Database Develop

[question] root epe54b without touching boot loader for 2.2

I've seen the threads about rooting without unlocking, but I have a more specific question.
Could I root and flash to 2.2 without unlocking while reserving the option to flash back to completely stock including stock recovery and not touching boot loader back to 2.1 update 1.
I am asking specifically for epe54b on att. I've seen most threads were targeted for t mobile versions of n1.
Thanks for your help and pointing me in the right direction.
I really want my warranty kept intact.
Sent from my Nexus One using XDA app.

Another quick question, should I attempt to change the radio as well?
Sent from my Nexus One using XDA App

viper2g1 said:
Another quick question, should I attempt to change the radio as well?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
why don't you first try to see if adb can see you device in recovery first? 'cos i cannot
seems like that is the showstopper for me

So I tried what you suggested and I was unable to get into recovery, here are the steps I performed:
Step 0:
- Install the SDK
- Make sure there is no "update.zip" in SD card
- Connect your phone with the USB
- Extract all files I provided to your <SDK>/tools
Step 1:
Enable Debugging in Setting->Development
Then, shut down your phone
Step 2:
Booting into bootloader by holding vol- and press Power
Use vol- button to highlight "Recovery"
Step 3:
Open CMD, and cd to the <SDK>/tools
Run "loop"
Step 4:
Press Power to enter Recovery now, you will see the triangle and <!>
Hold Power and vol+ to show the menu
Step 4a:
If your CMD shows you the devices is in recovery, press control + c to stop the "loop"
Step 4b:
If there is nothing, reboot your phone and repeat step 2-4 until it shows up.
(This is 99% caused by the sd card, faster card make it easier to show up)
Click to expand...
Click to collapse
So is that it or should I try something else? Maybe a different SD card?

viper2g1 said:
So I tried what you suggested and I was unable to get into recovery, here are the steps I performed:
So is that it or should I try something else? Maybe a different SD card?
Click to expand...
Click to collapse
try without SD card first...
EDIT: you mean you cannot get into recovery or you cannot get adb to see your phone?

Problem was with adb seeing the phone. N1 went into recovery fine
Edit: I am able to see the device when it is powered on normally, but when I boot to recovery the device does not show up - SD card removed, driver set to sdk driver..
Sent from my Nexus One using XDA App

viper2g1 said:
Problem was with adb seeing the phone. N1 went into recovery fine
Edit: I am able to see the device when it is powered on normally, but when I boot to recovery the device does not show up - SD card removed, driver set to sdk driver..
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
that's exactly the same problem that i have....
guess we are stuck for now unless the official OTA for FRF83 will save the day...

I was afraid of that, well thanks for trying to help anyway

viper2g1 said:
I was afraid of that, well thanks for trying to help anyway
Click to expand...
Click to collapse
no worries, i also hope someone with a EPE54B can succeed too, but i guess we can only try again after we get the official OTA for FRF83...

kaiser_tytnii said:
no worries, i also hope someone with a EPE54B can succeed too, but i guess we can only try again after we get the official OTA for FRF83...
Click to expand...
Click to collapse
I am quite sure you guys can gain root shortly

Booker-T said:
I am quite sure you guys can gain root shortly
Click to expand...
Click to collapse
Yup let's work it out!
Sent from my Nexus One using XDA App

I heard it will be FRF85B for us EPE54B users. Hope root without unlock will still be possible. Google sucks in differentiating software builds for the same hardware (except for the radio!)...

[FIX] Enable download mode by force adb push update.zip without permission

MY Phone Condition:
My phone was previously install with voodoo rom and use clockwork recovery to restore to my stock rom that i backup and it crash half way.
My phone was hardware lock this mean no matter how i press the volume and power button , i will never get into download mode. non of the method posted work !
My phone cannot use "adb reboot download" because there is no OS and it was stuck in the recovery loop.
It does not have clockwork recovery because i formatted my internal sdcard
If i do have clockwork recovery and i use restore image or install new from zip , i still stuck in the recovery mode after reboot several times.
My phone does not mount to internal sdcard because i don't even know what i did on this part.
I believe i screw up my partition of the phone.
DO IT AT YOUR OWN RISK.
You need the Samsung USB driver and you can get it from Here
http://forum.xda-developers.com/showthread.php?t=728929
First Part
1. Download update.zip from the link below. This was post by another member.
The post is here http://forum.xda-developers.com/showthread.php?t=804305
2. Place the update.zip in tools folder so you can push it into your phone by using adb command
3. Plug usb into the phone and your phone should be on the Android system recovery <2e>
4. Use your volume button to select reinstall package, don't press power button yet.
5. constant "adb push update.zip /sdcard" from computer , you will get permission denied.
6. While you are constantly pushing the adb command from computer. press the power button on the phone so it install update.zip from sdcard.
7. This is the part where it force adb push into sdcard without permission
8. once the update.zip install completed. unplug the usb cable from the phone and take the battery out.
9. put the battery back to the phone then press on both volume button.
10. While holding both volume button , plug in your usb cable and it will boot to download screen.
If you need use Odin to flash your phone to original stock rom. Go to the Second Part

