hi, I am having a problem with my X2, it's completely blank
my X2 uttering a sound, but it can't show you a picture, I've tried to remove the battery, release memory card, then turn back my phone, but still can not display logo or any picture, only sound is heard but no picture,
there may have experienced the same problem as me ..
what I should do
please help me
arifliwa said:
hi, I am having a problem with my X2, it's completely blank
my X2 uttering a sound, but it can't show you a picture, I've tried to remove the battery, release memory card, then turn back my phone, but still can not display logo or any picture, only sound is heard but no picture,
there may have experienced the same problem as me ..
what I should do
please help me
Click to expand...
Click to collapse
Try factory reset.....
sagarpatre said:
Try factory reset.....
Click to expand...
Click to collapse
thank's for you're reply
I have reset my phone using the Lumia Recovery Software Tool 5.0.0, but there is still no display anything
Related
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
if you go the wiki page for this device it might help you out, or try searching google
shuman said:
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
Click to expand...
Click to collapse
try contacting GSLEON or Jockyw2001
Go here http://forum.xda-developers.com/showthread.php?t=393337 , download attached files and start from step 4
what kind rom are you using if its 6.0 then theres the problem flash to a 6.1 rom
How do I fix the rom 6.1? It is total dead seemz, not even power light! any help is much appreciated.
Did you try bootloader mode? Power+Camera+Soft reset button?
Kraize
I dont belive I tried the boot loader mode. I'll do that, however, what should I see if go into bootloader mode? what is the next step. Thanks everyone for their help, much appreciated.
No luck, I tried bootloader mode, same thing, all i get green power light and black screen!
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Hey,
any help with a Tri-colour screen problem?
other thing is, i can't tell where to read your reply from
Jerry
Hey,
can anyone help me with AT&T 8925 Tri-colour screen problem?
msn please @ [email protected] because I have no idea how to read the reply to this post, I'm new to all this..
It froze one day, soft reset and it came back in tri-screen. I plugged it into the charger and it worked..
Did that a few times now it won't do anything and it is stuck in tri-colour with:
KAIS1*0
SPL-1.93.000
CPLD-8
i didn't instal anything, it just locked up and not nothing I do, soft or hard reset will make it come back.
I also wanted to install an Australian OS to Telstra maybe, but not sure which ROM or RUU to download.
Can anyone help please, this is extremly important... and donations will be paid on completion of problem.
Thanks
jasonrush said:
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Click to expand...
Click to collapse
what if set can't conect with mtty and no conectivity with the pc and only green lights on the set?????
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
montreezy said:
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
Click to expand...
Click to collapse
Try following all these steps.
http://forum.xda-developers.com/showthread.php?t=433835
Ok so tonight i decided to update my phone with a few new apps, games, panels etc. Last thing i remember installing is the r3a camera. I go to run the camera and as i put auto flash on screen goes dead, completely blank. Leave it for ten minutes and still nothink, hold down power button and it made the noise it does when the power off notification comes up.
So naturally i removed the battery put it back in and turned it back on, but still nothing comes on screen.
Tried hard reset through pressing both buttons and power AND through pressing the stylus button located near battery. But nothing works!!
Please help quick!!
EDIT:: PROBLEM SOLVED!!
Albino3630 said:
EDIT:: PROBLEM SOLVED!!
Click to expand...
Click to collapse
How? What was the problem?
What he siad!
orelsi said:
How? What was the problem?
Click to expand...
Click to collapse
Battery was empty hahhaa
yhea what was the problem that you fixxed in 25 minuts??
Albino3630 said:
Ok so tonight i decided to update my phone with a few new apps, games, panels etc. Last thing i remember installing is the r3a camera. I go to run the camera and as i put auto flash on screen goes dead, completely blank. Leave it for ten minutes and still nothink, hold down power button and it made the noise it does when the power off notification comes up.
So naturally i removed the battery put it back in and turned it back on, but still nothing comes on screen.
Tried hard reset through pressing both buttons and power AND through pressing the stylus button located near battery. But nothing works!!
Please help quick!!
EDIT:: PROBLEM SOLVED!!
Click to expand...
Click to collapse
Please post how you fixed your problem, just in case someone else encounters the same.
Hey,
I had to replace the display, battery, mic and camera for my phone and now when i turn it on it shows the htc logo then it gets black and doesnt boot up, im able to boot into bootloader but if i choose recovery it does the same thing, gets black and doesnt boot.
