[RECOVERY][v500] TWRP 2.8.6.0 touch recovery [2015-03-27] - G Pad 8.3 Original Android Development

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG for 2.8.5.0:
-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements
CHANGELOG for 2.8.4.0:
-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
CHANGELOG for 2.8.3.0:
-MTP will now tell the host PC that storage is removed instead of disabling MTP completely
-MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
-Update and improve fix permissions and make fixing contexts optional
-Update SuperSU in TWRP to 2.40 and update install process
-Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
-Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
-Fix kernel panic during MTP start on some devices
-Support unicode fonts on devices with True Type Font support
-Fix slider value not showing sometimes (vibration settings page)
-Toggle MTP off during adb sideload to set correct USB IDs
-Reduce library requirements for 5.0 L decrypt
-Other minor fixes and improvements
Note: Starting with TWRP 2.8.2.0 and higher, adb sideload uses a new sideload method originally implemented in AOSP recovery. You will need the latest adb binaries to use sideload in these newer versions of TWRP. The version required is 1.0.32. You can find the version by running "adb version" on your computer. The new sideload feature no longer stores the zip on your device. Instead, a fuse file system is created in RAM and the zip is streamed from your computer. This puts less wear and tear on storage and ensures that large zips will not fill up all of your RAM. The sideload may spit an error on your PC side, but the zip should install just fine on your device.
CHANGELOG for 2.8.2.0:
-Pull in all changes from Android 5.0 lollipop into TWRP
-Add decrypt support for Android 5.0 lollipop encrypted partitions including automatic decrypt when the default_password is in use
-Revert some changes to exFAT that were breaking exFAT support on some devices
-Other minor fixes and updates
Note: At this time we do not have a GUI representation for pattern unlock. You can still decrypt patterns though by translating the pattern dots to numbers. The pattern dots correspond to numbers in the following pattern:
1 2 3
4 5 6
7 8 9
So an upper-case L would translate to a password of 14789 entered on the keyboard. Eventually we plan to add a proper pattern unlock to TWRP but it is a relatively low priority at this point.
Also note that you will need the latest adb binaries on your computer to sideload with this new version of TWRP.
CHANGELOG for 2.8.1.0:
-MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
-TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
-Temperature support - thanks to bigbiff
-Various other bugfixes and tweaks
CHANGELOG for 2.8.0.1:
-Fix a bug that causes weird graphics glitches and touch issues
CHANGELOG for 2.8.0.0:
-Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
-Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
-Add support for color in the console and give error, warning, and highlight lines different colors
-Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
-Improve handling of /misc thanks to mdmower
-Improve setting of time on Qualcomm devices thanks to [NUT]
-Allow using images on slidervalue GUI objects thanks to Tassadar
-Allow using variables and addition and subtraction in variables for easier theming
-Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
-Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
-Other minor fixes and improvements
Over the course of the last year or so, bigbiff has worked to migrate various Java functions from Android's MTP implementation to bring you a fully C++ based MTP implementation that allows you to transfer files to both emulated storage and Micro SD cards. It's confirmed to work on various Nexus devices but we may have to make some changes on other devices to keep Windows happy. Windows is very picky about USB IDs and its drivers. We have tested it on Windows 7 and 8 as well as Ubuntu 14.04 Trusty. MTP is enabled by default, but we do toggle it off and on automatically during certain operations such as if you choose to wipe a storage partition. You can enable or disable MTP under the mount menu in TWRP. For more about what MTP is here.
Note: Due to a weird bug with our MTP setup, you cannot copy a zip file to the root of storage with Windows. You can change the .zip to something else like .txt and then copy it to the root and rename the file back to .zip once it's copied to the device. You can also copy the zip into any subfolder.
Command line support is also now available. You can perform various OpenRecoveryScript commands via the adb shell. Depending on what you are doing you may wish to do a "twrp set tw_mtp_enabled 0" and then reboot to prevent the MTP auto toggle from killing your adb interface. You can use this option to create and restore backups, wipe, install zips, and more. Via adb shell, type twrp followed by a space then enter the OpenRecoveryScript command and hit enter. Find more OpenRecoveryScript commands here.
CHANGELOG for 2.7.1.0:
-Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. You will find this option under Wipe -> Advanced Wipe, then select only one partition and then press the Repair or Change File System button. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
-Various bugfixes to backup and restore
-Improvements to USB storage handling
-Added a class to search for files to make finding the correct brightness file automatic in most cases
-Various other bugfixes and tweaks
DOWNLOAD:
DOWNLOAD IMAGE
DOWNLOAD CWM / TWRP installable ZIP​
INSTALLATION:
NEEDS ROOT AND A LOKI VULNERABLE ABOOT (Stock 4.2.X roms)
Flash the recovery image with flashify.
Thanks:
TeamWin
AndroidUser00110001 for the base device three.
Click to expand...
Click to collapse
Source: https://github.com/victormlourenco/android_device_lge_v500-twrp.git
Kernel source : https://github.com/CyanogenMod/android_kernel_lge_v500/tree/8375d2b104da16ad362be597720c9440d10871bf
XDA:DevDB Information
TWRP for v500, Tool/Utility for the LG G Pad 8.3
Contributors
Rick Roll
Version Information
Status: Testing
Created 2014-12-10
Last Updated 2015-03-26

In the manual installation method, shouldn't we dd aboot partition and patch the recovery before flashing it? I don't know if newer versions of loki automatize all the process, but I was used to dd aboot partition, patch the recovery and then flash it. If the recovery image you are providing is already patched, then I don't think you need loki at all, you can just dd the file to the recovery partition.

Thank you so much for your continued support of this device.
I'm running your CM12 test build and waiting for the officicial builds to roll out.
Keep up the great work with this and Red Kernel...

i´m trying the manual method and getting this error:
Code:
[B][email protected]:/data/local/tmp #[/B] ./loki_flash recovery /data/local/tmp/openrecovery-twrp-2.8.2.0-v500.img
[+] loki_flash v2.1
[-] Input file is not a Loki image.
i cant figure out where i´m going wrong
could anyone help me please?
EDIT: drowngraded and used loki_tool instead loki_flash. 100% working

I'm currently on 4.4.2 base ... running aosp-L ... TWRP 2.8.0.0 ...
Updated to 2.8.2.0 using recovery-flash ... it works but the display is way too dimm ... need to get back to 2.8.0.0 for now.
By the way, don't use TWRP theme ... it works fine in 2.8.0.0 but on 2.8.2.0 will keep looping the TWRP logo screen.