Second Part:
If you get black screen with only 4 light on the bottom after flashing from Odin.
Follow http://forum.xda-developers.com/showthread.php?t=728698
There should be T959-PDA.tar,T959-CSC.tar and T959-Phone.tar within the package.
Check "Re-Partition" , "Auto Reboot" and "F.Reset Time" check box. Use the PIT 0512 version. Use "PDA", "PHONE" and "CSC" from the link above.
After flashing with Odin, you will loose the download mode. repeat the first part and you are good to go.
Here is the link on rooting the phone
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Samsung_Galaxy_S_(Vibrant)

If your phone is hardware locked, how are you able to get into recovery? Hardware locked phone means no recovery and download mode.
Sent from my SGH-T959 using XDA App

mr2t32 said:
If your phone is hardware locked, how are you able to get into recovery? Hardware locked phone means no recovery and download mode.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my hardware lock mean cannot use the button method to get into download mode and using adb reboot download does not help too.

Im pretty sure hardware lock does not mean no recovery. Just no button download mode
Sent from my SGH-T959 using XDA App

you saved my life man. thank you so much. this was the only thing that worked, after days of frustration

No, it means both.
Sent from my SGH-T959 using XDA App

muncknr said:
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
Click to expand...
Click to collapse
i was about to give up. i was trying to push update.zip and do adb reboot download left and right and no luck untill i found this method. It took me a week to figure it out

wildklymr said:
No, it means both.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my recovery was working because i was stuck in the a loop. ya , this update.zip pretty much do both download mode and recovery mode.

What the point of this? Does the other thread not cover this??

Master™ said:
What the point of this? Does the other thread not cover this??
Click to expand...
Click to collapse
Are you asking or you are insulting ?

jaex said:
Are you asking or you are insulting ?
Click to expand...
Click to collapse
probably asking. Considering there is another thread on the same topic that has been on the front page for over a week now, with several pages of replies.
http://forum.xda-developers.com/showthread.php?t=804305
EDIT: So you were bricked and hardware locked and got yourself out of it? If thats the case then yets its different than that thread and why didn't you just come out and say it?

nermie said:
probably asking. Considering there is another thread on the same topic that has been on the front page for over a week now, with several pages of replies.
http://forum.xda-developers.com/showthread.php?t=804305
EDIT: So you were bricked and hardware locked and got yourself out of it? If thats the case then yets its different than that thread and why didn't you just come out and say it?
Click to expand...
Click to collapse
You figure it out after all. I already stated the condition of my phone ! My phone was pretty bricked at that point. There is way for me to push any files into the phone because i don't have permission and my phone will not go to download mode by using the volume button. It just stuck at recovery mode.
There are guide out there teach you to use "adb push download". This method only work if you are in your phone and you turn on debug mode. My phone crash at the clockwork recovery bootloader. Then i formated my internal sdcard that hold the clockwork. next i push a stock update.zip that does not have su and busybox so i lost the capability to push anything into the phone.
no download mode , no permission, no sdcard --> You tell me how can i use the method that post few week ago ?

muncknr said:
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
Click to expand...
Click to collapse
Thank You

Thank ! You save my phone !

unfortunately, i was one of those careless people to brick my phone via Voodoo.
Firstly, i tried to "FLASH" the disable_voodoo zip file via Clockwork, i put it in root, and never created any folders. i knew i had to disable voodoo before flashing but my steps were wrong.
sadly enough, my phone was also HW locked, so i got it exchanged. now im not using voodoo YET and i my new vibrant can handle OC and has the recovery/download mode via buttons.

atlaswingpasaway said:
unfortunately, i was one of those careless people to brick my phone via Voodoo.
Firstly, i tried to "FLASH" the disable_voodoo zip file via Clockwork, i put it in root, and never created any folders. i knew i had to disable voodoo before flashing but my steps were wrong.
sadly enough, my phone was also HW locked, so i got it exchanged. now im not using voodoo YET and i my new vibrant can handle OC and has the recovery/download mode via buttons.
Click to expand...
Click to collapse
i use shell to create the file that disable voodoo. after disable voodoo , i was able to do restore and install new rom unfortunately after restore or install new rom , it still reboot into recovery.

