[ROM] OFFICIAL CM12.1 KFire HD 8.9 (LP 5.1.x) [2015-06-24 ALPHA] - 8.9" Kindle Fire HD Android Development

OFFICIAL CyanogenMod 12.1 for the Kindle Fire HD 8.9"
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
BEFORE YOU FLASH THIS, PLEASE MAKE SURE THAT YOU HAVE A 2ND-BOOTLOADER INSTALLED FROM HERE:
http://forum.xda-developers.com/showthread.php?t=2128175
CHECK KNOWN ISSUES BEFORE FLASHING. PROBABLY NOT GOOD ENOUGH FOR DAILY USE.
Official nightly builds can be found here:
http://download.cyanogenmod.org/?device=jem
Download Google Apps for Android 5.1:
https://www.androidfilehost.com/?w=files&flid=25361
(Choose newest *-5.1-* file)
NOTES:
Older versions of TWRP will show a "mount failed error". This is safe to ignore. TWRP 2.8.7.0 and on is recommended for cm-12.1 / android-5.1.
First boot after a clean wipe will take a LONG time. Be patient.
KNOWN ISSUES:
Use XDA Bug Reporter
SCREEN SHOTS:
Use XDA Screenshots
XDA:DevDB Information
CM12.1 KFire HD 8.9 (LP 5.1.x), ROM for the Amazon 7" Kindle Fire HD
Contributors
Hashcode
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Alpha
Beta Release Date: 2015-06-24
Created 2015-01-02
Last Updated 2015-06-24

Reserved
KERNEL UPDATES for Lollipop Android 5.0 / 5.1
Added F2FS support which can be turned on (with a full /data format) in a future release of TWRP
Combined defconfig setup to better support all HD models
Picked "Wakeup reason" patchset from Google's common 3.4 kernel (not fully implemented yet)
Picked IPV6 routing changes from Google's common 3.4 kernel
Reverted a hardcoded disable of Secure Discard and added the official upstream patch for Secure Discard support detection

Reserved
Android 5.1 / CM-12.1 changes:
SElinux Enforcing as default enabled

Holy smokes! Was hoping this would be out soon after seeing it released for the 7 inch! Thank
You hashcode for all your hours and hard work that allows us to have a better experience with the kindle! This is awesome and can't wait to try!
Mike
update: did wipe, installed cm12 clean with no errors, installed gapps clean with no errors! this maybe normal but progress bar in TWRP did not move after "swipe to install" until file 3 of 3 gapps was installing and it was almost complete (had my heart beating a little faster than normal) : ) but then all was good! first boot took about 6 to 7 minutes i would say (meant to time it but forgot) have went through all settings and all seems good, wireless good, all gapps seem good, not a single bug/glitch/crash SO FAR! thanks a million Hashcode! continuing to test out everything right now but all seems good!
Mike

OK I noticed one major thing....I lost root. Why did that happen? I did not lose root after I flashed cm11. Is this because its alpha unofficial release? Thanks in advance for any input!
Mike

Pretty dang good for a first build. I think a new TWRP and f2fs is going to bring the life back to this device. Its been pretty laggy ever sense the Kit Kat builds. I don't remember Jelly Bean being this slow. Maybe I'm just used to faster devices now, but I've always adored my Amazon Jem. Only thing I've seen thus far is Chrome Browser crashes after a minute or two, a bit laggy overall, a battery whore, and Google Launcher flat out doesn't work. Could be the gapps package though. Awesome work so far my friend, real treat. Thanks Hash'
---------- Post added at 08:42 AM ---------- Previous post was at 08:39 AM ----------
11fan said:
OK I noticed one major thing....I lost root. Why did that happen? I did not lose root after I flashed cm11. Is this because its alpha unofficial release? Thanks in advance for any input!
Mike
Click to expand...
Click to collapse
Just flash a SuperSU zip and root is back. I think it's a CM issue because I lost root on other CM12 devices as well recently.

Thank you!!.Rom is fantastic..Gap link is a waste some kinda malware...
Here are a couple links while they last.
https://app.box.com/s/80q8qu7l9akgb04u828j
https://www.dropbox.com/s/lwbf3laae901mgo/gapps-lp-20141122-signed.zip?dl=0

There was two download tabs in the gapps link. Top one was junk as you described, I grabbed that one first also. But the bottom download tab was correct gapps for LP with matching md5.
Mike
---------- Post added at 08:04 AM ---------- Previous post was at 07:53 AM ----------
zavien3 said:
Pretty dang good for a first build. I think a new TWRP and f2fs is going to bring the life back to this device. Its been pretty laggy ever sense the Kit Kat builds. I don't remember Jelly Bean being this slow. Maybe I'm just used to faster devices now, but I've always adored my Amazon Jem. Only thing I've seen thus far is Chrome Browser crashes after a minute or two, a bit laggy overall, a battery whore, and Google Launcher flat out doesn't work. Could be the gapps package though. Awesome work so far my friend, real treat. Thanks Hash'
---------- Post added at 08:42 AM ---------- Previous post was at 08:39 AM ----------
Just flash a SuperSU zip and root is back. I think it's a CM issue because I lost root on other CM12 devices as well recently.
Click to expand...
Click to collapse
Flash a zip as in with adb install or just doing regular apk install will work? Thanks
Mike

