I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Kernel Sources: here
Downloads: recovery-yu.img
WoW! That was quick!! Thanks
TheStrix said:
WoW! That was quick!! Thanks
Click to expand...
Click to collapse
Hi,
Great, as any body try to flash the ROM on a CoolPad F2 8675-W00 (same ?)
Regards
Marc
mslr said:
Hi,
Great, as any body try to flash the ROM on a CoolPad F2 8675-W00 (same ?)
Regards
Marc
Click to expand...
Click to collapse
I would try if I had the ROM. Any one knows where to get one?
mslr said:
Hi,
Great, as any body try to flash the ROM on a CoolPad F2 8675-W00 (same ?)
Regards
Marc
Click to expand...
Click to collapse
DiZet said:
I would try if I had the ROM. Any one knows where to get one?
Click to expand...
Click to collapse
I would not recommend doing that
vishal_android freak said:
I would not recommend doing that
Click to expand...
Click to collapse
Why ?
It's not the same hardware ? same CPU Snapdragon 615, same memory, same camera, etc ... ?
Regards
Mar
mslr said:
Why ?
It's not the same hardware ? same CPU Snapdragon 615, same memory, same camera, etc ... ?
Regards
Mar
Click to expand...
Click to collapse
fetch kernel from coolpad f2 then unpack recovery img and replace kernel and repack hopefully it will wrk same goes with roms replace kernel
dont try without replacing kernel
or if u could build it yourserlf here is device specific sources https://github.com/YUPlayGod
this is exact clone of coolpad f2 and the sources have been fetched from coolpad f2 device tree
https://github.com/YUPlayGod/androi...mmit/06504ddcc2cfa19e6a06fca0abc7f1856244fd83
loooooooooooooool
cp8675 was the codename for coolpad f2 which was renamed to yureka later
https://github.com/YUPlayGod/android_device_yu_tomato/commits/cm-11.0?page=7
vishal_android freak said:
I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Downloads: recovery-yu.img
Click to expand...
Click to collapse
Please provide link to the kernel source you used, or note which kernel is used.
jerdog said:
Please provide link to the kernel source you used, or note which kernel is used.
Click to expand...
Click to collapse
Well my bad there. Completely forgot about it. Done.
sooorajjj said:
fetch kernel from coolpad f2 then unpack recovery img and replace kernel and repack hopefully it will wrk same goes with roms replace kernel
dont try without replacing kernel
or if u could build it yourserlf here is device specific sources https://github.com/YUPlayGod
this is exact clone of coolpad f2 and the sources have been fetched from coolpad f2 device tree
https://github.com/YUPlayGod/androi...mmit/06504ddcc2cfa19e6a06fca0abc7f1856244fd83
loooooooooooooool
cp8675 was the codename for coolpad f2 which was renamed to yureka later
https://github.com/YUPlayGod/android_device_yu_tomato/commits/cm-11.0?page=7
Click to expand...
Click to collapse
It's seen a little complicated for me, maybe with more information ?
I have a custom recovery TWRP Coolpad_8675_W00_Recovery
and i have two rom the official ota_full_040_P1_signed.zip and the custom Lollypop_Rom_coolpad_F2_w00.zip
maybe with this and a Yureka rom i can made a rom for coolpad but how ?
Regards
Marc
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
vishal_android freak said:
I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Kernel Sources: here
Downloads: recovery-yu.img
Click to expand...
Click to collapse
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
janajackie said:
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
Click to expand...
Click to collapse
aashking said:
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
Click to expand...
Click to collapse
See this thread HERE
is there any way to check the botloader status .. i flashed the recovery successfully .. but i am not sure wethere my bootloader got properly unlocked.. so is there a way to check it
janajackie said:
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
Click to expand...
Click to collapse
aashking said:
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
Click to expand...
Click to collapse
You need to add the vendor id. Without that it won't get detected. If you want to check if device is connected in fastboot, type in terminal:
Code:
fastboot -i 0x1ebf devices
Without "0x1ebf" it won't detect the device. Security measures Just follow steps in the first post
janajackie said:
is there any way to check the botloader status .. i flashed the recovery successfully .. but i am not sure wethere my bootloader got properly unlocked.. so is there a way to check it
Click to expand...
Click to collapse
If the recovery got flashed successfully that itself proves your bootloader is unlocked
thank you dude .. so i successfully did it ...this link also helped me
http://www.informationlord.com/unlock-bootloader-micromax-yu/
---------- Post added at 11:05 AM ---------- Previous post was at 11:02 AM ----------
so nw i got the device. its bootloader unlocked , cwm flashed and rooted.. i dont know any coding or rom development.. but if someone here has time.. pls give me a guide .. i will help you with my device.