I also forgot to disable voodoo, and this was before there were fix instructions posted. So i basically effed up my phone to the point of being stuck in the samsung recovery loop, no hardware download mode, no clockwork recovery, no update.zp, no adb download.
I really thought I had completely bricked my phone, I tried this just out of desperation and what do you know, push update.zip over and over and click and it goes through, which allowed me to get into download mode.

muncknr said:
I also forgot to disable voodoo, and this was before there were fix instructions posted. So i basically effed up my phone to the point of being stuck in the samsung recovery loop, no hardware download mode, no clockwork recovery, no update.zp, no adb download.
I really thought I had completely bricked my phone, I tried this just out of desperation and what do you know, push update.zip over and over and click and it goes through, which allowed me to get into download mode.
Click to expand...
Click to collapse
nice , you just have to re-root and install the new rom again , if it brick again , just use this method and you are good again.many of us forgot to disable the voodoo before we restore or install new rom and this crashes the phone.

Need some help really bad
Ok so I have a similar situation as you did (OP), only mine is a bit worse... In my irrational "in the moment" fear of the situation, I used adb reboot recovery to get into recovery mode (HW locked phone) and I did the option that deletes all the **** on the phone and restores the phone to its original format (I think it reinstalled the OS or something, because it looks brand new). So now, whenever I boot up, it does the annoying black screen with the 4 glowing buttons thing for a while, and then eventually the OS actually shows up on the screen. Then it does "scanning media" thing over and over again, but thats not the main problem. I figured, hey this isnt so bad atleast I found your thread and would be able to use your method to help restore my phone... the problem is that somehow my "settings" button is totally gone from the app menu, and I cant get it into debug mode, so I cant use either adb or your method or ANYTHING!! My phone is practically bricked as I cant do anything because its constantly laggy and turns back to the black screen thing, and then when it is showing the homescreen I cant do **** because even swiping to another screen takes like 5 minutes to do cause its so laggy. So basically I ****ed up, and I really need some help.. Im kinda a noob at this whole thing and im really outa options as far as I can tell.. does anyone know what I can do to repair my phone? Thanks!

[Solved] Nexus one stuck on Colored X

hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Ok let me tell you if u have the same problem than do as the steps..
i had this problem after googling long time i found this solution ..
1st check ur hboot 0.33 or 0.35??
my hboot is 0.35.0017 and i am on froyo 2.2 stock is FRF91.
just download the PASSIMG for FRF91 from
http://shipped-roms.com/download.ph...on_KT_KR_2.15.1010.2_FRF91_release_signed.zip
after download rename it "PASSIMG.zip" than put it on root of sd card..(formatted by fat32)
now put phone is bootloader mode by pressing vol up + power button
than fastboot verifies passimg file and ask you to flash this rom
now press vol up (yes)
than wait for 5 min to flash this rom on ur nexus one..
reboot and wait for 5min and it and done...
if u still not boot normal than again go to boot mode
select recovery
when u see trangle logo and android than press vol up +power buttong
than recovery menu show up
than wipe user data
and wie user catche
reboot
done..

swapniladsure said:
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Click to expand...
Click to collapse
Have you tried booting into recovery? Power+volume down...

Did you try to boot without the SD card? It helped me once.

Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask

i cant able to access recovery mode
Hollow.Droid said:
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
Click to expand...
Click to collapse
hey friends..
i can access bootmode but when i select recovery option by selecting power button than phone get restart and shows 4 color X again...
than i have flash to recovery "RA nexus one v2.1" to install custome rom...
but same it get restart when we select recovery option
help me what to do

Wipe everything and see if that does it.

Carloswithac said:
Wipe everything and see if that does it.
Click to expand...
Click to collapse
how to wipe??
where is wipe option...let me tell u that i cant able to access recovery menu ..without recovery menu i cant wipe or flash the phone??
is that true?

