Well I did something stupid, I was getting ready to give my phone to a friend and in my haste to make sure everything was deleted, I formatted /system in CWM recovery. I dont have any backups left on it either.
Now, I just need to flash a new rom, but I cant get my phone to connect to a computer in order to transfer the rom over.
It shows up immediately in Device Manager under Android USB Devices > My HTC, but it does not show up as a separate drive in My Computer.
Ive made sure the driver is up to date.
Anyone have any ideas?
culturistic said:
Well I did something stupid, I was getting ready to give my phone to a friend and in my haste to make sure everything was deleted, I formatted /system in CWM recovery. I dont have any backups left on it either.
Now, I just need to flash a new rom, but I cant get my phone to connect to a computer in order to transfer the rom over.
It shows up immediately in Device Manager under Android USB Devices > My HTC, but it does not show up as a separate drive in My Computer.
Ive made sure the driver is up to date.
Anyone have any ideas?
Click to expand...
Click to collapse
you cant connect your device to computer in MTP mode because you are not having any rom
try adb sideloading rom or adb push rom in custom recovery like TWRP or CWM (i used TWRP) in order to upload rom to sdcard
For Adb sideloading rom
> Reboot into TWRP
> in TWRP click "advanced" and navigate to "Sideload"
> Swipe to start Sideload
> now type "adb sideload romzip.zip"
wait until 100% then reboot back to recovery to flash the rom
If Adb sideload doesnt work..try Adb push
> Reboot into TWRP
> type "adb push rom.zip"
it might take sometime may be less than 5min to sideload or push the rom..dont cancel the command prompt after typing the above commands
Harish_Kumar said:
you cant connect your device to computer in MTP mode because you are not having any rom
try adb sideloading rom or adb push rom in custom recovery like TWRP or CWM (i used TWRP) in order to upload rom to sdcard
Click to expand...
Click to collapse
Awesome, thanks a million!
"Cyanogendmod.Org / Install CM for z3c / Unlock Your Xperia Z3 Compact" <--- That's the URL somehow.
Followed this instruction. Got myself the 12.1 .zip and .img.
I get error installaing the .zip and the .img isn't even an option:
The old rom is infinitly loading in that blue/purple wave line.
I then turn the phone off by holding down the power button until the phone restarts.
My history:
>Pressing up and down on the button rockers.
>Cyanogen Recovery starts.
>I choose "Wipe data/factory reset".
>I choose "Apply update".
(Apply from ADB doesn't work as it seems as ADB has no access for USB debugging. That's why install it from an external SD)
>Install "cm-12.1-20160918-NIGHTLY-z3c.zip" or its copy that I named "update.zip".
Error message:
[CAN'T POST PICTURE BECAUSE XDA HAS VERY FUNNY MEME RULES XDDD]
Private message maybe...? Can I send you guys URL pics via PM?
How can I get out of this loop?
If you want to go back to stock, use flashtool and flash whatever version you want (FTF method), I had an issue with flashing CM too, it said this is for aries but this device is z3c etc. Is this your problem?
marshalpear said:
If you want to go back to stock, use flashtool and flash whatever version you want (FTF method), I had an issue with flashing CM too, it said this is for aries but this device is z3c etc. Is this your problem?
Click to expand...
Click to collapse
I definitly want CyanogenMod 12.1 on my Z3C. Is it still possible?
I hope you can decypher the URL h t t p : / / t i n y u r l . c o m / j 6 4 u 8 u a
Few things you can do:
1- Download the ROM again, might be corrupted download.
2- Flash Lollipop FTF(not necessary), Flash TWRP recovery, boot into recovery, (If it asks, swipe to allow modifications to system), wipe everything (system,cache,dalvik,data), flash the ROM through TWRP recovery.
3- If it gives the error that I talked about in my first message, let me know.
marshalpear said:
Few things you can do:
1- Download the ROM again, might be corrupted download.
