Hello! I would like to show my first project for Samsung Galaxy Note 3 Neo N7505 and N750 . It's for all 4.4 KitKat Roms. This kernel is a big pack of optimizations and unlocked features. Let's see what's changed from stock kernel.
I wanted to created kernel providing power saving when browsing the internet and performance when you need to play games.
Features:
Compiled with SaberMod 4.8 Toolchain
Added ROW (default), ZEN and SIO I/O Schedulers
Added PowerSuspend module
Enabled 1400 and 1500 Mhz frequency for A7 cores (use TricksterMod for example to enable)
Enabled 667 Mhz GPU frequency (enabled by default)
Compiled with optimized flags
Enabled more Power Saving tweaks
Added Dynamic FSync (enabled by default)
Some I/O optimizations and tweaks
Replaced LED colors wth more natural and gentle RGB
Configurable LED RGB through /sys/class/sec/led/
Added and enabled UKSM (better version of KSM)
Init.d support
Readahead increased to 2048
What you need:
Samsung Galaxy Note 3 Neo N7505 or N750 with 4.4 firmware
Custom Recovery
Flashing:
Boot to TWRP or other recovery
Flash zip
Reboot system now!
Kernel was tested on Note 4 Mini Rom (N7505).
Download: http://artas182x.you2.pl/android-projects/experiencedkernel-samsung-galaxy-note-3-neo/
Changelog:
Added support for N750 variant - but it was untested. I recommend to test it on UniKat rom.
Tweaked filesystem mounts
Optimized some functions
Added less important tweaks
Fix for reseting WiFi password
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[KERNEL] [N7505] [N750-untested] ExperiencedKernel for Note 3 Neo, Kernel for the Samsung Galaxy Note 3 Neo
Contributors
artas182x
Source Code: http://github.com/artas182x
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.1
Beta Release Date: 2015-01-17
Created 2015-01-16
Last Updated 2015-01-17
That really good, I will try it... thank you for your work
So this kernel give us best performance or best battery or both?
---------- Post added at 10:32 AM ---------- Previous post was at 09:35 AM ----------
I flashed the kernel, after restart and when apps updating finish it's stuck on starting android.... I removed the battery then it's work..
I will test it till tomorrow and I will inform you if there anything.
artas182x said:
Hello! I would like to show my first project for Samsung Galaxy Note 3 Neo N7505. It’s for all 4.4 KitKat Roms. This kernel is a big pack of optimizations and unlocked features. Let’s see what’s changed from stock kernel.
I wanted to created kernel providing power saving when browsing the internet and performance when you need to play games.
Fetures:
Compiled with SaberMod 4.8 Toolchain
Added ROW (default), ZEN and SIO I/O Schedulers
Added PowerSuspend module
Enabled 1400 and 1500 Mhz frequency for A7 cores (use TricksterMod for example to enable)
Enabled 667 Mhz GPU frequency (enabled by default)
Compiled with optimized flags
Enabled more Power Saving tweaks
Added Dynamic FSync (enabled by default)
Some I/O optimizations and tweaks
Replaced LED colors wth more natural and gentle RGB
Configurable LED RGB through /sys/class/sec/led/
Added and enabled UKSM (better version of KSM)
Init.d support
Readahead increased to 2048
What you need:
Samsung Galaxy Note 3 Neo N7505 with 4.4 firmware
TWRP Recovery
Flashing:
Boot to TWRP
Flash zip
Reboot system now!
Kernel was tested on Note 4 Mini Rom
Download: http://artas182x.tk/android-projects/experiencedkernel-samsung-galaxy-note-3-neo/
XDA:DevDB Information
[KERNEL] [N7505] ExperiencedKernel for Samsung Galaxy Note 3 Neo, Kernel for the Samsung Galaxy Note 3 Neo
Contributors
artas182x
Source Code: http://github.com/artas182x
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-01-16
Created 2015-01-16
Last Updated 2015-01-16
Click to expand...
Click to collapse
Thank you very much! I use this kernel on note 4 mini v2
Only TWRP or also with CWM works?
---------- Post added at 10:51 AM ---------- Previous post was at 10:08 AM ----------
Zelota91 said:
Only TWRP or also with CWM works?
Click to expand...
Click to collapse
I try and for now works fine.
Antutu test score 42178! good job @artas182x !!
Any recovery should work. This kernel gives performance and battery life.
Zelota91 said:
Only TWRP or also with CWM works?
---------- Post added at 10:51 AM ---------- Previous post was at 10:08 AM ----------
I try and for now works fine.
Antutu test score 42178! good job @artas182x !!
Click to expand...
Click to collapse
artas182x said:
Any recovery should work. This kernel gives performance and battery life.
Click to expand...
Click to collapse
I think a found a bug: wifi password reset at each reboot! also on your phone?
No. It doesn't depend on kernel. Passwords are stored by system.
Zelota91 said:
I think a found a bug: wifi password reset at each reboot! also on your phone?
Click to expand...
Click to collapse
artas182x said:
No. It doesn't depend on kernel. Passwords are stored by system.
Click to expand...