I installed cm12 and gapps clean with no errors, no problems so far. No root when tried to install apps with root access...the solution was easy: in Configuration, Developer Options, Root Access tab.
Thanks Hashcode!

zavien3 said:
Pretty dang good for a first build. I think a new TWRP and f2fs is going to bring the life back to this device. Its been pretty laggy ever sense the Kit Kat builds. I don't remember Jelly Bean being this slow. Maybe I'm just used to faster devices now, but I've always adored my Amazon Jem. Only thing I've seen thus far is Chrome Browser crashes after a minute or two, a bit laggy overall, a battery whore, and Google Launcher flat out doesn't work. Could be the gapps package though. Awesome work so far my friend, real treat. Thanks Hash'
Try using PA GAPPS located at http://forum.xda-developers.com/showthread.php?p=56832776. Both Chrome Browser and Google Now Launcher work. I flashed the Full Modular package (clean flash with the ROM).
@Hashcode another great job - can't thank you enough.
Sent from my Amazon Jem using XDA Free mobile app
Click to expand...
Click to collapse

jaramosparra said:
I installed cm12 and gapps clean with no errors, no problems so far. No root when tried to install apps with root access...the solution was easy: in Configuration, Developer Options, Root Access tab.
Thanks Hashcode!
Click to expand...
Click to collapse
@jaramosparra thanks for the reminder! have been so excited about trying this out i did not even think about enabling those options.!
Mike

Root Works Fine
Root is now enabled through developer options.

Been running this since release and I have to say that it is functioning remarkably well. Almost a DD.

Does anyone know if Philz Touch 6.48 (the latest) has F2FS support?

think you for you working!

Didn't think that I would have Lollipop on my old KFHD before my HTC One M8!!
I have been running this for 3 or 4 days and all seems to be running great for me. I have found with the previous KitKat builds that it would only start to slow down if I installed too many apps. So far I just installed what I need (I just generally use it to browse the internet, read news and run any apps that cast to my chromecast) and it is certainly not any slower than Kitkat. One thing I did do a bit different was to install the "Micro Modular Package" from the PA Gapps Package in the link that BobJayJr posted (http://forum.xda-developers.com/showthread.php?p=56832776) to keep as much space available as I could.
Thanks very much for your time and effort Hashcode. Has kept my old Tablet going so much longer than I expected when I bought it

Been running for 2 days without issue. Is there any plans for an LTE version for working Bluetooth ?

Quick question: Has anybody done a backup from TWRP of the DATA partition and restored it after installing CM12 + Gapps?
I've done it, and it's been stuck on the CM boot logo for 5-10 minutes.
I've tried without restoring data and although it was a long boot but it did eventually boot. Any suggestions?
UPDATE: It booted so just ignore me

It was a little too slow with restoring the DATA partition so I just started from scratch - anyway so far so good. ROM is wicked. Thanks for the work

Hashcode said:
UNOFFICIAL CyanogenMod 12.0 for the Kindle Fire HD 8.9"
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
CHECK KNOWN ISSUES BEFORE FLASHING. PROBABLY NOT GOOD ENOUGH FOR DAILY USE.
Download Google Apps for Android 5.0:
http://d-h.st/users/dhacker29/?fld_id=27426#files
(Choose newest gapps-lp-* file and use the "Download Now" button)
NOTES:
You may see a "mount failed error" in TWRP when flashing the build. This is safe to ignore.
First boot after a clean wipe will take a LONG time. Be patient.
Unofficial builds can be found here:
Use XDA Downloads
CHANGES (always includes CM changes):
[01/02] 1st public release
KNOWN ISSUES:
Use XDA Bug Reporter
SCREEN SHOTS:
Use XDA Screenshots
XDA:DevDB Information
CM12.0 KFire HD 8.9 (LP 5.0.x), ROM for the Amazon 7" Kindle Fire HD
Contributors
Hashcode
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Alpha
Beta Release Date: 2015-01-02
Created 2015-01-02
Last Updated 2015-01-04
Click to expand...
Click to collapse
Would it be safe to perform a dirty flash from CM11, or would I need to do a clean wipe?