I wonder why CWM recovery is not affected by the brightness issues between the different firmware bases.

I get 'Unsupported aboot image' what do I need to do to downgrade? Tried the flashify method also but it just halts on the splash screen with an error. Thank you very much for any help.
Sent from my XT1039 using Tapatalk

youngsta2010 said:
I get 'Unsupported aboot image' what do I need to do to downgrade? Tried the flashify method also but it just halts on the splash screen with an error. Thank you very much for any help.
Sent from my XT1039 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57137360&postcount=36

Please make it for the 4.4.2 base too if possible.

.. removed..

2.8.3.0 released!

Rick Roll said:
2.8.3.0 released!
Click to expand...
Click to collapse
Faster releases here as on the m8 lol. Nice job !

What does SuperSU do in the recovery?
Rick Roll said:
-Update SuperSU in TWRP to 2.40 and update install process
Click to expand...
Click to collapse
I'm just curious. What do the SuperSU files in the initrd do? Does this recovery forcibly install SuperSU even if I don't want a rooted system or if another root permissions method is installed?

usenametaken said:
I'm just curious. What do the SuperSU files in the initrd do? Does this recovery forcibly install SuperSU even if I don't want a rooted system or if another root permissions method is installed?
Click to expand...
Click to collapse
If you don't have a su binary (not rooted), twrp will ask you to install SuperSU.

I have buy the LG PAD and have update to the latest Firmware and whene i flash now with flashify this recovery i can not boot in the recovery. I see only 2 white line text with error message.

Schrotty35 said:
I have buy the LG PAD and have update to the latest Firmware and whene i flash now with flashify this recovery i can not boot in the recovery. I see only 2 white line text with error message.
Click to expand...
Click to collapse
You need to downgrade to 4.2.x.
http://forum.xda-developers.com/showpost.php?p=51466025&postcount=1

I have downgrade to 20b but also not work. I see also the 2 text lines with error. I have flash with flashify.

Schrotty35 said:
I have downgrade to 20b but also not work. I see also the 2 text lines with error. I have flash with flashify.
Click to expand...
Click to collapse
I suggest you try manually installing the recovery if it's the first time.

Deltadroid said:
I suggest you try manually installing the recovery if it's the first time.
Click to expand...
Click to collapse
I have manuel installed with flashify or what you mean????

I mean manually installing from a command line using a shell.