Click to collapse
Also my Wifi PW reset after every restart
Muhammad Rihawi said:
Also my Wifi PW reset after every restart
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=2969162&d=1413151834
this is bulldog's fix
try it =) =) for me it worked
timuralaskara said:
http://forum.xda-developers.com/attachment.php?attachmentid=2969162&d=1413151834
this is bulldog's fix
try it =) =) for me it worked
Click to expand...
Click to collapse
Thanks it works
but it also change phone model and notification status bar color to Note4 like in bulldog Rom...
I hope Mr. artas182x can solved with next build.
timuralaskara said:
http://forum.xda-developers.com/attachment.php?attachmentid=2969162&d=1413151834
this is bulldog's fix
try it =) =) for me it worked
Click to expand...
Click to collapse
I have stock rom.
How can I fix it?
Zelota91 said:
I have stock rom.
How can I fix it?
Click to expand...
Click to collapse
Me also have stock Rom, just flash the file via recovery.
Muhammad Rihawi said:
Me also have stock Rom, just flash the file via recovery.
Click to expand...
Click to collapse
don't work for mine: can't reboot, stuck at samsung on the boot.
I restore a previous backup with philz.
Good job.
My antutu score increase but i have lost all WiFi pass and i can't overclock CPU because it freeze.
timuralaskara said:
http://forum.xda-developers.com/attachment.php?attachmentid=2969162&d=1413151834
this is bulldog's fix
try it =) =) for me it worked
Click to expand...
Click to collapse
Do you have note4mini or stock rom???
On mine stock rom doesn't work and phone doesn't boot.
Yorik87 said:
Good job.
My antutu score increase but i have lost all WiFi pass and i can't overclock CPU because it freeze.
Click to expand...
Click to collapse
Not all CPU are able to overclocking, that's why i disabled overclocking by default. With Note 4 Mini rom everything is ok, so i reccomend to use this rom, on stock just flash fix.
Thanks for first custom kernel for note 3 neo
@artas182x
Thanks for first custom kernel for note 3 neo :good::good:
please fix UPSM Grayscale mode for kernel
@bulldog74ts Ok, i didn't know about that. I will see it
Zelota91 said:
don't work for mine: can't reboot, stuck at samsung on the boot.
I restore a previous backup with philz.
Click to expand...
Click to collapse
Did you make wipe cach and wipe dalvic cach after flash the kernel?
Muhammad Rihawi said:
Did you make wipe cach and wipe dalvic cach after flash the kernel?
Click to expand...
Click to collapse
I wiped cache but note dalvkin cache.
Should it fix my problem?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
- Compiled with Linaro GCC 4.9-2015.03 thanks to christopher83
-frandom support
-Added optimized ARM RWSEM algorithm
-zram bringup
-added input touch boost from franco
-added cpu-boost
-added smartassv2 governer[more will may or may not be added]
-selinux fixes
-fixed memory leak on some places
-speed up FITRIM((more info)
-entropy tweaks
-varies optimizations for speed and stability
-using lz4 compression and decompression
-check my commits here
-using any kernel installer by kaush so compatible with all lollipop roms
CHANGELOG
-monster r1 bringup
DOWNLOAD
click here
INSTRUCTIONS
To install this KERNEL you will need to have a latest custom Recovery such as TWRP 2.8.6.0 or PhilZ installed
Copy the downloaded KERNEL.zip to your phone.
Boot into your recovery
FLASH THE KERNEL
XDA:DevDB Information
monster kernel, Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
coderdroid
Source Code: https://github.com/rishi1998/android_kernel_samsung_i9082
Kernel Special Features:
Version Information
Status: Stable
Created 2015-07-06
Last Updated 2015-07-31
Q: Will you add feature "X" to your kernel?
A: There is one chance that I add it to my kernel. simply post this question in the thread and if I find it usefull, I will implement it. Otherwise not.
Q: What are the best settings for a balanced using between battery saving and performance?
A: This settings are already the default ones. Because this default values are my personal settings, so this will be the best balance between power and battery .
Q: When is the next update coming?
A: As soon as possible. I am working really hard on bringing you a good update. That means also I have to test everything etc. I wont deliver you updates with big bugs! I better take my time and make everything working
mine
mine again
what are you looking at??
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Can I flash it on RR ROM?
Can I flash it on RR ROM?
FINALLY A KERNEL FOR OUR GRAND !
I'll download , test and will report after couple of hours
Thanks
---------- Post added at 07:35 AM ---------- Previous post was at 07:34 AM ----------
hemant4409 said:
Can I flash it on RR ROM?
Click to expand...
Click to collapse
Yes
compatible with all lollipop roms
Click to expand...
Click to collapse
thnQ bro and we will try it but i have a question i have RR and if the kernel is not completely with rom or i didn't like it how i can back to previous one that is included with rom !
and its better than the included with the rom ?
sry about my bad english :'(
Smooth ( using smartassV2 ) but doesn't have too much customization options
I mean Only 6 governor ( smartassV2 , performance , interactive , conservation , ondemand , powersave )
Overclocking limited to 1300
No new I/O Schedulers ( cqf , noop , row , deadline )
advantages: Z-RAM , UKMS
What suggested configuration?
Akash M. said:
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Click to expand...