If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken

i cant able to access recovery
rugmankc said:
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
Click to expand...
Click to collapse
dude i cant able to access recovery menu...
when i press power button to get in recovery menu my phone get restart ....and stuck on 4 color X logo...
is there any solution to access recovery menu?? ..my phone get restart when click on recovery on bootloder

Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken

rugmankc said:
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
Click to expand...
Click to collapse
i have flash recovery file of amon 2.1.1 but after flash recovery problem not solved......it still get restart when i select recovery from bootloder mode...
help me

I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help

rugmankc said:
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
Click to expand...
Click to collapse
okkkk
thanks

Why does this thread say solved??
Just restore a stock image.
Follow the wiki guide for unroot/restore. Use the passimg method, with the FRG33 zip, which can be found by following the link on the word "here" on step 2...
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus
Sent from my Nexus One using XDA App

I see you solved it on another forum... :-/
Sent from my Nexus One using XDA App

Thanks for your input DR
The back to stock and passimage was where I was thinking he needed to go. But, know nothing about doing that without a lot of research of my own.
Anyway glad he got it--what did he do to fix
ken

Looks like he did exactly what I posted. Funny thing was, it was a thread on another forum, where I had suggested the same thing to someone else, and he'd picked up the trail... xD
Sent from my Nexus One using XDA App

Glad he got it anyway

THANK YOU
Thanks man you r great , i have spend 24 hrs on this but only your method works . Thanks again
really really thanks
you saved my 3000 bucks

Where can i find fastboot instructions?

Restoring the Streak 7 using NVFlash

Restoring the Streak 7 using NVFlash
This will bring your device back to the unrooted 2.2.2 stock ROM. This has only been tested by the OP (me) on a T-Mobile 4G version. If you use this on other models, I cannot guarantee it's usefulness.
(Windows Only Instructions) If you’re a Linux user, you should be able to 'translate' this yourself.
This is for those who cannot use fastboot or adb. If you can successfully use these tools, DO NOT use NVFlash. You will lose all your data on your device. Do not proceed with these instructions if you are not expecting to lose all personal data on the device.
Step 1) APX Drivers – To work in NVFlash mode you need to install the drivers for the nvidia boot-recovery device. Power off your device and disconnect it from the computer. Hold down the Volume up & down buttons while plugging in the USB cable. (Or leave the USB cable attached and hold the pinhole ‘power off’, hold down the volume Up & Down and release the pinhole ‘power off’.) (The volume button seems like a rocker switch, but you can hold down both sides at once)
Your computer should now recognize the Streak 7 as an APX device. Manually install it using the nvidia boot-recovery drivers.
NVFlash
http://www.4shared.com/file/SewzEdtV/nvflash.html
Nvidia Boot-Recovery Drivers
http://www.4shared.com/file/-utyTYcJ/usbNvidiaBootdriver.html
Step 2) Install NVFlash. For ease of function simply create a folder on your C:\ drive called ‘nvflash’. Download the nvflash zip and extract it to the nvflash folder.
Step 3) Download the 13 img files that make up the original partitions of the device. Files p2.img through p14.img. Put these files in the C:\nvflash folder. ***You can skip the 14.img file (Don't put it in the NVFlash folder) if you want to attempt to keep your original internal SD Card data, but again, no guarantees.
IMG File Mirrors:
(.zipx file containing P2 through P22 - 387 MB)
Hotfile:
http://hotfile.com/dl/120032619/5858...7Img.zipx.html
DepositFiles:
http://depositfiles.com/files/8zkfcfkhh
FileSonic:
http://www.filesonic.com/file/114412...treak7Img.zipx
Original System File Mirrors:
(.zipx file containing Boot, System, Recovery and Animation - 125 MB)
Hotfile:
http://hotfile.com/dl/120032773/df86...stem.zipx.html
DepositFiles:
http://depositfiles.com/files/u9s1drd9j
FileSonic:
http://www.filesonic.com/file/114412...rigSystem.zipx
Alternate source:
Img files
http://www.4shared.com/file/R-Zl7jSj/p2_online.html
http://www.4shared.com/file/iR-8FbSp/p3_online.html
http://www.4shared.com/file/rBpYOv5r/p4_online.html
http://www.4shared.com/file/fYTvjnck/p5_online.html
http://www.4shared.com/file/mWE-yz8n/p6_online.html
http://www.4shared.com/file/PCRtISra/p7_online.html
http://www.4shared.com/file/hhjX5hj2/p8_online.html
http://www.4shared.com/file/IK8GXafe/p9_online.html
http://www.4shared.com/file/r5dQ9vhx/p10.html
http://www.4shared.com/file/yaMPAoxE/p11.html
http://www.4shared.com/file/gtjvMcsH/p12.html
http://www.4shared.com/file/jZKIWx1Z/p13.html
http://www.4shared.com/file/nnELROLc/p14.html
http://www.4shared.com/file/LLFPuE0C/p16.html
http://www.4shared.com/file/pDw8TwjJ/p18.html
http://www.4shared.com/file/TxL33jOv/p19.html
http://www.4shared.com/file/oiZevyl9/p20.html
http://www.4shared.com/file/9WizbDai/p21.html
http://www.4shared.com/file/fairIFEW/p22.html
Step 4) Launch (double-click) the Restore.bat file from the C:\nvflash folder. This batch command will begin copying the partitions to the device. Wait patiently as your device is being restored.
Step 5) Once all of the partitions have been written, use the pinhole ‘power off’ button next to the SD card to power off the device. Now power it back on normally to enjoy your restored Streak 7.
If you have trouble with any of the links or corrupted files, please pm me or reply to this thread.
That's all I can do folks. Ran out of free space on my free storage site.
*** Update *** If you are still stuck at boot logo, check to see if you can get into fastboot mode, if so,
finish restoring with the fastboot method.
************* Also, I recently used this method to restore from Honeycomb. I too was again stuck at the Dell logo. However, I was able to use the recovery menu (Vol Up + Power) and do a factory reset and was fine from there.
Original System Files
Boot
System
Recovery
T-Mobile Boot Animation