Related

[TOOL/UTILITY][TWRP][3.0][RECOVERY] TWRP 3.0.2-0 TeamWin Recovery Project 4/5

[RECOVERY] [4/5/16] TWRP 3.0.2-0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.0.2-0 for the Galaxy Note (T-Mobile)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
quincytmo Device Config: https://github.com/TeamWin/android_device_samsung_quincytmo
Kernel: https://github.com/bigbiff/i717-GB-Kernel
DOWNLOAD:
All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.
http://twrp.me
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers
Changelog
3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.
3.0.1-0
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices (xuefer)
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option - more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won't prompt to install SuperSU and TWRP won't try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don't take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
2.8.6.0
- Allow mulitple overlays for popup boxes (Dees_Troy)
- Add pattern style password entry for decrypt (Tassadar)
- Keyboard improvements (_that)
- Update AOSP base to 5.1 (Dees_Troy)
- Reduce theme count to 5 and rely on scaling (Dees_Troy)
- Various scaling improvements (Dees_Troy)
- Improved handling of resources in the GUI (_that)
- Make scroll bar size proportional to list size (_that)
- Allow scoll lists to render without a header (_that)
- Make console scroll per pixel with kinetic scrolling (_that)
- Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
- Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
2.8.5.0
- Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
- Improve thread handling and move input handling into the main rendering thread to improve stability
- Make MTP work even if unplugged and plugged back in
- Unify scrollable list code and make kinetic scrolling feel more natural
- Fix handling of mapped zip files for OTA updates (CM12 updater)
- USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
- Add Cancel Backup capability
- Other small fixes and improvements
2.8.4.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
- Fix some MTP related crashes and bugs
- Eliminate TWRP toggling USB IDs during boot if MTP is enabled
- Fix various adb sideload issues
- Improve threading of actions
- Eliminate separate thread for screen timeout
- Update libblkid to 2.25.0
- Use power button as back button on watch themes for easier navigation
- Add mutex locking to data manager
- Improve custom theme handling on encrypted devices
- Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
2.8.4.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
- Fix some MTP related crashes and bugs
- Eliminate TWRP toggling USB IDs during boot if MTP is enabled
- Fix various adb sideload issues
- Improve threading of actions
- Eliminate separate thread for screen timeout
- Update libblkid to 2.25.0
- Use power button as back button on watch themes for easier navigation
- Add mutex locking to data manager
- Improve custom theme handling on encrypted devices
- Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
2.8.3.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- MTP will now tell the host PC that storage is removed instead of disabling MTP completely
- MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
- Update and improve fix permissions and make fixing contexts optional
- Update SuperSU in TWRP to 2.40 and update install process
- Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
- Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
- Fix kernel panic during MTP start on some devices
- Support unicode fonts on devices with True Type Font support
- Fix slider value not showing sometimes (vibration settings page)
- Toggle MTP off during adb sideload to set correct USB IDs
- Reduce library requirements for 5.0 L decrypt
- Other minor fixes and improvements
2.8.0.0
- Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
- Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
- Add support for color in the console and give error, warning, and highlight lines different colors
- Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
- Improve handling of /misc thanks to mdmower
- Improve setting of time on Qualcomm devices thanks to [NUT]
- Allow using images on slidervalue GUI objects thanks to Tassadar
- Allow using variables and addition and subtraction in variables for easier theming
- Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
- Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
- Other minor fixes and improvements
2.7.1.0
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
2.7.0.0:
-Faster graphics rendering by disabling alpha blending on fully opaque objects thanks to Tassadar
-Allow sideloading from /tmp on encrypted devices
-Check for a crypto footer before asking for a password to prevent user confusion
-Additional checks for validity to auto generated backup names
-Text wrap in the console output
-Proper caps lock support in the keyboard
-Mouse support via USB OTG for devices with a broken digitizer
-Improve scanning of storage locations for OpenRecoveryScript
-Haptic feedback for buttons, keyboard, and vibration at the end of longer running actions thanks to Samer Diab
-Fixed ext4 wiping when no selinux contexts are defined for that partition (e.g. sd-ext)
-Update SuperSU to 1.93 and improve installation process
-Added selinux contexts restoration to fix permissions
-Load RTC offset on Qualcomm devices to fix the date/time in recovery
-USB Mass Storage fixes Add SELinux support checking
-Add Disk Usage class to better handle excluded folders (e.g. Google Music cache)
-Add 4.4 decrypt support
-Add some toolbox utilities to TWRP (namely to support SELinux functions not supported in busybox)
-Various SELinux fixes and bug fixes
Note: 2.7 marks the first time that we are dropping support for older devices. We are doing this because of the SELinux support needed to install 4.4 Kit Kat ROMs. The non-TWRP parts of the recovery image have to be built in at least a 4.1 tree and the kernel that is included in the recovery image has to support writing SELinux contexts. We don't own most of the devices that we support so we depend on outside testers and developers to help us update devices. In many cases we can't find someone readily. Come to #twrp on Freenode if you want to help bring your device up to date. You can tell right away if your device will support 4.4 ROMs in 2.7. Boot TWRP and press the console button (the square-ish button either in the bottom middle or upper right) to view the console output. If it doesn't say "Full SELinux support" in the console, then your device still needs some work. Help us help you.
2.6.3.0
Proper backup and restore of SELinux contexts (thanks to Tassadar)
Pull in some ROM information for backup name generation
Merge all recent patches from AOSP bringing TWRP up to date with Android 4.3
Add 1200x1920 theme (thanks to Tassadar)
A few other fixes and tweaks
2.6.1.0
Initial SELinux support (only a few devices, need testers so come by IRC if your device doesn't have it and needs it)
Initial support for f2fs file system formatting (Moto X)
Update SuperSU install for 4.3 ROMs
Fixed a permissions bug on files created during backup
Fixed a bug that caused TWRP to not wait for compressed backups to finish causing 0 byte files and md5sums to not match
Fixed decryption of encrypted data so that both TouchWiz and AOSP decryption are possible
Ignore lost+found folder during backup and size calculations
Various other minor bug fixes and tweaks
2.6.0.1
Fix Data being listed twice in advanced wipe
2.6.0.0
Special Note: If you are running a custom theme, you will likely need to remove that theme before updating to 2.6.0.0 as your custom theme will likely not have some of the new changes visible (e.g. you won't be able to encrypt a backup)!
Can encrypt a backup to prevent theft of private data from your backup files
Updated graphics / icon courtesy of shift
Updated exFAT to latest commits
Fixed a problem with Samsung TouchWiz decryption
Update SuperSU binary
Fixed saving of backup partitions list
Fixed saving of last used zip install folder
Fixed backup of datadata on devices that use a separate partition for datadata
Fixed some issues with the advanced wipe list (android_secure, can now wipe internal storage on data/media deivces and wipe data on the advanced list no longer formats the entire data partition)
Fixed some problems with partitioning a SD card
Various other bug fixes and tweaks
Notes about encrypted backups:
Why encrypt your backups? -- Most people store their backups on the device. Any app that has permission to access storage could potentially read your backup files and try to harvest your data. Encrypted backups also provide an added layer of security if you move your backups to other storage devices or to the cloud. The encryption that we're using is probably not strong enough for enterprise level security, but should be strong enough to make it significantly difficult to get to your data.