2- Flash Lollipop FTF(not necessary), Flash TWRP recovery, boot into recovery, (If it asks, swipe to allow modifications to system), wipe everything (system,cache,dalvik,data), flash the ROM through TWRP recovery.
3- If it gives the error that I talked about in my first message, let me know.
Click to expand...
Click to collapse
I tried #1 but I'm already stuck with the "SONY XPERIA" blackscreen at the very beginning when booting the smartphone. I suppose it's because of the failed installation and the not choosing of "Wipe clean/factory reset".
I hope that still doesn't count as bricking. I let the accumulator run dry and reload the battery and try to get into the Cyanogenmod Recovery again. Right now nothing is possible. =/
I hope that doesn't count as bricking. If so: These special OTG USB thingies fix a lot I heard, should I get myself one?
SYLVER SECOND said:
I tried #1 but I'm already stuck with the "SONY XPERIA" blackscreen at the very beginning when booting the smartphone. I suppose it's because of the failed installation and the not choosing of "Wipe clean/factory reset".
I hope that still doesn't count as bricking. I let the accumulator run dry and reload the battery and try to get into the Cyanogenmod Recovery again. Right now nothing is possible. =/
I hope that doesn't count as bricking. If so: These special OTG USB thingies fix a lot I heard, should I get myself one?
Click to expand...
Click to collapse
If you are on CM recovery, then there is the problem. AFAIK you can't flash anything through that, so you have to push TWRP on your device using fastboot and then flash AOSP/CM rom you want.
SYLVER SECOND said:
I tried #1 but I'm already stuck with the "SONY XPERIA" blackscreen at the very beginning when booting the smartphone. I suppose it's because of the failed installation and the not choosing of "Wipe clean/factory reset".
I hope that still doesn't count as bricking. I let the accumulator run dry and reload the battery and try to get into the Cyanogenmod Recovery again. Right now nothing is possible. =/
I hope that doesn't count as bricking. If so: These special OTG USB thingies fix a lot I heard, should I get myself one?
Click to expand...
Click to collapse
That's called a soft-brick. You should install the ADB drivers for your phone on your PC and then download TWRP for your phone (.img file) and rename the TWRP you downloaded to recovery.img .
You should put the recovery.img into the folder where your ADB drivers are installed, then Shift + RClick on that folder then select Open Command Window Here. Connect your phone in fastboot mode to your PC (Keep Vol. Up button then plug in your device). Type the following commands:
fastboot flash boot recovery.img
fastboot reboot
If you've done it all correctly, your phone should boot into TWRP recovery. From there you should go to wipe-advanced wipe and wipe your Cache,Dalvik Cache, System, Boot. DO NOT REBOOT NOW. You should go back to main menu and choose install, then choose the ROM you want to install. It should flash it if you don't have a corrupted file. After flashing, you can safely reboot your phone, don't forget to flash GApps if you want Google features on your Cyanogen, hope I helped!
More info about my error:
h t t p : / / t i n y u r l . c o m / z b e v y u 2
Each version of step #3 doesn't work. Still trying to figure out how to get TWRP...
marshalpear said:
That's called a soft-brick. You should install the ADB drivers for your phone on your PC and then download TWRP for your phone (.img file) and rename the TWRP you downloaded to recovery.img .
You should put the recovery.img into the folder where your ADB drivers are installed, then Shift + RClick on that folder then select Open Command Window Here. Connect your phone in fastboot mode to your PC (Keep Vol. Up button then plug in your device). Type the following commands:
fastboot flash boot recovery.img
fastboot reboot
If you've done it all correctly, your phone should boot into TWRP recovery. From there you should go to wipe-advanced wipe and wipe your Cache,Dalvik Cache, System, Boot. DO NOT REBOOT NOW. You should go back to main menu and choose install, then choose the ROM you want to install. It should flash it if you don't have a corrupted file. After flashing, you can safely reboot your phone, don't forget to flash GApps if you want Google features on your Cyanogen, hope I helped!
Click to expand...
