Database Develop

Help me rooting my sgs i9000 runnin value pack 2.3.6

Hey guys am new to dis forum and I wanna root my sgs i9000
its an indian version phone n here r d details
PDA - i9000ddjvb
Phone - i9000ddjv7
Csc - i9000ddjvb
Firmware version - 2.3.6
Baseband version - i9000ddjv7
Kernal version - [email protected]#2
Built num - gingerbread.ddjvb
Pls help me n pls provide me step by step instructions as am an begginer n wanna root my handset .. pls help me out guys
Thanks.

afaik there's no rooted kernel for this rom.
you can try that, anyway.
1 - google for "odin" and download it on your pc. or take this http://forum.xda-developers.com/showthread.php?t=1464775
2 - similarly, install samsung kies (so you have samsung drivers)
3 - download semaphore_2.7.4_sc.tar kernel http://forum.xda-developers.com/showthread.php?t=1112908
4 - download original kernel from ramad's thread http://forum.xda-developers.com/showthread.php?t=1102881
4 - turn off your phone, that press power+volume_down+home until you enter download mode (yellow pic on screen)
5 - run odin.exe (as administrator in win7). make sure kies is not running on your pc before running odin.
6 - connect your phone to pc via usb
7 - in odin select as "pda" the semaphore kernel. leave all options as defaults. execute it. this is done in a few seconds. this way you are rooting you phone (aka adding busybox) and installing superuser.apk
8 - unplug usb.
9 - let the phone reboot. then turn it off back again, and get once again in download mode (power+volume_down+home).
10 - run odin.exe (as administrator in win7)
11- connect phone to pc via usb
12 - in odin select ramad's jvb kernel as "pda". execute.
13 - start phone, to be sure reinstall superuser from google play
14 - you're done, now you are rooted with original jvb kernel.
I do not know if this is a robust procedure, but it worked for my italian jw7 rom, hope it is ok for you too.
after gaining root privileges, you can remove semaphore.apk from /system/app with root explorer (download from google play)

Do u think it ll work
lcampori said:
afaik there's no rooted kernel for this rom.
you can try that, anyway.
1 - google for "odin" and download it on your pc. or take this http://forum.xda-developers.com/showthread.php?t=1464775
2 - similarly, install samsung kies (so you have samsung drivers)
3 - download semaphore_2.7.4_sc.tar kernel http://forum.xda-developers.com/showthread.php?t=1112908
4 - download original kernel from ramad's thread http://forum.xda-developers.com/showthread.php?t=1102881
4 - turn off your phone, that press power+volume_down+home until you enter download mode (yellow pic on screen)
5 - run odin.exe (as administrator in win7). make sure kies is not running on your pc before running odin.
6 - connect your phone to pc via usb
7 - in odin select as "pda" the semaphore kernel. leave all options as defaults. execute it. this is done in a few seconds. this way you are rooting you phone (aka adding busybox) and installing superuser.apk
8 - unplug usb.
9 - let the phone reboot. then turn it off back again, and get once again in download mode (power+volume_down+home).
10 - run odin.exe (as administrator in win7)
11- connect phone to pc via usb
12 - in odin select ramad's jvb kernel as "pda". execute.
13 - start phone, to be sure reinstall superuser from google play
14 - you're done, now you are rooted with original jvb kernel.
I do not know if this is a robust procedure, but it worked for my italian jw7 rom, hope it is ok for you too.
after gaining root privileges, you can remove semaphore.apk from /system/app with root explorer (download from google play)
Click to expand...
Click to collapse
do u think it ll work coz if ders any danger of bricking my phone i won try pls help me out or else suggest me to downgrade and den root .. pls help me out

vitesh said:
do u think it ll work coz if ders any danger of bricking my phone i won try pls help me out or else suggest me to downgrade and den root .. pls help me out
Click to expand...
Click to collapse
since your phone is not rooted you have to use odin anyway.
"superoneclick" methods do not work with sgs1.
hence, you have to flash a pre-rooted kernel to gain root permissions.
after that you can flash the original kernel thus restoring the original state of the phone, apart from rooting it. you don't lose any data or setting, by the way.
since it looks like you're a cautious guy, I suggest you to study a little bit more thru the forum to understand how flashing kernels with odin works.
you can start by downloading odin, kies, and both kernels, and the whole original rom (you can find that in ramad's thread as well). Ramad's thread explains exactly how to flash with odin, btw.
I'm glad to help, but I'm not taking any responsibility on your behalf. do it at your own risk.

