Database Develop

[ROOT][HOW TO]Redmi 2 MIUI 7 Easy Root method via recovery!!!

If you dont know you can install the MIUI 7 on your phone by clicking on this link: http://en.miui.com/thread-149081-1-1.html
There is a full description on how to install MIUI 7 on your Redmi 2...
This method can successfully Root your Redmi 2 running MIUI7...
Steps are as follows:
1)Install TWRP recovery(I used TWRP myself so I dont know totally that any other recovery will work or not..you can yourself comment here if it does)
2)Download the attached file into the phone.
3)You can search the Miforum or xda to flash the proper version of the TWRP recovery for Redmi 2.
4)After successfully flashing TWRP go to Recovery using Vol up+power button and then selecting Recovery
5)Inside the recovery go to install and select the path where you have downloaded the attached file.
6)Install the zip(It will take about 1-2 minutes)...CONGRATS...Your device is successfully rooted...!!Enjoy Root access...
**If you are prompted to update the binary update it...Select TWRP/CWM method when prompted...
Sometimes it may happen that you dont get root access with this method...For this you have to factory reset your phone and again reinstall the MIUI7 rom via recovery flashable zip...You can search the MIUI forums for the same...
P.S:The TWRP can be used to install weekly OTA updates as well so no need to care for the Stock recovery even after you flash the TWRP recovery.Although after the OTA update your device will go back to stock Mi recovery but you can reflash twrp using Flashify app if you need it...(Available on the store)
***"I am NOT RESPONSIBLE if doing this Bricks your phone or causes any other type of harm...I am sharing something that I found while experimenting..!!"***
I used MIUI 7 ver.5.8.22 and ver 5.8.28 during this process..!!
If it works please credit me!!Thanks...!!

Good one.
Do you really think you need to write this this partial guide here?
I mean there is lot (on XDA) guide where you can find a complete guide.
Keep things easy.

Downgrade OxygenOS from 3.5.2 to 3.2.6 with Root / Xposed / Debloat

So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone

Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?

darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
You're welcome.
Unfortunately, I can't provide guides for procedures I never went through.
But I asume that you could just flash any Custom ROM after you completely wiped your phone in step 4. So instead of flashing OOS 3.2.6 afterwards, just flash a custom ROM. Be sure that you have all zips you need on your internal storage and a backup to revert back to, if anything goes wrong. Otherwise you will have to use ADB sideload to install a ROM.

Ok, so I have a Modified TWRP installed already. Question is If I want to flash other ROMS after wiping system,dalvik/cache,data etc. Do I have to Flash official TWRP first followed by firmware,ROM, etc?
or firmware first then ROM and lastly official TWRP?
it's quite confusing.

I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life

gigeaky said:
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
Click to expand...
Click to collapse
Flash modified TWRP, and the recovery will return. then, follow the guide. it happened to me too.

darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
First flash modified TWRP than install official 3.2.4 than flash CM ROM or custom ROM

uniQ191 said:
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Click to expand...
Click to collapse
worked like magic. Thankyou for this education. it didnt work when i followed other folks. Much appreciated.

So it seems I have booted with 3.5.2 and modified recovery. Now my question is: can I reboot in recovery at step 7 and install the original twrp recovery? Or can I use flashify? As I don't have access to a pc

I did ok but cant use adaway do you have a fix for it?
Enviado do meu ONEPLUS A3003 através de Tapatalk

I'm trying to return to 3.2.6 after trying 3.5.2.
However, after flashing and booting 3.2.6, I boot into fastboot mode and the official TWRP refuses to flash. It reports that it's failed and then I'm left with no recovery until I reflash the modified TWRP.
I could try restoring my Nandroid backup of 3.2.6 with the modified TWRP, but I'd prefer to return to the official TWRP before doing this.
Any suggestions?
Edit: Fixed it. I downloaded the official TWRP again and it flashed. The first download must have been corrupted.

