid backup now, but photos in SD can be seen .Once done, i will test music...
Anyone can post a gps.conf from a working gps whether it be jelly bean or kitkat.
... will be appreciated. Under System/etc
very smal file 2kb or so
both music and photos in SD can be manipulated just fine
iBolski said:
Well, that kills it for me then. Will have to wait. I have all my music and photos on my SD card.
Click to expand...
Click to collapse
major beef i have is editing system file. Device is rooted, titanium has access, file explorer have access and sees system file but cant edit.
hbenz2008 said:
both music and photos in SD can be manipulated just fine
major beef i have is editing system file. Device is rooted, titanium has access, file explorer have access and sees system file but cant edit.
Click to expand...
Click to collapse
Ahh, gotcha. I thought there was NO access to the SD card. So, it's just write access. I know under Lollipop, they were supposed to make it work better than they did under KK. Supposedly, it's a setting where you can say give it all access or only to it's own directories. Supposedly though, many apps might have to be rewritten to get this, so if the app hasn't been updated to ask for the new permission, then it won't work.
lngwca said:
FYI he said SD card doesnt work yet
Click to expand...
Click to collapse
The tweet:
Everything except SD YouTube video seems to work on RAZR HD
Click to expand...
Click to collapse
Has nothing to do with SD card, it means SD YouTube videos (SD - Standard Definition, as opposed to HD - High Definition).
his tweet said "Everything except SD YouTube video seems to work on RAZR HD "
so sd as in resolution. i asked him if he could try viralpopup or tubemate. might try this on the weekend to see how this feels.
oh and can someone upload a mirror pls? page won't load 2 download.
ps it's a cm12 port not AOSP too from his threads on twitter
absolutely true, the challenge for now is to gain access to editing system file.
kabaldan said:
The tweet:
Has nothing to do with SD card, it means SD YouTube videos (SD - Standard Definition, as opposed to HD - High Definition).
Click to expand...
Click to collapse
hbenz2008 said:
both music and photos in SD can be manipulated just fine
major beef i have is editing system file. Device is rooted, titanium has access, file explorer have access and sees system file but cant edit.
Click to expand...
Click to collapse
try root explorer to edit system files
http://www.reddit.com/r/Android/comments/2m7fqo/i_wanted_to_keep_a_chart_going_of_apps_we_know/
check play store if you bought/have titanium backup
they pushed an update for support. now if only they updated their UI....
confirmed, works-root explorer-
my bad... just thought that he missed a comma. lol also every ones sd wasnt mounting
Related
Figured you TOPA folk needed your own thread... At least to track TOPA-specific issues!
FRX07.1 is here!!
This is a maintenance release - basically taking the newest components to make a completely up-to-date (as of Sept. 1).
Quite a lot has changed since FRX06 - the install process hasn't really, but be sure to read the changelog in the next post and the caveats in post #3!
<<<This is a link to the... FAQ Click it!!>>>
I have created a complete bundle of FroYo with a stable kernel from GIT (August 19 / 1348), and rootfs from GIT (Sept. 2).
Please, feel free to DONATE to the XDAndroid project!
Every little bit helps!
Directions:
1. Download the full bundle (zip). (Updated September 1 2011)
If instead you just want the system.ext2 (zip) (Updated July 15 2011) file by itself... Don't download this if you're not sure! Grab the full bundle!
2. Extract it. You’ll see a folder, FRX07.1, copy its contents to the root of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.
3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)
4. Screen calibration - you have three choices:
Re-use an old ts-calibration file if you have it and you know it's good.
Download the ts-calibration.zip file and extract it to where you put the rest of the files (root of SD or in a folder - make sure it all stays together!)
Manually calibrate - boot with no ts-calibration file and watch the boot process - you'll be asked to hit 5 points to calibrate the screen. If you have issues calibrating, try an older kernel (1225 works well) Once you have the calibration file hold on to it (make 15 copies if it's a good one ), reboot & go back to the newest kernel!
6. Run haret.exe.. Profit!
Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins so the media scanner can go thru everything, etc. it will be much more pleasurable experience. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot .
Troubleshooting:
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.
See Incremental Updates for more information on updating the kernel and other components.
Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data (all user data is stored in the data.img!!), Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.
Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.
Even though this build is considered fairly stable, you are more than likely going to run into issues. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.
stinebd's Changelog:
stinebd said:
Here’s a new release for you, folks. This is a major release with a ton of changes, new features, and fixes. Our friend hyc/highlandsun did most of the heavy lifting for this release. Highlights include a rewritten RIL with support for world phones and greatly improved CDMA support; fixes for the media codecs; fixes for MMS on Sprint; increased security with the Superuser app.
A list of changes is included below. The FRX07 system image is available for download now, and will require the use of a new rootfs image, also available now. Additionally, we have a new bundle containing everything needed to enjoy a full FRX07 system.
Note: Due to the incredibly long list of changes, this is a somewhat condensed, terse changelog describing only the overall scope of the changes.
FRX07:
frameworks/base:
Major frameworks changes for CDMA/GSM dual-mode worldphone support. (hyc)
Fixes for data connection handling to improve startup time. (hyc)
Fixes for wifi handling to avoid issues on hanged drivers. (hyc)
Stagefreight (media codecs) fixes. (hyc/viruscrazy)
Fixes for Sprint’s wonky MMS markup structure. (hyc)
Fix MediaScanner not finding audio files (including ringtones) in system.ext2
hardware/libhardware_legacy:
Minor GPS driver fixes. (Alex[sp3dev])
Rename wifi interfaces to wlan0 on all devices (hyc)
hardware/xdandroid-ril: Major RIL refactoring for improved performance on all devices, and added CDMA/GSM dual-mode worldphone support. (hyc)
packages/apps/Gallery3D: Switched back to Gallery3D as the gallery app (closes bug #111)
packages/apps/Mms: Fixes for Sprint’s wonky MMS markup structure. (hyc)
packages/apps/Phone: Fixes for CDMA/GSM dual-mode worldphone support. (hyc)
packages/apps/Superuser: Added the Superuser package for authorizing su privileges. This, along with our signed builds, provides greatly increased security for the end user (mostly against malicious apps from the Market).
system/extras/su: Added as a dependency for the Superuser package
vendor/qcom/android-open: Include missing stagefright codec symbols. (hyc/viruscrazy)
To coincide with the FRX07 system image, the following rootfs changes have been made:
init.froyo.rc modifications...
Adjust wpa_supplicant service for the new abstraction provided by libhardware_legacy, as well as interface rename
Abstract the hciattach service to provide bluetooth support on both chipsets
Rename wifi interface to wlan0 on all devices
apns-conf.xml updated
keymaps completely reorganized, and RHOD end-call key has been remapped to be the Home key in Android.
default.prop: set ro.secure=1 to lock down the adb shell - su can be used with the Superuser app to authorize root access in adb if needed.
Click to expand...
Click to collapse
Layman's Changelog
(As in, the changelog I wrote )
FRX07.1 Changelog:
RHOD - all buttons on the front no longer wake the device. Only the power button wakes the device now.
Updated to the newest RIL
hyc's modified libs for video now baked in - *most* HQ YouTube videos (and other HQ videos) should finally work!
RHOD & TOPA - Userland (Android) now controls the LED by default now. If you need to debug sleep, you will have to change the behavior manually. See Detule's post on this topic.
Facebook sync should now work, out-of-box.
FRX07 Changelog:
Updated RIL (thanks hyc!) - this covers many different bugs that were in the old RIL - I'm only going to cover the major ones...
CDMA now works correctly (for the most part). force_cdma (and north_am_dialing) is now deprecated (not needed/ignored!)
You can boot with a SIM in on a CDMA device and choose your GSM or CDMA on the fly under Settings.
Location based on towers now works on CDMA.
1xRTT now displays correctly, but I never seem to get EVDO Rev.a... I always get 0. This is represented by a 3g icon, as this is what the Android framework provides.
Full MMS support! Please see this page for configuration instructions. Will need help fleshing out the list of carriers folks!
Spotty service, switching towers, etc should no longer cause the dreaded SoD (Sleep of Death) condition!
(Basic audio) 3.5mm support for RHOD400/500
Droidwall works out of the box now
Keyboard backlight now fades in/out
Gallery3D back in! Picasa Web Sync comes with it
A couple new apps added to AndroidApps folder:
rpierce99's app GetLogs
Titanium Backup
Caveats:
BT - works! But audio doesn't route. See this thread if you're feeling adventurous and want to play with/don't mind using some unstable/incomplete code...
After booting, TOPA seems to have a crippling issue where if the first call is inbound, the phone reboots. So I guess after booting make an outbound call and everything is fine? Someone please confirm...
That audio routing thread is in the RHOD section, and I've only tested it on a RHOD - but AFAIK it should work on other devices. Let me know.
Whew, here you go TOPA folk!
I figured you guys needed a thread for this, if only to track issues that are TOPA-specific. Let me know what I need to add in the caveat section for TOPA! Also let me know if ts-calibration file is good or not .
Also, if you guys already have FRX07 running/working... there's nothing new here. Mainly using this thread as a place for newbie's to go and you experienced folk to help me track issues again for new users!
I have a small problem,when I run haret it comes to animated logo and then my phone go to rebote?
Every time when is starting FRX07 the mobile reboot and start's windows?. Where is the problem?...
kujrv1 said:
Every time when is starting FRX07 the mobile reboot and start's windows?. Where is the problem?...
Click to expand...
Click to collapse
Yes,that's right...
And solution...?
Use the latest kernel and rootfs, not the ones bundled with frx07.
kujrv1 said:
And solution...?
Click to expand...
Click to collapse
kujrv1 said:
Every time when is starting FRX07 the mobile reboot and start's windows?. Where is the problem?...
Click to expand...
Click to collapse
hb5 said:
I have a small problem,when I run haret it comes to animated logo and then my phone go to rebote?
Click to expand...
Click to collapse
Sorry guys grab the latest kernel. I just put that in the caveat list, thanks.
I put the last kernel and i have the same issue. Reboot on Animated logo
I too have the reboot issue on animated start screen. Latest kernel used.
Any suggestions??
last three kernels didn't work on my topa100
it runs haret and then reboot the device
Will you guy's please make an effort and read other posts on this topic instead of clogging up the forum.
Everything you need to know has been posted already, multiple times.
Zaknahhas said:
last three kernels didn't work on my topa100
it runs haret and then reboot the device
Click to expand...
Click to collapse
gtti148 said:
I too have the reboot issue on animated start screen. Latest kernel used.
Any suggestions??
Click to expand...
Click to collapse
kujrv1 said:
I put the last kernel and i have the same issue. Reboot on Animated logo
Click to expand...
Click to collapse
Wait...
zooster said:
Use the latest kernel and rootfs, not the ones bundled with frx07.
Click to expand...
Click to collapse
Seems to make me think it's working on the newest rootfs and kernel - is this not true?
arrrghhh said:
Seems to make me think it's working on the newest rootfs and kernel - is this not true?
Click to expand...
Click to collapse
I've been switching my TOPA to FRX07 + .27 + rootfs (all selfbuilt) yesterday, and it boots up fine since the latest kernel fix.
So anything reported not working with latest autobuild kernel implies user error for me if it resets during bootanimation.
arrrghhh, thanks for taking care of the topa threads! So I can concentrate on not getting anything done for .35
Michael
arrrghhh said:
Wait...
Seems to make me think it's working on the newest rootfs and kernel - is this not true?
Click to expand...
Click to collapse
Topaz can boot with last kernel, with htc-msm-linux @ 20110718_223029 it doesn't.
zooster said:
Topaz can boot with last kernel, with htc-msm-linux @ 20110718_223029 it doesn't.
Click to expand...
Click to collapse
20110718_223029 is the latest kernel tho... are you saying emwe is lying? .
emwe - perhaps you should be like us heathens and try to run the pre-compiled binaries? I know, blasphemy...
Hi to all, is 2 day frx7 work in my topaz all work bt, wifi, 3g, lokscreen, rotate screen (no good) photo, opera, sms, gps an battery when is 10% work 6 hour, is speed. i like use android. thanks
Introduction
Teamhacksung (the rest of them really!) has been porting ICS (to be CM9) for the Galaxy S and they feel that it has reached a state where it would benefit from public testing. However this is still a very early versions and there will be bugs. Bug reports are allowed in this thread only. Please check the known issues section before reporting a bug. The most minor bugs are welcomed (we'd love to know them, but we may not fix them instantly).
Download
ROM: BUILD 17: androtransfer.com / Mediafire
Google Apps: Download from ROM Manager. (Or http://goo-inside.me/gapps/gapps-ics...213-signed.zip)
Google Apps Fixer: MultiUpload / tux-head.net / faramir.eriador.org (md5: af8bcaf5f8158e8e1be7097fc86b6b28)
Google Apps Fixer will fix your problem with not being able to add Google Account or Calendar Sync, but will also reset your Google Apps data. Only flash if you're having problems. If Google Apps Fixer does not work for you, do a factory reset from CWM (or Android Settings) and do not restore system data via TitaniumBackup.
Older Downloads
ROM
Build 16B: Mediafire
Google Apps
v7.1: MultiUpload / tux-head.net / faramir.eriador.org (md5: 8bf66137f18de45657f29c129a8f4d52)
v7: MultiUpload / tux-head.net / faramir.eriador.org (md5: 1888fbb15f36a076cb3908acaf1bd15a)
v6: MultiUpload / tux-head.net / faramir.eriador.org (md5: 6f51ded731d173c31b8c47395ca580b7)
v5.3: MultiUpload / tux-head.net / faramir.eriador.org (md5: e7d69d98a633b646e4f14e6a43208e66)
v5.1: MultiUpload / tux-head.net (thanks! Kaik541) (md5: 87415730a1db2e90d3588bc895f239e5)
v5: MultiUpload (thanks! Kaik541) (md5: 8667c9ddca581a98867fc02db29a2326)
v4: MultiUpload (thanks! Kaik541) (No longer include apps downloadable from Market.) (md5: 8b2dad009bc2f8724d27f78bca162495)
v3: internal
v2: MultiUpload (thanks! koush)
v1: MultiUpload (thanks! koush)
Installation
- First time flashing ICS to your Vibrant (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
WIPE again or Calendar Sync will not work.
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Coming from onecosmic's ICS build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Reboot into recovery and WIPE (wipe data/factory reset + wipe cache partition)
If radio doesn't work, go back to Samsung ROM and flash from there.
- Upgrading from another build of ICS by teamhacksung?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery.
Source
Kernel Source: https://github.com/teamhacksung/samsung-kernel-aries
Userspace Source: Patches are being integrated into CM's mainline tree. Device tree is available on teamhacksung's GitHub, but may not be buildable. No support for the source code, do not post that you are not able to build it.
Known Issues
Camera does not support scene modes
Phone unnecessarily gets data connection on device encryption password enter screen.
Cannot format external SD *
Android OS battery usage display higher than normal.
Sometime wrong SMS selected for forwarding
Format internal instead of external SD when requested to format ext. SD
Transfer speed slows down when screen off
Screenshot shutter sound
TV Out using HW-decoding (probably won't be fixed)
Sim Toolkit (probably won't be fixed)
No camera focus mode setting
Compass doesn't work in Google Maps v6
Unable to dial "0001" in some regions
Slow USB transfer speed for some people
Camera still photos problem after recording video
Top of widget selection selector says "Select screen lock"
Note: there are a lot of new options in Settings, but many of them are not implemented yet. DO NOT REPORT THEM AS BUGS. Additionally, some users has reported boot failure after disabling boot animation.