Related

[ROM-AOSP] Unofficial CM10.2 (JB 4.3.1) [11/15 CM REFRESH]

Unofficial CyanogenMod 10.2 for the Kindle Fire HD 8.9
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
BEFORE YOU BEGIN MAKE SURE YOU HAVE A 2ND-BOOTLOADER INSTALLED CORRECTLY AND CAN SEE THE BLUE LOGO DURING BOOTUP:
http://forum.xda-developers.com/showthread.php?t=2128175
In this build I do not have the HBOGO or Voice Plus patches yet.
Don't use the user swapping feature yet. It's very buggy. If you do happen to create a new user and swap, to fix the crazyness that happens, just delete the new user and reboot.
Download Information:
[LATEST][11/15 BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: Download (Goo.im)
Mirror 2: Download (Crackflasher)
md5sum: 47c385ac0852997c0f1c84bda24b16cf
[08/12] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jem/cm10.2/cm-10.2-20130812-UNOFFICIAL-jem.zip
md5sum: 76d7b3943dc6a160a27df625d689a279
[07/31] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jem/cm10.2/cm-10.2-20130731-UNOFFICIAL-jem.zip
md5sum: 04ebae58e0eb2b74732adc3844e6ee84
Older builds can be found in the same folder on goo.im:
http://goo.im/devs/Hashcode/jem/cm10.2/
Download Google Apps:
http://goo.im/devs/Hashcode/gapps
(For Android 4.3)
PLEASE BE SURE TO WIPE SYSTEM & DATA/CACHE (FACTORY RESET) WHEN COMING FROM AMAZON STOCK SOFTWARE.
(It's the "Wipe" button and then "System" and then "Factory Reset" button in TWRP -- this does NOT clear your sdcard space)
Be aware that the "sdcard" space has changed slightly from ICS to JB4.2. You will find your stock amazon OS files in /data/media/ or "sdcard" on the Stock OS. But CM10.1 will create a sub directory "/data/media/0" and call that "sdcard". And in TWRP it will also use "data/media/0" as "sdcard". This has to do with multi-user settings. So when placing files on the "sdcard" be sure to check both locations before wondering why that file is missing.
CHANGES:
[11/15] SElinux now included in the kernel and set to permissive. I don't recommend turning it to enforcing as I'm still debugging the "deny" messages.
[08/12] Includes a Trebuchet patch to fix the screen flip-flop when trying to drag an icon in landscape (by XDA user Wickets^)
[08/12] All new "from source" sensor driver
[08/12] Temp. disable light sensor (due to recode of sensor driver)
[07/31] First CM10.2 build
FEATURES:
3.0.50 kernel (up from a stock 3.0.21 kernel). This includes updates from Texas Instruments, Google and Kernel.org.
PowerVR Graphics Drivers: DDK [email protected] for Android (Jellybean compatible)
Updated bltsville libs to 2.2.2.0 (this is partial screen update code which enables smoother / faster screen draws)
Audio
Camera
Wifi
Bluetooth
Sensors
HWAcceleration
HD Codecs for YouTubeHD and Netflix
HDMI video out is now correct and work across several resolutions. YMMV
DEVS
BUILDING THIS ROM:
First, read through Google's Android website about "how to setup a build environment":
http://source.android.com/source/initializing.html
[ COMING SOON ]
SCREEN SHOTS:
CURRENT KNOWN ISSUES:
When long pressing icons in landscape mode to move them, etc the screen will flip upside down for a moment and right itself. This causes the action to be aborted.
Rotation selection in games is hit and miss. Some work perfectly and some like to flip the device upside down. Still debugging what is causing this.
AUDIO: Any decoder which uses Dolby surround current has a lower volume than the rest of the system (Netflix, Google Movies, etc). It's a WIP.
Sensors: Testing various sensors, gyro seems 90 degrees off, etc.
I don't have an LTE version so this is not enabled in current builds.
Are you going to keep on developing both this and the 4.2.2 ROM? Or should we switch to this ROM for the newest updates in the future?
By the way, thanks very much for all the effort you are putting in developing for and improving our devices. We all really appreciate it.
narse said:
Are you going to keep on developing both this and the 4.2.2 ROM? Or should we switch to this ROM for the newest updates in the future?
By the way, thanks very much for all the effort you are putting in developing for and improving our devices. We all really appreciate it.
Click to expand...
Click to collapse
I will probably continue with the 4.2.2 builds until I feel like this has fully caught up with them.
Some apps for instance are not compatible w/ 4.3 yet (one of the movie players).
Omg. That is all. =)
Sent from my One X using Tapatalk 4 Beta