thanks broo ..
lcampori said:
since your phone is not rooted you have to use odin anyway.
"superoneclick" methods do not work with sgs1.
hence, you have to flash a pre-rooted kernel to gain root permissions.
after that you can flash the original kernel thus restoring the original state of the phone, apart from rooting it. you don't lose any data or setting, by the way.
since it looks like you're a cautious guy, I suggest you to study a little bit more thru the forum to understand how flashing kernels with odin works.
you can start by downloading odin, kies, and both kernels, and the whole original rom (you can find that in ramad's thread as well). Ramad's thread explains exactly how to flash with odin, btw.
I'm glad to help, but I'm not taking any responsibility on your behalf. do it at your own risk.
Click to expand...
Click to collapse
hey i followed d way u said n it worked smoothly .. thanks a loy bro .. and now u can u tell me how to go for a custom rom and upgrade my handset to ICS is it possible or do i need to make any more chnges to my handset .. lemme no asap .. thans in advance ..

I thought you wanted to root the phone for basic mods and removing samsung bloatware, not for flashing a custom rom. That's another matter.
if you want to flash a custom rom you need cwm recovery. this is a tool you get in "recovery mode", turn phone off and then power+volume_up+home to get there. some gingerbread custom roms can be flashed with odin, but as far as I know, you can't for ics or jb.
stock recovery won't let you flash any rom.
you do not have cwm recovery on your stock kernel.
to root any custom rom, you have to flash semaphore back again, and stick with that. with semaphore you have cwm recovery, so choose the rom you want to install and follow its thread instructions.
BUT: I've tried LOADS of custom roms, and never been fully satisfied with anyone of them. reboots, phone turns off by itself, limited functionalities, small bugs...
always reverted back to (rooted) stock. I'm never ever going to flash any rom but a stock one anymore. Of course you'll find different opinions on that on xda, this is just my 2 cents.
Lastest stock roms (2.3.6) are fast, smooth and completely bugfree.

Thanks in advance
hey thnks in advance but one of my frns has rooted to ics n he is telling tat phone works smoothly only for video recording and another one app .. rest works fine for him

anything for ram space .. i just have 364 mb ram wich gets almost full quite aftr using d net or running any apps .. pls suggest me any app or anythin wich i can do to increase my ram storage and other things ..

vitesh said:
anything for ram space .. i just have 364 mb ram wich gets almost full quite aftr using d net or running any apps .. pls suggest me any app or anythin wich i can do to increase my ram storage and other things ..
Click to expand...
Click to collapse
search threads for himem kernels. you'll find many of them. you'll probably get another 20 or 30mb. but I'm not going to suggest something I've never tried. current ram to me is more than enough.
regarding ics being faster and smoother, that's a matter of debate. my opinion is that the fastest rom around is cm7.2 (gingerbread), much faster than any ics rom. much more. At least among those I've tried.
the whole point about custom aosp roms is that samsung never released source code on some drivers, hence the little bugs here and there in cm7/9, ics, jb, and so on. that's why stock roms are superior, imho.
if you really want ics, move to sgsII or sgsIII

Rooting query
vitesh said:
Hey guys am new to dis forum and I wanna root my sgs i9000
its an indian version phone n here r d details
PDA - i9000ddjvb
Phone - i9000ddjv7
Csc - i9000ddjvb
Firmware version - 2.3.6
Baseband version - i9000ddjv7
Kernal version - [email protected]#2
Built num - gingerbread.ddjvb
Pls help me n pls provide me step by step instructions as am an begginer n wanna root my handset .. pls help me out guys
Thanks.
Click to expand...
Click to collapse
Hi could you kindly share your detailed procedure of rooting the phone ? as well as any custom rom that you tried after rooting.

mailppl said:
Hi could you kindly share your detailed procedure of rooting the phone ? as well as any custom rom that you tried after rooting.
Click to expand...
Click to collapse
you can flash a Semaphore kernel as PDA in Odin 3, and you will have root as well as CWM or you use any other rooting method from My Android Collections

xsenman said:
you can flash a Semaphore kernel as PDA in Odin 3, and you will have root as well as CWM or you use any other rooting method from My Android Collections
Click to expand...
Click to collapse
Thanks , but could you kindly elaborate a bit more about the process, since I am a newbie to this process. Appreciate your patience .
Regards,
Kaustav.