I followed a different method and successfully downgraded today to a former nandroid. I was rooted without xposed.
3.2.6 to 3.5.2 dirty flash
- installed modded twrp
- performed backup on 3.2.6
- installed modded 3.5.2 (the only that flashes in twrp)
- installed root SR1
- wiped caches only
- reboot
3.5.2 to 3.2.6 restore
- downloaded 3.2.6
- boot to modded twrp, wipe both caches, data, system
- flashed 3.2.6 stock and root SR1
- restored 3.2.6
- wiped caches
- reboot
- enjoying my LTE again
Without first installing stock, after a restore my phone was boot locking right after the oneplus white logo (capacitive buttons would light up, but it would not boot to red logo). Had to press vol down and power to force it to boot menu to select recovery and get back to twrp
Hope this helps someone, it's a bit easier than swapping twrps and no need to boot up/flash 3.2.x twice.

So if I am on the CB and want to go back to 3.2.6
I can flash 3.2.6 with the modded TWRP
Then flash Official TWRP and boot?

If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss

popab said:
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
Click to expand...
Click to collapse
i would also like to know this please

bigup7 said:
i would also like to know this please
Click to expand...
Click to collapse
I did it and it does work perfectly. Just make sure to wipe data from recovery after flashing.

I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.

null0seven said:
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
Click to expand...
Click to collapse
I am on CB Freddom os
I want to go back either to stock or to op3lite.
I cant reboot to recovery.
But adb works yet.
What to do plz suggest.
Sent from my ONEPLUS A3003 using Tapatalk

1. If system don't boot. Reboot to fastboot.
- Flash recovery.img. If PC don't see youre phone option 2.
2. If system boots, open phone like normal.
- Extract recovery img. Put it on the TWRP file on phone sd card.
- Download Flashify from play. Open it, flash img of recovery. Open recovery to chech if it works.
Try with both recovery (3.0.2.0 or modified 3.0.2.-19). One of those will work.

Im getting system partition has unexpected contents after OTA update after installing step 5 ????

Unable to update to MIUI 9

Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.

steve.24 said:
Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
Click to expand...
Click to collapse
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable

reversegear said:
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
Click to expand...
Click to collapse
I'll give it a try. Currently I have data wiped and installed full ROM through fastboot method. So next time, for sure I'll give it a shot.
But I have a doubt, where TWRP be able to flash an MIUI ROM. I mean the bootloader unlocked, encrypted system partition and all.

Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.

scholastova said:
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
Click to expand...
Click to collapse
Can you give stock recovery from mi max 2? I forgot to back up his original recovery stock and was hit with twrp.

Phone unable to flash custom rom ! help

After unlocked bootloader i installed twrp for installing for custom rom.
I follow all steps of flashing custom rom , gapps n all that from rom threads ,even by watching tutorial , it flashed properly showing in recovery ..but when i reboot to system phone stuck on mi logo.
i tried rom like Rr, dotos, coltos, lineage. But getting nothing.
Help me !!
Current using redmi 4x betarom

If you had followed the instructions on the XDA threads like you say then you must've been able to have a successful flash.
For flashing custom ROM:
1)Unlock Bootloader
2)Flash TWRP
3)Copy your downloaded ROM and Gapps zip to Internal storage OR SD card.
4)Boot into TWRP
5)Wipe System+Data+Cache+Dalvik
6)Flash ROM zip first and then Gapps secondly.
7)Wipe Cache+Dalvik.
8)Reboot.
If you followed these instructions in the exact same order and flashed a compatible ROM for your phone you shouldn't have any trouble in booting the ROM.

Next time try this:
Unlock bl
Boot into twrp
Format data
Restart and boot into twrp again by volume plus volume up. Format data again.
Now go to twrp home-settings-advanced-fix boot/disable verification and wait for few seconds.
Now unmount and mount data partition. Transfer rom zip file to internal memory by pc and install it. Its bound to work.