Hashcode said:
I will probably continue with the 4.2.2 builds until I feel like this has fully caught up with them.
Some apps for instance are not compatible w/ 4.3 yet (one of the movie players).
Click to expand...
Click to collapse
Yes that is MX player not working in 4.3.
timnan said:
Yes that is MX player not working in 4.3.
Click to expand...
Click to collapse
MX player was updated yesterday.
Still not working?
Thanks Hashcode! You're than man.
BTW, if you need someone to test functionality on an LTE device, let me know. :good:
stevenmirabito said:
Thanks Hashcode! You're than man.
BTW, if you need someone to test functionality on an LTE device, let me know. :good:
Click to expand...
Click to collapse
Same here.
I am thinking about building the rom with LTE (hash says the code is all there) from the source. But I haven't used Linux from 2010 and have to setup the gear for doing this...em...
I also would like to get 4g LTE working. If you could dust off linux and put your skills to work, I am sure many will appreciate your efforts!
I am working on an experimental built for LTE users.
As soon as I get a ROM built, I'll post it up. There is a 100% chance that it's going to take quite a few tries to get it working. So not for the easily irritated.
Sent from my XT926 using Tapatalk 2
Hashcode said:
I am working on an experimental built for LTE users.
As soon as I get a ROM built, I'll post it up. There is a 100% chance that it's going to take quite a few tries to get it working. So not for the easily irritated.
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
Irritated? With you? With a ROM that didn't even have the feature previously? You underestimate us.
Hashcode said:
I am working on an experimental built for LTE users.
As soon as I get a ROM built, I'll post it up. There is a 100% chance that it's going to take quite a few tries to get it working. So not for the easily irritated.
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot, Hashcode! I'll be patient...
Just tried this Rom. Wiped system, dalvik and cache before. The aosp keyboard crashes as soon as the laucher is opened. Because oft this i cant type. Is this a known bug? Shall i test sth. For you @Hashcode?
Sent from my Incredible S S710e using xda app-developers app
Thanks for this ROM. It is faster than previous version with 4.2.2.
Still some issues (audio in players), but very usable for daily usage.
Thanks!
badbutz said:
Just tried this Rom. Wiped system, dalvik and cache before. The aosp keyboard crashes as soon as the laucher is opened. Because oft this i cant type. Is this a known bug? Shall i test sth. For you @Hashcode?
Sent from my Incredible S S710e using xda app-developers app
Click to expand...
Click to collapse
Double check you're flashing the right GApps.
There seems to be an issue with the 'sdcard' link under Root - It is currently pointing at /data/media/legacy instead of /data/media/0 - This is causing some issues with apps that default to 'sdcard' including TitaniumBackup. Also, there is a 'Storage' under Root that points somewhere, which is causing issues with apps that default to '/storage' for their backup.
Status of this rom on my Kindle:
- as mentioned in changelog games are slower then on 10.1
- on 10.1 and 10.2 there are ocassions the screen rotation bug is still occuring. It happens within some games and after rotating in mx player.
Thanks and keep up your excellent work.
hi,
i'm new with Kindle Fire HD. tried this rom too and i think its very good :fingers-crossed:
gapps failure
Interesting issue going on here. i upgraded to this build (10.2-20130731-UNOFFICIAL-jem, and the latest Gapps to go with it. Note that i did not do a complete wipe, as i wanted the installed apps to remain. Upon reboot, i have a notification from pretty much every app i have installed on the device that "update for "(application name) could not be downloaded due to an error. (error retrieving information from server.[RPC:S-5:AEC-0]) i ge the same error if i try to download anything from the play store also. any thoughts?
Edit: restored back to previous backup, allowed all updates to take place first, then redownloaded the rom and gapps. A quick reflash using goo manager and everything seems to be working now. @Hashcode - another fantastic rom. only issue i still have the the screen rotation when long pressing icons in landscape mode. a very small price to pay for all the awesomeness.