Click to collapse
K, 90% of this works. I got the TWRP "app" and I cleaned the cache and all that, but I had to reboot. You see:
To transfer new media I need to remove my external SD from the z3c to my old LG. The LG is connected with my PC and is therefore a kind of card-reader. I tried 2 different nightly thingies.
I still get extraction errors, see:
h t t p : / / t i n y u r l . c o m / h j j d 4 o b
I downloaded 2 different nightlies 6 times already. I dunno. Somethings off here.
Also: For what is the recovery.img? Should I install it afterwards?
I have to restart the phone in order to replug the SD card and get recognigzed by the TWRP.
I did everything from this:
http://forum.xda-developers.com/showthread.php?t=2522762
Because of Error 7.
Now I get Error 6.....
SYLVER SECOND said:
K, 90% of this works. I got the TWRP "app" and I cleaned the cache and all that, but I had to reboot. You see:
To transfer new media I need to remove my external SD from the z3c to my old LG. The LG is connected with my PC and is therefore a kind of card-reader. I tried 2 different nightly thingies.
I still get extraction errors, see:
h t t p : / / t i n y u r l . c o m / h j j d 4 o b
I downloaded 2 different nightlies 6 times already. I dunno. Somethings off here.
Also: For what is the recovery.img? Should I install it afterwards?
I have to restart the phone in order to replug the SD card and get recognigzed by the TWRP.
I did everything from this:
http://forum.xda-developers.com/showthread.php?t=2522762
Because of Error 7.
Now I get Error 6.....
Click to expand...
Click to collapse
OK, your problem is that you messed up your system, so wiping it is not gonna solve this issue. You need to download a stock firmware file (an FTF file) and flash it through Flashtool, because your device name seems to be "." which is why you were getting "error 7". As for the recovery.img, you will use it to flash TWRP recovery on your phone. TWRP app doesn't work correctly if you don't flash it to your recovery partition so do as follows:
1- Download Flashtool, install the drivers of your device for Flashtool (you can search it on xda forums), download an FTF file, any of them should do, but as you will install CM 12.1, I recommend a Lollipop FTF.
2- Flash the firmware through Flashtool. This will turn your phone into a stock one. Unlock your bootloader if you haven't already, which I believe you have.
3- Flash the TWRP recovery through fastboot (follow my earlier instructions)
4- After you open TWRP recovery do the wipes, note that you can still connect your phone to your computer for file transfers in TWRP Recovery.
5- Install the CM zip file through recovery
IF YOU GET ERROR 7 SAYING :this package is for device: D5803, D5833, z3c; this device is aries.
7- Open the CM 12.1 zip file on your computer and proceed to META-INF/com/google/android directory.
8- In that folder you should see "updater-script", extract it to somewhere and open it with Notepad.
9- Once you open it press Ctrl + H to change some of the lines.
10- Write "D5833" without the quotation marks in the first space and write "aries" without the quotation marks into the second space and click replace all.
(This will change all "D5833" to "aries" in the file therefore making it usable for your device) Save the file and put it into the directory of where you found it, replace it with the original.
11- Now put the edited .zip file into your phone storage, and flash it through recovery. It should work. :good:
marshalpear said:
3- Flash the TWRP recovery through fastboot (follow my earlier instructions)
Click to expand...
Click to collapse
I think he shouldn't flash TWRP on boot partition, as you wrote. That might cause further issues. I am flashing my recovery through fastboot without problems using next command:
fastboot flash recovery recovery.img
Cirra92 said:
I think he shouldn't flash TWRP on boot partition, as you wrote. That might cause further issues. I am flashing my recovery through fastboot without problems using next command:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
It won't matter. Because when he flashes the CM, it'll flash the CM Recovery along with it.
marshalpear said:
It won't matter. Because when he flashes the CM, it'll flash the CM Recovery along with it.
Click to expand...
Click to collapse
Yea I know, but before that, he needs to have a working TWRP on right partition to be able to even flash any rom.