Empty wifi icon when using juice defender / sometimes on boot
Unused bottom bar in landscape dialer
Send contact to voicemail doesn't work
911/E911 is unknown, one report of weirdness
Fixed Issues
BUILD 17
Top of widget selection selector says "Select screen lock" (Upstream fix)
Chrome not working
Various other upstream fixes
BUILD 16
Regression in BUILD 15: Superuser application crashes
Regression in BUILD 15: Data Roaming enabled by default
Back camera does not record geotagging
Camera crashes when changing resolution
New: WM8994 Extensions (aka "Voodoo Sound") is now configurable from DSP Manager
BUILD 15
Duplicate entries in MediaScanner (will only prevent new duplicates, need to clear data to get rid of old duplicates)
Regression in BUILD 14: Screen flicker while turning off
Regression in BUILD 14: adb turns off every reboot
Mute-unmute needed on some calls (hopefully)
Notification power widget uncustomizable (now integrated into Settings)
Reboot into recovery on crash (it will still reboot, just not into recovery)
Unreliable Wi-Fi on screen off (hopefully)
Gallery face glow FCs
BUILD 14
Laggy video recording in low light
"sin" does not work in calculator in Spanish
Laggy playback of some video in .mkv container (same video works in the .mp4 container) (Recommendation: Dice Player from market. Does its own mkv extraction and has hw decoding support)
New Feature: Gamma tuning (equivalent to Voodoo Color's "v1 gamma hack")
BUILD 13
720p Video Recording laggy
No camera zoom
Timelapse video recording crashes
TV Out broken on sleep
TV Out black video
Broken encryption (regression in BUILD 11) (WARNING: users with already encrypted phone will have their data cleared (for real this time))
BUILD 12
Compass, accelerometer broken in certain apps
Random force closes (hopefully)
Missing camera touch to focus (thanks to havlenapetr)
GPS does not work (regression in BUILD 11)
Off-charging does not show progress
/datadata cache not cleared when space is low
Slow mass storage transfer speed
Automatic brightness not working
GApps v7.1
Network location broken
GApps v7
Market purchase broken
BUILD 11
Encryption not working without a data wipe (WARNING: users with already encrypted phone will have their data cleared)
Cannot authenticate new apps for root
Data sometimes get disabled on boot
GApps v6 / Face Unlock v6
Updated: based on IML74K
Face Unlock not working on BUILD 10+
BUILD 10
No hardware composition (but hardware acceleration works)
Video recording does not work.
Video playback is not hardware-accelerated.
The front camera produces distorted preview.
Photo taking does not work with the front camera.
Some camera options FC. (The camera is a temporary hack, when the Nexus S ICS source is released, there will be a proper fix.)
Movie Studio does not work.
WiFi automatically turns on after quitting airplane mode if WiFi was used during airplane mode.
Data Roaming is enabled by default
Can select widget on launcher without being on the widget screen *
GApps v5.3
Updated: Market apk
Removed: unneeded GoogleLatinIME
BUILD 9
WPA Wifi Tethering broken (regression in BUILD 8)
Audio recording by android app crashes (phone calls still work) (regression in BUILD 8)
Phone crashes in landscape with T9 enabled
Reboot to recovery by default even though recovery not selected.
Slow T9 speed
CPU rarely scaling up to 1000 MHz
GMail sometimes fills up /datadata with attachments
BUILD 8
USB Tethering on Windows requires the user go to to driver update and manually select the RNDIS driver.
Sketchy wifi tether (breaks if data connection comes up while tether is active) (it will still error, but you can now re-enable it)
Mounting external SD via USB broke in BUILD 7
Cannot accept many file types via bluetooth
Data activity icon sometimes gets stuck even data is off.
New feature: T9 Dialing by devatwork (Enable in Dialer Setting)
BUILD 7
Cannot encrypt phone after restoring data.
Wi-Fi problems for Iran users
Market download temporarily goes to /datadata
Support for TV Out (in Galaxy S Setting application)
Screen appearing for a split second after screen off animation
BUILD 6
Persistent "Removed SD card" message on external sd card removal.
Missing library for Android Open Accessory
Support for USB Mass Storage (see FAQ)
BUILD 5
VPN does not work
Regression in device encryption
BUILD 4
Large photos cannot be edited.
Missing Live Wallpapers
Bluetooth Reverse Tether does not work
Wi-Fi Direct not supported (it's supported in settings now, but apps are needed to use it as ICS does not come with any use-case for Wi-Fi direct)
Sometimes wifi strength won't show after boot if wifi is enabled. Toggle once to fix. (fixed, hopefully)
GApps v5.1
GApps: Missing TTS libs
GApps v5
GApps: Missing Picasa Sync
GApps: Unable to purchase apps
Build 3
Device encryption does not work. (Note: temporarily broken again in BUILD 4, works on BUILD 5)
User does not have write permission for external sd
A2DP bluetooth headsets do not work.
GApps v4
GApps: More missing libs for GoogleTTS
Build 2
Superuser.apk does not open.
Installer does not work on Samsung ROMs.
Factory reset (from settings menu) does not clear /datadata.
GApps v2
GApps: Missing voice chat, maps, text-to-speech libraries
GApps: Android Keyboard appears twice in Settings.
Frequently Asked Questions
My calendar sync isn't working!
Install the latest build and gapps and gapps fixer. If it still doesn't work, wipe your data.
App X isn't working!
Check the list at http://forum.xda-developers.com/show....php?t=1402210 (unaffiliated with teamhacksung) first and check if it works on other ICS phones. Most likely, it's the application's problem, not ours.
Can I mount the phone as mass storage via USB?
Starting from BUILD12, mass storage is the default configuration (might not apply to existing installations). The below command can be used to change into USB Mass Storage mode. USB Mass Storage mode is always used in recovery.
Code:
setprop persist.sys.usb.config mass_storage,adb
If you want to switch to MTP mode use
Code:
setprop persist.sys.usb.config mtp,adb
Please reboot after executing the command.
I can't adb into the phone!
Please install Nexus S drivers from Google. (Or Galaxy Nexus's driver in MTP mode)
Can I flash other modems?
You may flash modem packages designed for CM7.
How do I take a screenshot?
The screenshot taking function is built into ICS. Hold volume down + power.
Can I use CM7 kernels?
No, the kernel has modifications to make graphics, camera, data counter and data limit work.
Can I disable LED Notification?
Yes. Untick Settings -> Display -> Pulse notification light.
Maps keeps asking me to sign in even though I'm signed in!
Ignore the sign in dialog and pull down the notification menu. Answer the request for permission. Do this a few times and Maps will work.
How do I enter Galaxy S Settings (Device Settings)?
Type "am start com.cyanogenmod.AriesParts/.AriesParts" from adb. Or starting from BUILD 7, it is available as an icon in your launcher.
Is there a Captivate version?
A captivate build from the same source (but with captivate config) is available here.
What's working? Why is there only a list of issues?
Everything else not listed are supposed to be working (aside from the usual CM7 bugs). If they're not listed, please post so that they can be added to the list of issues. A list of issues is far more useful from a development standpoint.
Why am I getting notified that my data partition is getting full when I have 1+ GB free?
Your /datadata partition, a smaller partition, is getting full.
I want to install gazillion apps on my phone and /datadata is too small
Run the following and datadata will no longer be used on next reboot. Your phone might become slower though.
Code:
touch /datadata/.nodatadata
IRC?
#cmsgs on freenode
My adb shell isn't root!
Run "adb root" to restart adb in root mode.
Why is "Android OS" battery usage so high?
It's just a reporting change in ICS. Android OS now includes battery usage from more components than in Gingerbread, the actual battery drain is the same.
What is "Random Offset" during installation?
It's just a harmless message given as a verbose logging due to the new ASLR security feature in ICS. It is not an error.
How do I get the latest version of Rom Manager without market?
If the bundled version doesn't work, update from http://download.clockworkmod.com/rec...RomManager.apk.
I would like feature X
This thread is not the place for it. Submit it to the CM bug tracker once an official RC is released.