Click to collapse
+1
Yousef Mohamed said:
Smooth ( using smartassV2 ) but doesn't have too much customization options
I mean Only 6 governor ( smartassV2 , performance , interactive , conservation , ondemand , powersave )
Overclocking limited to 1300
No new I/O Schedulers ( cqf , noop , row , deadline )
advantages: Z-RAM , UKMS
Click to expand...
Click to collapse
use kernel adiutor app to control the kernel
i will not going to add all that fancy stuff which might break the kernel in my stable releases(why anyone would use my kernel if it breaks things ) i have added the most stable stuff in this and for governers take this example i will add 15 to 16 goverers some is causing random reboots ,some heating up the device and some just behaves strangely so will you use my kernel for that? i am not saying i am not going to add the features,i am just saying i will add the feature which i think would be stable but still if you want that stuff i will make some experimental builds
Akash M. said:
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Click to expand...
Click to collapse
this thing breaks the kernel and cannot be called stable but still for you guys as you don't have this feature i will try to bring this to you (no promises as i don't know how it goes)
hemant4409 said:
Can I flash it on RR ROM?
Click to expand...
Click to collapse
yes
an0x said:
thnQ bro and we will try it but i have a question i have RR and if the kernel is not completely with rom or i didn't like it how i can back to previous one that is included with rom !
and its better than the included with the rom ?
sry about my bad english :'(
Click to expand...
Click to collapse
dirty flash the rom again
Please add swap ram support and GPU tweak
@coderdroid
Quick personal opinion, is it better to have standard CPU steps (350-600-800-1200...) or will it be an advantage to have more steps (300-400-500-600...), and how about under clocking, is it possible for our device? As I can't find any kernel did it,yet. Also the GPU tweaking, seems like mostly non doable on our device?
BTW, am dloading your kernel,will report if none did yet(any bugs or anything).
Osm kernel plz add swap support too
Sent from my GT-I9082 using XDA Forums PRO
HOW TO ?
hI,
Please help me I didn't find setting in CM 12.1 , please let me known where to find the kernal settings
Thanks in advance
Elvis
evilrulez said:
hI,
Please help me I didn't find setting in CM 12.1 , please let me known where to find the kernal settings
Thanks in advance
Elvis
Click to expand...
Click to collapse
Install Kernel Auditor app form the Play store
thanks
Yousef Mohamed said:
Install Kernel Auditor app form the Play store
Click to expand...
Click to collapse
thank you very much
Awesome and fastest kernel ever
coderdroid said:
this thing breaks the kernel and cannot be called stable but still for you guys as you don't have this feature i will try to bring this to you (no promises as i don't know how it goes)
Click to expand...
Click to collapse
Thnxx bro..and your kernel is too good...best kernel ever...and this enough for me that you will work on #DoubleTap2WakeUp:angel:...keep working for our grand... and now I'm really feel lucky that I'm having galaxy grand duos:fingers-crossed:
By flashing this kernel, you accept your fate.
This is my personal project, because of the lack of any custom kernels that had the features I want. So let me introduce myself. First of all, I'm noob in kernel developing. I've been using many great kernels on my Desire HD and Nexus 4. I've been hoping for such a kernel for our devices for the last 3 months but as it seems, more time is spent on cooking roms instead of kernel development. So well, here we are. I've been working on that for the last two weeks so, this is probably stable, but the alpha tag will stay at least till more people confirm that it works on different roms.
Initial kernel features:
Compiled with stock toolchain (for now)
Disabled software CRC + option to turn it on
Disabled fsync + option to turn it on
Fixes for high cpu load times, which can cause some governors to not work as they should
Disabled zram - with 2/3 GB of ram in our devices, we don't really need that.
Added Kernel Samepage Merging - off by default
Added FIOPS and SIO i/o schedulers
Added ZZmove and ElementalX cpu governors
Added toggle for Touch boost - you can now turn that off.
Added full KCAL display settings support.
Other optimizations
Safe roms confirmed to be working with the kernel
Official AICP - tested by me
Official RR - tested by @nexuspur (Huge thanks to you mate!)
AOSP+RRO - tested by @sheshuvadrevu
Official AOKP - tested by @DarkHero140
CM by banmeifyouwant - tested by @CodeBreaker13
DU - tested by @Windslash31 and @DarkHero140
Not safe roms
Mokee - giving bootloops
Santosh's CM13 - giving bootloops.
Flashing Instructions
Flash only if you're using CM based roms that follows the official CM device/kernel/proprietary repos! That kernel IS NOT FOR MIUI or AOSP Rom
Make backup of boot in twrp
Flash the kernel zip and reboot
About feature requests
I'm sure that many of you will ask for feature A B C. Please don't mention wake gestures as dt2w and swipe2wake, because I will NOT add them. To rework all the gestures for that is a massive job. Even if it was an easy commit to cherry-pick, I still wont add it, because this is battery drainer. We have FP sensor so use it, or wake the device with the power/volume buttons.
Everything else as request is welcomed, but not guaranteed that it will get in the kernel. Remember this is my project and I'll be adding only features that I find useful.