mailppl said:
Thanks , but could you kindly elaborate a bit mhttp://forum.xda-developers.com/showthread.php?t=1778526re about the process, since I am a newbie to this process. Appreciate your patience .
Regards,
Kaustav.
Click to expand...
Click to collapse
Regarding the rooting process, read the first page. Updating to JB,.......
http://forum.xda-developers.com/showthread.php?t=1778526

ierofantis said:
Regarding the rooting process, read the first page. Updating to JB,.......
http://forum.xda-developers.com/showthread.php?t=1778526
Click to expand...
Click to collapse
Wont help I guess .. as its the procedure for flashing the custom ROM, I was looking for the procedure for rooting Galaxy S GT I9000 on DDJVB Gingerbread 2.3.6 Firmware with CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip using ODIN 3 as suggested above.

mailppl said:
Wont help I guess .. as its the procedure for flashing the custom ROM, I was looking for the procedure for rooting Galaxy S GT I9000 on DDJVB Gingerbread 2.3.6 Firmware with CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip using ODIN 3 as suggested above.
Click to expand...
Click to collapse
ok, I wrote this for a Samsung M110S, What and How to Root so instead of the files mentioned, use the correct ones as given earlier or what you have already mentioned
you are going to do the same procedure but use the i9000 files
Files Needed:-
1. odin3
2. rooting kernel
Lets start :-
1- Download odin3 and one kernel file as given above that you wish to use
2- Unplug any USB device attached to your Computer and shut down kies (if running)
3- Power off the phone.
4- Press and hold Home button with Power button. your phone will go into [Download Mode]
5- run Odin in your PC
6- connect phone in download mode with computer using USB cable [ Odin will detect] and Com port will turn Yellow color
7- Check the PDA radio button and browse for file the kernel of your choice that you have downloaded earlier, than click open
8- Press start button. Odin will start flashing and comport button will turn Green and it will inform you to remove USB connection
9- Phone will reboot and you got your phone rooted

xsenman said:
ok, I wrote this for a Samsung M110S, What and How to Root so instead of the files mentioned, use the correct ones as given earlier or what you have already mentioned
you are going to do the same procedure but use the i9000 files
Files Needed:-
1. odin3
2. rooting kernel
Lets start :-
1- Download odin3 and one kernel file as given above that you wish to use
2- Unplug any USB device attached to your Computer and shut down kies (if running)
3- Power off the phone.
4- Press and hold Home button with Power button. your phone will go into [Download Mode]
5- run Odin in your PC
6- connect phone in download mode with computer using USB cable [ Odin will detect] and Com port will turn Yellow color
7- Check the PDA radio button and browse for file the kernel of your choice that you have downloaded earlier, than click open
8- Press start button. Odin will start flashing and comport button will turn Green and it will inform you to remove USB connection
9- Phone will reboot and you got your phone rooted
Click to expand...
Click to collapse
Thanks a ton...going ahead...will let you know in sometime...

just to add to the earlier post, just in case you have never entered download mode before
For i9000 :- you hold the Volume Down + Home + Power
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe

xsenman said:
just to add to the earlier post, just in case you have never entered download mode before
For i9000 :- you hold the Volume Down + Home + Power
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
Click to expand...
Click to collapse
Hi Senman,
I have check and KIES is not running , but facing a issue in Odin3 v3.04 , the COM port is not turning yellow after i connect my phone thru usb in download mode. Anything to do with usb debugging enabled/disabled?
Regards,
Kaustav.

mailppl said:
Hi Senman,
I have check and KIES is not running , but facing a issue in Odin3 v3.04 , the COM port is not turning yellow after i connect my phone thru usb in download mode. Anything to do with usb debugging enabled/disabled?
Regards,
Kaustav.
Click to expand...
Click to collapse
yes, enable USB debugging and restart ODin3, always restart after any flash or problem
Odin v3 will turn blue, not yellow

xsenman said:
yes, enable USB debugging and restart ODin3, always restart after any flash or problem
Odin v3 will turn blue, not yellow
Click to expand...
Click to collapse
Hi Senman... Thanks... followed the procedure and I guess the phone is rooted, I can see the cwm , Super user app, Tweaks app. Anything you would recommend to make the phone faster and lagfree... Thanks again for all the support.