[ROM] SlimKat Official MSM8960 Unified [4.4.4][6/30/2014]

SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms, ROM for the Motorola Droid RAZR HD
Contributors
darkspadez, SlimRoms
Version Information
Status: Testing
Created 2014-07-01
Last Updated 2014-07-01
Reserved For Future use
Also Reserved
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Awesome awesome!! Been waiting in anticipation for this will try as soon as possible!
EDIT: Ok, I have only had limited time to test. But briefly put things looks promising here:
Installed without any problems (using latest TWRP in my case).The same bugs that exist in CM 11 are also present here, which is it to be expected (e.g. broken video playback). This is perfectly natural for such an early release and no doubt these will get sorted out as development progress. I am glad to try out this early build. For an alpha it seems very stable and definitely looks promising! I initially tried the official Slim Gapps (as linked to). They seemed fine. Since then I have installed ART compatible Gapps from the CM thread (13/11 i believe). Now running in ART runtime mode. Yes this does introduce some problems and not all apps are compatible, however from my experience ART also introduce a previously unseen level of smoothness. Will continue to use this the next days and of cause eagerly follow development.
@darkspadez (and all other other involved devs of cause): Congrazt on this first public SlimKat build for our phones!
Sent from my XT925 using Tapatalk
SVLAN said:
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Click to expand...
Click to collapse
925 is GSM.
help
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I am using latest twrp recovery found here in the RAZR development forum. I can't say if this the best option though. I can only say that in my case it worked fine (install, backup and restore).
I'm one of the devices running the buggy EMMC.
Error is the same as all the others (I wish there were a kernel fix for it):
set_metadata_recursive: some changes failed
Back to the drawing board...
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
projekt8e said:
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
Click to expand...
Click to collapse
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
DizzyFox said:
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
Click to expand...
Click to collapse
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
I was expecting to read about the ROM, but only see comments about recoveries. Any comments on the ROM? Video recording/playback is working?
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
SVLAN said:
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
Click to expand...
Click to collapse
What kind of video playback works for you? YouTube? MX Player with S/W decoding?
So far yt and netflix
SVLAN said:
So far yt and netflix
Click to expand...
Click to collapse
Wonder when this was commited to compile. I see a bunch of changes related to this in the gerrit and wonder if CM11 will be getting this tonight as well.
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
SVLAN said:
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
Click to expand...
Click to collapse
Do you have any print services in Settings?
Spidinator said:
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
I must not have my PC set right. I get my phone in fastboot but when I try to open fastboot it just blinks and disappears. I may just have to try putting trwp on my phone. Thanks you are all a great bunch of gentlemen