Encryption is using OpenAES which uses AES 128-bit cbc encryption. If you happen to use a longer password (over 16 characters) then the encryption strength improves to 192 or 256 bits. Do not forget your password. If you forget your password you will be unable to restore your backup. We don't encrypt the entire backup. Encryption is very CPU intensive and can be fairly slow even when we spread the workload over multiple cores even on the latest high-end devices. To ensure that encrypted backups don't take forever, we don't encrypt any other partitions besides /data and in /data we don't encrypt /data/app (or other app related directories where apks are stored) and we don't encrypt dalvik cache.
2.5.0.0
Added scrollable partition lists for mount, backup, restore, wipe, and storage selection
Add new SliderValue GUI element for selecting brightness and screen timeout (thanks to Tassadar)
Re-work AOSP and TWRP code to improve license compatibility between GPL and Apache
Fixed a problem with directory permissions on split archive backups
Fixed a problem with md5 verification of backups
Added a search function to libtar (thanks to kokotas)
Improve handling of XML errors (fix permissions)
Fixed handling of subpartitions
Improvements to recovery.fstab flags
Fixed a problem with decryption not being able to locate the decryption key in some situations
2.4.4.0
Added another libtar hardlink workaround to fix restore of some backups (usually related to Ubuntu Touch)
More fixes for the file selector
Switched from using busybox md5sum to a direct C function call
Fixed capturing the exit status of tar based backups/restore - TWRP will display that there was an error if there was one again
Update exFAT to latest commits
Added a build flag to disable using the ioctl for screen blanking
2.4.3.0
Fixed 2 bugs related to restore, one dealing with mknod failures (by bigbiff) and one dealing with restoring hardlinks (by Dees_Troy)
NOTE: If your backups weren't restoring correctly in earlier 2.4.x versions they should restore correctly now. Hopefully you didn't delete those backups. If you're still having problems, run the restore, go to advanced and copy log, then give us the log. Complaints without logs will be rightfully ignored.
Added a scroll bar to file selectors and listboxes courtesy of Tassadar
Added libblkid for more accurate detection of file systems and can now detect exFAT properly thanks to bigbiff
Added a screen dim effect 2 seconds before screen off on some devices
Finally fixed file selector crash (one of the joys of working with multi-threaded software)
Fixed loading of screen timeout setting during startup
Improvements and bugfixes to screen timeout code
Fix Military Time setting persisting
2.4.2.0
Add screen timeout - screen will turn off automatically after 60 seconds, saves battery and prevents screen burn-in especially on AMOLED devices
Add a brightness setting (requires device specific setup and only some devices have been added)
Add a root checker and offer to install SuperSU if the device isn't already rooted
Add a write buffer to libtar backups, significant improvements to speeds when backing up to exFAT target, minor improvements for other file systems
Check and offer to fix root permissions if broken
Add an option for a 24 hour clock display instead of AM/PM (aka military time)
Move stock recovery reflash check to occur during the reboot cycle
Add support for some MTK6xxx devices
Change libtar to vfork to help prevent memory problems
Add a "clicked" effect to most buttons, file selector, and listbox
Improve timezone listbox to be more like file selector (per pixel kinetic scrolling, etc)
Remove some no longer used settings (Forced MD5 sum on zips, size checking on image backups)
Other minor bugfixes and improvements
2.3.3.0
Added better handling of wiping on /data/media devices with Android 4.2 to help prevent multiple upgrades of the file system for multiple users
NOTE: It is not recommended to jump back and forth between 4.1 and 4.2 ROMs. If you do, this may trigger additional upgrades and you will have to manually move your files back to the "single user" layout when going back to 4.1.
Fixed renaming of backups when a space is present
Added decrypt button to mount page if you cancel decryption during boot
Added ignore blkid flag support
Fixed handling of MTD partitions during mount
Fixed some keyboard mapping issues on 800x1280 layout
2.3.2.3
Added ability to backup modem
Fixes / enhancements to handle the multiple user setup introduced by Android 4.2 (see http://teamw.in/androidmultiuser)
Fixed a bug with deleting a backup with a space in the name
Added highlights on keyboard key presses
Updates to Fix Permissions
2.3.1.1
Fixed keyboard segfault
Handle single LUN file for USB Storage
Handle mounting of slow sdcards
Update USB Mount Code to be more Efficient
Many, many updates. See https://github.com/TeamWin/Team-Win-Recovery-Project/commits/jb-wip/ for detailed commits.
second
Am I third????:thumbup:
Sent from my SGH-T879 using xda premium
I respect your work.Thanks
Yessssssssssss more development!!! Now if we could just get another ROM =)
Sent from my SAMSUNG-SGH-I717 using xda premium
It's actually good. I fooled with it for a whilw
Sent from my SGH-T879 using xda app-developers app
Its more then good its greattttttttt.
Sent from my SAMSUNG-SGH-I717 using xda premium
I've been using the one for the i717 note and its been fine. Is there any reason I should update to this version?
Sent from my SGH-T879 rom using i717m device using Tapatalk 2
Can't get it working for me. It never seems to mount my external SD card ... any ideas?
Sent from my SGH-T879 using xda premium
You should be able to just select the external sd option right on the bottom of the screen . Then again I install ths one for the i717 so that might be a difference. Did you try the one for the at&t note ?
tomin.fhl said:
Can't get it working for me. It never seems to mount my external SD card ... any ideas?
Sent from my SGH-T879 using xda premium
Click to expand...
Click to collapse
Sent from my SGH-T879 rom using i717m device using Tapatalk 2
No, I installed the T-mobile version. Let me try the i717 version.
Sent from my SGH-T879 using xda premium
tomin.fhl said:
Can't get it working for me. It never seems to mount my external SD card ... any ideas?
Sent from my SGH-T879 using xda premium
Click to expand...
Click to collapse
Alicklee said:
You should be able to just select the external sd option right on the bottom of the screen . Then again I install ths one for the i717 so that might be a difference. Did you try the one for the at&t note ?
Sent from my SGH-T879 rom using i717m device using Tapatalk 2
Click to expand...
Click to collapse
tomin.fhl said:
No, I installed the T-mobile version. Let me try the i717 version.
Sent from my SGH-T879 using xda premium
Click to expand...
Click to collapse
Can you send me the log from /tmp/recovery.log so I can look at it?
How do I flash it though? I installed it via GooManager, but even though it says installed, when I reboot, i'm in CWM Recovery
EDIT: Got it. Went to site and flashed through recovery!
Hi. I just received a report of this port not rebooting to android without Odin. Can someone please verify? Thanks!
I've been trying to use twrp for days now and its just not working. I installed goo manager and down loaded T-Mobile galaxy note recovery, but every time I reboot into recovery all I see is cwm recovery menu with just option to install zip from external SD card. Please help
Sent from my SGH-T879 using xda premium
lrodri30 said:
I've been trying to use twrp for days now and its just not working. I installed goo manager and down loaded T-Mobile galaxy note recovery, but every time I reboot into recovery all I see is cwm recovery menu with just option to install zip from external SD card. Please help
Sent from my SGH-T879 using xda premium
Click to expand...
Click to collapse
Go to rotohammers cm10 thread download the twrp recovery zip in the OP. Flash it in CWM recovery then choose reboot recovery in the advance menu in CWM recovery....
sent from my T-mo Note
Thanks it worked!
Sent from my SAMSUNG-SGH-I717 using xda premium
problem loading roms
If you need help please, please, please, please post recovery.log.
1. adb pull /tmp/recovery.log or Advanced->Copy Log to SDCard
2. Upload /tmp/recovery.log or /sdcard/recovery.log to**CENSORED**
I have TWRP on my T-Mo Note T879, which I installed thru GooManager....and whenever I try to flash a rom I get a fail...I posted the last recovery.log to the link above.....and I have also tried 4 different roms....some I got through goomanager, other were ones I had downloaded....but the result is the same....
jcaplinger said:
If you need help please, please, please, please post recovery.log.
1. adb pull /tmp/recovery.log or Advanced->Copy Log to SDCard
2. Upload /tmp/recovery.log or /sdcard/recovery.log to**CENSORED**
I have TWRP on my T-Mo Note T879, which I installed thru GooManager....and whenever I try to flash a rom I get a fail...I posted the last recovery.log to the link above.....and I have also tried 4 different roms....some I got through goomanager, other were ones I had downloaded....but the result is the same....
Click to expand...
Click to collapse
We don't get automatic emails when you paste it. We need the URL to see what you pasted.