There may still be an issue with some units restarting as if no files had been written. If this is your experience, please let me know and I will start a new thread for that issue. Good luck!

illdill said:
There may still be an issue with some units restarting as if no files had been written. If this is your experience, please let me know and I will start a new thread for that issue. Good luck!
Click to expand...
Click to collapse
link for img 14 isnt working

graffixnyc said:
link for img 14 isnt working
Click to expand...
Click to collapse
Figured it might fail. Its the biggest one and it dropped a few times in the transfer. Will give a heads up when it is available. Might not be till the morning.

I was able to restore my boot and recovery partitions using the files you have already provided. Thanks for the excellent work. I am now using Clockwork to finish the job for the system recovey.

Thank you so much for sharing.
Downloaded files and waiting for p14.

im having trouble downloading p11 also. tried flashing all but p11, but nothing has changed!?!? thanks for sharing
edit: did finally get p11 to download, tried again, still no change. everything said it went fine on nvflash, but streak 7 still stuck in apx mode?

So- I have gone from a corrupted system that would boot with no fastboot or recovery mode into an operating environment that was unusable due to repeated force closures. Now thanks to these files I have been able to restore my system and finally apply Steve's 2.2.2 rooted with clockwork. Thanks to Illdill, Steve and everyone on the forum!

jesus2282 said:
im having trouble downloading p11 also. tried flashing all but p11, but nothing has changed!?!? thanks for sharing
Click to expand...
Click to collapse
You will need the p11 for a successful restore. p14 may not be required as some have had success without it. Keep trying for the p11 file. It may be an issue with the online storage site I chose, or if you could use a download manager, that may help.

graffixnyc said:
link for img 14 isnt working
Click to expand...
Click to collapse
Give it a try without p14 and let me know what you get?

jesus2282 said:
im having trouble downloading p11 also. tried flashing all but p11, but nothing has changed!?!? thanks for sharing
edit: did finally get p11 to download, tried again, still no change. everything said it went fine on nvflash, but streak 7 still stuck in apx mode?
Click to expand...
Click to collapse
What happens when you use the pinhole to power it off then attempt to power it on normaly?
Also, are you using the flash.cfg, flash.bct, fastboot.bin and bootloader.bin from the nvflash.zip I provided?

tried 3 times, seem still cant get pass the boot screen. question, when i press up + down and plug in the usb, nothing happen but the buttons lights up... then i clicked restore and it runs all 12 files.... then i reboot.... still stuck at boot screen...