[ROM][Lollipop 5.0.2] UnOfficial Beanstalk 5.0025 for Otter2

*** UnOfficial Beanstalk 5.0 for the Otter2 ***
***Warning***
I am not responsible for the things you choose to do to your device
You are ultimately responsible for what happens with your device
By flashing this you have already voided and sort of warranty for your device
And I am not responsible for bricked devices
There is always a small amount of risk in what we do here...
So please do research and ask questions before things go bad
I will do my best to answer questions
***End of warning***
Please thank scott.hart.bti who is the creator of Beanstalk ROM and the Cyanogenmod Team whose work is the base of this ROM!
**About
Beanstalk is a CM based ROM with a few minor tweaks here and there to make a pretty smooth android experience.
**Install
WIPE (data, cache, and Dalvik)...you aint coming from CM12 so this will have to be a fresh and clean install
Install ROM...download available here
Install GAPPS if you so choose...available here or what ever variation you so choose
OPTIONAL install SuperSU...available here. (there is a slight bug where it may not install on its own)
OPTIONAL wipe chaches before reboot
Reboot
Enjoy!
**Download
Jan 31, 2015 here
**Change Log
Jan 31, 2015 - Initial build
**Known Issues
SuperSU is supposed to install after the ROM installs by default...for the KF2 it seems a little buggy. If thats the case you can flash after 1st boot.
Overall the system seems a little choppy not super smooth yet.
I'll get some screen shots up sometime...so there is none at the moment.
Lollipop at LAST!
Omg you're amazing
Sent from my VS985 4G using Tapatalk
jamminjon82 said:
Omg you're amazing
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Okay maybe I was little early on its release...I'm starting to get a lot of force closes
You're still awesome
Your into says: "Please thank scott.hart.bti who is the creator of Beanstalk ROM and the Cyanogenmod Team whose work is the base of this ROM!" First, thank you scott.hart.bte and Cyanogenmod Team for all of your work, as well as you Obsolete1. Question: I have a STOCK KF2d Gen. I assume I will need to root first, then set up twrp, 2nd bootloader and other files as though I'm loading Otter2's android 4.4.4? I also assume I pick up with your Lolipop rom, gapps and SU at the same point in the process where I would be installing CM11.0 + 3.0.50 Kernel for Kindle Fire 2 and the gapps for it? Are my assumptions correct? Thank you again for your work on this project.
First root access then use fastboot to flash boot.img recovery 2nd bootloader then you upgrade twrp to 2.6.3.1 then you can flash this rom just don't flash anything from cm 11
Works for me. Thanks for the additional info because I would have missed the twrp upgrade to 2.6.3.1.
meXico12 said:
Works for me. Thanks for the additional info because I would have missed the twrp upgrade to 2.6.3.1.
Click to expand...
Click to collapse
Are there any plans to update this "unofficial" version? I'd like to try nightlys and ultimately the "official" version. Thanks.
Ikr its like he gave up or he is secretly working on it
I'm interested in this too, would love to see some screenshots. If this becomes reasonably stable I will def give it a try.
---------- Post added at 11:14 PM ---------- Previous post was at 11:03 PM ----------
Kusakus said:
First root access then use fastboot to flash boot.img recovery 2nd bootloader then you upgrade twrp to 2.6.3.1 then you can flash this rom just don't flash anything from cm 11
Click to expand...
Click to collapse
What do you mean by don't flash anything from cm 11??
Steve.
meXico12 said:
Are there any plans to update this "unofficial" version? I'd like to try nightlys and ultimately the "official" version. Thanks.
Click to expand...
Click to collapse
es updates will be available soon see below. No to the making things official sorry.
Kusakus said:
Ikr its like he gave up or he is secretly working on it
Click to expand...
Click to collapse
Yes and no....busy home life at the moment plus I'm in to process of chaning distros so things are kind of a mess. This is my "other" project that does not get as much attention. My phone which runs the same thing gets more attention because I use it everyday unlike my KF. Give me a couple more days and I should have another build.
Again sorry for not responding, I didnt get any notifications that there where posts here I assumed most people had moved on so it went to way "back-burner" on the things to do. But now that I see some interest I will try to make it a little more important. Thanks again for the interest. :good:
obsolete1 said:
es updates will be available soon see below. No to the making things official sorry.
Yes and no....busy home life at the moment plus I'm in to process of chaning distros so things are kind of a mess. This is my "other" project that does not get as much attention. My phone which runs the same thing gets more attention because I use it everyday unlike my KF. Give me a couple more days and I should have another build.
Again sorry for not responding, I didnt get any notifications that there where posts here I assumed most people had moved on so it went to way "back-burner" on the things to do. But now that I see some interest I will try to make it a little more important. Thanks again for the interest. :good:
Click to expand...
Click to collapse
Thanks a lot for this, will definitely take a look when I have some free time... :good:
Great work man. My SuperSU is not opening up and after it freezes the whole system starts to force close, I already reinstalled it using TWRP but no luck, I updated to the latest version using an apk I downloaded but it still won't open up and.
Can you help me root it?
Also very excited about lollipop for KF2! Let me know if I can test anything.
Sent from my XT1068/69 using Tapatalk
Same here, recently got one for free and would love to test for you.
help
I am currently running Cyanogenmod 11-20150209 Nightly Otter2
I do not understand what you mean by don't flash coming from CM11.
Can you please help me? I would love to get this new OS on my device
jonathanml86 said:
I am currently running Cyanogenmod 11-20150209 Nightly Otter2
I do not understand what you mean by don't flash coming from CM11.
Can you please help me? I would love to get this new OS on my device
Click to expand...
Click to collapse
He meant, start the Kindle in fastboot mode to flash boot.img from the command prompt.
theplagueisback said:
He meant, start the Kindle in fastboot mode to flash boot.img from the command prompt.
Click to expand...
Click to collapse
I have TWRP on there, can't I just download the rom, reboot into twrp, wipe properly and install?
jonathanml86 said:
I have TWRP on there, can't I just download the rom, reboot into twrp, wipe properly and install?
Click to expand...
Click to collapse
Yes if you have the minimum required version to install Lollipop. Because you already have CM installed it means you already have performed all the necessary bootstrap tricks.