NEED HELP WITH ROOTING # new to this stuff #

I got my wife a Samsung s3 and it ran on att towers but we activated it on straight talk the phone did a update to 4.3 last night and now it has so much stuff running in back ground all I want to do is root the phone to get rid of all the stock stuff that comes on the phone or freez it from running in back ground but that's all I want to do is just that stuff to stop the big drain on battery please help I just want to root phone only for that purpose to stop the big battery drain hope someone can help me with this

Things to note when rooting.
Your phone warranty will be voided meaning samsung won't held responsible for your rooted phone if you decide to send your phone to them if there is any hardware problem.
If you still want to root it, here goes:
1. Download the stock firmware of your phone on sammobile (depends on your country and service provider)
2. Put your phone into download mode (off and on your phone. When it goes to Samsung title screen, press home, off and volume down button at the same time.)
3. Connect your pc to your phone and open odin.
4. Check and see if the message shows pass.
5. Under bootloader, open the md5 file that you downloaded before.
6. Start and wait till it finish.
7. Check your phone and reconfigure as if you have a new phone.
EDIT: This will reformat your phone to the stock rom that Samsung has.
If you want to use custom rom, there are a lot of roms that can be found here:
[INDEX] Samsung Galaxy S3 LTE - ROMs, Kernels, MODs, Recoveries, Themes [30 Jun 2014]

Cranedrio said:
Things to note when rooting.
Your phone warranty will be voided meaning samsung won't held responsible for your rooted phone if you decide to send your phone to them if there is any hardware problem.
If you still want to root it, here goes:
1. Download the stock firmware of your phone on sammobile (depends on your country and service provider)
2. Put your phone into download mode (off and on your phone. When it goes to Samsung title screen, press home, off and volume down button at the same time.)
3. Connect your pc to your phone and open odin.
4. Check and see if the message shows pass.
5. Under bootloader, open the md5 file that you downloaded before.
6. Start and wait till it finish.
7. Check your phone and reconfigure as if you have a new phone.
EDIT: This will reformat your phone to the stock rom that Samsung has.
If you want to use custom rom, there are a lot of roms that can be found here:
[INDEX] Samsung Galaxy S3 LTE - ROMs, Kernels, MODs, Recoveries, Themes [30 Jun 2014]
Click to expand...
Click to collapse
Sorry but this is not the way to root a i9305 dude, your just telling him to install a stock rom that he already has. he needs to root it.
Noob friendly explanation for rooting i9305 with CF auto root
warranty will be void hereby. steps to root the phone in this order:
* download Odin3 v3.09 here, right click and ''open as administrator'' on your pc
* download CF auto root for i9305 here and unzip it to get the CF auto root .tar md5 file
* in Odin, in the option section you should check the boxes of auto reboot / F. reset time and uncheck re-partition!!
* enable usb debugging in your device in developer options, if you dont see developer options, go to ''about phone'' and tap the buildnumber 7 times and developer options should be visible now (this part is not strictly necessary, just in case if your device is not recognized by pc or odin)
* turn off device now, and put it in odin downloadmode by pressing and holding VOLUME DOWN - HOME - POWER buttons at the same time till you see the ''samsung galaxy sIII GT-i9305'' text, then you let go the buttons and it will boot into downloadmode
* in odin, click AP button and select the CF auto root .tar md5 file that you have extracted earlier
* now connect your i9305 to pc with usb cable (in odin under message box, it should say added!)
* now your ready to hit START button, after finished your device will reboot and will be rooted There is a chance that after reboot some message like ''supersu has stopped'' will popup, DONT worry read further...
after you have rooted the device, there will be a app called ''SuperSU''. but its a older version of the app and its ''SU binary'' needs to be updated. go to playstore and under my apps search for supersu, it should state that it needs to be updated, do that and restart your phone
configure the settings of supersu after the reboot as you like.
for deleting or freezing some apps, download Titanium Backup app (pro version recommended for optimal usage) from playstore. open it and supersu will ask you for permission, grand it and your ready to delete or to freeze apps.
Thats all