Downloads
KTO Kenzo Alpha4 (09-07-2016)
KTO Kenzo Stable 1.0 (11-07-2016)
KTO Kenzo Stable 1.1 (17-07-2016)
KTO Kenzo Stable 1.2 (21-07-2016)
KTO Kenzo Stable 1.3 (13-08-2016)
Recommended settings and app for tuning Kernel Adiutor-Mod
CPU
Governor: Alucard on both clusters
Touch boost: Off
Freqs: Little cores - 691-1440; Big cores - 400-1804
GPU
Don't touch it. Let Adreno idler do its job
Power and battery
Power suspend mode: Hybrid
I/O Scheduler
Scheduler: bfq
Read-ahead: 512kb
Add random: on
I/O stats: on
RQ Affinity: 1
KSM
KSM: Off
Entropy
Read: 192
Write: 384
Network
TCP congestion: Westwood
Android logging: Off
Software CRC: Off
Fsync: Off
XDA:DevDB Information
KTO Kenzo, Kernel for the Xiaomi Redmi Note 3
Contributors
ktomov, banmeifyouwant, TheStrix
Source Code: https://github.com/ktomov/android_kernel_xiaomi_msm8956
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-07-11
Created 2016-07-10
Last Updated 2016-07-11
Changelogs:
KTO Stable 1.0
Added adreno idler driver for lowering the GPU power usage
Added the following tcp congestion algorithms: veno, reno, bic, westwood, highspeed, hybla, htcp, vegas, scalable, lp, yeah, illinois (Cubic as default)
Some optimizations here and there
KTO Stable 1.1
Added Alucard and Darkness governors. They both perform well. I'm using Alucard which is tuned a bit.
Some vibration tunes
Changed the toolchain from google's default to @DespairFactor UberToolchain 4.9. Sadly I get bootloops after Miui logo with 5.X so can't even get a logcat. Will debug that in the future.
KTO Stable 1.2
Unlocked 1440MHz for a53 and 1804MHz for a72 cores freqs, just like on Xiaomi's original kernel. (Thanks for the tip @Umang96)
QC 2.0 is added - Haven't seen any change with the stock charger. Temperature is normal. Charging around 1600 mah.
Alucard - tuned one more time for the new freqs.
KTO Stable 1.3
Synched with latest CM sources, so we have new led driver and many bugfixes.
Added hardware CRC32 accelerator
Fixed -2/50% bug for people that had if before
Fixed the sudden 2% battery drop bug
Added power suspend driver
Remove the so called "qc 2.0" fast charging. To be fair, I haven't seen any improvement in charging time, but the batter was going hot. Charge your device overnight.
Some entropy tuning
Other patches for better memory speeds
Damn finally someone understands that dt2w is pointless on our device lol.thanks for another kernel.will flash on mokee and let you know?
Sent from my Redmi Note 3 using Tapatalk
Obviously we wait for working fingerprint of Goodix sensor
thx, try it
Thanks for the share @ktomov :highfive:
"First of all we are usung atmel touchscreen driver" Not true
check output from geteven -l and post ur screenshot here sir
picarito said:
Damn finally someone understands that dt2w is pointless on our device lol.thanks for another kernel.will flash on mokee and let you know?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Update: doesn't work with mokee.it boots and stays in mokee bootscreen and stays there.i wiped cache and dalvik before and after flashing kernel.oh well thanks for the kernel anyways.[emoji106]
Sent from my Redmi Note 3 using Tapatalk
Working on aosp too [emoji4]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi Note 3 using Tapatalk
Shahan_mik3 said:
"First of all we are usung atmel touchscreen driver" Not true
check output from geteven -l and post ur screenshot here sir
Click to expand...
Click to collapse
My mistake. It looks like I got focaltech. Guess I got confused with xiaomi's changes to the atmel folders in their kernel source
picarito said:
Update: doesn't work with mokee.it boots and stays in mokee bootscreen and stays there.i wiped cache and dalvik before and after flashing kernel.oh well thanks for the kernel anyways.[emoji106]
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Can you share what recovery are you using?
sheshuvadrevu said:
Working on aosp too [emoji4]
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info! Will add it in the first post
ktomov said:
My mistake. It looks like I got focaltech. Guess I got confused with xiaomi's changes to the atmel folders in their kernel source
Can you share what recovery are you using?
Thanks for the info! Will add it in the first post
Click to expand...
Click to collapse
what changes in alpha 4?
Plamb1r said:
what changes in alpha 4?
Click to expand...
Click to collapse
That's the initial version, so everything is in the first post. Alpha 1/2/3 were very early testing versions that @nexuspur tested for me on RR rom.
good luck my friend, hope you ll your best, i am testing right now your kernel, seems to be good
DarkHero140 said:
good luck my friend, hope you ll your best, i am testing right now your kernel, seems to be good
Click to expand...
Click to collapse
Can you mention on what rom are you using it? Thanks in advance!
ktomov said:
Can you mention on what rom are you using it? Thanks in advance!
Click to expand...
Click to collapse
i am on aokp rom) official one, but ater will flash dirty unicorns, dont like cyanogen based roms, they are getting laggy after some time, but aosp based roms still smooth even after 2-3 month))
DarkHero140 said:
i am on aokp rom) official one, but ater will flash dirty unicorns, dont like cyanogen based roms, they are getting laggy after some time, but aosp based roms still smooth even after 2-3 month))
Click to expand...
Click to collapse
The reason I'm asking, is so to know on which rom the kernel is working fine so I could add it on the first post. No one wants bootloops lol
ktomov said:
My mistake. It looks like I got focaltech. Guess I got confused with xiaomi's changes to the atmel folders in their kernel source
Can you share what recovery are you using?
Thanks for the info! Will add it in the first post
Click to expand...
Click to collapse
I'm using alka twrp recovery
Sent from my Redmi Note 3 using Tapatalk
ktomov said:
The reason I'm asking, is so to know on which rom the kernel is working fine so I could add it on the first post. No one wants bootloops lol
Click to expand...
Click to collapse
i understood already, it is okay
So far so good with cm from banmeifyouwant and TheStrix.
picarito said:
I'm using alka twrp recovery
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Guess Mokee have changed something :/ Too bad I can't see their sources
Hello all together, this is HydraKernel for Note 7 roms on the S7 Edge!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports Note 7 based roms form BPI4 and higher
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
If you want to take my work and need it somewhere, or do other things with it, ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
I release 2 different kernel versions here. One is for sony sensors, since they never have a problem, go for the *Mode* version, you got all working modes there but on sammy sensor you got washed out colors. So I made a second zip which has *Quality* in name, which has stock quality BUT not all camera modes are working. This works on: HydraRom, Sacs Rom, Renovate, everything else needs to be tested
Features of this Kernel:
- Build with latest sabermod Toolchain 7.0
- Build with BPI7 kernel source!
- F2FS compatible
- Choose kernel between quality or modes
- Latest Linux version 3.18.42, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative
- Built with latest ramdisk sources from samsung (BPH7)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, and SIOplus
- Fixed power efficient wq permission
- Critical TCP bug fixed
- Thermal drivers updated
- Selinux updates merged by google
- Zram LZ4 enabled
- Allow ADB-Insecure
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- All samsung related configs disabled (as knox, tima, restrict rooting)
- force encryption by samsung disabled!
Download:
V1.3 available on AndroidFilehost
Bugs/Problems:
- Camera with washed out colors or with not working modes (depends on your choice)
Instructions:
0. Make a full backup of your phone just in case!
1. Install a custom recovery for your phone, like this one here: TWRP
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your phone
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Now, flash your kernel you put onto the phone
6. Flash supersu, phh's root or xposed, just all things that modify your boot.img
7. Wipe cache and dalvik cache (recommand)
8. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- arter97
- Jesec for initial fingerprint patch method on s7
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
XDA:DevDB Information
HydraKernel for hero2lte, Kernel for the Samsung Galaxy S7 Edge
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/HydraKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.3
Stable Release Date: 2016-10-07
Created 2016-10-07
Last Updated 2016-10-20
Reserved
Reserved
Nice work bro :good: another addition to your list
running it on renovate rom, smooth and slick.
comera still sucks with samsung sensor.
tnx dev!!!
Game0vr said:
Nice work bro :good: another addition to your list
Click to expand...
Click to collapse
Thank you!
weedeater84 said:
running it on renovate rom, smooth and slick.
comera still sucks with samsung sensor.
tnx dev!!!
Click to expand...
Click to collapse
Thanks
You have chosen quality camera zip?
Tkkg1994 said:
Thank you!
Thanks
You have chosen quality camera zip?
Click to expand...
Click to collapse
i'm using flat, didnt see quality zip for 930, only 935
Here is a sample pic of the difference from stock Samsung camera quality to Luca's Hydra kernel quality zip
The top pic is Luca's fix and bottom stock Samsung
weedeater84 said:
i'm using flat, didnt see quality zip for 930, only 935
Click to expand...
Click to collapse
Why do you post in the edge thread instead of the flat one? Sure I don't have them here for s7
Game0vr said:
Here is a sample pic of the difference from stock Samsung camera quality to Luca's Hydra kernel quality zip
The top pic is Luca's fix and bottom stock Samsung
View attachment 3896921
Click to expand...
Click to collapse
Yeah it works pretty well
Small question, which cpu Governo do you think goes for the best battery saving in your kernel? (dont care about gaming)
However, Appreciate your great work! Thanks dear!
yamensati said:
Small question, which cpu Governo do you think goes for the best battery saving in your kernel? (dont care about gaming)
However, Appreciate your great work! Thanks dear!
Click to expand...
Click to collapse
Default one, interactive
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Default one, interactive
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
:good: thanks
One problem in quality kernel lagging in camera when taking picture. Is it possible to solve the problem.
saxena1 said:
One problem in quality kernel lagging in camera when taking picture. Is it possible to solve the problem.
Click to expand...
Click to collapse
Using s7 camera
Sent from my SuperMan powered SM-G930F
i have n issue since flashing last nite my phone has had 3 or 4 random reboots any idea why??
ruudbwoi said:
i have n issue since flashing last nite my phone has had 3 or 4 random reboots any idea why??
Click to expand...
Click to collapse
Which rom?
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Which rom?
Click to expand...
Click to collapse
jesec rom im now back using prometheus kernel which is i like it but i do prefer hydra kernel its snappier
ruudbwoi said:
jesec rom im now back using prometheus kernel which is i like it but i do prefer hydra kernel its snappier
Click to expand...