[ROM][Wifi][September 25]Omni 5.1.1

Summarized Standard Disclaimer: use at your own risk. I use it at mine
*Full wipe recommended if coming from another rom or Omni 5.0.2*
My personal Omni Rom 5.1 is based on omnirom with the following additions from CM11/12:
CM12 File Manager
CM11 Calculator (uglier but much more functional)
Bash shell
Nano text editor
CM12 discontinued Koush derived superuser
CM11 Forward ported custom host name
CM12 volume long press music track control
CM12 ad hoc wifi detection
CM12 camera power button shutter control
CM12 openssh command line utilities
CM12 custom quick settings
CM12 trebuchet launcher
The list of personal touches isn't very long right now but they include
Battery icon changes color based on percent: 0-15 red, 16-50 yellow, 51-100 green
Jelly bean style toasts
Android 4.x nav bar icons
Disabled SELinux at the kernel
Up to 1.6GHz CPU OC
Automatic 400MHz GPU OC
Not Working/Quirky
Bluetooth audio?? (can't test myself)
Stock camera randomly freezes. Just open it again
AOSP keyboard swipe doesn't work: google's fault.
Can't hear phone calls.
Flashing SuperSU might cause issues since the su daemon is started by the ram disk script since boot scripts apparently don't work.
Plugging in a charger when turned off causes the tablet to get stuck at animation loading
Everything else not listed as a quirk probably works.
*First Time or Coming from Omni 5.0.2*
-Read second post FAQ and other important information
-Make titanium backup (highly recommended)
-Flash TWRP 2.8.1.0
-Reboot into new recovery
-Make recovery backup (meh, I don't usually do it but you have been warned)
-Full wipe
-Format system
-Install rom
-install gapps (you can use another one if you want. I always provide the most minimum gapps)
-reboot
-install adblocker
*Subsequent flashes*
-Install ROM
-Install gapps
-Reboot into rom
-Reapply any adblocking hosts file.
Downloads
Gapps Android File Host (same one as omni 5.0)
TWRP Android File Host
Wifi ROM Android FIle Host
3G ROM Android FIle Host
Credits:
-decatf: your patches were vital to the rom
-drewwalton19216801: used your gapps for the minimal gapps package
-kasper_h: I learned a lot from doing kitkat with you last year
-pershoot: original device/vendor base
-omni team: providing rom
-cyanogenmod team: rom extras
Sources https://github.com/AAccount?tab=repositories
Screenshots to follow later
XDA:DevDB Information
[ROM][Wifi+3G][March 22]Omni 5.1, ROM for the Samsung Galaxy Tab 10.1
Contributors
AAccount
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: Omni, Cyanogenmod
Version Information
Status: Stable
Created 2015-03-22
Last Updated 2015-03-22
Reserved
Reserved #2
No more p4tmo?
Sweet!
Just one thing... am I blind or you just forgot the download link for the ROM?
They're under the Downloads section.
this ROM seems nice and fast! Breathes new life to the grab. Can anybody point me to a different gapps pack? (Not so slim) I have tried out downloading several but was not able to flash any of the the .zips in twrp.
rtiangha said:
No more p4tmo?
Click to expand...
Click to collapse
I'm waiting to hear back on if the 3G works. If it does then I'll to TMobile.
----------------------------------Added-----------------------------------------------
New weekly is up.
Very fast, much faster than 4.4.4, but 3g and keyboard not working...
VyKril said:
Very fast, much faster than 4.4.4, but 3g and keyboard not working...
Click to expand...
Click to collapse
Keyboard is easily fixable by just flipping some switches in the settings.
Major problems
Hi!
I'm new with flashing Samsung devices but i have flashed other and i thought this can not be so hard..
But now i need your help!
I wipe the whole thing nothing left, i can get in to recovery and i can load zip-files to the tab, but it says i have a P4wifi and I don't. What have I done wrong and is there anything I can do to fix this and flash Omni 5.1 for 3G tab?
I downloaded the omni-5.1-20150330-p4-HOMEMADE so I must have done something before this, maybe when i rooted the tab?
If u don't understand my english writing feel free to ask so maybe I can explain myself.
[evol] said:
Hi!
I'm new with flashing Samsung devices but i have flashed other and i thought this can not be so hard..
But now i need your help!
I wipe the whole thing nothing left, i can get in to recovery and i can load zip-files to the tab, but it says i have a P4wifi and I don't. What have I done wrong and is there anything I can do to fix this and flash Omni 5.1 for 3G tab?
I downloaded the omni-5.1-20150330-p4-HOMEMADE so I must have done something before this, maybe when i rooted the tab?
If u don't understand my english writing feel free to ask so maybe I can explain myself.
Click to expand...
Click to collapse
Perhaps you flashed the wrong recovery? Try flashing the correct one and see what happens.
Sent from my p4wifi using XDA Free mobile app
Olivier V said:
Perhaps you flashed the wrong recovery? Try flashing the correct one and see what happens.
Sent from my p4wifi using XDA Free mobile app
Click to expand...
Click to collapse
Found a old recovery file from 2012, flashed that with Odin, manage to install the rom, but not the gapps.
"Android is processing" so something is happening. I will just wait and see.
Maybe I did?
There are so many files circulation out there so I´m getting confused.
Maybe you can point me in the right direction?
I downloaded the wifi rom, but no luck with that.
[evol] said:
Maybe I did?
There are so many files circulation out there so I´m getting confused.
Maybe you can point me in the right direction?
I downloaded the wifi rom, but no luck with that.
Click to expand...
Click to collapse
First of all you need the 3G rom not the WiFi rom.
Download the recovery for your 3G tab from this post, flash it and see what happens.
http://forum.xda-developers.com/sho...ROM][Unofficial][AOSP] Android 5.1.0 Lollipop
Sent from my p4wifi using XDA Free mobile app
Olivier V said:
First of all you need the 3G rom not the WiFi rom.
Download the recovery for your 3G tab from this post, flash it and see what happens.
http://forum.xda-developers.com/sho...ROM][Unofficial][AOSP] Android 5.1.0 Lollipop
Sent from my p4wifi using XDA Free mobile app
Click to expand...
Click to collapse
Hi thanks for your help!
I did an edit in my earlier post, and now i manage to install the 3G rom.
So I got my Tab up and running.
But I appreciate your help very much because I got two tabs, i bought them yesterday for 500SEK (57 US$) from a friend at work.
And now I don't want to make the same mistake again.
[evol] said:
Hi thanks for your help!
I did an edit in my earlier post, and now i manage to install the 3G rom.
So I got my Tab up and running.
But I appreciate your help very much because I got two tabs, i bought them yesterday for 500SEK (57 US$) from a friend at work.
And now I don't want to make the same mistake again.
Click to expand...
Click to collapse
I'm glad it all worked out for you
Sent from my Z1 Compact
Awesome
Initial response is great. Checking into things. GReat job on what appears to be a solid rom.
Cant use 3g
Any ideas? ?
My 3G not working
Any solution?
Thanks
sidle said:
Keyboard is easily fixable by just flipping some switches in the settings.
Click to expand...
Click to collapse
Looks nice, still need to look into it.
Can't find what to change in the configuration to make the keyboard appears.
Can you guide me?

