I tried to install rosemary fonts in my turbo ... I flashed the zip with cwm recovery ... After flashing it , the phone got stuck on canvas turbo logo ... I tried to flash the stock rom .. Bt while connecting it to sp flash tool i removed out the usb when device was detecting in sp flash tool ... The phn is not starting up now... Led is also not glowing when i connect it to charging before connecting in sp flash tool charging was done ... Now the phn is juzz not starting up ... I took it to care center bt they are saying tht internal display is broken out and it costs more than 7k ... I cant understand thts it software or hardware issue ... Is my phone brick ? ... I juzz can't under tht what is happened to my phone .. Needed expert advice urgent ... Plzzz plzzz help out
Use "Format+Download" option in SPtools
SPtool us not detecting only now my phone
_yassh_ said:
SPtool us not detecting only now my phone
Click to expand...
Click to collapse
Reinstall drivers and try again.
I tried a lot ... Bt my phone is dead nd it's showing nothing
plzz help me out
battery removal.
_yassh_ said:
plzz help me out
Click to expand...
Click to collapse
.
I heard we can connect with simulating battery pulling or removing the battery any body no how to remove the battery
Factory reset your phone
Related
i try to install v 20G with smart flash and after the phone was connected start to loading ...
after 3-4 sec was disconnected and now is dead
is not connecting with USB, not start with charger ...
how can resolve this?
thank you
Wrong subforum.
sorry, please a moder to move it ...
If you flashed it with battery inside, you should be able to enter in S/W mode and reflash it but if you flashed without battery you have probably bricked it.It's also possible a hardware failure, like the motherboard.
i flashed with battery inside... allways i do this ... but this time not work ...
yonelkent said:
i flashed with battery inside... allways i do this ... but this time not work ...
Click to expand...
Click to collapse
It enters in S/W mode if you plugg it again?If not, could very much be a hardware failure.
No, it won't start ...
yonelkent said:
No, it won't start ...
Click to expand...
Click to collapse
This means hard brick or hardware failure.Take it to the service.
damn ...
try to see if atleast your pc recognises it in computer management
doesn't recognized ... i try on other pc and nothing ...
well then i guess your warranty card is your friend
was ... because i haven't ...
i guess now you should try to search the web or send it for repairs :/
Thread moved. In future if you post in the wrong forum, just use the report button at the top right of your post and ask for it to be moved as will be much quicker for us to get to.
Thanks
AvRS
Probably when you start the flashing with smart flash tool at the first second you move or touch your phone and usb connection cutted sft writing bootloader unfortunately.Before flash your phone put your phone a constant can not move and dont touch your usb cable and phone until flashing finish.
George Jetson said:
Probably when you start the flashing with smart flash tool at the first second you move or touch your phone and usb connection cutted sft writing bootloader unfortunately.Before flash your phone put your phone a constant can not move and dont touch your usb cable and phone until flashing finish.
Click to expand...
Click to collapse
that was the problem ... i have a very long USB and i think i touch him ... :| i was to service and they told me is dead because i start flashing with low voltage ... under 3 V ... They can make with JTAG , for rewrite boot or another thing on motherboard .
now i hope to be fine ...
Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
AmanNawaz said:
Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
Click to expand...
Click to collapse
dont panic ,
xiaomi has fastboot mode just restrt the phone and press power and vol down you will get into fastboot mode
before that just download the fastboot rom frm here,
http://en.miui.com/thread-14641-1-1.html
after downloading the rom ,download mi flash tool
after downloading everything just put your phone to fastboot mode
install mi flash tool on your pc/lap
just on top left ,you will find browse option
just go to the directory where you have unzipped the rom,chose the file
then connect your phone through usb cable it will get detected if not theres a button called refresh just press it and it will get detected
then just flash the rom, it will hardly take 90 secs to flash
now you have working mi3 with miui rom have fun
Sir can you help me on flashing ..on any social network site...canyou add me on fb
aman.nawaz.71
its a request ..plzzzz
Did you solve your prob? If not, PM me.
Stick on It....plzz anyone help :'(
i have already told you how to do it,why dont you simply follow the steps
Listen to zenr2 and do what he has suggested before hitting panic all over
all the best
Sent from my Nexus 5 using Tapatalk
Thanxx all gyzzzzz.....i have successfully recovered my phone
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
well thats good now have fun,and don't brick your device again
Thanx ZenR2 ...Bro You are simply just awesome
What is the Solution?
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
I am happy to know that you got your phone working again, but can you please tell where did you went wrong and what is the solution behind it. So that other's can know about it too.
Regards.
Ask ZenR2
While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
AlamX said:
While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Click to expand...
Click to collapse
Use flashtool, it should flash it with no issues. Google it and install the drivers. Download the ftf for your model (C6902, C6903, C6906, or the other one) and flash it. There's a guide on the forums, find it and read it.
AnrgKrshn said:
Use flashtool, it should flash it with no issues. Google it and install the drivers. Download the ftf for your model (C6902, C6903, C6906, or the other one) and flash it. There's a guide on the forums, find it and read it.
Click to expand...
Click to collapse
basic step and always working
Hello, today when i tried to install http://forum.xda-developers.com/showthread.php?p=48806481#post48806481 (CWM Recovery), i bricked my phone .
I have bootloop with samsung logo . I cant boot phone to normal mode or recovery . The "ARM9" and download modes are working.
I tried to install stock rom with odin, but its stucked on "setupConnection" step.
Is there any way how to fix & bring my phone to life again?
Thanks.
Please, help me . My battery will be soon dead :crying:
Do you have an older version of cwm on ur phone?
Switch off ur phone and try to boot into recovery..
Sent from my Micromax A110 using XDA Free mobile app
I cant .:laugh: boot into recovery ...
Minnimous said:
I cant .:laugh: boot into recovery ...
Click to expand...
Click to collapse
Hey,
Can you boot into download mode if it is yes you can use Odin to recover your phone.
JanniekM00 said:
Hey,
Can you boot into download mode if it is yes you can use Odin to recover your phone.
Click to expand...
Click to collapse
As you can see in first post, when i try to install stock ROM via Odin, it stops on step "setupConnection" .
Minnimous said:
As you can see in first post, when i try to install stock ROM via Odin, it stops on step "setupConnection" .
Click to expand...
Click to collapse
Use a another usb cable or use another computer
JanniekM00 said:
Use a another usb cable or use another computer
Click to expand...
Click to collapse
I tried it on Windows 8 , but it was not recognized (unknown device) and it wasnt in Odin, on windows 7 it was recognized bud stucked ... i dont have more computers. I tried 2 different cables , but none was original (i dont have original, so i tried cables from sony and prestigio.
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Minnimous said:
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Click to expand...
Click to collapse
If you can't fix your device via odin you need JTAG
Minnimous said:
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Click to expand...
Click to collapse
Have you got the Samsung's drivers installed on your computer? I assume you are using the corret Odin version, so let's go you can try it
Prepare you computer to use Odin and flash a new rom, remove battery and connect your galaxy ace to your computer. Then insert the battery holding VOLUME DOWN + POWER + HOME BUTTONS. Odin should detect your device, (Yellow rectangle) so you are ready ro START the process
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....
same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...
found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442
Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*
just use sp flash tool 5.142
Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz