Related
The purpose of this document is to clarify a few basics about HTC Android Phones and basic commands to interface with the phones. Think of this as a beginner's guides to the Android device from a non-traditional user's point of view. I'll keep it simple and plain as much as I can for the new users. I'll also try to keep all the technical aspects true as much as I can while keeping it simple.
Before you go on, please read this and understand the basic concepts and how and why following commands are being used. Do not follow anyone's instructions/tutorials/guides without prior basic understanding of what each command do. I do want to believe it's humans visiting this forum and not lemmings. If you do not understand, feel free to ask here. I will or someone else also knowledgeable will answer your questions. DO NOT QUOTE THIS AS A WHOLE. My pet peeves and a complete waste of screen space.
Sometime, depending on your OS, command names may change (e.g: mouse / mouse.exe / mouse-linux / mouse-mac). For general purpose, we'll use mouse instead of an OS specific commands in this instructions.
So to repeat myself, if you understood the concepts of the commands, and you are on a linux system and someone's guide says touch index.php, you will automatically type touch-linux or whatever the name of your executable is on your system.
We shall assume you know how to install needed drivers and where to get android sdk and put the sdk binaries (executables) in the system path. If we need to expend this let me know and I'll expend this here.
Further, if I get any parts wrong, PM me and I'll get those parts corrected.
Android Partition, SPL etc.
Partitions:
Followings are a list of partitions on your android phone.
misc - misc partition -
recovery - Recovery Partition - This is where the original HTC recovery or Amon Ra's recovery or any other Recovery would go. Basically if you reboot into recovery it'll boot from here.
boot - This is your boot partition
system - This is where all your system information (ROM resides)
cache - cache (When you factory reset the phone, this area is wiped)
userdata - user data (like your login, your user settings etc) When you factory reset the phone, this area is wiped)
So, if you replace the recovery image, you are pretty much set for updates provided here at XDA. Note: By replacing your recovery image, you may not be able to have OTA updates.
ROM images will normally replace boot and system images at the same time and often time, userdata and cache too; reseting the phone completely.
SPL/Bootloader/Radio/Bricking Phones:
SPL / Bootloader is like BIOS on a computer. At least I think of it that way. SPL can be updated! SPL comes as either Security-On of Security-Off (S-ON/S-OFF).
Note: It is my understanding that radio will boot first, followed by other systems. So it is IMPORTANT that your radio image/version will work with your SPL image/version. This is the one and only reason for phones being bricked. You can not brick your phone by flashing a ROM or Boot image or recovery image. Once you flash the wrong radio for the SPL, the only known method of recovery is to send the phone back into HTC for repair.
How do I know the phone is bricked? A bricked phone can not boot into bootloader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Commands:
adb - Android Debug Bridge - One of the two things you'll need to know if you ever want to do anything non-conventional on your android based phone.
List of commands that can be used by adb can be prompted by typing adb at the system shell (command prompt or terminal)
Notable adb commands:
adb devices - If you don't know anything, this is the ONE thing you have to know.
adb devices will give you a list of devices connected to the computer. This is also a good way to make sure that your phone is actually connected to the computer.
adb reboot (bootloader|recovery)
adb reboot - this will reboot your phone normally.
adb reboot bootloader - this will reboot your phone back into the bootloader (white screen with the android on wheels)
adb reboot recovery - this will reboot your phone back into recovery console (either default or amon_ra's recovery).
adb shell - this will shell into the phone and you can now explore the phone. Remember phone's native backend os is linux so know your linux commands.
adb remount - remounts the system partition on the phone so you can you read/write to it.
adb push xxx yyy - will push xxx file from computer into yyy location/file on phone (needs rooted access)
adb pull xxx yyy - will pull xxx file from phone into yyy location/file on computer (needs rooted access)
Fastboot is protocol used to update the flash filesystem in Android devices from a host over USB. It allows flashing of unsigned partition images.
Notable fastboot commands:
fastboot devices - If you don't know anything, this is the ONE thing you have to know.
fastboot devices will give you a list of devices connected to the computer. This is also a good way to make sure that your phone is actually connected to the computer.
fastboot reboot - this will reboot your phone normally
fastboot oem unlock - this will unlock your bootloader - NOTE THIS WILL VOID YOUR NEXUS ONE WARRANTY
fastboot erase XXX - Will erase the partition XXX (such as userdata, cache) - mainly used for resetting phone and clearing userdata / factory settings.
fastboot flash XXX YYY - This will flash XXX partitionn with YYY image.
e.g: fastboot flash system system_update.img will flash/update your system partition with an image called system_update
If anyone needs me to dig deep into using anything else, please PM me. I'll add it on here. Hopefully this will help all newbies about the basic commands and what they do.
FAQs (UPDATED Feb 09, 2010)
Q: One question about the Android SDK. Do I need it to flash my N1 or just to program new apps? Where can I get it?
A: Android SDK is not entirely needed to flash the N1. However, there are tools in there that you need. Adb / Fastboot etc. Although they can be downloaded by themselves, the windows version of the SDK also have the Drivers that are needed for android devices for USB connection. So, it is recommended to get it. You can get it from developer.android.com
Q:I have never experienced anything like this when I did a hard-spl on my winmo phone. Radio versions are included with SPL's, right?
A: Official packages from HTC did come with nbh packaging, meaning it is a all in one upgrader that will update Radio, ROM, System etc, it is very much common for active development area here at XDA to get the radio or SPL or ROM separately and independently of one another. And as such, you will most likely flash them seperately (who wants to wait 6-8 months). Also, since this phone is released by google, HTC will most likely not update any major Radios. However, it is very likely that we will be hacking in Radio updates or any other "updates" from HTC from their new device - HTC Bravo.
Q: Is there a guide for snow leopard? I'm kind of stuck.
A: I personally ran android SDK and aforementioned executable on both MAC OS 10.5 and 10.6. Like I posted, the commands and the executable names may be slightly different. I may call adb and you may find it as adb-mac. I am not going to write 3 separate documents for 3 separate OSes. You have to know that adb=adb-mac (on your mac), adb-linux (for linux) etc. And yes the above guide will work universally.
Q: Can i replace the splash image..?? (unlocking related)
A: As of the above date (next to the FAQ) no you can not. Issue is probably a few folds. One of them is that splash1.img is not going in due to security lock. Remember, you unlocked the phone. HTC will not like it. Anyhow, I like the current quad color X. If you are thinking of getting rid of the lock logo, good luck. Even if you can get rid of it, you will still have to overcome the pink text that says ***UNLOCKED*** on your bootloader.
Q: Can you run Windows Mobile on Android Phones?
A: With enough resources given, sure. Will it ever happen? No. Why? Windows mobile compiler and builder cost $. As a matter of fact, as of version 5, it was going to cost me $75 per device. That's one of the reasons why handset makers went to Android open platform. Android is free and universal so as long as you use certain chipsets and certain items, you are good to go. Can it ever be ported? Sure. With right amount of time and money anything can be done. But at this point, it's cheaper for you to go buy a windows mobile smartphone.
Q: How do I know the phone is bricked?
A: You can not brick a phone unless you are flashing Radio/SPL packages. Make sure if you are doing that, you follow directions VERY CAREFULLY. A bricked phone can not boot into bootloader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Q: I have installed the Android SDK however, i cannot seem to get the laptop to detect the nexus. What have i left out?
A: Most common item that people forget to enable is USB Debugging. Settings => Applications => Development => USB debugging [checked]
Q: I have rooted n1. when I go to recovery to do backup, I get the triangle with the little green android guy, but phone is stuck there. I have to remove battery to reboot phone. What have I done wrong?
A: You still have the stock (shipping) recovery. If you want a different recovery (Amon RA's), download it, the from fastboot, run fastboot flash recovery downloaded_recovery.img
Q: Which step of the rooting / recovery procedure does it give root?
A: Root and Recovery are two totally different things. Recovery is a partition that contain recovery information. Stock recovery is what allows OTA updates etc. Normally it will search for update.zip in the root folder of the SD card. Amon_RA's Recovery or any other recovery images are there to enhance the traditional stock recovery. Amon Ra's Recovery for example, contains thing such as ability to update from different zip files, and backup/restore of your data/system.
Rooting is not done by recovery but is a kernel level access (simply put) that will give root or "SU". It is done by patching the boot partition of the your android device.
Q: What are the differences, advantages, disadvantages of the different ROM's?
A: They are all different. Some have some features, some are plain stock, some are made for bleeding edge kernel etc. You'll have to try them out and figure out yourself. I may make a chart of what they are (see the bottom at my signature - wiki) but with too many android devices, I will need some major help. One person alone will not have total knowledge of all the ROM releases. There are just way too many devices and ROMs.
Q: Which ROM will allow OTA updates?
A: Stock ROM WITH Stock Recovery.
Q: If the phone is SIM/carrier unlocked and you root do you have to SIM unlock again?
A: SIM/Carrier unlock has nothing to do with rooting your phone. You can still have root and still be carrier locked. Nexus One comes carrier unlocked from factory.
Q: How much space is there for apps? is using the sd card really necessary? (on Nexus One)
A: Search google? The phone has 512MB or space. That SHOULD be more than enough for you. If not, you have some serious issues. I do not believe you will not App2SD for Nexus One. Google did say during the release conference that they will update Android/N1 so that apps can be run/installed to SD but that requires some system and security changes (mainly to prevent pirated software - Yes if I write something, I deserve to get paid for it).
Q: When you do "flash zip from sdcard" or "fastboot flash image" does this merge and overwrite the files in to the partition?
A: When you update a software (via recovery), software my be merged. However, if you fastboot flash, just like the word flash says, it will flash and overwrite the partition.
Q: Which partition does "flash zip from sdcard" affect?
A: Depends on what you are flashing. It could be any or all of the partitions such as SPL, Boot, System, Recovery, Radio. You should study first before randomly flashing things.
sorry, got it!
blakestimac said:
i apologize if this is the wrong place for this but, but i have adb setup perfectly, but fastboot is not recognized at all. could i have missed something?
Click to expand...
Click to collapse
I need your system info.
What os are you running? where did you get fastboot? what are you trying to do?
Don't forget fastboot boot for testing images. My most used command
I still have no idea how to use or setup adb i have downloaded the sdk and used fastboot and superboot to root my phone and am currently running the cm 5.0 beta 2 rom and want to learn how to use adb so i can enable the ram. Thanks, Joe
really a noob question here.....it wa easier with Hero.
i have installed the Android SDK
however, i cannot seem to get the laptop to detect the nexus.
what have i left out?
wishmaker738 said:
really a noob question here.....it wa easier with Hero.
i have installed the Android SDK
however, i cannot seem to get the laptop to detect the nexus.
what have i left out?
Click to expand...
Click to collapse
Check the FAQ.
dylanfan424 said:
I still have no idea how to use or setup adb i have downloaded the sdk and used fastboot and superboot to root my phone and am currently running the cm 5.0 beta 2 rom and want to learn how to use adb so i can enable the ram. Thanks, Joe
Click to expand...
Click to collapse
Ok. I need to know what you actually did. I am not understanding what you are trying to do.
Can't run adb commands - device not found
Thanks for the info. I am having an issue with running adb commands. My phone is rooted via superboot and I tested it with Nexus Torch which works. Now I am trying to install the new kernel so I can run the wireless tether app... but I can't get any of the adb commands to recognize the phone. I boot the phone by holding the trackball and power button. I am in USB debugging mode. When I run fastboot devices, the phone serial number shows up. When I run adb devices, it says no device detected. And when I try to run any other adb commands they do not work, even though fastboot commands work. Any ideas? Thanks.
Sorry i was pretty vague before i down loaded the sdk and also installed the adb setup file included with the superboot pack but just have no idea how to get it to work and add things through adb. I tried typing adb commands into comand line with the phone connected to the computer but nothing happend. just said not recognised command so i just basically need a rundown of how to setup adb.
dylanfan424 said:
Sorry i was pretty vague before i down loaded the sdk and also installed the adb setup file included with the superboot pack but just have no idea how to get it to work and add things through adb. I tried typing adb commands into comand line with the phone connected to the computer but nothing happend. just said not recognised command so i just basically need a rundown of how to setup adb.
Click to expand...
Click to collapse
I'm a noob so can't offer much help...but I would make sure the usb drivers are installed if you're using windows....this probably should have happened when you installed the sdk, but you can also install it through the device manager and point it to the folder where the usb drivers are located. Also make sure the phone is in USB debugging mode. also you may need to reboot your pc. Make sure you have setup running when you run the adb commands. you need to be in the same directory as the adb file, or in the case of the superboot pack you need to type "adb-windows" not just "adb". you may also need to put .exe, ie adb-windows.exe.
pwnvds said:
Thanks for the info. I am having an issue with running adb commands. My phone is rooted via superboot and I tested it with Nexus Torch which works. Now I am trying to install the new kernel so I can run the wireless tether app... but I can't get any of the adb commands to recognize the phone. I boot the phone by holding the trackball and power button. I am in USB debugging mode. When I run fastboot devices, the phone serial number shows up. When I run adb devices, it says no device detected. And when I try to run any other adb commands they do not work, even though fastboot commands work. Any ideas? Thanks.
Click to expand...
Click to collapse
You run fastboot from the white screen. Android on non-white screen. It's one or the other. It's ADB or Fastboot (depending on the mode of the phone).
dylanfan424 said:
Sorry i was pretty vague before i down loaded the sdk and also installed the adb setup file included with the superboot pack but just have no idea how to get it to work and add things through adb. I tried typing adb commands into comand line with the phone connected to the computer but nothing happend. just said not recognised command so i just basically need a rundown of how to setup adb.
Click to expand...
Click to collapse
Is the directory where ADB/fastboot (SDK) is installled in your system path?
I am guessing it's not. If it was, just by typing adb alone (without commands), it'll give you a list of commands. Click here if you want to know how to change your system path to include a particular folder.
We're now in the age of nintendo pilots and point and click OS that no one knows how to use command lines and system paths anymore.
recovery
I have rooted n1. when I go to recovery to do backup, I get the triangle with the little green android guy, but phone is stuck there. I have to remove battery to reboot phone. What have I done wrong?
umplarry said:
I have rooted n1. when I go to recovery to do backup, I get the triangle with the little green android guy, but phone is stuck there. I have to remove battery to reboot phone. What have I done wrong?
Click to expand...
Click to collapse
Answered in FAQ area.
seraph1024 said:
Answered in FAQ area.
Click to expand...
Click to collapse
I tried that before I posted. I searched the FAQ again. Maybe I am a complete DA, but still can't find answer. I don't mind searching, it will help me to learn, but could you point me in the right direction in FAQ?
umplarry said:
I tried that before I posted. I searched the FAQ again. Maybe I am a complete DA, but still can't find answer. I don't mind searching, it will help me to learn, but could you point me in the right direction in FAQ?
Click to expand...
Click to collapse
Q: I have rooted n1. when I go to recovery to do backup, I get the triangle with the little green android guy, but phone is stuck there. I have to remove battery to reboot phone. What have I done wrong?
A: You still have the stock (shipping) recovery. If you want a different recovery (Amon RA's), download it, the from fastboot, run fastboot flash recovery downloaded_recovery.img
Click to expand...
Click to collapse
There you go.
seraph1024 said:
There you go.
[/B]
Click to expand...
Click to collapse
Thanks for your help
seraph1024 said:
There you go.
[/B]
Click to expand...
Click to collapse
I had it downloaded, just had not flashed it
I've been looking all over, but I probably need to check the HTC Dream forum or something.
How do I install a custom ROM? I know you have to adb push update.zip somewhere, but I can't find any info about this. Please help.
May NOT work for 2.3.3, if attempting on 2.3.3 use old part 1! - Will wipe all data though
Windows ONLY!
Hey guys, rooted my Nexus S today, and decided to write a thorough, detailed guide on how I did it, as none of the guides I had found had everything detailed. I came across a few problems, and all of this is in the guide. I successfully completed it on my Nexus S running 2.3.2, so any version below that will also work.
The original guide was made by AllGamer, and can be found here. I followed this guide, and added things when I found it was needed
The full guide with everything (including links, pictures) can be found on my site, Complete Android.
New info: Upon finding another thread over at XDA (http://forum.xda-developers.com/showthread.php?t=931865) it has been realized that you can root your Nexus S without unlocking the bootloader, and therefore not loosing your data on the SD card. Part 1 for the new method is still the same, but choose the new Part 2!
WARNING: Rooting your device will wipe all data off it, so you will loose EVERYTHING! Make sure you backup all important data first. Only applies to old Part 2 (fastboot oem unlock method), but it is still a good idea to backup important information!
Click to expand...
Click to collapse
What you will need:
Nexus S (obviously)
Android 2.3 SDK
USB Cable
PDAnet (for drivers)
Clockwork Recovery Image
Superuser
Part 1
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Once it has finished downloading, unzip it, and run the SDK manager.
Select whatever components you wish to install, but you MUST make sure you install Google USB Driver (Available packages > Third party Add-ons > Google Inc. Add-ons > Google Usb Driver package, revision 4) otherwise this guide will not work!
We must now install the Google USB Driver, or the phone will not be recognised as a device other than a mass storage device.
Connect your Nexus S to your computer, and put it in USB storage mode.
Put it in USB Debugging Mode (Settings > Applications > Development > USB Debugging)
Windows should now recognise your Nexus S when you plug it in, and ask to install drivers. It probably won’t find anything, so we need to help it manually.
(Installing drivers manually varies between Windows versions, so please refer to http://developer.android.com/sdk/win-usb.html if you are having trouble). Launch Device Manager (you can find it in Control Panel), find Other Devices, and listed under that heading, you should find Nexus S. Right click, and select Update Driver Software. Click Browse my computer for driver software, find your SDK folder, then the google-usb_driver folder inside it, click OK, then Next. This should install the USB driver successfully. Reboot your computer.
Power off your Nexus S, connect it to your computer via USB cable, and boot it into the Bootloader Interface (you can do so by holding down the Power and Volume Up buttons at the same time).
It should say LOCK STATE – LOCKED, in white just above the green Android. You are now ready to move on!
Part 2 - Fastboot oem unlock method - WIPES ALL DATA!
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use ‘fastboot oem unlock’ (the rooting command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn’t).
Now in the command prompt, type in (without the quotes) ‘fastboot oem unlock’.
Now turn your attention to the phone, and read through the new information displayed on the screen. Using the Volume keys select Yes, then press the Power button. This will WIPE EVERYTHING! I bear no responsibility for any lost data on your phone!
If everything is successful, on your phone, the LOCK STATE should now read UNLOCKED, and on your computer, the command prompt window should say something like this:
Download the Clockwork Recovery image (here if you don’t already have it) to your Android SDK tools folder (*Android SDK*\tools).
Rename the newly downloaded Clockwork Recovery image to ‘recovery.img’ (no quotes).
Now we need to flash it to our Nexus S, so enter this command into the Command Prompt (make sure it is in the Androis SDK tools folder!) ‘fastboot flash recovery recovery.img’ (without the quotes).
If all is successful, the Command Prompt window should look something like this now:
Download the superuser app to the Android SDK tools folder.
Power on your Nexus S, leaving it connected to USB.
Mount the USB storage, and drag and drop the superuser .zip file you just downloaded into the root of the internal SD card (so Computer > *Device Name*, not in any other folders!). It should look something like this:
Power off the Nexus S, and return to the Bootloader Interface (step 9, part 1).
Select Recovery using the Volume buttons, then the Power button.
The phone should reboot into Clockwork Recovery, but if not don’t panic, just repeat steps 9-12, including downloading a new copy of the file (mine only worked the second time around, don’t worry!)
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot. (You will now also have an unlocked padlock when you boot up)
Done! You now have to set up your phone again like when you first got it, but it will be rooted now.
New Part 2 - Does NOT wipe everything - Keeps a locked bootloader
Make sure Part 1 is completed.
Make sure you have downloaded the Clockwork Recovery file and the Superuser file.
Move the Clockwork Recovery file to your tools folder within the Android SDK folder, and rename it to recovery.img (for simplicity).
Connect your Nexus S via USB to your computer and mount it as USB storage. Copy across the Superuser file to the top level of your sdcard. (So the first window you see, not in any other folders. The sdcard is just where all the files are stored, don't worry about it too much for now).
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don't worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use 'fastboot boot' (the boot image command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) 'cd c:\*YOUR SDK*\tools'.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn't).
We now need to use the 'fastboot boot' command to load Clockwork Recovery onto our Nexus S. In the command prompt, type in the following (but without the quotes, as always) 'fastboot boot recovery.img'
Once you are in Clockwork Recovery (it may take a couple of tries, don't panic, just redownload Clockwork Recovery, and complete steps 3 and 10, part 2) it should look something like this:
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot.
Done! You should still have all your data present on your phone, and have root access!
Notes
As AllGamer said in his tutorial:
It’s normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you’ll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you’ll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Keep this in mind! It's not because you did something wrong
Also, some root apps require BusyBox to be installed, as I found out with Titanium Backup, so once you set up your Nexus S again, head on into the Market, and download BusyBox. It installed fine on my Nexus S this way, and now TB works fine.
I hope this is the best, most thorough guide you will find on rooting the Nexus S. Enjoy! Feedback is appreciated, and I will help out if you need any extra help.
Your guide has been wonderful however I'm stuck on part 2, step 4. I tried writing in the path to my directory and they keep giving me whatever I wrote in the command prompt "is not recognized as an internal or external command, operable program or batch file"
"Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’."
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
STARSCR33M said:
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Click to expand...
Click to collapse
Ok so if you want to change directories in the command prompt, you need to use the command
Code:
cd
So in your case I would type in
Code:
cd c:\Users\Du\Downloads\android-sdk_r09-windows\android-sdk-windows\tools
That way is fool proof, however you could take a shortcut, because you are already in the Users/Du folder (because of how it looks when you first open it), you could just type in
Code:
cd Downloads\android-sdk_r09-windows\android-sdk-windows\tools
Hope that helps
ravidavi said:
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Click to expand...
Click to collapse
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
EDIT: New approach added, now there is choice and easyness for all
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
Click to expand...
Click to collapse
Thanks
Jonathon Grigg said:
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
Thanks
Click to expand...
Click to collapse
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step. Once you're in clockwork you pretty much own the phone. I'll be interested to see if someone can use clockwork to flash a new boot image once rooted without the unlock; if so I can't see any reason to unlock the bootloader. That said, mine is unlocked, and I like it that way, but many won't root for fear of losing data on the phone.
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it. I guess that's there own fault for not doing enough searching on their own...
Anyways, nice and thorough effort. I'm sure many will benefit from your additions to AllGamer's tutorial.
distortedloop said:
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step.
Click to expand...
Click to collapse
I have been wondering that myself. My guess is that for the average user you don't need to, but maybe it's for real power users who build their own ROM which has been fully modded or something, I'm not sure.
but many won't root for fear of losing data on the phone.
Click to expand...
Click to collapse
I definitely agree with that, and your guide is probably the best way for those people!
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
Click to expand...
Click to collapse
Exactly, this is one of the better uses for both methods. I already had to wipe my phone twice due to Samsung CS so I'm used to it Although it does give you a chance to clear out the apps you don't need. Doing that I noticed better battery life on my phone.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it.
Click to expand...
Click to collapse
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Thanks distortedloop
This is awesome cause i relocked my bootloader i really just needed root. Thanks!
Edit oops lost track of tabs open.
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Jonathon Grigg said:
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Click to expand...
Click to collapse
Nicely done. Thanks.
sam4free said:
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Click to expand...
Click to collapse
That's what I suggesting a couple of posts above (root without unlock to at least make a backup of user data).
Restoring a titanium backup would not re-lock the phone. A nandroid restore might, depends on what all it imaged and restores, but it's so easy to re-root, that doesn't seem like a big deal.
Jonathon Grigg said:
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Click to expand...
Click to collapse
Looks like you forgot to add the link in your copy pasta.
AtomicPC said:
Looks like you forgot to add the link in your copy pasta.
Click to expand...
Click to collapse
I've been working on it I just wanted to get it up here as soon as I could That's why I mentioned that the full guide is available on my website. I'm going back to school today, so I don't really have too much time for changing links now. Besides, most people on XDA should know how to look at the 'What's needed' part
Sent from my Nexus S using XDA App
Jonathon,
Thank you for posting this detailed guide to rooting without losing your data! I do have a question. As you've probably heard, there are a few updates coming soon and if they are like they were on the N1, they always broke root. So getting root back was tricky unless I "unrooted" before applying the update. Using your method, is it easy to "unroot"? Thanks!
No problems
As for your problem, I never actually had a N1 so I don't exactly know why that would happen. So far from the 2 updates available to NS owners it seems like the OTA update does break root but it appears to be the same to get it back again. Can someone confirm this? I haven't been through an update with my root yet.
As for unrooting, if you haven't unlocked the bootloader (so you have followed the new part 2) I think it is just a case of finding a stock image (I think there's a GRH78 one around here somewhere) and booting into Clockwork Recovery and flashing it. That should remove root and then also give you a notice to install the GRH78C OTA update so you get the latest version.
I think that is what you meant? If you did unlock the bootloader (using the original part 2) then I think you just have to follow the same steps as I mentioned just then but afterwards go back into the bootloader interface and run 'fastboot oem lock' and it should be right.
Sent from my Nexus S using XDA App
Question on Part 2- step 1.
Code:
# We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
hmanxx said:
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
Click to expand...
Click to collapse
When I tried to use the fastboot command with my Nexus S connected, it would hang and not do anything, despite leaving it for about 5 minutes. I searched online, and found the PDAnet solution, so I don't know what the difference is exactly. All I found the Google SDK USB drivers to do is enable you to see your device in Device Manager, however you could try it without the PDAnet drivers, and let me know what happens!
Thanks
Thanks for the prompt reply.. I tried out the google driver..it doesnt work under fastboot. I eventually get the fastboot enabled driver..that could explain why the pdanet driver required.
After i installed the fastboot enabled driver, i could test the connectivity under fastboot with "fastboot devices"
thanks going to try out rooting..i just want simple root access..without wiping data is a ++ ..
I managed to run fastboot boot recovery.img...going into clockwork menu..apply the superuser.zip.(for froyo version)..till completion..no word of failure..
However after rebooting, su and SuperUser.apk are not installed.( I used adb to check the system/app and system/bin folder.
Edit- manage to root properly after system mounting .
Just a note..to properly complete the rooting, one need to apply mounting then mount system before applying the Superuser.zip install from sdcard.
Prior to step 11, you may want to add the following steps for folks having problem to get the superuser.zip to install properly.
Originally Posted by droidmage
So all you guys who are having trouble getting root inside the rom, When your in recovery before you flash the superuser.zip file select -- mounts and storage -- then --mount /system -- then flash the .zip file and reboot
Click to expand...
Click to collapse
Thanks for the extra bit of info, I will attempt to add that in when I get a bit more time on my hands. when I did it it seemed to work fine so thanks for discovering that!
Enjoy your rooted phone
Sent from my Nexus S using XDA App
How to revert back to Android Wear 1.5
Flashing stock AW1.5 build:
- Unlock your bootloader
- Reboot into FASTBOOT MODE
- Download STOCK ROM MWG68 images
- via adb type commands:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot erase userdata
fastboot reboot
How to block OTA to AW 2.0
- adb shell
- pm disable com.google.android.gms/.update.SystemUpdateService
- pm disable com.google.android.gsf/.update.SystemUpdateService
- exit
ingbrzy said:
How to block OTA to AW 2.0
- adb reboot bootloader
- adb shell
- pm disable com.google.android.gms/.update.SystemUpdateService
- pm disable com.google.android.gsf/.update.SystemUpdateService
- exit
Click to expand...
Click to collapse
This probably won't work, you don't have adb shell available in bootloader, and while booted up you can't use the pm disable command without root..
Maxr1998 said:
This probably won't work, you don't have adb shell available in bootloader, and while booted up you can't use the pm disable command without root..
Click to expand...
Click to collapse
true.. it will be more easier to boot TWRP, disable dm-verify and edit build.prop line
Code:
ro.build.id=MWG68
to
Code:
ro.build.id=MWG68_something
Thanks, i had to revert because i started getting random reboots since 2.0... Now I'mm gonna wait and see if it continues.
BTW, i think you forgot "fastboot oem lock" after downgrading.
after following the guide and flashing aw 1.5 I get an error saying zenwatch manager has stopped and then the reboots, and so on.
any ideas what went wrong and how can I fix this?
asafgolan said:
after following the guide and flashing aw 1.5 I get an error saying zenwatch manager has stopped and then the reboots, and so on.
any ideas what went wrong and how can I fix this?
Click to expand...
Click to collapse
make factory reset.. unpair and reset in the settings..
ingbrzy said:
make factory reset.. unpair and reset in the settings..
Click to expand...
Click to collapse
Thanks, that did the trick!
I'm having to much issues with 2.0 and overall I hate the update, so this guide is very appreciated, yet my watch is brand new and I don't want to mess things up, can you please do a complete guide with links to all the software needed and stuff? This seems to be for those who are already in the "knowing how to flash the FW", I believe I need to unlock the bootloader to in order to revert to AW 1.5 right? Or isn't that needed?
Thanks for the help @ingbrzy
Any chance one of you can help with this issue?
https://forum.xda-developers.com/zenwatch-3/how-to/fastboot-recovery-getting-g-co-abh-t3637403
Ok, I've been doing some reading and I'm almost ready to flash the watch back to 1.5, but just in case I'll make here the full list of what I've done/about to do, please check if all is correct:
1 - Download and place the Platform-tools folder from here on a easy access place to access on your PC
1.b - Edith Path Variable as shown here just be make things easier
2 - Enable USB debugging on watch by going to the watch Settings/System/About and pressing a few times on the Build Number
2.B - To check if the connection is well done between watch and PC open a command line on Windows and write "adb devices", it should show the watch SN listed
3 - Unlock the bootloader!
3.1 - Reboot to fastload (via *adb command* (You do this by opening a command prompt window from within windows itself) "adb reboot bootloader")
3.2 - type command "fastboot oem unlock"
4 - Download STOCK ROM MWG68 images
From here is where I have doubts, DON'T FOLLOW THESE INSTRUCTIONS until someone more experienced confirms if it's correct or not
5 - Place the files unziped: system.img / boot.img and recovery.img downloaded on point 4 inside the platform-tools folder in point 1
6 - Open a command prompt window and past the following code ***DOUBT*** Full code at once as shown bellow or line by line followed by enter??
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot erase userdata
fastboot reboot
7 - make factory reset on watch by... "unpair and reset" in the watch settings...
7.1 - Re-lock bootloader is advised? How and why to do it?
8 - Don't install AW 2.0 again?
@ingbrzy is this correct or am I missing something?
Thank you for this thread :good:
I'm back on 1.5 it's better for me in this moment...
My watch understand me again :laugh::laugh::laugh:
Edit:
I have two questions:
How I lock bootloader?
How to block Ota? Easiest way?
Thank you very much
Android Wear Updates
Does anyone know if leaving the bootloader unlocked prevents android wear 2.0 OTA
updates or any other updates?
Thanks, have a great day!
Misterjunky said:
Does anyone know if leaving the bootloader unlocked prevents android wear 2.0 OTA
updates or any other updates?
Thanks, have a great day!
Click to expand...
Click to collapse
No, I have unlocked bootloader and after night my watch download AW2.0 update
TWRP Recovery
I wonder if installing TWRP recovery might prevent Android Wear 2.0 OTA update?
I am on Android Wear 1.5 and do not want to update or get notifications to update.
Thanks,
---------- Post added at 01:02 AM ---------- Previous post was at 12:47 AM ----------
Hoffmanns said:
No, I have unlocked bootloader and after night my watch download AW2.0 update
Click to expand...
Click to collapse
Have you or anyone found a way to delete the AW2.0 update file from the watch?
Thanks!
Misterjunky said:
Have you or anyone found a way to delete the AW2.0 update file from the watch?
Thanks!
Click to expand...
Click to collapse
In this moment NO
Factory reset in recovery may help...
But I need block OTA update first
re: Build Prop file
ingbrzy said:
true.. it will be more easier to boot TWRP, disable dm-verify and edit build.prop line
Code:
ro.build.id=MWG68
to
Code:
ro.build.id=MWG68_something
Click to expand...
Click to collapse
@ingbrzy
Is it possible to use adb to pull and push the build-prop
file from /system to /sdcard or some other place where it would be
accessible making it easy to edit without rooting the watch?
(preferably someplace in Windows 10 or in my S7 Edge phone?)
If it's possible, could you please post the adb commands to pull and push the file?
Thanks in advance, have a great day!
I may go back as well. Aw 2.0 hasn't been a totally smooth experience even after wiping data and clearing cache. Sometimes it'll stutter and I will end up clearing all notifications instead of going one by one
Someone, please explain how to block OTA update to 2.0.... Please
re: Block OTA notifications
avchd said:
Someone, please explain how to block OTA update to 2.0.... Please
Click to expand...
Click to collapse
The only way I found to block updates and notifications for updates
is to ROOT the watch.
I rooted my watch 3 days ago after really trying to like this AW 2.0
but after all was said and done I just could not see any reason to
keep the new AW 2.0.
The only two things which we good and nice in AW 2.0 was the
really good looking and smooth/fast scrolling of the app drawer
and the nicer notifications which AW 2.0 has.
But everything else in AW 2.0 is really crappy way too crappy for me.
If you are interested in rooting and twrping your watch here is the link
with step by step instructions and download links for the rom.
Android Wear v1.5 pre-rooted and twrp'ed custom rom:
https://forum.xda-developers.com/zenwatch-3/development/rom-asus-zenwatch-3-swift-t3537340
The main problem with keeping AW 1.5 without flashing
a custom rom is all those OTA notifications you get over
and over again without a way to disable the notifications.
