Database Develop

[SoundMod][T,V,Z] ViPER4Android (V4A) Audio Effects - 4.0 / 4.1 - UPDATED

Hi people,
I`m here to share with you this amazing SoundMod (Seriously, after that others dont deserves be called SoundMod)
See Official Thread here: http://forum.xda-developers.com/showthread.php?t=2191223
First of all, this is not my work, i haven`t any credit and responsibility about.
Before, wish to say that I had spent a lot time looking for a soundmod thats makes my Xperia T [Locked Bootloader] and after unsuccessful testin with AC!D, AwesomeBeats and other I finally get a significant gain in sound quality and louder with V4A.
Now lets blahblahblah away and work:
1- Description
Version: FX version 2.2.0.5 / XHiFi version 2.0.0.8
Codename: (FX version) Beautiful / (XHiFi version) X-Factor
Compiled date: April 21,2013 / April 21,2013 - Official Release
Operating environment: Android 2.3 / 4.0 / 4.1 / 4.2
Hardware platforms: ARM (ARM11, Cortex A8/A9 or higher)
FX Minimum requirement (Convolver turned off): A8 300MHz or ARM11 500MHz
FX Minimum requirement (Convolver turned on): A8 single-core 800MHz, recommended dual-core or quad-core 1.2GHz
XHiFi Minimum requirement (All effects turned on): A8 dual-core 1GHz or higher, does not support Tegra2 processor
Language: English (United States) / Simplified Chinese / Traditional Chinese
Software Description:
Important: In order to use the New In-App Installation, a full busybox must have been installed.
V4A FX version: Renders audio quality.
V4A XHiFi version: Restores audio quality.
V4A FX and XHiFi combined (Refer coexists installation): More settings to play with, but quality will be much magnificent!
Note: No matter you select FX or XHiFi in sound settings, they will run together at the same time.
Note: XHiFi only for headet/BT, to use XHiFi on speaker, activate lock effect mode in XHiFi app.
----------------------
Frequently Asked Questions: http://forum.xda-developers.com/show...php?p=39156718
V4A Settings Explained & Recommended Settings Handguide: http://forum.xda-developers.com/show...php?p=39156748
How to use the FIR Equalizer? see: http://forum.xda-developers.com/show...php?p=39156761
MyAudio Profiles: http://forum.xda-developers.com/show...php?p=39157202
For Poweramp and system-provided music players (such as MIUI music player, Apollo etc.):
After FX v2204, XHiFi v2007:
To use V4A with Poweramp properly, you need to follow the steps below.
In both FX and XHiFi app, switch to Compatible Mode. Then reboot.
NEW Compatible Mode:
Compatible Mode supports large variety of music players and the players' own EQ/sound effects (system-provided/third party)
Therefore, you don't have to select V4A in Sound Settings > Music Effects, choose anything other than V4A. Just run V4A app and the effects will be working with anything else.
1. In option, switch to Compatible Mode. Reboot, done.
2. In Sound Settings > Music Effects, choose other than V4A.
3. Run V4A app and configure the settings then the effects will work together with the one you chose in Sound Settings.
NEW Safe Mode:
If V4A dont work on many players, try switching to Safe Mode to work with almost any music player.
1. In option, switch to Safe Mode. Reboot, done.
Installation instructions in 2 post
All credits by V4A must be given to [email protected] VIPER520 who created V4A and [email protected] who translated of chinese to English
Official VIPER4Android Thread