Thanks
syndtr: Updated touch and graphics driver
onecosmic: Being the first to successfully build the AOSP tree
Kaik541: GApps from v3 onward
ancdix: For hosting on tux-head.net
nikademus (_renaud_): For hosting on faramir.eriador.org
SysTem-X: For hosting on ics.haxer.org
sixstringsg: For hosting on androtransfer.com
CyanogenMod team: Setting up the infrastructure and being a great help in the porting process.
sixstringsg, TkGlitch, and Skitz: Helping me get GPS going on ICS.
Team ICS Passion: This build uses a gpsd blob they found for their ROM from older versions of CM7.
and everyone else involved in this port or CM7 for SGS.
Reserved. *10 char*
thanks FaultException. was waiting on six to bring us Build 16, going to give it a try later when i get home, thank for this and the good work you are doing on cm7.
thanks will try tomorrow
Thank
Thanks FE and wish you all best.
Thanx man...will flash this.
What is the stock kernel the rom comes with???
krackerjac said:
What is the stock kernel the rom comes with???
Click to expand...
Click to collapse
It's the standard Aries CM kernel.
Thanks again FaultException for your time and effort which I know the Vib community here appreciates it 800% !
Fault Exception is there any way you could committ the yagf2 GPS fix in to this rom. It makes a huge difference in GPS lock speed over stock.
hurtz777 said:
Fault Exception is there any way you could committ the yagf2 GPS fix in to this from. It makes a huge difference in GPS lock speed over stock.
Click to expand...
Click to collapse
The what? You'll have to give me a link.
FaultException said:
The what? You'll have to give me a link.
Click to expand...
Click to collapse
I think this http://forum.xda-developers.com/showpost.php?p=19869399&postcount=1
Yeah that is the link to it. It makes a world of difference on GPS locks and accuracy.
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
daffyno said:
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
Click to expand...
Click to collapse
From what rom you came from.i came from cm7 and ended up in a bootloop..wander what im doing wrong.
Edit* if you end up in a bootloop all you have to do is pullthe battery.enter the clockworkmode useng three button combo.reinstall.done.
Sent from my SGH-T959 using XDA App
daffyno said:
the usual gps problem....
it works good first time...then no more and doesnot go in ds too...
damn vibrant first stock!
Click to expand...
Click to collapse
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
nuwanmw1988 said:
From what rom you came from.i came from cm7 and ended up in a bootloop..wander what im doing wrong.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
another ics rom
chui101 said:
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
Click to expand...
Click to collapse
the same...
hurtz777 said:
Yeah that is the link to it. It makes a world of difference on GPS locks and accuracy.
Click to expand...
Click to collapse
I'll look into it. If it does make that much of a difference, and I have permission from the authors, I'll throw it in CM9 and 7.
Dougfresh said:
Thanks again FaultException for your time and effort which I know the Vib community here appreciates it 800% !
Click to expand...
Click to collapse
+1 that's right
Sent from my SGH-T959 using xda premium
chui101 said:
Can you try using yagf2 + http://forum.xda-developers.com/showpost.php?p=22119563&postcount=80 ?
Click to expand...
Click to collapse
If u flash that file it works on this rom. I am using this rom and I flashed the GPS fix and I get a GPS lock.
Sent from my SGH-T959 using XDA App
Welcome to the support thread of EternityProject's CM10.1 (CM10.1 EPRJ)!
[ROM]EternityProject's CyanogenMod 10.1 for LG Optimus 4X HDhttp://forum.xda-developers.com/showthread.php?t=2123602
What is this thread for:
Here you can report all your problems of the EternityProject's CM10.1 ROM that you have and ask for help to see if it's solvable by others methods that doesn't include posting to the original rom thread.
This thread will be easier for him than look for all reports spreaded in the many pages of his thread, but remember, avoid flood!
Before adding your problem(s):
- Be sure to use the latest version of CM10.1!
- Be sure that your report is not already reported by someone, so use the search button.
FAQ:
Q: I'm getting low scores on AnTuTu and Quadrant. What can I do?
A: Disable "Use GPU for 2d apps" under development settings.
Q: How can I open development settings?
A: In About Phone > Settings, press Build Number 8 times.
Let's help kholk and dexter build a stable CM10.1. Thank them!!
BUG LIST:
Confirmed
- Hotspot (doesn't work for both secured or open settings, wifi is stuck at OFF state after attempt to turn on hotspot, work again after reboot) (kholk)
- extsd (root permission is denied) (kholk)
- swipe gesture in aosp keyboard FC keyboard (BUT normal typing has no problem) (kholk)
- mic on Google Now FC the app (kholk)
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (o4i, musklor and Capozz)
- Bluetooth not really working (kholk)
- External SD is accessible only as root (kholk)
- I forgot to enable mass storage mode, so only adb is working. I'll enable it in the next release. (kholk)
- Hotspot can't still work because I didn't even configure it. I'll be sincere: I totally forgot to xD (kholk)
- Dear kholk, you forgot to include a library called libnvcap_video.so: why the hell did you? (kholk)
- installation of purchased apps from market fails (NEW)
Needs confirmation
- No option for USB connection mode (Mikey94)
- Camera no autofocus when hitting the trigger (Mikey94)
- Apps that try to install itselves to the sd card fail miserably, probably related to sdcard access. Some failing apps: Fancy widgets unlocker, ADWLauncher Ex, Exchange by TouchDown Key (ircalf)
- When connected to a wi-fi with no internet connection, mobile data doesn't take over, leaving the phone offline (ircalf)
Fixed
- Vibration (kholk)
- root doesn't work (kholk)
- NFC (the option is not present under settings) (kholk)
- Screen brightness changes inadvertently (still can't point out the reason or pattern) (ircalf)
- Leaving the brigthness to auto renders the screen very dark (ircalf)
TIPS:
- This build is still BETA. So you can, and probably will, find bugs. If so, please report here so I can update this thread and make Kholk's life easier.
- http://forum.xda-developers.com/showpost.php?p=37342594&postcount=79
- No NFC in settings (always activated??)
- No option for USB connection mode
- Camera no autofocus when hitting the trigger
all from kholk:
29/01/2013: Bluetooth not really working
29/01/2013: External SD is accessible only as root
- I forgot to enable mass storage mode, so only adb is working. I'll enable it in the next release.
- Hotspot can't still work because I didn't even configure it. I'll be sincere: I totally forgot to xD
- Dear kholk, you forgot to include a library called libnvcap_video.so: why the hell did you?
Re: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
Why no developer settings?
Sent from my LG-P880 using xda app-developers app
Question: Is it best to install this over a fresh kdz or will installing it over CustoNexus work just as well once cache/data/etc. are wiped in recovery?
Emin3ms said:
Why no developer settings?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
From Dexter_nlb: "in about phone settings, press build number 8 times"
AlderCass said:
Question: Is it best to install this over a fresh kdz or will installing it over CustoNexus work just as well once cache/data/etc. are wiped in recovery?
Click to expand...
Click to collapse
Idk, I installed from my kdz.
For Kholk: 3G network does not work (provider Wind, Italy)
AW: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
I have a big Problem with mobile data and mobile connection!
My provider is three (3 Austria) and problem is following (same problem was also with dexters rom): the signal is kinda low, my phone automatically connect to t-mobile austria...and at the statusbar there is a "R" which stands for roaming, so there is no more internet connection!
With stock V10H i never had this problem!
Any solutions? am i the only person with this problem?
Sent from my LG-P880 using xda app-developers app
Anyone else having trouble reinstalling previously purchased apps? I get an error something along the lines of "cannot install to usb storage or SD card", and it only happens on my purchased apps, no problems installing any free apps. I Googled the error and none of the answers (of which there were a few) worked, such as clearing cache/data for the Google Play app, or installing the apps while the SD card is unmounted, another proposed solution is to delete smdl2tmp1.asec which I can't get at because I can't get root working yet
Speaking of root, superuser's info screen is reporting "note: your su binary cannot be updated due to its location"
Also, I've figured out how to add/remove lock screen widgets but I can't figure out how to get rid of the camera one? -edit- got rid of the lock screen camera with an app called Lockscreen Policy
SD card doesn't seem to be recognised at all (see attachment), tried unmounting and remounting, removing and reinserting, rebooting, no luck
Recovered CustoNexus for regular day's use tomorrow, will do some more "constructive breaking" of CM10.1 tomorrow evening.