Come on guys, do we really need a Google Play store in our watch... LOL
Also the only way a watch can be called "stand-alone" is if it has a sim card.
Good luck, have a great day!
Even though I knew what I was doing, I was on a new computer so I "followed" your instructions because I've never seen anyone write it out so thoroughly from no ADB at all, and glad to say you pretty much nailed it through that. Except step 2, it's more like a whole bunch of times. Don't know why you've gone un-thanked and un-replied!
Step 5 is unnecessary because of the method of setting up ADB with the path variable described in 1b (if you don't do step 1b, then the files need to be in the platform-tools folder). You just need to get to the same folder in the command prompt as the files. The command prompt by default opens to C:\Users\pyroguysf (or whatever your own name is), which is where your downloads folder is located by default, so if you unzip the files to your downloads folder, type "cd Downloads" to navigate into your downloads folder. Once you're in the same folder as the img files you unzipped, then run the commands listed in step 6, each line, one at a time. After each one, it should show the progress, and make sure it says completed not failed (I forget the exact words used) before going to the next. If it fails that's a separate topic, but it shouldn't. I always advise a factory reset after any significant software changes. Re-locking the bootloader is for security's sake, and while not 100% necessary, is highly recommended, unless you plan to be changing the software again anytime soon (I see a modified version in this thread that supposedly has OTA's disabled I might try, but this is slightly more advanced). Re-locking is basically the reverse of step 3 - reboot into bootloader with "adb reboot bootloader" and then once it's there "fastboot oem lock" instead of unlock.
Edit: That's right, you get the message upon boot for a while that your device can't be checked for corruption when it's unlocked. Also, my watch won't boot now, so I'm going to try a few more things... That's why I waited until the weekend.
Edit2: Re-unzipped the files (md5 was fine), did boot, recovery, then system, and did "fastboot format userdata" instead of "fastboot erase userdata" in step 6.
Edit3: Edited the quote from MK2ever below with what worked for me.
MK24ever said:
Ok, I've been doing some reading and I'm almost ready to flash the watch back to 1.5, but just in case I'll make here the full list of what I've done/about to do, please check if all is correct:
1 - Download and place the Platform-tools folder from here on a easy access place to access on your PC
1.b - Edit Path Variable as shown here just be make things easier
2 - Enable USB debugging on watch by going to the watch Settings/System/About and pressing repeatedly on the Build Number until it says "you are a developer!"
2A. Go to Settings>Developer Options and turn on "ADB Debugging" and plug your watch cradle into your computer and wait until windows installs drivers (Win 7 found them automatically for me)
2.B - To check if the connection is well done between watch and PC open a command line on Windows and write "adb devices", it should show the watch SN listed
2.C - when your watch asks to allow connections, tap "always allow from this computer"
3 - Unlock the bootloader!
3.1 - Reboot to fastboot (via *adb command* (You do this by opening a command prompt window from within windows itself) "adb reboot bootloader")
3.2 - wait until the watch says "fastboot mode" then type command "fastboot oem unlock"
4 - Download STOCK ROM MWG68 images
5 - Place the unzipped files system.img boot.img and recovery.img into your downloads folder.
6 - Open a command prompt window and type "cd Downloads" to get to navigate into your downloads folder (Windows 7 default, 8 and 10 too I think) and then enter the following commands one at a time waiting for it to give a "completed" message before moving on
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot format userdata
fastboot reboot
7 - make factory reset on watch by... "unpair and reset" in the watch settings...
7.1 - Re-lock bootloader is advised. Repeat steps 2 through 3.1 and then "fastboot oem lock"
8 - Don't install AW 2.0 again?
Click to expand...
Click to collapse
I'm trying to create an application to make flashing files on our pixel devices easier.
Features:
Install ADB
Unlock bootloader
Reboot to bootloader
Download and install factory images
Download and install TWRP
Download Magisk
Easy to use GUI
Enjoy! :good:
Credit to Dees_Troy and bigbiff for TWRP image.
Feel free to modify and hack away at the source.
WARNING: I am not responsible for anything that goes wrong using this tool, it works fine on my windows 10 machine, and tested on windows 7. However, make sure you know what these tools are doing beforehand.
New update!
Beta Release
What's New?:
All new base being built.
Better .exe support (requires installing the app)
Console interface for now.
Removed some features that were broken in the old app, will add them back one-by-one, but this time, not until they work 100%.
Usage:
Just follow the prompts on screen.
Allows picking the files for booting TWRP or pushing files via ADB.
Install:
Easy method (requires install): https://github.com/boostedd2/crosshatchdb/blob/boostedd2-patch-1/crosshAtchDB-2.3-win32.msi
Install the app with the provided .msi, choose where you want to install it. Open the folder where you installed it and run the crosshatchdbbeta.exe.
Build/Run from source:
Requires:
source .py file: https://github.com/boostedd2/crosshatchdb/blob/boostedd2-patch-1/crosshatchbeta.py
cxfreeze config: https://github.com/boostedd2/crosshatchdb/blob/boostedd2-patch-1/setup.py
To run from source, just install Python on your PC, then from cmd window run : "pip install requests".
Then just double click on the crosshatchdbbeta.py file.
To build the .exe:
You need both files from above.
Install Python
python -m pip install cx_Freeze --upgrade
With setup.py and crosshatchdbbeta.py in the same directory, run "python setup.py build"
This is a very minimal release, I will continue to fix any bugs and add features once they are working better.
Thank you so much for this! I was actually going to unlock my bootloader and root today after work. Now it will only take 2 minutes instead of 20!
I appreciate it and will report back later after testing!
**Didn't want to waste thread space so I'm editing this to reply** - Thank you so much for the response below! Very helpful! I'm up and running and really appreciate the tool and the help!
NippleSauce said:
Thank you so much for this! I was actually going to unlock my bootloader and root today after work. Now it will only take 2 minutes instead of 20!
I appreciate it and will report back later after testing!
Click to expand...
Click to collapse
No problem, quick usage guide to make sure it goes smooth.
Enable OEM unlock in developer options, also enable ADB debugging.
Plug in your phone, run crosshatchdb.
Select option 9, this will auto download and extract adb to your c: drive.
Select option 1 to check for ADB devices, check the box on the dialog that pops up on your phone.
All set. You can download magisk directly to your phone or push it from your PC.
Reboot bootloader option 2, from here you can unlock the bootloader(formats your phone btw).
Setup your phone, enable ADB debugging again and your free to reboot bootloader and download/boot TWRP to flash magisk.(use TWRP img not zip)
Hopefully these instructions are not too confusing, it is pretty easy once you do it once, and the tool really does make the next time you do it faster.
Tested on a windows 7 virtual machine and my own personal windows 10 machine.
NippleSauce said:
Thank you so much for this! I was actually going to unlock my bootloader and root today after work. Now it will only take 2 minutes instead of 20!
I appreciate it and will report back later after testing!
Click to expand...