Installation:
Latest version change log:
FX version: v2.2.0.5
1. Increase toolbox compatibility, improve In-app installation success rate.
2. Fix Continuous install/update popup when enter v4a app.
Note: 2005 only fixes the above bugs, there's no update on lib or effect, so users with 2004 working can skip this version.
FX version: v2.2.0.4 FIXED
NEW. FIXED INSTALLATION
1.CPU load optimization.
2.Add changelog view in menu.
3.Auto driver compatible install and update with ViPER4Android, no longer need to manually install.
4.Add driver safe mode. If you got no audio effect, you can try to switch to safemode.
5.Add normal and compatible mode. If you got no audio effect, you can try to switch to compatible mode.
6.Improve the stability of convolver.
7.Effect profile support save and load.
8.Improved UI interface and logic.
XHiFi version: v2.0.0.8
1.Fix driver unistall process where FX driver also get installed.
2.Fix eq preset selection in Tegra2 platform.
XHiFi version: v2.0.0.7
1.Add changelog view in menu.
2.Auto driver compatible install and update with ViPER4Android, no longer need to manually install.
3.Add driver safe mode. If you got no audio effect, you can try to switch to safemode.
4.Add normal and compatible mode. If you got no audio effect, you can try to switch to compatible mode.
5.Effect profile support save and load.
6.Improved UI interface and logic.
7.Tweak parameters of audio reconstruct.
8.Support TEGRA2 & ARMv5TE chip, both select "Tegra2" driver.
9.Installation process will use toolbox first.
=============================================================================================
Bugs/Issues:
1. FX Sound Effect Profile -> cannot delete/replace saved profiles. Users have to delete manually in "/ViPER4Android/Profile/"
2. FX Continuous install/update popup on certain devices.
=============================================================================================
Downloads
To make things easier below links only for automatic instalation
NOTE: Now I`m using PureXaudio + V4A. I noticed a better improvement with both togheter. I made this by my own, if you wanna try then flash PureXaudio, then after add path for V4A drivers into PureXaudio moddified "audio_efects.conf" located in /system/etc/ and /system/vendor/etc/
(You can try make automatic install mode after install PureXaudio, should works too).
In order to use the New In-App Installation, a full busybox must have been installed.
FX version v2.2.0.5: AFH (In-App Installation 2.3/4.0/4.1/4.2)
XHiFi version v2.0.0.8: AFH (In-App Installation 2.3/4.0/4.1/4.2)
IRSamples for Convolver: Updated 15Apr - en_331 MF download
V4A FX Impulse Response SampleThread
V4A FX and XHiFi coexist: Install both FX and XHiFi like normally you do. Done.
Note: If you want to use Compatible Mode, switch BOTH (FX and XHiFi) to FX Compatible Mode.
No matter you select FX or XHiFi in sound settings, they will run together at the same time.
IF YOU FOLLOWED EXACTLY AS ABOVE THE SOUNDS OF YOUR XPERIAS WILL ROCK!!!
I am not responsible for NOTHING if your phone dies, please read and educate yourself fully before attempting any mod on your phone.
If this thread was useful for you, please don`t forget to hit THANKS button :good:

***CREDITS***
ViPER4Android (V4A) Audio Effects
Copyright (C) 2006-2016 vipercn.com
Translated and refined by [email protected]
XDA Official Maintainer [email protected] http://forum.xda-developers.com/member.php?u=3901724

Im doing this stuff but I saw this:
path /system/lib/soundfx/libv4a_xhifi_ics.so
}
v4a_fx {
path /system/lib/soundfx/libv4a_fx_ics.so
}"
But....Is it ok to write ICS???? Cause we are at JB now....so is it normal?

TugaSoulHunter said:
Im doing this stuff but I saw this:
path /system/lib/soundfx/libv4a_xhifi_ics.so
}
v4a_fx {
path /system/lib/soundfx/libv4a_fx_ics.so
}"
But....Is it ok to write ICS???? Cause we are at JB now....so is it normal?
Click to expand...
Click to collapse
No problem! I`m on JB 4.1.2 on my Xperia T and is OK.
Also suppots Jb 4.2 as said in Official thread...
Be carefull with aligment of the lines and don`forget to save copy or rename original as .bak

Im allmost finishing this....This improve phones or it improves speaker as well?
point 2.0 WTF? I don´t get it.... root in SDCARD????

TugaSoulHunter said:
Im allmost finishing this....This improve phones or it improves speaker as well?
point 2.0 WTF? I don´t get it.... root in SDCARD????
Click to expand...
Click to collapse
Sorry! I was in my job when post here, no much time to white and thinkin...
Allready fix it on 2.0
In response to your question:
R: To keep speaker activated you need to lock mode in FX and XHIFI aplications. (Speaker had improves, but not so much as noticed in headphones)

KriegerBread said:
Sorry! I was in my job when post here, no much time to white and thinkin...
Allready fix it on 2.0
In response to your question:
R: To keep speaker activated you need to lock mode in FX and XHIFI aplications. (Speaker had improves, but not so much as noticed in headphones)
Click to expand...
Click to collapse
Thank you for your quick response. I finished all the process but FX Aplication doesn´t open, only the XHIFI....any ideas why?