AlderCass said:
Anyone else having trouble reinstalling previously purchased apps? I get an error something along the lines of "cannot install to usb storage or SD card", and it only happens on my purchased apps, no problems installing any free apps. I Googled the error and none of the answers (of which there were a few) worked, such as clearing cache/data for the Google Play app, or installing the apps while the SD card is unmounted, another proposed solution is to delete smdl2tmp1.asec which I can't get at because I can't get root working yet
Speaking of root, superuser's info screen is reporting "note: your su binary cannot be updated due to its location"
Also, I've figured out how to add/remove lock screen widgets but I can't figure out how to get rid of the camera one? -edit- got rid of the lock screen camera with an app called Lockscreen Policy
SD card doesn't seem to be recognised at all (see attachment), tried unmounting and remounting, removing and reinserting, rebooting, no luck
Recovered CustoNexus for regular day's use tomorrow, will do some more "constructive breaking" of CM10.1 tomorrow evening.
Click to expand...
Click to collapse
It's a known bug. We have to wait kholk's release a new build.
Another bug:
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (T-Mobile PL)
Re: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
The alarm clock just rang 2 timessage and softbrick the phone, needing to refresh kdz, then I noticed a huge battery drain from this issue.
Enviado desde mi LG-P880 usando Tapatalk 2
AW: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
AlderCass said:
Anyone else having trouble reinstalling previously purchased apps? I get an error something along the lines of "cannot install to usb storage or SD card", and it only happens on my purchased apps, no problems installing any free apps. I Googled the error and none of the answers (of which there were a few) worked, such as clearing cache/data for the Google Play app, or installing the apps while the SD card is unmounted, another proposed solution is to delete smdl2tmp1.asec which I can't get at because I can't get root working yet
Speaking of root, superuser's info screen is reporting "note: your su binary cannot be updated due to its location"
Also, I've figured out how to add/remove lock screen widgets but I can't figure out how to get rid of the camera one? -edit- got rid of the lock screen camera with an app called Lockscreen Policy
SD card doesn't seem to be recognised at all (see attachment), tried unmounting and remounting, removing and reinserting, rebooting, no luck
Recovered CustoNexus for regular day's use tomorrow, will do some more "constructive breaking" of CM10.1 tomorrow evening.
Click to expand...
Click to collapse
I had that problem about the smdl2tmp1.asec ony galaxy ace. I had no root and I could only delete it when I connected to the over and deleted it there! I don't know if you can connect to the over yet,but it helped me!
Sent from my LG-P880 using xda app-developers app
o4i said:
Another bug:
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (T-Mobile PL)
Click to expand...
Click to collapse
Same bug with Dexter's ROM
good job, will try this rom soon, still newbie at android.:victory:
o4i said:
Another bug:
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (T-Mobile PL)
Click to expand...
Click to collapse
Same problem here
Is it right that i have to enable WIFI for 3G Network?
Where can i find the Sync settings?
R: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
Battery is at 67% after 2 hours of use (it was fully charged after booting this morning)
Sent from my LG-P880 using xda app-developers app
- Apps that try to install itselves to the sd card fail miserably, probably related to sdcard access. Some failing apps: Fancy widgets unlocker, ADWLauncher Ex, Exchange by TouchDown Key
- When connected to a wi-fi with no internet connection, mobile data doesn't take over, leaving the phone offline
- Screen brightness changes inadvertently (still can't point out the reason or pattern)
- Leaving the brigthness to auto renders the screen very dark
ircalf said:
- Apps that try to install itselves to the sd card fail miserably, probably related to sdcard access. Some failing apps: Fancy widgets unlocker, ADWLauncher Ex, Exchange by TouchDown Key
- When connected to a wi-fi with no internet connection, mobile data doesn't take over, leaving the phone offline
- Screen brightness changes inadvertently (still can't point out the reason or pattern)
- Leaving the brigthness to auto renders the screen very dark
Click to expand...
Click to collapse
I think light sensor is bugged.
Summarized Standard Disclaimer: use at your own risk. I use it at mine.
*Full wipe recommended if coming from another kitkat rom*
MAKE SURE TO HAVE A BROWSER APK. THERE IS NO MORE STOCK BROWSER. For firefox see below.
My personal build "Diamond Rom 4.4" is based on omnirom with the following additions:
CM Calculator (the newly redone one they're proud of)
CM File Manager
CM Wallpapers
Bash shell
Nano text editor
Powertop
Koush's full featured open source superuser (and it's INTEGRATED into settings :cyclops: )
Carbon rom blue balls wallpaper
Cyanogenmod port of 2 column settings adapted to Omni rom.
Omni floating window
I've added a few of my personal touches which include
Batter circle color changing: green 100%-51% yellow 50%-16% red 15%-0% This was my favorite I9000M framework-res mod that I've missed since switching to CM7.2 way back.
Killed lock screen music full screen (personal privacy thing when riding public transportation)
Disable android external storage management: messes with ext4 formatted hard drives or multi partitioned hard drives. Use the unix style mount command
Disable hardware keyboard on boot: disabled but not removed. You'll have to manually turn it on
Removed camera sounds
Disable SELinux at the kernel level. It's even disabled on my laptop/desktop at the kernel because it seems like it's more trouble than it's worth.
Put the dalvik cache in the cache partition. Don't waste the data partition for it. :cyclops:
And of course, comes bundled with my A1 kernel :cyclops:
Every thing I've tested: camera, youtube hd, sound, gps, usb otg(use manual mount command) etc work.
*Instructions*
First time flashing omni:
-Read second post FAQ and other important information.
-Flash TWRP (you can flash twrp over cwm from cwm if you're in that situation)
-Reboot into new recovery
-Make recovery backup (optional)
-Run Titanium Backup (highly recommended)
-Full wipe
-Format system partition
-Install ROM
-Install gapps
-Reboot :cyclops:
Subsequent flashes:
-Install ROM
Downloads
Mediafire Wifi download folder with md5sum file
Mediafire 3G download folder with md5sum file
Mediafire TMobile download folder with md5sum file
*Authorization to download is just a captcha. Simply enter the text in the picture or name the item being advertised in the picture.* Mediafire sure beats sh***y sites like uploaded.net or rapidgator
A1 Kernel (as its own download)
V1.9.2: Security fix made aware by cyanogenmod, specifically this. The commit message on my github has a copy and paste mistake. It should list both of those security flaws as patched instead of the same one twice. Oops :cyclops: Security fix comes with ALL roms June 28 and onwards.
3G/Wifi 6ff199d6c9037d222a70ec0c561c8028
TMobile a675fd353ad3ad7dbf8e6bf2109fa360
TWRP Recovery
2.7.1.0 Wifi 6c995325e749e7561893e398847b09a0
2.7.1.0 3G 8fa04be69d0faf3d9a134e829ddff680
2.7.1.0 Wifi July 8 a8d12c13aac7430a319369069d814e72
2.7.1.0 3G July 8 dc1c50622c29c621f29b95f4c53734ea
2.7.1.0 Wifi August 11 b2c21e8fd58dc38a9c8b7669031b84b1
2.7.1.0 3G August 11 9f48defe78391e63a9053cbd281f738f
2.7.1.0 TMobile August 11 87fb29c803a2e3a56d98a1475c5fce8f
2.8.0.0 Wifi cfdac70d0ccac34cf220887eab72f8b0
2.8.0.0 3G d7918eb397f54c484e04a6d5cb07945c
2.8.0.0 TMobile aaf7c6d2455ca32178ec846f5186c774
Newer versions of firefox explicitly disable flash on tegra2. Use my firefox mod which is just normal firefox with a hacked tegra2 blacklisting mechanism. Don't use the old firefox apk. It has unpatched security holes.
Changelog: omnirom gerrit
Sources: https://github.com/AAccount?tab=repositories Has my device trees as well as all the omni repos I forked with my additions.