n0906 said:
tried 3 times, seem still cant get pass the boot screen. question, when i press up + down and plug in the usb, nothing happen but the buttons lights up... then i clicked restore and it runs all 12 files.... then i reboot.... still stuck at boot screen...
Click to expand...
Click to collapse
Yes, nvflash mode should only give you the back, menu and home lights. Screen will remain black.
Can you get into fastboot or recovery?

illdill said:
Yes, nvflash mode should only give you the back, menu and home lights. Screen will remain black.
Can you get into fastboot or recovery?
Click to expand...
Click to collapse
i can... so u saying i can have it fix if i can get into either?

n0906 said:
i can... so u saying i can have it fix if i can get into either?
Click to expand...
Click to collapse
Yes If you can get into fastboot you can flash the system, recovery and boot images.

illdill said:
Yes If you can get into fastboot you can flash the system, recovery and boot images.
Click to expand...
Click to collapse
AWESOME! but i tried look for those post and tried few weeks already.... no luck at all, i did follow every steps..... any post suggestion?

n0906 said:
AWESOME! but i tried look for those post and tried few weeks already.... no luck at all, i did follow every steps..... any post suggestion?
Click to expand...
Click to collapse
Try this thread
http://forum.xda-developers.com/showthread.php?t=938824

If anyone can provide an alternate download source for the p14 image please post here and I will add it to the how-to.
Thanks in advance.
Sent from my Dell Streak 7 using XDA Premium App

worked for me without p14 Thanks man! Although I have a replacement coming.. at least I can play with it, configure it the way I want again then back it up, then when the new one comes just restore it to that one

Oh and another thing.. everything on my internal sd card was still there! All the files that were there that I downloaded, my titanium backups, clockwork recovery back ups.. all of that was there

3.41 bootloader info from google support

Well I decided to call Google about the boot loader recovery not working as it should. I was hoping this call would help them to work on another update but they say that's the way its supposed to work. Here's the email Instructions:
1. Power down your device
2. Press and hold both volume keys and the power button to enter
Bootloader mode
3. Press the volume keys to cycle to the Recovery mode option
4. Press the power button to select Recovery mode
5. From the Recovery mode screen, press and hold the Power button then
press the Volume up button.
6. Use the volume buttons to select wipe data/factory reset.
7. Select Yes -- delete all user data.
8. The factory data reset process will now start. Once its finished,
select 'Reboot system now.'
The only option we have in the new recovery is to wipe data. Maybe for those having problems accessing twrp or cwm will be able to a access it with step 5. I don't know haven't rooted yet. So I decided to ask about nvflash and they said they're not going to release any nvflash tools or files.

um, yup. thats how stock bootloader and stock recovery work. lol
whats the issue? if your not even rooted, you wouldn't even know if you have an issue or not with the new bootloader.

Are you saying that you can't flash a different recovery? Or that when you do you still get the same stock recovery? I'm not quite sure what the issue is here, because that is exactly how the stock bootloader, and recovery are supposed to work.
Are you making sure to unlock fastboot before trying to flash recovery. I don't recall seeing or hearing anyone say anything about not being able to get to clockwork mod once its installed.

xjman said:
Are you saying that you can't flash a different recovery? Or that when you do you still get the same stock recovery? I'm not quite sure what the issue is here, because that is exactly how the stock bootloader, and recovery are supposed to work.
Are you making sure to unlock fastboot before trying to flash recovery. I don't recall seeing or hearing anyone say anything about not being able to get to clockwork mod once its installed.
Click to expand...
Click to collapse
No. I saw people posting they couldn't get go cwm and could only see the red exclamation point. And I was just saying maybe after choosing recovery then holding volume up and power it would then go to cWm or twrp. I was hoping for someone to try it who is still on 3.41 Recovery. A lot of people downgraded back to 3.39 or whatever version it was

kieso said:
I was hoping for someone to try it who is still on 3.41 Recovery. A lot of people downgraded back to 3.39 or whatever version it was
Click to expand...
Click to collapse
I can confirm that to get in to the stock recovery you hold down 'power' and then tap 'vol up'.
At present I am running the latest CWM touch recovery. This boots straight into it from the bootloader without any extra button presses.
My personal preference to go into CWM is from either QuickBoot or ROM Manager.
Sent from my Nexus 7 using xda app-developers app

smirkis said:
didn't know being informed makes me an asshole. stupid me, reading and understanding.
for what its worth, im on the newest bootloader, and selecting recovery goes straight to twrp. which is the recovery i installed.
Click to expand...
Click to collapse
I wonder why some on 3.41 can't go straight to twrp and some can. Sorry for the ahole comment I thought you were trying to be a smartass towards me. I'm just trying to find out as much info from people before I root. I am experienced at flashing and a little adb but I just read a lot of HELP BRICKED MY NEXUS posts. Did you use wugs toolkit or adb to unlock and root?