Click to collapse
Only confirmed working on, sac, renovate and hydra
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Only confirmed working on, sac, renovate and hydra
Click to expand...
Click to collapse
ah well that be why then lol shame i did like the kernel
can i use this ROM for snapdragon chip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Warning:
You will void your warranty if you flash this kernel.
Flash at your own risk, I won't be responsible if anything wrong happens to your device by flashing this.
This kernel is compatible with Vibe UI, CM13 and MIUI and to any other ROM which uses stock kernel. (Works flwlessly with stock ROM, can't guarantee about custom ROMs!)
Only for X3C50/X3C70 Variants!
This kernel is aimed to provide much more smoothness, better battery life and experience compared to stock.
Features:
Auto install BusyBox
FIOPS scheduler added and set as default
Optimized other stock schedulers for SSD's
SElinux set to "Permissive"
ZRAM disabled
Logd disabled
[*]FM Radio support
init.d support
Some miscellaneous tweaks, fix and patches to improve overall smoothness and battery life experience
KCAL post processing driver
USB Fast Charge
Features to come in next release:
Add CPU governors
Add some more hotplugs
Optimazations for better performance and battery life
Installation:
Unlock your bootloader.
Flash TWRP.
Download the zip.
Flash zip using TWRP.
Enjoy!!!!
Downloads:
V1.2.0: AFH Link
Older versions:
V1.1.0: AFH Link
V1.0.1: AFH Link
If you like my wok, you can help me by donating ,
Changelog:
V1.2.0:
Added Alucard hotplug
Disabled ZRAM
Added ElementalX governor and set it as default
[*]Enabled FM Radio
Dirty COW vulnerability patched
V1.1.0:
Enabled all TCP Congestion algorithms
Set BIC as default TCP congestion algorithm
Add BFQ, SIO and Zen I/O Scheduler
Set Zen I/O Scheduler as default
Fix no. of CPU cores, was set to 8 before.
Add Alucard hotplug
Optimazations for better performance and battery life
Now supports MIUI and CM as well
V1.0.1:
Added KCAL post processing driver
Added USB Fast Charge
V1.0.0:
Initial release
XDA:DevDB Information
Breeze Kernel for Vibe X3, Kernel for the Lenovo Vibe K4 Note
Contributors
aj20010319
Source Code: https://github.com/aj20010319/Breeze-MM-X3/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.2.0
Stable Release Date: 2016-12-02
Created 2016-10-23
Last Updated 2016-12-02
Reserved
THANKS & GREETINGS :
Chainfire
googy_anas
osm0sis
flar2
UpInTheAir
faux123
savoca
. . . and of course to all talented devs properly credited in my commits!
Reserved
Reserved
Where can i Find MIUI Custom rom for X3a40
Guys Can anyone Please provide MIUI Custom rom Link for Vibe X3(X3a40)
aj20010319 said:
Breeze Kernel
Warning:
You will void your warranty if you flash this kernel.
Flash at your own risk, I won't be responsible if anything wrong happens to your device by flashing this.
This kernel is compatible with Vibe UI, CM13 and MIUI and to any other ROM which uses stock kernel.
Only for X3C50/X3C70 Variants!I am pretty sure it will work with X3A40 as well, but haven't tested.[/CENTER]
This kernel is aimed to provide much more smoothness, better battery life and experience compared to stock.
Features:
Auto install BusyBox
FIOPS scheduler added and set as default
Optimized other stock schedulers for SSD's
SElinux set to "Permissive"
ZRAM disabled
Logd disabled
init.d support
Some miscellaneous tweaks, fix and patches to improve overall smoothness and battery life experience
KCAL post processing driver
USB Fast Charge
Features to come in next release:
More schedulers and governors
More tweaks for better performance and battery life
Installation:
Unlock your bootloader.
Flash TWRP.
Download the zip.
Flash zip using TWRP.
Enjoy!!!!
Downloads:
V1.0.1: AFH Link
If you like my wok, you can help me by donating ,
Changelog:
V1.0.1:
Added KCAL post processing driver
Added USB Fast Charge
V1.0.0:
Initial release
XDA:DevDB Information
Breeze Kernel for Vibe X3, Kernel for the Lenovo Vibe X3
Contributors
aj20010319
Source Code: https://github.com/aj20010319/Breeze-MM-X3/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0.1
Stable Release Date: 2016-10-25
Created 2016-10-23
Last Updated 2016-10-25
Click to expand...
Click to collapse
connect.tasleem said:
Guys Can anyone Please provide MIUI Custom rom Link for Vibe X3(X3a40)
Click to expand...
Click to collapse
First please do not quote whole OP, and second, this is not a thread for asking about other ROMs, if you have anything regarding this kernel ask it here.
[KERNEL][MM][10/13]Breeze Kernel for Vibe X3
i flash the zip with twrp getting error message its say 'meta inf not found'
KIRITI NANDI said:
i flash the zip with twrp getting error message its say 'meta inf not found'
Click to expand...
Click to collapse
Which one? 1.0.1 or 1.0.0?
Can We use this kernel on stock rom??