Credits:
Kasper_h: helping to make 4.4 possible
pershoot: original device tree from CM10.1
Omni team: providing great starter rom and keeping it TF101 compatible
fred6681: original gapps package. I just removed the 4.4.2 check
Cyanogenmod team: rom extras like calculator, superuser, to fill in Omni's missing holes and 2 panel settings template.
XDA:DevDB Information
Omnirom+ 4.4 for Galaxy Tab 10.1, ROM for the Samsung Galaxy Tab 10.1
Contributors
AAccount
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Based On: Omni
Version Information
Status: Stable
Created 2014-10-12
Last Updated 2014-10-11
Known Issues:
Wifi signal indicator and speed indicator don't show up
No list of 3G APN. Write down your settings first
Bluetooth audio issues
Recovery adb doesn't start automatically. In recovery, go to Advanced --> ADB Sideload and start it. You can then cancel it if you don't want to use that. It just starts the recovery adb and will continue to run until you reboot. fixed thanks to twa_priv
Use another recovery for TMobile. Apparently the twrps I make can't boot on TMobile hardware even though it boots on my Wifi only.
FAQ
How do I get multi window: Settings-->(second) More --> App circle bar (check box) && --> Included apps (choose what you want available in multi window)
Yes you can flash TWRP over CWM
Random flickering: Try Settings-->Developer options -->Disable HW Overlays.
Can't install a very large quantity of apps: fix
Can't mount ext4 media: kill the e2fsck process assuming you safely removed the media before sticking into the tablet.
(Below this is optional)
(Android device manager does have legitimate uses. However, please read and consider the following paranoid but realistic fantasy:)
Completely disable android device manager: By only going to Settings->Security->Device administrators and un checking "Android Device Manager" this doesn't completely remove the ability for google to send in commands to your device. Go to the google play store through a web browser, choose android device manager, and try "ringing" your device. To my horror, my tablet started to ring as if it got a phone call. I don't find it acceptable that gapps gives google a way to setup a remote command and control operation. In any other operating system this is considered a back door or virus.
To close this back door install Xprivacy. Enable system apps to be modified. Look for the entry (should be highlghted in red to indicate a system app) "Google Account Manager, Google Backup Transport... (lots of items here) ...Google Services Framework". Check mark Notifications and open its menu. Check mark the items in red. These are cloud to device (c2d) permissions which do exactly what you think. While not necessary, disable identification too for good measure. This disabled the ring feature on my tablet which means android device manager should no longer be able to send in commands. I don't have the guts to try the device wipe feature but it should work too. Do not disable location otherwise google maps won't be able to find you which means no gps car navigation.
See this post about building from source. I use a different, simpler trick for prebuilt chromium binaries. Fear not, they are source built but only when there are real source changes. They're just recycled in between to save 90mins/build of time.
Downloading now!! Thanks for your work!!
Enviado desde mi GT-I9195 mediante Tapatalk
Another 4.4.3 for the tab?
Thank you very much!
Hi AAccount,
thanks for your 4.4.3 ROM, sounds promising ... however, what about the graphical glitches on that vesion? I always went back to ROM version CM10.2/SGT7 as this seems to be the latest one without those glitches (last version I tried was Nameless ROM version 4.4.2 where they were still visible ... and annoying).
Thanks in advance,
mistersixt.
Great job!! Runs fast without bugs and glitches, only youtube HD...
The best kitkat rom!! Thanks !
Enviado desde mi GT-P7510 mediante Tapatalk
Best kitkat rom. I have some glitches. It is not as smooth as cm10.2 so i am going back to cm10.2.
What graphical glitches do you mean? I think ever since omni fixed the screenshot way back most graphical bugs have been ironed out. By youtube hd do you mean it doesn't play or can be laggy? If you mean laggy I read on wikipedia the GPU video decoding on the tegra2 sucks. That's a hardware problem.
3G build and new recovery coming later today. I cheated the chrome renderer build process by copying all the freshly done ones from the wifi only output folder.
My github is now fully up to date with all the appropriate omni repos forked with my personal touches whether it be the audio blob fixes or little things I like.
Sent from my GT-P7510
What are the flashing instructions? Is there a preferred gapps package?
Sent from my GT-P7510 using Tapatalk
AAccount said:
What graphical glitches do you mean?
Click to expand...
Click to collapse
With all ROMs starting with 4.3 it looks like if a flash of lightning goes from one corner to the other (my wife is saying it looks more like a scratch) for maybe 100 ms, this happens quite constantly though, every minute or something. Also, in some games like flappy bird the application gets stuck for maybe 100 to 200 ms completely (every 5 to 10 seconds maybe) before it continues, this makes playing games unpossible (temple run is another good example).
With 10.2/SGT7 this does not happen ... for whatever reason.
Regards, mistersixt.
lancem71 said:
What are the flashing instructions? Is there a preferred gapps package?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
I added instructions. There's no really preferred gapps package. I just like that one because it's the smallest one that gets the job done. There are some gapps packages that are bigger than the rom which I consider bloated.
mistersixt said:
With all ROMs starting with 4.3 it looks like if a flash of lightning goes from one corner to the other (my wife is saying it looks more like a scratch) for maybe 100 ms, this happens quite constantly though, every minute or something. Also, in some games like flappy bird the application gets stuck for maybe 100 to 200 ms completely (every 5 to 10 seconds maybe) before it continues, this makes playing games unpossible (temple run is another good example).
With 10.2/SGT7 this does not happen ... for whatever reason.
Regards, mistersixt.
Click to expand...
Click to collapse
I get these randomly sometimes but not often enough that I would consider it an issue. In angry birds it's an issue but if you go to Settings-->Developer Options check mark "Force GPU rendering" and "Disable HW overlays". Then you can play angry birds at least without the lightning.
And now for an important question
I have a script that puts /data/dalvik-cache on /cache/dalvik-cache as it was way back in android 2.2 froyo. Even though our tablet shipped with android 3.0 and my I9300 S3 shipped with android 4.0, Samsung seems to have been very sloppy and left the /cache partition huge to accomodate the froyo standard. This is a waste of space that will never be used. The cache paritition is 0.5GB. Is it OK if I include this script as a boot script? Is 0.5GB/500MB enough for most peoples' dalvik-cache? This will free up that space and add it to the internal sd card.
Great room, thanks! Everything working OK during the first hour of use
Sent from my GT-P7500 using XDA Free mobile app
Thanks for posting this! Great ROM. Only problem I'm having is the APN settings are blank for my 3G tablet (P7500). I input them manually and everything works, but normally they are preset.
AAccount said:
I get these randomly sometimes but not often enough that I would consider it an issue. In angry birds it's an issue but if you go to Settings-->Developer Options check mark "Force GPU rendering" and "Disable HW overlays". Then you can play angry birds at least without the lightning.
And now for an important question
I have a script that puts /data/dalvik-cache on /cache/dalvik-cache as it was way back in android 2.2 froyo. Even though our tablet shipped with android 3.0 and my I9300 S3 shipped with android 4.0, Samsung seems to have been very sloppy and left the /cache partition huge to accomodate the froyo standard. This is a waste of space that will never be used. The cache paritition is 0.5GB. Is it OK if I include this script as a boot script? Is 0.5GB/500MB enough for most peoples' dalvik-cache? This will free up that space and add it to the internal sd card.
Click to expand...
Click to collapse
Many thanks for this!
"Disable HW overlays"- for some reason this setting does not stick between reboots (not your ROM problem- it happens in all devices that I've ever seen). Is there a way to apply it automatically during or after boot? Such as in a script, or init settings etc?
Regarding the Dalvik cache, is there a way to know how much space all my installed apps + system are currently using?
jaibar said:
Regarding the Dalvik cache, is there a way to know how much space all my installed apps + system are currently using?
Click to expand...
Click to collapse
Go to the CM File Manager --> Settings --> General Settings -> Compute folder statistics and check mark that box. Also in the same area be sure to set access mode to prompt user mode or root access mode. Then, go to /data and hold dalvik-cache folder until get a menu and choose properties. The size will show up under "Size: ". Mine is 208mb.