Cirra92 said:
Yea I know, but before that, he needs to have a working TWRP on right partition to be able to even flash any rom.
Click to expand...
Click to collapse
That's why I wrote those steps for him/her to follow. If you flash TWRP to boot partition, when you boot the phone, it will go straight into TWRP. If you flash it to recovery partition, you'll have to boot it manually.
marshalpear said:
That's why I wrote those steps for him/her to follow. If you flash TWRP to boot partition, when you boot the phone, it will go straight into TWRP. If you flash it to recovery partition, you'll have to boot it manually.
Click to expand...
Click to collapse
Logical step, didn't think about it that way, I assumed OP knew how to enter recovery
"1- Download Flashtool, install the drivers of your device for Flashtool (you can search it on xda forums), download an FTF file, any of them should do, but as you will install CM 12.1, I recommend a Lollipop FTF.
2- Flash the firmware through Flashtool. This will turn your phone into a stock one. Unlock your bootloader if you haven't already, which I believe you have.
3- Flash the TWRP recovery through fastboot (follow my earlier instructions)
4- After you open TWRP recovery do the wipes, note that you can still connect your phone to your computer for file transfers in TWRP Recovery.
5- Install the CM zip file through recovery
IF YOU GET ERROR 7 SAYING :this package is for device: D5803, D5833, z3c; this device is aries.
7- Open the CM 12.1 zip file on your computer and proceed to META-INF/com/google/android directory.
8- In that folder you should see "updater-script", extract it to somewhere and open it with Notepad.
9- Once you open it press Ctrl + H to change some of the lines.
10- Write "D5833" without the quotation marks in the first space and write "aries" without the quotation marks into the second space and click replace all.
(This will change all "D5833" to "aries" in the file therefore making it usable for your device) Save the file and put it into the directory of where you found it, replace it with the original.
11- Now put the edited .zip file into your phone storage, and flash it through recovery. It should work."
K, so I guess I'm finished with #1 and #2. Sorry, had a ****-ton of chores to do. Before I progress, I wanted to send you guys
this pic:
https://img3.picload.org/image/rdricord/unbenannt.png
Is the root access necessary, or can I progress?
That's the sites I've used, if anybody wonders why something is the way it is right now:
http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
http://forum.xda-developers.com/showpost.php?p=66275965&postcount=2029
http://forum.xda-developers.com/showpost.php?p=60001557&postcount=829
Von "Sony Mobile Flasher by Androxyde":
"23/023/2016 22:23:52 - INFO - Root access denied
23/024/2016 22:24:07 - ERROR - Illegal key size or default parameters
23/024/2016 22:24:12 - ERROR - Illegal key size or default parameters
23/024/2016 22:24:13 - WARN - Please check your Phone and 'ALLOW' Superuseraccess!
23/024/2016 22:24:14 - INFO - Root access denied"
FlashTool says the firmware has been flashed so I don't understand what are you trying to do after that? After flashing the FTF file you should flash TWRP through "FASTBOOT". Then follow the instructions.
K, did everything you said. Read everything five-times. Replaced "D5833" to "aries" and all that stuff. Still getting ERROR 7.
The phone is still in TWRP Recovery from FASTBOOT / BOOTLOAD because I "constantly" charge it to stay in recovery. If I had found this Mount option earlier... kinda feel stupid for that. So I still get ERROR 7. I copied the modified .zip to internal storage and SD card to see if I get the same error twice. And yeah.
Exact error message in red letters:
"Updater process ended with ERROR: 7
Error installing zip file ' /external-sd/cm-12.1-20160918-NIGHTLY-z3c.zip'
Updating partition details...
... done"
So I forethought and cleaned the cache and need somewhat new instructions.
Also:
I suppose with "Advanced Wipe" and your instructions you meant this points, right?:
http://tinyurl.com/jc5rv3a
SYLVER SECOND said:
K, did everything you said. Read everything five-times. Replaced "D5833" to "aries" and all that stuff. Still getting ERROR 7.