TugaSoulHunter said:
Thank you for your quick response. I finished all the process but FX Aplication doesn´t open, only the XHIFI....any ideas why?
Click to expand...
Click to collapse
Open audio_effects.conf located in /system/etc/ and delete lines:
Delete this below libraries:
"v4a_fx {
path /system/lib/soundfx/libv4a_fx_ics.so
}"
Delete this below effects:
"v4a_standard_fx {
library v4a_fx
uuid 41d3c987-e6cf-11e3-a88a-11aba5d5c51b
}"
Do that only for audio_effects.conf thats located on system/etc/
audio_effects.conf file located in /system/vendor/etc/ keeps the same.
Se my audio_effects.conf files in attachment. (Dont forget I on Experiment 2.3 LB and our conf files mays be different)
The file audio_effects.config(vendor-etc).txt refer to /system/vendor/etc/
Edit .txt to default .conf

I only undestood until erase those lines....what do I do with those 2 files that you sent? Thanks

TugaSoulHunter said:
I only undestood until erase those lines....what do I do with those 2 files that you sent? Thanks
Click to expand...
Click to collapse
I share my audio_effects.conf just to you compare with your.
For me FX and XHIFI Works OK as you can see in screenshoots below:
Send from my Xperia T lt30p Xperiment 2.3 PB ** V6 Supercharged

I´ll see what I can do....In you explanation, you put the FX lines after the XHIFI....could that be the problem?
EDIT: I´ve made the changes but the FX apk doesn´t open....only the XHIFI :/ And it´s the one that i´m interested that doesn´t open....the FX one. Do I need to have Unlocked BL?

TugaSoulHunter said:
I´ll see what I can do....In you explanation, you put the FX lines after the XHIFI....could that be the problem?
EDIT: I´ve made the changes but the FX apk doesn´t open....only the XHIFI :/ And it´s the one that i´m interested that doesn´t open....the FX one. Do I need to have Unlocked BL?
Click to expand...
Click to collapse
No needed unlocked bootloader.
No problem, the lines just give the path to driver.
Did you fixed permissions and reboot?
What device is yours? Xperia T lt30p?
If yes, them replace your edited files for respectively audio_effects.conf files I shared in system/etc and system/vendor/etc.
Dont forget to delete .txt extensions and (vendor-etc) on second file.
Them reboot, then reintall FX and open...
Hope be helpfull.
Send from my Xperia T lt30p Xperiment 2.3 PB ** V6 Supercharged

KriegerBread said:
No needed unlocked bootloader.
No problem, the lines just give the path to driver.
Did you fixed permissions and reboot?
What device is yours? Xperia T lt30p?
If yes, them replace your edited files for respectively audio_effects.conf files I shared in system/etc and system/vendor/etc.
Dont forget to delete .txt extensions and (vendor-etc) on second file.
Them reboot, then reintall FX and open...
Hope be helpfull.
It WORKED Cheeers xD
Click to expand...
Click to collapse

I see very complex

charmidz said:
I see very complex
Click to expand...
Click to collapse
Edit audio files is only a bit more boring part of process...
If you lazy and don't want to edit files then you can download txt I've attached in #9 post from my xperia T. ( backup the originals)
After all, the only work you'll have to do with this is: Download>Copy>Rename>Replace files...
As you see, the guy get it all workin...
Sent from my LT30p using xda premium

TugaSoulHunter said:
KriegerBread said:
No needed unlocked bootloader.
No problem, the lines just give the path to driver.
Did you fixed permissions and reboot?
What device is yours? Xperia T lt30p?
If yes, them replace your edited files for respectively audio_effects.conf files I shared in system/etc and system/vendor/etc.
Dont forget to delete .txt extensions and (vendor-etc) on second file.
Them reboot, then reintall FX and open...
Hope be helpfull.
It WORKED Cheeers xD
Click to expand...
Click to collapse
Nice!
Take a note about enable Compolser impulse and headset, almost low-end headset will distorce in high volume levels, so its recommended a high or mid-end headset... Try the diffrents irs profiles and see
Sent from my LT30p using xda premium
Click to expand...
Click to collapse

KriegerBread said:
Edit audio files is only a bit more boring part of process...
If you lazy and don't want to edit files then you can download txt I've attached in #9 post from my xperia T. ( backup the originals)
After all, the only work you'll have to do with this is: Download>Copy>Rename>Replace files...
As you see, the guy get it all workin...
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
thank u
Xperia V can run file XT ??? :smile:

This is awesome, a little tricky to install but finally we got a working and awesome Sound mod. Using stock Wired headset sounfs quite good but indeed with some better ones the Sound ROCKS!!