mr_tris said:
I can confirm that to get in to the stock recovery you hold down 'power' and then tap 'vol up'.
At present I am running the latest CWM touch recovery. This boots straight into it from the bootloader without any extra button presses.
My personal preference to go into CWM is from either QuickBoot or ROM Manager.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the info. I'm going to try unlocking and rooting when I get home. I really want to use the OTG cable and the 720p mod.

kieso said:
I wonder why some on 3.41 can't go straight to twrp and some can. Sorry for the ahole comment I thought you were trying to be a smartass towards me. I'm just trying to find out as much info from people before I root. I am experienced at flashing and a little adb but I just read a lot of HELP BRICKED MY NEXUS posts. Did you use wugs toolkit or adb to unlock and root?
Click to expand...
Click to collapse
When I first flashed TWRP onto my Nexus 7 after that official 4.1.2 OTA update, I wasn't able to boot into it. I then flashed it again via fastboot, and then booted the TWRP image that was on my computer, and then TWRP loaded.
I believe TWRP does work normally now as well (I can boot into it and reboot into it).

kieso said:
I'm going to try unlocking and rooting when I get home.
Click to expand...
Click to collapse
Well if I was you I'd just use mskips toolkit, its absolutely epic it'll save you a lot of farting around. I take it that your fully updated? ( Not that it matters) You seem to know and understand your way around adb so just go for it and enjoy.
Its works smooth as silk and save you a lot off time. The options available to you are just staggering!
http://forum.xda-developers.com/showthread.php?t=1809195
Sent from my Nexus 7 using xda app-developers app

Thread Cleaned​
No need for personal insults, lets just try to help each other out and show each other some respect.​

going to recovery from bootloader works fine after 3.41.....wat r u talkin abt? (i m stock rooted+twrp)
oh yea...u hav 2 remove that recovery stock.p file thingy first.

There are plenty of people that are having issues with recovery on 3.41 bootloader.... Its confirmed some have it some don't.
The issue is that with 3.41 bootloader on some Nexus 7 Devices a custom recovery is unbootable no matter how you try, every time it will try to load recovery and fail at a black screen then reboot into the OS. It does not matter how you try from ADB reboot to recovery or from bootloader with USB attached or not.

psycho2097 said:
going to recovery from bootloader works fine after 3.41.....wat r u talkin abt? (i m stock rooted+twrp)
oh yea...u hav 2 remove that recovery stock.p file thingy first.
Click to expand...
Click to collapse
Ohh crap I read about that in some thread. Any idea exactly what has to be done. The only way I can get into cwm is with ROM toolbox but I have to reflash cwm every time then hit boot into recovery.

kieso said:
Ohh crap I read about that in some thread. Any idea exactly what has to be done. The only way I can get into cwm is with ROM toolbox but I have to reflash cwm every time then hit boot into recovery.
Click to expand...
Click to collapse
In your system folder there's a file called 'recovery-from-boot.p'
Go into a file manager with w/r access and rename it ' recovery-from-boot.p.bak'
When the system boots it reads that file and resets the recovery to stock, by changing the name you remove the problem.
Sent from my Nexus 7 using xda app- app developers

mr_tris said:
In your system folder there's a file called 'recovery-from-boot.p'
Go into a file manager with w/r access and rename it ' recovery-from-boot.p.bak'
When the system boots it reads that file and resets the recovery to stock, by changing the name you remove the problem.
Sent from my Nexus 7 using xda app- app developers
Click to expand...
Click to collapse
Thank you for all the help! I appreciate it.

kieso said:
Thank you for all the help! I appreciate it.
Click to expand...
Click to collapse
No problem, a click on the 'Thanks' button for me and my colleagues on this thread would really make our day. :thumbup:
I hope you get sorted mate, I wouldn't be able to sleep at night until I got custom recovery working properly on any of my devices!
Sent from my Nexus 7 using xda app-developers app

i tried changing the name of the file, but.. after reboot, the tablet gets stuck on google screen, recovery never loads... any suggestion? Thanks =)