[TOOL/UTILITY][TWRP][3.2][RECOVERY] TWRP 3.2.1-0 TeamWin Recovery Project

[RECOVERY] [4/5/16] TWRP 3.2.1-0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.2.1-0 for the Samsung Galaxy Note Pro 12.2 (Exynos and Qualcom)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
v1awifi Device Config: TBD
Kernel: TBD
DOWNLOAD:
All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.
http://twrp.me
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers
Changelog
Please see http://twrp.me for release notes.
3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.
3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.
3.0.1-0
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
3.0.0.1
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.
What’s new in 3.0.0-0:
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Head over to the devices page to find install instructions and download links.
2.8.7.1
v1awifi only
-Fix brightness slider
2.8.7.0
- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices (xuefer)
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option - more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won't prompt to install SuperSU and TWRP won't try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don't take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
2.8.6.0
- Allow mulitple overlays for popup boxes (Dees_Troy)
- Add pattern style password entry for decrypt (Tassadar)
- Keyboard improvements (_that)
- Update AOSP base to 5.1 (Dees_Troy)
- Reduce theme count to 5 and rely on scaling (Dees_Troy)
- Various scaling improvements (Dees_Troy)
- Improved handling of resources in the GUI (_that)
- Make scroll bar size proportional to list size (_that)
- Allow scoll lists to render without a header (_that)
- Make console scroll per pixel with kinetic scrolling (_that)
- Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
- Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
2.8.5.0
- Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
- Improve thread handling and move input handling into the main rendering thread to improve stability
- Make MTP work even if unplugged and plugged back in
- Unify scrollable list code and make kinetic scrolling feel more natural
- Fix handling of mapped zip files for OTA updates (CM12 updater)
- USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
- Add Cancel Backup capability
- Other small fixes and improvements
2.8.4.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
- Fix some MTP related crashes and bugs
- Eliminate TWRP toggling USB IDs during boot if MTP is enabled
- Fix various adb sideload issues
- Improve threading of actions
- Eliminate separate thread for screen timeout
- Update libblkid to 2.25.0
- Use power button as back button on watch themes for easier navigation
- Add mutex locking to data manager
- Improve custom theme handling on encrypted devices
- Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
2.8.3.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- MTP will now tell the host PC that storage is removed instead of disabling MTP completely
- MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
- Update and improve fix permissions and make fixing contexts optional
- Update SuperSU in TWRP to 2.40 and update install process
- Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
- Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
- Fix kernel panic during MTP start on some devices
- Support unicode fonts on devices with True Type Font support
- Fix slider value not showing sometimes (vibration settings page)
- Toggle MTP off during adb sideload to set correct USB IDs
- Reduce library requirements for 5.0 L decrypt
- Other minor fixes and improvements
2.8.1.2
v1a3gxx
-add MODEM to backup
2.8.1.1
v1awifi/v1a3gxx
- add efs to backup
viennaltexx
-add MODEM to backup
2.8.1.1
- add efs to backup
2.8.1.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
- Temperature support - thanks to bigbiff
- Various other bugfixes and tweaks
2.8.0.0
- Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
- Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
- Add support for color in the console and give error, warning, and highlight lines different colors
- Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
- Improve handling of /misc thanks to mdmower
- Improve setting of time on Qualcomm devices thanks to [NUT]
- Allow using images on slidervalue GUI objects thanks to Tassadar
- Allow using variables and addition and subtraction in variables for easier theming
- Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
- Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
- Other minor fixes and improvements
2.7.1.1 viennaltexx only
- fix viennaltexx booting
2.7.1.0
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
2.7.0.2
Fix backup/restore to external SD Card
2.7.0.1
Fix cache formatting by allowing secure discard. This means it will take 5 minutes to wipe cache.
Reserved2
You are awesome. Thank you for the recovery....!
Thank you...
Sent from my SM-P900 using XDA Premium 4 mobile app
Awesome! Thanks so much. Will be sending bounty donation along next pay check.
Worked perfectly here on SM-P900. Installed via Odin 3.09. Tried a backup to ext-sd, and it worked as well. Thanks bigbiff (et al. )
Sent from my SM-P900 using Tapatalk
This is great. Is TWRP being developed also for the SM-P905 ?
Yup, Works perfectly. I'm proud to say I was the first user with a P900 to have a working TWRP thanks to bigbiff.
Mike02z said:
Yup, Works perfectly. I'm proud to say I was the first user with a P900 to have a working TWRP thanks to bigbiff.
Click to expand...
Click to collapse
Yours shows 2.7.0.2, but the downloadable version is 2.7.0.0. Difference?
Also I see twrp has a problem mounting cache partition. At least on mine.
Sent from my VS980 4G using XDA Premium HD app
icem237 said:
Yours shows 2.7.0.2, but the downloadable version is 2.7.0.0. Difference?
Also I see twrp has a problem mounting cache partition. At least on mine.
Sent from my VS980 4G using XDA Premium HD app
Click to expand...
Click to collapse
Yes mine too
Sent from my Nexus 7 using Tapatalk
In case anyone doesnt know.... I tried formating cache and dalvik . dalvik went fine but since twrp cant mount cache partition it errors . Now i experience a boot loop on the samsung logo. Can get back in to twrp no problem. Just need the stock image for SM-P9000ZWFXAR. Sam Mobile or samsung it self doesnt have it available.
icem237 said:
In case anyone doesnt know.... I tried formating cache and dalvik . dalvik went fine but since twrp cant mount cache partition it errors . Now i experience a boot loop on the samsung logo. Can get back in to twrp no problem. Just need the stock image for SM-P9000ZWFXAR. Sam Mobile or samsung it self doesnt have it available.
Click to expand...
Click to collapse
the exact same thing happened to me, I downloaded the firmware from Peru on sammobile (I'm in us) and it worked.
Sent from my SPH-L720 using Tapatalk
hendav said:
the exact same thing happened to me, I downloaded the firmware from Peru on sammobile (I'm in us) and it worked.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info.... Why peru? just curious?
Sweet to see this come to the Note Pro. Once the cache wipe issue gets resolved, this will be an insta install on mine, as well as yet another donation to TWRP.
2.7.0.2 in Mike's screenshot was just me being lazy not resetting the version number when testing.
I already have -DNO_SECURE_DISCARD in BoardConfig so cache should be formatting...
Can someone with this issue post /tmp/recovery.log?
bemanet said:
This is great. Is TWRP being developed also for the SM-P905 ?
Click to expand...
Click to collapse
Adding to my port list. Can you provide stock recovery?
icem237 said:
Thanks for the info.... Why peru? just curious?
Click to expand...
Click to collapse
I was told by a samsung tech that it doesn't matter where you download from, as long as you get a good download speed and it is the most recent firmware. Everything seems to be fine so far.
Sent from my SPH-L720 using Tapatalk
Very odd. During my testing I ran a full backup. I rebooted into the OS then went back into recovery and then restored the backup. It restored fine. It wiped the cache partition and restored it.
When I just tested wiping cache from the advanced wipe menu, It says it is wiping cache but never completes. When I reboot it goes right into TWRP. When I tell it to reboot system it gets passed the initial Samsung splash screen and the Samsung logo and music starts but the music gets cut off and it just sits at that logo.Mine appeared frozen but was not boot looping.
I went back into TWRP and restored my backup and it again wiped cache and formatted it fine. After it completed I booted normally. Not sure why it is wiping and restoring fine but is not wiping from the advanced wipe function.
BTW, there is no /tmp directory in my SM900 or I would have posted the recovery.log. Is is somewhere else?
Mike02z said:
Very odd. During my testing I ran a full backup. I rebooted into the OS then went back into recovery and then restored the backup. It restored fine. It wiped the cache partition and restored it.
When I just tested wiping cache from the advanced wipe menu, It says it is wiping cache but never completes. When I reboot it goes right into TWRP. When I tell it to reboot system it gets passed the initial Samsung splash screen and the Samsung logo and music starts but the music gets cut off and it just sits at that logo.Mine appeared frozen but was not boot looping.
I went back into TWRP and restored my backup and it again wiped cache and formatted it fine. After it completed I booted normally. Not sure why it is wiping and restoring fine but is not wiping from the advanced wipe function.
BTW, there is no /tmp directory in my SM900 or I would have posted the recovery.log. Is is somewhere else?
Click to expand...
Click to collapse
/tmp should be created in twrp ramdisk on boot. It will go away on reboot. I am not sure what is going on unless there is something in cache that is needed on boot. Can you see if logcat is working on the Samsung screen?
bigbiff said:
/tmp should be created in twrp ramdisk on boot. It will go away on reboot. I am not sure what is going on unless there is something in cache that is needed on boot. Can you see if logcat is working on the Samsung screen?
Click to expand...
Click to collapse
OK, let me try again and see if I can get it.