charmidz said:
thank u
Xperia V can run file XT ??? :smile:
Click to expand...
Click to collapse
Compare your audio_effects.conf with txt files that I shared in #9post.
If different just edit the lines, if is the same you can replace it on your device (backup original conf files before)
Sent from my LT30p using xda premium

[MOD] ACID Audio Engine V7.0

MUSIC LOVERS
RECOMMEND YOU TO USE N7 OR POWER AMP
CHANGE-LOG:
● Rebuild once-again after my old beats audio version 5
● Optimize for every devices
● Should work on all AOSP roms
● Stable
● New library files
● Latest Beats Audio files
● Removed ALSA
● SRS with Surround sound
● WOWHD BASS enabled
● SRS_WOWHD values tweaked (clean reverberation)
● SRS CHSP EQ and Compression tweaked
● New Clearaudio Engine JB from sources
● Clearphase is now effective
● New Downmix lib with tweek 4 crispier sound
● New snd pcm cards for better audio rendering
● New resampling libs and tweaks (48khz)
● Deep and Clear
● Cristal Voice ( JB clearaudio +)
● Louder volume
● Awesome Sound, Powerfull and Deep Bass, Clear Audio, Cristal Voice, Clean Sound without distortion
● Awesome beats
● NEW ACID AUDIO FILE TO CHECK WHETHER THE IMPORTANT TWEEKS ARE LOADED CORRECTLY
● Removed unwanted files
● Optimized configuration files
● More Equalizer Presets
● etc etc.................................
-Now It'll automatically delete dsp manager(thanks to x0xhellx0x for the tip)
Originally Posted by ilya404
1.Take nandroid backup
2. Wipe Cache and Dalvik Cache
3.Flash the downloaded file in CWM (First 2802 then 2805)
4.Wipe dalvik cache + Cache
5.reboot your phone
ACTIVATION
Method 1
1.Go to Terminal emulator
2.Type(After su press enter)
Code:
su
aaengine
that's all It will correct the build.prop tweeks
If you still get any errors like "need permission" "Permission denied" blah blah ...
1.Download and Install ES explorer
2.go to settings=>Other settings=>Root settings=>Tick first three boxes(Root explorer,Up to Root,Mount file system)
3.Go to your root of your system
4.system=>bin
5.long press the aaengine
6.select properties
7.Change permission to rwxr r-- r-- (Like below)
(read write execute
User ✔ ✔ ✔
Group ✔
Other ✔)
OR
Method 2
Type
Code:
su
mount -o rw,remount /system
aaengine
Click to expand...
Click to collapse
Tested by me on Optimus 4X HD rom JellyBeer - v4.32 and running smoothly
gain improves very good :victory:
It should work on any device ICS / JB (Second Developer)
As reported by a User does not work in version 4.1.2 of stock
Optimus 4X HD
Thanks:
Knight47
r-ikfoot
Rizal Lovins
Till-Kruspe
ThilinaC
Krabappel2548
Lalitchhabaria
fuser1337
Original posting by them

whooha
awesomeee
thank you try it later!
That's the thing I was looking for!!!!
:thumbup::thumbup::thumbup::thumbup::thumbup:
We have to remove dsp manager?
Sent from my LG-P880 using xda app-developers app

UncleRipper said:
whooha
awesomeee
thank you try it later!
That's the thing I was looking for!!!!
:thumbup::thumbup::thumbup::thumbup::thumbup:
We have to remove dsp manager?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
The dsp manager automatically removes alone in this version

hey, is it normal?
Sent from my LG-P880 using xda app-developers app

UncleRipper said:
hey, is it normal?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
No, it isn't. Mount system as writable first as root using this command:
Code:
mount -o remount,rw /system

UncleRipper said:
hey, is it normal?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Enter > su
Enter > mount -o rw,remount /system
Enter > aaengine

Installed but don't really see a difference from dsp
Sent from my LG-P880 using xda app-developers app

juanacevedo said:
Installed but don't really see a difference from dsp
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Sure you did right? when you put the headset with the symbol name acid appears in the status bar and the dsp was actually excluded because in his place appears 'awesome beats''

Is it possible on stock? And if not can you make it possible?
Sent from my LG-P880 using xda app-developers app

noppoer2 said:
Is it possible on stock? And if not can you make it possible?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
As stated above works on any device with Ice cream sandwich version
or Jelly Bean with root then work on your own !