You can upload backup cwm for which we coolpad?
I can retrieve the software if Brick.
If you want to send me the link for private and if it works I put it here.
Thanks for everything guys.
request for proprietary blobs
@vishal_android freak
if you have the device could u pls upload vendor propritary blobs to github by running extract-files.sh
thank you
janajackie said:
thank you dude .. so i successfully did it ...this link also helped me
http://www.informationlord.com/unlock-bootloader-micromax-yu/
---------- Post added at 11:05 AM ---------- Previous post was at 11:02 AM ----------
so nw i got the device. its bootloader unlocked , cwm flashed and rooted.. i dont know any coding or rom development.. but if someone here has time.. pls give me a guide .. i will help you with my device.
Click to expand...
Click to collapse
That link itself is based on this. Anyways, I have compiled cm11 for personal use. It's of no use making an altogether different thread for it because you are already running cyanogen
Related
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
Hi friends today I am going to tell you how to root k4 note which have Android 6.0 (M.M).
Many members have already given this process but in some place the needed files are missing and some other place the process is not explained clearly. So to slove this I have made all in one file and given the process as simple as possible by me.
This process have worked very fine for me. Rooted 8 k4 notes without any problem.
Read all and follow. And do it on your own risk. I am not responsible if anything go wrong.
First of all I would like to introduce myself ( I know it's not necessary but to some of them to believe my work )
Myself is Kaushik. I have been using XDA since 2 years but never opened an account and replied in posts. Now after learning a lot I thought I should also start replying. May be I am a junior member here but not truly a junior member.
I have flashed more then 250 mobile of all brands. And thanks to XDA my success rate is 99.7 %
Thanks to XDA to making me local gadget guru. Now here every one believe that if even service center also fail to slove some software problems but at last kaushik will surly pass.
OK now let's see how to root.
(This will void your warranty)
(Phone will factory reset, which means all of the apps and data will be gone, not the internal sd)
(To root Lenovo K4 note you need to first unlock the bootloader. See below to know how to do it )
1. First download the two files from the links I have given.
All files needed to install twrp and root are in one zip file. Link is below.
https://mega.nz/#!D8MAwSzK!BYSzl4FGE_dbLy5wwzS0lbwSSNbelB7eMmfwdQjDoos
Usb ADB drivers for k4 note. Link below.
https://mega.nz/#!281yHDoI!iuIynHRqf8ui7IffStBhwrJvHJ4NBn1eExy_MYpr13o
Now to unlock bootloader.
2. Now in your mobile go to 'Settings' / 'About Device' / press 7 times on built number to unlock Developer options.
3. Now go to Developer options and click on 'OEM Unlocking' and press enable.
4. Next enable the USB debugging.
Your bootloader is now unlocked.
Now in PC extract the downloaded files
5. Install lenovo adb drivers ( it is in the link I have provided ) on your pc
6. Go to adb folder and press and hold shiftkey and right click with mouse. Select open command from here.
7. type adb reboot bootloader You need to authorize the pc if not done already. (The phone will boot onto fastboot, you can see small fastboot written on the left corner of the screen once the phone boots)
8. Now open adb folder and open 'unlock_bootloder'. A message will be displayed in mobile to press volume up key to continue. Press volume up key. A message in pc cmd will display as press any key to continue. Now press any key.
9. Now in cmd type fastboot flash recovery recovery.img
A message will be displayed as done.
Next part is very important
10. After its done press volume up and down button together with power button. Once you see the lenovo white screen, release the power button, release the volume keys once the screen goes black, wait for few minutes till you boot into the new custom recovery.
To avoid black screen set brightness below 30 in twrp settings. ( Not so important if don't understand how to do it )
11. Now the recovery allow modifications by just swiping and the goto mount and tick system and go back
12. Now go to advance, then file manager, then system, and delete the file named, recovery from boot.p ( if you are facing problem plz see point 14. )
13. After done do back and flash supersu.zip. (it is in the link which I have provided)
Now you phone is rooted and the supersu app will appear in the app drawer.
14. If you are facing problem with file manager flash aroma file manager ( it is in the link ). It will open in twrp. Now go to system and delete recovery from boot.p.
If you do not delete the said file again stock recovery will be replaced. If it happens so again you must repeat the steps from step 1.
Next to install xposed after boot up install xposed.apk (app is in the link)
Next flash xposed zip file. (Zip in the link )
Please don't forget to hit thanks if it helped you.
It will make me post more and help others.
Thanks
Regards
Kaushik.