[RECOVERY][Condor] TWRP 2.8.7 touch recovery [2015-05-05]

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.8.7:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG for 2.8.5.0:
-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements
CHANGELOG for 2.8.4.0:
-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
CHANGELOG for 2.8.3.0:
-MTP will now tell the host PC that storage is removed instead of disabling MTP completely
-MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
-Update and improve fix permissions and make fixing contexts optional
-Update SuperSU in TWRP to 2.40 and update install process
-Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
-Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
-Fix kernel panic during MTP start on some devices
-Support unicode fonts on devices with True Type Font support
-Fix slider value not showing sometimes (vibration settings page)
-Toggle MTP off during adb sideload to set correct USB IDs
-Reduce library requirements for 5.0 L decrypt
-Other minor fixes and improvements
Note: Starting with TWRP 2.8.2.0 and higher, adb sideload uses a new sideload method originally implemented in AOSP recovery. You will need the latest adb binaries to use sideload in these newer versions of TWRP. The version required is 1.0.32. You can find the version by running "adb version" on your computer. The new sideload feature no longer stores the zip on your device. Instead, a fuse file system is created in RAM and the zip is streamed from your computer. This puts less wear and tear on storage and ensures that large zips will not fill up all of your RAM. The sideload may spit an error on your PC side, but the zip should install just fine on your device.
DOWNLOAD:
Download the latest TWRP for CONDOR
1) Install TWRP Manager from the Play Store
2) Open TWRP Manager and provide root permissions
3) Hit Advanced->Install Recovery
4) Verify the correct device name on your screen then press Install Recovery if the correct device is showing
OR:
You can find more information and download links on our NEW website! NOTE that the 2.8.6.0 version is ONLY available on our new site and is not available on our other, older mirrors!
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
TWRP for Condor, Tool/Utility for the Moto E
Contributors
ashwin007
Version Information
Status: Testing
Created 2015-05-05
Last Updated 2015-07-30
Wow Thank you very much, long time ago expecting this version, you are the best
Bugs? Can be used as daily? @magdeoz r u tested? Wiping /flashing works? Partition detected?
Adarsh1998 said:
Bugs? Can be used as daily? @magdeoz r u tested? Wiping /flashing works? Partition detected?
Click to expand...
Click to collapse
if everything works correctly
Everything works good.Good for daily use xD
ashwin007 said:
Everything works good.Good for daily use xD
Click to expand...
Click to collapse
If possible can you also build latest Multirom twrp. not asking for ETA ,just a request
Great job, was waiting for this :good:
Well done 2.8.5.0 was too slow when wiping but this has wiped in seconds, great recovery working all well..
How do I update?? I installed TWRP manager but I dont have any advance option to install a new recovery, thx.
Edit:
Ended up using a different app to flash it, flashify. Still would be nice to know how to install via the official TWRP app
thanks.. great update for great recovery
looking forward to flash it
error..
While wiping internal memory it says "successful" but shows sime error . attaching screenshot.
sandeep_7 said:
While wiping internal memory it says "successful" but shows sime error . attaching screenshot.
Click to expand...
Click to collapse
+1
same here
recovery log attached
sandeep_7 said:
While wiping internal memory it says "successful" but shows sime error . attaching screenshot.
Click to expand...
Click to collapse
mepsilon2 said:
+1
same here
recovery log attached
Click to expand...
Click to collapse
Has it really wiped the partition?
Sent from my Moto G using XDA Free mobile app
ashwin007 said:
Has it really wiped the partition?
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
I also face that bug, it wipes the partition.
yes
ashwin007 said:
Has it really wiped the partition?
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Yes, it successfuly wiped the internal memory
ashwin007 said:
Has it really wiped the partition?
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
yes, it has
nice work buddy,anyways is it still in testing or stabilized?
DOWNLOAD:
Download the latest TWRP for CONDOR
1) Install TWRP Manager from the Play Store
2) Open TWRP Manager and provide root permissions
3) Hit Advanced->Install Recovery
4) Verify the correct device name on your screen then press Install Recovery if the correct device is showing
TWRP Manager from Play Store install old version 2.7.1.0
OR:
You can find more information and download links on our NEW website! NOTE that the 2.8.6.0 version is ONLY available on our new site and is not available on our other, older mirrors!
From this link Old version 2.7.1.0
Where i can download FLASHABLE Version 2.8.6.0 of TWRP Recovery ( ZIP ), not .IMG ? Thanks
ZhekaJ said:
DOWNLOAD:
Download the latest TWRP for CONDOR
1) Install TWRP Manager from the Play Store
2) Open TWRP Manager and provide root permissions
3) Hit Advanced->Install Recovery
4) Verify the correct device name on your screen then press Install Recovery if the correct device is showing
TWRP Manager from Play Store install old version 2.7.1.0
OR:
You can find more information and download links on our NEW website! NOTE that the 2.8.6.0 version is ONLY available on our new site and is not available on our other, older mirrors!
From this link Old version 2.7.1.0
Where i can download FLASHABLE Version 2.8.6.0 of TWRP Recovery ( ZIP ), not .IMG ? Thanks
Click to expand...
Click to collapse
I don't think recovery can Flasheble on zip. You can install this . Img with the flashify app