I installed this. Got it working straight away and man this is sick . I can feel the diffrence. Without this i could barely hear the music.
I still can flash different kernel though?

Hallako said:
I installed this. Got it working straight away and man this is sick . I can feel the diffrence. Without this i could barely hear the music.
I still can flash different kernel though?
Click to expand...
Click to collapse
You are free to use any kernel or rom ICS / JB with no problem

Please could you describe in more detail the below quoted points? Is this project open source? What new resampling libs and library files did you use? Does new snd PCM audio cards mean support for new audio codecs? Was ALSA completely removed? If so, what kind of kernel driver set substitutes ALSA? What is the purpose of downmix lib? What is clear audio and clear phase? What part of lib or framework is SRS / WOWHD / CHSP part of?
LMartins.338 said:
MUSIC LOVERS
● beats audio version 5
● N7 OR POWER AMP
● New library files
● Latest Beats Audio files
● Removed ALSA
● SRS with Surround sound
● WOWHD BASS enabled
● SRS_WOWHD values tweaked (clean reverberation)
● SRS CHSP EQ and Compression tweaked
● New Clearaudio Engine JB from sources
● Clearphase is now effective
● New Downmix lib
● New snd pcm cards for better audio rendering
● New resampling libs and tweaks (48khz)
Click to expand...
Click to collapse
thx

Xdasc said:
Please could you describe in more detail the below quoted points? Is this project open source? What new resampling libs and library files did you use? Does new snd PCM audio cards mean support for new audio codecs? Was ALSA completely removed? If so, what kind of kernel driver set substitutes ALSA? What is the purpose of downmix lib? What is clear audio and clear phase? What part of lib or framework is SRS / WOWHD / CHSP part of?
thx
Click to expand...
Click to collapse
For this information I recommend that you read the original post
http://forum.xda-developers.com/showthread.php?t=1923630

Ok I now understand that's ports from Sony (ACID, Walkman including SRS) or HTC (BeatsAudio) and that N7 and PowerAmp are music players but what I'm specifically interested in is what open source libraries were used in this mod and what new source has been developed for this mod (you mentioned downmix lib and new resampling lib) and also I'm not sure about the ALSA removal - did you guys develop another sound architecture for the kernel ? Another audio server? Or just removed ALSA userspace libs?
thx

Wow!
What a fantastic mod! This needs to be available to everyone and anyone! (Play Store) The range i think i was getting with out the mod was probably 40hz-18khz it now sounds like 5hz-22khz. Its crystal clear, the bass is much deeper and overall its more louder.
Brilliant mod! More enjoyable listening experience! Sounds like I'm listening to huge sub-woofers but i'm not, i'm using cheap in-ear earphones! :good:

Xdasc said:
Ok I now understand that's ports from Sony (ACID, Walkman including SRS) or HTC (BeatsAudio) and that N7 and PowerAmp are music players but what I'm specifically interested in is what open source libraries were used in this mod and what new source has been developed for this mod (you mentioned downmix lib and new resampling lib) and also I'm not sure about the ALSA removal - did you guys develop another sound architecture for the kernel ? Another audio server? Or just removed ALSA userspace libs?
thx
Click to expand...
Click to collapse
I am no part of the development of the mod, I'm just sharing this
great job you find the developer on the link I gave you!
But any other questions related to installation I will be here ok

Ah I understand thanks for the info!

Nice
Sent from my LG-P880 using xda app-developers app

botanical sdangy
I installed it, but not see any difference

[AUDIO TWEAKS][JB 4.1+] SONY Audio Enhancement for Xperia T/TL/TX/V

Hello Xperia friends ....
Great news, i have some Tweaks for you and some fix for stock JB 4.3 ...This Tweaks will enhance Audio by default on Speaker and Headphone/Headset and can be loaded on sound enhancement​
Requirement :
- Stock ROM Xperia JB4.1 JB 4.2 JB4.3
- Rooted And Recovery Installed
Changelog :
Code:
- Bringback SoundAura Driver for Virtualizer in JB 4.3
- Fix Hearing Protection on Sound Enhancement in JB 4.3
- Added Kitkat Audio Driver with added config value
- Enable Qualcomm S4 Bass booster by default
- Enable Qualcomm Audio Pre Processing by default
- Enable Qualcomm Visualizer Driver
Download : http://d-h.st/AXG
How to install :
Before installing please edit your build.prop
Find this line
Code:
# System prop to select audio resampler quality
af.resampler.quality=225
Change to
Code:
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
- Reboot into recovery
- Flash this tweaks
- Reboot
Enjoy!!! :laugh:
Thanks to SONY Mobile and Qualcomm that made all this possible