Click to collapse
The time to unlock a Google purchased Pixel isn't the issue. The factory reset just sucks if you run stock for any time before doing it.
Two things I think you should add.
1) adb sideload for when adb works in twrp.
2) adb logcat for our great developers, so there isn't an excuse for getting them a logcat in event that they need one.
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
Two things I think you should add.
1) adb sideload for when adb works in twrp.
2) adb logcat for our great developers, so there isn't an excuse for getting them a logcat in event that they need one.
Click to expand...
Click to collapse
Good idea, should be easy to pipe logcat output to a text file.
ADB sideload can be added as well, next update will probably be when TWRP ADB is fixed, or sooner depending how long that takes.
Already thinking of ways to make the current version of this script more automated, but I like to err on the side of explicit is better than implicit.
Thanks for the ideas.
Can this install TWRP ?
Zorachus said:
Can this install TWRP ?
Click to expand...
Click to collapse
No. Everything you need to know is in the OP and everything else you need to know is in the twrp thread.
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
No. Everything you need to know is in the OP and everything else you need to know is in the twrp thread.
Click to expand...
Click to collapse
This.
It is a good option of you want an easy way to just boot TWRP in 1 button, if you don't want to install a custom recovery like TWRP.
New update coming soon, decided that command line didn't work very well for this purpose...
Also working on making all of the actions smoother.
New update released, let me know if you have any issues or feature requests, still waiting for TWRP to be fully functional before adding ADB sideload options.
CMD window still wants to hang out for now, you can minimize it though if needed.
can you add a (check for update)
Maty360414 said:
can you add a (check for update)
Click to expand...
Click to collapse
Yes, that is on the list for next update.
When TWRP is more reliable I will probably add options for copying TWRP backups to your PC as well.
Still need to get rid of the cmd window and cut down on having to open browser windows or file selection dialogs, just to get it feeling less clunky.
I'd like to send out a big thank you to boostedduece I've used platform tools and google flash all for years with no hitch whatsoever but I tried to glies an update to my kernel and ran into the red corrupt device thing and used my platform tools to flash all and halfway through it stopped and said error. I then tried this tool and it worked perfect!! Thank you so much!
quinejh said:
I'd like to send out a big thank you to boostedduece I've used platform tools and google flash all for years with no hitch whatsoever but I tried to glies an update to my kernel and ran into the red corrupt device thing and used my platform tools to flash all and halfway through it stopped and said error. I then tried this tool and it worked perfect!! Thank you so much!
Click to expand...
Click to collapse
Glad to hear it helped out, working on some new updates to make the UI even better.
Trying to make all of the download links update automatically too, just working on some web scraping again ?
It's a nice little tool if something gets messed up, also for new users to get up and running.
New update released, Download factory image has been overhauled, it will now download the image automatically, check the SHA-256 hash, then unzip it to the correct folder, just run the factory image flash option after and you're set. Be patient, the image.zip can take a while to download, takes several minutes for me, but I'm only at 50mbps down...and who knows if google throttled my connection after all the web scraper testing lol.
Pull TitaniumBackup folder via ADB to your PC, pull TWRP backup might not work it failed for me, but will not cause any damage to your PC or phone, ADB is copying the files read only from your device, and ADB just seemed to crash on me.
CMD window is still here for now until I pipe the output to the built in box on the GUI and bind keyboard keys to interact with it. For now it will help with any debugging.
boostedduece said:
New update released, Download factory image has been overhauled, it will now download the image automatically, check the SHA-256 hash, then unzip it to the correct folder, just run the factory image flash option after and you're set. Be patient, the image.zip can take a while to download, takes several minutes for me, but I'm only at 50mbps down...and who knows if google throttled my connection after all the web scraper testing lol.
Pull TitaniumBackup folder via ADB to your PC, pull TWRP backup might not work it failed for me, but will not cause any damage to your PC or phone, ADB is copying the files read only from your device, and ADB just seemed to crash on me.
CMD window is still here for now until I pipe the output to the built in box on the GUI and bind keyboard keys to interact with it. For now it will help with any debugging.
Click to expand...
Click to collapse
Can't believe I still haven't gotten the Ota Nov update
Will this work on p3?
frewys said:
Can't believe I still haven't gotten the Ota Nov update
Will this work on p3?
Click to expand...
Click to collapse
It will work for pixel 3, but you will need to download the factory image for your blueline device and extract it into c:\crosshatch_stuff\platform-tools. This program is basically a gui wrapper for ADB commands.
Just stick with the ADB tools section and find the downloads you need separately.
boostedduece said:
It will work for pixel 3, but you will need to download the factory image for your blueline device and extract it into c:\crosshatch_stuff\platform-tools. This program is basically a gui wrapper for ADB commands.
Just stick with the ADB tools section and find the downloads you need separately.
Click to expand...
Click to collapse
Right
So it doesn't automate the process the same as for xl?
frewys said:
Right
So it doesn't automate the process the same as for xl?
Click to expand...
Click to collapse
It will still install ADB and allow you to run reboot bootloader, boot TWRP, factory reset, ADB logcat, unlock bootloader.
But the only extra part that is manual would be extracting the factory image into the c:\crosshatch_stuff\platform-tools folder.
NOTE: Since I am a semi-amateur at unlocking/rooting, this is not independent development. Instead, I noticed these forums don't seem to have a single one-stop guide that lays out the process for safely rooting the latest (9.0.7) Oxygen OS 9.0.7. This process may seem obvious to experts, but for people who are rusty or new to this, I wanted a process that didn't require lots of extra cross-referencing and research. I hope this is ok.
Big thanks to Dameon87 who supplied the patched boot rom, and deserves all the credit for the actual hard work with the patched boot image.
STEP 1: PREPARATION
Check that your phone is on 9.0.7.
On PC: Download patched_boot-9.0.7.img and MagiskManager-v6.0.1.apk from Dameon87's thread ( https://forum.xda-developers.com/oneplus-6t/how-to/9-0-7-patched-magisk-boot-img-t3875498 ) . Download ADB Tools if you don't have them ( https://developer.android.com/studio/releases/platform-tools#download ) and extract to a folder. Copy patched_boot-9.0.7.img to your PC’s ADB root directory (the directory with fastboot.exe and adb.exe).
On phone: Boot into OOS. Navigate to Setup->About Phone. Tap Build Number until you turn on Developer Options.
On phone: Navigate to System->Developer Options. Enable OEM Unlocking and USB Debugging.
STEP 2: UNLOCKING
Connect your phone to your PC. Click ok on the OEM Debugging prompt on your phone.
On PC: Open a command prompt [Windows: Start->type "cmd.exe"], and navigate to the ADB tools directory. Run this command in the command prompt:
Code:
adb reboot bootloader
The phone should reboot to the bootloader.