Terramoto said:
Hey,
I had to replace the display, battery, mic and camera for my phone and now when i turn it on it shows the htc logo then it gets black and doesnt boot up, im able to boot into bootloader but if i choose recovery it does the same thing, gets black and doesnt boot.
Click to expand...
Click to collapse
If I were you, I'd use the RUU to reset everything back to stock. If it still doesn't work, then you've at least narrowed your issues down somewhat. I wrote a guide to RUU that might help, although you may have to adjust it to your particular situation: http://forum.xda-developers.com/spr...de-reset-phone-using-ruu-htcfastboot-t2876110
My P9 got a strange screen recently after a restart, only half of screen showing the UI (please refer to the attached photo). However, I am unable to unlock the phone (nothing happen when touching the screen). The most strange is, the phone can receive Email and phone calls but unable to make a call due to stuck in the same half screen. How to solve this problem?
I know there is nothing wrong with the hardware, just problem from the software side.
Try to force reboot by holding power button until it reboots
If persist, try going to default recovery and clear caches
Looks like the sensor.is. faulty
The screen looks like using the huawei flip cover
If you can access the settings then try to disable the flip cover settings,i just forgot where it is
FiKsTyLeR said:
Try to force reboot by holding power button until it reboots
If persist, try going to default recovery and clear caches
Looks like the sensor.is. faulty
The screen looks like using the huawei flip cover
If you can access the settings then try to disable the flip cover settings,i just forgot where it is
Click to expand...
Click to collapse
the point is, i cannot enter to the UI now, so nothing I can do with this.
tsuishui said:
the point is, i cannot enter to the UI now, so nothing I can do with this.
Click to expand...
Click to collapse
Last options is to factory reset
FiKsTyLeR said:
Last options is to factory reset
Click to expand...
Click to collapse
I will try to use a magnet to see if there is sensor problem, thanks anyway
Like FiKsTyLeR said try rebooting the phone by holding the power button for 10 seconds. Whent this doesn't work boot into recovery and wipe cache.
_Frostplexx_ said:
Like FiKsTyLeR said try rebooting the phone by holding the power button for 10 seconds. Whent this doesn't work boot into recovery and wipe cache.
Click to expand...
Click to collapse
Tried but the flip cover mode still exist.
I searched from internet that maybe the hall sensor is not working, possible to fix it?
What I want to do is copy all the files inside P9 to my computer.
If its a software problem and not hardware (like screen protector, broken sensor) you could try to simply roll back to marshmallow and update again to nougat.
Does the problem exist in fastboot mode, recovery, etc ?
so today i came home from school and wanted to turn on my wifi .. after pressing the power button the phone display started blinking on and off :/ .. it has no water damage and has never been dropped .. then i did s data wipe :| from the recovery mode . the display is working normally in the recovery mode but when i boot into system the display starts to blink on and off ..
p9_lite said:
so today i came home from school and wanted to turn on my wifi .. after pressing the power button the phone display started blinking on and off :/ .. it has no water damage and has never been dropped .. then i did s data wipe :| from the recovery mode . the display is working normally in the recovery mode but when i boot into system the display starts to blink on and off ..
Click to expand...
Click to collapse
i think u need to do a factory reset
sound like a firmware problem
what firmware are u on
Mine does some blinks when i'm getting in or out of the always on screen display mode, but not everytime. got it in more than 1 rom.
I don't have such issues on my SE.
[/COLOR]Dang it. I'm experiencing the same issue for the past few days with my Global ver. Mi8.
Any solutions?
Change to default theme
black187 said:
Change to default theme
Click to expand...
Click to collapse
This
Installed "dark mod" miui theme today and this resulted in a white strobe light screen after the first unlock attempt... No way to stop it's or access anything.
Slight panic since I'd seen threads about this issue and assumed it's hardware problem
Only way to stop it was a forced power off by long press of the power button.
Luckily on next boot the screen was working and I was able to Uninstall the theme again
Just when I was about to go to the service centre today, my phone becomes normal. Not sure why though.
How about you guys phone?
Trande said:
Just when I was about to go to the service centre today, my phone becomes normal. Not sure why though.
How about you guys phone?
Click to expand...
Click to collapse
And the problem has reappeared? I have had the same problem and from one day to the next it has been "fixed". I was going to process the guarantee ...
Trande said:
Just when I was about to go to the service centre today, my phone becomes normal. Not sure why though.
How about you guys phone?
Click to expand...
Click to collapse
The issue is with the theme, remove it and u'll be Gucci.