The phone is still in TWRP Recovery from FASTBOOT / BOOTLOAD because I "constantly" charge it to stay in recovery. If I had found this Mount option earlier... kinda feel stupid for that. So I still get ERROR 7. I copied the modified .zip to internal storage and SD card to see if I get the same error twice. And yeah.
Exact error message in red letters:
"Updater process ended with ERROR: 7
Error installing zip file ' /external-sd/cm-12.1-20160918-NIGHTLY-z3c.zip'
Updating partition details...
... done"
So I forethought and cleaned the cache and need somewhat new instructions.
Also:
I suppose with "Advanced Wipe" and your instructions you meant this points, right?:
http://tinyurl.com/jc5rv3a
Click to expand...
Click to collapse
OK, so try flashing TWRP to recovery partition to get you out of TWRP after you boot by writing these commands in the ADB:,
fastboot flash recovery recovery.img
fastboot reboot recovery
This will flash the TWRP to recovery partition and will boot you into TWRP. As you do this you won't have a go at the recovery again but for this time. You can reach the TWRP by pressing the Vol. Down button when the phone vibrates at the boot. Also if you want to force shutdown your phone you can use Vol. Up + Power Button combination for a few secs.
marshalpear said:
OK, so try flashing TWRP to recovery partition to get you out of TWRP after you boot by writing these commands in the ADB:,
fastboot flash recovery recovery.img
fastboot reboot recovery
This will flash the TWRP to recovery partition and will boot you into TWRP. As you do this you won't have a go at the recovery again but for this time. You can reach the TWRP by pressing the Vol. Down button when the phone vibrates at the boot. Also if you want to force shutdown your phone you can use Vol. Up + Power Button combination for a few secs.
Click to expand...
Click to collapse
K, cool feature. Got it all set up now, but back to the main subject:
Is it even possible to install CyanogenMod 12.1 on Sony Z3C?
One of my N6s has a little trouble doing ADB.
When it's in stock, the phone will only accept ADB commands and show up in ADB Devices when the USB mode is set to MIDI. It doesn't work with ADB in MTP mode. But in MTP mode, I can drop files to the phone from Windows File Manager, but no ADB. In TWRP recovery mode, with MTP on I can't drop files to the phone. In TWRP, if I disable MTP, the phone no longer shows up in Windows. That's the background on this phone.
I'm trying to flash Pure Nexus, GApps, Magisk, and Franco Kernel to this phone without encrypting it.
As a starter step, I have flashed stock and TWRP to it without rebooting to the stock ROM (which would encrypt the phone).
(Note I know many people say encryption doesn't matter for better performance. Let's not get distracted by that discussion here. I'm trying to see if I can flash this custom setup without encrypting.)
I now need to get the Zips for PN, GApps, Magisk, and Franco onto the phone but am unable to use adb push command or Windows File Manager to drop those files.
So it has fresh stock and TWRP on it. Now when the phone is in TWRP, and I try to "adb push ROM.zip" I get an error: failed to get feature set: no devices/emulators found If I try adb devices it returns a blank list.
So while TWRP is on the phone i don't know other ways to push the Zips over to a folder on the phone.
In Windows File Manager I can see the device Nexus 6 and inside of that is Internal Storage. If I try to drop files to Internal Storage using Windows, it processes for a long time and hangs.
In Windows File Manager I cannot create a new folder on the phone when it's in TWRP mode.
In TWRP, Mount, the default boxes checked are Data and Cache. Others aren't checked.
Is there some other trick to getting those Zips onto the phone without booting the phone into Stock, thus encrypting the data? Thanks
wittier said:
One of my N6s has a little trouble doing ADB.
When it's in stock, the phone will only accept ADB commands and show up in ADB Devices when the USB mode is set to MIDI. It doesn't work with ADB in MTP mode. But in MTP mode, I can drop files to the phone from Windows File Manager, but no ADB. In TWRP recovery mode, with MTP on I can't drop files to the phone. In TWRP, if I disable MTP, the phone no longer shows up in Windows. That's the background on this phone.