great news, after tried a lot of audio driver that could be enhance audio quality by default and can be loaded by Sound Enhancement Stock Xperia, and now i have some Tweaks for you and some fix for stock JB 4.3 ...This Tweaks will enhance Audio by default on Speaker and Headphone/Headset.
hi there, does this mod only affect the sound enhancement apk, as I have deleted this and Walkman in favour for poweramp which I often use to feed my PA aswell as my laptop with foobar?

after follow your guide. unfortunately sound enhancements has stoped. please help, i'm using TX 4.1.2

bruce1x said:
hi there, does this mod only affect the sound enhancement apk, as I have deleted this and Walkman in favour for poweramp which I often use to feed my PA aswell as my laptop with foobar?
Click to expand...
Click to collapse
Don't know if this will work for poweramp, i haven't test it, but i think it will not work, i mean it will not increase audio quality.
But please try this tweak, i want to know if it work on poweramp

devilmaycry2020 said:
after follow your guide. unfortunately sound enhancements has stoped. please help, i'm using TX 4.1.2
Click to expand...
Click to collapse
Did you backup current ROM? If you have custom rom zip from JB 4.1? If so, copy all soundfx file into your current ROM and set permissions to rw-r--r-- (644)
If still FC, you need to replace audio_effect.conf with original file in system/vendor/etc

Used on XT, Doomlord 199, works like charm.

Rizal Lovins said:
Don't know if this will work for poweramp, i haven't test it, but i think it will not work, i mean it will not increase audio quality.
But please try this tweak, i want to know if it work on poweramp
Click to expand...
Click to collapse
ok this is what I have tried. flashed the mod and rebooted. no change on audio, so I installed the sound enhancement apk and rebooted. enebled it in poweramp, to access this in poweramp you have to simply hit tone control settings then long press on it, unfortunatley there is and always been a problem with this as a sudden drop in volume occurs, even with the volume and preamp on full its still to low. I havn't noticed any audio change, but this was simply done using £120 headphones, as I have no audio testing equipment.

bruce1x said:
ok this is what I have tried. flashed the mod and rebooted. no change on audio, so I installed the sound enhancement apk and rebooted. enebled it in poweramp, to access this in poweramp you have to simply hit tone control settings then long press on it, unfortunatley there is and always been a problem with this as a sudden drop in volume occurs, even with the volume and preamp on full its still to low. I havn't noticed any audio change, but this was simply done using £120 headphones, as I have no audio testing equipment.
Click to expand...
Click to collapse
works with Walkman app and now has the better sound quality than poweramp. previously both these apps had a very similar sound. where as now the Walkman one is much more open and far better clarity. not sure whether to thank you though as I had to pay for the other lol.

works but seems laggy when openning Volume in settings
edit: after wipe dalvik cache and cache it solves

...thanks
but works not with Apollo : https://f-droid.org/repository/browse/?fdfilter=apollo&fdid=com.andrew.apollo
"soundoptimizing crashed"

Working under .199 version and Z2 walkman apk!
With .295 I experienced some micro-stops, but with .199 no issues so far. It is not such a difference but I still notice the enhanced bass of the mod.
Good job! :good:

Work well! :good:

volumen error, why?

Wow great...
Work in my xperia M
Thanx master

works brilliant on t/.205. awesome job. : )

This is working my Xperia Sp Stock 4.3?

I was hoping this mod could bring me back my a-jay's headset (lost since upgrade to 4.3), missed !

JesusBass said:
volumen error, why?
Click to expand...
Click to collapse
It's not related my mod buddy, it's bug from SONY, you can fix it by remove android-res.apk on system/vendor/overlay
jancsessz said:
This is working my Xperia Sp Stock 4.3?
Click to expand...
Click to collapse
Yes will work, but only in WALKMAN

Splendid! The audio change is simply superb! You have my greatest gratitude and respect! (TX 4.3 - .205)

@Rizal Lovins
screenshot about your modding please

Increase loudspeaker volume

Any way to increase incall speaker volume it is too low on all Marshmallow roms aside from MIUI, I need xposed so can't use lineage. Thanks

Install viper audio with Dolby Atmos. Open Dolby Atmos and set "Volume Leveler" on. It will give a boost to the sound. Also, unrar the attached rar file, and replace the existing files under /system/etc/ with unzipped files. For me on Mokee rom, those working well.

bidhata said:
Install viper audio with Dolby Atmos. Open Dolby Atmos and set "Volume Leveler" on. It will give a boost to the sound. Also, unrar the attached rar file, and replace the existing files under /system/etc/ with unzipped files. For me on Mokee rom, those working well.
Click to expand...
Click to collapse
Thanks for the reply. My rom does not have mixer paths and mixther paths i2s only tasha does that matter?