AAccount said:
Go to the CM File Manager --> Settings --> General Settings -> Compute folder statistics and check mark that box. Also in the same area be sure to set access mode to prompt user mode or root access mode. Then, go to /data and hold dalvik-cache folder until get a menu and choose properties. The size will show up under "Size: ". Mine is 208mb.
Click to expand...
Click to collapse
238MB here. Maybe a quick poll can help gather info on how much allocation must users are using?
Sent from my GT-P7510 using Tapatalk
jaibar said:
238MB here. Maybe a quick poll can help gather info on how much allocation must users are using?
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Same around 2xx mb. I'm fine with it, since the 400mb in /cache is wasted anyway.
Sent from my GT-P7500 using Tapatalk
223MB here
Is Netflix working on this ROM. Asking because there is problems on the Nameless ROM.
Sendt fra min GT-I9305 med Tapatalk
thra1982 said:
Is Netflix working on this ROM. Asking because there is problems on the Nameless ROM.
Click to expand...
Click to collapse
Every time somebody asks about Netflix... I fell I'm missing something big...
This is an unofficial build of LineageOS 16.0 for the Motorola razr I, (XT890/SMI).
Lots of thanks to Hazou. This rom is based on his los-14 rom and I got help from him with los-16.
This rom has full hardware support and should run stable. It has been tested by me in daily use. I'm using the rom without google apps, but with microg. Installing google apps requires some apps to move to data partition because of limited system size. See install description for more info.
Special Features
-All features of Hazous 14.1 rom
-MicroG signature spoofing patch is included.
-Adaptive icons can be disabled in homescreen settings.
I can include more features if requested
Known Bugs
-The camera preview image sometimes shakes at random
Download
https://mega.nz/#F!5fBWlIAQ!Jlq9Bj789iJ0iIIptK00tg
Update
If you already run an earlier version of this rom, just boot to twrp and install the latest flashable zip file
Install
1. Backup everything you don't want to loose.
2. Download and install TWRP 3.2.3 (download in attachments. Can be flashed with fastboot or with another recovery)
3. If you come from another rom do a full wipe with twrp
4. Download and install the rom flashable zip (download from mega.nz link is in section download)
5. If you want to install opengapps or need system partition space for other things. Install the move_to_data.zip file from the attachments. This will move the Webview and the LatinIME app to data partition.
6. Choose one of the following options:
-either install google apps (download form https://opengapps.org/. Choose x86 9.0 nano or pico)
-or install MicroG (can be installed with the unofficial installer https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360) this is lighter in ram and cpu usage but you will get problems with google chrome and other apps
7. If you want root access install the addonsu-16.0-x86.zip (download in the attachments)
8. Reboot the phone. First reboot will take some time
Changelog
Code:
20191018:
fixed problem with sms receiving
20191012:
mobile network connection works now after boot
Fixed problems with network switching
Show taps option is working now
intel art extension enabled
Call recording enabled
text relocation warnings disbaled
(untested) encryption. Needs special configuration (see below)
20190819:
SELinux is now enforcing
Notification access feature enabled
solved crashes with houdini emulated apps
20190713:
usb configuration works properly
battery light works now
July security patches
20190704:
first stable release of this rom
DATA Encryption
If you want to enable data encryption this would break the pds partition backup. To prevent this, the cache partition can be used as backup location:
-edit /system/bin/pdsbackup.sh
-change PDS_FILE=/data/misc/pds/pdsdata.img to PDS_FILE=/cache/misc/pds/pdsdata.img
-resize data partition in TWRP:
Code:
umount /data
umount /sdcard
e2fsck -f /dev/block/mmcblk0p17
resize2fs /dev/block/mmcblk0p17 1367079
-reboot the phone
XDA:DevDB Information
unonfficial LineageOS 16.0, ROM for the Motorola RAZR i
Contributors
julianwi, Hazou
Source Code: https://github.com/julianwi/android_device_motorola_smi/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-08-19
Created 2019-07-04
Last Updated 2019-08-19
This if I did not expect it, I'll try to see how it goes. Thank you.
Download links and install description are up now. Download from mega.nz because xda download section is broken at the moment. I'm waiting for your test reports
It's really great works, thank you!!
I quickly tried and found several points.
- USB connection with PC
All USB connection option including File Transfer, USB tethering, PTP are grayed out.
Disabling/Enabling android debug in setting didn't work.
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
- SElinux
Although it is designated as permissive in device.mk, it's actually worked as "disabled".
I'm not sure it's related or not, however, when building "user build", it's failed with "ERROR: permissive domains not allowed in user builds".
I know "user build" is not officially supported in Lineage release, however, it's really helpful if we can do it for AFW usage.
Previously I could use Lineage 14.1 smi build for AFW and safetynet app with user build.
BTW, performance is really great, seems to be almost same as Lineage 11.
dumkm said:
It's really great works, thank you!!
I quickly tried and found several points.
- USB connection with PC
All USB connection option including File Transfer, USB tethering, PTP are grayed out.
Disabling/Enabling android debug in setting didn't work.
Click to expand...
Click to collapse
I also noticed that. Will see how this can be fixed. It is just a problem with the option dialog. Usb connection works fine. As a workaround you can set a default USB configuration in developer options
dumkm said:
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
Click to expand...
Click to collapse
I have not tested storage encryption yet. Will have a look at it later
dumkm said:
- SElinux
Although it is designated as permissive in device.mk, it's actually worked as "disabled".
I'm not sure it's related or not, however, when building "user build", it's failed with "ERROR: permissive domains not allowed in user builds".
I know "user build" is not officially supported in Lineage release, however, it's really helpful if we can do it for AFW usage.
Previously I could use Lineage 14.1 smi build for AFW and safetynet app with user build.
Click to expand...
Click to collapse
I think lineage trust doesn't differentiate between permissive and disabled. Selinux support is planned for future releases
Thank you for quick check.
Regarding USB connection, I also confirmed that Ubuntu can recognize as external storage with above option, besides Windows still does not recognize. Maybe depending on my environment.
Also I noticed that Chrome, Chrome Beta and Chrome Canary (therefore another Chrome based apps such as Maps Go) always crash. This is also maybe my environment only, though. BTW, I could install MicroG, besides couldn't install OpenGapps 9.0 pico due to partition size limit.
Additionally, I couldn't find any LED settings, currently LED is always off during charge or any notification.
dumkm said:
Thank you for quick check.
Regarding USB connection, I also confirmed that Ubuntu can recognize as external storage with above option, besides Windows still does not recognize. Maybe depending on my environment.
Also I noticed that Chrome, Chrome Beta and Chrome Canary (therefore another Chrome based apps such as Maps Go) always crash. This is also maybe my environment only, though. BTW, I could install MicroG, besides couldn't install OpenGapps 9.0 pico due to partition size limit.
Additionally, I couldn't find any LED settings, currently LED is always off during charge or any notification.
Click to expand...
Click to collapse
Notification Led should work. Can be configured under settings->apps and notifications->notifications->notification light. I don't know what happened with the battery light. It will hopefully come back if I upgrade the driver to hidl.
Google Chrome is a known problem with MicroG. It requires official gapps. I will check if some of the unprivileged lineage apps can be moved to data partition to make place for google apps
Newbie question
Hi all, I know someone who's selling her old RAZR i XT890 and I'm interested (for experimental reasons but also the oddity that it's Intel powered). I've never owned a RAZR i so I've got some questions:
-The phone is from 2012 so quite old and has 1GB RAM, does it work well with this Lineage 16? Because usually newer software would perform bad on older SoC (I used to have iOS 7 on iPhone 4 back in the day and it was painfully slow compared to 6).
-On Lineage 16, can it run any Android app as a standard new Android Pie phone? I ask because this is an Intel x86 CPU, so can it still run Android apps as normal or are most of them only designed for ARM and therefore unusable?
If I get the good news, I may buy the phone and try this Lineage OS custom ROM.