You can root with:
POOT: This app is a one click root app. No computer needed
Framaroot: Framaroot is a oneclick root app . No computer needed
This is the most popular one!
Z4Root: Z4Root is an oneclick root app . No computer needed
Towelroot: Towelroot is an oneclick root app. No computer needed
Baidu: No information
Vroot: No information
Gingerbreak: This app can root almost all gingerbread devices
Downloads:
Poot - Download the app >>here<<
Framaroot - Download the app inside this XDA Thread - >> CLICK HERE <<
Z4ROOT - Download the app inside this XDA Thread - >> CLICK HERE <<
Towelroot - Download the app inside this XDA Thread - >> CLICK HERE <<
Baidu ROOT - Download the app >> HERE <<
vROOT - Download the app >> HERE <<
Gingerbreak - Download the app inside this XDA Thread - >> CLICK HERE <<
Flash a SU ZIP - Download the ZIP >> HERE << and flash it on your unlocked bootloader phone !
Hit thanks if you liked this post or this post has helped you out !

Dude why you never do any research before asking? There are tutorial on how to root S3 everywhere, yes, I mean EVERYWHERE!

@nikctsh can you send me a link?

AT&T SM-G730A ROM issues? Please Help!

I'm a newbie with the rooting and custom rom installation, I've actually never done one before attempting in on my phone a SM-G730A mini S3, I have searched online and was unable to find the factory rom for this device or instructions how to install.
I was able to root my phone using king root, Then I started removing all the factory programs that ill never used. It was great until a few days ago I removed 2 programs that affected my phone operates. It now gets stuck on the at&t screen when powering on, but the funny thing is that if someone calls me, the screen pops up for me to answer.
Issues with my phone: gets stuck on at&t screen, no home screen at all, only way to access apps is through S voice.
I first started looking into the custom rom because I wanted wi-fi calling since the phone signal is low on this phone. I appreciate any help on this. Thanks

rotorholic said:
I'm a newbie with the rooting and custom rom installation, I've actually never done one before attempting in on my phone a SM-G730A mini S3, I have searched online and was unable to find the factory rom for this device or instructions how to install.
I was able to root my phone using king root, Then I started removing all the factory programs that ill never used. It was great until a few days ago I removed 2 programs that affected my phone operates. It now gets stuck on the at&t screen when powering on, but the funny thing is that if someone calls me, the screen pops up for me to answer.
Issues with my phone: gets stuck on at&t screen, no home screen at all, only way to access apps is through S voice.
I first started looking into the custom rom because I wanted wi-fi calling since the phone signal is low on this phone. I appreciate any help on this. Thanks
Click to expand...
Click to collapse
Any guru's in here that can help?

rotorholic said:
Any guru's in here that can help?
Click to expand...
Click to collapse
I think you should reflash your current firmware version via Odin3. You can get stock ROMs from sammobile.com/firmware. You will lose your root access and you will get these system apps back what you deleted before.

I download it to my SD card and then what? excuse my newbie questions

those stock roms from sammobile youll need to flash via odin / heimdall

rotorholic said:
I download it to my SD card and then what? excuse my newbie questions
Click to expand...
Click to collapse
Firmwares from SamMobile are only flashable via Odin3 on your PC/Laptop. Move your downloaded firmware to your PC/Laptop and unzip it. Move the ...HOME.tar.md5 file to your desktop.
1. Now download Odin3 and install the drivers for your phone.
2. Open Odin3 as Admin to avoid errors or "Fail" messages while flash. (If you use Windows XP then open Odin like always) and make sure only "Auto reboot" and "F.reset" are checked.
4. Close all Samsung Kies process in task manager to avoid errors. (ignore this if you don't have Kies installed)
5. Tap on PDA/AP and choose the ...HOME.tar.md5 file (wait until Odin finish check the MD5 check sum)
6. Now on your phone. Turn off your device. Then hold volume down + home button + power button till you see a "Warning!!" screen and continue with volume up.
7. Connect your device to your PC/Laptop via USB.
8. Wait until Odin detect your device. (You will see a blue box) If your PC/Laptop install the drivers again then wait a moment.
9. If everything is OK then you can start flashing. (A flash process take up to 10 Min, so be patient)
10. Now your phone should reboot and you're done.
Don't forget you will lose ROOT access and you will get your system apps back what you deleted before.
DO IT AT YOUR OWN RISK.
For more information visit this thread : http://forum.xda-developers.com/showthread.php?t=2159660