Yes. Though as I saved those as all ROM purpose ( Mi Specific ), so I just push all files under /system/etc, but actually tasha one will work on CM based ROMs. Please share your experience after testing.

Will do, thanks. Mokee is cm based also yes? So it wouldn't have the mixer paths XML either right? Just the Tasha one?

Last Post edited so it's actually readable. Must have been half asleep when I originally wrote it.

Successfully did it with Stereo speaker mod shared in this forum. I modified few values on mixer_paths_tasha.xml, made Dolby Atmos speaker optimization onmanually, and now my speaker sound is loud enough. Flashable zip attached with this post. After installing this from TWRP, reboot and enjoy loud volume on speaker and headphone.

bidhata said:
Successfully did it with Stereo speaker mod shared in this forum. I modified few values on mixer_paths_tasha.xml, made Dolby Atmos speaker optimization onmanually, and now my speaker sound is loud enough. Flashable zip attached with this post. After installing this from TWRP, reboot and enjoy loud volume on speaker and headphone.
Click to expand...
Click to collapse
Thanks a lot i'll give it a try

bidhata said:
Successfully did it with Stereo speaker mod shared in this forum. I modified few values on mixer_paths_tasha.xml, made Dolby Atmos speaker optimization onmanually, and now my speaker sound is loud enough. Flashable zip attached with this post. After installing this from TWRP, reboot and enjoy loud volume on speaker and headphone.
Click to expand...
Click to collapse
Sound not out while play a game like mobile legend ini miui

Wicked Beats[Viper4Android][Dolby Atmos][6.x-8.x][sound mod]

hi guys, it's been a pleasure to share the ultimate sound mod Wicked beats for you all. Got bored listening to flat sound without proper beats? just try this mod. this is what you missed this many days - you will only know that you have missed this only if you use this. Better give a Try.
#You will get Maximum sound with Very less Distortion.
#Feel the beats.
WORKS WITH:
Music Apps
Video players
Games
camera apps
Spotify
YouTube
NetFlix and many more.....
I just gathered a collection of files for creating this mod such as.,
Dolby surround system
Viper4android
Sony Walkman
Pon-3 Audio
eXpress Engine ???
SFORCE SURROUND 3D
Noozxoide EIZO-rewire PRO
Louder output in headphones and speaker
Bass enchancement
MegaBass
Divine Equalizer
Am3D Zirene Audio Fx???
Dolby Digital+
New Modified DTS and SRS Audio
48,000 KHz Sampling Rate
Faster Audio Processing
Dolby Digital Plus Libs
Dolby Atmos
Beats Audio Libs
Sony ClearAudio and XLoud libs ???
SRS Processing
DTS Processing
Now your beloved WickedBeats is more battery friendly.
Xperia Z5 Premium Marshmallow's audio
Vivo-Xplay libs.???
Latest Samsung Libs
Sony LDAC technology.
HTC 10 Libs.
More punchy and effective Bass
Auditory System Protection.
Reduced Sound Distortion even at high customizations.???
Merged eXtremeBeats Aural Maximizer.
INSTALLATION PROCEDURE:
Take a nandroid backup just in case....
download the zip file
flash it in recovery (install)
Reboot mobile.
FAQ:
#Viper4android shows "install driver"?
Install viper4android and wicked beats or wicked beats without Dolby Atmos zip. Now everything will work.
#what is working?
This Wicked Beats mod works with all media apps for example Music, video, camera and many more
#what if viper not working?
clear cache of the app.
#How to uninstall Wicked Beats Completely
download and flash the zip file I provided in below
DISCLAIMER:
*I am not responsible for bricked devices, Proceed at your own risk.
*Dont forget to click the like button if you love my mod
*Ask me if you want something to added for the next update.
*I recommend BLACKPLAYER (music player) for better sound combo.
*Developers are allowed to merge this with their Rom.
Credits
@Er Ic Ks
@zhuhang
@dolby
@Sony
@Beats
@Viper4android
Finally Me
Source [Github]
FX: https://github.com/vipersaudio/viper4android_fx
XHiFi: https://github.com/vipersaudio/viper4android_xhifi
ViPER's Audio founded by ViPER520.
Co-founded by ZhuHang.
CN. vipersaudio.com / EN. facebook.com/vipersaudio
Copyright (C) 2006-2018 vipercn.com / vipersaudio.com
DOWNLOAD LINK
WICKED BEATS FLASHABLE INSTALL ZIP [28Mb]
https://drive.google.com/file/d/1UGCyxS5uyRHOgIz2hteisFsdgKGLZTiY/view?usp=drivesdk
WICKED BEATS WITHOUT DOLBY ATOMS AND WITH ALL OTHER MOD FILES
https://mega.nz/#!wOwHyQDT!wWXXzBoGjJG0E4yfJIc1XrWKiLJqegVWslPkC7IJRv8 [11-Jan-2018]
WICKED BEATS FLASHABLE UNINSTALL ZIP [261Kb]
https://drive.google.com/file/d/1K4ZXBDU03BOAOiwJ7491Lz0-btCLKyvq/view?usp=drivesdk
ADDITIONAL FILES DOWNLOAD:
Effect profile for viper [contains 7 profiles 54kb]
https://drive.google.com/file/d/1L-RiqyEEclkPS5866qyV1YRG3w8_b8LW/view?usp=drivesdk
how to make effect profile work?
download the effect profile zip and unzip it
now copy the folder "Viper4android" and paste it in internal storage
now open the Viper app --> open the menu ? and select load effect profile
select the profile you want and enjoy,
My Separate thread for Viper4android for Android Oreo 8.1 visit
https://forum.xda-developers.com/android/software/sound-mod-viper4android-oreo-t3734107