[RECOVERY][h811] TWRP 2.8.7.2 touch recovery

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG for 2.8.5.0:
-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements
CHANGELOG for 2.8.4.0:
-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
CHANGELOG for 2.8.3.0:
-MTP will now tell the host PC that storage is removed instead of disabling MTP completely
-MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
-Update and improve fix permissions and make fixing contexts optional
-Update SuperSU in TWRP to 2.40 and update install process
-Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
-Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
-Fix kernel panic during MTP start on some devices
-Support unicode fonts on devices with True Type Font support
-Fix slider value not showing sometimes (vibration settings page)
-Toggle MTP off during adb sideload to set correct USB IDs
-Reduce library requirements for 5.0 L decrypt
-Other minor fixes and improvements
Note: Starting with TWRP 2.8.2.0 and higher, adb sideload uses a new sideload method originally implemented in AOSP recovery. You will need the latest adb binaries to use sideload in these newer versions of TWRP. The version required is 1.0.32. You can find the version by running "adb version" on your computer. The new sideload feature no longer stores the zip on your device. Instead, a fuse file system is created in RAM and the zip is streamed from your computer. This puts less wear and tear on storage and ensures that large zips will not fill up all of your RAM. The sideload may spit an error on your PC side, but the zip should install just fine on your device.
DOWNLOAD/DOWNLOAD FLASHABLE ZIP:
https://www.androidfilehost.com/?w=files&flid=35960
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
This is for the T-Mobile LG G4 only. Thanks to @smw6180 for testing
Prerequisites:
* Root
* Unlocked bootloader (In developer options, enable oem unlock)
Installation:
* Flash with flashify (probably the easiest method)
* Flash with dd via adb shell or terminal emulator (assuming the image is in the root of your internal sdcard)
Get root permission
Code:
su
Flash the image to recovery partition
Code:
dd if=/sdcard/twrp-2.8.7.2-h811.img of=/dev/block/bootdevice/by-name/recovery
Pic of my TMO 811H running TWRP. Testing backup and recovery as we speak. Great work on this UD!
I'm confused, does simply enabling oem unlock in dev options unlock the bootloader? There's no command that needs to be done? (sorry, coming from a Nexus and new to LG)
G4'ed it!
YankInDaSouth said:
I'm confused, does simply enabling oem unlock in dev options unlock the bootloader? There's no command that needs to be done? (sorry, coming from a Nexus and new to LG)
G4'ed it!
Click to expand...
Click to collapse
That was all I needed to do, yes.
YankInDaSouth said:
I'm confused, does simply enabling oem unlock in dev options unlock the bootloader? There's no command that needs to be done? (sorry, coming from a Nexus and new to LG)
G4'ed it!
Click to expand...
Click to collapse
Yes, this only works on T-mobile variant though.
smw6180 said:
That was all I needed to do, yes.
Click to expand...
Click to collapse
Thanks for the confirmation!
Unjustified Dev said:
Yes, this only works on T-mobile variant though.
Click to expand...
Click to collapse
Was going to hold of on root to see if an easier/more "refined" method became available (ah, who I am kidding, I am just being lazy [emoji13]) but having TWRP available changes everything!
G4'ed it!
Ok, wiped system after doing a TWRP backup:
Code:
/dev/block/mmcblk0p53 4249392 8684 4224324 0% /system
Restored with TWRP and it booted.
Code:
/dev/block/mmcblk0p53 4249392 3296524 936484 78% /system
---------- Post added at 09:26 AM ---------- Previous post was at 09:09 AM ----------
TWRP backup/restore /data test:
Before Wipe:
Code:
/dev/block/mmcblk0p55 23837100 15775120 8004636 66% /data
After Wipe (internal storage not touched):
Code:
/dev/block/mmcblk0p55 23837100 9819936 13959820 41% /data
C:\Users\Steve\Desktop>adb shell ls -l /data
drwxrwx--- 5 media_rw media_rw 4096 Jan 1 00:01 media
After TWRP restore:
Code:
/dev/block/mmcblk0p55 23837100 15780820 7998936 66% /sdcard
System rebooted fine, all apps functional. Minor difference in total used storage before and after (Before: 15775120 After: 15780820) which could be cache files or something else.
I didn't write the code.
so this works also on H815 branded: root with codefires tutorial then in dev settings oem unlock and use h815 recovery?
2nd Sky said:
so this works also on H815 branded: root with codefires tutorial then in dev settings oem unlock and use h815 recovery?
Click to expand...
Click to collapse
Only tested on TMO 811H. No idea if the partitions are the same. I wouldn't mess with it.
@Unjustified Dev has requested this thread be moved to the TMO forum already.
2nd Sky said:
so this works also on H815 branded: root with codefires tutorial then in dev settings oem unlock and use h815 recovery?
Click to expand...
Click to collapse
I understand what your saying , but if you have the option to use LG unlock when you go to bootloader it won't work. T-Mobile doesn't have this option at all and when enabling OEM unlock , it actually unlocks the bootloader.
Sent from my LGMS395 using Tapatalk
Up and running on my T-Mo G4!! Thanks so much OP! My device now feels complete!
Edit: A little something to show my appreciation -Confirmation number: 9RN468126J644653F (wish I could have done more for ya!)
[QUOTE'=Unjustified Dev;62032249]I understand what your saying , but if you have the option to use LG unlock when you go to bootloader it won't work. T-Mobile doesn't have this option at all and when enabling OEM unlock , it actually unlocks the bootloader.
Sent from my LGMS395 using Tapatalk[/QUOTE]
Just a little clarification please. If we go to our bootloader screen and there is no option to Use LG unlock, then it might be possible to use oem unlock to unlock Bootloader? will check my bootloader screen just to make sure what's listed.
update-- mine suggest using the unlock.bin to unlock bootloader so I guess oem unlock wont work without the unlock bin file.
reboot into twrp
YankInDaSouth said:
Up and running on my T-Mo G4!! Thanks so much OP! My device now feels complete!
Edit: A little something to show my appreciation -Confirmation number: 9RN468126J644653F (wish I could have done more for ya!)
Click to expand...
Click to collapse
I have a question do you know how to reboot to twrp once it is on the phone thanks.
cabb84 said:
I have a question do you know how to reboot to twrp once it is on the phone thanks.
Click to expand...
Click to collapse
I'm using the TWRP app... Boots into recovery without issue.
G4'ed it!
YankInDaSouth said:
I'm using the TWRP app... Boots into recovery without issue.
G4'ed it!
Click to expand...
Click to collapse
Did you use flashify to install twrp on the phone or did you dd it thanks im just wondering the best method to use.
cabb84 said:
Did you use flashify to install twrp on the phone or did you dd it thanks im just wondering the best method to use.
Click to expand...
Click to collapse
Flashify.... SUPER easy!
G4'ed it!
cabb84 said:
I have a question do you know how to reboot to twrp once it is on the phone thanks.
Click to expand...
Click to collapse
To do it at boot..
1. Turn off your phone
2. Press and hold Power and Volume down buttons at the same time.
3. When the LG logo appears, release the power button.
4. Wait one second and press the power button again until the Hard Reset menu shows up.
5. Press Power button once to select the hard reset option. It will boot to TWRP as the stock recovery is not installed.
Omg this will be one of my happiest day ever for any phone upgrades i have done
Thanks man. Just flashed and all is good in the world again.