T-Mobile, LG-G4, H-811, MM AokpTT10 OS by TURBO AOKP-UNOFFICIAL Custom Rom, 07_07_16

Please, allow me to introduce Android Open Kang Project OS (aokp). Customized and optimized by me to be faster, stable and better sounding.
This custom rom is for the T-Mobile LG H-811 (LG4).
Features:
- Viper V4Android
- Super De-Bloated by me
- Optimized sound system by me
- Cleanest UI ever
Installation Instructions:
- Boot Into Recovery
- Perform A Full Wipe in Advance (Wipe everything but external sdcard)
- Flash rom
Credits and Sources:
source code: http://github.com/AOKP
CREDITS:
Thanks to all device maintainers of Sony devices on CM/AOKP/Omni/PA/PAC as everyone working on the device helps each other into making better ROMs.
Also thanks to Sony Mobile for being so helpful to developers.
XDAevDB Information
AOKP MM 6.0.1 Unofficial, ROM for the LG G4 T-Mobile H811
Contributors
superfes
Source Code: http://github.com/AOKP
Huge thanks to @codeworkx who made it possible!
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOKP
Download: LINK
great ROM. One issue I found was when the headphone plugged and the music playing, the google search comes up randomly. not sure if anything to do with settings. also the signal goes out and comes back
gents, release 07-05-16 is up.
log:
- updated to latest base
TURBO
Thank you Turbo,
was waiting for a long time for someone to post an AOKP Rom.
Will post feedback in a day
Cheers
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
Thank you Turbo,
was waiting for a long time for someone to post an AOKP Rom.
Will post feedback in a day
Cheers
Hey TURBO
ROM is great , no issues,
I had an offhand question for you though -
Is it just me or does V4A stop working on bluetooth sometimes?
And a reboot is the only way to fix that.
Thanks
rmdeathwish said:
Hey TURBO
ROM is great , no issues,
I had an offhand question for you though -
Is it just me or does V4A stop working on bluetooth sometimes?
And a reboot is the only way to fix that.
Thanks
Click to expand...
Click to collapse
Thank you!!! for your let us know........I dont get to fully test it, but v4a is kind of buggy. I think AudioFX is more stable. Probably in the future we should switch to AudioFX.... it works every time, but less features.....
TURBO
so i tested it out, no issues with the ROM, working perfectly (the only thing i wish was there was to add a long press to the navigation buttons to assign to menu etc. like in the stock rom)
V4A bluetooth is an issue, rarely but surely it does stop working and a reboot fixes this.
Also, AudioFX would be best, i may be wrong by Ive noticed starting with the Snapdragon 805 , the sound has been pretty good across.
Can you make a zip that replaces V4A with AudioFX?
Thanks again for another great ROM
rmdeathwish said:
so i tested it out, no issues with the ROM, working perfectly (the only thing i wish was there was to add a long press to the navigation buttons to assign to menu etc. like in the stock rom)
V4A bluetooth is an issue, rarely but surely it does stop working and a reboot fixes this.
Also, AudioFX would be best, i may be wrong by Ive noticed starting with the Snapdragon 805 , the sound has been pretty good across.
Can you make a zip that replaces V4A with AudioFX?
Thanks again for another great ROM
Click to expand...
Click to collapse
thank you rmdeathwish, for this report. As you know, I have too many roms to maintain, so creating zip files it doesnt make my life easier. I will replace viper with AudioFX in future releases.....
Thank you, again
TURBO
What gapps would you recommend? I fleshed open gapps and got a setup wizard fc that wouldnt go away
Sent from my LG-H811 using Tapatalk
bleedingthru said:
What gapps would you recommend? I fleshed open gapps and got a setup wizard fc that wouldnt go away
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Get the micro opengapps , works flawlessly
---------- Post added at 04:36 AM ---------- Previous post was at 04:35 AM ----------
TURBO2012 said:
thank you rmdeathwish, for this report. As you know, I have too many roms to maintain, so creating zip files it doesnt make my life easier. I will replace viper with AudioFX in future releases.....
Thank you, again
TURBO
Click to expand...
Click to collapse
I can understand, no rush
Thanks
gents, release 07-07-16 is up!!
log:
- updated to latest aokp base
- upgraded to new TT10
- very nice theme supplied with rom
TURBO
Downloaded this rom, did a full wipe. I then flashed the rom and gapps nano. When I boot into the rom for the first time I have no data connection, it shows Im connected to the network.
Thread closed as there are no valid links available in 1st POST.
OP, if you are reading this and want to have the thread reopened, then please report the thread with valid download link.

Categories

Resources