I'm trying to flash Pure Nexus, GApps, Magisk, and Franco Kernel to this phone without encrypting it.
As a starter step, I have flashed stock and TWRP to it without rebooting to the stock ROM (which would encrypt the phone).
(Note I know many people say encryption doesn't matter for better performance. Let's not get distracted by that discussion here. I'm trying to see if I can flash this custom setup without encrypting.)
I now need to get the Zips for PN, GApps, Magisk, and Franco onto the phone but am unable to use adb push command or Windows File Manager to drop those files.
So it has fresh stock and TWRP on it. Now when the phone is in TWRP, and I try to "adb push ROM.zip" I get an error: failed to get feature set: no devices/emulators found If I try adb devices it returns a blank list.
So while TWRP is on the phone i don't know other ways to push the Zips over to a folder on the phone.
In Windows File Manager I can see the device Nexus 6 and inside of that is Internal Storage. If I try to drop files to Internal Storage using Windows, it processes for a long time and hangs.
In Windows File Manager I cannot create a new folder on the phone when it's in TWRP mode.
In TWRP, Mount, the default boxes checked are Data and Cache. Others aren't checked.
Is there some other trick to getting those Zips onto the phone without booting the phone into Stock, thus encrypting the data? Thanks
Click to expand...
Click to collapse
SUCCESS
Update: with some manipulation in TWRP, I was able to get a file system I could see and drop files to from Windows.
After flashing stock, and TWRP, and booting to TWRP (without ever booting to system/stock, which would have encrypted phone) i did the following.
I'm trying to remember all the steps but I think that Wiping the data and cache partitions via TWRP was the key, and required before I could move zips over to the phone.
I dropped the Pure Nexus, GApps, and Magisk onto the phone and then flashed them in that order via TWRP
Rebooted to system.
It installed and set up under Pure Nexus. It's reloading my apps from my Google account.
I checked Settings, Security and the phone is not encrypted.
I haven't yet checked on the GApps and Magisk. I assume I can install Franco Kernel from the Franco Manager app that I bought.
When you can't transfer files from PC to the N6:
Remove the drivers of the PC and let Windows search for the latest drivers.
Check on https://dl.twrp.me if you have the latest version of TWRP.
NLBeev said:
When you can't transfer files from PC to the N6:
Remove the drivers of the PC and let Windows search for the latest drivers.
Check on https://dl.twrp.me if you have the latest version of TWRP.
Click to expand...
Click to collapse
thanks. it is the latest TWRP.
I fixed it, see above, it wasn't the drivers on the PC.
The PC works with my other N6. This N6 has issues.
The workaround of wiping in TWRP fixed it. I don't know yet if I'd have to do the same wipe with my better N6. Will find out soon.
wittier said:
... I don't know yet if I'd have to do the same wipe with my better N6. Will find out soon.
Click to expand...
Click to collapse
Updating TWRP to the latest version is a good practice.
wittier said:
SUCCESS
Update: with some manipulation in TWRP, I was able to get a file system I could see and drop files to from Windows.
After flashing stock, and TWRP, and booting to TWRP (without ever booting to system/stock, which would have encrypted phone) i did the following.
I'm trying to remember all the steps but I think that Wiping the data and cache partitions via TWRP was the key, and required before I could move zips over to the phone.
I dropped the Pure Nexus, GApps, and Magisk onto the phone and then flashed them in that order via TWRP
Rebooted to system.
It installed and set up under Pure Nexus. It's reloading my apps from my Google account.
I checked Settings, Security and the phone is not encrypted.
I haven't yet checked on the GApps and Magisk. I assume I can install Franco Kernel from the Franco Manager app that I bought.
Click to expand...
Click to collapse
I updated my other N6 last night.
After flashing stock ROM and TWRP and booting to TWRP only, I didn't have to wipe before I could push files to the phone.
The other phone is more difficult.