Is this process safe??
HELP ! Fastboot doesn't recognize my device
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Paras1259 said:
Is this process safe??
Click to expand...
Click to collapse
Yes it's 100℅ safe bro. But how ever if you do any mistake I will not be responsible.
sujitmohanty2012 said:
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Click to expand...
Click to collapse
I Too have faced same problem. But I have installed all the drivers and it started working back to normal. So install the drivers which I have given in the link. Plz hit thanks if helpful. And plz make sure you have unlocked bootloader in developer options
Ongoli Koushik said:
I Too have faced same problem. But I have installed all the drivers and it started working back to normal. So install the drivers which I have given in the link. Plz hit thanks if helpful. And plz make sure you have unlocked bootloader in developer options
Click to expand...
Click to collapse
Thank you for the followup! I am surely gonna give this another go
What is the version of TWRP...
Sent from my Vibe K4 Note using XDA Labs
the internal memory is almost full after flashing twrp by this method.. any solution
the internal memory is almost full after flashing twrp by this method.. any solution plzz..
I am going to flash a new rom (6.0.1 ROM) ... So do I just flash Xposed??
anaynymous said:
I am going to flash a new rom (6.0.1 ROM) ... So do I just flash Xposed??
Click to expand...
Click to collapse
i have a7010a48 and after flash to S219_160810_row missing imei and Version of the radio module.How to fix it.
sujitmohanty2012 said:
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Click to expand...
Click to collapse
Bro you have to reset your lenovo vibe k4 note using spflash tool
bro, how to enter recovery mode for second time? i try press volume up+down+power, after white screen i release power button, after black screen i release all button, but nothing happend.. your tutorial fully working, i can install supersu.. plz help me..
salaminder said:
bro, how to enter recovery mode for second time? i try press volume up+down+power, after white screen i release power button, after black screen i release all button, but nothing happend.. your tutorial fully working, i can install supersu.. plz help me..
Click to expand...
Click to collapse
Check this . you will be able to know
https://www.youtube.com/watch?v=uF_F0G2eEhg
---------- Post added at 01:09 PM ---------- Previous post was at 01:09 PM ----------
udeshdhiman said:
Bro you have to reset your lenovo vibe k4 note using spflash tool
Click to expand...
Click to collapse
Why do I reset?
Is this ROM works for all ROW numbers?
Hi Koushik,
I have some questions,
Is this ROM works for all ROW numbers? present my device having s232 ROW.
Is this process will erase internal memory, coz i want to root my device to recover some files from internal memory.
Can you give me replay on this
Thanks.
My Phone Volume Down broken
Hi Bro.
My volume down button was broken, any alternate method
ask
does it work in android 5.0 s152?
stock recovery
please i need stock recovery lenovo a7010a48 s232
can i delete TWRP
alsa7er said:
please i need stock recovery lenovo a7010a48 s232[/QUOTE
Flash whole rom via sp flash tool
Click to expand...
Click to collapse
naandha114 said:
alsa7er said:
please i need stock recovery lenovo a7010a48 s232[/QUOTE
Flash whole rom via sp flash tool
Click to expand...
Click to collapse
ok thank you:good:
Click to expand...
Click to collapse
:crying: I was trying to root the phone with twrp in fastboot mode, but all of a sudden my pc shut down while still in fastboot twrp mode. and now my phone wont turn on. I cant boot into recovery, fastboot, no charge led, please guys help me.
Is it recognized when you plug it to your computer ?
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
it is recognized like qualocom 9008 usb bulk somethink like it, i dont remember, please help me and sorry for late reply I/m litterelly crying right now, please help me
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
My Pc recogonizes it as " Qualcomm HS-USBQDloader 9008 (COM10) "
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
mysa50 said:
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
Click to expand...
Click to collapse
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
vicky 1859 said:
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
Click to expand...
Click to collapse
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
mysa50 said:
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
Click to expand...
Click to collapse
Thank you, will try now, but will take some time to download the rom, will definitely update on the process once i tried it. i really appreciate your reply, hope this works. thanks once again.
a million thanks
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
I would first recommend you to download any Mi 5 Fastboot image from MIUI forums than install it in Fastboot mode (Hold Volume down+ Power button) through ADB or MIflash tool.
Afterwards recharge your phone fully and then proceed to install TWRp and custom ROM (provided you have unlocked bootloader)
vicky 1859 said:
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
Click to expand...
Click to collapse
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Sir Mohd said:
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Click to expand...