On PC: When phone finishes rebooting to the bootloader, run this command in the command prompt:
Code:
fastboot oem unlock
IMPORTANT: ALL DATA WILL BE ERASED WHEN YOU DO THIS, INCLUDING ANY PERSONAL DATA, TEXTS, PHOTOS, MUSIC, ETC. If the phone has been used, please move your files off your device first! The phone will take some time to factory reset.
On Phone: Repeat Preparation Steps 3-4 to turn back on OEM Debugging in OOS.
STEP 3: INSTALLING MAGISK
On PC: Copy MagiskManager-v6.0.1.apk to the phone.
On PC: In the command prompt window, run this command (note this .img file should be in the adb.exe and fastboot.exe directory):
Code:
fastboot boot patched_boot-9.0.7.img
Phone will reboot.
On Phone: Use a file manager app to install MagiskManager-v6.0.1.apk (I use Astro or ES, but admittedly there are probably better ones out there).
On Phone: Open the Magisk Manager App, agree to the setup popup, and click install. When prompted, choose Direct Install.
On Phone: Reboot.
On Phone: In the OS, open Magisk Manager again and add MagiskHide exceptions.
This enabled all apps that I typically need SafetyNet for, including Pokemon Go, Netflix and Google Pay, as well as of course all root apps like TItanium Backup.
Again, apologies if this seems basic, but I hope this is useful for some who don't know all of the inner workings of android unlocking and rooting by heart. If you have any improvements, feel free to suggest them.
You need to change adb oem unlock to fastboot oem unlock. Otherwise good job!
Dameon87 said:
You need to change adb oem unlock to fastboot oem unlock. Otherwise good job!
Click to expand...
Click to collapse
Ah, thanks! Fixed.
Does OTA update lock bootloader?
BesoC said:
Does OTA update lock bootloader?
Click to expand...
Click to collapse
No it doesn't, the root will be lost though.
geminium said:
No it doesn't, the root will be lost though.
Click to expand...
Click to collapse
I'm also a semi amateur at unlocking/rooting so I'm the target audience of the OP.
Ready to get my hands dirty and try it out. Last time I rooted it was on my old phone before Magisk was a thing.
I ended up not updating out of laziness.
Does magisk make OTA updates / keeping the phone up to date easier?
What's the best method for doing so if you want to keep your phone rooted?
spudsrus said:
I'm also a semi amateur at unlocking/rooting so I'm the target audience of the OP.
Ready to get my hands dirty and try it out. Last time I rooted it was on my old phone before Magisk was a thing.
I ended up not updating out of laziness.
Does magisk make OTA updates / keeping the phone up to date easier?
What's the best method for doing so if you want to keep your phone rooted?
Click to expand...
Click to collapse
Well there's quite detailed procedure explained on the forum. You'll find easily...
In general, you have to restore images in magisk, then install OOS OTA update, then install magisk to inactive slot... It's one of the easiest steps for keeping root and be up to date .
I've been rooting for almost a decade and I am grateful for this. I don't know why some of these devs always assume you know when their talking about using a PC or running shell commands. Lol. Everyone started as a noob.
Sent from my OnePlus6TSingle using XDA Labs
ScaryBugThing said:
NOTE: Since I am a semi-amateur at unlocking/rooting, this is not independent development. Instead, I noticed these forums don't seem to have a single one-stop guide that lays out the process for safely rooting the latest (9.0.7) Oxygen OS 9.0.7. This process may seem obvious to experts, but for people who are rusty or new to this, I wanted a process that didn't require lots of extra cross-referencing and research. I hope this is ok.
Big thanks to Dameon87 who supplied the patched boot rom, and deserves all the credit for the actual hard work with the patched boot image.
STEP 1: PREPARATION
Check that your phone is on 9.0.7.
On PC: Download patched_boot-9.0.7.img and MagiskManager-v6.0.1.apk from Dameon87's thread ( https://forum.xda-developers.com/oneplus-6t/how-to/9-0-7-patched-magisk-boot-img-t3875498 ) . Download ADB Tools if you don't have them ( https://developer.android.com/studio/releases/platform-tools#download ) and extract to a folder. Copy patched_boot-9.0.7.img to your PC’s ADB root directory (the directory with fastboot.exe and adb.exe).
On phone: Boot into OOS. Navigate to Setup->About Phone. Tap Build Number until you turn on Developer Options.
On phone: Navigate to System->Developer Options. Enable OEM Unlocking and USB Debugging.
STEP 2: UNLOCKING
Connect your phone to your PC. Click ok on the OEM Debugging prompt on your phone.
On PC: Open a command prompt [Windows: Start->type "cmd.exe"], and navigate to the ADB tools directory. Run this command in the command prompt:
Code:
adb reboot bootloader
The phone should reboot to the bootloader.
On PC: When phone finishes rebooting to the bootloader, run this command in the command prompt:
Code:
fastboot oem unlock
IMPORTANT: ALL DATA WILL BE ERASED WHEN YOU DO THIS, INCLUDING ANY PERSONAL DATA, TEXTS, PHOTOS, MUSIC, ETC. If the phone has been used, please move your files off your device first! The phone will take some time to factory reset.
On Phone: Repeat Preparation Steps 3-4 to turn back on OEM Debugging in OOS.
STEP 3: INSTALLING MAGISK
On PC: Copy MagiskManager-v6.0.1.apk to the phone.
On PC: In the command prompt window, run this command (note this .img file should be in the adb.exe and fastboot.exe directory):
Code:
fastboot boot patched_boot-9.0.7.img
Phone will reboot.
On Phone: Use a file manager app to install MagiskManager-v6.0.1.apk (I use Astro or ES, but admittedly there are probably better ones out there).
On Phone: Open the Magisk Manager App, agree to the setup popup, and click install. When prompted, choose Direct Install.
On Phone: Reboot.
On Phone: In the OS, open Magisk Manager again and add MagiskHide exceptions.
This enabled all apps that I typically need SafetyNet for, including Pokemon Go, Netflix and Google Pay, as well as of course all root apps like TItanium Backup.
Again, apologies if this seems basic, but I hope this is useful for some who don't know all of the inner workings of android unlocking and rooting by heart. If you have any improvements, feel free to suggest them.
Click to expand...
Click to collapse
Can you elaborate a bit more on how you got Pokemon Go working.
OS. 9.0.2 Magisk v18. Successfully rooted.
I'm selecting Pokemon Go under Magisk hide. But it still detects it. PoKe will sometimes run for about 30 secs then it gives me the error incompatible os.
Sent from my [device_name] using XDA-Developers Legacy app
Ok I'm new to this as well..I'm trying to understand the patched boot img part...so do u need the patched boot img for whichever oos ur currently running so to install magisk cleanly is that it...also I can't find the tutorial on how to install the ota's after ur rooted to where everything doesn't get erased etc..I need sumone to point me in the right area to look..I found a lil bit on it once but now I can't seem to find it..thx to everyone in this great community for all the time and effort all put into this. It's so easy to overlook all the hard work that gets done behind the scenes..so I just thank u personally for what u do for us...