Check if system is mounted from TWRP recovery if not then enable it.
Also check if TWRP recovery is on latest version or not.(do backup everything if there is need of updating TWRP recovery)

I suggest you to use the pixel experience rom, it doesn't need gapps, just flash one zip file of the room itself
https://forum.xda-developers.com/xiaomi-redmi-4x/development/rom-pixel-experience-t3738095
I'm using this and it's super fine

Clearing up TWRP ambiguity versions + rooting MIUI pie

There is confusion over which recoveries to install for Redmi 6 (cereus).
Failure to install the correct TWRP will result in a hard brick with no chance of restoring the device without an authorised account or going to a Mi Service Centre.
If you are currently on the MIUI Oreo ROM:
You may ONLY use TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
The recovery by either TWRP or LR.Team is both ok.
If you are on the PIE rom:
You MUST use TWRP 3.3.1 or OrangeFox Recovery. R10.0-2 nocrypt Pie is confirmed to be working by me.
To root MIUI pie, follow the instructions in this post from 4PDA. This is because you will be unable to decrypt data.
You need to create an account to download the patched boot.img. You can either create one yourself or ask me or someone else to PM you with the boot.img. I will not attach it to this thread because it is not my work. The files have now been attached. See post below.
All credits go towards the respective recovery authors and 4pda

OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs

I did something wrong just don't know what
I tried with OrangeFox and when rebooted in recovery the phone would not turn on and just vibrates.
I was lucky because I just needed to open and remove the battery to get the phone back up.

So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
0) Download patched boot image from OP
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> Flash patched boot.img -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
would this be the correct procedure?
cheers

snoerme said:
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
cheers
Click to expand...
Click to collapse
?????????????????????
Why don't you skip steps 1-3 and just use XiaoMi Flash to install 10.4.4.0 via Fastboot by 'saving user data', then follow the instructions here? XiaoMiFlash will overwrite your recovery with the default so there is no risk of a brick. Then Flash TWRP Pie, flash boot img, flash magisk.
As I have said, you will brick your device. If you have TWRP Oreo, and then you install MIUI Pie, you will brick your device. You are doing EXACTLY what I told you not to do!

It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
edit: do you know if the latest magisk stable 20.0 would also work?

snoerme said:
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
Click to expand...
Click to collapse
I'm not sure - I have never flashed any MIUI ROM in TWRP. It seems normal though - the updaterscript probably tells TWRP to overwrite itself.
https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 It's a bit complicated

This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot and enjoy

Hi, currently I'm on stable China mui v10.4.3.0. Do you have boot.img on that v10.4.3.0. Currently link only provide boot.img for v10.4.2.0 for the china version. If no how do I get those, can I just backup them from twrp, Then create patched boot img with those backup boot? Thanks

Che0063 said:
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
Click to expand...
Click to collapse
Thanx for boot_10.4.4.0_R6_mgsk_193.img :good:
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
ThanX ! ! !
This work for me :good:
EDIT:
The flashlight and the camera does not work after flash the boot boot_10.4.4.0_R6_mgsk_193.img [emoji848]
Does anyone else have a similar problem?
View attachment 4862683

I have the camera and flashlight problem too. Any fix?

Unfortunately, I didn't find any solution.
Currently, my phone does not start, has a black screen and vibrates all the time. I can't run it in any way
EDIT:
Hi.
I was able to bring the phone to life. Get instructions on how to get to the battery https://www.youtube.com/watch?v=L9FH88b16bc https://www.youtube.com/watch?v=fAflA4UKLLY. In orangeFox recovery I checked the flashlight, it works.

That makes us two. My phone is unusable at the moment. I thought the root was responsible for the camera bugs, I uninstalled magisk, the bug was still there. I tried to reinstall MIUI 10.4.4 ang got an error. I've wiped everything including vendor and system.

I clean dalvik and cache and for now the phone is working even, after flash the patch boot.img

ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
Hello this is the steps i did but when rebooting to recovery i end up on blackcreen or mai i say powered off screen with the device unable to boot to recovery,any ideas what i did wrongly?

It seems there is something wrong with that boot patch. I followed a procedure on youtube and my phone is succesfully rooted without any bug

@ambyy
what guide did you use on YouTube?
Wysłane z mojego Redmi 6 przy użyciu Tapatalka

https://www.youtube.com/watch?v=I_4Zmco9R78&t=25s

Hard brick caused by flashing wrong TWRP is indeed able to get solved with unplugging the battery.

Miui v11 boot.img please