Success!
xXPR0T0TYPEXx said:
Firmwares from SamMobile are only flashable via Odin3 on your PC/Laptop. Move your downloaded firmware to your PC/Laptop and unzip it. Move the ...HOME.tar.md5 file to your desktop.
1. Now download Odin3 and install the drivers for your phone.
2. Open Odin3 as Admin to avoid errors or "Fail" messages while flash. (If you use Windows XP then open Odin like always) and make sure only "Auto reboot" and "F.reset" are checked.
4. Close all Samsung Kies process in task manager to avoid errors. (ignore this if you don't have Kies installed)
5. Tap on PDA/AP and choose the ...HOME.tar.md5 file (wait until Odin finish check the MD5 check sum)
6. Now on your phone. Turn off your device. Then hold volume down + home button + power button till you see a "Warning!!" screen and continue with volume up.
7. Connect your device to your PC/Laptop via USB.
8. Wait until Odin detect your device. (You will see a blue box) If your PC/Laptop install the drivers again then wait a moment.
9. If everything is OK then you can start flashing. (A flash process take up to 10 Min, so be patient)
10. Now your phone should reboot and you're done.
Don't forget you will lose ROOT access and you will get your system apps back what you deleted before.
DO IT AT YOUR OWN RISK.
For more information visit this thread : http://forum.xda-developers.com/showthread.php?t=2159660
Click to expand...
Click to collapse
I was finally able to load the stock rom via Odin3 v3.09, I re-rooted my phone and removed all of the att pre-loaded junk software,
I was stuck for a few days since my pc was not finding the phone so I re-installed the Samsung drivers and it worked!
Now im hoping to find a kitkat rom to install, Thanks for all your help guys:good:

touchwiz
rotorholic said:
I'm a newbie with the rooting and custom rom installation, I've actually never done one before attempting in on my phone a SM-G730A mini S3, I have searched online and was unable to find the factory rom for this device or instructions how to install.
I was able to root my phone using king root, Then I started removing all the factory programs that ill never used. It was great until a few days ago I removed 2 programs that affected my phone operates. It now gets stuck on the at&t screen when powering on, but the funny thing is that if someone calls me, the screen pops up for me to answer.
Issues with my phone: gets stuck on at&t screen, no home screen at all, only way to access apps is through S voice.
I first started looking into the custom rom because I wanted wi-fi calling since the phone signal is low on this phone. I appreciate any help on this. Thanks
Click to expand...
Click to collapse
You probably uninstalled touchwiz. You can try installing a theme from the app store that might work.

Newbie Help
I am getting ready to do a first attempt at rooting on a Samsung S3 mini, G730A. I don't know how to get the Samsung USB driver onto the desktop because I'm not sure where it's actually located. I downloaded the Samsung Driver Zip and it's loaded on my C: drive but didn't find anything is there that seemed specific to that phone. I did locate what appears to be the generic Android device USB driver for this phone through Device Manager and put that on the desktop but not sure that is the one that I'll need when I go root. Any suggestions?
Thanks

Might have hardbricked my phone....help?

I was rooted in NCE and wanted to get 5.0. So i took it upon myself to download the rooted stock made by muniz. And now that i think about it i might have done the s5 active one.....i have and s5 and it will not boot at all now, no recovery, no download, nothing. Computer recognizes the phone as QHSUSB_BULK. Is there any possible way to fix this or am i just out of luck?