[RECOVERY][LOLLIPOP]TWRP2.8.7.X for the Huawei P8 Lite (ALE-L04)

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG for 2.8.5.0:
-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements
CHANGELOG for 2.8.4.0:
-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
DOWNLOAD:
You can find more information and download links on BasketBuild!
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
[RECOVERY][LOLLIPOP]TWRP2.8.7.X for the Huawei P8 Lite (ALE-L04), Tool/Utility for the Huawei P8lite/P8 Lite
Contributors
thenameisnigel, h8rift
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Current Stable Version: 2.8.7.0
Stable Release Date: 2015-09-22
Created 2015-09-23
Last Updated 2018-03-02
great thanks!
do you know where can i download lollipop for ale-04? i cant find anything
when TWRP2.8.7.X for the Huawei P8 Lite (ALE-L21)?
can I use this for ale-21?
maximil_98 said:
when TWRP2.8.7.X for the Huawei P8 Lite (ALE-L21)?
can I use this for ale-21?
Click to expand...
Click to collapse
http://forum.xda-developers.com/p8lite/development/testing-twrp-2-8-7-x-huawei-p8lite-qcom-t3187758
its right afther this thread
I normally temporarily boot twrp via fastboot boot first to make a complete system backup. I couldn't get a complete backup this way because recovery isn't part of the backup options.
foltz61 said:
I normally temporarily boot twrp via fastboot boot first to make a complete system backup. I couldn't get a complete backup this way because recovery isn't part of the backup options.
Click to expand...
Click to collapse
It isn't part of TWRP for other devices either. Recovery can be backed-up with dd.
I did not know that obviously . TWRP was able to on every device I've ever had. Thanks
foltz61 said:
I did not know that obviously . TWRP was able to on every device I've ever had. Thanks
Click to expand...
Click to collapse
No problemo.
jabonloco said:
do you know where can i download lollipop for ale-04? i cant find anything
Click to expand...
Click to collapse
http://consumer.huawei.com/us/support/downloads/index.htm
kimtyson said:
http://consumer.huawei.com/us/support/downloads/index.htm
Click to expand...
Click to collapse
How do you apply this .rar file to update to lollipop?
sockey said:
How do you apply this .rar file to update to lollipop?
Click to expand...
Click to collapse
You unzip the rar. Place the Dload folder on your device. Shutdown device. Hold volume up and volume down and also power until it boots to the update screen then release buttons. **This will delete your data.** Make a back up.
This might help, http://consumer.huawei.com/us/support/manuals/detail/index.htm?id=54926.
Oh, you're welcome by the way.
---------- Post added at 10:24 AM ---------- Previous post was at 10:17 AM ----------
This is even better than my pidly attempt.
https://community.gethuawei.com/sup.../10/14/p8-lite-android-l-update-now-available
sockey said:
How do you apply this .rar file to update to lollipop?
Click to expand...
Click to collapse
check this http://forum.xda-developers.com/p8lite/general/lollipop-5-1-stock-rom-update-ale-l04-t3226187
thenameisnigel said:
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG for 2.8.5.0:
-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements
CHANGELOG for 2.8.4.0:
-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
DOWNLOAD:
You can find more information and download links on BasketBuild!
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
[RECOVERY][LOLLIPOP]TWRP2.8.7.X for the Huawei P8 Lite (ALE-L04), Tool/Utility for the Huawei P8lite
Contributors
thenameisnigel, h8rift
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Current Stable Version: 2.8.7.0
Stable Release Date: 2015-09-22
Created 2015-09-23
Last Updated 2015-09-22
Click to expand...
Click to collapse
Download links are dead, can you please fix it? thanks
jabonloco said:
check this http://forum.xda-developers.com/p8lite/general/lollipop-5-1-stock-rom-update-ale-l04-t3226187
Download links are dead, can you please fix it? thanks
Click to expand...
Click to collapse
Download link is updated.
thenameisnigel said:
Download link is updated.
Click to expand...
Click to collapse
thanks!!
how about root? do you know something?
can't find anything yet
edit__________________
just made it, installed supersu thru twrp and i have root acces now
anyone know how i unlock the bootloader on the phone?
Hello,
I tried to root the phone several times without success.
Could you explain how to flash the TWRP without the flashify app?
aniancito said:
Hello,
I tried to root the phone several times without success.
Could you explain how to flash the TWRP without the flashify app?
Click to expand...
Click to collapse
When you unlock the bootloader. you have to make sure that developer options are enabled. Then inside the dev options you need to enable usb debugging and as well as OEM unlock.
1. Boot phone into fastboot
2. open cmd prompt as admin
3. cd to folder location where fast boot is.
4. copy the twrp.img to the same folder where fastboot is.
5. type fastboot flash recovery twrp.img
6. fastboot reboot
--------------------------------------------
to install root reboot the phone holding both + and - volume buttons at the same time to reboot into twrp and flash the beta zip of super su. after that you should be able to do with your phone what you please.
https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
You have to do this:
1- make a folder in your sd called "dload"
2- unzip trasfer package (kk to LL) and put the update.app on the folder "dload"
3- shutdown your phone, then press volume + and power till it start installing the transfer package
repeat all 3 steps but using the LL file.
I'm having troubles with the download... is the link really up?
it throws a 404 error
narigondelsiglo said:
I'm having troubles with the download... is the link really up?
it throws a 404 error
Click to expand...
Click to collapse
The link from post #12 is what worked for me. The link on the main post is still 404 but you can verify the md5 sums and they are they same file.
https://basketbuild.com/filedl/devs?dev=TheNameIsNigel&dl=TheNameIsNigel/PACMan/alice/twrp.img

Categories

Resources