Regarding LED, maybe it became working after modifying some option of notification light. Battery connection light is still always off.
Regarding opengapps, I moved webview and LatinIME from app directory to external SD in TWRP, then installed as normal app after system boot. Webview worked fine besides LatinIME always crash. I'm using different IME, so it's no problem. With this environment, opengapps nano can be installed, then Chrome, Maps and other google apps worked.
dumkm said:
Regarding LED, maybe it became working after modifying some option of notification light. Battery connection light is still always off.
Regarding opengapps, I moved webview and LatinIME from app directory to external SD in TWRP, then installed as normal app after system boot. Webview worked fine besides LatinIME always crash. I'm using different IME, so it's no problem. With this environment, opengapps nano can be installed, then Chrome, Maps and other google apps worked.
Click to expand...
Click to collapse
That's good. Than we can make a flashable zip to automatically move and symlink them to data partition.
I will provide a new build till end of the week with improved usb and notification LED implementation. I already got it working in my local setup
flameseewa said:
Hi all, I know someone who's selling her old RAZR i XT890 and I'm interested (for experimental reasons but also the oddity that it's Intel powered). I've never owned a RAZR i so I've got some questions:
-The phone is from 2012 so quite old and has 1GB RAM, does it work well with this Lineage 16? Because usually newer software would perform bad on older SoC (I used to have iOS 7 on iPhone 4 back in the day and it was painfully slow compared to 6).
-On Lineage 16, can it run any Android app as a standard new Android Pie phone? I ask because this is an Intel x86 CPU, so can it still run Android apps as normal or are most of them only designed for ARM and therefore unusable?
If I get the good news, I may buy the phone and try this Lineage OS custom ROM.
Click to expand...
Click to collapse
Newer android versions have been designed while keeping low ram devices in mind. Ram hungry special features like the picture in picture mode are excluded from builds for older device. So the situation is much better then on iOS. But a newer phone would run better thought.
Most android apps are available for x86. But some are still arm only and get automatically emulated. The intel houdini emulator integrates these apps natively into the system but they are a bit slower then x86 apps. These are for example Skype and a few unity based games
julianwi said:
Newer android versions have been designed while keeping low ram devices in mind. Ram hungry special features like the picture in picture mode are excluded from builds for older device. So the situation is much better then on iOS. But a newer phone would run better thought.
Most android apps are available for x86. But some are still arm only and get automatically emulated. The intel houdini emulator integrates these apps natively into the system but they are a bit slower then x86 apps. These are for example Skype and a few unity based games
Click to expand...
Click to collapse
Thanks for the response. So I should be alright with it then, hopefully. I just hope it won't lag on that old SoC. I'd love if you could upload a quick video of it in action.
TWRP error 70
julianwi said:
This is an unofficial build of LineageOS 16.0 for the Motorola razr I, (XT890/SMI).
Lots of thanks to Hazou. This rom is based on his los-14 rom and I got help from him with los-16.
This rom has full hardware support and should run stable. It has been tested by me in daily use. I'm using the rom without google apps, but with microg. I don't know how smooth it runs with official gapps.
Special Features
-All features of Hazous 14.1 rom
-MicroG signature spoofing patch is included.
-Adaptive icons can be disabled in homescreen settings.
I can include more features if requested
Known Bugs
-Mobile cell connection doesn't connect after boot. You have to turn airplane mode on and off to let it work.
-selinux is set to permissive for now (reduced security)
Please report more bugs if you test this rom
Install
1. Backup everything you don't want to loose.
2. Download and install TWRP 3.2.3 (download in attachments. Can be flashed with fastboot or with another recovery)
3. If you come from another rom do a full wipe with twrp
4. Download and install the rom flashable zip (download from mega.nz https://mega.nz/#!ICwXRC6D!VZqe3o5zeWbmMiZvka_BtUTW5T_V7_OdMS57Oe9CbMk)
5. Choose one of the following options:
-either install MicroG (can be installed with the unofficial installer https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360)
-or install google apps (download form https://opengapps.org/. Choose x86 9.0 pico)
6. If you want root access install the addonsu-16.0-x86.zip (download in the attachments)
7. Reboot the phone. First reboot will take some time
XDA:DevDB Information
unonfficial LineageOS 16.0, ROM for the Motorola RAZR i
Contributors
julianwi, Hazou
Source Code: https://github.com/julianwi/android_device_motorola_smi/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-07-04
Created 2019-07-04
Last Updated 2019-07-05
Click to expand...
Click to collapse
I've installed the OS without problems, but when i try to get GApps Pico or any other version TWRP prompt error 70. How should i proceed? There is any additional configuration needed?
Kazvko said:
I've installed the OS without problems, but when i try to get GApps Pico or any other version TWRP prompt error 70. How should i proceed? There is any additional configuration needed?
Click to expand...
Click to collapse
Yes, system partition size is limited on this phone. To install GApps some files need to be moved to data partition.
I created a flashable zip to automate this process. Take a look at the modified install description in the first post
New build is up now.
flameseewa said:
Thanks for the response. So I should be alright with it then, hopefully. I just hope it won't lag on that old SoC. I'd love if you could upload a quick video of it in action.
Click to expand...
Click to collapse
Sorry don't have enough time to make a video in the near future. Maybe someone else can record a video of it
I could confirm that notification LED and USB storage works fine with lineage-16.0-20190713-UNOFFICIAL-smi. Thanks.
Still WiFi with storage encryption does not work.
julianwi said:
New build is up now.
Sorry don't have enough time to make a video in the near future. Maybe someone else can record a video of it
Click to expand...
Click to collapse
Alright, thanks. I bought my friend's RAZR i and I am planning to use it as a daily driver with this ROM (I'm a light user anyway), I can't thank you enough for making this LineageOS for such an old device. I wonder if such a recent Lineage has been developed for the 2011 Atrix, haven't seen one.
I have questions though, firstly I've never used a custom ROM before, can I simply follow the instructions on this thread to get it working, or is there anything that has to be done beforehand like rooting? Secondly, are any other OSs successfully booting on this x86 phone, as I can't find it on XDA? (it surprisingly hasn't gotten much attention as a hackable device like HTC HD2 or Nokia N900 got).
dumkm said:
I could confirm that notification LED and USB storage works fine with lineage-16.0-20190713-UNOFFICIAL-smi. Thanks.
Still WiFi with storage encryption does not work.
Click to expand...
Click to collapse
I know, haven't looked at the storage encryption for now. It will maybe be in the next update next month
flameseewa said:
Alright, thanks. I bought my friend's RAZR i and I am planning to use it as a daily driver with this ROM (I'm a light user anyway), I can't thank you enough for making this LineageOS for such an old device. I wonder if such a recent Lineage has been developed for the 2011 Atrix, haven't seen one.
I have questions though, firstly I've never used a custom ROM before, can I simply follow the instructions on this thread to get it working, or is there anything that has to be done beforehand like rooting? Secondly, are any other OSs successfully booting on this x86 phone, as I can't find it on XDA? (it surprisingly hasn't gotten much attention as a hackable device like HTC HD2 or Nokia N900 got).
Click to expand...
Click to collapse
If the phone never had a custom rom yet, you have to unlock the bootloader first. Description is in this thread: https://forum.xda-developers.com/showthread.php?t=1928551
julianwi said:
If the phone never had a custom rom yet, you have to unlock the bootloader first. Description is in this thread: https://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
That's an old guide, will everything still work?
flameseewa said:
That's an old guide, will everything still work?
Click to expand...
Click to collapse
Yes, it should still work the same. If some links are outdated you can google them yourself
Thank you for bringing my old RAZR i back to life! I really appreciate the time and effort you spent for this obselete phone. Looking forward for more updates and for a bug free ROM. Using it now
dumkm said:
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
Click to expand...
Click to collapse
I'm not sure if I misunderstood but when you said "it required deleting....." and "reducing partition size of data", did you mean you can get WiFi to work if you do those things? I'm no expert at these but I can atleast apply the "fix" (if it really is) given that you guide me, if it's okay with you. Thanks!