Can We use this kernel on stock rom??
connect.tasleem said:
Can We use this kernel on stock rom??
Click to expand...
Click to collapse
Yes, this works with stock ROM with no issues. It will work with any ROM which is based on stock but I don't know about CM, someone needs to test.
Wifi Module is Broken in X3a40
aj20010319 said:
Yes, this works with stock ROM with no issues. It will work with any ROM which is based on stock but I don't know about CM, someone needs to test.
Click to expand...
Click to collapse
Thanks aj20010319 i have tried this kernel on Lenovo VIbe X3 (X3a40) Wifi Module is broken. I tried my best way to turn on the wifi but still no use. Please Help Us.
vibex3user said:
Thanks aj20010319 i have tried this kernel on Lenovo VIbe X3 (X3a40) Wifi Module is broken. I tried my best way to turn on the wifi but still no use. Please Help Us.
Click to expand...
Click to collapse
Which ROM are you using? CM?
aj20010319 said:
Which ROM are you using? CM?
Click to expand...
Click to collapse
I am using Custom Stock Rom
http://forum.xda-developers.com/and...om-stock-rom-lenovo-vibe-x3-rowx3a40-t3402810
vibex3user said:
I am using Custom Stock Rom
http://forum.xda-developers.com/and...om-stock-rom-lenovo-vibe-x3-rowx3a40-t3402810
Click to expand...
Click to collapse
Okay, I will be releasing a newer version, maybe tomorrow, that should fix the issue.:fingers-crossed:
aj20010319 said:
Okay, I will be releasing a newer version, maybe tomorrow, that should fix the issue.:fingers-crossed:
Click to expand...
Click to collapse
Eagerly Waiting for it
aj20010319 said:
Okay, I will be releasing a newer version, maybe tomorrow, that should fix the issue.:fingers-crossed:
Click to expand...
Click to collapse
You can enable FM radio kernel, not avaialble motorola moto x style that has the same processor .Thanks
full. said:
You can enable FM radio kernel, not avaialble motorola moto x style that has the same processor .Thanks
Click to expand...
Click to collapse
I didn't understand, could you explain a bit more?
V1.1.0 is here!!
Changelog:
v1.1.0:
Enabled all TCP Congestion algorithms
Set BIC as default TCP congestion algorithm
Add BFQ, SIO and Zen I/O Scheduler
Set Zen I/O Scheduler as default
Fix no. of CPU cores, was set to 8 before.
Add Alucard hotplug
Optimazations for better performance and battery life
Now supports MIUI and CM as well
Download link is in OP.
vibex3user said:
Thanks aj20010319 i have tried this kernel on Lenovo VIbe X3 (X3a40) Wifi Module is broken. I tried my best way to turn on the wifi but still no use. Please Help Us.
Click to expand...
Click to collapse
X3a40 and X3c50/70 modems are different.
You can use each other's ROM as long as you use the correct modem firmware (NON-HLOS.bin file). I flashed S217 from X3a40 in my X3c50 but first replacing NON-HLOS.bin file with the one taken from X3c50 stock ROM.
If you flash the wrong NON-HLOS.bin file all wireless functionality is lost. No SIM recognition, no cell coverage, no WiFi, no bluetooth.
Whatever you do make sure you first backup you QCN.
iggarpe said:
X3a40 and X3c50/70 modems are different.
You can use each other's ROM as long as you use the correct modem firmware (NON-HLOS.bin file). I flashed S217 from X3a40 in my X3c50 but first replacing NON-HLOS.bin file with the one taken from X3c50 stock ROM.
If you flash the wrong NON-HLOS.bin file all wireless functionality is lost. No SIM recognition, no cell coverage, no WiFi, no bluetooth.
Whatever you do make sure you first backup you QCN.
Click to expand...
Click to collapse
But it's a kernel, it doesn't flash modem firmware and all that. @vibex3user , check if Wi-Fi is working in 1.1.0, if not, flash the custom ROM again and get me /system/lib/modules folder .
Kernel Not Working on stock rom :crying:
Awesome work @ aj20010319. We really need a Hard Core Developer like you.
and a Hard core tester like me (Just Kidding)
I tired this kernel on stock rom on Vibe X3 x3a40.. After flashing this kernel V1.1.0 phone is not booting
How to slove this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi XDA, here is my very first custom Kernel for the Galaxy S6 Edge +.
This project has long been my heart.
This kernel is stable and works very well, I am not yet a great kernel specialist but I learn every day to make it evolve and be able to make improvements, mod, patches etc ...
So please do not ask me to add this or that in my kernel this will happen naturally.
Now if you know what to talk to and want to help me to evolve my kernel, then your help is welcome
The kernel developer for version G928F, I am not responsible if you flasher it on another variant.
Sorry for the bad English ...
CHANGELOGS
Changelog Z.3.