screenshots set 1

screenshot set 2

screenshot set 3

Where is link?

Shreyash01 said:
Where is link?
Click to expand...
Click to collapse
mistakenly it was gone, now it is back.
https://drive.google.com/file/d/1UGCyxS5uyRHOgIz2hteisFsdgKGLZTiY/view?usp=drivesdk

Will it work in deodoxed 7.0?

Shreyash01 said:
Will it work in deodoxed 7.0?
Click to expand...
Click to collapse
yes, also checkout the effect profiles.

Awesome..!
Please make more mods

Shreyash01 said:
Awesome..!
Please make more mods
Click to expand...
Click to collapse
I will, have fun. ✌

Good job man! All works fine on stock S251!

matteo0026 said:
Good job man! All works fine on stock S251!
Click to expand...
Click to collapse
enjoy ✌

viper4android driver don't process kills my sound for few sec when open the app, tested to clean app cache, reinstall driver dont help. Dolby work. On StockRom
have fixed it when change selinux to permissive
thanks good mod!

vojv0da said:
viper4android driver don't process kills my sound for few sec when open the app, tested to clean app cache, reinstall driver dont help. Dolby work. On StockRom
have fixed it when change selinux to permissive
thanks good mod!
Click to expand...
Click to collapse
You will get bugs and errors if you flash it over any other sound mod, so if you have any sound mod (mostly Dolby or Viper) uninstall using my uninstall zip provided in the top of the thread. Then install wicked beats it should be fine. (no offense) have fun ✌

Attention guys,
Request any app, theme or Mod thread moved to guides and discussion page.

I am using stock rom with encryption, can I flash this mod from stock recovery P2a42

rkpg said:
I am using stock rom with encryption, can I flash this mod from stock recovery P2a42
Click to expand...
Click to collapse
Yes ✌

Wonder Wicked Witch said:
Yes ✌
Click to expand...
Click to collapse
But when I click update zip in stock recovery, it shows update only performs in non encrypted external sd card. Do i need to ignore and continue with flashing. Also do i need to change the zip file name to 'update' to flash. Thanks...

rkpg said:
But when I click update zip in stock recovery, it shows update only performs in non encrypted external sd card. Do i need to ignore and continue with flashing. Also do i need to change the zip file name to 'update' to flash. Thanks...
Click to expand...
Click to collapse
You cannot use it in stock recovery, TWRP recovery required. ✌

Does it work
With LOS 14.1?