Click to collapse
http://en.miui.com/a-234.html
Guys I wanted to install custom roms in my Xiaomi mi 5 , therefore got my bootloader unlocked and installed twrp recovery through adb . After that , I wiped my miui ROM after taking its backup and tried flashing aoscp ROM , which didn't flash . Thereafter , I restored the previous ROM and now whenever I reboot , it gets stuck on the initial startup screen where Mi logo is there .
Kindly suggest on what to do next since this is very worrying issue for me . Regards
I tried installing crDroid (unlock bootloader, uploaded FW, recovery SHRP, then install ROM) and after reboot the phone would go back to recovery.
By mistake I "installed" SHRP from ZIP package (I thought I need to install latest recovery file to install ROM with android 12) and phone went into reboot loop, I can't do anything, any key combination doesn't help - I can't even turn it off.
help!
I opened the phone, disconnected the battery, but nothing happened - still bootloop
I'm planning to use SP Flash Tool
Immediately after connecting USB C, the phone boots into bootlop (after disconnecting and reconnecting the battery)
What happens when you flash the custom ROM?
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
U can also try to flash it with MI flash tool.
Sergij-SApcPro said:
What happens when you flash the custom ROM?
Click to expand...
Click to collapse
Operation completed with status [ ]. It looks like there should be a * in the middle and then it would be a sign to me that the ROM is loaded.
Sergij-SApcPro said:
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
Click to expand...
Click to collapse
At the time of writing, no key combination was working - I can't get into Fastboot or Recovery. I let the battery run out for that moment.
Sergij-SApcPro said:
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
Click to expand...
Click to collapse
Sergij-SApcPro said:
U can also try to flash it with MI flash tool.
Click to expand...
Click to collapse
That's what I'll do first, then move on to the solution below.
I opened the phone and disconnected the battery, but plugging in the USB cable immediately turns the phone on and bootloops again.
I'm using Linux and Windows, and one user hinted at hacking the USB driver so I believe it won't boot the phone, only then will I have communication? Other than that I don't know how to do it anyway.
For now, after the phone's battery runs out, I'll try with this solution
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
I've exhausted the battery, Mi Flash needs Fastboot, which I don't have.
I used
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
I got to the point of connecting the phone to the computer and it connects (the procedure says to use the Power button, but I had to disconnect the battery because Bootloop was falling in), using the Vol- button - the phone keeps connecting and disconnecting....
For a while I tried to connect the phone via SP Flash under Linux - in administrator mode the message "memory protection violation" appears (I don't know how the message is in English).
Adding a udev exception was supposed to help - after lsusb the Mediatek device appeared, I added the exception, restarted - and the same thing happens (the program crashes).
I finally managed (with the help of a group on telegram https://t.me/HelioG85_Unified) by switching off the phone and carefully going through all the points (except the update at the very end) from this link
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
There is a little problem, because SP Flash must be from the link in this post (because it will not fit DA)
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
Wow so many posts... Did you manage to fix the phone now? What do you mean by SP Flash will not fit the DA? Did you download the eng ROM for Lancelot? BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Sergij-SApcPro said:
Wow so many posts...
Click to expand...
Click to collapse
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Sergij-SApcPro said:
Did you manage to fix the phone now?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
What do you mean by SP Flash will not fit the DA?
Click to expand...
Click to collapse
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Sergij-SApcPro said:
Did you download the eng ROM for Lancelot?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Click to expand...
Click to collapse
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Great to hear that you fixed the phone, congratulations!
TomekParuszewski said:
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
Thanks for the info, but I don't need to flash it with SP Flash tool because that was earlier when I didn't try to install custom recovery. Now I have SHRP with CRDroid A12 and its Awesome.
Thanks for reading,
Bye
TomekParuszewski said:
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Yes
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Yes
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
SandShadow said:
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
Click to expand...
Click to collapse
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
voland34 said:
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
Click to expand...
Click to collapse
The battery trick does'nt work for me. I can't remember exact version, sorry - but my way was going BACK with SP Flash tool version (from newest to working with file). When I found right version the rest was only going with procedure.
I did it twice: first time I was scared, second - with finding right version of SPFT, every time - like walk in the park. Looong walk all procedure was like 2-3 hours.
Second one try was after trying to load Andorid 13 (2x). Don't do it kids!
After all, my Revolut app stop working lately on my phone and Redmi is retired for now... (and also becoming unusable because slowing dramatically)
Thanks for your answer. it has worked with battery empty (though that might not have benn necessary); not on 1st atttempt v5.2020 but it did with version 5v.2216 in case it might help someone...it didnt flash miui fastboot rom 12.5 but it did flash engineering rom. and from there i will twrp and miui.
Thanks for your suggestion of trying different spflash versions.
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today