Last updated source code MM
Fix wifi password and reception
cpu big cores: ability to UnderClock to 600Mhz and OverClock to 2.3Ghz
cpu little cores: Allow UnderClock to 300Mhz and OverClock to 1.7Ghz
Kernel Tweaks
Adding the Kernel Adiutor app to the kernel flash
Changelog Z.2.0
- Toolchain aarch64-linux-android-4.9-uber-master
- Last source code samsung G928FXXS3BPL7 6.0.1
- Enabled LZ4
- Deep Sleep fix
- Add gounerneur : POWERSAVE -- ONDEMAND -- CONSERVATIVE + default INTERACTIVE
- Set kernel to "permissive"
-Tweaks for speed
- Enabled Row
- Cleans and installs the latest busybox 1.26.2 Thanks @YashdSaraf
- Installs the latest SuperSu 2.79.SR3
Changelog Z.1.0
- Patch to Linux 3.10.61
- Little change closer to stock remains the best and most stable kernel
- Improved stability and reliability
- More fluid
- Better battery performance
- GOUVERNEURS = USERSPACE -- INTERACTIVE -- PERFORMANCE--
- SCHEDULER = NOOP -- CFQ --
- I/O Stats
- Add Random
- Entropie
- init.d support
- Insecure
- Remove dm-verity
- Remove forceencrypt
- Auto-Root SU 2.79 (crédits et remerciements @Chainfire)
Click to expand...
Click to collapse
Download kernel
Copy / paste on your smartphone.
Restart in Recovery mode and then flasher the kernel, as your phone reboots several times no worry is normal.
Finally enjoy ENJOY!
Any returns and welcome!
Click to expand...
Click to collapse
To manage your kernel use the applicationKernel Adiutor (ROOT)
EOS_Famous-KernelS6Edge+SuPraStOck-Z3.zip
MD5 : 6317ea4af2ab5856f06e8ec0dbd6e102
-Old Versions -
EOS_Famous-KernelS6Edge+SuPraStOck-Z.2.0.zip
MD5 :e6c95992d7b33afba2c22b2bb9dd19a0
@ Rohan459 For his Super Guide
@Tkkg1994 The only one to have answered the questions ask in pm, is i have many pm believe me lol
@Samsung For Kernel source
@The Sickness For his guide as well as some utility in his source
@Chainfire For root & SuperSU
@David 617 For Kernel Adiutor-Mod
XDA:DevDB Information
EOS F&Famous Kernel SuPraStOck, Kernel for the Samsung Galaxy S6 Edge+
Contributors
IZI.Xav
Source Code: https://github.com/IZIXAV/EOS-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Z.2.0
Stable Release Date: 2017-01-25
Created 2017-01-28
Last Updated 2017-02-03
Reserved
Thanks Mate! Gonna test your work this weekend with freshly flashed stock os. :good:
OK I'm waiting for your return
IZI.Xav said:
OK I'm waiting for your return
Click to expand...
Click to collapse
Kernel doesn't work on Sm-g928f using audax rom.
The phone restarts 3 times and reboots to recovery mode
this kernel work in note 7 port? Have support AOD (Always On Display)?
Matziatzu said:
Kernel doesn't work on Sm-g928f using audax rom.
The phone restarts 3 times and reboots to recovery mode
Click to expand...
Click to collapse
Hummm strange it has been tested on different rom and that on the model G928F
Diegocbv111 said:
this kernel work in note 7 port? Have support AOD (Always On Display)?
Click to expand...
Click to collapse
No not support Port Note 7
IZI.Xav said:
Hummm strange it has been tested on different rom and that on the model G928F
Click to expand...
Click to collapse
I switched to pure stock extra light rom, and with your kernel it is running smoothly, so I guess it's audax that's causing the problem.
Ok super, next update with the possibility of overclocking some adjustment and optimization
Great work! I use this kernel with a debloated stock firmware and xposed. So far everything works just fine, no bugs whatsoever and really good battery life. Can't wait to see this beauty evolve
Thanks bro!:good:
Great work but the WIFI connection is very slow and doesn't store the password
I'm using custom ROM
erni83 said:
Thanks bro!:good:
Great work but the WIFI connection is very slow and doesn't store the password
I'm using custom ROM
Click to expand...
Click to collapse
Thanks guy, Z3 in approach, problem wifi and passwords fix
Here with same error with wifi.. im waiting for v3
Enviado desde mi SM-G928F mediante Tapatalk
Update !
Hi guys Z3 is online see changelog.in Op
But 73 download for the Z2 is only 3 thanks it's not cool ..
IZI.Xav said:
Hi guys Z3 is online see changelog.in Op
But 73 download for the Z2 is only 3 thanks it's not cool ..
Click to expand...
Click to collapse
Many thanks ×73
Thanks a lot! Z3 works great, rock stable and fast. I underclocked it a bit for even better battery life
Would you consider to release also an unrooted version of the kernel? This way people could switch freely to their preferred superuser-app like phh' superuser.
Thank you guys, I look to do without the root included
Any chance got can make one for G928T, for T-Mobile variant? Thanks!
Sent from my SM-N920S using Tapatalk
Thanks for the great work! Very smooth and stable! It there a possibly in putting a kernel option for a enforcing or permissive setting? Thanks again for the hard work.
Sent from my SM-G928F using Tapatalk
v3 installed on my g928c s6 edge plus variant....absolutely fastest ihave ever tried....this is fastest kernel...but problem with battery deepsleep ..last night with wifi on it drop from 39 to 8 percent battery too much horible...plz suggest me some fix..i support u