michaelatrix said:
I was rooted in NCE and wanted to get 5.0. So i took it upon myself to download the rooted stock made by muniz. And now that i think about it i might have done the s5 active one.....i have and s5 and it will not boot at all now, no recovery, no download, nothing. Computer recognizes the phone as QHSUSB_BULK. Is there any possible way to fix this or am i just out of luck?
Click to expand...
Click to collapse
As you already hardbricked your phone, you should try below process once. Even it worked for me. (It wasn't at&t)
(Do at your own risk)
Make sure that the Samsung USB Drivers are installed on your computer.
Download Samsung USB Drivers for your PC from below link.
http:// android host.org/XIVsA
(Just delete spaces)
1.Now, go to SamMobile’s website from below link.
http:// www .sam mobile.com/firmwares/
(Delete spaces)
2.Create an account.
3.Then you need to use the ‘Search’ box and type in your Galaxy S5 model number.– the model number is listed under Settings > More > About Device > Build Number.– enter the correct build number.
4.Download one of the stock Android firmware files that matches your Galaxy S5 model.
5.Extract the contents of the zip file and save the files on your PC.– there should a .tar.md5 file, don’t extract any further than that.
6.Next, download Odin 3.09 from below link.
http:// android host.org/get/PVAIv
(Delete Space)
7.Extract ODIN zip contents and save the file on your PC.
8.Make sure that the phone is switched off.– remove its battery and then re-insert it after ten seconds.
9.Boot the Galaxy S5 in Download Mode.
(Turn off the device>With the device turned off, press Volume Down, Home and Power Buttons simultaneously>Once you see the warning message, release all buttons>Press Volume Up to enter download mode>Now your device should be in download mode)
10.Launch ODIN executable on your PC.
11.Connect your phone to your PC via USB data cable. – wait for ODIN to recognize your phone, then continue to the next step.
12.Go to ODIN window and click on the AP button.
13.Load the .tar.md5 file extracted in step 5.– that is the stock Android OS file.– don’t change any other default ODIN Settings, just make sure that ‘Re-partitioning’ is disabled.
14.Now you can press the START button for the installation to begin. Wait for ODIN to complete the flashing process of a new and stock Android ROM for your Samsung Galaxy S5.
After the phone boots you should be able to enter your default Gmail account and take control over your phone once again.
Hope that this way you start up your phone.
If you found this helpful, there's a thunbsup button (thanks button), just press it

hitman-xda said:
As you already hardbricked your phone, you should try below process once. Even it worked for me. (It wasn't at&t)
(Do at your own risk)
Make sure that the Samsung USB Drivers are installed on your computer.
Download Samsung USB Drivers for your PC from below link.
http:// android host.org/XIVsA
(Just delete spaces)
1.Now, go to SamMobile’s website from below link.
http:// www .sam mobile.com/firmwares/
(Delete spaces)
2.Create an account.
3.Then you need to use the ‘Search’ box and type in your Galaxy S5 model number.– the model number is listed under Settings > More > About Device > Build Number.– enter the correct build number.
4.Download one of the stock Android firmware files that matches your Galaxy S5 model.
5.Extract the contents of the zip file and save the files on your PC.– there should a .tar.md5 file, don’t extract any further than that.
6.Next, download Odin 3.09 from below link.
http:// android host.org/get/PVAIv
(Delete Space)
7.Extract ODIN zip contents and save the file on your PC.
8.Make sure that the phone is switched off.– remove its battery and then re-insert it after ten seconds.
9.Boot the Galaxy S5 in Download Mode.
(Turn off the device>With the device turned off, press Volume Down, Home and Power Buttons simultaneously>Once you see the warning message, release all buttons>Press Volume Up to enter download mode>Now your device should be in download mode)
10.Launch ODIN executable on your PC.
11.Connect your phone to your PC via USB data cable. – wait for ODIN to recognize your phone, then continue to the next step.
12.Go to ODIN window and click on the AP button.
13.Load the .tar.md5 file extracted in step 5.– that is the stock Android OS file.– don’t change any other default ODIN Settings, just make sure that ‘Re-partitioning’ is disabled.
14.Now you can press the START button for the installation to begin. Wait for ODIN to complete the flashing process of a new and stock Android ROM for your Samsung Galaxy S5.
After the phone boots you should be able to enter your default Gmail account and take control over your phone once again.
Hope that this way you start up your phone.
If you found this helpful, there's a thunbsup button (thanks button), just press it
Click to expand...
Click to collapse
Thanks for the reply. The phone will not boot at all, even download mode.

Ok. So i'm trying to follow these directions with my s5 and have not had any luck. Im using this post for the unbrick file. I get past the part where it writes to the sd card but when it comes to the fdisk part im confused on which trigger to use cause the -1 does nothing on macosx. If anybody has had any luck trying this could they please help.

michaelatrix said:
Ok. So i'm trying to follow these directions with my s5 and have not had any luck. Im using this post for the unbrick file. I get past the part where it writes to the sd card but when it comes to the fdisk part im confused on which trigger to use cause the -1 does nothing on macosx. If anybody has had any luck trying this could they please help.
Click to expand...
Click to collapse
would a usb jig get me into download mode? or am i just screwed? and aslo can someone one NCE follow these and give me the .img file for NCE?

An update if anyone is wondering. I have got it to boot from sd and have flashed 2 different stock files and the only way to boot is to have the sd card in. Still trying to find out how to boot without....

If you can get it to boot just use the downgrade to nce Odin file and start over

superp32 said:
If you can get it to boot just use the downgrade to nce Odin file and start over
Click to expand...
Click to collapse
I have used the downgrade to NCE odin file but it still doesnt boot unless the sd card is in the phone.

michaelatrix said:
I have used the downgrade to NCE odin file but it still doesnt boot unless the sd card is in the phone.
Click to expand...
Click to collapse
What happens if you put it in download mode, then pull the SD card. If you can do that then try the NCE firmware if it'll let you and see what happens. It's worth a try

superp32 said:
If you can get it to boot just use the downgrade to nce Odin file and start over
Click to expand...
Click to collapse
dirtydodge said:
What happens if you put it in download mode, then pull the SD card. If you can do that then try the NCE firmware if it'll let you and see what happens. It's worth a try
Click to expand...
Click to collapse
Thanks. But ive tried. It's really weird I can't think of a reason why is wont boot without having the sd card in.

Fixed

michaelatrix said:
Fixed
Click to expand...
Click to collapse
How was you able to get it fixed. Might help others out if you post your steps.

root A9 A9000ZHU1BQE1 hong kong with TWRP and supersu

hello
i search whole xda and many chinese site for rooting A9 A9000ZHU1BQE1 but there is nothing. becuase this model just release in afew country and no body work on it worldwide
but i finally find a way for rooting. (after searching alot chinese!! site)
first of all cf auto root doesnt work on this firmware.dont work on it, i see some site root with cf auto root on A9000ZCUxxxxx model but not work on A9000ZHUxxxxx (ZHU is hong kong firmwire and ZCU is open china firmwire)
IMPORTANT:
you should do several work before start the rooting.dont worry its easy
1. enable usb debugging (its easy search in google)
2. enable OEM unlock (its easy too.search in google)
3. install CROM service.apk . its for unlocking bootloader. (i install this from galaxy app in phone,just like other app.then go to CROM and unlock bootloader automaticly.its samsung company app and safe.)
you need just 3 thing (i attach them to post)
1. twrp for A9000 (15mb)
2. supersu( i use 2.82 version. put supersu file in phone memory or memory card )
3. odin soft (recommended version 3.10.6)(its a soft for pc,sry i said all things that amator members dont confuse )
after doing important thing that i said above ....
HERE IS METHOD
1:
go your phone to downloading mode. (just turn off phone and then press volume down + home + power button. if you couldnt search in google.its easy
2:
A: open odin in pc with administrator. (right click on odin and click on RUN AS ADMINISTRATOR)
B: connect phone to pc ,when you connect phone odin said "added" with blue color
now click on AP in odin and select TWRP file i attach to post.dont change other option in odin.)
c: now click on start in odin.(if odin freeze and said "not responding" dont worry just wait a few minute and dont close odin!!!)
d: after odin finish its job. odin said "pass" with green color .now phone restarting automaticly)
3:
now you should go to twrp recovery.( after phone come up,again turn off phone.and go to "recovery mode" .just turn off phone and press volume up + home + power button). if the language is chinese,change it to english(easy just press right button in first screen of twrp.or search in google).now you should install supersu with twrp .for that press install on twrp and find supersu file you put in phone memory ... .after installing press reboot.(dont need wipe cache) .
4:
after phone come up android, check supersu icon must come to your phone app.if it doesnt appear ,install it from google play .and then install "root checker" app in your phone from google play, and check for root.
finish. its done. your phone root. the whole method take 1 5 minutes
if other firmwire of A9 A9000 ,for example A9000ZCUxxxxx do this method with twrp file that i attach .if its work or not plz say in post that other one know.

Hello Sir, I think I have the same Tablet, Baiduzhe A9000, with MT6797 Android 8.0. The recovery is not working, and the manufacturer is not providing the ROM file. Will this above method work for me? Please help me

I just confirmed that my device is the same MT 6582. Sir, kindly tell me how to flash or root. My device is corrupted.

Rooting made easy
Download Kingo root app, no need to use PC, it worked on my similar tablet (tab910, mediatek, mt6797)
Google kingoapp
Now I just need to find the ROMs (android versions higher than 4.4 which is compatible with my device)
P.s. if it doesn't work, try installing the PC version & follow steps from the website